# we all like colorful messages
if [ "$MSGCOLOR" != 'NO' ]; then
- if ! expr match "$(readlink -f /proc/$$/fd/1)" '/dev/pts/[0-9]\+' > /dev/null; then
+ if [ ! -t 1 ]; then # but check that we output to a terminal
export MSGCOLOR='NO'
fi
fi
CCMD="\033[1;35m" # pink
fi
-msgdie() { echo "${CERROR}E: $1${CNORMAL}" >&2; exit 1; }
-msgwarn() { echo "${CWARNING}W: $1${CNORMAL}" >&2; }
-msgmsg() { echo "${CMSG}$1${CNORMAL}"; }
-msginfo() { echo "${CINFO}I: $1${CNORMAL}"; }
-msgdebug() { echo "${CDEBUG}D: $1${CNORMAL}"; }
-msgdone() { echo "${CDONE}DONE${CNORMAL}"; }
-msgnwarn() { echo -n "${CWARNING}W: $1${CNORMAL}" >&2; }
-msgnmsg() { echo -n "${CMSG}$1${CNORMAL}"; }
-msgninfo() { echo -n "${CINFO}I: $1${CNORMAL}"; }
-msgndebug() { echo -n "${CDEBUG}D: $1${CNORMAL}"; }
-msgtest() {
- while [ -n "$1" ]; do
- echo -n "${CINFO}$1${CCMD} "
- echo -n "$(echo "$2" | sed -e 's#^apt\([cgfs]\)#apt-\1#')${CINFO} "
+msgprintf() {
+ local START="$1"
+ local MIDDLE="$2"
+ local END="$3"
+ shift 3
+ if [ -n "$1" ]; then
+ printf "$START " "$1"
shift
- if [ -n "$1" ]; then shift; else break; fi
- done
- echo -n "…${CNORMAL} "
+ while [ -n "$1" ]; do
+ printf "$MIDDLE " "$(echo "$1" | sed -e 's#^apt\([cgfs]\)#apt-\1#')"
+ shift
+ done
+ fi
+ printf "${END}"
+}
+msgdie() { msgprintf "${CERROR}E: %s" '%s' "${CNORMAL}\n" "$@" >&2; exit 1; }
+msgwarn() { msgprintf "${CWARNING}W: %s" '%s' "${CNORMAL}\n" "$@" >&2; }
+msgmsg() { msgprintf "${CMSG}%s" '%s' "${CNORMAL}\n" "$@"; }
+msginfo() { msgprintf "${CINFO}I: %s" '%s' "${CNORMAL}\n" "$@"; }
+msgdebug() { msgprintf "${CDEBUG}D: %s" '%s' "${CNORMAL}\n" "$@"; }
+msgdone() { msgprintf "${CDONE}DONE" '%s' "${CNORMAL}\n" "$@"; }
+msgnwarn() { msgprintf "${CWARNING}W: %s" '%s' "${CNORMAL}" "$@" >&2; }
+msgnmsg() { msgprintf "${CMSG}%s" '%s' "${CNORMAL}" "$@"; }
+msgninfo() { msgprintf "${CINFO}I: %s" '%s' "${CNORMAL}" "$@"; }
+msgndebug() { msgprintf "${CDEBUG}D: %s" '%s' "${CNORMAL}" "$@"; }
+msgtest() { msgprintf "${CINFO}%s" "${CCMD}%s${CINFO}" "…${CNORMAL} " "$@"; }
+msgpass() { printf "${CPASS}PASS${CNORMAL}\n"; }
+msgskip() {
+ if [ $# -gt 0 ]; then printf "${CWARNING}SKIP: $*${CNORMAL}\n" >&2;
+ else printf "${CWARNING}SKIP${CNORMAL}\n" >&2; fi
}
-msgpass() { echo "${CPASS}PASS${CNORMAL}"; }
-msgskip() { echo "${CWARNING}SKIP${CNORMAL}" >&2; }
msgfail() {
- if [ $# -gt 0 ]; then echo "${CFAIL}FAIL: $*${CNORMAL}" >&2;
- else echo "${CFAIL}FAIL${CNORMAL}" >&2; fi
+ if [ $# -gt 0 ]; then printf "${CFAIL}FAIL: $*${CNORMAL}\n" >&2;
+ else printf "${CFAIL}FAIL${CNORMAL}\n" >&2; fi
+ if [ -n "$APT_DEBUG_TESTS" ]; then
+ bash
+ fi
EXIT_CODE=$((EXIT_CODE+1));
}
msgmsg() { true; }
msgnmsg() { true; }
msgtest() { true; }
- msgpass() { echo -n " ${CPASS}P${CNORMAL}"; }
- msgskip() { echo -n " ${CWARNING}S${CNORMAL}" >&2; }
+ msgpass() { printf " ${CPASS}P${CNORMAL}"; }
+ msgskip() { printf " ${CWARNING}S${CNORMAL}" >&2; }
if [ -n "$CFAIL" ]; then
- msgfail() { echo -n " ${CFAIL}FAIL${CNORMAL}" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
