+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>suite</literal> can specify an exact path, in which case the "
+#| "components must be omitted and <literal>suite</literal> must end with a "
+#| "slash (<literal>/</literal>). This is useful for the case when only a "
+#| "particular sub-section of the archive denoted by the URI is of interest. "
+#| "If <literal>suite</literal> does not specify an exact path, at least one "
+#| "<literal>component</literal> must be present."
+msgid ""
+"The URI for the <literal>deb</literal> type must specify the base of the "
+"Debian distribution, from which APT will find the information it needs. "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-directory of the archive denoted by the URI is of interest. "
+"If <literal>suite</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
+msgstr ""
+"Die URI für den <literal>deb</literal>-Typ muss die Basis der Debian-"
+"Distribution angeben, wo APT die Informationen findet, die es benötigt. "
+"<literal>Suite</literal> kann einen genauen Pfad angeben. In diesem Fall "
+"müssen die Komponenten weggelassen werden und <literal>Suite</literal> muss "
+"mit einem Schrägstrich (<literal>/</literal>) enden. Dies ist nützlich, wenn "
+"nur ein bestimmter Unterabschnitt des von der URI angegebenen Archivs von "
+"Interesse ist. Wenn <literal>Suite</literal> keinen genauen Pfad angibt, "
+"muss mindestens eine <literal>Komponente</literal> angegeben sein."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+#| "literal> which expands to the Debian architecture (such as "
+#| "<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
+#| "This permits architecture-independent <filename>sources.list</filename> "
+#| "files to be used. In general this is only of interest when specifying an "
+#| "exact path, <literal>APT</literal> will automatically generate a URI with "
+#| "the current architecture otherwise."
+msgid ""
+"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+"literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path; "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>Suite</literal> könnte außerdem eine Variable, <literal>$(ARCH)</"
+"literal>, enthalten, die zur Debian-Architektur (wie <literal>amd64</"
+"literal> oder <literal>armel</literal>) expandiert wird, die auf dem System "
+"benutzt wird. Dies erlaubt es, architekturunabhängige <filename>sources."
+"list</filename>-Dateien zu benutzen. Im Allgemeinen ist dies nur von "
+"Interesse, wenn ein genauer Pfad angegeben wird, andernfalls wird "
+"<literal>APT</literal> automatisch eine URI mit der aktuellen Architektur "
+"generieren."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "In the traditional style sources.list format since only one distribution "
+#| "can be specified per line it may be necessary to have multiple lines for "
+#| "the same URI, if a subset of all available distributions or components at "
+#| "that location is desired. APT will sort the URI list after it has "
+#| "generated a complete set internally, and will collapse multiple "
+#| "references to the same Internet host, for instance, into a single "
+#| "connection, so that it does not inefficiently establish an FTP "
+#| "connection, close it, do something else, and then re-establish a "
+#| "connection to that same host. This feature is useful for accessing busy "
+#| "FTP sites with limits on the number of simultaneous anonymous users. APT "
+#| "also parallelizes connections to different hosts to more effectively deal "
+#| "with sites with low bandwidth."
+msgid ""
+"Especially in the one-line-style format since only one distribution can be "
+"specified per line it may be necessary to have multiple lines for the same "
+"URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish a connection, close it, do something else, and then "
+"re-establish a connection to that same host. APT also parallelizes "
+"connections to different hosts to more effectively deal with sites with low "
+"bandwidth."
+msgstr ""
+"In der Sources.list im herkömmlichen Formatstil könnte es nötig sein, da pro "
+"Zeile nur eine Distribution angegeben werden kann, mehrere Zeilen für die "
+"gleiche URI zu haben, falls eine Untermenge aller verfügbarer Distributionen "
+"oder Komponenten von diesem Ort gewünscht wird. APT wird die URI-Liste "
+"sortieren, nachdem es intern eine komplette Zusammenstellung generiert hat "
+"und es wird mehrere Bezüge zum gleichen Internet-Rechner zusammenfassen, zum "
+"Beispiel zu einer einzigen Verbindung, so dass es nicht ineffizient FTP-"
+"Verbindungen herstellt, sie schließt, sonst etwas tut und dann erneut eine "
+"Verbindung zum gleichen Rechner herstellt. Diese Funktion ist nützlich für "
+"den Zugriff auf ausgelastete FTP-Sites mit Begrenzungen der Anzahl "
+"gleichzeitiger anonymer Anwender. APT parallelisiert außerdem Verbindungen "
+"zu verschiedenen Rechnern, um effektiver mit Orten niedriger Bandbreite "
+"hauszuhalten."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+"Es ist wichtig, die Quellen in der Reihenfolge ihrer Wichtigkeit "
+"aufzulisten, die bevorzugte Quelle zuerst. Typischerweise resultiert dies in "
+"einer Sortierung nach Geschwindigkeit, vom schnellsten zum langsamsten (CD-"
+"ROM, gefolgt von Rechnern im lokalen Netzwerk, gefolgt von Internet-"
+"Rechnern, zum Beispiel)."
