echo "${CDONE}DONE${CNORMAL}";
fi
}
-
+getaptconfig() {
+ if [ -f ./aptconfig.conf ]; then
+ echo "./aptconfig.conf"
+ elif [ -f ../aptconfig.conf ]; then
+ echo "../aptconfig.conf"
+ fi
+}
runapt() {
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
local CMD="$1"
shift
- if [ -f ./aptconfig.conf ]; then
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$CMD "$@"
- elif [ -f ../aptconfig.conf ]; then
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$CMD "$@"
- else
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$CMD "$@"
- fi
+ case $CMD in
+ sh|aptitude|*/*) ;;
+ *) CMD="${BUILDDIRECTORY}/$CMD";;
+ esac
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG="$(getaptconfig)" LD_LIBRARY_PATH=${BUILDDIRECTORY} $CMD "$@"
}
aptconfig() { runapt apt-config "$@"; }
aptcache() { runapt apt-cache "$@"; }
aptkey() { runapt apt-key "$@"; }
aptmark() { runapt apt-mark "$@"; }
apt() { runapt apt "$@"; }
-aptwebserver() {
- LD_LIBRARY_PATH=${APTWEBSERVERBINDIR} ${APTWEBSERVERBINDIR}/aptwebserver "$@";
-}
+apthelper() { runapt "${APTHELPERBINDIR}/apt-helper" "$@"; }
+aptwebserver() { runapt "${APTWEBSERVERBINDIR}/aptwebserver" "$@"; }
+aptitude() { runapt aptitude "$@"; }
+aptextracttemplates() { runapt apt-extracttemplates "$@"; }
+
dpkg() {
command dpkg --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log "$@"
}
-aptitude() {
- if [ -f ./aptconfig.conf ]; then
- APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} command aptitude "$@"
- elif [ -f ../aptconfig.conf ]; then
- APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} command aptitude "$@"
- else
- LD_LIBRARY_PATH=${BUILDDIRECTORY} command aptitude "$@"
- fi
+dpkgcheckbuilddeps() {
+ command dpkg-checkbuilddeps --admindir=${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg "$@"
}
gdb() {
echo "gdb: run »$*«"
- APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} command gdb ${BUILDDIRECTORY}/$1 --args "$@"
-}
-http() {
- LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/methods/http
+ APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${LIBRARYPATH} command gdb ${BUILDDIRECTORY}/$1 --args "$@"
}
gpg() {
# see apt-key for the whole trickery. Setup is done in setupenvironment
# allow overriding the default BUILDDIR location
BUILDDIRECTORY=${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}
+ LIBRARYPATH=${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}
METHODSDIR=${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}
+ APTHELPERBINDIR=${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}
APTWEBSERVERBINDIR=${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
mkdir rootdir aptarchive keys
cd rootdir
mkdir -p etc/apt/apt.conf.d etc/apt/sources.list.d etc/apt/trusted.gpg.d etc/apt/preferences.d
- mkdir -p var/cache var/lib var/log tmp
+ mkdir -p var/cache var/lib/apt var/log tmp
mkdir -p var/lib/dpkg/info var/lib/dpkg/updates var/lib/dpkg/triggers
touch var/lib/dpkg/available
mkdir -p usr/lib/apt
- ln -s ${BUILDDIRECTORY}/methods usr/lib/apt/methods
+ ln -s ${METHODSDIR} usr/lib/apt/methods
+ ln -s ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove etc/apt/apt.conf.d/01autoremove
cd ..
local PACKAGESFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Packages-/' -e 's/^skip-/Packages-/')
if [ -f "${TESTDIRECTORY}/${PACKAGESFILE}" ]; then
echo 'quiet::NoUpdate "true";' >> aptconfig.conf
echo "Acquire::https::CaInfo \"${TESTDIR}/apt.pem\";" > rootdir/etc/apt/apt.conf.d/99https
echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
- export LC_ALL=C.UTF-8
- export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
# gpg needs a trustdb to function, but it can't be invalid (not even empty)
# newer gpg versions are fine without it, but play it safe for now
gpg --quiet --check-trustdb --secret-keyring $SECRETKEYRING --keyring $SECRETKEYRING >/dev/null 2>&1
+ # cleanup the environment a bit
+ export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
+ export LC_ALL=C.UTF-8
+ unset LANGUAGE APT_CONFIG
+ unset GREP_OPTIONS DEB_BUILD_PROFILES
+
msgdone "info"
}
echo "$(aptconfig dump | grep APT::Architecture | cut -d'"' -f 2 | sed '/^$/ d' | sort | uniq | tr '\n' ' ')"
}
+getarchitecturesfromcommalist() {
+ echo "$1" | sed -e 's#,#\n#g' | sed -e "s/^native\$/$(getarchitecture 'native')/"
+}
+
configarchitecture() {
{
echo "APT::Architecture \"$(getarchitecture $1)\";"
local SECTION="${7:-others}"
local PRIORITY="${8:-optional}"
local FILE_TREE="$9"
+ local COMPRESS_TYPE="${10:-gzip}"
local DISTSECTION
if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
DISTSECTION="main"
# fi
done
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
rm -rf ${BUILDDIR}/debian/tmp
mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
local LOG="${BUILDDIR}/../${NAME}_${VERSION}_${arch}.dpkg-deb.log"
# ensure the right permissions as dpkg-deb ensists
chmod 755 ${BUILDDIR}/debian/tmp/DEBIAN
- if ! dpkg-deb --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/.. >$LOG 2>&1; then
+ if ! dpkg-deb -Z${COMPRESS_TYPE} --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/.. >$LOG 2>&1; then
cat $LOG
false
fi
something went horribly wrong! They are autogenerated
und used only by testcases and surf no other propose…"}"
local ARCHS=""
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
if [ "$arch" = 'all' -o "$arch" = 'none' ]; then
ARCHS="$(getarchitectures)"
else
local FILE='rootdir/var/lib/dpkg/status'
local INFO='rootdir/var/lib/dpkg/info'
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
echo "Package: $NAME
Status: $STATUS
Priority: $PRIORITY
webserverconfig() {
msgtest "Set webserver config option '${1}' to" "$2"
- downloadfile "http://localhost:8080/_config/set/${1}/${2}" '/dev/null' >/dev/null
- local DOWNLOG='download-testfile.log'
- rm -f "$DOWNLOG"
- local STATUS="${TMPWORKINGDIRECTORY}/rootdir/tmp/webserverconfig.status"
- downloadfile "http://localhost:8080/_config/find/aptwebserver::last-status-code" "$STATUS" > "$DOWNLOG"
- if [ "$(cat "$STATUS")" = '200' ]; then
+ local DOWNLOG='rootdir/tmp/download-testfile.log'
+ local STATUS='rootdir/tmp/webserverconfig.status'
+ rm -f "$STATUS" "$DOWNLOG"
+ if downloadfile "http://localhost:8080/_config/set/${1}/${2}" "$STATUS" > "$DOWNLOG"; then
msgpass
else
