#
msgid ""
msgstr ""
-"Project-Id-Version: apt\n"
+"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2014-07-10 10:52+0200\n"
+"POT-Creation-Date: 2016-08-30 22:20+0200\n"
"PO-Revision-Date: 2004-09-20 17:02+0000\n"
"Last-Translator: André Luís Lopes <andrelop@debian.org>\n"
"Language-Team: <debian-l10n-portuguese@lists.debian.org>\n"
"Content-Transfer-Encoding: 8bit\n"
#. type: Plain text
-#: apt.ent:7
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY apt-author.team \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:13
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY apt-qapage \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:24
+#: apt.ent
#, fuzzy, no-wrap
msgid ""
"<!-- Boiler plate Bug reporting section -->\n"
" </RefSect1>\n"
#. type: Plain text
-#: apt.ent:32
+#: apt.ent
#, fuzzy, no-wrap
msgid ""
"<!-- Boiler plate Author section -->\n"
" </RefSect1>\n"
#. type: Plain text
-#: apt.ent:42
+#: apt.ent
#, no-wrap
msgid ""
"<!-- Should be used within the option section of the text to\n"
msgstr ""
#. type: Plain text
-#: apt.ent:50
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:62
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:74
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:85
+#: apt.ent
#, fuzzy, no-wrap
msgid ""
"<!-- Should be used within the option section of the text to\n"
" </para>\n"
#. type: Plain text
-#: apt.ent:91
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-aptconf \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:97
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>/etc/apt/apt.conf.d/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:103
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-cachearchives \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:109
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>&cachedir;/archives/partial/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:119
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-preferences \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:125
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>/etc/apt/preferences.d/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:131
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-sourceslist \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:137
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>/etc/apt/sources.list.d/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:144
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-statelists \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:150
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>&statedir;/lists/partial/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:156
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-trustedgpg \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:163
+#: apt.ent
#, no-wrap
msgid ""
" <varlistentry><term><filename>/etc/apt/trusted.gpg.d/</filename></term>\n"
msgstr ""
#. type: Plain text
-#: apt.ent:171
+#: apt.ent
#, no-wrap
msgid ""
"<!ENTITY file-extended_states \"\n"
msgstr ""
#. type: Plain text
-#: apt.ent:175
+#: apt.ent
#, no-wrap
msgid ""
"<!-- TRANSLATOR: This is the section header for the following paragraphs - comparable\n"
msgstr "<!ENTITY translation-title \"TRADUÇÃO\">\n"
#. type: Plain text
-#: apt.ent:184
+#: apt.ent
#, no-wrap
msgid ""
"<!-- TRANSLATOR: This is a placeholder. You should write here who has contributed\n"
"\">\n"
#. type: Plain text
-#: apt.ent:195
+#: apt.ent
#, no-wrap
msgid ""
"<!-- TRANSLATOR: As a translation is allowed to have 20% of untranslated/fuzzy strings\n"
msgstr ""
#. type: Plain text
-#: apt.ent:198
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in -o=config_string e.g. -o=Debug::"
"pkgProblemResolver=1 --> <!ENTITY synopsis-config-string \"config_string\">"
msgstr ""
#. type: Plain text
-#: apt.ent:201
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in -c=config_file e.g. -c=./apt.conf --> <!ENTITY "
"synopsis-config-file \"config_file\">"
msgstr ""
#. type: Plain text
-#: apt.ent:204
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in -t=target_release or pkg/target_release e.g. -"
"t=squeeze apt/experimental --> <!ENTITY synopsis-target-release "
msgstr ""
#. type: Plain text
-#: apt.ent:207
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in -a=architecture e.g. -a=armel --> <!ENTITY "
"synopsis-architecture \"architecture\">"
msgstr ""
#. type: Plain text
-#: apt.ent:210
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-get install pkg e.g. apt-get install awesome "
"--> <!ENTITY synopsis-pkg \"pkg\">"
msgstr ""
#. type: Plain text
-#: apt.ent:213
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in pkg=pkg_version_number e.g. apt=0.8.15 --> <!"
"ENTITY synopsis-pkg-ver-number \"pkg_version_number\">"
msgstr ""
#. type: Plain text
-#: apt.ent:216
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-cache pkgnames prefix e.g. apt-cache "
"pkgnames apt --> <!ENTITY synopsis-prefix \"prefix\">"
msgstr ""
#. type: Plain text
-#: apt.ent:219
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-cache search regex e.g. apt-cache search "
"awesome --> <!ENTITY synopsis-regex \"regex\">"
msgstr ""
#. type: Plain text
-#: apt.ent:222
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-cdrom -d=cdrom_mount_point e.g. apt-cdrom -"
"d=/media/cdrom --> <!ENTITY synopsis-cdrom-mount \"cdrom_mount_point\">"
msgstr ""
#. type: Plain text
-#: apt.ent:225
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-extracttemplates -t=temporary_directory e.g. "
"apt-extracttemplates -t=/tmp --> <!ENTITY synopsis-tmp-directory "
msgstr ""
#. type: Plain text
-#: apt.ent:228
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-extracttemplates filename --> <!ENTITY "
"synopsis-filename \"filename\">"
msgstr ""
#. type: Plain text
-#: apt.ent:231
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as parameter for apt-ftparchive e.g. apt-ftparchive "
"packages path override-file pathprefix --> <!ENTITY synopsis-path \"path\">"
msgstr ""
#. type: Plain text
-#: apt.ent:234
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as parameter for apt-ftparchive e.g. apt-ftparchive "
"packages path override-file pathprefix --> <!ENTITY synopsis-override "
msgstr ""
#. type: Plain text
-#: apt.ent:237
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as parameter for apt-ftparchive e.g. apt-ftparchive "
"packages path override-file pathprefix --> <!ENTITY synopsis-pathprefix "
msgstr ""
#. type: Plain text
-#: apt.ent:240
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as parameter for apt-ftparchive e.g. apt-ftparchive "
"generate section --> <!ENTITY synopsis-section \"section\">"
msgstr ""
#. type: Plain text
-#: apt.ent:243
+#: apt.ent
msgid ""
"<!-- TRANSLATOR: used as in apt-key export keyid e.g. apt-key export "
"473041FA --> <!ENTITY synopsis-keyid \"keyid\">"
msgstr ""
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt.8.xml:25 apt-get.8.xml:28 apt-cache.8.xml:28 apt-key.8.xml:27
-#: apt-mark.8.xml:28 apt-secure.8.xml:27 apt-cdrom.8.xml:27
-#: apt-config.8.xml:28
+#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
+#: apt-secure.8.xml apt-cdrom.8.xml apt-config.8.xml
msgid "8"
msgstr ""
#. type: Content of: <refentry><refmeta><refmiscinfo>
-#: apt.8.xml:26 apt-get.8.xml:29 apt-cache.8.xml:29 apt-key.8.xml:28
-#: apt-mark.8.xml:29 apt-secure.8.xml:28 apt-cdrom.8.xml:28
-#: apt-config.8.xml:29 apt.conf.5.xml:34 apt_preferences.5.xml:28
-#: sources.list.5.xml:29 apt-extracttemplates.1.xml:29 apt-sortpkgs.1.xml:29
-#: apt-ftparchive.1.xml:29
+#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
+#: apt-secure.8.xml apt-cdrom.8.xml apt-config.8.xml apt.conf.5.xml
+#: apt_preferences.5.xml sources.list.5.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
msgid "APT"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt.8.xml:32
+#: apt.8.xml
msgid "command-line interface"
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:37 apt-get.8.xml:40 apt-cache.8.xml:40 apt-key.8.xml:39
-#: apt-mark.8.xml:40 apt-secure.8.xml:52 apt-cdrom.8.xml:39
-#: apt-config.8.xml:40 apt.conf.5.xml:43 apt_preferences.5.xml:38
-#: sources.list.5.xml:38 apt-extracttemplates.1.xml:40 apt-sortpkgs.1.xml:40
-#: apt-ftparchive.1.xml:40
+#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
+#: apt-secure.8.xml apt-cdrom.8.xml apt-config.8.xml apt.conf.5.xml
+#: apt_preferences.5.xml sources.list.5.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
#, fuzzy
msgid "Description"
msgstr "Descrição"
#. type: Content of: <refentry><refsect1><para>
-#: apt.8.xml:38
+#: apt.8.xml
msgid ""
-"<command>apt</command> (Advanced Package Tool) is the command-line tool for "
-"handling packages. It provides a commandline interface for the package "
-"management of the system. See also &apt-get; and &apt-cache; for more low-"
-"level command options."
+"<command>apt</command> provides a high-level commandline interface for the "
+"package management system. It is intended as an end user interface and "
+"enables some options better suited for interactive usage by default compared "
+"to more specialized APT tools like &apt-get; and &apt-cache;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml
+msgid ""
+"Much like <command>apt</command> itself, its manpage is intended as an end "
+"user interface and as such only mentions the most used commands and options "
+"partly to not duplicate information in multiple places and partly to avoid "
+"overwhelming readers with a cornucopia of options and details."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid "(&apt-get;)"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:47
+#: apt.8.xml
msgid ""
-"<literal>list</literal> is used to display a list of packages. It supports "
-"shell pattern for matching package names and the following options: "
-"<option>--installed</option>, <option>--upgradable</option>, <option>--all-"
-"versions</option> are supported."
+"<option>update</option> is used to download package information from all "
+"configured sources. Other commands operate on this data to e.g. perform "
+"package upgrades or search in and display details about all packages "
+"available for installation."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:58
+#: apt.8.xml
msgid ""
-"<literal>search</literal> searches for the given term(s) and display "
-"matching packages."
+"<option>upgrade</option> is used to install available upgrades of all "
+"packages currently installed on the system from the sources configured via "
+"&sources-list;. New packages will be installed if required to statisfy "
+"dependencies, but existing packages will never be removed. If an upgrade for "
+"a package requires the remove of an installed package the upgrade for this "
+"package isn't performed."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:64
+#: apt.8.xml
msgid ""
-"<literal>show</literal> shows the package information for the given "
-"package(s)."
+"<literal>full-upgrade</literal> performs the function of upgrade but will "
+"remove currently installed packages if this is needed to upgrade the system "
+"as a whole."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml apt-key.8.xml
+msgid ","
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:71
+#: apt.8.xml
msgid ""
-"<literal>install</literal> is followed by one or more package names desired "
-"for installation or upgrading."
+"Performs the requested action on one or more packages specified via ®ex;, "
+"&glob; or exact match. The requested action can be overridden for specific "
+"packages by append a plus (+) to the package name to install this package or "
+"a minus (-) to remove it."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:75 apt-get.8.xml:118
+#: apt.8.xml
msgid ""
"A specific version of a package can be selected for installation by "
-"following the package name with an equals and the version of the package to "
-"select. This will cause that version to be located and selected for install. "
-"Alternatively a specific distribution can be selected by following the "
-"package name with a slash and the version of the distribution or the Archive "
-"name (stable, testing, unstable)."
+"following the package name with an equals (=) and the version of the package "
+"to select. Alternatively the version from a specific release can be selected "
+"by following the package name with a forward slash (/) and codename (&debian-"
+"stable-codename;, &debian-testing-codename;, sid …) or suite name (stable, "
+"testing, unstable). This will also select versions from this release for "
+"dependencies of this package if needed to satisfy the request."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:85 apt-get.8.xml:153
+#: apt.8.xml
msgid ""
-"<literal>remove</literal> is identical to <literal>install</literal> except "
-"that packages are removed instead of installed. Note that removing a package "
-"leaves its configuration files on the system. If a plus sign is appended to "
-"the package name (with no intervening space), the identified package will be "
-"installed instead of removed."
+"Removing a package removes all packaged data, but leaves usually small "
+"(modified) user configuration files behind, in case the remove was an "
+"accident. Just issuing an installation request for the accidentally removed "
+"package will restore its function as before in that case. On the other hand "
+"you can get rid of these leftovers by calling <command>purge</command> even "
+"on already removed packages. Note that this does not affect any data or "
+"configuration stored in your home directory."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:93
+#: apt.8.xml
msgid ""
-"<literal>edit-sources</literal> lets you edit your sources.list file and "
-"provides basic sanity checks."
+"<literal>autoremove</literal> is used to remove packages that were "
+"automatically installed to satisfy dependencies for other packages and are "
+"now no longer needed as dependencies changed or the package(s) needing them "
+"were removed in the meantime."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:99
+#: apt.8.xml
msgid ""
-"<literal>update</literal> is used to resynchronize the package index files "
-"from their sources."
+"You should check that the list does not include applications you have grown "
+"to like even though they were once installed just as a dependency of another "
+"package. You can mark such a package as manually installed by using &apt-"
+"mark;. Packages which you have installed explicitly via <command>install</"
+"command> are also never proposed for automatic removal."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+#, fuzzy
+msgid "(&apt-cache;)"
msgstr ""
+"&apt-docinfo;\n"
+"\n"
+" "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:105
+#: apt.8.xml
msgid ""
-"<literal>upgrade</literal> is used to install the newest versions of all "
-"packages currently installed on the system from the sources enumerated in "
-"<filename>/etc/apt/sources.list</filename>. New package will be installed, "
-"but existing package will never removed."
+"<option>search</option> can be used to search for the given ®ex; term(s) "
+"in the list of available packages and display matches. This can e.g. be "
+"useful if you are looking for packages having a specific feature. If you "
+"are looking for a package including a specific file try &apt-file;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.8.xml:114
+#: apt.8.xml
msgid ""
-"<literal>full-upgrade</literal> performs the function of upgrade but may "
-"also remove installed packages if that is required in order to resolve a "
-"package conflict."
