msgstr ""
"Project-Id-Version: apt 0.5.4\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2015-10-05 18:29+0200\n"
+"POT-Creation-Date: 2015-10-27 10:30+0100\n"
"PO-Revision-Date: 2009-01-28 10:41+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
msgid "Note, selecting '%s' instead of '%s'\n"
msgstr "注意，選擇了以 %s 替代 %s\n"
+#: apt-private/private-cmndline.cc
+msgid "Most used commands:"
+msgstr ""
+
+#: apt-private/private-cmndline.cc
+#, c-format
+msgid "See %s for more information about the available commands."
+msgstr ""
+
+#: apt-private/private-cmndline.cc
+msgid ""
+"Configuration options and syntax is detailed in apt.conf(5).\n"
+"Information about how to configure sources can be found in sources.list(5).\n"
+"Package and version choices can be expressed via apt_preferences(5).\n"
+"Security details are available in apt-secure(8).\n"
+msgstr ""
+
+#: apt-private/private-cmndline.cc
+msgid "This APT has Super Cow Powers."
+msgstr "該 APT 有著超級牛力。"
+
+#: apt-private/private-cmndline.cc
+msgid "This APT helper has Super Meep Powers."
+msgstr ""
+
+#: apt-private/private-depends.cc apt-private/private-show.cc
+#: cmdline/apt-mark.cc
+msgid "No packages found"
+msgstr "未找到套件"
+
#: apt-private/private-download.cc
msgid "WARNING: The following packages cannot be authenticated!"
msgstr "【警告】：無法驗證下列套件！"
msgid "You don't have enough free space in %s."
msgstr "在 %s 裡沒有足夠的的未使用空間。"
+#: apt-private/private-download.cc
+msgid "Unable to lock the download directory"
+msgstr "無法鎖定下載目錄"
+
#: apt-private/private-install.cc
msgid "Internal error, InstallPackages was called with broken packages!"
msgstr "內部錯誤，在損毀的套件上執行 InstallPackages！"
msgid "Some files failed to download"
msgstr "有部份檔案無法下載"
-#: apt-private/private-install.cc cmdline/apt-get.cc
+#: apt-private/private-install.cc apt-private/private-source.cc
msgid "Download complete and in download only mode"
msgstr "下載完成，且這是『僅下載』模式"
msgstr[1] "以下套件是被自動安裝進來的，且已不再會被用到了："
#: apt-private/private-install.cc
-#, fuzzy
+#, fuzzy, c-format
msgid "Use '%s' to remove it."
msgid_plural "Use '%s' to remove them."
msgstr[0] "使用 '%s' 來將其移除。"
msgid "Regex compilation error - %s"
msgstr "編譯正規表示式時發生錯誤 - %s"
-#: apt-private/private-search.cc cmdline/apt-cache.cc
+#: apt-private/private-search.cc
#, fuzzy
msgid "You must give at least one search pattern"
msgstr "您必須明確得給定一個樣式"
msgid "not a real package (virtual)"
msgstr ""
-#: apt-private/private-show.cc cmdline/apt-cache.cc cmdline/apt-mark.cc
-msgid "No packages found"
-msgstr "未找到套件"
+#: apt-private/private-show.cc apt-pkg/cacheset.cc
+#, c-format
+msgid "Unable to locate package %s"
+msgstr "找不到套件 %s"
+
+#: apt-private/private-show.cc
+msgid "Package files:"
+msgstr "套件檔："
+
+#: apt-private/private-show.cc
+msgid "Cache is out of sync, can't x-ref a package file"
+msgstr "快取資料未同步，無法 x-ref 套件檔"
+
+#. Show any packages have explicit pins
+#: apt-private/private-show.cc
+msgid "Pinned packages:"
+msgstr "鎖定的套件："
+
+#: apt-private/private-show.cc
+msgid "(not found)"
+msgstr "(未找到)"
+
+#. Print the package name and the version we are forcing to
+#: apt-private/private-show.cc
+#, c-format
+msgid "%s -> %s with priority %d\n"
+msgstr ""
+
+#: apt-private/private-show.cc
+msgid " Installed: "
+msgstr " 已安裝："
+
+#: apt-private/private-show.cc
+msgid " Candidate: "
+msgstr " 候選："
+
+#: apt-private/private-show.cc
+msgid "(none)"
+msgstr "(無)"
+
+#: apt-private/private-show.cc
+msgid " Package pin: "
+msgstr " 套件鎖定："
+
+#. Show the priority tables
+#: apt-private/private-show.cc
+msgid " Version table:"
+msgstr " 版本列表："
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid "Can not find a package for architecture '%s'"
+msgstr "無法找到套件 %s"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid "Can not find a package '%s' with version '%s'"
+msgstr "無法找到套件 %s"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid "Can not find a package '%s' with release '%s'"
+msgstr "無法找到套件 %s"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid "Picking '%s' as source package instead of '%s'\n"
+msgstr "無法取得來源套件列表 %s 的狀態"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Can not find version '%s' of package '%s'"
+msgstr ""
+
+#: apt-private/private-source.cc
+msgid "Must specify at least one package to fetch source for"
+msgstr "在取得原始碼時必須至少指定一個套件"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Unable to find a source package for %s"
+msgstr "無法找到 %s 的原始碼套件"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid ""
+"NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n"
+"%s\n"
+msgstr ""
+
+#: apt-private/private-source.cc
+#, c-format
+msgid ""
+"Please use:\n"
+"%s\n"
+"to retrieve the latest (possibly unreleased) updates to the package.\n"
+msgstr ""
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Skipping already downloaded file '%s'\n"
+msgstr "略過已下載的檔案 '%s'\n"
+
+#. TRANSLATOR: The required space between number and unit is already included
+#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
+#: apt-private/private-source.cc
+#, c-format
+msgid "Need to get %sB/%sB of source archives.\n"
+msgstr "需要下載 %sB/%sB 的原始套件檔。\n"
+
+#. TRANSLATOR: The required space between number and unit is already included
+#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
+#: apt-private/private-source.cc
+#, c-format
+msgid "Need to get %sB of source archives.\n"
+msgstr "需要下載 %sB 的原始套件檔。\n"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Fetch source %s\n"
+msgstr "取得原始碼 %s\n"
+
+#: apt-private/private-source.cc
+msgid "Failed to fetch some archives."