- cat >&2 "$DOWNLOG"
- msgfail "Statuscode was $(cat "$STATUS")"
+ cat "$DOWNLOG" "$STATUS"
+ msgfail
fi
- rm "$STATUS"
+ testwebserverlaststatuscode '200'
}
rewritesourceslist() {
fi
if test -x ${APTWEBSERVERBINDIR}/aptwebserver; then
cd aptarchive
- if ! aptwebserver -o aptwebserver::fork=1 "$@" >webserver.log 2>&1 ; then
+ local LOG="webserver.log"
+ if ! aptwebserver -o aptwebserver::fork=1 "$@" >$LOG 2>&1 ; then
cat $LOG
false
fi
msgdie 'You need to install stunnel4 for https testcases'
fi
if [ ! -e "${TMPWORKINGDIRECTORY}/aptarchive/aptwebserver.pid" ]; then
- changetowebserver --no-rewrite
+ changetowebserver --no-rewrite "$@"
fi
echo "pid = ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid
cert = ${TESTDIRECTORY}/apt.pem
changetocdrom() {
mkdir -p rootdir/media/cdrom/.disk
local CD="$(readlink -f rootdir/media/cdrom)"
- echo "acquire::cdrom::mount \"${CD}\";" > rootdir/etc/apt/apt.conf.d/00cdrom
- echo 'acquire::cdrom::autodetect 0;' >> rootdir/etc/apt/apt.conf.d/00cdrom
+ echo "acquire::cdrom::mount \"${CD}\";
+acquire::cdrom::${CD}/::mount \"mv ${CD}-unmounted ${CD}\";
+acquire::cdrom::${CD}/::umount \"mv ${CD} ${CD}-unmounted\";
+acquire::cdrom::autodetect 0;" > rootdir/etc/apt/apt.conf.d/00cdrom
echo -n "$1" > ${CD}/.disk/info
if [ ! -d aptarchive/dists ]; then
msgdie 'Flat file archive cdroms can not be created currently'
return 1
fi
- mv aptarchive/dists $CD
+ mv aptarchive/dists "$CD"
ln -s "$(readlink -f ./incoming)" $CD/pool
find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list' -delete
+ # start with an unmounted disk
+ mv "${CD}" "${CD}-unmounted"
+ # we don't want the disk to be modifiable
+ addtrap 'prefix' "chmod -f -R +w $PWD/rootdir/media/cdrom/dists/ $PWD/rootdir/media/cdrom-unmounted/dists/ || true;"
+ chmod -R -w rootdir/media/cdrom-unmounted/dists
}
downloadfile() {
- PROTO="$(echo "$1" | cut -d':' -f 1)"
- local DOWNLOG="${TMPWORKINGDIRECTORY}/download.log"
- rm -f "$DOWNLOG"
- touch "$DOWNLOG"
- {
- echo "601 Configuration
-Config-Item: Acquire::https::CaInfo=${TESTDIR}/apt.pem
-Config-Item: Debug::Acquire::${PROTO}=1
-
-600 Acquire URI
-URI: $1
-Filename: ${2}
-"
- # simple worker keeping stdin open until we are done (201) or error (400)
- # and requesting new URIs on try-agains/redirects inbetween
- { tail -n 999 -f "$DOWNLOG" & echo "TAILPID: $!"; } | while read f1 f2; do
- if [ "$f1" = 'TAILPID:' ]; then
- TAILPID="$f2"
- elif [ "$f1" = 'New-URI:' ]; then
- echo "600 Acquire URI
-URI: $f2
-Filename: ${2}
-"
- elif [ "$f1" = '201' ] || [ "$f1" = '400' ]; then
- # tail would only die on next read – which never happens
- test -z "$TAILPID" || kill -s HUP "$TAILPID"
- break
- fi
- done
- } | LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/methods/${PROTO} 2>&1 | tee "$DOWNLOG"
- rm "$DOWNLOG"
+ local PROTO="$(echo "$1" | cut -d':' -f 1 )"
+ apthelper -o Debug::Acquire::${PROTO}=1 \
+ download-file "$1" "$2" 2>&1 || true
# only if the file exists the download was successful
if [ -e "$2" ]; then
return 0
checkdiff() {
local DIFFTEXT="$(command diff -u "$@" | sed -e '/^---/ d' -e '/^+++/ d' -e '/^@@/ d')"