+"Show information about the given package(s) including its dependencies, "
+"installation and download size, sources the package is available from, the "
+"description of the packages content and much more. It can e.g. be helpful to "
+"look at this information before allowing &apt; to remove a package or while "
+"searching for new packages to install."
msgstr ""
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:124 apt-get.8.xml:257 apt-cache.8.xml:250 apt-mark.8.xml:110
-#: apt-config.8.xml:86 apt-extracttemplates.1.xml:54 apt-sortpkgs.1.xml:50
-#: apt-ftparchive.1.xml:506
-msgid "options"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.8.xml
+msgid "(work-in-progress)"
msgstr ""
-#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:134
-msgid "Script usage"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
+msgid ""
+"<option>list</option> is somewhat similar to <command>dpkg-query --list</"
+"command> in that it can display a list of packages satisfying certain "
+"criteria. It supports &glob; patterns for matching package names as well as "
+"options to list installed (<option>--installed</option>), upgradeable "
+"(<option>--upgradeable</option>) or all available (<option>--all-versions</"
+"option>) versions."
msgstr ""
-#. type: Content of: <refentry><refsect1><para>
-#: apt.8.xml:136
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml
msgid ""
-"The &apt; commandline is designed as a end-user tool and it may change the "
-"output between versions. While it tries to not break backward compatibility "
-"there is no guarantee for it either. All features of &apt; are available in "
-"&apt-cache; and &apt-get; via APT options. Please prefer using these "
-"commands in your scripts."
+"<literal>edit-sources</literal> lets you edit your &sources-list; files in "
+"your preferred texteditor while also providing basic sanity checks."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:144
-msgid "Differences to &apt-get;"
+#: apt.8.xml
+msgid "Script Usage and Differences from Other APT Tools"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.8.xml:145
+#: apt.8.xml
msgid ""
-"The <command>apt</command> command is meant to be pleasant for end users and "
-"does not need to be backward compatible like &apt-get;. Therefore some "
-"options are different:"
+"The &apt; commandline is designed as an end-user tool and it may change "
+"behavior between versions. While it tries not to break backward "
+"compatibility this is not guaranteed either if a change seems beneficial for "
+"interactive use."
msgstr ""
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml:151
-#, fuzzy
-msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
-msgstr "a linha <literal>Package:</literal>"
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml:155
-#, fuzzy
-msgid "The option <literal>APT::Color</literal> is enabled."
-msgstr "a linha <literal>Component:</literal>"
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml:159
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml
msgid ""
-"A new <literal>list</literal> command is available similar to <literal>dpkg "
-"--list</literal>."
+"All features of &apt; are available in dedicated APT tools like &apt-get; "
+"and &apt-cache; as well. &apt; just changes the default value of some "
+"options (see &apt-conf; and specifically the Binary scope). So you should "
+"prefer using these commands (potentially with some additional options "
+"enabled) in your scripts as they keep backward compatibility as much as "
+"possible."
msgstr ""
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.8.xml:164
-#, fuzzy
-msgid ""
-"The option <literal>upgrade</literal> has <literal>--with-new-pkgs</literal> "
-"enabled by default."
-msgstr "a linha <literal>Archive:</literal>"
-
#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:174 apt-get.8.xml:558 apt-cache.8.xml:352 apt-key.8.xml:197
-#: apt-mark.8.xml:133 apt-secure.8.xml:193 apt-cdrom.8.xml:154
-#: apt-config.8.xml:111 apt.conf.5.xml:1228 apt_preferences.5.xml:707
-#: sources.list.5.xml:280 apt-extracttemplates.1.xml:72 apt-sortpkgs.1.xml:65
-#: apt-ftparchive.1.xml:609
+#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml
+#: apt-secure.8.xml apt-cdrom.8.xml apt-config.8.xml apt.conf.5.xml
+#: apt_preferences.5.xml sources.list.5.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
#, fuzzy
msgid "See Also"
msgstr "Consulte também"
#. type: Content of: <refentry><refsect1><para>
-#: apt.8.xml:175
+#: apt.8.xml
msgid ""
"&apt-get;, &apt-cache;, &sources-list;, &apt-conf;, &apt-config;, The APT "
"User's guide in &guidesdir;, &apt-preferences;, the APT Howto."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.8.xml:180 apt-get.8.xml:564 apt-cache.8.xml:357 apt-mark.8.xml:137
-#: apt-cdrom.8.xml:159 apt-config.8.xml:116 apt-extracttemplates.1.xml:76
-#: apt-sortpkgs.1.xml:69 apt-ftparchive.1.xml:613
+#: apt.8.xml apt-get.8.xml apt-cache.8.xml apt-mark.8.xml apt-cdrom.8.xml
+#: apt-config.8.xml apt-extracttemplates.1.xml apt-sortpkgs.1.xml
+#: apt-ftparchive.1.xml
msgid "Diagnostics"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.8.xml:181
+#: apt.8.xml
msgid ""
"<command>apt</command> returns zero on normal operation, decimal 100 on "
"error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-get.8.xml:35
+#: apt-get.8.xml
msgid "APT package handling utility -- command-line interface"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:41
+#: apt-get.8.xml
msgid ""
"<command>apt-get</command> is the command-line tool for handling packages, "
"and may be considered the user's \"back-end\" to other tools using the APT "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:46 apt-cache.8.xml:46 apt-cdrom.8.xml:53 apt-config.8.xml:46
-#: apt-ftparchive.1.xml:56
+#: apt-get.8.xml apt-cache.8.xml apt-cdrom.8.xml apt-config.8.xml
+#: apt-ftparchive.1.xml
msgid ""
"Unless the <option>-h</option>, or <option>--help</option> option is given, "
"one of the commands below must be present."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:51
+#: apt-get.8.xml
msgid ""
"<literal>update</literal> is used to resynchronize the package index files "
"from their sources. The indexes of available packages are fetched from the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:63
+#: apt-get.8.xml
msgid ""
"<literal>upgrade</literal> is used to install the newest versions of all "
"packages currently installed on the system from the sources enumerated in "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:76
+#: apt-get.8.xml
msgid ""
"<literal>dist-upgrade</literal> in addition to performing the function of "
"<literal>upgrade</literal>, also intelligently handles changing dependencies "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:89
+#: apt-get.8.xml
msgid ""
"<literal>dselect-upgrade</literal> is used in conjunction with the "
"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:100
+#: apt-get.8.xml
msgid ""
"<literal>install</literal> is followed by one or more packages desired for "
"installation or upgrading. Each package is a package name, not a fully "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:125
+#: apt-get.8.xml
+msgid ""
+"A specific version of a package can be selected for installation by "
+"following the package name with an equals and the version of the package to "
+"select. This will cause that version to be located and selected for install. "
+"Alternatively a specific distribution can be selected by following the "
+"package name with a slash and the version of the distribution or the Archive "
+"name (stable, testing, unstable)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
msgid ""
"Both of the version selection mechanisms can downgrade packages and must be "
"used with care."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:128
+#: apt-get.8.xml
msgid ""
"This is also the target to use if you want to upgrade one or more already-"
"installed packages without upgrading every package you have on your system. "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:139
+#: apt-get.8.xml
msgid ""
"Finally, the &apt-preferences; mechanism allows you to create an alternative "
"installation policy for individual packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:143
+#: apt-get.8.xml
msgid ""
"If no package matches the given expression and the expression contains one "
"of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:161
+#: apt-get.8.xml
+msgid ""
+"<literal>remove</literal> is identical to <literal>install</literal> except "
+"that packages are removed instead of installed. Note that removing a package "
+"leaves its configuration files on the system. If a plus sign is appended to "
+"the package name (with no intervening space), the identified package will be "
+"installed instead of removed."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
msgid ""
"<literal>purge</literal> is identical to <literal>remove</literal> except "
"that packages are removed and purged (any configuration files are deleted "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:166
+#: apt-get.8.xml
msgid ""
"<literal>source</literal> causes <command>apt-get</command> to fetch source "
"packages. APT will examine the available packages to decide which source "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:174
+#: apt-get.8.xml
msgid ""
"Source packages are tracked separately from binary packages via <literal>deb-"
"src</literal> lines in the &sources-list; file. This means that you will "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:180
+#: apt-get.8.xml
msgid ""
"If the <option>--compile</option> option is specified then the package will "
"be compiled to a binary .deb using <command>dpkg-buildpackage</command> for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:187
+#: apt-get.8.xml
msgid ""
"A specific source version can be retrieved by postfixing the source name "
"with an equals and then the version to fetch, similar to the mechanism used "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:193
+#: apt-get.8.xml
msgid ""
"Note that source packages are not installed and tracked in the "
"<command>dpkg</command> database like binary packages; they are simply "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:199
+#: apt-get.8.xml
msgid ""
"<literal>build-dep</literal> causes apt-get to install/remove packages in an "
"attempt to satisfy the build dependencies for a source package. By default "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:206
+#: apt-get.8.xml
msgid ""
"<literal>check</literal> is a diagnostic tool; it updates the package cache "
"and checks for broken dependencies."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:211
+#: apt-get.8.xml
msgid ""
"<literal>download</literal> will download the given binary package into the "
"current directory."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:217
+#: apt-get.8.xml
msgid ""
"<literal>clean</literal> clears out the local repository of retrieved "
"package files. It removes everything but the lock file from "
"partial/</filename>."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "(and the"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-get.8.xml
+msgid "alias since 1.1)"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:224
+#: apt-get.8.xml
msgid ""
"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the "
"local repository of retrieved package files. The difference is that it only "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:234
+#: apt-get.8.xml
msgid ""
"<literal>autoremove</literal> is used to remove packages that were "
"automatically installed to satisfy dependencies for other packages and are "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:239
+#: apt-get.8.xml
msgid ""
-"<literal>changelog</literal> downloads a package changelog and displays it "
-"through <command>sensible-pager</command>. The server name and base "
-"directory is defined in the <literal>APT::Changelogs::Server</literal> "
-"variable (e.g. <ulink url=\"http://packages.debian.org/changelogs\">packages."
-"debian.org/changelogs</ulink> for Debian or <ulink url=\"http://changelogs."
-"ubuntu.com/changelogs\">changelogs.ubuntu.com/changelogs</ulink> for "
-"Ubuntu). By default it displays the changelog for the version that is "
-"installed. However, you can specify the same options as for the "
-"<option>install</option> command."
+"<literal>changelog</literal> tries to download the changelog of a package "
+"and displays it through <command>sensible-pager</command>. By default it "
+"displays the changelog for the version that is installed. However, you can "
+"specify the same options as for the <option>install</option> command."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:262
+#: apt-get.8.xml
+msgid ""
+"Displays by default a deb822 formatted listing of information about all data "
+"files (aka index targets) <command>apt-get update</command> would download. "
+"Supports a <option>--format</option> option to modify the output format as "
+"well as accepts lines of the default output to filter the records by. The "
+"command is mainly used as an interface for external tools working with APT "
+"to get information as well as filenames for downloaded files so they can use "
+"them as well instead of downloading them again on their own. Detailed "
+"documentation is omitted here and can instead be found in the file &apt-"
+"acquire-additional-files; shipped by the <package>apt-doc</package> package."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-get.8.xml apt-cache.8.xml apt-config.8.xml apt-extracttemplates.1.xml
+#: apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "options"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
msgid ""
"Do not consider recommended packages as a dependency for installing. "
"Configuration Item: <literal>APT::Install-Recommends</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:267
+#: apt-get.8.xml
msgid ""
"Consider suggested packages as a dependency for installing. Configuration "
"Item: <literal>APT::Install-Suggests</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:272
+#: apt-get.8.xml
msgid ""
"Download only; package files are only retrieved, not unpacked or installed. "
"Configuration Item: <literal>APT::Get::Download-Only</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:277
+#: apt-get.8.xml
msgid ""
"Fix; attempt to correct a system with broken dependencies in place. This "
"option, when used with install/remove, can omit any packages to permit APT "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:292
+#: apt-get.8.xml
msgid ""
"Ignore missing packages; if packages cannot be retrieved or fail the "
"integrity check after retrieval (corrupted package files), hold back those "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:303
+#: apt-get.8.xml
msgid ""
"Disables downloading of packages. This is best used with <option>--ignore-"
"missing</option> to force APT to use only the .debs it has already "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:310
+#: apt-get.8.xml
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quiet up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:325
+#: apt-get.8.xml
msgid ""
-"No action; perform a simulation of events that would occur but do not "
-"actually change the system. Configuration Item: <literal>APT::Get::"
-"Simulate</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:329
-msgid ""
-"Simulated runs performed as a user will automatically deactivate locking "
-"(<literal>Debug::NoLocking</literal>), and if the option <literal>APT::Get::"
-"Show-User-Simulation-Note</literal> is set (as it is by default) a notice "
-"will also be displayed indicating that this is only a simulation. Runs "
-"performed as root do not trigger either NoLocking or the notice - superusers "
-"should know what they are doing without further warnings from <literal>apt-"
-"get</literal>."
