##################################################################### */
/*}}}*/
// Includes /*{{{*/
-#ifdef __GNUG__
-#pragma implementation "apt-pkg/strutl.h"
-#endif
-
#include <apt-pkg/strutl.h>
#include <apt-pkg/fileutl.h>
#include <apt-pkg/error.h>
#include <ctype.h>
#include <string.h>
#include <stdio.h>
+#include <algorithm>
#include <unistd.h>
#include <regex.h>
#include <errno.h>
{
iconv_t cd;
const char *inbuf;
- char *inptr, *outbuf, *outptr;
- size_t insize, outsize;
-
+ char *inptr, *outbuf;
+ size_t insize, bufsize;
+ dest->clear();
+
cd = iconv_open(codeset, "UTF-8");
if (cd == (iconv_t)(-1)) {
// Something went wrong
else
perror("iconv_open");
- // Clean the destination string
- *dest = "";
-
return false;
}
- insize = outsize = orig.size();
+ insize = bufsize = orig.size();
inbuf = orig.data();
inptr = (char *)inbuf;
- outbuf = new char[insize+1];
- outptr = outbuf;
+ outbuf = new char[bufsize];
+ size_t lastError = -1;
- iconv(cd, &inptr, &insize, &outptr, &outsize);
- *outptr = '\0';
+ while (insize != 0)
+ {
+ char *outptr = outbuf;
+ size_t outsize = bufsize;
+ size_t const err = iconv(cd, &inptr, &insize, &outptr, &outsize);
+ dest->append(outbuf, outptr - outbuf);
+ if (err == (size_t)(-1))
+ {
+ switch (errno)
+ {
+ case EILSEQ:
+ insize--;
+ inptr++;
+ // replace a series of unknown multibytes with a single "?"
+ if (lastError != insize) {
+ lastError = insize - 1;
+ dest->append("?");
+ }
+ break;
+ case EINVAL:
+ insize = 0;
+ break;
+ case E2BIG:
+ if (outptr == outbuf)
+ {
+ bufsize *= 2;
+ delete[] outbuf;
+ outbuf = new char[bufsize];
+ }
+ break;
+ }
+ }
+ }
- *dest = outbuf;
delete[] outbuf;
iconv_close(cd);
// QuoteString - Convert a string into quoted from /*{{{*/
// ---------------------------------------------------------------------
/* */
-string QuoteString(string Str,const char *Bad)
+string QuoteString(const string &Str, const char *Bad)
{
string Res;
- for (string::iterator I = Str.begin(); I != Str.end(); I++)
+ for (string::const_iterator I = Str.begin(); I != Str.end(); I++)
{
if (strchr(Bad,*I) != 0 || isprint(*I) == 0 ||
*I <= 0x20 || *I >= 0x7F)
// DeQuoteString - Convert a string from quoted from /*{{{*/
// ---------------------------------------------------------------------
/* This undoes QuoteString */
-string DeQuoteString(string Str)
+string DeQuoteString(const string &Str)
{
string Res;
for (string::const_iterator I = Str.begin(); I != Str.end(); I++)
{
if (ASize < 100 && I != 0)
{
- sprintf(S,"%.1f%c",ASize,Ext[I]);
+ sprintf(S,"%'.1f%c",ASize,Ext[I]);
break;
}
if (ASize < 10000)
{
- sprintf(S,"%.0f%c",ASize,Ext[I]);
+ sprintf(S,"%'.0f%c",ASize,Ext[I]);
break;
}
ASize /= 1000.0;
{
if (Sec > 60*60*24)
{
- sprintf(S,"%lid %lih%lim%lis",Sec/60/60/24,(Sec/60/60) % 24,(Sec/60) % 60,Sec % 60);
+ //d means days, h means hours, min means minutes, s means seconds
+ sprintf(S,_("%lid %lih %limin %lis"),Sec/60/60/24,(Sec/60/60) % 24,(Sec/60) % 60,Sec % 60);
break;
}
if (Sec > 60*60)
{
- sprintf(S,"%lih%lim%lis",Sec/60/60,(Sec/60) % 60,Sec % 60);
+ //h means hours, min means minutes, s means seconds
+ sprintf(S,_("%lih %limin %lis"),Sec/60/60,(Sec/60) % 60,Sec % 60);
break;
}
if (Sec > 60)
{
- sprintf(S,"%lim%lis",Sec/60,Sec % 60);
+ //min means minutes, s means seconds