if [ -n "$DIFFTEXT" ]; then
- echo
- echo "$DIFFTEXT"
+ echo >&2
+ echo >&2 "$DIFFTEXT"
return 1
else
return 0
fi
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequal.comparefile"
- addtrap "rm $COMPAREFILE;"
echo "$1" > $COMPAREFILE
shift
shift 2
msgtest "Test for equality OR of" "$*"
$* >$COMPAREAGAINST 2>&1 || true
- (checkdiff $COMPAREFILE1 $COMPAREAGAINST 1> /dev/null ||
- checkdiff $COMPAREFILE2 $COMPAREAGAINST 1> /dev/null) && msgpass ||
- ( echo "\n${CINFO}Diff against OR 1${CNORMAL}" "$(checkdiff $COMPAREFILE1 $COMPAREAGAINST)" \
- "\n${CINFO}Diff against OR 2${CNORMAL}" "$(checkdiff $COMPAREFILE2 $COMPAREAGAINST)" &&
- msgfail )
+ if checkdiff $COMPAREFILE1 $COMPAREAGAINST >/dev/null 2>&1 || \
+ checkdiff $COMPAREFILE2 $COMPAREAGAINST >/dev/null 2>&1
+ then
+ msgpass
+ else
+ echo -n "\n${CINFO}Diff against OR 1${CNORMAL}"
+ checkdiff $COMPAREFILE1 $COMPAREAGAINST || true
+ echo -n "${CINFO}Diff against OR 2${CNORMAL}"
+ checkdiff $COMPAREFILE2 $COMPAREAGAINST || true
+ msgfail
+ fi
}
testshowvirtual() {
msgtest "Test for non-existent packages" "apt-cache show $*"
local SHOWPKG="$(aptcache show "$@" 2>&1 | grep '^Package: ')"
if [ -n "$SHOWPKG" ]; then
- echo
- echo "$SHOWPKG"
+ echo >&2
+ echo >&2 "$SHOWPKG"
msgfail
- return 1
+ else
+ msgpass
fi
- msgpass
}
testdpkginstalled() {
msgtest "Test for correctly installed package(s) with" "dpkg -l $*"
local PKGS="$(dpkg -l "$@" 2>/dev/null | grep '^i' | wc -l)"
if [ "$PKGS" != $# ]; then
- echo $PKGS
- dpkg -l "$@" | grep '^[a-z]'
+ echo >&2 $PKGS
+ dpkg -l "$@" | grep '^[a-z]' >&2
msgfail
- return 1
+ else
+ msgpass
fi
- msgpass
}
testdpkgnotinstalled() {
local PKGS="$(dpkg -l "$@" 2> /dev/null | grep '^i' | wc -l)"
if [ "$PKGS" != 0 ]; then
echo
- dpkg -l "$@" | grep '^[a-z]'
+ dpkg -l "$@" | grep '^[a-z]' >&2
msgfail
- return 1
+ else
+ msgpass
fi
- msgpass
}
testmarkedauto() {
if $@ >${OUTPUT} 2>&1; then
msgpass
else
- echo
- cat $OUTPUT
+ echo >&2
+ cat >&2 $OUTPUT
msgfail
fi
}
if [ "$1" = '--nomsg' ]; then
shift
else
- msgtest 'Test for failure in execution of' "$*"
+ msgtest 'Test for failure in execution of' "$*"
fi
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfailure.output"
if $@ >${OUTPUT} 2>&1; then
- echo
- cat $OUTPUT
+ echo >&2
+ cat >&2 $OUTPUT
msgfail
else
msgpass
fi
}
+testwebserverlaststatuscode() {
+ local DOWNLOG='rootdir/tmp/webserverstatus-testfile.log'
+ local STATUS='rootdir/tmp/webserverstatus-statusfile.log'
+ rm -f "$DOWNLOG" "$STATUS"
+ msgtest 'Test last status code from the webserver was' "$1"
+ downloadfile "http://localhost:8080/_config/find/aptwebserver::last-status-code" "$STATUS" > "$DOWNLOG"
+ if [ "$(cat "$STATUS")" = "$1" ]; then
+ msgpass
+ else
+ echo >&2
+ if [ -n "$2" ]; then
+ shift
+ echo >&2 '#### Additionally provided output files contain:'
+ cat >&2 "$@"
+ fi
+ echo >&2 '#### Download log of the status code:'
+ cat >&2 "$DOWNLOG"
+ msgfail "Status was $(cat "$STATUS")"
+ fi
+}
+
pause() {
echo "STOPPED execution. Press enter to continue"
local IGNORE
projects / apt.git / blobdiff