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-list-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-sources-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src types: Options"
+msgstr "Die Typen deb und deb-src"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
+"the option to modify them based on the default, but we aren't listing those "
+"names explicitly here. Unsupported options are silently ignored by all APT "
+"versions."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Architectures</option> (<option>arch</option>) is a multivalue "
+"option defining for which architectures information should be downloaded. If "
+"this option isn't set the default is all architectures as defined by the "
+"<option>APT::Architectures</option> config option."
+msgstr ""
+"<literal>arch=<replaceable>Architektur1</replaceable>,"
+"<replaceable>Architektur2</replaceable>, …</literal> kann benutzt werden, um "
+"anzugeben, für welche Architekturen Paketinformationen heruntergeladen "
+"werden sollen. Falls diese Option nicht gesetzt ist, werden alle durch die "
+"Option <literal>APT::Architectures</literal> definierten Architekturen "
+"heruntergeladen."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Languages</option> (<option>lang</option>) is a multivalue option "
+"defining for which languages information such as translated package "
+"descriptions should be downloaded. If this option isn't set the default is "
+"all languages as defined by the <option>Acquire::Languages</option> config "
+"option."
+msgstr ""
+"<literal>arch=<replaceable>Architektur1</replaceable>,"
+"<replaceable>Architektur2</replaceable>, …</literal> kann benutzt werden, um "
+"anzugeben, für welche Architekturen Paketinformationen heruntergeladen "
+"werden sollen. Falls diese Option nicht gesetzt ist, werden alle durch die "
+"Option <literal>APT::Architectures</literal> definierten Architekturen "
+"heruntergeladen."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Targets</option> (<option>target</option>) is a multivalue option "
+"defining which download targets apt will try to acquire from this source. If "
+"not specified, the default set is defined by the <option>Acquire::"
+"IndexTargets</option> configuration scope. Additionally, specific targets "
+"can be enabled or disabled by using the identifier as field name instead of "
+"using this multivalue option."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>PDiffs</option> (<option>pdiffs</option>) is a yes/no value which "
+"controls if APT should try to use PDiffs to update old indexes instead of "
+"downloading the new indexes entirely. The value of this option is ignored if "
+"the repository doesn't announce the availability of PDiffs. Defaults to the "
+"value of the option with the same name for a specific index file defined in "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
+"the value of configuration option <option>Acquire::PDiffs</option> which "
+"defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
+"activates/disables the use of this feature if this source indicates support "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
+"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
+"sources with the same URI and Suite, so they have to be set on all such "
+"entries and can not be varied between different components. APT will try to "
+"detect and error out on such anomalies."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Signed-By</option> (<option>signed-by</option>) is either an "
+"absolute path to a keyring file (has to be accessible and readable for the "
+"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
+"file) or a fingerprint of a key either in the <filename>trusted.gpg</"
+"filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</"
+"filename> directory (see <command>apt-key fingerprint</command>). If the "
+"option is set, only the key(s) in this keyring or only the key with this "
+"fingerprint is used for the &apt-secure; verification of this repository. "
+"Otherwise all keys in the trusted keyrings are considered valid signers for "
+"this repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
+"a yes/no value which controls if APT should try to detect replay attacks. A "
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Valid-Until-Min</option> (<option>valid-until-min</option>) and "
+"<option>Valid-Until-Max</option> (<option>valid-until-max</option>) can be "
+"used to raise or lower the time period in seconds in which the data from "
+"this repository is considered valid. -Max can be especially useful if the "
+"repository provides no Valid-Until field on its Release file to set your own "
+"value, while -Min can be used to increase the valid time on seldom updated "
+"(local) mirrors of a more frequently updated but less accessible archive "
+"(which is in the sources.list as well) instead of disabling the check "
+"entirely. Default to the value of the configuration options "
+"<option>Acquire::Min-ValidTime</option> and <option>Acquire::Max-ValidTime</"
+"option> which are both unset by default."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "URI specification"
+msgid "URI Specification"
+msgstr "URI-Beschreibung"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "The currently recognized URI types are:"
+msgstr "Die derzeit zulässigen URI-Typen sind:"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The file scheme allows an arbitrary directory in the file system to be "
+"considered an archive. This is useful for NFS mounts and local mirrors or "
+"archives."