+"No action; perform a simulation of events that would occur based on the "
+"current system state but do not actually change the system. Locking will be "
+"disabled (<option>Debug::NoLocking</option>) so the system state could "
+"change while <command>apt-get</command> is running. Simulations can also be "
+"executed by non-root users which might not have read access to all apt "
+"configuration distorting the simulation. A notice expressing this warning "
+"is also shown by default for non-root users (<option>APT::Get::Show-User-"
+"Simulation-Note</option>). Configuration Item: <literal>APT::Get::Simulate</"
+"literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:337
+#: apt-get.8.xml
msgid ""
"Simulated runs print out a series of lines, each representing a "
"<command>dpkg</command> operation: configure (<literal>Conf</literal>), "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:345
+#: apt-get.8.xml
msgid ""
"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run "
"non-interactively. If an undesirable situation, such as changing a held "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:353
+#: apt-get.8.xml
msgid ""
"Automatic \"no\" to all prompts. Configuration Item: <literal>APT::Get::"
"Assume-No</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:358
+#: apt-get.8.xml
msgid ""
-"Show upgraded packages; print out a list of all packages that are to be "
-"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
+"Do not show a list of all packages that are to be upgraded. Configuration "
+"Item: <literal>APT::Get::Show-Upgraded</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:364
+#: apt-get.8.xml
msgid ""
"Show full versions for upgraded and installed packages. Configuration Item: "
"<literal>APT::Get::Show-Versions</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:370
+#: apt-get.8.xml
msgid ""
"This option controls the architecture packages are built for by <command>apt-"
"get source --compile</command> and how cross-builddependencies are "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:380
+#: apt-get.8.xml
msgid ""
"This option controls the activated build profiles for which a source package "
"is built by <command>apt-get source --compile</command> and how build "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:391
+#: apt-get.8.xml
msgid ""
"Compile source packages after downloading them. Configuration Item: "
"<literal>APT::Get::Compile</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:396
+#: apt-get.8.xml
msgid ""
"Ignore package holds; this causes <command>apt-get</command> to ignore a "
"hold placed on a package. This may be useful in conjunction with "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:403
+#: apt-get.8.xml
msgid ""
"Allow installing new packages when used in conjunction with "
"<literal>upgrade</literal>. This is useful if the update of a installed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:415
+#: apt-get.8.xml
msgid ""
"Do not upgrade packages; when used in conjunction with <literal>install</"
"literal>, <literal>no-upgrade</literal> will prevent packages on the command "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:422
+#: apt-get.8.xml
msgid ""
"Do not install new packages; when used in conjunction with <literal>install</"
"literal>, <literal>only-upgrade</literal> will install upgrades for already "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:430
+#: apt-get.8.xml
+msgid ""
+"This is a dangerous option that will cause apt to continue without prompting "
+"if it is doing downgrades. It should not be used except in very special "
+"situations. Using it can potentially destroy your system! Configuration "
+"Item: <literal>APT::Get::allow-downgrades</literal>. Introduced in APT 1.1."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Force yes; this is a dangerous option that will cause apt to continue "
+"without prompting if it is removing essentials. It should not be used except "
+"in very special situations. Using it can potentially destroy your system! "
+"Configuration Item: <literal>APT::Get::allow-remove-essential</literal>. "
+"Introduced in APT 1.1."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Force yes; this is a dangerous option that will cause apt to continue "
+"without prompting if it is changing held packages. It should not be used "
+"except in very special situations. Using it can potentially destroy your "
+"system! Configuration Item: <literal>APT::Get::allow-change-held-packages</"
+"literal>. Introduced in APT 1.1."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
msgid ""
"Force yes; this is a dangerous option that will cause apt to continue "
"without prompting if it is doing something potentially harmful. It should "
"not be used except in very special situations. Using <literal>force-yes</"
"literal> can potentially destroy your system! Configuration Item: "
-"<literal>APT::Get::force-yes</literal>."
+"<literal>APT::Get::force-yes</literal>. This is deprecated and replaced by "
+"<option>--allow-downgrades</option>, <option>--allow-remove-essential</"
+"option>, <option>--allow-change-held-packages</option> in 1.1."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:438
+#: apt-get.8.xml
msgid ""
"Instead of fetching the files to install their URIs are printed. Each URI "
"will have the path, the destination file name, the size and the expected MD5 "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:449
+#: apt-get.8.xml
msgid ""
"Use purge instead of remove for anything that would be removed. An asterisk "
"(\"*\") will be displayed next to packages which are scheduled to be purged. "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:457
+#: apt-get.8.xml
msgid ""
"Re-install packages that are already installed and at the newest version. "
"Configuration Item: <literal>APT::Get::ReInstall</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:462
+#: apt-get.8.xml
msgid ""
"This option is on by default; use <literal>--no-list-cleanup</literal> to "
"turn it off. When it is on, <command>apt-get</command> will automatically "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:472
+#: apt-get.8.xml
msgid ""
"This option controls the default input to the policy engine; it creates a "
"default pin at priority 990 using the specified release string. This "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:487
+#: apt-get.8.xml
msgid ""
"Only perform operations that are 'trivial'. Logically this can be considered "
"related to <option>--assume-yes</option>; where <option>--assume-yes</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:494
+#: apt-get.8.xml
msgid ""
"If any packages are to be removed apt-get immediately aborts without "
"prompting. Configuration Item: <literal>APT::Get::Remove</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:500
+#: apt-get.8.xml
msgid ""
"If the command is either <literal>install</literal> or <literal>remove</"
"literal>, then this option acts like running the <literal>autoremove</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:507
+#: apt-get.8.xml
msgid ""
"Only has meaning for the <literal>source</literal> and <literal>build-dep</"
"literal> commands. Indicates that the given source names are not to be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:518
+#: apt-get.8.xml
msgid ""
"Download only the diff, dsc, or tar file of a source archive. Configuration "
"Item: <literal>APT::Get::Diff-Only</literal>, <literal>APT::Get::Dsc-Only</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:524
+#: apt-get.8.xml
msgid ""
"Only process architecture-dependent build-dependencies. Configuration Item: "
"<literal>APT::Get::Arch-Only</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:529
+#: apt-get.8.xml
msgid ""
"Ignore if packages can't be authenticated and don't prompt about it. This "
-"is useful for tools like pbuilder. Configuration Item: <literal>APT::Get::"
-"AllowUnauthenticated</literal>."
+"can be useful while working with local repositories, but is a huge security "
+"risk if data authenticity isn't ensured in another way by the user itself. "
+"The usage of the <option>Trusted</option> option for &sources-list; entries "
+"should usually be preferred over this global override. Configuration Item: "
+"<literal>APT::Get::AllowUnauthenticated</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Forbid the update command to acquire unverifiable data from configured "
+"sources. APT will fail at the update command for repositories without valid "
+"cryptographically signatures. See also &apt-secure; for details on the "
+"concept and the implications. Configuration Item: <literal>Acquire::"
+"AllowInsecureRepositories</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:535
+#: apt-get.8.xml
msgid ""
"Show user friendly progress information in the terminal window when packages "
"are installed, upgraded or removed. For a machine parsable version of this "
"literal>."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. See <option>--with-source</option> description in &apt-"
+"cache; for further details."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:548 apt-cache.8.xml:345 apt-key.8.xml:176 apt-mark.8.xml:127
-#: apt.conf.5.xml:1222 apt_preferences.5.xml:700
+#: apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml apt.conf.5.xml
+#: apt_preferences.5.xml
msgid "Files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:559
+#: apt-get.8.xml
msgid ""
"&apt-cache;, &apt-cdrom;, &dpkg;, &sources-list;, &apt-conf;, &apt-config;, "
"&apt-secure;, The APT User's guide in &guidesdir;, &apt-preferences;, the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:565
+#: apt-get.8.xml
msgid ""
"<command>apt-get</command> returns zero on normal operation, decimal 100 on "
"error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-cache.8.xml:35
+#: apt-cache.8.xml
msgid "query the APT cache"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:41
+#: apt-cache.8.xml
msgid ""
"<command>apt-cache</command> performs a variety of operations on APT's "
"package cache. <command>apt-cache</command> does not manipulate the state of "
"the system but does provide operations to search and generate interesting "
-"output from the package metadata."
+"output from the package metadata. The metadata is acquired and updated via "
+"the 'update' command of e.g. <command>apt-get</command>, so that it can be "
+"outdated if the last update is too long ago, but in exchange <command>apt-"
+"cache</command> works independently of the availability of the configured "
+"sources (e.g. offline)."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:51
+#: apt-cache.8.xml
msgid ""
"<literal>gencaches</literal> creates APT's package cache. This is done "
"implicitly by all commands needing this cache if it is missing or outdated."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-cache.8.xml:55 apt-cache.8.xml:144 apt-cache.8.xml:165
-#: apt-cache.8.xml:187 apt-cache.8.xml:192 apt-cache.8.xml:208
-#: apt-cache.8.xml:226 apt-cache.8.xml:238
+#: apt-cache.8.xml
msgid "&synopsis-pkg;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:56
+#: apt-cache.8.xml
msgid ""
"<literal>showpkg</literal> displays information about the packages listed on "
"the command line. Remaining arguments are package names. The available "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting>
-#: apt-cache.8.xml:68
+#: apt-cache.8.xml
#, no-wrap
msgid ""
"Package: libreadline2\n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:80
+#: apt-cache.8.xml
msgid ""
"Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and "
"ncurses3.0 which must be installed for libreadline2 to work. In turn, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:89
+#: apt-cache.8.xml
msgid ""
"<literal>stats</literal> displays some statistics about the cache. No "
"further arguments are expected. Statistics reported are:"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:92
+#: apt-cache.8.xml
msgid ""
"<literal>Total package names</literal> is the number of package names found "
"in the cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:96
+#: apt-cache.8.xml
msgid ""
"<literal>Normal packages</literal> is the number of regular, ordinary "
"package names; these are packages that bear a one-to-one correspondence "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:102
+#: apt-cache.8.xml
msgid ""
"<literal>Pure virtual packages</literal> is the number of packages that "
"exist only as a virtual package name; that is, packages only \"provide\" the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:110
+#: apt-cache.8.xml
msgid ""
"<literal>Single virtual packages</literal> is the number of packages with "
"only one package providing a particular virtual package. For example, in the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:116
+#: apt-cache.8.xml
msgid ""
"<literal>Mixed virtual packages</literal> is the number of packages that "
"either provide a particular virtual package or have the virtual package name "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:123
+#: apt-cache.8.xml
msgid ""
"<literal>Missing</literal> is the number of package names that were "
"referenced in a dependency but were not provided by any package. Missing "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:130
+#: apt-cache.8.xml
msgid ""
"<literal>Total distinct</literal> versions is the number of package versions "
-"found in the cache; this value is therefore at least equal to the number of "
-"total package names. If more than one distribution is being accessed (for "
+"found in the cache. If more than one distribution is being accessed (for "
"instance, \"stable\" and \"unstable\"), this value can be considerably "
"larger than the number of total package names."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:137
+#: apt-cache.8.xml
msgid ""
"<literal>Total dependencies</literal> is the number of dependency "
"relationships claimed by all of the packages in the cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:145
+#: apt-cache.8.xml
msgid ""
"<literal>showsrc</literal> displays all the source package records that "
"match the given package names. All versions are shown, as well as all "
-"records that declare the name to be a binary package."
+"records that declare the name to be a binary package. Use <option>--only-"
+"source</option> to display only source package names."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:151
+#: apt-cache.8.xml
msgid ""
"<literal>dump</literal> shows a short listing of every package in the cache. "
"It is primarily for debugging."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:156
+#: apt-cache.8.xml
msgid ""
"<literal>dumpavail</literal> prints out an available list to stdout. This is "
"suitable for use with &dpkg; and is used by the &dselect; method."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:161
+#: apt-cache.8.xml
msgid ""
"<literal>unmet</literal> displays a summary of all unmet dependencies in the "
"package cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:166
+#: apt-cache.8.xml
msgid ""
"<literal>show</literal> performs a function similar to <command>dpkg --print-"
"avail</command>; it displays the package records for the named packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-cache.8.xml:171
+#: apt-cache.8.xml
msgid "&synopsis-regex;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:172
+#: apt-cache.8.xml
msgid ""
"<literal>search</literal> performs a full text search on all available "
"package lists for the POSIX regex pattern given, see ®ex;. It searches "
"including virtual package names. If <option>--full</option> is given then "
"output identical to <literal>show</literal> is produced for each matched "
"package, and if <option>--names-only</option> is given then the long "
-"description is not searched, only the package name is."
+"description is not searched, only the package name and provided packages are."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:183
+#: apt-cache.8.xml
msgid ""
"Separate arguments can be used to specify multiple search patterns that are "
"and'ed together."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:188
+#: apt-cache.8.xml
msgid ""
"<literal>depends</literal> shows a listing of each dependency a package has "
"and all the possible other packages that can fulfill that dependency."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:193
+#: apt-cache.8.xml
msgid ""
"<literal>rdepends</literal> shows a listing of each reverse dependency a "
"package has."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-cache.8.xml:197
+#: apt-cache.8.xml
#, fuzzy
msgid "<optional><replaceable>&synopsis-prefix;</replaceable></optional>"
msgstr ""
"apt-get install <replaceable>pacote</replaceable>/testing\n"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:198
+#: apt-cache.8.xml
msgid ""
"This command prints the name of each package APT knows. The optional "
"argument is a prefix match to filter the name list. The output is suitable "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:203
+#: apt-cache.8.xml
msgid ""
"Note that a package which APT knows of is not necessarily available to "
"download, installable or installed, e.g. virtual packages are also listed in "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:209
+#: apt-cache.8.xml
msgid ""
"<literal>dotty</literal> takes a list of packages on the command line and "
"generates output suitable for use by dotty from the <ulink url=\"http://www."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:218
+#: apt-cache.8.xml
msgid ""
"The resulting nodes will have several shapes; normal packages are boxes, "
"pure virtual packages are triangles, mixed virtual packages are diamonds, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:223
+#: apt-cache.8.xml
msgid "Caution, dotty cannot graph larger sets of packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:227
+#: apt-cache.8.xml
msgid ""
"The same as <literal>dotty</literal>, only for xvcg from the <ulink url="
"\"http://rw4.cs.uni-sb.de/users/sander/html/gsvcg1.html\">VCG tool</ulink>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-cache.8.xml:231
+#: apt-cache.8.xml
#, fuzzy
msgid "<optional><replaceable>&synopsis-pkg;</replaceable>…</optional>"
msgstr ""
"apt-get install <replaceable>pacote</replaceable>/testing\n"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:232
+#: apt-cache.8.xml
msgid ""
"<literal>policy</literal> is meant to help debug issues relating to the "
"preferences file. With no arguments it will print out the priorities of each "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:239
+#: apt-cache.8.xml
msgid ""
"<literal>apt-cache</literal>'s <literal>madison</literal> command attempts "
"to mimic the output format and a subset of the functionality of the Debian "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:255
+#: apt-cache.8.xml
msgid ""
"Select the file to store the package cache. The package cache is the primary "
"cache used by all operations. Configuration Item: <literal>Dir::Cache::"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:261
+#: apt-cache.8.xml
msgid ""
"Select the file to store the source cache. The source is used only by "
"<literal>gencaches</literal> and it stores a parsed version of the package "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:269
+#: apt-cache.8.xml
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quietness up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:276
+#: apt-cache.8.xml
msgid ""
"Print only important dependencies; for use with <literal>unmet</literal> and "
"<literal>depends</literal>. Causes only Depends and Pre-Depends relations to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:290
+#: apt-cache.8.xml
msgid ""
-"Per default the <literal>depends</literal> and <literal>rdepends</literal> "
+"Per default the <command>depends</command> and <command>rdepends</command> "
"print all dependencies. This can be tweaked with these flags which will omit "
"the specified dependency type. Configuration Item: <literal>APT::Cache::"
"Show<replaceable>DependencyType</replaceable></literal> e.g. <literal>APT::"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:297
+#: apt-cache.8.xml
+msgid ""
+"Per default <command>depends</command> and <command>rdepends</command> print "
+"only dependencies explicitly expressed in the metadata. With this flag it "
+"will also show dependencies implicitly added based on the encountered data. "
+"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this "
+"package also conflicts with the package foo from any other architecture. "
+"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
msgid ""
"Print full package records when searching. Configuration Item: "
"<literal>APT::Cache::ShowFull</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:302
+#: apt-cache.8.xml
msgid ""
"Print full records for all available versions. This is the default; to turn "
"it off, use <option>--no-all-versions</option>. If <option>--no-all-"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:311
+#: apt-cache.8.xml
msgid ""
"Perform automatic package cache regeneration, rather than use the cache as "
"it is. This is the default; to turn it off, use <option>--no-generate</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:317
+#: apt-cache.8.xml
msgid ""
-"Only search on the package names, not the long descriptions. Configuration "
-"Item: <literal>APT::Cache::NamesOnly</literal>."
