msgstr ""
"Project-Id-Version: apt-doc 1.0.7\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2015-10-20 19:29+0200\n"
+"POT-Creation-Date: 2015-10-22 16:34+0200\n"
"PO-Revision-Date: 2014-08-29 00:34+0100\n"
"Last-Translator: Américo Monteiro <a_monteiro@gmx.com>\n"
"Language-Team: Portuguese <traduz@debianpt.org>\n"
#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"<command>apt</command> (Advanced Package Tool) is the command-line tool for "
-"handling packages. It provides a commandline interface for the package "
-"management of the system. See also &apt-get; and &apt-cache; for more low-"
-"level command options."
+"<command>apt</command> provides a high-level commandline interface for the "
+"package management system. It is intended as an end user interface and "
+"enables some options better suited for interactive usage by default compared "
+"to more specialized APT tools like &apt-get; and &apt-cache;."
msgstr ""
-"<command>apt</command> (Advanced Package Tool) é uma ferramenta de linha de "
-"comandos para manuseamento de pacotes. Disponibiliza uma interface de linha "
-"de comandos para a gestão de pacotes do sistema. Veja também &apt-get; e "
-"&apt-cache; para mais opções de baixo nível dos comandos."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"<literal>list</literal> is used to display a list of packages. It supports "
-"shell pattern for matching package names and the following options: "
-"<option>--installed</option>, <option>--upgradable</option>, <option>--"
-"upgradeable</option>, <option>--all-versions</option> are supported."
+"Much like <command>apt</command> itself, its manpage is intended as an end "
+"user interface and as such only mentions the most used commands and options "
+"partly to not duplicate information in multiple places and partly to avoid "
+"overwelming readers with a cornucopia of options and details."
msgstr ""
-"<literal>list</literal> é usado para mostrar uma lista de pacotes. Suporta "
-"padrões da shell para corresponder aos nomes de pacotes e são suportadas as "
-"seguintes opções <option>--installed</option>, <option>--upgradable</"
-"option>, <option>--all-versions</option>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+#| msgid "apt-get"
+msgid "(&apt-get;)"
+msgstr "apt-get"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>search</literal> searches for the given term(s) and display "
-"matching packages."
+"<option>update</option> is used to download package information from all "
+"configured sources. Other commands operate on this data to e.g. perform "
+"package upgrades or search in and display details about all packages "
+"available for installation."
msgstr ""
-"<literal>search</literal> procura por termo(s) determinado(s) e mostra os "
-"pacotes correspondentes."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>upgrade</literal> is used to install the newest versions of all "
+#| "packages currently installed on the system from the sources enumerated in "
+#| "<filename>/etc/apt/sources.list</filename>. New packages will be "
+#| "installed, but existing packages will never be removed."
+msgid ""
+"<option>upgrade</option> is used to install available upgrades of all "
+"packages currently installed on the system from the sources configured via "
+"&sources-list;. New packages will be installed if required to statisfy "
+"dependencies, but existing packages will never be removed. If an upgrade for "
+"a package requires the remove of an installed package the upgrade for this "
+"package isn't performed."
+msgstr ""
+"<literal>upgrade</literal> é usado para instalar as versões mais recentes de "
+"todos os pacotes actualmente instalados no sistema a partir das fontes "
+"enumeradas em <filename>/etc/apt/sources.list</filename>. Serão instalados "
+"novos pacotes, mas pacotes existentes nunca serão removidos."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>full-upgrade</literal> performs the function of upgrade but may "
+#| "also remove installed packages if that is required in order to resolve a "
+#| "package conflict."
msgid ""
-"<literal>show</literal> shows the package information for the given "
-"package(s)."
+"<literal>full-upgrade</literal> performs the function of upgrade but will "
+"remove currently installed packages if this is needed to upgrade the system "
+"as a whole."
+msgstr ""
+"<literal>full-upgrade</literal> executa a função de upgrade mas pode também "
+"remover pacotes instalados se tal for necessário de modo a resolver um "
+"conflito de pacotes."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid ","
msgstr ""
-"<literal>show</literal> mostra a informação do pacote para o(s) pacote(s) "
-"determinado(s)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>install</literal> is followed by one or more package names desired "
-"for installation or upgrading."
+"Performs the requested action on one or more packages specified via ®ex;, "
+"&glob; or exact match. The requested action can be overidden for specific "
+"packages by append a plus (+) to the package name to install this package or "
+"a minus (-) to remove it."
msgstr ""
-"<literal>install</literal> é seguido por um ou mais nomes de pacotes que se "
-"deseja instalar ou actualizar."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "A specific version of a package can be selected for installation by "
+#| "following the package name with an equals and the version of the package "
+#| "to select. This will cause that version to be located and selected for "
+#| "install. Alternatively a specific distribution can be selected by "
+#| "following the package name with a slash and the version of the "
+#| "distribution or the Archive name (stable, testing, unstable)."
msgid ""
"A specific version of a package can be selected for installation by "
-"following the package name with an equals and the version of the package to "
-"select. This will cause that version to be located and selected for install. "
-"Alternatively a specific distribution can be selected by following the "
-"package name with a slash and the version of the distribution or the Archive "
-"name (stable, testing, unstable)."