+ msgfail() { printf " ${CFAIL}FAIL${CNORMAL}" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
else
- msgfail() { echo -n " ###FAILED###" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
+ msgfail() { printf " ###FAILED###" >&2; EXIT_CODE=$((EXIT_CODE+1)); }
fi
fi
if [ $MSGLEVEL -le 3 ]; then
[ "$1" = "die" -a $MSGLEVEL -le 0 ]; then
true;
else
- echo "${CDONE}DONE${CNORMAL}";
+ printf "${CDONE}DONE${CNORMAL}\n";
fi
}
getaptconfig() {
shift
runapt command gdb --quiet -ex run "${BUILDDIRECTORY}/$CMD" --args "${BUILDDIRECTORY}/$CMD" "$@"
}
-gpg() {
- # see apt-key for the whole trickery. Setup is done in setupenvironment
- command gpg --ignore-time-conflict --no-options --no-default-keyring \
- --homedir "${TMPWORKINGDIRECTORY}/gnupghome" \
- --no-auto-check-trustdb --trust-model always \
- "$@"
-}
exitwithstatus() {
# error if we about to overflow, but ...
shellsetedetector() {
local exit_status=$?
if [ "$exit_status" != '0' ]; then
- echo >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}"
+ printf >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}\n"
if [ "$EXIT_CODE" = '0' ]; then
EXIT_CODE="$exit_status"
fi
}
setupenvironment() {
+ # privilege dropping and testing doesn't work if /tmp isn't world-writeable (as e.g. with libpam-tmpdir)
+ if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$(stat --format '%a' "$TMPDIR")" != '1777' ]; then
+ unset TMPDIR
+ fi
TMPWORKINGDIRECTORY=$(mktemp -d)
- TESTDIRECTORY=$(readlink -f $(dirname $0))
+ addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY;"
msgninfo "Preparing environment for ${CCMD}$(basename $0)${CINFO} in ${TMPWORKINGDIRECTORY}… "
+ if [ "$(id -u)" = '0' ]; then
+ # relax permissions so that running as root with user switching works
+ umask 022
+ chmod o+rx "$TMPWORKINGDIRECTORY"
+ fi
+
+ TESTDIRECTORY=$(readlink -f $(dirname $0))
# allow overriding the default BUILDDIR location
BUILDDIRECTORY=${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}
LIBRARYPATH=${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
- addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY;"
cd $TMPWORKINGDIRECTORY
mkdir rootdir aptarchive keys
cd rootdir
mkdir -p etc/apt/apt.conf.d etc/apt/sources.list.d etc/apt/trusted.gpg.d etc/apt/preferences.d
- mkdir -p var/cache var/lib/apt var/log tmp
+ mkdir -p usr/bin var/cache var/lib/apt var/log tmp
mkdir -p var/lib/dpkg/info var/lib/dpkg/updates var/lib/dpkg/triggers
touch var/lib/dpkg/available
mkdir -p usr/lib/apt
cp "${TESTDIRECTORY}/${SOURCESSFILE}" aptarchive/Sources
fi
cp $(find $TESTDIRECTORY -name '*.pub' -o -name '*.sec') keys/
+ chmod 644 $(find keys -name '*.pub' -o -name '*.sec')
ln -s ${TMPWORKINGDIRECTORY}/keys/joesixpack.pub rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
+
echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" > aptconfig.conf
echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