+ sprintf(S,_("%limin %lis"),Sec/60,Sec % 60);
break;
}
-
- sprintf(S,"%lis",Sec);
+
+ //s means seconds
+ sprintf(S,_("%lis"),Sec);
break;
}
// SubstVar - Substitute a string for another string /*{{{*/
// ---------------------------------------------------------------------
/* This replaces all occurances of Subst with Contents in Str. */
-string SubstVar(string Str,string Subst,string Contents)
+string SubstVar(const string &Str,const string &Subst,const string &Contents)
{
string::size_type Pos = 0;
string::size_type OldPos = 0;
return Str;
}
/*}}}*/
+// OutputInDepth - return a string with separator multiplied with depth /*{{{*/
+// ---------------------------------------------------------------------
+/* Returns a string with the supplied separator depth + 1 times in it */
+std::string OutputInDepth(const unsigned long Depth, const char* Separator)
+{
+ std::string output = "";
+ for(unsigned long d=Depth+1; d > 0; d--)
+ output.append(Separator);
+ return output;
+}
+ /*}}}*/
// URItoFileName - Convert the uri into a unique file name /*{{{*/
// ---------------------------------------------------------------------
/* This converts a URI into a safe filename. It quotes all unsafe characters
and converts / to _ and removes the scheme identifier. The resulting
file name should be unique and never occur again for a different file */
-string URItoFileName(string URI)
+string URItoFileName(const string &URI)
{
// Nuke 'sensitive' items
::URI U(URI);
- U.User = string();
- U.Password = string();
- U.Access = "";
+ U.User.clear();
+ U.Password.clear();
+ U.Access.clear();
// "\x00-\x20{}|\\\\^\\[\\]<>\"\x7F-\xFF";
- URI = QuoteString(U,"\\|{}[]<>\"^~=!@#$%^&*");
- string::iterator J = URI.begin();
- for (; J != URI.end(); J++)
- if (*J == '/')
- *J = '_';
- return URI;
+ string NewURI = QuoteString(U,"\\|{}[]<>\"^~_=!@#$%^&*");
+ replace(NewURI.begin(),NewURI.end(),'/','_');
+ return NewURI;
}
/*}}}*/
// Base64Encode - Base64 Encoding routine for short strings /*{{{*/
from wget and then patched and bug fixed.
This spec can be found in rfc2045 */
-string Base64Encode(string S)
+string Base64Encode(const string &S)
{
// Conversion table.
static char tbl[64] = {'A','B','C','D','E','F','G','H',
return Final;
}
/*}}}*/
-// stringcmp - Arbitary string compare /*{{{*/
+// stringcmp - Arbitrary string compare /*{{{*/
// ---------------------------------------------------------------------
-/* This safely compares two non-null terminated strings of arbitary
+/* This safely compares two non-null terminated strings of arbitrary
length */
int stringcmp(const char *A,const char *AEnd,const char *B,const char *BEnd)
{
}
#endif
/*}}}*/
-// stringcasecmp - Arbitary case insensitive string compare /*{{{*/
+// stringcasecmp - Arbitrary case insensitive string compare /*{{{*/
// ---------------------------------------------------------------------
/* */
int stringcasecmp(const char *A,const char *AEnd,const char *B,const char *BEnd)
// ---------------------------------------------------------------------
/* The format is like those used in package files and the method
communication system */
-string LookupTag(string Message,const char *Tag,const char *Default)
+string LookupTag(const string &Message,const char *Tag,const char *Default)
{
// Look for a matching tag.