+"following the package name with an equals (=) and the version of the package "
+"to select. Alternatively the version from a specific release can be selected "
+"by following the package name with a forward slash (/) and codename (&stable-"
+"codename;, &testing-codename;, sid …) or suite name (stable, testing, "
+"unstable). This will also select versions from this release for dependencies "
+"of this package if needed to satisfy the request."
msgstr ""
"Pode ser seleccionada para instalação uma versão específica de um pacote ao "
"continuar o nome do pacote com um igual (=) e a versão do pacote a "
"versão da distribuição ou o nome de Arquivo (stable, testing, unstable)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
msgid ""
-"<literal>remove</literal> is identical to <literal>install</literal> except "
-"that packages are removed instead of installed. Note that removing a package "
-"leaves its configuration files on the system. If a plus sign is appended to "
-"the package name (with no intervening space), the identified package will be "
-"installed instead of removed."
-msgstr ""
-"<literal>remove</literal> é idêntico a <literal>install</literal> à "
-"excepção que os pacotes são removidos em vez de instalados. Note que remover "
-"um pacote deixa os seus ficheiros de configuração no sistema. Se um sinal "
-"mais (+) for acrescentado ao nome do pacote (sem nenhum espaço a separar), o "
-"pacote identificado será instalado em vez de removido."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "(and the"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml apt-get.8.xml
-msgid "alias since 1.1)"
+"Removing a package removes all packaged data, but leaves usually small "
+"(modified) user configuration files behind, in case the remove was an "
+"accident. Just issuing an installtion request for the accidently removed "
+"package will restore it funcation as before in that case. On the other hand "
+"you can get right of these leftovers via calling <command>purge</command> "
+"even on already removed packages. Note that this does not effect any data "
+"or configuration stored in your home directory."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml apt-get.8.xml
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>autoremove</literal> is used to remove packages that were "
+#| "automatically installed to satisfy dependencies for other packages and "
+#| "are now no longer needed."
msgid ""
"<literal>autoremove</literal> is used to remove packages that were "
"automatically installed to satisfy dependencies for other packages and are "
-"now no longer needed."
+"now no longer needed as dependencies changed or the package(s) needing them "
+"were removed in the meantime."
msgstr ""
"<literal>autoremove</literal> é usado para remover pacotes que foram "
"instalados automaticamente para satisfazer dependências de outros pacotes e "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>edit-sources</literal> lets you edit your sources.list file and "
-"provides basic sanity checks."
+"Try to ensure that the list does not include applications you have grown to "
+"like even through they there once installed just as a dependency of another "
+"package. You can mark such a package as manually installed by using &apt-"
+"mark;. Packages which you have installed explicitly via <command>install</"
+"command> are never proposed for automatic removal as well."
msgstr ""
-"<literal>edit-sources</literal> permite-lhe editar o seu ficheiro sources."
-"list e disponibiliza verificações de sanidade básicas."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+#| msgid "&apt-conf;"
+msgid "(&apt-cache;)"
+msgstr "&apt-conf;"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>update</literal> is used to resynchronize the package index files "
-"from their sources."
+"<option>search</option> can be used to search for the given ®ex; term(s) "
+"in the list of the available packages and display matches. This can e.g. be "
+"useful if you are looking for packages having a specific feature. If you "
+"are looking for a package including a specific file try &apt-file;."
msgstr ""
-"<literal>update</literal> é usado para re-sincronizar o índice dos pacotes a "
-"partir das suas fontes."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
msgid ""
-"<literal>upgrade</literal> is used to install the newest versions of all "
-"packages currently installed on the system from the sources enumerated in "
-"<filename>/etc/apt/sources.list</filename>. New packages will be installed, "
-"but existing packages will never be removed."
+"Show information about the given package(s) including its dependencies, "
+"installation and download size, sources the package is available from, the "
+"description of the packages content and many more. It can e.g. be helpful to "
+"look at this information before allowing &apt; to remove a package or while "
+"searching for new packages to install."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid "(work-in-progress)"
msgstr ""
-"<literal>upgrade</literal> é usado para instalar as versões mais recentes de "
-"todos os pacotes actualmente instalados no sistema a partir das fontes "
-"enumeradas em <filename>/etc/apt/sources.list</filename>. Serão instalados "
-"novos pacotes, mas pacotes existentes nunca serão removidos."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.8.xml
-msgid ""
-"<literal>full-upgrade</literal> performs the function of upgrade but may "
-"also remove installed packages if that is required in order to resolve a "
-"package conflict."
+#, fuzzy
+#| msgid ""
+#| "<literal>list</literal> is used to display a list of packages. It "
+#| "supports shell pattern for matching package names and the following "
+#| "options: <option>--installed</option>, <option>--upgradable</option>, "
+#| "<option>--upgradeable</option>, <option>--all-versions</option> are "
+#| "supported."