+msgstr "無法取得某些套件檔。"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Skipping unpack of already unpacked source in %s\n"
+msgstr "不解開，因原始碼已解開至 %s\n"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Unpack command '%s' failed.\n"
+msgstr "解開指令 '%s' 失敗。\n"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Check if the 'dpkg-dev' package is installed.\n"
+msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Build command '%s' failed.\n"
+msgstr "編譯指令 '%s' 失敗。\n"
+
+#: apt-private/private-source.cc
+msgid "Must specify at least one package to check builddeps for"
+msgstr "在檢查編譯相依關係時必須至少指定一個套件"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid ""
+"No architecture information available for %s. See apt.conf(5) APT::"
+"Architectures for setup"
+msgstr ""
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Note, using directory '%s' to get the build dependencies\n"
+msgstr ""
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid "Note, using file '%s' to get the build dependencies\n"
+msgstr "無法處理編譯相依關係"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Unable to get build-dependency information for %s"
+msgstr "無法取得 %s 的編譯相依關係資訊"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "%s has no build depends.\n"
+msgstr "%s 沒有編譯相依關係。\n"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid ""
+"%s dependency for %s can't be satisfied because %s is not allowed on '%s' "
+"packages"
+msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid ""
+"%s dependency for %s cannot be satisfied because the package %s cannot be "
+"found"
+msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Failed to satisfy %s dependency for %s: Installed package %s is too new"
+msgstr "無法滿足 %2$s 的相依關係 %1$s：已安裝的套件 %3$s 太新了"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid ""
+"%s dependency for %s cannot be satisfied because candidate version of "
+"package %s can't satisfy version requirements"
+msgstr ""
+"無法滿足 %2$s 所要求的 %1$s 相依關係，因為套件 %3$s 沒有版本符合其版本需求"
+
+#: apt-private/private-source.cc
+#, fuzzy, c-format
+msgid ""
+"%s dependency for %s cannot be satisfied because package %s has no candidate "
+"version"
+msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Failed to satisfy %s dependency for %s: %s"
+msgstr "無法滿足 %2$s 的相依關係 %1$s：%3$s"
+
+#: apt-private/private-source.cc
+#, c-format
+msgid "Build-dependencies for %s could not be satisfied."
+msgstr "無法滿足套件 %s 的編譯相依關係。"
+
+#: apt-private/private-source.cc
+msgid "Failed to process build dependencies"
+msgstr "無法處理編譯相依關係"
#: apt-private/private-sources.cc
#, fuzzy, c-format
msgid "This command is deprecated. Please use 'apt-mark showauto' instead."
msgstr ""
-#: cmdline/apt-cache.cc apt-pkg/cacheset.cc
-#, c-format
-msgid "Unable to locate package %s"
-msgstr "找不到套件 %s"
-
#: cmdline/apt-cache.cc
-msgid "Package files:"
-msgstr "套件檔："
+msgid ""
+"Usage: apt-cache [options] command\n"
+" apt-cache [options] show pkg1 [pkg2 ...]\n"
+"\n"
+"apt-cache queries and displays available information about installed\n"
+"as well as installable packages. It works exclusively on the data\n"
+"acquired via the 'update' command of e.g. apt-get to the local cache.\n"
+"The displayed information can therefore be outdated if the last update\n"
+"is too long ago, but in exchange apt-cache works independently of the\n"
+"availability of the configured sources (e.g. offline).\n"
+msgstr ""
#: cmdline/apt-cache.cc
-msgid "Cache is out of sync, can't x-ref a package file"
-msgstr "快取資料未同步，無法 x-ref 套件檔"
+msgid "Show source records"
+msgstr "顯示原始碼報告"
-#. Show any packages have explicit pins
#: cmdline/apt-cache.cc
-msgid "Pinned packages:"
-msgstr "鎖定的套件："
+msgid "Search the package list for a regex pattern"
+msgstr "根據正規表示式搜索套件列表"
#: cmdline/apt-cache.cc
-msgid "(not found)"
-msgstr "(未找到)"
+msgid "Show raw dependency information for a package"
+msgstr "顯示該套件的原始相依關係的資訊"
-#. Print the package name and the version we are forcing to
#: cmdline/apt-cache.cc
-#, c-format
-msgid "%s -> %s with priority %d\n"
-msgstr ""
+msgid "Show reverse dependency information for a package"
+msgstr "顯示所有相依於該套件的套件名稱"
#: cmdline/apt-cache.cc
-msgid " Installed: "
-msgstr " 已安裝："
+msgid "Show a readable record for the package"
+msgstr "顯示該套件的易於閱讀的報告"
#: cmdline/apt-cache.cc
-msgid " Candidate: "
-msgstr " 候選："
+msgid "List the names of all packages in the system"
+msgstr "列出系統中所有套件"
#: cmdline/apt-cache.cc
-msgid "(none)"
-msgstr "(無)"
+msgid "Show policy settings"
+msgstr "顯示套件的可安裝版本資訊"
-#: cmdline/apt-cache.cc
-msgid " Package pin: "
-msgstr " 套件鎖定："