echo "Debug::NoLocking \"true\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
echo "Dir::Bin::Methods \"${METHODSDIR}\";" >> aptconfig.conf
+ # store apt-key were we can access it, even if we run it as a different user
+ # destroys coverage reporting though, so just do it for root for now
+ if [ "$(id -u)" = '0' ]; then
+ cp "${BUILDDIRECTORY}/apt-key" "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/"
+ chmod o+rx "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/apt-key"
+ echo "Dir::Bin::apt-key \"${TMPWORKINGDIRECTORY}/rootdir/usr/bin/apt-key\";" >> aptconfig.conf
+ else
+ echo "Dir::Bin::apt-key \"${BUILDDIRECTORY}/apt-key\";" >> aptconfig.conf
+ fi
echo "Dir::Bin::dpkg \"fakeroot\";" >> aptconfig.conf
echo "DPKG::options:: \"dpkg\";" >> aptconfig.conf
echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
echo 'quiet::NoUpdate "true";' >> aptconfig.conf
echo 'quiet::NoStatistic "true";' >> aptconfig.conf
- echo "Acquire::https::CaInfo \"${TESTDIR}/apt.pem\";" > rootdir/etc/apt/apt.conf.d/99https
- echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
+ # too distracting for users, but helpful to detect changes
+ echo 'Acquire::Progress::Ignore::ShowErrorText "true";' >> aptconfig.conf
+ # in testcases, it can appear as if localhost has a rotation setup,
+ # hide this as we can't really deal with it properly
+ echo 'Acquire::Failure::ShowIP "false";' >> aptconfig.conf
+
+ cp "${TESTDIRECTORY}/apt.pem" "${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem"
+ if [ "$(id -u)" = '0' ]; then
+ chown _apt:root "${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem"
+ fi
+ echo "Acquire::https::CaInfo \"${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem\";" > rootdir/etc/apt/apt.conf.d/99https
+ echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
- # gpg needs a trustdb to function, but it can't be invalid (not even empty)
- # see also apt-key where this trickery comes from:
- local TRUSTDBDIR="${TMPWORKINGDIRECTORY}/gnupghome"
- mkdir "$TRUSTDBDIR"
- chmod 700 "$TRUSTDBDIR"
- # We also don't use a secret keyring, of course, but gpg panics and
- # implodes if there isn't one available - and writeable for imports
- local SECRETKEYRING="${TRUSTDBDIR}/secring.gpg"
- touch $SECRETKEYRING
- # now create the trustdb with an (empty) dummy keyring
- # newer gpg versions are fine without it, but play it safe for now
- gpg --quiet --check-trustdb --secret-keyring $SECRETKEYRING --keyring $SECRETKEYRING >/dev/null 2>&1
+ # Acquire::AllowInsecureRepositories=false is not yet the default
+ # but we want it to be the default soon
+ configallowinsecurerepositories "false";
# cleanup the environment a bit
# prefer our apt binaries over the system apt binaries
fi
}
+configallowinsecurerepositories() {
+ echo "Acquire::AllowInsecureRepositories \"$1\";" > rootdir/etc/apt/apt.conf.d/allow-insecure-repositories.conf
+
+}
+
configcompression() {
while [ -n "$1" ]; do
case "$1" in
- '.') echo ".\t.\tcat";;
