+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the unstable/contrib area. If this line appears as "
+"well as the one in the previous example in <filename>sources.list</filename> "
+"a single FTP session will be used for both resource lines."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:1
+msgid ""
+"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+"directory, and uses only files found under "
+"<filename>unstable/binary-i386</filename> on i386 machines, "
+"<filename>unstable/binary-amd64</filename> on amd64, and so forth for other "
+"supported architectures. [Note this example only illustrates how to use the "
+"substitution variable; official debian archives are not structured like "
+"this] <placeholder type=\"literallayout\" id=\"0\"/> <placeholder "
+"type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:1
+msgid ""
+"Uses HTTP to get binary packages as well as sources from the stable, testing "
+"and unstable suites and the components main and contrib."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid ""
+"deb http://httpredir.debian.org/debian stable main contrib\n"
+"deb-src http://httpredir.debian.org/debian stable main contrib\n"
+"deb http://httpredir.debian.org/debian testing main contrib\n"
+"deb-src http://httpredir.debian.org/debian testing main contrib\n"
+"deb http://httpredir.debian.org/debian unstable main contrib\n"
+"deb-src http://httpredir.debian.org/debian unstable main contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:1
+#, no-wrap
+msgid ""
+"Types: deb deb-src\n"
+"URIs: http://httpredir.debian.org/debian\n"
+"Suites: stable testing unstable\n"
+"Components: main contrib\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:1
+msgid "&apt-get;, &apt-conf;"
+msgstr ""
+
+#. type: Content of: <refentry><refmeta><manvolnum>
+#: apt-extracttemplates.1.xml:1 apt-sortpkgs.1.xml:1 apt-ftparchive.1.xml:1
+msgid "1"
+msgstr ""
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-extracttemplates.1.xml:1
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:1
+msgid ""
+"<command>apt-extracttemplates</command> will take one or more Debian package "
+"files as input and write out (to a temporary directory) all associated "
+"config scripts and template files. For each passed in package that contains "
+"config scripts and templates, one line of output will be generated in the "
+"format:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:1
+msgid "package version template-file config-script"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:1
+msgid ""
+"template-file and config-script are written to the temporary directory "
+"specified by the <option>-t</option> or <option>--tempdir</option> "
+"(<literal>APT::ExtractTemplates::TempDir</literal>) directory, with "
+"filenames of the form <filename>package.template.XXXXXX</filename> and "
+"<filename>package.config.XXXXXX</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-extracttemplates.1.xml:1
+msgid ""
+"Temporary directory in which to write extracted <command>debconf</command> "
+"template files and config scripts. Configuration Item: "
+"<literal>APT::ExtractTemplates::TempDir</literal>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:1
+msgid ""
+"<command>apt-extracttemplates</command> returns zero on normal operation, "
+"decimal 100 on error."
+msgstr ""
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-sortpkgs.1.xml:1
+msgid "Utility to sort package index files"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml:1
+msgid ""
+"<command>apt-sortpkgs</command> will take an index file (source index or "
+"package index) and sort the records so that they are ordered by the package "
+"name. It will also sort the internal fields of each record according to the "
+"internal sorting rules."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml:1
+msgid "All output is sent to standard output; the input must be a seekable file."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-sortpkgs.1.xml:1
+msgid ""
+"Use source index field ordering. Configuration Item: "
+"<literal>APT::SortPkgs::Source</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml:1
+msgid ""
+"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
+"100 on error."