+#: cmdline/apt.cc
+msgid ""
+"Usage: apt [options] command\n"
+"\n"
+"apt is a commandline package manager and provides commands for\n"
+"searching and managing as well as querying information about packages.\n"
+"It provides the same functionality as the specialized APT tools,\n"
+"like apt-get and apt-cache, but enables options more suitable for\n"
+"interactive use by default.\n"
+msgstr ""
-#. Show the priority tables
-#: cmdline/apt-cache.cc
-msgid " Version table:"
-msgstr " 版本列表："
+#. query
+#: cmdline/apt.cc
+msgid "list packages based on package names"
+msgstr ""
-#: cmdline/apt-cache.cc
+#: cmdline/apt.cc
#, fuzzy
-msgid ""
-"Usage: apt-cache [options] command\n"
-" apt-cache [options] showpkg pkg1 [pkg2 ...]\n"
-" apt-cache [options] showsrc pkg1 [pkg2 ...]\n"
-"\n"
-"apt-cache is a low-level tool used to query information\n"
-"from APT's binary cache files\n"
-"\n"
-"Commands:\n"
-" gencaches - Build both the package and source cache\n"
-" showpkg - Show some general information for a single package\n"
-" showsrc - Show source records\n"
-" stats - Show some basic statistics\n"
-" dump - Show the entire file in a terse form\n"
-" dumpavail - Print an available file to stdout\n"
-" unmet - Show unmet dependencies\n"
-" search - Search the package list for a regex pattern\n"
-" show - Show a readable record for the package\n"
-" depends - Show raw dependency information for a package\n"
-" rdepends - Show reverse dependency information for a package\n"
-" pkgnames - List the names of all packages in the system\n"
-" dotty - Generate package graphs for GraphViz\n"
-" xvcg - Generate package graphs for xvcg\n"
-" policy - Show policy settings\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -p=? The package cache.\n"
-" -s=? The source cache.\n"
-" -q Disable progress indicator.\n"
-" -i Show only important deps for the unmet command.\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-"See the apt-cache(8) and apt.conf(5) manual pages for more information.\n"
-msgstr ""
-"用法：apt-cache [選項] 指令\n"
-" apt-cache [選項] add 檔案1 [檔案2 ...]\n"
-" apt-cache [選項] showpkg 套件1 [套件2 ...]\n"
-" apt-cache [選項] showsrc 套件1 [套件2 ...]\n"
-"\n"
-"apt-cache 是一個低階的工具，可用來操作 APT 的二進制快取檔，也可用來\n"
-"查詢那些檔案中的相關訊息\n"
-"\n"
-"指令:\n"
-" add - 把套件檔加入原始碼快取中\n"
-" gencaches - 同時產生套件和原始碼的快取\n"
-" showpkg - 顯示某單一套件的一般資訊\n"
-" showsrc - 顯示原始碼報告\n"
-" stats - 顯示一些基本的統計資訊\n"
-" dump - 簡要得顯示整個檔案\n"
-" dumpavail - 將可用的檔案列印至標準輸出\n"
-" unmet - 顯示所有未滿足的相依關係\n"
-" search - 根據正規表示式搜索套件列表\n"
-" show - 顯示該套件的易於閱讀的報告\n"
-" depends - 顯示該套件的原始相依關係的資訊\n"
-" rdepends - 顯示所有相依於該套件的套件名稱\n"
-" pkgnames - 列出系統中所有套件\n"
-" dotty - 產生用於 GraphViz 的套件關係圖\n"
-" xvcg - 產生用於 xvcg 的套件的關係圖\n"
-" policy - 顯示套件的可安裝版本資訊\n"
-"\n"
-"選項：\n"
-" -h 本幫助訊息。\n"
-" -p=? 套件的快取。\n"
-" -s=? 原始碼的快取。\n"
-" -q 關閉進度顯示。\n"
-" -i 僅為 unmet 指令顯示重要的相依關係。\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-"請參閱 apt-cache(8) 及 apt.conf(5) 參考手冊以取得更多資訊。\n"
+msgid "search in package descriptions"
+msgstr "正在讀取套件清單"
#: cmdline/apt.cc
-msgid ""
-"Usage: apt [options] command\n"
-"\n"
-"CLI for apt.\n"
-"Basic commands: \n"
-" list - list packages based on package names\n"
-" search - search in package descriptions\n"
-" show - show package details\n"
-"\n"
-" update - update list of available packages\n"
-"\n"
-" install - install packages\n"
-" remove - remove packages\n"
-" autoremove - Remove automatically all unused packages\n"
-"\n"
-" upgrade - upgrade the system by installing/upgrading packages\n"
-" full-upgrade - upgrade the system by removing/installing/upgrading "
-"packages\n"
-"\n"
-" edit-sources - edit the source information file\n"
+msgid "show package details"
msgstr ""
+#. package stuff
+#: cmdline/apt.cc
+#, fuzzy
+msgid "install packages"
+msgstr "鎖定的套件："
+
+#: cmdline/apt.cc
+#, fuzzy
+msgid "remove packages"
+msgstr "損毀的套件"
+
+#: cmdline/apt.cc cmdline/apt-get.cc
+msgid "Remove automatically all unused packages"
+msgstr "自動移除所有不再使用的套件"
+
+#. system wide stuff
+#: cmdline/apt.cc
+#, fuzzy
+msgid "update list of available packages"
+msgstr "%s 被設定為手動安裝。\n"
+
+#: cmdline/apt.cc
+msgid "upgrade the system by installing/upgrading packages"
+msgstr ""
+
+#: cmdline/apt.cc
+msgid "upgrade the system by removing/installing/upgrading packages"
+msgstr ""
+
+#. misc
+#: cmdline/apt.cc
+#, fuzzy
+msgid "edit the source information file"
+msgstr "正在讀取狀態資料"
+
#: cmdline/apt-cdrom.cc
#, fuzzy
msgid "Please provide a name for this Disc, such as 'Debian 5.0.3 Disk 1'"
msgid "Repeat this process for the rest of the CDs in your set."