- 'gz') echo "gzip\tgz\tgzip";;
- 'bz2') echo "bzip2\tbz2\tbzip2";;
- 'lzma') echo "lzma\tlzma\txz --format=lzma";;
- 'xz') echo "xz\txz\txz";;
- *) echo "$1\t$1\t$1";;
+ '.') printf ".\t.\tcat\n";;
+ 'gz') printf "gzip\tgz\tgzip\n";;
+ 'bz2') printf "bzip2\tbz2\tbzip2\n";;
+ 'lzma') printf "lzma\tlzma\txz --format=lzma\n";;
+ 'xz') printf "xz\txz\txz\n";;
+ *) printf "$1\t$1\t$1\n";;
esac
shift
done > ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf
}
+forcecompressor() {
+ COMPRESSOR="$1"
+ COMPRESSOR_CMD="$1"
+ case $COMPRESSOR in
+ gzip) COMPRESS='gz';;
+ bzip2) COMPRESS='bz2';;
+ lzma) COMPRESS='lzma';;
+ xz) COMPRESS='xz';;
+ *) msgdie "Compressor $COMPRESSOR is unknown to framework, so can't be forced by forcecompressor!";;
+ esac
+ local CONFFILE="${TMPWORKINGDIRECTORY}/rootdir/etc/apt/apt.conf.d/00force-compressor"
+ echo "Acquire::CompressionTypes::Order { \"${COMPRESS}\"; };
+Dir::Bin::uncompressed \"/does/not/exist\";
+Dir::Bin::gzip \"/does/not/exist\";
+Dir::Bin::bzip2 \"/does/not/exist\";
+Dir::Bin::lzma \"/does/not/exist\";
+Dir::Bin::xz \"/does/not/exist\";" > "$CONFFILE"
+ if [ -e "/bin/${COMPRESSOR}" ]; then
+ echo "Dir::Bin::${COMPRESSOR} \"/bin/${COMPRESSOR}\";" >> "$CONFFILE"
+ elif [ -e "/usr/bin/${COMPRESSOR}" ]; then
+ echo "Dir::Bin::${COMPRESSOR} \"/usr/bin/${COMPRESSOR}\";" >> "$CONFFILE"
+ elif [ "${COMPRESSOR}" = 'lzma' ]; then
+ echo 'Dir::Bin::xz "/usr/bin/xz";' >> "$CONFFILE"
+ COMPRESSOR_CMD='xz --format=lzma'
+ else
+ msgtest 'Test for availability of compressor' "${COMPRESSOR}"
+ msgfail
+ fi
+}
+
setupsimplenativepackage() {
local NAME="$1"
local ARCH="$2"
| while read SRC; do
echo "pool/${SRC}" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist
# if expr match "${SRC}" '.*\.dsc' >/dev/null 2>&1; then
-# gpg --yes --secret-keyring ./keys/joesixpack.sec \
-# --keyring ./keys/joesixpack.pub --default-key 'Joe Sixpack' \
+# aptkey --keyring ./keys/joesixpack.pub --secret-keyring ./keys/joesixpack.sec --quiet --readonly \
+# adv --yes --default-key 'Joe Sixpack' \
# --clearsign -o "${BUILDDIR}/../${SRC}.sign" "${BUILDDIR}/../$SRC"
# mv "${BUILDDIR}/../${SRC}.sign" "${BUILDDIR}/../$SRC"
# fi
aptftparchive -qq generate ftparchive.conf
cd - > /dev/null
msgdone "info"
- generatereleasefiles
+ generatereleasefiles "$@"
}
buildaptarchivefromfiles() {
}
setupaptarchive() {
- buildaptarchive
+ local NOUPDATE=0
+ if [ "$1" = '--no-update' ]; then
+ NOUPDATE=1
+ shift
+ fi
+ buildaptarchive "$@"
if [ -e aptarchive/dists ]; then
setupdistsaptarchive
else
setupflataptarchive
fi
- signreleasefiles
- if [ "$1" != '--no-update' ]; then
- msgninfo "\tSync APT's cache with the archive… "
- aptget update -qq
- msgdone "info"
+ signreleasefiles 'Joe Sixpack'
+ if [ "1" != "$NOUPDATE" ]; then
+ testsuccess aptget update -o Debug::pkgAcquire::Worker=true -o Debug::Acquire::gpgv=true
fi
}
signreleasefiles() {
local SIGNER="${1:-Joe Sixpack}"
- local GPG="gpg --batch --yes"