+msgid ""
+"<option>list</option> is somewhat similar to <command>dpkg-query --list</"
+"command> in that it can display a list of packages satisfying certain "
+"criteria. It supports &glob; patterns for matching package names as well as "
+"options to list installed (<option>--installed</option>), upgradeable "
+"(<option>--upgradeable</option>) or all available (<option>--all-versions</"
+"option>) versions."
msgstr ""
-"<literal>full-upgrade</literal> executa a função de upgrade mas pode também "
-"remover pacotes instalados se tal for necessário de modo a resolver um "
-"conflito de pacotes."
+"<literal>list</literal> é usado para mostrar uma lista de pacotes. Suporta "
+"padrões da shell para corresponder aos nomes de pacotes e são suportadas as "
+"seguintes opções <option>--installed</option>, <option>--upgradable</"
+"option>, <option>--all-versions</option>."
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-mark.8.xml apt-config.8.xml
-#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
-msgid "options"
-msgstr "opções"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>edit-sources</literal> lets you edit your sources.list file and "
+#| "provides basic sanity checks."
+msgid ""
+"<literal>edit-sources</literal> lets you edit your &sources-list; files in "
+"your preferred texteditor while also providing basic sanity checks."
+msgstr ""
+"<literal>edit-sources</literal> permite-lhe editar o seu ficheiro sources."
+"list e disponibiliza verificações de sanidade básicas."
#. type: Content of: <refentry><refsect1><title>
#: apt.8.xml
-msgid "Script usage"
-msgstr "Utilização de script"
+msgid "Script usage and Differences to other APT tools"
+msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
+#, fuzzy
+#| msgid ""
+#| "The &apt; commandline is designed as a end-user tool and it may change "
+#| "the output between versions. While it tries to not break backward "
+#| "compatibility there is no guarantee for it either. All features of &apt; "
+#| "are available in &apt-cache; and &apt-get; via APT options. Please prefer "
+#| "using these commands in your scripts."
msgid ""
-"The &apt; commandline is designed as a end-user tool and it may change the "
-"output between versions. While it tries to not break backward compatibility "
-"there is no guarantee for it either. All features of &apt; are available in "
-"&apt-cache; and &apt-get; via APT options. Please prefer using these "
-"commands in your scripts."
+"The &apt; commandline is designed as a end-user tool and it may change "
+"behaviour between versions. While it tries to not break backward "
+"compatibility there is no guarantee for it either if it seems benefitial for "
+"interactive use."
msgstr ""
"A linha de comandos do &apt; foi desenhada como ferramenta de utilizador "
"final e pode variar os textos mostrados entre versões. Apesar de tentar não "
"get; via opções do APT. Por favor dê preferência a usar estes comandos nos "
"seus scripts."
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml
-msgid "Differences to &apt-get;"
-msgstr "Diferenças para o &apt-get;"
-
#. type: Content of: <refentry><refsect1><para>
#: apt.8.xml
msgid ""
-"The <command>apt</command> command is meant to be pleasant for end users and "
-"does not need to be backward compatible like &apt-get;. Therefore some "
-"options are different:"
-msgstr ""
-"O comando <command>apt</command> destina-se a ser agradável para os "
-"utilizadores finais e não precisa de ser compatível com as versões "
-"anteriores como o &apt-get;. Por isso algumas opções são diferentes."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
-msgstr "A opção <literal>DPkg::Progress-Fancy</literal> está activada."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid "The option <literal>APT::Color</literal> is enabled."
-msgstr "A opção <literal>APT::Color</literal> está activada."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid ""
-"A new <literal>list</literal> command is available similar to <literal>dpkg "
-"--list</literal>."
-msgstr ""
-"Está disponível um novo comando <literal>list</literal> de modo semelhante a "
-"<literal>dpkg --list</literal>."
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml
-msgid ""
-"The option <literal>upgrade</literal> has <literal>--with-new-pkgs</literal> "
-"enabled by default."
+"All features of &apt; are available in dedicated APT tools like &apt-get; "
+"and &apt-cache; as well. &apt; just changes the default value of some "
+"options (see &apt-conf; and specifically the Binary scope). So prefer using "
+"these commands (potentially with some additional options enabled) in your "
+"scripts as they keep backward compatibility as much as possible."
msgstr ""
-"A opção <literal>upgrade</literal> tem <literal>--with-new-pkgs</literal> "
-"activado por predefinição."
#. type: Content of: <refentry><refsect1><title>
#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
"funcionalidades podem ser usadas para sobrepor decisões feitas pelo sistema "
"de resolução de conflitos do apt-get."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"A specific version of a package can be selected for installation by "
+"following the package name with an equals and the version of the package to "
+"select. This will cause that version to be located and selected for install. "
+"Alternatively a specific distribution can be selected by following the "
+"package name with a slash and the version of the distribution or the Archive "
+"name (stable, testing, unstable)."