msgstr "請對您的光碟組中的其它光碟重複相同的操作。"
-#: cmdline/apt-config.cc
-msgid "Arguments not in pairs"
-msgstr "參數並未成對"
-
-#: cmdline/apt-config.cc
-msgid ""
-"Usage: apt-config [options] command\n"
-"\n"
-"apt-config is a simple tool to read the APT config file\n"
-"\n"
-"Commands:\n"
-" shell - Shell mode\n"
-" dump - Show the configuration\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-msgstr ""
-"用法：apt-config [選項] 指令\n"
-"\n"
-"apt-config 是一個用於讀取 APT 設定檔的簡單工具\n"
-"\n"
-"指令:\n"
-" shell - Shell 模式\n"
-" dump - 顯示設定\n"
-"\n"
-"選項：\n"
-" -h 本幫助訊息。\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-
-#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid "Can not find a package for architecture '%s'"
-msgstr "無法找到套件 %s"
-
-#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid "Can not find a package '%s' with version '%s'"
-msgstr "無法找到套件 %s"
-
-#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid "Can not find a package '%s' with release '%s'"
-msgstr "無法找到套件 %s"
-
-#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid "Picking '%s' as source package instead of '%s'\n"
-msgstr "無法取得來源套件列表 %s 的狀態"
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Can not find version '%s' of package '%s'"
-msgstr ""
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Couldn't find package %s"
-msgstr "無法找到套件 %s"
-
-#: cmdline/apt-get.cc cmdline/apt-mark.cc
-#, fuzzy, c-format
-msgid "%s set to automatically installed.\n"
-msgstr "%s 被設定為手動安裝。\n"
-
-#: cmdline/apt-get.cc cmdline/apt-mark.cc
-msgid ""
-"This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' "
-"instead."
-msgstr ""
-
-#: cmdline/apt-get.cc
-msgid "Internal error, problem resolver broke stuff"
-msgstr "內部錯誤，問題排除器造成了損壞"
-
-#: cmdline/apt-get.cc
-msgid "Unable to lock the download directory"
-msgstr "無法鎖定下載目錄"
-
-#: cmdline/apt-get.cc
-msgid "Must specify at least one package to fetch source for"
-msgstr "在取得原始碼時必須至少指定一個套件"
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Unable to find a source package for %s"
-msgstr "無法找到 %s 的原始碼套件"
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid ""
-"NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n"
-"%s\n"
-msgstr ""
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid ""
-"Please use:\n"
-"%s\n"
-"to retrieve the latest (possibly unreleased) updates to the package.\n"
-msgstr ""
-
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Skipping already downloaded file '%s'\n"
-msgstr "略過已下載的檔案 '%s'\n"
+#: cmdline/apt-cdrom.cc
+msgid ""
+"Usage: apt-cdrom [options] command\n"
+"\n"
+"apt-cdrom is used to add CDROM's, USB flashdrives and other removable\n"
+"media types as package sources to APT. The mount point and device\n"
+"information is taken from apt.conf(5), udev(7) and fstab(5).\n"
+msgstr ""
-#. TRANSLATOR: The required space between number and unit is already included
-#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Need to get %sB/%sB of source archives.\n"
-msgstr "需要下載 %sB/%sB 的原始套件檔。\n"
+#: cmdline/apt-config.cc
+msgid "Arguments not in pairs"
+msgstr "參數並未成對"
-#. TRANSLATOR: The required space between number and unit is already included
-#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Need to get %sB of source archives.\n"
-msgstr "需要下載 %sB 的原始套件檔。\n"
+#: cmdline/apt-config.cc
+msgid ""
+"Usage: apt-config [options] command\n"
+"\n"
+"apt-config is an interface to the configuration settings used by\n"
+"all APT tools to be used mainly in debugging and shell scripting.\n"
+msgstr ""
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Fetch source %s\n"
-msgstr "取得原始碼 %s\n"
+#: cmdline/apt-config.cc
+msgid "get configuration values via shell evaluation"
+msgstr ""
-#: cmdline/apt-get.cc
-msgid "Failed to fetch some archives."