+msgstr ""
+"Das file-Schema erlaubt es einem beliebigen Verzeichnis im Dateisystem, als "
+"Archiv betrachtet zu werden. Dies ist nützlich für eingehängtes NFS und "
+"lokale Spiegel oder Archive."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
+"Use the &apt-cdrom; program to create cdrom entries in the source list."
+msgstr ""
+"Das cdrom-Schema erlaubt APT ein lokales CD-ROM-Laufwerk mit Medienwechsel "
+"zu benutzen. Benutzen Sie das Programm &apt-cdrom;, um CD-ROM-Einträge in "
+"der Quellenliste zu erstellen."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The http scheme specifies an HTTP server for the archive. If an environment "
+"variable <envar>http_proxy</envar> is set with the format http://server:"
+"port/, the proxy server specified in <envar>http_proxy</envar> will be used. "
+"Users of authenticated HTTP/1.1 proxies may use a string of the format "
+"http://user:pass@server:port/. Note that this is an insecure method of "
+"authentication."
+msgstr ""
+"Das http-Schema gibt einen HTTP-Server für das Archiv an. Wenn eine "
+"Umgebungsvariable <envar>http_proxy</envar> mit dem Format http://Server:"
+"Port/ gesetzt ist, wird der in <envar>http_proxy</envar> angegebene Proxy-"
+"Server benutzt. Anwender eines HTTP/1.1-authentifizierten Proxys können eine "
+"Zeichenkette mit dem Format http://Anwender:Passwort@Server:Port/ benutzt. "
+"Beachten Sie, dass dies eine unsichere Authentifizierungsmethode ist."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
+"is highly configurable; for more information see the &apt-conf; manual page. "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
+"ignored."
+msgstr ""
+"Das ftp-Schema gibt einen FTP-Server für das Archiv an. Das FTP-Verhalten "
+"von APT ist in hohem Maße konfigurierbar. Um weitere Informationen zu "
+"erhalten, lesen Sie die &apt-conf;-Handbuchseite. Bitte beachten Sie, dass "
+"ein FTP-Proxy durch Benutzung der <envar>ftp_proxy</envar>-"
+"Umgebungsvariablen angegeben werden kann. Es ist mittels dieser "
+"Umgebungsvariable und <emphasis>nur</emphasis> dieser Umgebungsvariable "
+"möglich, einen HTTP-Proxy anzugeben (HTTP-Proxy-Server verstehen oft auch "
+"FTP-URLs). FTP-Proxys, die gemäß Angabe in der Konfigurationsdatei HTTP "
+"benutzen, werden ignoriert."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The copy scheme is identical to the file scheme except that packages are "
+"copied into the cache directory instead of used directly at their location. "
+"This is useful for people using removable media to copy files around with "
+"APT."
+msgstr ""
+"Das copy-Schema ist identisch mit dem file-Schema, außer dass Pakete in das "
+"Zwischenspeicherverzeichnis kopiert werden, anstatt direkt von ihrem "
+"Herkunftsort benutzt zu werden. Dies ist für Leute nützlich, die "
+"Wechseldatenträger benutzen, um Dateien mit APT umherzukopieren."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
+msgstr ""
+"Die rsh/ssh-Methode ruft RSH/SSH auf, um sich mit einem Rechner in der Ferne "
+"zu verbinden und als angegebener Benutzer auf die Dateien zuzugreifen. Es "
+"wird empfohlen, vorher Rhosts und RSA-Schlüssel zu konfigurieren. Für die "
+"Übertragung von Dateien aus der Ferne werden die Standardbefehle "
+"<command>find</command> und <command>dd</command> verwandt."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
+#: sources.list.5.xml
+msgid "adding more recognizable URI types"
+msgstr "weitere zulässige URI-Typen hinzufügen"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
+"transport-debtorrent;."