+"Only search on the package and provided package names, not the long "
+"descriptions. Configuration Item: <literal>APT::Cache::NamesOnly</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:322
+#: apt-cache.8.xml
msgid ""
"Make <literal>pkgnames</literal> print all names, including virtual packages "
"and missing dependencies. Configuration Item: <literal>APT::Cache::"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:328
+#: apt-cache.8.xml
msgid ""
"Make <literal>depends</literal> and <literal>rdepends</literal> recursive so "
"that all packages mentioned are printed once. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:335
+#: apt-cache.8.xml
msgid ""
"Limit the output of <literal>depends</literal> and <literal>rdepends</"
"literal> to packages which are currently installed. Configuration Item: "
"<literal>APT::Cache::Installed</literal>."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. Supported are currently <literal>*.deb</literal>, "
+"<literal>*.dsc</literal>, <literal>*.changes</literal>, <literal>Sources</"
+"literal> and <literal>Packages</literal> files as well as source package "
+"directories. Files are matched based on their name only, not their content!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"<literal>Sources</literal> and <literal>Packages</literal> can be compressed "
+"in any format apt supports as long as they have the correct extension. If "
+"you need to store multiple of these files in one directory you can prefix a "
+"name of your choice with the last character being an underscore "
+"(\"<literal>_</literal>\"). Example: my.example_Packages.xz"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"Note that these sources are treated as trusted (see &apt-secure;). "
+"Configuration Item: <literal>APT::Sources::With</literal>."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:353
+#: apt-cache.8.xml
msgid "&apt-conf;, &sources-list;, &apt-get;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:358
+#: apt-cache.8.xml
msgid ""
"<command>apt-cache</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-key.8.xml:34
+#: apt-key.8.xml
msgid "APT key management utility"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:41
+#: apt-key.8.xml
msgid ""
"<command>apt-key</command> is used to manage the list of keys used by apt to "
"authenticate packages. Packages which have been authenticated using these "
"keys will be considered trusted."
msgstr ""
+#. type: Content of: <refentry><refsect1><para>
+#: apt-key.8.xml
+msgid ""
+"Note that if usage of <command>apt-key</command> is desired the additional "
+"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</"
+"package>) is required. For this reason alone the programmatic usage "
+"(especially in package maintainerscripts!) is strongly discouraged. Further "
+"more the output format of all commands is undefined and can and does change "
+"whenever the underlying commands change. <command>apt-key</command> will try "
+"to detect such usage and generates warnings on stderr in these cases."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml:47
+#: apt-key.8.xml
msgid "Commands"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:52
+#: apt-key.8.xml
msgid ""
"Add a new key to the list of trusted keys. The key is read from the "
"filename given with the parameter &synopsis-param-filename; or if the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:65
+#: apt-key.8.xml
+msgid ""
+"It is critical that keys added manually via <command>apt-key</command> are "
+"verified to belong to the owner of the repositories they claim to be for "
+"otherwise the &apt-secure; infrastructure is completely undermined."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Instead of using this command a keyring can be placed directly in the "
+"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive "
+"name (same rules for filename apply as for &apt-conf; files) and "
+"\"<literal>gpg</literal>\" as file extension."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
msgid "Remove a key from the list of trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:76
+#: apt-key.8.xml
msgid "Output the key &synopsis-param-keyid; to standard output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:87
+#: apt-key.8.xml
msgid "Output all trusted keys to standard output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:98
-msgid "List trusted keys."
+#: apt-key.8.xml
+msgid "List trusted keys with fingerprints."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:109
-msgid "List fingerprints of trusted keys."
+#: apt-key.8.xml
+msgid ""
+"Pass advanced options to gpg. With <command>adv --recv-key</command> you can "
+"e.g. download key from keyservers directly into the the trusted set of keys. "
+"Note that there are <emphasis>no</emphasis> checks performed, so it is easy "
+"to completely undermine the &apt-secure; infrastructure if used without care."
msgstr ""
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:120
-msgid ""
-"Pass advanced options to gpg. With adv --recv-key you can download the "
-"public key."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-key.8.xml
+msgid "(deprecated)"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:132
+#: apt-key.8.xml
msgid ""
"Update the local keyring with the archive keyring and remove from the local "
"keyring the archive keys which are no longer valid. The archive keyring is "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:146
+#: apt-key.8.xml
+msgid ""
+"Note that a distribution does not need to and in fact should not use this "
+"command any longer and instead ship keyring files in the <filename>/etc/apt/"
+"trusted.gpg</filename> directory directly as this avoids a dependency on "
+"<package>gnupg</package> and it is easier to manage keys by simply adding "
+"and removing files for maintainers and users alike."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
msgid ""
"Perform an update working similarly to the <command>update</command> command "
"above, but get the archive keyring from a URI instead and validate it "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml:162 apt-cdrom.8.xml:82
+#: apt-key.8.xml apt-mark.8.xml apt-cdrom.8.xml
msgid "Options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:163
+#: apt-key.8.xml
msgid ""
"Note that options need to be defined before the commands described in the "
"previous section."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:166
+#: apt-key.8.xml
msgid ""
"With this option it is possible to specify a particular keyring file the "
"command should operate on. The default is that a command is executed on the "
"this one."
msgstr ""
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:181
-#, fuzzy
-msgid "<filename>/etc/apt/trustdb.gpg</filename>"
-msgstr "<filename>/etc/apt.conf</>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:182
-msgid "Local trust database of archive keys."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:185
-msgid "&keyring-filename;"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:186
-msgid "Keyring of &keyring-distro; archive trusted keys."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:189
-msgid "&keyring-removed-filename;"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:190
-msgid "Keyring of &keyring-distro; archive removed trusted keys."
-msgstr ""
-
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:199
+#: apt-key.8.xml
#, fuzzy
msgid "&apt-get;, &apt-secure;"
msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-mark.8.xml:35
-msgid "mark/unmark a package as being automatically-installed"
+#: apt-mark.8.xml
+msgid "show, set and unset various settings for a package"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:41
+#: apt-mark.8.xml
msgid ""
-"<command>apt-mark</command> will change whether a package has been marked as "
-"being automatically installed."
+"<command>apt-mark</command> can be used as a unified front-end to set "
+"various settings for a package, such as marking a package as being "
+"automatically/manually installed or changing <command>dpkg</command> "
+"selections such as hold, install, deinstall and purge which are respected e."
+"g. by <command>apt-get dselect-upgrade</command> or <command>aptitude</"
+"command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Automatically and Manually Installed Packages"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:45
+#: apt-mark.8.xml
msgid ""
"When you request that a package is installed, and as a result other packages "
"are installed to satisfy its dependencies, the dependencies are marked as "
-"being automatically installed. Once these automatically installed packages "
-"are no longer depended on by any manually installed packages, they will be "
-"removed by e.g. <command>apt-get</command> or <command>aptitude</command>."
+"being automatically installed, while the package you installed explicitly is "
+"marked as manually installed. Once an automatically installed package is no "
+"longer depended on by any manually installed package it is considered no "
+"longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
+"command> will at least suggest removing them."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:54
+#: apt-mark.8.xml
msgid ""
"<literal>auto</literal> is used to mark a package as being automatically "
"installed, which will cause the package to be removed when no more manually "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:62
+#: apt-mark.8.xml
msgid ""
"<literal>manual</literal> is used to mark a package as being manually "
"installed, which will prevent the package from being automatically removed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:70
+#: apt-mark.8.xml
msgid ""
-"<literal>hold</literal> is used to mark a package as held back, which will "
-"prevent the package from being automatically installed, upgraded or "
-"removed. The command is only a wrapper around <command>dpkg --set-"
-"selections</command> and the state is therefore maintained by &dpkg; and not "
-"affected by the <option>--file</option> option."
+"<literal>showauto</literal> is used to print a list of automatically "
+"installed packages with each package on a new line. All automatically "
+"installed packages will be listed if no package is given. If packages are "
+"given only those which are automatically installed will be shown."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:80
+#: apt-mark.8.xml
msgid ""
-"<literal>unhold</literal> is used to cancel a previously set hold on a "
-"package to allow all actions again."
+"<literal>showmanual</literal> can be used in the same way as "
+"<literal>showauto</literal> except that it will print a list of manually "
+"installed packages instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-mark.8.xml
+msgid ""
+"Read/Write package stats from the filename given with the parameter "
+"&synopsis-param-filename; instead of from the default location, which is "
+"<filename>extended_status</filename> in the directory defined by the "
+"Configuration Item: <literal>Dir::State</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Prevent Changes for a Package"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:86
+#: apt-mark.8.xml
msgid ""
-"<literal>showauto</literal> is used to print a list of automatically "
-"installed packages with each package on a new line. All automatically "
-"installed packages will be listed if no package is given. If packages are "
-"given only those which are automatically installed will be shown."
+"<literal>hold</literal> is used to mark a package as held back, which will "
+"prevent the package from being automatically installed, upgraded or removed."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:94
+#: apt-mark.8.xml
msgid ""
-"<literal>showmanual</literal> can be used in the same way as "
-"<literal>showauto</literal> except that it will print a list of manually "
-"installed packages instead."
+"<literal>unhold</literal> is used to cancel a previously set hold on a "
+"package to allow all actions again."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:101
+#: apt-mark.8.xml
msgid ""
"<literal>showhold</literal> is used to print a list of packages on hold in "
"the same way as for the other show commands."
msgstr ""
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:117
+#. type: Content of: <refentry><refsect1><title>
+#: apt-mark.8.xml
+msgid "Schedule Packages for Install, Remove and Purge"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-mark.8.xml
msgid ""
-"Read/Write package stats from the filename given with the parameter "
-"&synopsis-param-filename; instead of from the default location, which is "
-"<filename>extended_status</filename> in the directory defined by the "
-"Configuration Item: <literal>Dir::State</literal>."
+"Some front-ends like <command>apt-get dselect-upgrade</command> can be used "
+"to apply previously scheduled changes to the install state of packages. Such "
+"changes can be scheduled with the <option>install</option>, <option>remove</"
+"option> (also known as <option>deinstall</option>) and <option>purge</"
+"option> commands. Packages with a specific selection can be displayed with "
+"<option>showinstall</option>, <option>showremove</option> and "
+"<option>showpurge</option> respectively. More information about these so "
+"called dpkg selections can be found in &dpkg;."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:138
+#: apt-mark.8.xml
msgid ""
"<command>apt-mark</command> returns zero on normal operation, non-zero on "
"error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-secure.8.xml:49
+#: apt-secure.8.xml
msgid "Archive authentication support for APT"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:54
+#: apt-secure.8.xml
+msgid ""
+"Starting with version 0.6, <command>APT</command> contains code that does "
+"signature checking of the Release file for all repositories. This ensures "
+"that data like packages in the archive can't be modified by people who have "
+"no access to the Release file signing key. Starting with version 1.1 "
+"<command>APT</command> requires repositories to provide recent "
+"authentication information for unimpeded usage of the repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"If an archive has an unsigned Release file or no Release file at all current "
+"APT versions will refuse to download data from them by default in "
+"<command>update</command> operations and even if forced to download front-"
+"ends like &apt-get; will require explicit confirmation if an installation "
+"request includes a package from such an unauthenticated archive."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it "
+"encounters unauthenticated archives to give a slightly longer grace period "
+"on this backward compatibility effecting change. This exception will be "
+"removed in future releases and you can opt-out of this grace period by "
+"setting the configuration option <option>Binary::apt-get::Acquire::"
+"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--"
+"no-allow-insecure-repositories</option> on the command line."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
msgid ""
-"Starting with version 0.6, <command>apt</command> contains code that does "
-"signature checking of the Release file for all archives. This ensures that "
-"packages in the archive can't be modified by people who have no access to "
-"the Release file signing key."