-msgstr "無法取得某些套件檔。"
+#: cmdline/apt-config.cc
+msgid "show the active configuration setting"
+msgstr ""
#: cmdline/apt-get.cc
#, c-format
-msgid "Skipping unpack of already unpacked source in %s\n"
-msgstr "不解開，因原始碼已解開至 %s\n"
+msgid "Couldn't find package %s"
+msgstr "無法找到套件 %s"
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Unpack command '%s' failed.\n"
-msgstr "解開指令 '%s' 失敗。\n"
+#: cmdline/apt-get.cc cmdline/apt-mark.cc
+#, fuzzy, c-format
+msgid "%s set to automatically installed.\n"
+msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-get.cc
-#, c-format
-msgid "Check if the 'dpkg-dev' package is installed.\n"
-msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
+#: cmdline/apt-get.cc cmdline/apt-mark.cc
+msgid ""
+"This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' "
+"instead."
+msgstr ""
#: cmdline/apt-get.cc
-#, c-format
-msgid "Build command '%s' failed.\n"
-msgstr "編譯指令 '%s' 失敗。\n"
+msgid "Internal error, problem resolver broke stuff"
+msgstr "內部錯誤，問題排除器造成了損壞"
#: cmdline/apt-get.cc
-msgid "Must specify at least one package to check builddeps for"
-msgstr "å\9c¨æª¢æ\9f¥ç·¨è¯ç\9b¸ä¾\9dé\97\9cä¿\82æ\99\82å¿\85é \88è\87³å°\91æ\8c\87å®\9aä¸\80å\80\8bå¥\97件"
+msgid "Supported modules:"
+msgstr "å·²æ\94¯æ\8f´æ¨¡çµ\84ï¼\9a"
#: cmdline/apt-get.cc
-#, c-format
+#, fuzzy
msgid ""
-"No architecture information available for %s. See apt.conf(5) APT::"
-"Architectures for setup"
+"Usage: apt-get [options] command\n"
+" apt-get [options] install|remove pkg1 [pkg2 ...]\n"
+" apt-get [options] source pkg1 [pkg2 ...]\n"
+"\n"
+"apt-get is a command line interface for retrieval of packages\n"
+"and information about them from authenticated sources and\n"
+"for installation, upgrade and removal of packages together\n"
+"with their dependencies.\n"
msgstr ""
+"用法：apt-get [選項] 指令\n"
+" apt-get [選項] install|remove 套件1 [套件2 ...]\n"
+" apt-get [選項] source 套件1 [套件2 ...]\n"
+"\n"
+"apt-get 是一個用來下載和安裝套件的簡易命令列界面。\n"
+"最常用指令是 update 和 install。\n"
#: cmdline/apt-get.cc
-#, c-format
-msgid "Note, using directory '%s' to get the build dependencies\n"
-msgstr ""
+msgid "Retrieve new lists of packages"
+msgstr "取得新的套件列表"
#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid "Note, using file '%s' to get the build dependencies\n"
-msgstr "無法處理編譯相依關係"
+msgid "Perform an upgrade"
+msgstr "進行升級"
#: cmdline/apt-get.cc
-#, c-format
-msgid "Unable to get build-dependency information for %s"
-msgstr "無法取得 %s 的編譯相依關係資訊"
+msgid "Install new packages (pkg is libc6 not libc6.deb)"
+msgstr "安裝新套件（套件名稱是 libc6 而不是 libc6.deb）"
#: cmdline/apt-get.cc
-#, c-format
-msgid "%s has no build depends.\n"
-msgstr "%s 沒有編譯相依關係。\n"
+msgid "Remove packages"
+msgstr "移除套件"
#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid ""
-"%s dependency for %s can't be satisfied because %s is not allowed on '%s' "
-"packages"
-msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+msgid "Remove packages and config files"
+msgstr "移除並清除套件"
#: cmdline/apt-get.cc
-#, c-format
-msgid ""
-"%s dependency for %s cannot be satisfied because the package %s cannot be "
-"found"
-msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+msgid "Distribution upgrade, see apt-get(8)"
+msgstr "發行版本升級，請參閱 apt-get(8)"
#: cmdline/apt-get.cc
-#, c-format
-msgid "Failed to satisfy %s dependency for %s: Installed package %s is too new"
-msgstr "無法滿足 %2$s 的相依關係 %1$s：已安裝的套件 %3$s 太新了"
+msgid "Follow dselect selections"
+msgstr "採用 dselect 的選項升級"
#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid ""
-"%s dependency for %s cannot be satisfied because candidate version of "
-"package %s can't satisfy version requirements"
-msgstr ""
-"無法滿足 %2$s 所要求的 %1$s 相依關係，因為套件 %3$s 沒有版本符合其版本需求"
+msgid "Configure build-dependencies for source packages"
+msgstr "為原始碼套件配置編譯相依關係"
#: cmdline/apt-get.cc
-#, fuzzy, c-format
-msgid ""
-"%s dependency for %s cannot be satisfied because package %s has no candidate "
-"version"
-msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
+msgid "Erase downloaded archive files"
+msgstr "刪除已下載的套件檔"
#: cmdline/apt-get.cc
-#, c-format
-msgid "Failed to satisfy %s dependency for %s: %s"
-msgstr "無法滿足 %2$s 的相依關係 %1$s：%3$s"
+msgid "Erase old downloaded archive files"
+msgstr "刪除已下載但已有新版本的套件檔"
#: cmdline/apt-get.cc
-#, c-format
-msgid "Build-dependencies for %s could not be satisfied."