+msgstr ""
+"APT kann mit weiteren Methoden, die in anderen optionalen Paketen geliefert "
+"werden, die dem Namensschema <literal>apt-transport-<replaceable>Methode</"
+"replaceable></literal> folgen sollten, erweitert werden. Das APT-Team "
+"betreut zum Beispiel außerdem das Paket <literal>apt-transport-https</"
+"literal>, das Zugriffsmethoden für HTTPS-URIs mit Funktionen bereitstellt, "
+"die denen der HTTP-Methode ähneln. Außerdem sind z.B. Methoden für die "
+"Benutzung von debtorrent verfügbar – siehe &apt-transport-debtorrent;."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Uses the archive stored locally (or NFS mounted) at /home/jason/debian "
+#| "for stable/main, stable/contrib, and stable/non-free."
+msgid ""
+"Uses the archive stored locally (or NFS mounted) at /home/apt/debian for "
+"stable/main, stable/contrib, and stable/non-free."
+msgstr ""
+"Benutzt die lokal gespeicherten (oder per NFS eingehängten) Archive in /home/"
+"jason/debian für stable/main, stable/contrib und stable/non-free."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgid "deb file:/home/apt/debian stable main contrib non-free"
+msgstr "deb file:/home/jason/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+msgstr "deb file:/home/jason/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "As above, except this uses the unstable (development) distribution."
+msgstr ""
+"wie oben, außer das dies die »unstable«- (Entwicklungs-) Distribution "
+"benutzt."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgid "deb file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr "deb file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."
+msgstr "Quellzeile für obiges"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgid "deb-src file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb-src file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgid ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr "deb-src file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"The first line gets package information for the architectures in "
+"<literal>APT::Architectures</literal> while the second always retrieves "
+"<literal>amd64</literal> and <literal>armel</literal>."
+msgstr ""
+"Die erste Zeile bekommt Paketinformationen für die Architekturen in "
+"<literal>APT::Architectures</literal>, während die zweite immer "
+"<literal>amd64</literal> und <literal>armel</literal> holt."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid ""
+#| "deb http://ftp.debian.org/debian &stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+msgid ""
+"deb http://httpredir.debian.org/debian &stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &stable-codename; main"
+msgstr ""
+"deb http://ftp.debian.org/debian &stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid ""
+#| "deb http://ftp.debian.org/debian &stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+msgid ""
+"Types: deb\n"
+"URIs: http://httpredir.debian.org/debian\n"
+"Suites: &stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://httpredir.debian.org/debian\n"
+"Suites: &stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+msgstr ""
+"deb http://ftp.debian.org/debian &stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to access the archive at archive.debian.org, and uses only the "
+"hamm/main area."
+msgstr ""
+"benutzt HTTP, um auf das Archiv auf archive.debian.org zuzugreifen und nur "
+"den hamm/main-Bereich zu benutzen."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgid ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the &stable-codename;/contrib area."
+msgstr ""
+"benutzt FTP, um auf das Archiv auf archive.debian.org unter dem debian-"
+"Verzeichnis zuzugreifen und nur den &stable-codename;/contrib-Bereich zu "
+"benutzen."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: &stable-codename;\n"
+"Components: contrib"
+msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the unstable/contrib area. If this line appears as "
+"well as the one in the previous example in <filename>sources.list</filename> "
+"a single FTP session will be used for both resource lines."
+msgstr ""
+"benutzt FTP, um auf das Archiv auf ftp.debian.org unter dem debian-"
+"Verzeichnis zuzugreifen und nur den unstable/contrib-Bereich zu benutzen. "
+"Falls diese Zeile zusammen mit der aus dem vorherigen Beispiel in der Datei "
+"<filename>sources.list</filename> auftaucht, wird eine einzelne FTP-Sitzung "
+"für beide Quellzeilen benutzt."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgid ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+#| "directory, and uses only files found under <filename>unstable/binary-"
+#| "i386</filename> on i386 machines, <filename>unstable/binary-amd64</"
+#| "filename> on amd64, and so forth for other supported architectures. [Note "
+#| "this example only illustrates how to use the substitution variable; "
+#| "official debian archives are not structured like this] <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+"directory, and uses only files found under <filename>unstable/binary-i386</"
+"filename> on i386 machines, <filename>unstable/binary-amd64</filename> on "