+"You can force all APT clients to raise only warnings by setting the "
+"configuration option <option>Acquire::AllowInsecureRepositories</option> to "
+"<literal>true</literal>. Individual repositories can also be allowed to be "
+"insecure via the &sources-list; option <literal>allow-insecure=yes</"
+"literal>. Note that insecure repositories are strongly discouraged and all "
+"options to force apt to continue supporting them will eventually be "
+"removed. Users also have the <option>Trusted</option> option available to "
+"disable even the warnings, but be sure to understand the implications as "
+"detailed in &sources-list;."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:62
+#: apt-secure.8.xml
msgid ""
-"If a package comes from a archive without a signature, or with a signature "
-"that apt does not have a key for, that package is considered untrusted, and "
-"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives; future releases might force all "
-"sources to be verified before downloading packages from them."
+"A repository which previously was authentication but would loose this state "
+"in an <command>update</command> operation raises an error in all APT clients "
+"irrespective of the option to allow or forbid usage of insecure "
+"repositories. The error can be overcome by additionally setting "
+"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to "
+"<literal>true</literal> or for Individual repositories with the &sources-"
+"list; option <literal>allow-downgrade-to-insecure=yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:71
+#: apt-secure.8.xml
msgid ""
-"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
-"authentication feature."
+"Note: All APT-based package management front-ends like &apt-get;, &aptitude; "
+"and &synaptic; support this authentication feature, so this manpage uses "
+"<literal>APT</literal> to refer to them all for simplicity only."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:76
-msgid "Trusted archives"
+#: apt-secure.8.xml
+msgid "Trusted Repositories"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:79
+#: apt-secure.8.xml
msgid ""
-"The chain of trust from an apt archive to the end user is made up of several "
+"The chain of trust from an APT archive to the end user is made up of several "
"steps. <command>apt-secure</command> is the last step in this chain; "
"trusting an archive does not mean that you trust its packages not to contain "
"malicious code, but means that you trust the archive maintainer. It's the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:87
+#: apt-secure.8.xml
msgid ""
"apt-secure does not review signatures at a package level. If you require "
"tools to do this you should look at <command>debsig-verify</command> and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:94
+#: apt-secure.8.xml
msgid ""
-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. In order to become "
-"effective, this upload needs to be signed by a key contained in the Debian "
-"Maintainers keyring (available in the debian-keyring package). Maintainers' "
-"keys are signed by other maintainers following pre-established procedures to "
-"ensure the identity of the key holder."
+"The chain of trust in Debian starts (e.g.) when a maintainer uploads a new "
+"package or a new version of a package to the Debian archive. In order to "
+"become effective, this upload needs to be signed by a key contained in one "
+"of the Debian package maintainer keyrings (available in the debian-keyring "
+"package). Maintainers' keys are signed by other maintainers following pre-"
+"established procedures to ensure the identity of the key holder. Similar "
+"procedures exist in all Debian-based distributions."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:104
+#: apt-secure.8.xml
msgid ""
"Once the uploaded package is verified and included in the archive, the "
"maintainer signature is stripped off, and checksums of the package are "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:115
+#: apt-secure.8.xml
msgid ""
"End users can check the signature of the Release file, extract a checksum of "
"a package from it and compare it with the checksum of the package they "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:120
+#: apt-secure.8.xml
msgid ""
"Notice that this is distinct from checking signatures on a per package "
"basis. It is designed to prevent two possible attacks:"
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:125
+#: apt-secure.8.xml
msgid ""
"<literal>Network \"man in the middle\" attacks</literal>. Without signature "
"checking, malicious agents can introduce themselves into the package "
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:133
+#: apt-secure.8.xml
msgid ""
"<literal>Mirror network compromise</literal>. Without signature checking, a "
"malicious agent can compromise a mirror host and modify the files in it to "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:140
+#: apt-secure.8.xml
msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
+"However, it does not defend against a compromise of the master server itself "
+"(which signs the packages) or against a compromise of the key used to sign "
+"the Release files. In any case, this mechanism can complement a per-package "
+"signature."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:146
-msgid "User configuration"
+#: apt-secure.8.xml
+msgid "User Configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:148
+#: apt-secure.8.xml
msgid ""
"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys, although an installation of "
-"this release will automatically contain the default Debian archive signing "
-"keys used in the Debian package repositories."
+"by APT to trust repositories. It can be used to add or remove keys as well "
+"as list the trusted keys. Limiting which key(s) are able to sign which "
+"archive is possible via the <option>Signed-By</option> in &sources-list;."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:155
+#: apt-secure.8.xml
+msgid ""
+"Note that a default installation already contains all keys to securely "
+"acquire packages from the default repositories, so fiddling with "
+"<command>apt-key</command> is only needed if third-party repositories are "
+"added."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
msgid ""
"In order to add a new key you need to first download it (you should make "
"sure you are using a trusted communication channel when retrieving it), add "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:164
-msgid "Archive configuration"
+#: apt-secure.8.xml
+msgid "Archive Configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:166
+#: apt-secure.8.xml
msgid ""
"If you want to provide archive signatures in an archive under your "
"maintenance you have to:"
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:171
+#: apt-secure.8.xml
msgid ""
"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist "
"already. You can do this by running <command>apt-ftparchive release</"
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:176
+#: apt-secure.8.xml
msgid ""
"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg --"
"clearsign -o InRelease Release</command> and <command>gpg -abs -o Release."
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:180
+#: apt-secure.8.xml
msgid ""
-"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
+"<emphasis>Publish the key fingerprint</emphasis>, so that your users will "
"know what key they need to import in order to authenticate the files in the "
-"archive."
+"archive. It is best to ship your key in its own keyring package like "
+"&keyring-distro; does with &keyring-package; to be able to distribute "
+"updates and key transitions automatically later."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
+#: apt-secure.8.xml
+msgid ""
+"<emphasis>Provide instructions on how to add your archive and key</"
+"emphasis>. If your users can't acquire your key securely the chain of trust "
+"described above is broken. How you can help users add your key depends on "
+"your archive and target audience ranging from having your keyring package "
+"included in another archive users already have configured (like the default "
+"repositories of their distribution) to leveraging the web of trust."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:187
+#: apt-secure.8.xml
msgid ""
"Whenever the contents of the archive change (new packages are added or "
"removed) the archive maintainer has to follow the first two steps outlined "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:195
+#: apt-secure.8.xml
msgid ""
"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, "
"&debsign;, &debsig-verify;, &gpg;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:199
+#: apt-secure.8.xml
msgid ""
"For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
-"Security Infrastructure</ulink> chapter of the Securing Debian Manual "
-"
(available also in the harden-doc package) and the <ulink url=\"http://www."
+"\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
+"Security Infrastructure</ulink> chapter of the Securing Debian Manual (also "
+"
available in the harden-doc package) and the <ulink url=\"http://www."
"cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
"ulink> by V. Alex Brennen."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:212
+#: apt-secure.8.xml
msgid "Manpage Authors"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:214
+#: apt-secure.8.xml
msgid ""
"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac "
"Jones, Colin Walters, Florian Weimer and Michael Vogt."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-cdrom.8.xml:34
+#: apt-cdrom.8.xml
msgid "APT CD-ROM management utility"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:40
+#: apt-cdrom.8.xml
msgid ""
"<command>apt-cdrom</command> is used to add a new CD-ROM to APT's list of "
"available sources. <command>apt-cdrom</command> takes care of determining "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:47
+#: apt-cdrom.8.xml
msgid ""
"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT "
"system; it cannot be done by hand. Furthermore each disc in a multi-CD set "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:58
+#: apt-cdrom.8.xml
msgid ""
"<literal>add</literal> is used to add a new disc to the source list. It will "
"unmount the CD-ROM device, prompt for a disc to be inserted and then proceed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:66
+#: apt-cdrom.8.xml
msgid ""
"APT uses a CD-ROM ID to track which disc is currently in the drive and "
"maintains a database of these IDs in <filename>&statedir;/cdroms.list</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:74
+#: apt-cdrom.8.xml
msgid ""
"A debugging tool to report the identity of the current disc as well as the "
"stored file name"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:87
+#: apt-cdrom.8.xml
msgid ""
"Do not try to auto-detect the CD-ROM path. Usually combined with the "
"<option>--cdrom</option> option. Configuration Item: <literal>Acquire::"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:95
+#: apt-cdrom.8.xml
msgid ""
"Mount point; specify the location to mount the CD-ROM. This mount point must "
"be listed in <filename>/etc/fstab</filename> and properly configured. "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:104
+#: apt-cdrom.8.xml
msgid ""
"Rename a disc; change the label of a disc or override the disc's given "
"label. This option will cause <command>apt-cdrom</command> to prompt for a "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:113
+#: apt-cdrom.8.xml
msgid ""
"No mounting; prevent <command>apt-cdrom</command> from mounting and "
"unmounting the mount point. Configuration Item: <literal>APT::CDROM::"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:121
+#: apt-cdrom.8.xml
msgid ""
"Fast Copy; Assume the package files are valid and do not check every "
"package. This option should be used only if <command>apt-cdrom</command> has "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:131
+#: apt-cdrom.8.xml
msgid ""
"Thorough Package Scan; This option may be needed with some old Debian "
"1.1/1.2 discs that have Package files in strange places. It takes much "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:142
+#: apt-cdrom.8.xml
msgid ""
"No Changes; Do not change the &sources-list; file and do not write index "
"files. Everything is still checked however. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:155
+#: apt-cdrom.8.xml
#, fuzzy
msgid "&apt-conf;, &apt-get;, &sources-list;"
msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:160
+#: apt-cdrom.8.xml
msgid ""
"<command>apt-cdrom</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-config.8.xml:35
+#: apt-config.8.xml
msgid "APT Configuration Query program"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:41
+#: apt-config.8.xml
msgid ""
"<command>apt-config</command> is an internal program used by various "
"portions of the APT suite to provide consistent configurability. It accesses "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:53
+#: apt-config.8.xml
msgid ""
"shell is used to access the configuration information from a shell script. "
"It is given pairs of arguments, the first being a shell variable and the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting>
-#: apt-config.8.xml:61
+#: apt-config.8.xml
#, no-wrap
msgid ""
"OPTS=\"-f\"\n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:66
+#: apt-config.8.xml
msgid ""
"This will set the shell environment variable $OPTS to the value of MyApp::"
"options with a default of <option>-f</option>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:70
+#: apt-config.8.xml
msgid ""
"The configuration item may be postfixed with a /[fdbi]. f returns file "
"names, d returns directories, b returns true or false and i returns an "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:79
+#: apt-config.8.xml
msgid "Just show the contents of the configuration space."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:92
+#: apt-config.8.xml
msgid ""
"Include options which have an empty value. This is the default, so use --no-"
"empty to remove them from the output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-config.8.xml:97
+#: apt-config.8.xml
msgid "%f "%v";%n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:98
+#: apt-config.8.xml
msgid ""
"Defines the output of each config option. %t will be replaced with "
"its individual name, %f with its full hierarchical name and %v "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:112 apt-extracttemplates.1.xml:73 apt-sortpkgs.1.xml:66
-#: apt-ftparchive.1.xml:610
+#: apt-config.8.xml apt-extracttemplates.1.xml apt-sortpkgs.1.xml
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "&apt-conf;"
msgstr ""
" "
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:117
+#: apt-config.8.xml
msgid ""
"<command>apt-config</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refentryinfo><author><contrib>
-#: apt.conf.5.xml:22
+#: apt.conf.5.xml
msgid "Initial documentation of Debug::*."
msgstr ""
#. type: Content of: <refentry><refentryinfo><author><email>
-#: apt.conf.5.xml:23
+#: apt.conf.5.xml
msgid "dburrows@debian.org"
msgstr ""
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt.conf.5.xml:33 apt_preferences.5.xml:27 sources.list.5.xml:28
+#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml
msgid "5"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt.conf.5.xml:40
+#: apt.conf.5.xml
msgid "Configuration file for APT"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:44
+#: apt.conf.5.xml
msgid ""
"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared "
"by all the tools in the APT suite of tools, though it is by no means the "
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:50
+#: apt.conf.5.xml
msgid ""
"When an APT tool starts up it will read the configuration files in the "
"following order:"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:52
+#: apt.conf.5.xml
msgid ""
"the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
"any)"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:54
+#: apt.conf.5.xml
msgid ""
"all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
"order which have either no or \"<literal>conf</literal>\" as filename "
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:61
+#: apt.conf.5.xml
msgid ""
"the main configuration file specified by <literal>Dir::Etc::main</literal>"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:63
+#: apt.conf.5.xml
+msgid ""
+"all options set in the binary specific configuration subtree are moved into "
+"the root of the tree."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
+#: apt.conf.5.xml
msgid ""
"the command line options are applied to override the configuration "
"directives or to load even more configuration files."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:67
+#: apt.conf.5.xml
msgid "Syntax"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:68
+#: apt.conf.5.xml
msgid ""
"The configuration file is organized in a tree with options organized into "
"functional groups. Option specification is given with a double colon "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:74
+#: apt.conf.5.xml
msgid ""
"Syntactically the configuration language is modeled after what the ISC tools "
"such as bind and dhcp use. Lines starting with <literal>//</literal> are "
msgstr ""
#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:87
+#: apt.conf.5.xml
#, no-wrap
msgid ""
"APT {\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:95
+#: apt.conf.5.xml
msgid ""
"with newlines placed to make it more readable. Lists can be created by "
"opening a scope and including a single string enclosed in quotes followed by "
msgstr ""
#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:100
+#: apt.conf.5.xml
#, no-wrap
msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:103
+#: apt.conf.5.xml
msgid ""
"In general the sample configuration file &configureindex; is a good guide "
"for how it should look."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:106
+#: apt.conf.5.xml
msgid ""
"Case is not significant in names of configuration items, so in the previous "
"example you could use <literal>dpkg::pre-install-pkgs</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:109
+#: apt.conf.5.xml
msgid ""
"Names for the configuration items are optional if a list is defined as can "
"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:114
+#: apt.conf.5.xml
msgid ""
"Two special commands are defined: <literal>#include</literal> (which is "
"deprecated and not supported by alternative implementations) and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:124
+#: apt.conf.5.xml
msgid ""
"The <literal>#clear</literal> command is the only way to delete a list or a "
"complete scope. Reopening a scope (or using the syntax described below with "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:132
+#: apt.conf.5.xml
msgid ""
"All of the APT tools take an -o option which allows an arbitrary "
"configuration directive to be specified on the command line. The syntax is a "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:140
+#: apt.conf.5.xml
msgid ""
"Note that appending items to a list using <literal>::</literal> only works "
"for one item per line, and that you should not use it in combination with "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:155
+#: apt.conf.5.xml
msgid "The APT Group"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:156
+#: apt.conf.5.xml
msgid ""
"This group of options controls general APT behavior as well as holding the "
"options for all of the tools."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:161
+#: apt.conf.5.xml
msgid ""
"System Architecture; sets the architecture to use when fetching files and "
"parsing package lists. The internal default is the architecture apt was "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:168
+#: apt.conf.5.xml
msgid ""
"All Architectures the system supports. For instance, CPUs implementing the "
"<literal>amd64</literal> (also called <literal>x86-64</literal>) "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:182
+#: apt.conf.5.xml
+msgid ""
+"This scope defines which compression formats are supported, how compression "
+"and decompression can be performed if support for this format isn't built "
+"into apt directly and a cost-value indicating how costly it is to compress "
+"something in this format. As an example the following configuration stanza "
+"would allow apt to download and uncompress as well as create and store files "
+"with the low-cost <literal>.reversed</literal> file extension which it will "
+"pass to the command <command>rev</command> without additional commandline "
+"parameters for compression and uncompression:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting>
+#: apt.conf.5.xml
+#, no-wrap
+msgid ""
+"APT::Compressor::rev {\n"
+"\tName \"rev\";\n"
+"\tExtension \".reversed\";\n"
+"\tBinary \"rev\";\n"
+"\tCompressArg {};\n"
+"\tUncompressArg {};\n"
+"\tCost \"10\";\n"
+"};\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
msgid ""
"List of all build profiles enabled for build-dependency resolution, without "
"the \"<literal>profile.</literal>\" namespace prefix. By default this list "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:190
+#: apt.conf.5.xml
msgid ""
"Default release to install packages from if more than one version is "
"available. Contains release name, codename or release version. Examples: "
-"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', "
-"'4.0', '5.0*'. See also &apt-preferences;."
