# we all like colorful messages
if [ "$MSGCOLOR" != 'NO' ]; then
- if ! expr match "$(readlink -f /proc/$$/fd/1)" '/dev/pts/[0-9]\+' > /dev/null; then
+ if [ ! -t 1 ]; then # but check that we output to a terminal
export MSGCOLOR='NO'
fi
fi
CCMD="\033[1;35m" # pink
fi
-msgdie() { echo "${CERROR}E: $1${CNORMAL}" >&2; exit 1; }
-msgwarn() { echo "${CWARNING}W: $1${CNORMAL}" >&2; }
-msgmsg() { echo "${CMSG}$1${CNORMAL}"; }
-msginfo() { echo "${CINFO}I: $1${CNORMAL}"; }
-msgdebug() { echo "${CDEBUG}D: $1${CNORMAL}"; }
-msgdone() { echo "${CDONE}DONE${CNORMAL}"; }
-msgnwarn() { echo -n "${CWARNING}W: $1${CNORMAL}" >&2; }
-msgnmsg() { echo -n "${CMSG}$1${CNORMAL}"; }
-msgninfo() { echo -n "${CINFO}I: $1${CNORMAL}"; }
-msgndebug() { echo -n "${CDEBUG}D: $1${CNORMAL}"; }
+msgdie() { printf "${CERROR}E: $1${CNORMAL}\n" >&2; exit 1; }
+msgwarn() { printf "${CWARNING}W: $1${CNORMAL}\n" >&2; }
+msgmsg() { printf "${CMSG}$1${CNORMAL}\n"; }
+msginfo() { printf "${CINFO}I: $1${CNORMAL}\n"; }
+msgdebug() { printf "${CDEBUG}D: $1${CNORMAL}\n"; }
+msgdone() { printf "${CDONE}DONE${CNORMAL}\n"; }
+msgnwarn() { printf "${CWARNING}W: $1${CNORMAL}" >&2; }
+msgnmsg() { printf "${CMSG}$1${CNORMAL}"; }
+msgninfo() { printf "${CINFO}I: $1${CNORMAL}"; }
+msgndebug() { printf "${CDEBUG}D: $1${CNORMAL}"; }
msgtest() {
while [ -n "$1" ]; do
- echo -n "${CINFO}$1${CCMD} "
- echo -n "$(echo "$2" | sed -e 's#^apt\([cgfs]\)#apt-\1#')${CINFO} "
+ printf "${CINFO}$1${CCMD} "
+ printf -- "$(echo "$2" | sed -e 's#^apt\([cgfs]\)#apt-\1#')${CINFO} "
shift
if [ -n "$1" ]; then shift; else break; fi
done
- echo -n "…${CNORMAL} "
+ printf "…${CNORMAL} "
}
-msgpass() { echo "${CPASS}PASS${CNORMAL}"; }
-msgskip() { echo "${CWARNING}SKIP${CNORMAL}" >&2; }
+msgpass() { printf "${CPASS}PASS${CNORMAL}\n"; }
+msgskip() { printf "${CWARNING}SKIP${CNORMAL}\n" >&2; }
msgfail() {
- if [ $# -gt 0 ]; then echo "${CFAIL}FAIL: $*${CNORMAL}" >&2;
- else echo "${CFAIL}FAIL${CNORMAL}" >&2; fi
+ if [ $# -gt 0 ]; then printf "${CFAIL}FAIL: $*${CNORMAL}\n" >&2;
+ else printf "${CFAIL}FAIL${CNORMAL}\n" >&2; fi
EXIT_CODE=$((EXIT_CODE+1));
}
msgmsg() { true; }
msgnmsg() { true; }
msgtest() { true; }
- msgpass() { echo -n " ${CPASS}P${CNORMAL}"; }
- msgskip() { echo -n " ${CWARNING}S${CNORMAL}" >&2; }
+ msgpass() { printf " ${CPASS}P${CNORMAL}"; }
+ msgskip() { printf " ${CWARNING}S${CNORMAL}" >&2; }
if [ -n "$CFAIL" ]; then
- msgfail() { echo -n " ${CFAIL}FAIL${CNORMAL}" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
+ msgfail() { printf " ${CFAIL}FAIL${CNORMAL}" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
else
- msgfail() { echo -n " ###FAILED###" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
+ msgfail() { printf " ###FAILED###" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
fi
fi
if [ $MSGLEVEL -le 3 ]; then
[ "$1" = "die" -a $MSGLEVEL -le 0 ]; then
true;
else
- echo "${CDONE}DONE${CNORMAL}";
+ printf "${CDONE}DONE${CNORMAL}\n";
fi
}
getaptconfig() {
aptwebserver() { runapt "${APTWEBSERVERBINDIR}/aptwebserver" "$@"; }
aptitude() { runapt aptitude "$@"; }
aptextracttemplates() { runapt apt-extracttemplates "$@"; }
+aptinternalsolver() { runapt "${APTINTERNALSOLVER}" "$@"; }
dpkg() {
command dpkg --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log "$@"
shellsetedetector() {
local exit_status=$?