+"amd64, and so forth for other supported architectures. [Note this example "
+"only illustrates how to use the substitution variable; official debian "
+"archives are not structured like this] <placeholder type=\"literallayout\" "
+"id=\"0\"/> <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+"benutzt HTTP, um auf das Archiv auf ftp.tlh.debian.org unter dem universe-"
+"Verzeichnis zuzugreifen und benutzt nur Dateien, die unter "
+"<filename>unstable/binary-i386</filename> auf i386-Maschinen, "
+"<filename>unstable/binary-amd64</filename> auf amd64 und so weiter für "
+"andere unterstützte Architekturen, gefunden werden. [Beachten Sie, dass "
+"dieses Beispiel nur anschaulich macht, wie die Platzhaltervariable benutzt "
+"wird. Offizielle Debian-Archive sind nicht so strukturiert.] <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to get binary packages as well as sources from the stable, testing "
+"and unstable suites and the components main and contrib."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://httpredir.debian.org/debian stable main contrib\n"
+"deb-src http://httpredir.debian.org/debian stable main contrib\n"
+"deb http://httpredir.debian.org/debian testing main contrib\n"
+"deb-src http://httpredir.debian.org/debian testing main contrib\n"
+"deb http://httpredir.debian.org/debian unstable main contrib\n"
+"deb-src http://httpredir.debian.org/debian unstable main contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb deb-src\n"
+"URIs: http://httpredir.debian.org/debian\n"
+"Suites: stable testing unstable\n"
+"Components: main contrib\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "&apt-cache; &apt-conf;"
+msgid "&apt-get;, &apt-conf;"
+msgstr "&apt-cache; &apt-conf;"
+
+#. type: Content of: <refentry><refmeta><manvolnum>
+#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "1"
+msgstr "1"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
+msgstr ""
+"Hilfsprogramm zum Extrahieren der <command>debconf</command>-Konfiguration "
+"und Schablonen von Debian-Paketen"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> will take one or more Debian package "
+"files as input and write out (to a temporary directory) all associated "
+"config scripts and template files. For each passed in package that contains "
+"config scripts and templates, one line of output will be generated in the "
+"format:"
+msgstr ""
+"<command>apt-extracttemplates</command> nimmt als Eingabe ein oder mehrere "
+"Debian-Paketdateien entgegen und schreibt alle verbundenen "
+"Konfigurationsskripte und Schablonendateien (in ein temporäres Verzeichnis) "
+"heraus. Für jedes übergebene Paket das Konfigurationsskripte und "
+"Schablonendateien enthält, wird eine Ausgabezeile in folgendem Format "
+"generiert:"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid "package version template-file config-script"
+msgstr "Paket Version Schablonendatei Konfigurationsskript"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"template-file and config-script are written to the temporary directory "
+"specified by the <option>-t</option> or <option>--tempdir</option> "
+"(<literal>APT::ExtractTemplates::TempDir</literal>) directory, with "
+"filenames of the form <filename>package.template.XXXXXX</filename> and "
+"<filename>package.config.XXXXXX</filename>"
+msgstr ""
+"Schablonendatei und Konfigurationsskript werden in das temporäre Verzeichnis "
+"geschrieben, das durch das Verzeichnis <option>-t</option> oder <option>--"
+"tempdir</option> (<literal>APT::ExtractTemplates::TempDir</literal>) mit "
+"Dateinamen der Form <filename>package. template.XXXXXX</filename> und "
+"<filename>package.config.XXXXXX</filename> angegeben wurde."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Temporary directory in which to write extracted <command>debconf</command> "
+"template files and config scripts. Configuration Item: <literal>APT::"
+"ExtractTemplates::TempDir</literal>"
+msgstr ""
+"temporäres Verzeichnis, in das die extrahierten <command>debconf</command>-"
+"Schablonendateien und Konfigurationsdateien geschrieben werden. "
+"Konfigurationselement: <literal>APT::ExtractTemplates::TempDir</literal>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> returns zero on normal operation, "
+"decimal 100 on error."
+msgstr ""
+"<command>apt-extracttemplates</command> gibt bei normalen Operationen 0 "
+"zurück, dezimal 100 bei Fehlern."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-sortpkgs.1.xml
+msgid "Utility to sort package index files"
+msgstr "Werkzeug zum Sortieren von Paketindexdateien"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> will take an index file (source index or "
+"package index) and sort the records so that they are ordered by the package "
+"name. It will also sort the internal fields of each record according to the "
+"internal sorting rules."
+msgstr ""
+"<command>apt-sortpkgs</command> nimmt eine Indexdatei (Quell- oder "
+"Paketindex) und sortiert die Datensätze nach Paketnamen. Es wird außerdem "
+"die internen Felder jedes Datensatzes gemäß interner Sortierregeln sortieren."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"All output is sent to standard output; the input must be a seekable file."