+"'stable', 'testing', 'unstable', '&debian-stable-codename;', '&debian-"
+"testing-codename;', '4.0', '5.0*'. See also &apt-preferences;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:196
+#: apt.conf.5.xml
msgid ""
"Ignore held packages; this global option causes the problem resolver to "
"ignore held packages in its decision making."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:201
+#: apt.conf.5.xml
msgid ""
"Defaults to on. When turned on the autoclean feature will remove any "
"packages which can no longer be downloaded from the cache. If turned off "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:209
+#: apt.conf.5.xml
msgid ""
"Defaults to on, which will cause APT to install essential and important "
"packages as soon as possible in an install/upgrade operation, in order to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:221
+#: apt.conf.5.xml
msgid ""
"The immediate configuration marker is also applied in the potentially "
"problematic case of circular dependencies, since a dependency with the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:234
+#: apt.conf.5.xml
msgid ""
"Before a big operation like <literal>dist-upgrade</literal> is run with this "
"option disabled you should try to explicitly <literal>install</literal> the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:245
+#: apt.conf.5.xml
msgid ""
"Never enable this option unless you <emphasis>really</emphasis> know what "
"you are doing. It permits APT to temporarily remove an essential package to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:257
+#: apt.conf.5.xml
msgid ""
"APT uses since version 0.7.26 a resizable memory mapped cache file to store "
"the available information. <literal>Cache-Start</literal> acts as a hint of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:273
+#: apt.conf.5.xml
msgid "Defines which packages are considered essential build dependencies."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:277
+#: apt.conf.5.xml
msgid ""
"The Get subsection controls the &apt-get; tool; please see its documentation "
"for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:282
+#: apt.conf.5.xml
msgid ""
"The Cache subsection controls the &apt-cache; tool; please see its "
"documentation for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:287
+#: apt.conf.5.xml
msgid ""
"The CDROM subsection controls the &apt-cdrom; tool; please see its "
"documentation for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:293
+#: apt.conf.5.xml
msgid "The Acquire Group"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:294
+#: apt.conf.5.xml
msgid ""
"The <literal>Acquire</literal> group of options controls the download of "
"packages as well as the various \"acquire methods\" responsible for the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:301
+#: apt.conf.5.xml
msgid ""
"Security related option defaulting to true, as giving a Release file's "
"validation an expiration date prevents replay attacks over a long timescale, "
"user system. Archive maintainers are encouraged to create Release files with "
"the <literal>Valid-Until</literal> header, but if they don't or a stricter "
"value is desired the <literal>Max-ValidTime</literal> option below can be "
-"used."
+"used. The <option>Check-Valid-Until</option> option of &sources-list; "
+"entries should be preferred to disable the check selectively instead of "
+"using this global override."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:314
+#: apt.conf.5.xml
msgid ""
"Maximum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
"<literal>Valid-Until</literal> header the earlier date of the two is used as "
"the expiration date. The default value is <literal>0</literal> which stands "
"for \"valid forever\". Archive specific settings can be made by appending "
-"the label of the archive to the option name."
+"the label of the archive to the option name. Preferably, the same can be "
+"achieved for specific &sources-list; entries by using the <option>Valid-"
+"Until-Max</option> option there."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:326
+#: apt.conf.5.xml
msgid ""
"Minimum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
"(local) mirror of a more frequently updated archive with a <literal>Valid-"
"Until</literal> header instead of completely disabling the expiration date "
"checking. Archive specific settings can and should be used by appending the "
-"label of the archive to the option name."
+"label of the archive to the option name. Preferably, the same can be "
+"achieved for specific &sources-list; entries by using the <option>Valid-"
+"Until-Min</option> option there."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:338
+#: apt.conf.5.xml
msgid ""
"Try to download deltas called <literal>PDiffs</literal> for indexes (like "
"<filename>Packages</filename> files) instead of downloading whole ones. True "
-"by default."
+"by default. Preferably, this can be set for specific &sources-list; entries "
+"or index files by using the <option>PDiffs</option> option there."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:341
+#: apt.conf.5.xml
msgid ""
"Two sub-options to limit the use of PDiffs are also available: "
"<literal>FileLimit</literal> can be used to specify a maximum number of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:351
+#: apt.conf.5.xml
+msgid ""
+"Try to download indexes via an URI constructed from a hashsum of the "
+"expected file rather than downloaded via a well-known stable filename. True "
+"by default, but automatically disabled if the source indicates no support "
+"for it. Usage can be forced with the special value \"force\". Preferably, "
+"this can be set for specific &sources-list; entries or index files by using "
+"the <option>By-Hash</option> option there."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
msgid ""
"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
"literal> or <literal>access</literal> which determines how APT parallelizes "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:359
+#: apt.conf.5.xml
msgid ""
"Number of retries to perform. If this is non-zero APT will retry failed "
"files the given number of times."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:364
+#: apt.conf.5.xml
msgid ""
"Use symlinks for source archives. If set to true then source archives will "
"be symlinked when possible instead of copying. True is the default."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:369
+#: apt.conf.5.xml
msgid ""
"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. "
"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:377
+#: apt.conf.5.xml
msgid ""
"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
"caches. <literal>No-Cache</literal> tells the proxy not to use its cached "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:387 apt.conf.5.xml:475
+#: apt.conf.5.xml
msgid ""
"The option <literal>timeout</literal> sets the timeout timer used by the "
"method; this value applies to the connection as well as the data timeout."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:390
+#: apt.conf.5.xml
msgid ""
"The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to "
"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e."
"g. on high-latency connections. It specifies how many requests are sent in a "
-"pipeline. Previous APT versions had a default of 10 for this setting, but "
-"the default value is now 0 (= disabled) to avoid problems with the ever-"
-"growing amount of webservers and proxies which choose to not conform to the "
-"HTTP/1.1 specification."
+"pipeline. APT tries to detect and workaround misbehaving webservers and "
+"proxies at runtime, but if you know that yours does not conform to the "
+"HTTP/1.1 specification pipelining can be disabled by setting the value to 0. "
+"It is enabled by default with the value 10."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:397
+#: apt.conf.5.xml
msgid ""
"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will "
"follow redirects, which is enabled by default."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:400
+#: apt.conf.5.xml
msgid ""
"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
"literal> which accepts integer values in kilobytes per second. The default "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:407
+#: apt.conf.5.xml
msgid ""
"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
"User-Agent for the http download method as some proxies allow access for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:411
+#: apt.conf.5.xml
msgid ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
-"an external command to discover the http proxy to use. Apt expects the "
-"command to output the proxy on stdout in the style <literal>http://proxy:"
-"port/</literal>. This will override the generic <literal>Acquire::http::"
-"Proxy</literal> but not any specific host proxy configuration set via "
-"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-"
-"client; package for an example implementation that uses avahi. This option "
-"takes precedence over the legacy option name <literal>ProxyAutoDetect</"
-"literal>."
+"an external command to discover the http proxy to use. The first and only "
+"parameter is an URI denoting the host to be contacted to allow for host-"
+"specific configuration. APT expects the command to output the proxy on "
+"stdout as a single line in the style <literal>http://proxy:port/</literal> "
+"or the word <literal>DIRECT</literal> if no proxy should be used. No output "
+"indicates that the generic proxy settings should be used. Note that auto-"
+"detection will not be used for a host if a host-specific proxy configuration "
+"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</"
+"replaceable></literal>. See the &squid-deb-proxy-client; package for an "
+"example implementation that uses avahi. This option takes precedence over "
+"the legacy option name <literal>ProxyAutoDetect</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:429
+#: apt.conf.5.xml
msgid ""
"The <literal>Cache-control</literal>, <literal>Timeout</literal>, "
"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:437
+#: apt.conf.5.xml
msgid ""
"<literal>CaInfo</literal> suboption specifies place of file that holds info "
"about trusted certificates. <literal><host>::CaInfo</literal> is the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:458
+#: apt.conf.5.xml
msgid ""
"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. "
"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:478
+#: apt.conf.5.xml
msgid ""
"Several settings are provided to control passive mode. Generally it is safe "
"to leave passive mode on; it works in nearly every environment. However, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:485
+#: apt.conf.5.xml
msgid ""
"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
"envar> environment variable to an HTTP URL - see the discussion of the http "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:490
+#: apt.conf.5.xml
msgid ""
"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:504
+#: apt.conf.5.xml
#, no-wrap
msgid "/cdrom/::Mount \"foo\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:499
+#: apt.conf.5.xml
msgid ""
"For URIs using the <literal>cdrom</literal> method, the only configurable "
"option is the mount point, <literal>cdrom::Mount</literal>, which must be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:512
+#: apt.conf.5.xml
msgid ""
"For GPGV URIs the only configurable option is <literal>gpgv::Options</"
"literal>, which passes additional parameters to gpgv."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:523
+#: apt.conf.5.xml
#, no-wrap
msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:518
+#: apt.conf.5.xml
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
-"compression formats. By default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files; with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
+"compression formats. By default the acquire methods can decompress and "
+"recompress many common formats like <command>xz</command> and <command>gzip</"
+"command>; with this scope the supported formats can be queried, modified as "
+"well as support for more formats added (see also <option>APT::Compressor</"
+"
option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:528
+#: apt.conf.5.xml
#, no-wrap
msgid "Acquire::CompressionTypes::Order:: \"gz\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:531
+#: apt.conf.5.xml
#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:524
+#: apt.conf.5.xml
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"acquire system will try the first and proceed with the next compression type "
"in this list on error, so to prefer one over the other type simply add the "
-"preferred type first - default types not already added will be implicitly "
-"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this: "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> to the list explicitly as it will be added "
-"automatically."
+"preferred type first - types not already added will be implicitly appended "
+"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> "
+"can be used to prefer <command>gzip</command> compressed files over all "
+"other compression formats. If <command>xz</command> should be preferred "
+"over <command>gzip</command> and <command>bzip2</command> the configure "
+"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It "
+"is not needed to add <literal>bz2</literal> to the list explicitly as it "
+"will be added automatically."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:538
+#: apt.conf.5.xml
#, no-wrap
msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:533
+#: apt.conf.5.xml
msgid ""
"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
-"literal> will be checked at run time. If this option has been set, the "
-"method will only be used if this file exists; e.g. for the <literal>bzip2</"
-"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
-"\" id=\"0\"/> Note also that list entries specified on the command line will "
-"be added at the end of the list specified in the configuration files, but "
-"before the default entries. To prefer a type in this case over the ones "
-"specified in the configuration files you can set the option direct - not in "
-"list style. This will not override the defined list; it will only prefix "
-"the list with this type."