if [ "$exit_status" != '0' ]; then
- echo >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}"
+ printf >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}\n"
if [ "$EXIT_CODE" = '0' ]; then
EXIT_CODE="$exit_status"
fi
METHODSDIR=${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}
APTHELPERBINDIR=${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}
APTWEBSERVERBINDIR=${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}
+ APTINTERNALSOLVER=${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/apt-internal-solver"}
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
fi
}
+configdpkgnoopchroot() {
+ # create a library to noop chroot() and rewrite maintainer script executions
+ # via execvp() as used by dpkg as we don't want our rootdir to be a fullblown
+ # chroot directory dpkg could chroot into to execute the maintainer scripts
+ msgtest 'Building library to preload to make maintainerscript work in' 'dpkg'
+ cat << EOF > noopchroot.c
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <dlfcn.h>
+
+static char * chrootdir = NULL;
+
+int chroot(const char *path) {
+ printf("WARNING: CHROOTing to %s was ignored!\n", path);
+ free(chrootdir);
+ chrootdir = strdup(path);
+ return 0;
+}
+int execvp(const char *file, char *const argv[]) {
+ static int (*func_execvp) (const char *, char * const []) = NULL;
+ if (func_execvp == NULL)
+ func_execvp = (int (*) (const char *, char * const [])) dlsym(RTLD_NEXT, "execvp");
+ if (chrootdir == NULL || strncmp(file, "/var/lib/dpkg/", strlen("/var/lib/dpkg/")) != 0)
+ return func_execvp(file, argv);
+ printf("REWRITE execvp call %s into %s\n", file, chrootdir);
+ char newfile[strlen(chrootdir) + strlen(file)];
+ strcpy(newfile, chrootdir);
+ strcat(newfile, file);
+ return func_execvp(newfile, argv);
+}
+EOF
+ testsuccess --nomsg gcc -fPIC -shared -o noopchroot.so noopchroot.c -ldl
+
+ mkdir -p "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/"
+ DPKG="${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg"
+ echo "#!/bin/sh
+if [ -n \"\$LD_PRELOAD\" ]; then
+ export LD_PRELOAD=\"${TMPWORKINGDIRECTORY}/noopchroot.so \${LD_PRELOAD}\"
+else
+ export LD_PRELOAD=\"${TMPWORKINGDIRECTORY}/noopchroot.so\"
+fi
+dpkg \"\$@\"" > $DPKG
+ chmod +x $DPKG
+ sed -ie "s|^DPKG::options:: \"dpkg\";\$|DPKG::options:: \"$DPKG\";|" aptconfig.conf
+}
+
+configallowinsecurerepositories() {
+ echo "Acquire::AllowInsecureRepositories \"$1\";" > rootdir/etc/apt/apt.conf.d/allow-insecure-repositories.conf
+
+}
+
configcompression() {
while [ -n "$1" ]; do
case "$1" in
- '.') echo ".\t.\tcat";;
- 'gz') echo "gzip\tgz\tgzip";;
- 'bz2') echo "bzip2\tbz2\tbzip2";;
- 'lzma') echo "lzma\tlzma\txz --format=lzma";;
- 'xz') echo "xz\txz\txz";;
- *) echo "$1\t$1\t$1";;
+ '.') printf ".\t.\tcat\n";;
+ 'gz') printf "gzip\tgz\tgzip\n";;
+ 'bz2') printf "bzip2\tbz2\tbzip2\n";;
+ 'lzma') printf "lzma\tlzma\txz --format=lzma\n";;
+ 'xz') printf "xz\txz\txz\n";;
+ *) printf "$1\t$1\t$1\n";;
esac
shift
done > ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf
}
+forcecompressor() {
+ COMPRESSOR="$1"
+ COMPRESSOR_CMD="$1"
+ case $COMPRESSOR in
+ gzip) COMPRESS='gz';;
+ bzip2) COMPRESS='bz2';;
+ lzma) COMPRESS='lzma';;
+ xz) COMPRESS='xz';;
+ *) msgdie "Compressor $COMPRESSOR is unknown to framework, so can't be forced by forcecompressor!";;
+ esac
+ local CONFFILE="${TMPWORKINGDIRECTORY}/rootdir/etc/apt/apt.conf.d/00force-compressor"
+ echo "Acquire::CompressionTypes::Order { \"${COMPRESS}\"; };
+Dir::Bin::uncompressed \"/does/not/exist\";
+Dir::Bin::gzip \"/does/not/exist\";
+Dir::Bin::bzip2 \"/does/not/exist\";
+Dir::Bin::lzma \"/does/not/exist\";
+Dir::Bin::xz \"/does/not/exist\";" > "$CONFFILE"