+msgstr ""
+"Alle Ausgaben werden an die Standardausgabe gesandt, die Eingabe muss eine "
+"durchsuchbare Datei sein."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"Use source index field ordering. Configuration Item: <literal>APT::"
+"SortPkgs::Source</literal>."
+msgstr ""
+"Quellindexfeldanordnung benutzen. Konfigurationselement: <literal>APT::"
+"SortPkgs::Source</literal>."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
+"100 on error."
+msgstr ""
+"<command>apt-sortpkgs</command> gibt bei normalen Operationen 0 zurück, "
+"dezimal 100 bei Fehlern."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-ftparchive.1.xml
+msgid "Utility to generate index files"
+msgstr "Hilfsprogramm zum Generieren von Indexdateien"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is the command line tool that generates "
+"the index files that APT uses to access a distribution source. The index "
+"files should be generated on the origin site based on the content of that "
+"site."
+msgstr ""
+"<command>apt-ftparchive</command> ist das Befehlszeilenwerkzeug, das "
+"Indexdateien generiert, die APT zum Zugriff auf eine Distributionsquelle "
+"benutzt. Die Indexdateien sollten auf der Ursprungs-Site auf Basis des "
+"Inhalts dieser Stelle generiert werden."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
+"program, incorporating its entire functionality via the <literal>packages</"
+"literal> command. It also contains a contents file generator, "
+"<literal>contents</literal>, and an elaborate means to 'script' the "
+"generation process for a complete archive."
+msgstr ""
+"<command>apt-ftparchive</command> ist eine Obermenge des &dpkg-scanpackages;-"
+"Programms, das dessen ganze Funktionalität über den <literal>packages</"
+"literal>-Befehl enthält ist ein durchdachtes Mittel den Generierungsprozess "
+"für ein komplettes Archiv zu »skripten«."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Internally <command>apt-ftparchive</command> can make use of binary "
+"databases to cache the contents of a .deb file and it does not rely on any "
+"external programs aside from &gzip;. When doing a full generate it "
+"automatically performs file-change checks and builds the desired compressed "
+"output files."
+msgstr ""
+"Intern kann <command>apt-ftparchive</command> von Programmdatenbanken "
+"Gebrauch machen, um die Inhalte einer .deb-Datei zwischenzuspeichern und es "
+"verlasst sich nicht auf irgendwelche externen Programme, abgesehen von "
+"&gzip;. Wenn eine vollständige Generierung erfolgt, werden automatisch "
+"Dateiänderungsprüfungen durchgeführt und die gewünschten gepackten "
+"Ausgabedateien erzeugt."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The packages command generates a package file from a directory tree. It "
+"takes the given directory and recursively searches it for .deb files, "
+"emitting a package record to stdout for each. This command is approximately "
+"equivalent to &dpkg-scanpackages;."
+msgstr ""
+"Der »packages«-Befehl generiert eine Paketdatei aus einem Verzeichnisbaum. "
+"Er nimmt ein vorgegebenes Verzeichnis und durchsucht es rekursiv nach .deb-"
+"Dateien, wobei es für jede einen Paketdatensatz auf stdout ausgibt.Dieser "
+"Befehl entspricht etwa &dpkg-scanpackages;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The option <option>--db</option> can be used to specify a binary caching DB."
+msgstr ""
+"Die Option <option>--db</option> kann benutzt werden, um eine Datenbank zum "
+"Zwischenspeichern von Programmen anzugeben."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>sources</literal> command generates a source index file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .dsc files, emitting a source record to stdout for each. This command is "
+"approximately equivalent to &dpkg-scansources;."
+msgstr ""
+"Der <literal>sources</literal>-Befehl generiert eine Quellenindexdatei aus "
+"einem Verzeichnisbaum. Er nimmt ein vorgegebenes Verzeichnis und durchsucht "
+"es rekursiv nach .dsc-Dateien, wobei es für jede einen Quelldatensatz auf "
+"stdout ausgibt. Dieser Befehl entspricht etwa &dpkg-scansources;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"If an override file is specified then a source override file will be looked "
+"for with an extension of .src. The --source-override option can be used to "
+"change the source override file that will be used."
+msgstr ""
+"Wenn eine Override-Datei angegeben ist, wird nach einer Quellen-Override-"
+"Datei mit einer .src-Dateiendung gesucht. Die Option »--source-override« "
+"kann benutzt werden, um die Quellen-Override-Datei, die benutzt wird, zu "
+"ändern."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>contents</literal> command generates a contents file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .deb files, and reads the file list from each file. It then sorts and "
+"writes to stdout the list of files matched to packages. Directories are not "
+"written to the output. If multiple packages own the same file then each "
+"package is separated by a comma in the output."