+msgstr ""
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-ftparchive.1.xml:1
+msgid "Utility to generate index files"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"<command>apt-ftparchive</command> is the command line tool that generates "
+"the index files that APT uses to access a distribution source. The index "
+"files should be generated on the origin site based on the content of that "
+"site."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
+"program, incorporating its entire functionality via the "
+"<literal>packages</literal> command. It also contains a contents file "
+"generator, <literal>contents</literal>, and an elaborate means to 'script' "
+"the generation process for a complete archive."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Internally <command>apt-ftparchive</command> can make use of binary "
+"databases to cache the contents of a .deb file and it does not rely on any "
+"external programs aside from &gzip;. When doing a full generate it "
+"automatically performs file-change checks and builds the desired compressed "
+"output files."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The packages command generates a package file from a directory tree. It "
+"takes the given directory and recursively searches it for .deb files, "
+"emitting a package record to stdout for each. This command is approximately "
+"equivalent to &dpkg-scanpackages;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1 apt-ftparchive.1.xml:1
+msgid "The option <option>--db</option> can be used to specify a binary caching DB."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>sources</literal> command generates a source index file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .dsc files, emitting a source record to stdout for each. This command is "
+"approximately equivalent to &dpkg-scansources;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"If an override file is specified then a source override file will be looked "
+"for with an extension of .src. The --source-override option can be used to "
+"change the source override file that will be used."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>contents</literal> command generates a contents file from a "
+"directory tree. It takes the given directory and recursively searches it for "
+".deb files, and reads the file list from each file. It then sorts and writes "
+"to stdout the list of files matched to packages. Directories are not written "
+"to the output. If multiple packages own the same file then each package is "
+"separated by a comma in the output."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>release</literal> command generates a Release file from a "
+"directory tree. It recursively searches the given directory for uncompressed "
+"<filename>Packages</filename> and <filename>Sources</filename> files and "
+"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
+"<command>lzma</command> as well as <filename>Release</filename> and "
+"<filename>md5sum.txt</filename> files by default "
+"(<literal>APT::FTPArchive::Release::Default-Patterns</literal>). Additional "
+"filename patterns can be added by listing them in "
+"<literal>APT::FTPArchive::Release::Patterns</literal>. It then writes to "
+"stdout a <filename>Release</filename> file containing (by default) an MD5, "
+"SHA1, SHA256 and SHA512 digest for each file."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Values for the additional metadata fields in the Release file are taken from "
+"the corresponding variables under "
+"<literal>APT::FTPArchive::Release</literal>, "
+"e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The supported "
+"fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"<literal>Suite</literal>, <literal>Version</literal>, "
+"<literal>Codename</literal>, <literal>Date</literal>, "
+"<literal>Valid-Until</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal>, <literal>Description</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>generate</literal> command is designed to be runnable from a "
+"cron script and builds indexes according to the given config file. The "
+"config language provides a flexible means of specifying which index files "
+"are built from which directories, as well as providing a simple means of "
+"maintaining the required settings."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>clean</literal> command tidies the databases used by the given "
+"configuration file by removing any records that are no longer necessary."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-ftparchive.1.xml:1
+msgid "The Generate Configuration"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>generate</literal> command uses a configuration file to "
+"describe the archives that are going to be generated. It follows the typical "
+"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. "
+"&apt-conf; contains a description of the syntax. Note that the generate "
+"configuration is parsed in sectional manner, but &apt-conf; is parsed in a "
+"tree manner. This only effects how the scope tag is handled."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml:1
+msgid "The generate configuration has four separate sections, each described below."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml:1
+msgid "<literal>Dir</literal> Section"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>Dir</literal> section defines the standard directories needed "
+"to locate the files required during the generation process. These "
+"directories are prepended certain relative paths defined in later sections "
+"to produce a complete an absolute path."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies the root of the FTP archive, in a standard Debian configuration "
+"this is the directory that contains the <filename>ls-LR</filename> and dist "
+"nodes."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid "Specifies the location of the override files."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid "Specifies the location of the cache files."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies the location of the file list files, if the "
+"<literal>FileList</literal> setting is used below."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml:1
+msgid "<literal>Default</literal> Section"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>Default</literal> section specifies default values, and "
+"settings that control the operation of the generator. Other sections may "
+"override these defaults with a per-section setting."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the default compression schemes to use for the package index files. It "