- msgninfo "\tSign archive with $SIGNER key… "
+ local REPODIR="${2:-aptarchive}"
+ local KEY="keys/$(echo "$SIGNER" | tr 'A-Z' 'a-z' | sed 's# ##g')"
+ local GPG="aptkey --quiet --keyring ${KEY}.pub --secret-keyring ${KEY}.sec --readonly adv --batch --yes"
+ msgninfo "\tSign archive with $SIGNER key $KEY… "
local REXKEY='keys/rexexpired'
local SECEXPIREBAK="${REXKEY}.sec.bak"
local PUBEXPIREBAK="${REXKEY}.pub.bak"
cp $SECUNEXPIRED ${REXKEY}.sec
cp $PUBUNEXPIRED ${REXKEY}.pub
else
- printf "expire\n1w\nsave\n" | $GPG --keyring ${REXKEY}.pub --secret-keyring ${REXKEY}.sec --command-fd 0 --edit-key "${SIGNER}" >/dev/null 2>&1 || true
+ if ! printf "expire\n1w\nsave\n" | $GPG --default-key "$SIGNER" --command-fd 0 --edit-key "${SIGNER}" >setexpire.gpg 2>&1; then
+ cat setexpire.gpg
+ exit 1
+ fi
cp ${REXKEY}.sec $SECUNEXPIRED
cp ${REXKEY}.pub $PUBUNEXPIRED
fi
fi
- for KEY in $(find keys/ -name '*.sec'); do
- GPG="$GPG --secret-keyring $KEY"
- done
- for KEY in $(find keys/ -name '*.pub'); do
- GPG="$GPG --keyring $KEY"
- done
- for RELEASE in $(find aptarchive/ -name Release); do
+ for RELEASE in $(find ${REPODIR}/ -name Release); do
$GPG --default-key "$SIGNER" --armor --detach-sign --sign --output ${RELEASE}.gpg ${RELEASE}
local INRELEASE="$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')"
$GPG --default-key "$SIGNER" --clearsign --output $INRELEASE $RELEASE
changetowebserver --no-rewrite "$@"
fi
echo "pid = ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid
-cert = ${TESTDIRECTORY}/apt.pem
+cert = ${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem
output = /dev/null
[https]
testempty() {
msgtest "Test for no output of" "$*"
- test -z "$($* 2>&1)" && msgpass || msgfail
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testempty.comparefile"
+ if "$@" >$COMPAREFILE 2>&1 && test ! -s $COMPAREFILE; then
+ msgpass
+ else
+ cat $COMPAREFILE
+ msgfail
+ fi
+ aptautotest 'testempty' "$@"
}
testequal() {
if [ -n "$MSG" ]; then
msgtest "$MSG" "$*"
fi
- $* 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ "$@" 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ aptautotest 'testequal' "$@"
}
testequalor2() {
echo "$2" > $COMPAREFILE2
shift 2
msgtest "Test for equality OR of" "$*"
- $* >$COMPAREAGAINST 2>&1 || true
+ "$@" >$COMPAREAGAINST 2>&1 || true
if checkdiff $COMPAREFILE1 $COMPAREAGAINST >/dev/null 2>&1 || \
checkdiff $COMPAREFILE2 $COMPAREAGAINST >/dev/null 2>&1
then
checkdiff $COMPAREFILE2 $COMPAREAGAINST || true
msgfail
fi
+ aptautotest 'testequalor2' "$@"
}
testshowvirtual() {
msgtest 'Test for successful execution of' "$*"
fi
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output"
- if $@ >${OUTPUT} 2>&1; then
- msgpass
+ if "$@" >${OUTPUT} 2>&1; then
+ if expr match "$1" '^apt.*' >/dev/null; then
+ if grep -q -E '^[WE]: ' "$OUTPUT"; then
+ echo >&2
+ cat >&2 $OUTPUT
+ msgfail 'successful run, but output contains warnings/errors'
+ else
+ msgpass
+ fi
+ else
+ msgpass
+ fi
else
+ local EXITCODE=$?