+msgstr ""
+"Der <literal>contents</literal>-Befehl generiert eine Inhaltsdatei aus einem "
+"Verzeichnisbaum. Er nimmt ein vorgegebenes Verzeichnis und durchsucht es "
+"rekursiv nach .deb-Dateien und liest die Dateiliste von jeder Datei. Dann "
+"sortiert er die Liste der passenden Pakete und schreibt sie nach stdout. "
+"Verzeichnisse werden nicht in die Ausgabe geschrieben. Falls mehrere Pakete "
+"die gleiche Datei besitzen, dann befindet sich jedes Paket durch Komma "
+"getrennt in der Ausgabe."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>release</literal> command generates a Release file from a "
+#| "directory tree. It recursively searches the given directory for "
+#| "uncompressed <filename>Packages</filename> and <filename>Sources</"
+#| "filename> files and ones compressed with <command>gzip</command>, "
+#| "<command>bzip2</command> or <command>lzma</command> as well as "
+#| "<filename>Release</filename> and <filename>md5sum.txt</filename> files by "
+#| "default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+#| "Additional filename patterns can be added by listing them in "
+#| "<literal>APT::FTPArchive::Release::Patterns</literal>. It then writes to "
+#| "stdout a <filename>Release</filename> file containing an MD5, SHA1 and "
+#| "SHA256 digest for each file."
+msgid ""
+"The <literal>release</literal> command generates a Release file from a "
+"directory tree. It recursively searches the given directory for uncompressed "
+"<filename>Packages</filename> and <filename>Sources</filename> files and "
+"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
+"<command>lzma</command> as well as <filename>Release</filename> and "
+"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
+"Release::Default-Patterns</literal>). Additional filename patterns can be "
+"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
+"literal>. It then writes to stdout a <filename>Release</filename> file "
+"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file."
+msgstr ""
+"Der Befehl <literal>release</literal> erzeugt eine Release-Datei aus einem "
+"Verzeichnisbaum. Standardmäßig durchsucht er rekursiv das angegebene "
+"Verzeichnis nach nicht komprimierten <filename>Packages</filename>- und "
+"<filename>Sources</filename>-Dateien und denen, die mit <command>gzip</"
+"command>, <command>bzip2</command> oder <command>lzma</command> komprimiert "
+"wurden, ebenso wie <filename>Release</filename>- und <filename>md5sum.txt</"
+"filename>-Dateien (<literal>APT::FTPArchive::Release::Default-Patterns</"
+"literal>). Zusätzliche Muster für Dateinamen können hinzugefügt werden, "
+"indem sie in <literal>APT::FTPArchive::Release::Patterns</literal> "
+"aufgeführt werden. Dann schreibt er eine <filename>Release</filename>-Datei "
+"auf die Standardausgabe, die für jede Datei eine MD5-, SHA1- und SHA256-"
+"Prüfsumme enthält."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Values for the additional metadata fields in the Release file are taken from "
+"the corresponding variables under <literal>APT::FTPArchive::Release</"
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
+"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
+"<literal>Architectures</literal>, <literal>Components</literal>, "
+"<literal>Description</literal>."
+msgstr ""
+"Werte für zusätzliche Metadatenfelder in der Release-Datei werden den "
+"entsprechenden Variablen unter <literal>APT::FTPArchive::Release</literal> "
+"entnommen, z.B. <literal>APT::FTPArchive::Release::Origin</literal>. Die "
+"unterstützten Felder sind: <literal>Origin</literal>, <literal>Label</"
+"literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+"<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-Until</"
+"literal>, <literal>Architectures</literal>, <literal>Components</literal>, "
+"<literal>Description</literal>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command is designed to be runnable from a "
+"cron script and builds indexes according to the given config file. The "
+"config language provides a flexible means of specifying which index files "
+"are built from which directories, as well as providing a simple means of "
+"maintaining the required settings."
+msgstr ""
+"Der <literal>generate</literal>-Befehl wurde entworfen, um von einem Cron-"
+"Skript ausführbar zu sein und bildet Indizes, die der angegebenen "
+"Konfigurationsdatei entsprechen. Die Konfigurationssprache stellt eine "
+"flexible Möglichkeit bereit, um anzugeben, welche Indexdateien von welchen "
+"Verzeichnissen gebildet wurden, ebenso wie sie eine einfache Möglichkeit zur "
+"Verwaltung der erforderlichen Einstellungen bereitstellt."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>clean</literal> command tidies the databases used by the given "
+"configuration file by removing any records that are no longer necessary."