-msgstr "無法滿足套件 %s 的編譯相依關係。"
+msgid "Verify that there are no broken dependencies"
+msgstr "檢查相依關係是否有問題"
#: cmdline/apt-get.cc
-msgid "Failed to process build dependencies"
-msgstr "無法處理編譯相依關係"
+msgid "Download source archives"
+msgstr "下載套件原始碼"
#: cmdline/apt-get.cc
-msgid "Supported modules:"
-msgstr "已支援模組："
+msgid "Download the binary package into the current directory"
+msgstr ""
#: cmdline/apt-get.cc
-#, fuzzy
-msgid ""
-"Usage: apt-get [options] command\n"
-" apt-get [options] install|remove pkg1 [pkg2 ...]\n"
-" apt-get [options] source pkg1 [pkg2 ...]\n"
-"\n"
-"apt-get is a simple command line interface for downloading and\n"
-"installing packages. The most frequently used commands are update\n"
-"and install.\n"
-"\n"
-"Commands:\n"
-" update - Retrieve new lists of packages\n"
-" upgrade - Perform an upgrade\n"
-" install - Install new packages (pkg is libc6 not libc6.deb)\n"
-" remove - Remove packages\n"
-" autoremove - Remove automatically all unused packages\n"
-" purge - Remove packages and config files\n"
-" source - Download source archives\n"
-" build-dep - Configure build-dependencies for source packages\n"
-" dist-upgrade - Distribution upgrade, see apt-get(8)\n"
-" dselect-upgrade - Follow dselect selections\n"
-" clean - Erase downloaded archive files\n"
-" autoclean - Erase old downloaded archive files\n"
-" check - Verify that there are no broken dependencies\n"
-" changelog - Download and display the changelog for the given package\n"
-" download - Download the binary package into the current directory\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -q Loggable output - no progress indicator\n"
-" -qq No output except for errors\n"
-" -d Download only - do NOT install or unpack archives\n"
-" -s No-act. Perform ordering simulation\n"
-" -y Assume Yes to all queries and do not prompt\n"
-" -f Attempt to correct a system with broken dependencies in place\n"
-" -m Attempt to continue if archives are unlocatable\n"
-" -u Show a list of upgraded packages as well\n"
-" -b Build the source package after fetching it\n"
-" -V Show verbose version numbers\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-"See the apt-get(8), sources.list(5) and apt.conf(5) manual\n"
-"pages for more information and options.\n"
-" This APT has Super Cow Powers.\n"
+msgid "Download and display the changelog for the given package"
msgstr ""
-"用法：apt-get [選項] 指令\n"
-" apt-get [選項] install|remove 套件1 [套件2 ...]\n"
-" apt-get [選項] source 套件1 [套件2 ...]\n"
-"\n"
-"apt-get 是一個用來下載和安裝套件的簡易命令列界面。\n"
-"最常用指令是 update 和 install。\n"
-"\n"
-"指令:\n"
-" update - 取得新的套件列表\n"
-" upgrade - 進行升級\n"
-" install - 安裝新套件（套件名稱是 libc6 而不是 libc6.deb）\n"
-" remove - 移除套件\n"
-" autoremove - 自動移除所有不再使用的套件\n"
-" purge - 移除並清除套件\n"
-" source - 下載套件原始碼\n"
-" build-dep - 為原始碼套件配置編譯相依關係\n"
-" dist-upgrade - 發行版本升級，請參閱 apt-get(8)\n"
-" dselect-upgrade - 採用 dselect 的選項升級\n"
-" clean - 刪除已下載的套件檔\n"
-" auto-clean - 刪除已下載但已有新版本的套件檔\n"
-" check - 檢查相依關係是否有問題\n"
-"\n"
-"選項：\n"
-" -h 本求助訊息。\n"
-" -q 讓輸出可作為記錄檔之用 - 不顯示進度\n"
-" -qq 除了錯誤外，不顯示其它資訊\n"
-" -d 僅下載 - 【不】安裝或解開套件檔\n"
-" -s 不實際進行。只是模擬執行指令\n"
-" -y 對所有詢問都回答 Yes，同時不會有任何提示\n"
-" -f 嘗試修正系統上損毀的套件相依關係\n"
-" -m 當有套件檔無法找到時，仍試著繼續進行\n"
-" -u 顯示已升級的套件列表\n"
-" -b 在取得套件原始碼後進行編譯\n"
-" -V 顯示詳盡的版本號碼\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-"請參閱 apt-get(8)、sources.list(5) 及 apt.conf(5) 的使用手冊\n"
-"以取得更多資訊和選項。\n"
-" 該 APT 有著超級牛力。\n"
#: cmdline/apt-helper.cc
msgid "Need one URL as argument"
"Usage: apt-helper [options] command\n"
" apt-helper [options] download-file uri target-path\n"
"\n"
-"apt-helper is a internal helper for apt\n"
-"\n"
-"Commands:\n"
-" download-file - download the given uri to the target-path\n"
-" srv-lookup - lookup a SRV record (e.g. _http._tcp.ftp.debian.org)\n"
-" auto-detect-proxy - detect proxy using apt.conf\n"
-"\n"
-" This APT helper has Super Meep Powers.\n"
+"apt-helper bundles a variety of commands for shell scripts to use\n"
+"e.g. the same proxy configuration or acquire system as APT would do.\n"
+msgstr ""
+
+#: cmdline/apt-helper.cc
+msgid "download the given uri to the target-path"
+msgstr ""
+
+#: cmdline/apt-helper.cc
+msgid "lookup a SRV record (e.g. _http._tcp.ftp.debian.org)"
+msgstr ""
+
+#: cmdline/apt-helper.cc
+msgid "detect proxy using apt.conf"
msgstr ""
#: cmdline/apt-mark.cc
msgid "%s was already not hold.\n"
msgstr "%s 已經是最新版本了。\n"
-#: cmdline/apt-mark.cc apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc
-#: apt-pkg/deb/dpkgpm.cc
-#, c-format
-msgid "Waited for %s but it wasn't there"
-msgstr "等待 %s 但是它並不存在"
+#: cmdline/apt-mark.cc
+msgid "Executing dpkg failed. Are you root?"