+msgstr ""
+"Pode ser seleccionada para instalação uma versão específica de um pacote ao "
+"continuar o nome do pacote com um igual (=) e a versão do pacote a "
+"seleccionar. Isto irá fazer com que essa versão seja localizada e "
+"seleccionada para instalação. Alternativamente pode ser seleccionada uma "
+"distribuição específica ao continuar o nome do pacote com uma slash (/) e a "
+"versão da distribuição ou o nome de Arquivo (stable, testing, unstable)."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"lo' e 'lowest'. Se isto for indesejável, ancore a expressão regular com a "
"caractere '^' ou '$', para criar uma expressão regular mais específica."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"<literal>remove</literal> is identical to <literal>install</literal> except "
+"that packages are removed instead of installed. Note that removing a package "
+"leaves its configuration files on the system. If a plus sign is appended to "
+"the package name (with no intervening space), the identified package will be "
+"installed instead of removed."
+msgstr ""
+"<literal>remove</literal> é idêntico a <literal>install</literal> à "
+"excepção que os pacotes são removidos em vez de instalados. Note que remover "
+"um pacote deixa os seus ficheiros de configuração no sistema. Se um sinal "
+"mais (+) for acrescentado ao nome do pacote (sem nenhum espaço a separar), o "
+"pacote identificado será instalado em vez de removido."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"obtidos. Remove tudo excepto o ficheiro lock de <filename>&cachedir;/"
"archives/</filename> e <filename>&cachedir;/archives/partial/</filename>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "(and the"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "alias since 1.1)"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"configuração <literal>APT::Clean-Installed</literal> irá prevenir que "
"pacotes instalados sejam apagados se estiver definida para 'off'."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"<literal>autoremove</literal> is used to remove packages that were "
+"automatically installed to satisfy dependencies for other packages and are "
+"now no longer needed."
+msgstr ""
+"<literal>autoremove</literal> é usado para remover pacotes que foram "
+"instalados automaticamente para satisfazer dependências de outros pacotes e "
+"que já não são necessários."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
#, fuzzy
"<literal><filename>doc/acquire-additional-files.txt</filename></literal>."
msgstr ""
+#. type: Content of: <refentry><refsect1><title>
+#: apt-get.8.xml apt-cache.8.xml apt-config.8.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "options"
+msgstr "opções"
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
msgid ""
"partir do nome de ficheiro dado com o parâmetro &synopsis-param-filename; ou "
"se o nome do ficheiro for <literal>-</literal> a partir da entrada standard."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"It is critical that keys added manually via <command>apt-key</command> are "
+"verified to belong to the owner of the repositories they claim to be for "
+"otherwise the &apt-secure; infrastructure is completely undermined."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid "Remove a key from the list of trusted keys."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
-"Pass advanced options to gpg. With adv --recv-key you can download the "
-"public key."
+"Pass advanced options to gpg. With <command>adv --recv-key</command> you can "
+"e.g. download key from keyservers directly into the the trusted set of keys. "
+"Note that there are <emphasis>no</emphasis> checks performed, so it is easy "
+"to completely undermine the &apt-secure; infrastructure if used without care."
msgstr ""
-"Passa opções avançadas ao gpg. Com adv --recv-key você pode descarregar a "
-"chave pública."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
"lo."
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml apt-cdrom.8.xml
+#: apt-key.8.xml apt-mark.8.xml apt-cdrom.8.xml
msgid "Options"
msgstr "Opções"
#. type: Content of: <refentry><refnamediv><refpurpose>
#: apt-mark.8.xml
-msgid "mark/unmark a package as being automatically-installed"
-msgstr "marca/desmarca um pacote como sendo instalado automaticamente"
+msgid "show, set and unset various settings for a package"
+msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
msgid ""
-"<command>apt-mark</command> will change whether a package has been marked as "
-"being automatically installed."
+"<command>apt-mark</command> can be used as a unified frontend to set various "
+"settings for a package like marking a package as being automatically/"
+"manually installed or changing <command>dpkg</command> selections such as "
+"hold, install, deinstall and purge which are respected e.g. by <command>apt-"
+"get dselect-upgrade</command> or <command>aptitude</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Automatically and manually installed packages"
msgstr ""
-"<command>apt-mark</command> irá modificar se um pacote foi marcado como "
-"sendo instalado automaticamente."
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "When you request that a package is installed, and as a result other "
+#| "packages are installed to satisfy its dependencies, the dependencies are "
+#| "marked as being automatically installed. Once these automatically "
+#| "installed packages are no longer depended on by any manually installed "
+#| "packages, they will be removed by e.g. <command>apt-get</command> or "
+#| "<command>aptitude</command>."
msgid ""
"When you request that a package is installed, and as a result other packages "
"are installed to satisfy its dependencies, the dependencies are marked as "
-"being automatically installed. Once these automatically installed packages "
-"are no longer depended on by any manually installed packages, they will be "
-"removed by e.g. <command>apt-get</command> or <command>aptitude</command>."