+msgstr ""
+"Der <literal>clean</literal>-Befehl räumt die Datenbanken auf, die von der "
+"angegebenen Konfigurationsdatei benutzt wurden, indem es nicht länger nötige "
+"Datensätze entfernt."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-ftparchive.1.xml
+msgid "The Generate Configuration"
+msgstr "Die Generate-Konfiguration"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command uses a configuration file to "
+"describe the archives that are going to be generated. It follows the typical "
+"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-"
+"conf; contains a description of the syntax. Note that the generate "
+"configuration is parsed in sectional manner, but &apt-conf; is parsed in a "
+"tree manner. This only effects how the scope tag is handled."
+msgstr ""
+"Der <literal>generate</literal>-Befehl benutzt eine Konfigurationsdatei, um "
+"die Archive zu beschreiben, die generiert werden sollen. Es folgt dem "
+"typischen ISC-Konfigurationsformat, wie es in ISC-Werkzeugen wie Bind 8 oder "
+"DHCP gesehen werden kann. &apt-conf; enthält eine Beschreibung der Syntax. "
+"Beachten Sie, dass die generate-Konfiguration abschnittsweise ausgewertet "
+"wird, &apt-conf; aber baumartig ausgewertet wird. Dies hat nur Auswirkungen, "
+"wenn die Markierung »scope« behandelt wird."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The generate configuration has four separate sections, each described below."
+msgstr ""
+"Die generate-Konfiguration hat vier getrennte Abschnitte, jeder ist "
+"unterhalb beschrieben"
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Dir</literal> Section"
+msgstr "<literal>Dir</literal>-Abschnitt"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Dir</literal> section defines the standard directories needed "
+"to locate the files required during the generation process. These "
+"directories are prepended certain relative paths defined in later sections "
+"to produce a complete an absolute path."
+msgstr ""
+"Der <literal>Dir</literal>-Abschnitt definiert die Vorgabeverzeichnisse, die "
+"zum Orten der benötigten Dateien während des Generierungsprozesses gebraucht "
+"werden. Diese Verzeichnisse werden bestimmten relativen Pfaden, die in "
+"späteren Abschnitten definiert werden, vorangestellt, um einen vollständigen "
+"absoluten Pfad zu bilden."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the root of the FTP archive, in a standard Debian configuration "
+"this is the directory that contains the <filename>ls-LR</filename> and dist "
+"nodes."
+msgstr ""
+"gibt die Wurzel des FTP-Archivs an. In einer Debian-Standardkonfiguration "
+"ist das das Verzeichnis, das die <filename>ls-LR</filename>- und dist-Knoten "
+"enthält."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the override files."
+msgstr "gibt den Ort der Override-Dateien an"
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the cache files."
+msgstr "gibt den Ort der Zwischenspeicherdateien an"
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the location of the file list files, if the <literal>FileList</"
+"literal> setting is used below."
+msgstr ""
+"gibt den Ort der Dateilistendateien an, wenn die <literal>FileList</literal> "
+"unterhalb gesetzt ist."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Default</literal> Section"
+msgstr "<literal>Default</literal>-Abschnitt"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Default</literal> section specifies default values, and "
+"settings that control the operation of the generator. Other sections may "
+"override these defaults with a per-section setting."
+msgstr ""
+"Der <literal>Default</literal>-Abschnitt gibt Vorgabewerte an und "
+"Einstellungen, die den Betrieb des Generators steuern. Andere Abschnitte "
+"können diese Vorgaben mit einer Einstellung pro Abschnitt überschreiben."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the default compression schemes to use for the package index files. It "
+"is a string that contains a space separated list of at least one of: '.' (no "
+"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
+"'. gzip'."
+msgstr ""
+"setzt das Vorgabe-Kompressionsschema, das für die Package-Indexdateien "
+"benutzt wird. Es ist eine Zeichenkette, die eine durch Leerzeichen getrennte "
+"Liste mit mindestens einem der folgenden Dinge enthält: ».« (keine "
+"Kompression), »gzip« und »bzip2«. Die Vorgabe für alle Kompressionsschemata "
+"ist ». gzip«."
projects / apt.git / blobdiff