+#~ msgid "You should explicitly select one to install."
+#~ msgstr "请您明确地选择一个来进行安装。"
+
+#~ msgid ""
+#~ "Package %s is not available, but is referred to by another package.\n"
+#~ "This may mean that the package is missing, has been obsoleted, or\n"
+#~ "is only available from another source\n"
+#~ msgstr ""
+#~ "现在没有可用的软件包 %s，但是它被其它的软件包引用了。\n"
+#~ "这可能意味着这个缺失的软件包可能已被废弃，\n"
+#~ "或者只能在其他发布源中找到\n"
+
+#~ msgid "However the following packages replace it:"
+#~ msgstr "可是下列软件包取代了它："
+
+#~ msgid "Package '%s' has no installation candidate"
+#~ msgstr "软件包 %s 没有可供安装的候选者"
+
+#~ msgid "Virtual packages like '%s' can't be removed\n"
+#~ msgstr "类似 %s 的虚拟软件包可以卸载\n"
+
+#, fuzzy
+#~ msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n"
+#~ msgstr "软件包 %s 还未安装，因而不会被卸载\n"
+
+#, fuzzy
+#~ msgid "Package '%s' is not installed, so not removed\n"
+#~ msgstr "软件包 %s 还未安装，因而不会被卸载\n"
+
+#~ msgid "Note, selecting '%s' instead of '%s'\n"
+#~ msgstr "注意，选取 %s 而非 %s\n"
+
+#~ msgid "Skipping %s, it is already installed and upgrade is not set.\n"
+#~ msgstr "忽略了 %s，它已经被安装而且没有指定要升级。\n"
+
+#~ msgid "Skipping %s, it is not installed and only upgrades are requested.\n"
+#~ msgstr "忽略了 %s，它已经被安装而且仅请求了升级。\n"
+
+#~ msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n"
+#~ msgstr "不能重新安装 %s，因为无法下载它。\n"
+
+#~ msgid "%s is already the newest version.\n"
+#~ msgstr "%s 已经是最新的版本了。\n"
+
+#~ msgid "Selected version '%s' (%s) for '%s'\n"
+#~ msgstr "为 %3$s 选定了版本 %1$s (%2$s)\n"
+
+#, fuzzy
+#~ msgid "Selected version '%s' (%s) for '%s' because of '%s'\n"
+#~ msgstr "为 %3$s 选定了版本 %1$s (%2$s)\n"
+
+#~ msgid "Ignore unavailable target release '%s' of package '%s'"
+#~ msgstr "忽略不可用的软件包 %2$s 的目标发行版本 %1$s"
+
+#~ msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member"
+#~ msgstr "这不是一个有效的 DEB 包文件，其包内遗漏了“%s”，“%s”或者“%s”"
+
+#~ msgid "MD5Sum mismatch"
+#~ msgstr "MD5 校验和不符"
+
+#~ msgid ""
+#~ "I wasn't able to locate a file for the %s package. This might mean you "
+#~ "need to manually fix this package."
+#~ msgstr ""
+#~ "我无法找到对应 %s 软件包的文件。在这种情况下您可能需要手动修正这个软件包。"
+
+#~ msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n"
+#~ msgstr "无法写入日志。 openpty() 失败(没有挂载 /dev/pts ？)\n"
+
+#~ msgid "Skipping nonexistent file %s"
+#~ msgstr "跳过不存在的文件 %s"
+
+#~ msgid "Failed to remove %s"
+#~ msgstr "无法卸载 %s"
+
+#~ msgid "Unable to create %s"
+#~ msgstr "无法创建 %s "
+
+#~ msgid "Failed to stat %sinfo"
+#~ msgstr "无法读取 %sinfo 的状态"
+
+#~ msgid "The info and temp directories need to be on the same filesystem"
+#~ msgstr "info 和 temp 目录要求处于同一文件系统之下"
+
+#~ msgid "Failed to change to the admin dir %sinfo"
+#~ msgstr "无法切换工作目录到 admin 目录 %sinfo"
+
+#~ msgid "Internal error getting a package name"
+#~ msgstr "在获取软件包名字时出现内部错误"
+
+#~ msgid "Reading file listing"
+#~ msgstr "正在读取文件列表"
+
+#~ msgid ""
+#~ "Failed to open the list file '%sinfo/%s'. If you cannot restore this file "
+#~ "then make it empty and immediately re-install the same version of the "
+#~ "package!"