+msgstr ""
#: cmdline/apt-mark.cc
#, fuzzy, c-format
msgstr "無法開啟 %s"
#: cmdline/apt-mark.cc
-msgid "Executing dpkg failed. Are you root?"
+#, c-format
+msgid "Selected %s for purge.\n"
+msgstr ""
+
+#: cmdline/apt-mark.cc
+#, c-format
+msgid "Selected %s for removal.\n"
+msgstr ""
+
+#: cmdline/apt-mark.cc
+#, c-format
+msgid "Selected %s for installation.\n"
msgstr ""
#: cmdline/apt-mark.cc
"Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n"
"\n"
"apt-mark is a simple command line interface for marking packages\n"
-"as manually or automatically installed. It can also list marks.\n"
-"\n"
-"Commands:\n"
-" auto - Mark the given packages as automatically installed\n"
-" manual - Mark the given packages as manually installed\n"
-" hold - Mark a package as held back\n"
-" unhold - Unset a package set as held back\n"
-" showauto - Print the list of automatically installed packages\n"
-" showmanual - Print the list of manually installed packages\n"
-" showhold - Print the list of package on hold\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -q Loggable output - no progress indicator\n"
-" -qq No output except for errors\n"
-" -s No-act. Just prints what would be done.\n"
-" -f read/write auto/manual marking in the given file\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-"See the apt-mark(8) and apt.conf(5) manual pages for more information."
+"as manually or automatically installed. It is also possible to\n"
+"manipulate the dpkg(1) selection states of packages with it.\n"
+"It can also list all packages with or without a certain marking.\n"
+msgstr ""
+
+#: cmdline/apt-mark.cc
+#, fuzzy
+msgid "Mark the given packages as automatically installed"
+msgstr "%s 被設定為手動安裝。\n"
+
+#: cmdline/apt-mark.cc
+#, fuzzy
+msgid "Mark the given packages as manually installed"
+msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
+
+#: cmdline/apt-mark.cc
+msgid "Mark a package as held back"
+msgstr ""
+
+#: cmdline/apt-mark.cc
+msgid "Unset a package set as held back"
+msgstr ""
+
+#: cmdline/apt-mark.cc
+#, fuzzy
+msgid "Print the list of automatically installed packages"
+msgstr "%s 被設定為手動安裝。\n"
+
+#: cmdline/apt-mark.cc
+#, fuzzy
+msgid "Print the list of manually installed packages"
+msgstr "%s 被設定為手動安裝。\n"
+
+#: cmdline/apt-mark.cc
+msgid "Print the list of package on hold"
msgstr ""
#: methods/cdrom.cc
msgstr "整合現有的資料"
#: cmdline/apt-extracttemplates.cc
+#, fuzzy
msgid ""
"Usage: apt-extracttemplates file1 [file2 ...]\n"
"\n"
-"apt-extracttemplates is a tool to extract config and template info\n"
-"from debian packages\n"
-"\n"
-"Options:\n"
-" -h This help text\n"
-" -t Set the temp dir\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+"apt-extracttemplates is used to extract config and template files\n"
+"from debian packages. It is used mainly by debconf(1) to prompt for\n"
+"configuration questions before installation of packages.\n"
msgstr ""
"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
"\n"
"Usage: apt-internal-solver\n"
"\n"
"apt-internal-solver is an interface to use the current internal\n"
-"like an external resolver for the APT family for debugging or alike\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -q Loggable output - no progress indicator\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+"like an external resolver for the APT family for debugging or alike.\n"
msgstr ""
"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
"\n"
msgid ""
"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
"\n"
-"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n"
-"to indicate what kind of file it is.\n"
-"\n"
-"Options:\n"
-" -h This help text\n"
-" -s Use source file sorting\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+"apt-sortpkgs is a simple tool to sort package information files.\n"
+"It sorts by default by binary package information, but the -s option\n"
+"can be used to switch to source package ordering instead.\n"
msgstr ""
-"用法：apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
-"\n"
-"apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
-"\n"
-"選項：\n"
-" -h 本幫助訊息。\n"
-" -s 根據原始檔排序\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
#: ftparchive/apt-ftparchive.cc
msgid "Package extension list is too long"
msgstr "正在取得檔案 %li/%li"
#: apt-pkg/acquire-item.cc
-msgid "Use --allow-insecure-repositories to force the update"
+msgid ""
+"Updating such a repository securily is impossible and therefore disabled by "
+"default."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"Data from such a repository can not be authenticated and is therefore "
+"potentially dangerous to use."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"See apt-secure(8) manpage for repository creation and user configuration "
+"details."
msgstr ""
#: apt-pkg/acquire-item.cc apt-pkg/contrib/fileutl.cc
msgid "Conflicting distribution: %s (expected %s but got %s)"
msgstr "發行版本衝突：%s（應當是 %s 但卻得到 %s）"
+#. No Release file was present, or verification failed, so fall
+#. back to queueing Packages files without verification
+#. only allow going further if the users explicitely wants it
#: apt-pkg/acquire-item.cc
-#, c-format
-msgid ""
-"The data from '%s' is not signed. Packages from that repository can not be "
-"authenticated."