int Length = strlen(Tag);
- for (string::iterator I = Message.begin(); I + Length < Message.end(); I++)
+ for (string::const_iterator I = Message.begin(); I + Length < Message.end(); I++)
{
// Found the tag
if (I[Length] == ':' && stringcasecmp(I,I+Length,Tag) == 0)
{
// Find the end of line and strip the leading/trailing spaces
- string::iterator J;
+ string::const_iterator J;
I += Length + 1;
for (; isspace(*I) != 0 && I < Message.end(); I++);
for (J = I; *J != '\n' && J < Message.end(); J++);
// ---------------------------------------------------------------------
/* This inspects the string to see if it is true or if it is false and
then returns the result. Several varients on true/false are checked. */
-int StringToBool(string Text,int Default)
+int StringToBool(const string &Text,int Default)
{
char *End;
int Res = strtol(Text.c_str(),&End,0);
// ---------------------------------------------------------------------
/* This pulls full messages from the input FD into the message buffer.
It assumes that messages will not pause during transit so no
- fancy buffering is used. */
+ fancy buffering is used.
+
+ In particular: this reads blocks from the input until it believes
+ that it's run out of input text. Each block is terminated by a
+ double newline ('\n' followed by '\n'). As noted below, there is a
+ bug in this code: it assumes that all the blocks have been read if
+ it doesn't see additional text in the buffer after the last one is
+ parsed, which will cause it to lose blocks if the last block
+ coincides with the end of the buffer.
+ */
bool ReadMessages(int Fd, vector<string> &List)
{
char Buffer[64000];
char *End = Buffer;
+ // Represents any left-over from the previous iteration of the
+ // parse loop. (i.e., if a message is split across the end
+ // of the buffer, it goes here)
+ string PartialMessage;
while (1)
{
// Pull the message out
string Message(Buffer,I-Buffer);
+ PartialMessage += Message;
// Fix up the buffer
for (; I < End && *I == '\n'; I++);
memmove(Buffer,I,End-Buffer);
I = Buffer;
- List.push_back(Message);
+ List.push_back(PartialMessage);
+ PartialMessage.clear();
}
- if (End == Buffer)
- return true;
+ if (End != Buffer)
+ {
+ // If there's text left in the buffer, store it
+ // in PartialMessage and throw the rest of the buffer
+ // away. This allows us to handle messages that
+ // are longer than the static buffer size.
+ PartialMessage += string(Buffer, End);
+ End = Buffer;
+ }
+ else
+ {
+ // BUG ALERT: if a message block happens to end at a
+ // multiple of 64000 characters, this will cause it to
+ // terminate early, leading to a badly formed block and
+ // probably crashing the method. However, this is the only
+ // way we have to find the end of the message block. I have
+ // an idea of how to fix this, but it will require changes
+ // to the protocol (essentially to mark the beginning and
+ // end of the block).
+ //
+ // -- dburrows 2008-04-02
+ return true;
+ }
if (WaitFd(Fd) == false)
return false;
'timegm' to convert a struct tm in UTC to a time_t. For some bizzar
reason the C library does not provide any such function :< This also
handles the weird, but unambiguous FTP time format*/
-bool StrToTime(string Val,time_t &Result)
+bool StrToTime(const string &Val,time_t &Result)
{
struct tm Tm;
char Month[10];
// Hex2Num - Convert a long hex number into a buffer /*{{{*/
// ---------------------------------------------------------------------
/* The length of the buffer must be exactly 1/2 the length of the string. */
-bool Hex2Num(string Str,unsigned char *Num,unsigned int Length)
+bool Hex2Num(const string &Str,unsigned char *Num,unsigned int Length)
{
if (Str.length() != Length*2)
return false;
return true;
}
/*}}}*/
+// ExplodeString - Split a string up into a vector /*{{{*/
+// ---------------------------------------------------------------------
+/* This can be used to split a given string up into a vector, so the
+ propose is the same as in the method above and this one is a bit slower
+ also, but the advantage is that we an iteratable vector */
+vector<string> ExplodeString(string const &haystack, char const &split) {
+ string::const_iterator start = haystack.begin();
+ string::const_iterator end = start;
+ vector<string> exploded;
+ do {
+ for (; end != haystack.end() && *end != split; ++end);
+ exploded.push_back(string(start, end));
+ start = end + 1;
+ } while (end != haystack.end() && (++end) != haystack.end());
+ return exploded;
+}
+ /*}}}*/
// RegexChoice - Simple regex list/list matcher /*{{{*/
// ---------------------------------------------------------------------
/* */
va_start(args,format);
// sprintf the description
- char S[400];
+ char S[4096];
vsnprintf(S,sizeof(S),format,args);
out << S;
}
/*}}}*/
+// strprintf - C format string outputter to C++ strings /*{{{*/
+// ---------------------------------------------------------------------
+/* This is used to make the internationalization strings easier to translate
+ and to allow reordering of parameters */
+void strprintf(string &out,const char *format,...)