+"being automatically installed, while package you installed explicitely is "
+"marked as manually installed. Once a automatically installed package is no "
+"longer depended on by any manually installed package it is considered no "
+"longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
+"command> will at least suggest removing them."
msgstr ""
"Quando você pede que um pacote seja instalado, e como resultado outros "
"pacotes são instalados para satisfazer as suas dependências, as dependências "
"manualmente, o que irá prevenir que o pacote seja removido automaticamente "
"se nenhum outro pacote depender dele."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
-"<literal>hold</literal> is used to mark a package as held back, which will "
-"prevent the package from being automatically installed, upgraded or "
-"removed. The command is only a wrapper around <command>dpkg --set-"
-"selections</command> and the state is therefore maintained by &dpkg; and not "
-"affected by the <option>--file</option> option."
-msgstr ""
-"<literal>hold</literal> é usado para marcar um pacote como retido, o que vai "
-"prevenir que o pacote seja automaticamente instalado, actualizado ou "
-"removido. O comando é apenas um invólucro em redor de <command>dpkg --set-"
-"selections</command> e o estado é assim mantido pelo &dpkg; e não é afectado "
-"pela opção <option>--file</option>."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml
-msgid ""
-"<literal>unhold</literal> is used to cancel a previously set hold on a "
-"package to allow all actions again."
-msgstr ""
-"<literal>unhold</literal> é usado para cancelar um \"hold\" previamente "
-"definido num pacote para permitir de novo todas as acções."
-
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-mark.8.xml
msgid ""
"<literal>showauto</literal>, excepto que irá escrever uma lista dos pacotes "
"instalados manualmente."
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"Read/Write package stats from the filename given with the parameter "
+"&synopsis-param-filename; instead of from the default location, which is "
+"<filename>extended_status</filename> in the directory defined by the "
+"Configuration Item: <literal>Dir::State</literal>."
+msgstr ""
+"Lê/Escreve o estado de pacote a partir do nome de ficheiro dado com o "
+"parâmetro &synopsis-param-filename; em vez de o fazer a partir da "
+"localização predefinida, a qual é <filename>extended_status</filename> no "
+"directório definido pelo Item de Configuração: <literal>Dir::State</literal>."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Prevent changes for a package"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>manual</literal> is used to mark a package as being manually "
+#| "installed, which will prevent the package from being automatically "
+#| "removed if no other packages depend on it."
+msgid ""
+"<literal>hold</literal> is used to mark a package as held back, which will "
+"prevent the package from being automatically installed, upgraded or removed."
+msgstr ""
+"<literal>manual</literal> é usado para marcar um pacote como sendo instalado "
+"manualmente, o que irá prevenir que o pacote seja removido automaticamente "
+"se nenhum outro pacote depender dele."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"<literal>unhold</literal> is used to cancel a previously set hold on a "
+"package to allow all actions again."
+msgstr ""
+"<literal>unhold</literal> é usado para cancelar um \"hold\" previamente "
+"definido num pacote para permitir de novo todas as acções."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-mark.8.xml
msgid ""
"<literal>showhold</literal> é usado para escrever uma lista dos pacotes em "
"retenção do mesmo modo que os outros comandos show."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Shedule packages for install, remove and purge"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
msgid ""
-"Read/Write package stats from the filename given with the parameter "
-"&synopsis-param-filename; instead of from the default location, which is "
-"<filename>extended_status</filename> in the directory defined by the "
-"Configuration Item: <literal>Dir::State</literal>."
+"Some frontends like <command>apt-get dselect-upgrade</command> can be used "
+"to apply previously sheduled changes to the install state of packages. Such "
+"changes can be sheduled with the <option>install</option>, <option>remove</"
+"option> (also known as <option>deinstall</option>) and <option>purge</"
+"option> commands. Packages with a specific selection can be displayed with "
+"<option>showinstall</option>, <option>showremove</option> and "
+"<option>showpurge</option> respectively. More information about these so "
+"called dpkg selections can be found in &dpkg;."
msgstr ""
-"Lê/Escreve o estado de pacote a partir do nome de ficheiro dado com o "
-"parâmetro &synopsis-param-filename; em vez de o fazer a partir da "
-"localização predefinida, a qual é <filename>extended_status</filename> no "
-"directório definido pelo Item de Configuração: <literal>Dir::State</literal>."
#. type: Content of: <refentry><refsect1><para>
#: apt-mark.8.xml
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "Starting with version 0.6, <command>apt</command> contains code that does "
+#| "signature checking of the Release file for all archives. This ensures "
+#| "that packages in the archive can't be modified by people who have no "
+#| "access to the Release file signing key."
msgid ""
-"Starting with version 0.6, <command>apt</command> contains code that does "
-"signature checking of the Release file for all archives. This ensures that "
-"packages in the archive can't be modified by people who have no access to "
-"the Release file signing key."
+"Starting with version 0.6, <command>APT</command> contains code that does "
+"signature checking of the Release file for all repositories. This ensures "
+"that data like packages in the archive can't be modified by people who have "
+"no access to the Release file signing key."
msgstr ""
"A partir da versão 0.6, o <command>apt</command> contém código que faz "
"verificação de assinaturas do ficheiro Release para todos os arquivos. Isto "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
-"If a package comes from a archive without a signature, or with a signature "
-"that apt does not have a key for, that package is considered untrusted, and "
-"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives; future releases might force all "
-"sources to be verified before downloading packages from them."