-msgstr ""
+#, fuzzy, c-format
+msgid "The repository '%s' is not signed."
+msgstr "路徑 %s 已被抽換"
+#. No Release file was present so fall
+#. back to queueing Packages files without verification
+#. only allow going further if the users explicitely wants it
#: apt-pkg/acquire-item.cc
-#, c-format
-msgid ""
-"The repository '%s' does not have a Release file. This is deprecated, please "
-"contact the owner of the repository."
-msgstr ""
+#, fuzzy, c-format
+msgid "The repository '%s' does not have a Release file."
+msgstr "路徑 %s 已被抽換"
#: apt-pkg/acquire-item.cc
#, fuzzy, c-format
"Ignoring file '%s' in directory '%s' as it has an invalid filename extension"
msgstr ""
+#: apt-pkg/contrib/fileutl.cc apt-pkg/contrib/gpgv.cc apt-pkg/deb/debsystem.cc
+#, c-format
+msgid "Waited for %s but it wasn't there"
+msgstr "等待 %s 但是它並不存在"
+
#: apt-pkg/contrib/fileutl.cc
#, c-format
msgid "Sub-process %s received a segmentation fault."
msgid "Type '%s' is not known on stanza %u in source list %s"
msgstr "未知的類型 '%1$s'，位於在來源列表 %3$s 中的第 %2$u 行"
+#: apt-pkg/sourcelist.cc
+#, c-format
+msgid "Unsupported file %s given on commandline"
+msgstr ""
+
#: apt-pkg/srcrecords.cc
msgid "You must put some 'source' URIs in your sources.list"
msgstr "在 sources.list 中必須包含一些 'source' URI"
msgid "Calculating upgrade"
msgstr "籌備升級中"
+#~ msgid ""
+#~ "Usage: apt-cache [options] command\n"
+#~ " apt-cache [options] show pkg1 [pkg2 ...]\n"
+#~ "\n"
+#~ "apt-cache is a low-level tool used to query information\n"
+#~ "from APT's binary cache files\n"
+#~ msgstr ""
+#~ "用法：apt-cache [選項] 指令\n"
+#~ " apt-cache [選項] show 套件1 [套件2 ...]\n"
+#~ "\n"
+#~ "apt-cache 是一個低階的工具，可用來操作 APT 的二進制快取檔，也可用來\n"
+#~ "查詢那些檔案中的相關訊息\n"
+
+#~ msgid ""
+#~ "Options:\n"
+#~ " -h This help text.\n"
+#~ " -p=? The package cache.\n"
+#~ " -s=? The source cache.\n"
+#~ " -q Disable progress indicator.\n"
+#~ " -i Show only important deps for the unmet command.\n"
+#~ " -c=? Read this configuration file\n"
+#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+#~ "See the apt-cache(8) and apt.conf(5) manual pages for more information.\n"
+#~ msgstr ""
+#~ "選項：\n"
+#~ " -h 本幫助訊息。\n"
+#~ " -p=? 套件的快取。\n"
+#~ " -s=? 原始碼的快取。\n"
+#~ " -q 關閉進度顯示。\n"
+#~ " -i 僅為 unmet 指令顯示重要的相依關係。\n"
+#~ " -c=? 讀取指定的設定檔\n"
+#~ " -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+#~ "請參閱 apt-cache(8) 及 apt.conf(5) 參考手冊以取得更多資訊。\n"
+
+#~ msgid ""
+#~ "Usage: apt-config [options] command\n"
+#~ "\n"
+#~ "apt-config is a simple tool to read the APT config file\n"
+#~ msgstr ""
+#~ "用法：apt-config [選項] 指令\n"
+#~ "\n"
+#~ "apt-config 是一個用於讀取 APT 設定檔的簡單工具\n"
+
+#~ msgid ""
+#~ "Options:\n"
+#~ " -h This help text.\n"
+#~ " -c=? Read this configuration file\n"
+#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+#~ msgstr ""
+#~ "選項：\n"
+#~ " -h 本幫助訊息。\n"
+#~ " -c=? 讀取指定的設定檔\n"
+#~ " -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#~ msgid ""
+#~ "Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
+#~ "\n"
+#~ "apt-sortpkgs is a simple tool to sort package files. The -s option is "
+#~ "used\n"
+#~ "to indicate what kind of file it is.\n"
+#~ "\n"
+#~ "Options:\n"
+#~ " -h This help text\n"
+#~ " -s Use source file sorting\n"
+#~ " -c=? Read this configuration file\n"
+#~ " -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+#~ msgstr ""
+#~ "用法：apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
+#~ "\n"
+#~ "apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
+#~ "\n"
+#~ "選項：\n"
+#~ " -h 本幫助訊息。\n"
+#~ " -s 根據原始檔排序\n"
+#~ " -c=? 讀取指定的設定檔\n"
+#~ " -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
#~ msgid "Child process failed"
#~ msgstr "子程序失敗"
projects / apt.git / blobdiff