+{
+ va_list args;
+ va_start(args,format);
+
+ // sprintf the description
+ char S[4096];
+ vsnprintf(S,sizeof(S),format,args);
+ out = string(S);
+}
+ /*}}}*/
// safe_snprintf - Safer snprintf /*{{{*/
// ---------------------------------------------------------------------
/* This is a snprintf that will never (ever) go past 'End' and returns a
}
/*}}}*/
+// tolower_ascii - tolower() function that ignores the locale /*{{{*/
+// ---------------------------------------------------------------------
+/* */
+int tolower_ascii(int c)
+{
+ if (c >= 'A' and c <= 'Z')
+ return c + 32;
+ return c;
+}
+ /*}}}*/
+
// CheckDomainList - See if Host is in a , seperate list /*{{{*/
// ---------------------------------------------------------------------
/* The domain list is a comma seperate list of domains that are suffix
matched against the argument */
-bool CheckDomainList(string Host,string List)
+bool CheckDomainList(const string &Host,const string &List)
{
string::const_iterator Start = List.begin();
for (string::const_iterator Cur = List.begin(); Cur <= List.end(); Cur++)
// URI::CopyFrom - Copy from an object /*{{{*/
// ---------------------------------------------------------------------
/* This parses the URI into all of its components */
-void URI::CopyFrom(string U)
+void URI::CopyFrom(const string &U)
{
string::const_iterator I = U.begin();
SingleSlash = U.end();
// We can now write the access and path specifiers
- Access = string(U,0,FirstColon - U.begin());
+ Access.assign(U.begin(),FirstColon);
if (SingleSlash != U.end())
- Path = string(U,SingleSlash - U.begin());
+ Path.assign(SingleSlash,U.end());
if (Path.empty() == true)
Path = "/";
if (At == SingleSlash)
{
if (FirstColon < SingleSlash)
- Host = string(U,FirstColon - U.begin(),SingleSlash - FirstColon);
+ Host.assign(FirstColon,SingleSlash);
}
else
{
- Host = string(U,At - U.begin() + 1,SingleSlash - At - 1);
- User = string(U,FirstColon - U.begin(),SecondColon - FirstColon);
+ Host.assign(At+1,SingleSlash);
+ User.assign(FirstColon,SecondColon);
if (SecondColon < At)
- Password = string(U,SecondColon - U.begin() + 1,At - SecondColon - 1);
+ Password.assign(SecondColon+1,At);
}
// Now we parse the RFC 2732 [] hostnames.
// Tsk, weird.
if (InBracket == true)
{
- Host = string();
+ Host.clear();
return;
}
return;
Port = atoi(string(Host,Pos+1).c_str());
- Host = string(Host,0,Pos);
+ Host.assign(Host,0,Pos);
}
/*}}}*/
// URI::operator string - Convert the URI to a string /*{{{*/
// URI::SiteOnly - Return the schema and site for the URI /*{{{*/
// ---------------------------------------------------------------------
/* */
-string URI::SiteOnly(string URI)
+string URI::SiteOnly(const string &URI)
{
::URI U(URI);
- U.User = string();
- U.Password = string();
- U.Path = string();
+ U.User.clear();
+ U.Password.clear();
+ U.Path.clear();
U.Port = 0;
return U;
}
projects / apt.git / blobdiff