+"If an archive doesn't have a signed Release file or no Release file at all "
+"current APT versions will raise a warning in <command>update</command> "
+"operations and frontends like <command>apt-get</command> will require "
+"explicit confirmation if an installation request includes a package from "
+"such an unauthenticated archive."
msgstr ""
-"Se um pacote vem dum arquivo sem assinatura ou com uma assinatura para a "
-"qual o apt não tem a chave, esse pacote é considerado 'não sendo de "
-"confiança' e instalá-lo irá resultar num grande aviso. Actualmente o "
-"<command>apt-get</command> irá avisar apenas de arquivos não assinados, "
-"lançamentos futuros poderão vir a forçar que todas as fontes sejam "
-"verificadas antes de descarregar pacotes delas."
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
-"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
-"authentication feature."
+"In the future APT will refuse to work with unauthenticated repositories by "
+"default until support for them is removed entirely. Users have the option to "
+"opt-in to this behavior already by setting the configuration option "
+"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</"
+"literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "The package frontends &apt-get;, &aptitude; and &synaptic; support this "
+#| "new authentication feature."
+msgid ""
+"Note: All APT-based package management frontends like &apt-get;, &aptitude; "
+"and &synaptic; support this authentication feature, so this manpage uses "
+"<literal>APT</literal> to refer to them all for simplicity only."
msgstr ""
"Os frontends de pacotes &apt-get;, &aptitude; e &synaptic; suportam esta "
"nova funcionalidade de autenticação."
#. type: Content of: <refentry><refsect1><title>
#: apt-secure.8.xml
-msgid "Trusted archives"
+#, fuzzy
+#| msgid "Trusted archives"
+msgid "Trusted repositories"
msgstr "Arquivos de confiança"
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
-msgid ""
-"The chain of trust from an apt archive to the end user is made up of several "
+#, fuzzy
+#| msgid ""
+#| "The chain of trust from an apt archive to the end user is made up of "
+#| "several steps. <command>apt-secure</command> is the last step in this "
+#| "chain; trusting an archive does not mean that you trust its packages not "
+#| "to contain malicious code, but means that you trust the archive "
+#| "maintainer. It's the archive maintainer's responsibility to ensure that "
+#| "the archive's integrity is preserved."
+msgid ""
+"The chain of trust from an APT archive to the end user is made up of several "
"steps. <command>apt-secure</command> is the last step in this chain; "
"trusting an archive does not mean that you trust its packages not to contain "
"malicious code, but means that you trust the archive maintainer. It's the "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
-msgid ""
-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. In order to become "
-"effective, this upload needs to be signed by a key contained in the Debian "
-"Maintainers keyring (available in the debian-keyring package). Maintainers' "
-"keys are signed by other maintainers following pre-established procedures to "
-"ensure the identity of the key holder."
+#, fuzzy
+#| msgid ""
+#| "The chain of trust in Debian starts when a maintainer uploads a new "
+#| "package or a new version of a package to the Debian archive. In order to "
+#| "become effective, this upload needs to be signed by a key contained in "
+#| "the Debian Maintainers keyring (available in the debian-keyring package). "
+#| "Maintainers' keys are signed by other maintainers following pre-"
+#| "established procedures to ensure the identity of the key holder."
+msgid ""
+"The chain of trust in Debian e.g. starts when a maintainer uploads a new "
+"package or a new version of a package to the Debian archive. In order to "
+"become effective, this upload needs to be signed by a key contained in one "
+"of the Debian package maintainers keyrings (available in the debian-keyring "
+"package). Maintainers' keys are signed by other maintainers following pre-"
+"established procedures to ensure the identity of the key holder. Similar "
+"procedures exist in all Debian-based distributions."
msgstr ""
"A corrente de confiança em Debian começa quando o responsável faz o upload "
"de um novo pacote ou de uma nova versão de um pacote para o arquivo Debian. "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "However, it does not defend against a compromise of the Debian master "
+#| "server itself (which signs the packages) or against a compromise of the "
+#| "key used to sign the Release files. In any case, this mechanism can "
+#| "complement a per-package signature."
msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
+"However, it does not defend against a compromise of the master server itself "
+"(which signs the packages) or against a compromise of the key used to sign "
+"the Release files. In any case, this mechanism can complement a per-package "
+"signature."
msgstr ""
"No entanto, isto não defende contra um compromisso do próprio servidor "
"mestre da Debian (o qual assina os pacotes) ou contra um compromisso da "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<command>apt-key</command> is the program that manages the list of keys "
+#| "used by apt. It can be used to add or remove keys, although an "
+#| "installation of this release will automatically contain the default "
+#| "Debian archive signing keys used in the Debian package repositories."
msgid ""
"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys, although an installation of "
-"this release will automatically contain the default Debian archive signing "
-"keys used in the Debian package repositories."
+"by APT to trust repositories. It can be used to add or remove keys as well "
+"as list the trusted keys. Limiting which key(s) are able to sign which "
+"archive is possible via the <option>Signed-By</option> in &sources-list;."
msgstr ""
"<command>apt-key</command> é o programa que gere a lista de chaves usada "
"pelo apt. Pode ser usado para adicionar ou remover chaves apesar de uma "
"assinaturas predefinidas de arquivo Debian usadas nos repositórios de "
"pacotes Debian."