+"is a string that contains a space separated list of at least one of: '.' (no "
+"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
+"'. gzip'."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the default list of file extensions that are package files. This "
+"defaults to '.deb'."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Sources files."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the default list of file extensions that are source files. This "
+"defaults to '.dsc'."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Contents files."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Translation-en master file."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies the number of kilobytes to delink (and replace with hard links) "
+"per run. This is used in conjunction with the per-section "
+"<literal>External-Links</literal> setting."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies the mode of all created index files. It defaults to 0644. All "
+"index files are set to this mode with no regard to the umask."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1 apt-ftparchive.1.xml:1
+msgid ""
+"Specifies whether long descriptions should be included in the "
+"<filename>Packages</filename> file or split out into a master "
+"<filename>Translation-en</filename> file."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml:1
+msgid "<literal>TreeDefault</literal> Section"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets defaults specific to <literal>Tree</literal> sections. All of these "
+"variables are substitution variables and have the strings $(DIST), "
+"$(SECTION) and $(ARCH) replaced with their respective values."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the number of kilobytes of contents files that are generated each "
+"day. The contents files are round-robined so that over several days they "
+"will all be rebuilt."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Controls the number of days a contents file is allowed to be checked without "
+"changing. If this limit is passed the mtime of the contents file is "
+"updated. This case can occur if the package file is changed in such a way "
+"that does not result in a new contents file [override edit for instance]. A "
+"hold off is allowed in hopes that new .debs will be installed, requiring a "
+"new file anyhow. The default is 10, the units are in days."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the top of the .deb directory tree. Defaults to "
+"<filename>$(DIST)/$(SECTION)/binary-$(ARCH)/</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the top of the source package directory tree. Defaults to "
+"<filename>$(DIST)/$(SECTION)/source/</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the output Packages file. Defaults to "
+"<filename>$(DIST)/$(SECTION)/binary-$(ARCH)/Packages</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the output Sources file. Defaults to "
+"<filename>$(DIST)/$(SECTION)/source/Sources</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the output Translation-en master file with the long descriptions if "
+"they should be not included in the Packages file. Defaults to "
+"<filename>$(DIST)/$(SECTION)/i18n/Translation-en</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the path prefix that causes a symlink to be considered an internal link "
+"instead of an external link. Defaults to "
+"<filename>$(DIST)/$(SECTION)/</filename>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the output Contents file. Defaults to "
+"<filename>$(DIST)/$(SECTION)/Contents-$(ARCH)</filename>. If this setting "
+"causes multiple Packages files to map onto a single Contents file (as is the "
+"default) then <command>apt-ftparchive</command> will integrate those "
+"package files together automatically."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid "Sets header file to prepend to the contents output."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the binary cache database to use for this section. Multiple sections "
+"can share the same database."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies that instead of walking the directory tree, "
+"<command>apt-ftparchive</command> should read the list of files from the "
+"given file. Relative files names are prefixed with the archive directory."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Specifies that instead of walking the directory tree, "
+"<command>apt-ftparchive</command> should read the list of files from the "
+"given file. Relative files names are prefixed with the archive directory. "
+"This is used when processing source indexes."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml:1
+msgid "<literal>Tree</literal> Section"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>Tree</literal> section defines a standard Debian file tree "
+"which consists of a base directory, then multiple sections in that base "
+"directory and finally multiple Architectures in each section. The exact "
+"pathing used is defined by the <literal>Directory</literal> substitution "
+"variable."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"The <literal>Tree</literal> section takes a scope tag which sets the "
+"<literal>$(DIST)</literal> variable and defines the root of the tree (the "
+"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a "
+"setting such as <filename>dists/&stable-codename;</filename>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"All of the settings defined in the <literal>TreeDefault</literal> section "
+"can be used in a <literal>Tree</literal> section as well as three new "
+"variables."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt-ftparchive.1.xml:1
+#, no-wrap
+msgid ""
+"for i in Sections do \n"
+" for j in Architectures do\n"
+" Generate for DIST=scope SECTION=i ARCH=j\n"
+" "
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"When processing a <literal>Tree</literal> section "
+"<command>apt-ftparchive</command> performs an operation similar to: "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"This is a space separated list of sections which appear under the "
+"distribution; typically this is something like <literal>main contrib "
+"non-free</literal>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"This is a space separated list of all the architectures that appear under "
+"search section. The special architecture 'source' is used to indicate that "
+"this tree has a source archive."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml:1
+msgid ""
+"Sets the binary override file. The override file contains section, priority "
+"and maintainer address information."