echo >&2
cat >&2 $OUTPUT
- msgfail
+ msgfail "exitcode $EXITCODE"
fi
+ aptautotest 'testsuccess' "$@"
+}
+testwarning() {
+ if [ "$1" = '--nomsg' ]; then
+ shift
+ else
+ msgtest 'Test for successful execution with warnings of' "$*"
+ fi
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output"
+ if "$@" >${OUTPUT} 2>&1; then
+ if expr match "$1" '^apt.*' >/dev/null; then
+ if grep -q -E '^E: ' "$OUTPUT"; then
+ echo >&2
+ cat >&2 $OUTPUT
+ msgfail 'successful run, but output contains errors'
+ elif ! grep -q -E '^W: ' "$OUTPUT"; then
+ echo >&2
+ cat >&2 $OUTPUT
+ msgfail 'successful run, but output contains no warnings'
+ else
+ msgpass
+ fi
+ else
+ msgpass
+ fi
+ else
+ local EXITCODE=$?
+ echo >&2
+ cat >&2 $OUTPUT
+ msgfail "exitcode $EXITCODE"
+ fi
+ aptautotest 'testwarning' "$@"
}
-
testfailure() {
if [ "$1" = '--nomsg' ]; then
shift
msgtest 'Test for failure in execution of' "$*"
fi
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfailure.output"
- if $@ >${OUTPUT} 2>&1; then
+ if "$@" >${OUTPUT} 2>&1; then
+ local EXITCODE=$?
echo >&2
cat >&2 $OUTPUT
- msgfail
+ msgfail "exitcode $EXITCODE"
else
+ local EXITCODE=$?
+ if expr match "$1" '^apt.*' >/dev/null; then
+ if ! grep -q -E '^E: ' "$OUTPUT"; then
+ echo >&2
+ cat >&2 $OUTPUT
+ msgfail "run failed with exitcode ${EXITCODE}, but with no errors"
+ else
+ msgpass
+ fi
+ else
+ msgpass
+ fi
+ fi
+ aptautotest 'testfailure' "$@"
+}
+
+testfilestats() {
+ msgtest "Test that file $1 has $2 $3" "$4"
+ if [ "$4" "$3" "$(stat --format "$2" "$1")" ]; then
msgpass
+ else
+ echo >&2
+ ls -l >&2 "$1"
+ echo -n >&2 "stat(1) reports for $2: "
+ stat --format "$2" "$1"
+ msgfail
fi
}
+testaccessrights() {
+ testfilestats "$1" '%a' '=' "$2"
+}
testwebserverlaststatuscode() {
local DOWNLOG='rootdir/tmp/webserverstatus-testfile.log'
local IGNORE
read IGNORE
}
+
+listcurrentlistsdirectory() {
+ find rootdir/var/lib/apt/lists -maxdepth 1 -type d | while read line; do
+ stat --format '%U:%G:%a:%n' "$line"
+ done
+ find rootdir/var/lib/apt/lists -maxdepth 1 \! -type d | while read line; do
+ stat --format '%U:%G:%a:%s:%y:%n' "$line"
+ done
+}
+
+### The following tests are run by most test methods automatically to check
+### general things about commands executed without writing the test every time.
+
+aptautotest() {
+ local TESTCALL="$1"
+ local CMD="$2"
+ local FIRSTOPT="$3"
+ local AUTOTEST="aptautotest_$(basename "$CMD" | tr -d '-')_$(echo "$FIRSTOPT" | tr -d '-')"
+ if command -v $AUTOTEST >/dev/null; then
+ shift 3
+ # save and restore the *.output files from other tests
+ # as we might otherwise override them in these automatic tests
+ rm -rf rootdir/tmp-before
+ mv rootdir/tmp rootdir/tmp-before
+ mkdir rootdir/tmp
+ $AUTOTEST "$TESTCALL" "$@"
+ rm -rf rootdir/tmp-aptautotest
+ mv rootdir/tmp rootdir/tmp-aptautotest
+ mv rootdir/tmp-before rootdir/tmp
+ fi
+}
+
+aptautotest_aptget_update() {
+ if ! test -d "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists"; then return; fi
+ # all copied files are properly chmodded
+ find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists" -maxdepth 1 -type f | while read file; do
+ testfilestats "$file" '%U:%G:%a' '=' "${USER}:${USER}:644"
+ done
+}
+aptautotest_apt_update() { aptautotest_aptget_update "$@"; }
projects / apt.git / blobdiff