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"Note that a default installation already contains all keys to securily "
+"acquire packages from the default repositories, so fiddling with "
+"<command>apt-key</command> is only needed if third-party repositories are "
+"added."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "<emphasis>Publish the key fingerprint</emphasis>, that way your users "
+#| "will know what key they need to import in order to authenticate the files "
+#| "in the archive."
msgid ""
"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
"know what key they need to import in order to authenticate the files in the "
-"archive."
+"archive. It is best to ship your key in its own keyring package like "
+"&keyring-distro; does with &keyring-package; to be able to distribute "
+"updates and key transitions automatically later."
msgstr ""
"<emphasis>Publicar a impressão digital da chave</emphasis>, deste modo os "
"seus utilizadores irão saber que chave precisam de importar de modo a "
"autenticar os ficheiros no arquivo."
+#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
+#: apt-secure.8.xml
+msgid ""
+"<emphasis>Provide instructions on how to add your archive and key</"
+"emphasis>. If your users can't acquire your key securily the chain of trust "
+"described above is broken. How you can help users add your key depends on "
+"your archive and target audience ranging from having your keyring package "
+"included in another archive users already have configured (like the default "
+"repositories of their distribution) to leverage the web of trust."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "For more background information you might want to review the <ulink url="
+#| "\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+#| "Security Infrastructure</ulink> chapter of the Securing Debian Manual "
+#| "(available also in the harden-doc package) and the <ulink url=\"http://"
+#| "www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution "
+#| "HOWTO</ulink> by V. Alex Brennen."
msgid ""
"For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+"\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
"Security Infrastructure</ulink> chapter of the Securing Debian Manual "
"(available also in the harden-doc package) and the <ulink url=\"http://www."
"cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
"o ficheiro de configuração principal especificado por <literal>Dir::Etc::"
"main</literal>"
+#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"all options set in the binary specific configuration subtree are moved into "
+"the root of the tree."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
#: apt.conf.5.xml
msgid ""
"available in this case."
msgstr ""
+#. type: Content of: <refentry><refsect1><title>
+#: apt.conf.5.xml
+#, fuzzy
+#| msgid "User configuration"
+msgid "Binary specific configuration"
+msgstr "Configuração do utilizador"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Especially with the introduction of the <command>apt</command> binary it can "
+"be useful to set certain options only for a specific binary as even options "
+"which look like they would effect only a certain binary like <option>APT::"
+"Get::Show-Versions</option> effect <command>apt-get</command> as well as "
+"<command>apt</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Setting an option for a specific binary only can be achieved by setting the "
+"option inside the <option>Binary::<replaceable>specific-binary</"
+"replaceable></option> scope. Setting the option <option>APT::Get::Show-"
+"Versions</option> for the <command>apt</command> only can e.g. by done by "
+"setting <option>Binary::apt::APT::Get::Show-Versions</option> instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Note that as seen in the DESCRIPTION section further above you can't set "
+"binary-specific options on the commandline itself nor in configuration files "
+"loaded via the commandline."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
msgid "Directories"
"literal> ou <literal>APT::Update::{Pre,Post}-Invoke</literal>."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml
-#: apt-ftparchive.1.xml
+#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml apt-ftparchive.1.xml
msgid "Examples"
msgstr "Exemplos"
"detect and error out on such anomalies."
msgstr ""
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override this decision either with the "
+"value <literal>yes</literal>, which lets APT consider this source always as "
+"a trusted source even if it has no or fails authentication checks by "
+"disabling parts of &apt-secure; and should therefore only be used in a local "
+"and trusted context (if at all) as otherwise security is breached. The "
+"opposite can be achieved with the value no, which causes the source to be "
+"handled as untrusted even if the authentication checks passed successfully. "
+"The default value can't be set explicitly."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
msgid ""
msgid "Which will use the already fetched archives on the disc."
msgstr "O qual irá usar os arquivos já obtidos e que estão no disco."
+#~ msgid ""
+#~ "<command>apt</command> (Advanced Package Tool) is the command-line tool "
+#~ "for handling packages. It provides a commandline interface for the "
+#~ "package management of the system. See also &apt-get; and &apt-cache; for "
+#~ "more low-level command options."
+#~ msgstr ""
+#~ "<command>apt</command> (Advanced Package Tool) é uma ferramenta de linha "
+#~ "de comandos para manuseamento de pacotes. Disponibiliza uma interface de "
+#~ "linha de comandos para a gestão de pacotes do sistema. Veja também &apt-"
+#~ "get; e &apt-cache; para mais opções de baixo nível dos comandos."
+
+#~ msgid ""
+#~ "<literal>search</literal> searches for the given term(s) and display "
+#~ "matching packages."
+#~ msgstr ""
+#~ "<literal>search</literal> procura por termo(s) determinado(s) e mostra os "
+#~ "pacotes correspondentes."