+"literal> will be checked at run time. If this option has been set and "
+"support for this format isn't directly built into apt, the method will only "
+"be used if this file exists; e.g. for the <literal>bzip2</literal> method "
+"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> "
+"Note also that list entries specified on the command line will be added at "
+"the end of the list specified in the configuration files, but before the "
+"default entries. To prefer a type in this case over the ones specified in "
+"the configuration files you can set the option direct - not in list style. "
+"This will not override the defined list; it will only prefix the list with "
+"this type."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:543
+#: apt.conf.5.xml
msgid ""
"The special type <literal>uncompressed</literal> can be used to give "
"uncompressed files a preference, but note that most archives don't provide "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:550
+#: apt.conf.5.xml
msgid ""
"When downloading <literal>gzip</literal> compressed indexes (Packages, "
"Sources, or Translations), keep them gzip compressed locally instead of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:558
+#: apt.conf.5.xml
msgid ""
"The Languages subsection controls which <filename>Translation</filename> "
"files are downloaded and in which order APT tries to display the description-"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:575
+#: apt.conf.5.xml
#, no-wrap
msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:563
+#: apt.conf.5.xml
msgid ""
"The default list includes \"environment\" and \"en\". "
"\"<literal>environment</literal>\" has a special meaning here: it will be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:576
+#: apt.conf.5.xml
msgid ""
"Note: To prevent problems resulting from APT being executed in different "
"environments (e.g. by different users or by other programs) all Translation "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:585
+#: apt.conf.5.xml
msgid "When downloading, force to use only the IPv4 protocol."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:591
+#: apt.conf.5.xml
msgid "When downloading, force to use only the IPv6 protocol."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"The maximum file size of Release/Release.gpg/InRelease files. The default "
+"is 10MB."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"This option controls if apt will use the DNS SRV server record as specified "
+"in RFC 2782 to select an alternative server to connect to. The default is "
+"\"true\"."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Allow update operations to load data files from repositories without "
+"sufficient security information. The default value is \"<literal>false</"
+"literal>\". Concept, implications as well as alternatives are detailed in "
+"&apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Allow update operations to load data files from repositories which provide "
+"security information, but these are deemed no longer cryptographically "
+"strong enough. The default value is \"<literal>false</literal>\". Concept, "
+"implications as well as alternatives are detailed in &apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Allow that a repository that was previously gpg signed to become unsigned "
+"during an update operation. When there is no valid signature for a "
+"previously trusted repository apt will refuse the update. This option can be "
+"used to override this protection. You almost certainly never want to enable "
+"this. The default is <literal>false</literal>. Concept, implications as "
+"well as alternatives are detailed in &apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt.conf.5.xml
+msgid "scope"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Acquiring changelogs can only be done if an URI is known from where to get "
+"them. Preferable the Release file indicates this in a 'Changelogs' field. "
+"If this isn't available the Label/Origin field of the Release file is used "
+"to check if a <literal>Acquire::Changelogs::URI::Label::<replaceable>LABEL</"
+"replaceable></literal> or <literal>Acquire::Changelogs::URI::Origin::"
+"<replaceable>ORIGIN</replaceable></literal> option exists and if so this "
+"value is taken. The value in the Release file can be overridden with "
+"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
+"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
+"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
+"normal URI to a text file, except that package specific data is replaced "
+"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
+"1. if the package is from a component (e.g. <literal>main</literal>) this "
+"is the first part otherwise it is omitted, 2. the first letter of source "
+"package name, except if the source package name starts with '<literal>lib</"
+"literal>' in which case it will be the first four letters. 3. The complete "
+"source package name. 4. the complete name again and 5. the source version. "
+"The first (if present), second, third and fourth part are separated by a "
+"slash ('<literal>/</literal>') and between the fourth and fifth part is an "
+"underscore ('<literal>_</literal>'). The special value '<literal>no</"
+"literal>' is available for this option indicating that this source can't be "
+"used to acquire changelog files from. Another source will be tried if "
+"available in this case."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.conf.5.xml
+msgid "Binary specific configuration"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Especially with the introduction of the <command>apt</command> binary it can "
+"be useful to set certain options only for a specific binary as even options "
+"which look like they would effect only a certain binary like <option>APT::"
+"Get::Show-Versions</option> effect <command>apt-get</command> as well as "
+"<command>apt</command>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Setting an option for a specific binary only can be achieved by setting the "
+"option inside the <option>Binary::<replaceable>specific-binary</"
+"replaceable></option> scope. Setting the option <option>APT::Get::Show-"
+"Versions</option> for the <command>apt</command> only can e.g. by done by "
+"setting <option>Binary::apt::APT::Get::Show-Versions</option> instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.conf.5.xml
+msgid ""
+"Note that as seen in the DESCRIPTION section further above you can't set "
+"binary-specific options on the commandline itself nor in configuration files "
+"loaded via the commandline."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:598
+#: apt.conf.5.xml
msgid "Directories"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:600
+#: apt.conf.5.xml
msgid ""
"The <literal>Dir::State</literal> section has directories that pertain to "
"local state information. <literal>lists</literal> is the directory to place "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:607
+#: apt.conf.5.xml
msgid ""
"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
"information, such as the two package caches <literal>srcpkgcache</literal> "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:617
+#: apt.conf.5.xml
msgid ""
"<literal>Dir::Etc</literal> contains the location of configuration files, "
"<literal>sourcelist</literal> gives the location of the sourcelist and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:623
+#: apt.conf.5.xml
msgid ""
"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
"in lexical order from the directory specified. After this is done then the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:627
+#: apt.conf.5.xml
msgid ""
"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
"Bin::Methods</literal> specifies the location of the method handlers and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:635
+#: apt.conf.5.xml
msgid ""
"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</"
-"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the "
-"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</"
-"filename>."
+"set, all paths will be relative to <literal>RootDir</literal>, "
+"<emphasis>even paths that are specified absolutely</emphasis>. So, for "
+"instance, if <literal>RootDir</literal> is set to <filename>/tmp/staging</"
+"filename> and <literal>Dir::State::status</literal> is set to <filename>/var/"
+"lib/dpkg/status</filename>, then the status file will be looked up in "
+"<filename>/tmp/staging/var/lib/dpkg/status</filename>. If you want to "
+"prefix only relative paths, set <literal>Dir</literal> instead."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:648
+#: apt.conf.5.xml
msgid ""
"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
"which files APT should silently ignore while parsing the files in the "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:657
+#: apt.conf.5.xml
msgid "APT in DSelect"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:659
+#: apt.conf.5.xml
msgid ""
"When APT is used as a &dselect; method several configuration directives "
"control the default behavior. These are in the <literal>DSelect</literal> "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:664
+#: apt.conf.5.xml
msgid ""
"Cache Clean mode; this value may be one of <literal>always</literal>, "
"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:678
+#: apt.conf.5.xml
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the install phase."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:683
+#: apt.conf.5.xml
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the update phase."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:688
+#: apt.conf.5.xml
msgid ""
"If true the [U]pdate operation in &dselect; will always prompt to continue. "
"The default is to prompt only on error."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:694
+#: apt.conf.5.xml
msgid "How APT calls &dpkg;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:695
+#: apt.conf.5.xml
msgid ""
"Several configuration directives control how APT invokes &dpkg;. These are "
"in the <literal>DPkg</literal> section."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:700
+#: apt.conf.5.xml
msgid ""
"This is a list of options to pass to &dpkg;. The options must be specified "
"using the list notation and each list item is passed as a single argument to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:706
+#: apt.conf.5.xml
msgid ""
"This is a list of shell commands to run before/after invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:713
+#: apt.conf.5.xml
msgid ""
"This is a list of shell commands to run before invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:720
+#: apt.conf.5.xml
+msgid ""
+"Version 2 of this protocol sends more information through the requested file "
+"descriptor: a line with the text <literal>VERSION 2</literal>, the APT "
+"configuration space, and a list of package actions with filename and version "
+"information."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Each configuration directive line has the form <literal>key=value</"
+"literal>. Special characters (equal signs, newlines, nonprintable "
+"characters, quotation marks, and percent signs in <literal>key</literal> and "
+"newlines, nonprintable characters, and percent signs in <literal>value</"
+"literal>) are %-encoded. Lists are represented by multiple <literal>key::"
+"=value</literal> lines with the same key. The configuration section ends "
+"with a blank line."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"Package action lines consist of five fields in Version 2: package name "
+"(without architecture qualification even if foreign), old version, direction "
+"of version change (< for upgrades, > for downgrades, = for no change), "
+"new version, action. The version fields are \"-\" for no version at all (for "
+"example when installing a package for the first time; no version is treated "
+"as earlier than any real version, so that is an upgrade, indicated as "
+"<literal>- < 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
+"the package is being configured, \"**REMOVE**\" if it is being removed, or "
+"the filename of a .deb file if it is being unpacked."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 3 adds the architecture and <literal>MultiArch</"
-"literal> flag to each version being dumped."
+"In Version 3 after each version field follows the architecture of this "
+"version, which is \"-\" if there is no version, and a field showing the "
+"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
+"\"none\" is an incorrect typename which is just kept to remain compatible, "
+"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:725
+#: apt.conf.5.xml
msgid ""
"The version of the protocol to be used for the command "
"<literal><replaceable>cmd</replaceable></literal> can be chosen by setting "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:732
+#: apt.conf.5.xml
msgid ""
"The file descriptor to be used to send the information can be requested with "
"<literal>DPkg::Tools::options::<replaceable>cmd</replaceable>::InfoFD</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:742
+#: apt.conf.5.xml
msgid ""
"APT chdirs to this directory before invoking &dpkg;, the default is "
"<filename>/</filename>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:747
+#: apt.conf.5.xml
msgid ""
"These options are passed to &dpkg-buildpackage; when compiling packages; the "
"default is to disable signing and produce all binaries."
msgstr ""
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:752
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:753
-msgid ""
-"APT can call &dpkg; in such a way as to let it make aggressive use of "
-"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
-"use triggers once each time it runs. Activating these options can therefore "
-"decrease the time needed to perform the install or upgrade. Note that it is "
-"intended to activate these options per default in the future, but as it "
-"drastically changes the way APT calls &dpkg; it needs a lot more testing. "
-"<emphasis>These options are therefore currently experimental and should not "
-"be used in production environments.</emphasis> It also breaks progress "
-"reporting such that all front-ends will currently stay around half (or more) "
-"of the time in the 100% state while it actually configures all packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:768
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:762
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them, create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:775
-msgid ""
-"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: &dpkg; will not run the triggers when this flag is present unless it "
-"is explicitly called to do so in an extra call. Note that this option "
-"exists (undocumented) also in older APT versions with a slightly different "
-"meaning: Previously these option only append --no-triggers to the configure "
-"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
-"calls."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:783
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
-"\", which causes APT to configure all packages. The \"<literal>smart</"
-"literal>\" way is to configure only packages which need to be configured "
-"before another package can be unpacked (Pre-Depends), and let the rest be "
-"configured by &dpkg; with a call generated by the ConfigurePending option "
-"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
-"anything, and totally relies on &dpkg; for configuration (which at the "
-"moment will fail if a Pre-Depends is encountered). Setting this option to "
-"any value other than <literal>all</literal> will implicitly also activate "
-"the next option by default, as otherwise the system could end in an "
-"unconfigured and potentially unbootable state."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:798
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
msgid ""
"If this option is set APT will call <command>dpkg --configure --pending</"
"command> to let &dpkg; handle all required configurations and triggers. This "
-"option is activated automatically per default if the previous option is not "
-"set to <literal>all</literal>, but deactivating it could be useful if you "
-"want to run APT multiple times in a row - e.g. in an installer. In these "
-"sceneries you could deactivate this option in all but the last run."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:805
-msgid ""
-"Useful for the <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal>, and "
-"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
-"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
-"process all triggers, not only the triggers needed to configure this package."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:818
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:811
-msgid ""
-"Essential packages (and their dependencies) should be configured immediately "
-"after unpacking. It is a good idea to do this quite early in the upgrade "
-"process as these configure calls also currently require <literal>DPkg::"
-"TriggersPending</literal> which will run quite a few triggers (which may not "
-"be needed). Essentials get per default a high score but the immediate flag "
-"is relatively low (a package which has a Pre-Depends is rated higher). "
-"These option and the others in the same group can be used to change the "
-"scoring. The following example shows the settings with their default "
-"values. <placeholder type=\"literallayout\" id=\"0\"/>"
+"option is activated by default, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In this "
+"scenario you could deactivate this option in all but the last run."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:831
+#: apt.conf.5.xml
msgid "Periodic and Archives options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:832
+#: apt.conf.5.xml
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
-"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
-"for the brief documentation of these options."
+"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of "
+"this script for the brief documentation of these options."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:840
+#: apt.conf.5.xml
msgid "Debug options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:842
+#: apt.conf.5.xml
msgid ""
"Enabling options in the <literal>Debug::</literal> section will cause "
"debugging information to be sent to the standard error stream of the program "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:853
+#: apt.conf.5.xml
msgid ""
"<literal>Debug::pkgProblemResolver</literal> enables output about the "
"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:861
+#: apt.conf.5.xml
msgid ""
"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
"used to run some operations (for instance, <literal>apt-get -s install</"
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:870
+#: apt.conf.5.xml
msgid ""
"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
"time that <literal>apt</literal> invokes &dpkg;."
#. motivating example, except I haven't a clue why you'd want
#. to do this.