+ if [ -e "/bin/${COMPRESSOR}" ]; then
+ echo "Dir::Bin::${COMPRESSOR} \"/bin/${COMPRESSOR}\";" >> "$CONFFILE"
+ elif [ -e "/usr/bin/${COMPRESSOR}" ]; then
+ echo "Dir::Bin::${COMPRESSOR} \"/usr/bin/${COMPRESSOR}\";" >> "$CONFFILE"
+ elif [ "${COMPRESSOR}" = 'lzma' ]; then
+ echo 'Dir::Bin::xz "/usr/bin/xz";' >> "$CONFFILE"
+ COMPRESSOR_CMD='xz --format=lzma'
+ else
+ msgtest 'Test for availability of compressor' "${COMPRESSOR}"
+ msgfail
+ fi
+}
+
setupsimplenativepackage() {
local NAME="$1"
local ARCH="$2"
fi
local BUILDDIR=${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}
- msgninfo "Build package ${NAME} in ${VERSION} for ${RELEASE} in ${DISTSECTION}… "
+ msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
mkdir -p $BUILDDIR/debian/source
echo "* most suckless software product ever" > ${BUILDDIR}/FEATURES
echo "#!/bin/sh
echo "Description: $DESCRIPTION" >> ${BUILDDIR}/debian/control
echo '3.0 (native)' > ${BUILDDIR}/debian/source/format
- (cd ${BUILDDIR}/..; dpkg-source -b ${NAME}-${VERSION} 2>&1) | sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' \
+ cd ${BUILDDIR}/..
+ testsuccess --nomsg dpkg-source -b ${NAME}-${VERSION}
+ cd - >/dev/null
+ sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' ${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output \
| while read SRC; do
echo "pool/${SRC}" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist
# if expr match "${SRC}" '.*\.dsc' >/dev/null 2>&1; then
done
for arch in $(getarchitecturesfromcommalist "$ARCH"); do
+ msgtest "Build binary package for ${RELEASE} in ${SECTION}" "$NAME"
rm -rf ${BUILDDIR}/debian/tmp
mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
local LOG="${BUILDDIR}/../${NAME}_${VERSION}_${arch}.dpkg-deb.log"
# ensure the right permissions as dpkg-deb ensists
chmod 755 ${BUILDDIR}/debian/tmp/DEBIAN
- if ! dpkg-deb -Z${COMPRESS_TYPE} --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/.. >$LOG 2>&1; then
- cat $LOG
- false
- fi
- rm $LOG
+ testsuccess --nomsg dpkg-deb -Z${COMPRESS_TYPE} --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/..
echo "pool/${NAME}_${VERSION}_${arch}.deb" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist
done
local ARCH=$(getarchitecture $4)
local PKGNAME="$(echo "$BUILDDIR" | grep -o '[^/]*$')"
local BUILDLOG="$(readlink -f "${BUILDDIR}/../${PKGNAME}_${RELEASE}_${SECTION}.dpkg-bp.log")"
- msgninfo "Build package ${PKGNAME} for ${RELEASE} in ${SECTION}… "
+ msgtest "Build package for ${RELEASE} in ${SECTION}" "$PKGNAME"
cd $BUILDDIR
if [ "$ARCH" = "all" ]; then
ARCH="$(dpkg-architecture -qDEB_HOST_ARCH 2> /dev/null)"
fi
- if ! dpkg-buildpackage -uc -us -a$ARCH >$BUILDLOG 2>&1 ; then
- cat $BUILDLOG
- false
- fi
+ testsuccess --nomsg dpkg-buildpackage -uc -us -a$ARCH
+ cp ${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output $BUILDLOG
local PKGS="$(grep '^dpkg-deb: building package' $BUILDLOG | cut -d'/' -f 2 | sed -e "s#'\.##")"
local SRCS="$(grep '^dpkg-source: info: building' $BUILDLOG | grep -o '[a-z0-9._+~-]*$')"
cd - > /dev/null
for SRC in $SRCS; do
echo "pool/${SRC}" >> ${TMPWORKINGDIRECTORY}/incoming/${RELEASE}.${SECTION}.srclist
done
- msgdone "info"
}
buildaptarchive() {
testempty() {
msgtest "Test for no output of" "$*"
- test -z "$($* 2>&1)" && msgpass || msgfail
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testempty.comparefile"
+ if $* >$COMPAREFILE 2>&1 && test ! -s $COMPAREFILE; then
+ msgpass
+ else
+ cat $COMPAREFILE
+ msgfail
+ fi
}
testequal() {
if [ -n "$MSG" ]; then
msgtest "$MSG" "$*"
fi
- $* 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ "$@" 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
}
testequalor2() {
projects / apt.git / blobdiff