+
+#~ msgid ""
+#~ "<literal>show</literal> shows the package information for the given "
+#~ "package(s)."
+#~ msgstr ""
+#~ "<literal>show</literal> mostra a informação do pacote para o(s) pacote(s) "
+#~ "determinado(s)."
+
+#~ msgid ""
+#~ "<literal>install</literal> is followed by one or more package names "
+#~ "desired for installation or upgrading."
+#~ msgstr ""
+#~ "<literal>install</literal> é seguido por um ou mais nomes de pacotes que "
+#~ "se deseja instalar ou actualizar."
+
+#~ msgid ""
+#~ "<literal>update</literal> is used to resynchronize the package index "
+#~ "files from their sources."
+#~ msgstr ""
+#~ "<literal>update</literal> é usado para re-sincronizar o índice dos "
+#~ "pacotes a partir das suas fontes."
+
+#~ msgid "Script usage"
+#~ msgstr "Utilização de script"
+
+#~ msgid "Differences to &apt-get;"
+#~ msgstr "Diferenças para o &apt-get;"
+
+#~ msgid ""
+#~ "The <command>apt</command> command is meant to be pleasant for end users "
+#~ "and does not need to be backward compatible like &apt-get;. Therefore "
+#~ "some options are different:"
+#~ msgstr ""
+#~ "O comando <command>apt</command> destina-se a ser agradável para os "
+#~ "utilizadores finais e não precisa de ser compatível com as versões "
+#~ "anteriores como o &apt-get;. Por isso algumas opções são diferentes."
+
+#~ msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
+#~ msgstr "A opção <literal>DPkg::Progress-Fancy</literal> está activada."
+
+#~ msgid "The option <literal>APT::Color</literal> is enabled."
+#~ msgstr "A opção <literal>APT::Color</literal> está activada."
+
+#~ msgid ""
+#~ "A new <literal>list</literal> command is available similar to "
+#~ "<literal>dpkg --list</literal>."
+#~ msgstr ""
+#~ "Está disponível um novo comando <literal>list</literal> de modo "
+#~ "semelhante a <literal>dpkg --list</literal>."
+
+#~ msgid ""
+#~ "The option <literal>upgrade</literal> has <literal>--with-new-pkgs</"
+#~ "literal> enabled by default."
+#~ msgstr ""
+#~ "A opção <literal>upgrade</literal> tem <literal>--with-new-pkgs</literal> "
+#~ "activado por predefinição."
+
+#~ msgid ""
+#~ "Pass advanced options to gpg. With adv --recv-key you can download the "
+#~ "public key."
+#~ msgstr ""
+#~ "Passa opções avançadas ao gpg. Com adv --recv-key você pode descarregar a "
+#~ "chave pública."
+
+#~ msgid "mark/unmark a package as being automatically-installed"
+#~ msgstr "marca/desmarca um pacote como sendo instalado automaticamente"
+
+#~ msgid ""
+#~ "<command>apt-mark</command> will change whether a package has been marked "
+#~ "as being automatically installed."
+#~ msgstr ""
+#~ "<command>apt-mark</command> irá modificar se um pacote foi marcado como "
+#~ "sendo instalado automaticamente."
+
+#~ msgid ""
+#~ "<literal>hold</literal> is used to mark a package as held back, which "
+#~ "will prevent the package from being automatically installed, upgraded or "
+#~ "removed. The command is only a wrapper around <command>dpkg --set-"
+#~ "selections</command> and the state is therefore maintained by &dpkg; and "
+#~ "not affected by the <option>--file</option> option."
+#~ msgstr ""
+#~ "<literal>hold</literal> é usado para marcar um pacote como retido, o que "
+#~ "vai prevenir que o pacote seja automaticamente instalado, actualizado ou "
+#~ "removido. O comando é apenas um invólucro em redor de <command>dpkg --set-"
+#~ "selections</command> e o estado é assim mantido pelo &dpkg; e não é "
+#~ "afectado pela opção <option>--file</option>."
+
+#~ msgid ""
+#~ "If a package comes from a archive without a signature, or with a "
+#~ "signature that apt does not have a key for, that package is considered "
+#~ "untrusted, and installing it will result in a big warning. <command>apt-"
+#~ "get</command> will currently only warn for unsigned archives; future "
+#~ "releases might force all sources to be verified before downloading "
+#~ "packages from them."
+#~ msgstr ""
+#~ "Se um pacote vem dum arquivo sem assinatura ou com uma assinatura para a "
+#~ "qual o apt não tem a chave, esse pacote é considerado 'não sendo de "
+#~ "confiança' e instalá-lo irá resultar num grande aviso. Actualmente o "
+#~ "<command>apt-get</command> irá avisar apenas de arquivos não assinados, "
+#~ "lançamentos futuros poderão vir a forçar que todas as fontes sejam "
+#~ "verificadas antes de descarregar pacotes delas."
+
#~ msgid ""
#~ "No action; perform a simulation of events that would occur but do not "
#~ "actually change the system. Configuration Item: <literal>APT::Get::"
projects / apt.git / blobdiff