+#~ msgstr ""
+#~ "无法打开列表文件“%sinfo/%s”。如果您不能恢复这个文件，那么就清空该文件并马"
+#~ "上重新安装相同版本的这个软件包！"
+
+#~ msgid "Failed reading the list file %sinfo/%s"
+#~ msgstr "无法读取列表文件 %sinfo/%s"
+
+#~ msgid "Internal error getting a node"
+#~ msgstr "获得一个节点时出现内部错误"
+
+#~ msgid "Failed to open the diversions file %sdiversions"
+#~ msgstr "无法打开转移配置文件 %sdiversions"
+
+#~ msgid "The diversion file is corrupted"
+#~ msgstr "该转移配置文件被损坏了"
+
+#~ msgid "Invalid line in the diversion file: %s"
+#~ msgstr "转移配置文件中有一行是无效的：%s"
+
+#~ msgid "Internal error adding a diversion"
+#~ msgstr "添加转移配置时出现内部错误"
+
+#~ msgid "The pkg cache must be initialized first"
+#~ msgstr "必须首先初始化软件包缓存"
+
+#~ msgid "Failed to find a Package: header, offset %lu"
+#~ msgstr "无法找到某个软件包：包头，于偏移位置 %lu"
+
+#~ msgid "Bad ConfFile section in the status file. Offset %lu"
+#~ msgstr "状态文件中有错误的 ConfFile 段。位于偏移位置 %lu"
+
+#~ msgid "Error parsing MD5. Offset %lu"
+#~ msgstr "解析 MD5 出错。文件内偏移量为 %lu"
+
+#~ msgid "Couldn't change to %s"
+#~ msgstr "无法切换工作目录到 %s"
+
+#~ msgid "Failed to locate a valid control file"
+#~ msgstr "无法在归档文件中找到有效的主控文件"
+
+#~ msgid "Couldn't open pipe for %s"
+#~ msgstr "无法为 %s 开启管道"
+
+#~ msgid "Read error from %s process"
+#~ msgstr "从 %s 进程读取数据出错"
+
+#~ msgid "Got a single header line over %u chars"
+#~ msgstr "接收到一行报头行，它的长度超过了 %u 个字符"
+
+#~ msgid "Note: This is done automatic and on purpose by dpkg."
+#~ msgstr "注意：这是自动被 dpkg 有意完成的。"
+
+#~ msgid "Malformed override %s line %lu #1"
+#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #1"
+
+#~ msgid "Malformed override %s line %lu #2"
+#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #2"
+
+#~ msgid "Malformed override %s line %lu #3"
+#~ msgstr "override 文件 %s 第 %lu 行的格式有误 #3"
+
+#~ msgid "decompressor"
+#~ msgstr "解压程序"
+
+#~ msgid "read, still have %lu to read but none left"
+#~ msgstr "读取文件出错，还剩 %lu 字节没有读出"
+
+#~ msgid "write, still have %lu to write but couldn't"
+#~ msgstr "写入文件出错，还剩 %lu 字节没有保存"
+
+#~ msgid ""
+#~ "Could not perform immediate configuration on already unpacked '%s'. "
+#~ "Please see man 5 apt.conf under APT::Immediate-Configure for details."
+#~ msgstr ""
+#~ "无法立即对已经解包的 %s 进行配置。请查看 man 5 apt.conf 中的 APT::"
+#~ "Immediate-Configure。"
+
+#~ msgid "Error occurred while processing %s (NewPackage)"
+#~ msgstr "处理 %s (NewPackage)时出错"
+
+#~ msgid "Error occurred while processing %s (UsePackage1)"
+#~ msgstr "处理 %s (UsePackage1)时出错"
+
+#~ msgid "Error occurred while processing %s (NewFileDesc1)"
+#~ msgstr "处理 %s (NewFileDesc1)时出错"
+
+#~ msgid "Error occurred while processing %s (UsePackage2)"
+#~ msgstr "处理 %s (UsePackage2)时出错"
+
+#~ msgid "Error occurred while processing %s (NewFileVer1)"
+#~ msgstr "处理 %s (NewFileVer1)时出错"
+
+#~ msgid "Error occurred while processing %s (NewVersion%d)"
+#~ msgstr "处理 %s (NewVersion%d)时出错"
+
+#~ msgid "Error occurred while processing %s (UsePackage3)"
+#~ msgstr "处理 %s (UsePackage3)时出错"
+
+#~ msgid "Error occurred while processing %s (NewFileDesc2)"
+#~ msgstr "处理 %s (NewFileDesc2)时出错"
+
+#~ msgid "Error occurred while processing %s (FindPkg)"
+#~ msgstr "处理 %s (FindPkg)时出错"
+
+#~ msgid "Error occurred while processing %s (CollectFileProvides)"
+#~ msgstr "处理 %s (CollectFileProvides)时出错"
+
+#~ msgid "Internal error, could not locate member"
+#~ msgstr "内部错误，无法定位包内文件"
+
+#~ msgid "Internal error, group '%s' has no installable pseudo package"
+#~ msgstr "内部错误，组 %s 没有可安装的 pseudo 软件包"
+
+#~ msgid "Release file expired, ignoring %s (invalid since %s)"
+#~ msgstr "Release 文件已过期，忽略 %s (从 %s 起无效)"
projects / apt.git / blobdiff