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:878
+#: apt.conf.5.xml
msgid ""
"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
"in CD-ROM IDs."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:888
+#: apt.conf.5.xml
msgid "A full list of debugging options to apt follows."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:897
+#: apt.conf.5.xml
msgid ""
"Print information related to accessing <literal>cdrom://</literal> sources."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:908
+#: apt.conf.5.xml
msgid "Print information related to downloading packages using FTP."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:919
+#: apt.conf.5.xml
msgid "Print information related to downloading packages using HTTP."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:930
+#: apt.conf.5.xml
msgid "Print information related to downloading packages using HTTPS."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:941
+#: apt.conf.5.xml
msgid ""
"Print information related to verifying cryptographic signatures using "
"<literal>gpg</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:952
+#: apt.conf.5.xml
msgid ""
"Output information about the process of accessing collections of packages "
"stored on CD-ROMs."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:962
+#: apt.conf.5.xml
msgid "Describes the process of resolving build-dependencies in &apt-get;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:972
+#: apt.conf.5.xml
msgid ""
"Output each cryptographic hash that is generated by the <literal>apt</"
"literal> libraries."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:982
+#: apt.conf.5.xml
msgid ""
"Do not include information from <literal>statfs</literal>, namely the number "
"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:993
+#: apt.conf.5.xml
msgid ""
"Disable all file locking. For instance, this will allow two instances of "
"<quote><literal>apt-get update</literal></quote> to run at the same time."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1005
+#: apt.conf.5.xml
msgid "Log when items are added to or removed from the global download queue."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1015
+#: apt.conf.5.xml
msgid ""
"Output status messages and errors related to verifying checksums and "
"cryptographic signatures of downloaded files."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1025
+#: apt.conf.5.xml
msgid ""
"Output information about downloading and applying package index list diffs, "
"and errors relating to package index list diffs."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1037
+#: apt.conf.5.xml
msgid ""
"Output information related to patching apt package lists when downloading "
"index diffs instead of full indices."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1048
+#: apt.conf.5.xml
msgid ""
"Log all interactions with the sub-processes that actually perform downloads."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1059
+#: apt.conf.5.xml
msgid ""
"Log events related to the automatically-installed status of packages and to "
"the removal of unused packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1069
+#: apt.conf.5.xml
msgid ""
"Generate debug messages describing which packages are being automatically "
"installed to resolve dependencies. This corresponds to the initial auto-"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1083
+#: apt.conf.5.xml
msgid ""
"Generate debug messages describing which packages are marked as keep/install/"
"remove while the ProblemResolver does his work. Each addition or deletion "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1104
+#: apt.conf.5.xml
msgid ""
"When invoking &dpkg;, output the precise command line with which it is being "
"invoked, with arguments separated by a single space character."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1115
+#: apt.conf.5.xml
msgid ""
"Output all the data received from &dpkg; on the status file descriptor and "
"any errors encountered while parsing it."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1126
+#: apt.conf.5.xml
msgid ""
"Generate a trace of the algorithm that decides the order in which "
"<literal>apt</literal> should pass packages to &dpkg;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1138
+#: apt.conf.5.xml
msgid ""
"Output status messages tracing the steps performed when invoking &dpkg;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1149
+#: apt.conf.5.xml
msgid "Output the priority of each package list on startup."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1159
+#: apt.conf.5.xml
msgid ""
"Trace the execution of the dependency resolver (this applies only to what "
"happens when a complex dependency problem is encountered)."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1170
+#: apt.conf.5.xml
msgid ""
"Display a list of all installed packages with their calculated score used by "
"the pkgProblemResolver. The description of the package is the same as "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1182
+#: apt.conf.5.xml
msgid ""
"Print information about the vendors read from <filename>/etc/apt/vendors."
"list</filename>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1192
+#: apt.conf.5.xml
msgid ""
"Display the external commands that are called by apt hooks. This includes e."
"g. the config options <literal>DPkg::{Pre,Post}-Invoke</literal> or "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:1216 apt_preferences.5.xml:547 sources.list.5.xml:239
-#: apt-ftparchive.1.xml:598
+#: apt.conf.5.xml apt_preferences.5.xml sources.list.5.xml apt-ftparchive.1.xml
#, fuzzy
msgid "Examples"
msgstr "Exemplos"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1217
+#: apt.conf.5.xml
msgid ""
"&configureindex; is a configuration file showing example values for all "
"possible options."
#. ? reading apt.conf
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1229
+#: apt.conf.5.xml
#, fuzzy
msgid "&apt-cache;, &apt-config;, &apt-preferences;."
msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt_preferences.5.xml:34
+#: apt_preferences.5.xml
#, fuzzy
msgid "Preference control file for APT"
msgstr "Arquivo de controle de preferências para o APT"
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:39
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The APT preferences file <filename>/etc/apt/preferences</filename> and the "
"para instalação."
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:44
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Several versions of a package may be available for installation when the "
"selecionada para instalação."
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:54
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Several instances of the same version of a package may be available when the "
"a escolha da instância."
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:61
+#: apt_preferences.5.xml
msgid ""
"Preferences are a strong power in the hands of a system administrator but "
"they can become also their biggest nightmare if used without care! APT will "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:72
+#: apt_preferences.5.xml
msgid ""
"Note that the files in the <filename>/etc/apt/preferences.d</filename> "
"directory are parsed in alphanumeric ascending order and need to obey the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:81
+#: apt_preferences.5.xml
#, fuzzy
msgid "APT's Default Priority Assignments"
msgstr "Atribuições de Prioridade Padrão do APT"
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:96
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "<command>apt-get install -t testing <replaceable>some-package</replaceable></command>\n"
msgstr ""
"<command>apt-get install -t testing <replaceable>algum-pacote</replaceable></command>\n"
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:99
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "APT::Default-Release \"stable\";\n"
msgstr ""
"APT::Default-Release \"stable\";\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:83
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"If there is no preferences file or if there is no entry in the file that "
"etc/apt/apt.conf</filename>. Por exemplo,"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:103
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"If the target release has been specified then APT uses the following "
"Atribuirá :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:108
+#: apt_preferences.5.xml
#, fuzzy
msgid "priority 1"
msgstr "prioridade 100"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:109
+#: apt_preferences.5.xml
msgid ""
"to the versions coming from archives which in their <filename>Release</"
"filename> files are marked as \"NotAutomatic: yes\" but <emphasis>not</"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:115
+#: apt_preferences.5.xml
#, fuzzy
msgid "priority 100"
msgstr "prioridade 100"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:116
+#: apt_preferences.5.xml
msgid ""
"to the version that is already installed (if any) and to the versions coming "
"from archives which in their <filename>Release</filename> files are marked "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:123
+#: apt_preferences.5.xml
#, fuzzy
msgid "priority 500"
msgstr "prioridade 500"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:124
+#: apt_preferences.5.xml
#, fuzzy
-msgid ""
-"to the versions that are not installed and do not belong to the target "
-"release."
+msgid "to the versions that do not belong to the target release."
msgstr ""
-"para as instâncias que não estã instaladas e que não pertencem a versão alvo."
+"para as instâncias que não estejam instaladas e pertençam a versão alvo."
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:128
+#: apt_preferences.5.xml
#, fuzzy
msgid "priority 990"
msgstr "prioridade 990"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:129
+#: apt_preferences.5.xml
#, fuzzy
-msgid ""
-"to the versions that are not installed and belong to the target release."
+msgid "to the versions that belong to the target release."
msgstr ""
"para as instâncias que não estejam instaladas e pertençam a versão alvo."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:134
+#: apt_preferences.5.xml
+msgid ""
+"The highest of those priorities whose description matches the version is "
+"assigned to the version."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"If the target release has not been specified then APT simply assigns "
"prioridade 500 para todas as instâncias de pacotes não instaladas."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:141
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"APT then applies the following rules, listed in order of precedence, to "
"determinar qual instância de um pacote instalar."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:144
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Never downgrade unless the priority of an available version exceeds 1000. "
"\"downgrade\" pode ser arriscado.)"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:150
+#: apt_preferences.5.xml
#, fuzzy
msgid "Install the highest priority version."
msgstr "Instala a instância de prioridade mais alta."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:151
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"If two or more versions have the same priority, install the most recent one "
"mais recente (ou seja, aquela com o maior número de versão)."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:154
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"If two or more versions have the same priority and version number but either "
"<literal>--reinstall</literal> seja fornecida, instala aquela desinstalada."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:160
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"In a typical situation, the installed version of a package (priority 100) "
"forem executados."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:167
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"More rarely, the installed version of a package is <emphasis>more</emphasis> "
"upgrade</command> forem executados."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:172
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Sometimes the installed version of a package is more recent than the version "
"disponíveis possuir uma prioridade maior do que a versão instalada."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:181
+#: apt_preferences.5.xml
#, fuzzy
msgid "The Effect of APT Preferences"
msgstr "O Efeito das Preferências do APT"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:183
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The APT preferences file allows the system administrator to control the "
"das duas formas, uma forma específica e uma forma geral."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:189
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The specific form assigns a priority (a \"Pin-Priority\") to one or more "
"com \"<literal>5.8</literal>\"."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:196
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: perl\n"
"Pin-Priority: 1001\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:202
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The general form assigns a priority to all of the package versions in a "
"identificado pelo nome de domínio totalmente qualificado do site Internet."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:208
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"This general-form entry in the APT preferences file applies only to groups "
"no site local."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:213
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
"Pin-Priority: 999\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:218
+#: apt_preferences.5.xml
msgid ""
"A note of caution: the keyword used here is \"<literal>origin</literal>\" "
"which can be used to match a hostname. The following record will assign a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:222
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
"Pin-Priority: 999\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:226
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"This should <emphasis>not</emphasis> be confused with the Origin of a "
"como \"Debian\" ou \"Ximian\"."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:231
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following record assigns a low priority to all package versions "
"\"<literal>unstable</literal>\"."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:235
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
"Pin-Priority: 50\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:240
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following record assigns a high priority to all package versions "
-"belonging to any distribution whose Codename is \"<literal>&testing-codename;"
-"</literal>\"."
+"belonging to any distribution whose Codename is \"<literal>&debian-testing-"
+"codename;</literal>\"."
msgstr ""
"O registro a seguir atribui uma prioridade baixa para todas as versões de "
"pacote que pertençam a qualquer distribuição cujo nome do Repositório seja "
"\"<literal>unstable</literal>\"."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:244
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
msgstr ""
"<programlisting>\n"
"Pin-Priority: 50\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:249
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following record assigns a high priority to all package versions "
"belonging to any release whose Archive name is \"<literal>stable</literal>\" "
-"and whose release Version number is \"<literal>&stable-version;</literal>\"."
+"and whose release Version number is \"<literal>&debian-stable-version;</"
+"literal>\"."
msgstr ""
"O registro a seguir atribui uma prioridade alta para todas as versões de "
"pacotes que pertençam a qualquer versão cujo nome do Repositório seja "
"literal>\"."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:254
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
-"Pin: release a=stable, v=&stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
"Pin-Priority: 500\n"
msgstr ""
"<programlisting>\n"
"Pin: release a=unstable, v=3.0\n"
"Pin-Priority: 50\n"
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The effect of the comma operator is similar to an \"and\" in logic: All "
+"conditions must be satisfied for the pin to match. There is one exception: "
+"For any type of condition (such as two \"a\" conditions), only the last such "
+"condition is checked."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:264
+#: apt_preferences.5.xml
msgid "Regular expressions and &glob; syntax"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:266
+#: apt_preferences.5.xml
msgid ""
"APT also supports pinning by &glob; expressions, and regular expressions "
"surrounded by slashes. For example, the following example assigns the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:275
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: gnome* /kde/\n"
-"Pin: release n=experimental\n"
+"Pin: release a=experimental\n"
"Pin-Priority: 500\n"
msgstr ""
"<programlisting>\n"
"Pin-Priority: 50\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:281
+#: apt_preferences.5.xml
msgid ""
"The rule for those expressions is that they can occur anywhere where a "
"string can occur. Thus, the following pin assigns the priority 990 to all "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:287
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
"Pin-Priority: 50\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:293
+#: apt_preferences.5.xml
msgid ""
"If a regular expression occurs in a <literal>Package</literal> field, the "
"behavior is the same as if this regular expression were replaced with a list "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:309
+#: apt_preferences.5.xml
#, fuzzy
msgid "How APT Interprets Priorities"
msgstr "Como o APT Interpreta Prioridades"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:312
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Priorities (P) assigned in the APT preferences file must be positive or "
"seguir (a grosso modo):"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:317
+#: apt_preferences.5.xml
msgid "P >= 1000"
msgstr "P >= 1000"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:318
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"causes a version to be installed even if this constitutes a downgrade of the "
"dowgrade do pacote"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:322
+#: apt_preferences.5.xml
msgid "990 <= P < 1000"
msgstr "990 <= P < 1000"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:323
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"causes a version to be installed even if it does not come from the target "
"versão alvo, a menos que a versão instalada seja mais recente"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:328
+#: apt_preferences.5.xml
msgid "500 <= P < 990"
msgstr "500 <= P < 990"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:329
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"causes a version to be installed unless there is a version available "
"disponível pertencente a versão alvo ou a versão instalada seja mais recente"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:334
+#: apt_preferences.5.xml
msgid "100 <= P < 500"
msgstr "100 <= P < 500"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:335
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"causes a version to be installed unless there is a version available "
"seja mais recente"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:340
+#: apt_preferences.5.xml
msgid "0 < P < 100"
msgstr "0 < P < 100"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:341
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"causes a version to be installed only if there is no installed version of "
"instalada do pacote"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:345
+#: apt_preferences.5.xml
msgid "P < 0"
msgstr "P < 0"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:346
+#: apt_preferences.5.xml
#, fuzzy
msgid "prevents the version from being installed"
msgstr "impede a versão de ser instalada"
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
+#: apt_preferences.5.xml
+msgid "P = 0"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
+#: apt_preferences.5.xml
+msgid "has undefined behaviour, do not use it."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:351
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
-"If any specific-form records match an available package version then the "
-"first such record determines the priority of the package version. Failing "
-"that, if any general-form records match an available package version then "
-"the first such record determines the priority of the package version."
+"The first specific-form record matching an available package version "
+"determines the priority of the package version. Failing that, the priority "
+"of the package is defined as the maximum of all priorities defined by "
+"generic-form records matching the version. Records defined using patterns "
+"in the Pin field other than \"*\" are treated like specific-form records."
msgstr ""
"Caso um dos registro de forma específica descritos acima case (match) com "
"uma versão disponível do pacote então o primeiro desses registros "
"determinará a prioridade da versão do pacote."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:357
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"For example, suppose the APT preferences file contains the three records "
"registros apresentados anteriormente :"
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:361
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: perl\n"
"Pin-Priority: 50\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:374
+#: apt_preferences.5.xml
msgid "Then:"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:376
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The most recent available version of the <literal>perl</literal> package "
"será feito um downgrade do <literal>perl</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:381
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"A version of any package other than <literal>perl</literal> that is "
"mesmo versões pertencentes a versão alvo."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:385
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"A version of a package whose origin is not the local system but some other "
"instalada."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:395
+#: apt_preferences.5.xml
#, fuzzy
msgid "Determination of Package Version and Distribution Properties"
msgstr "Determinação da Versão do Pacote e Propriedades da Distribuição"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:397
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The locations listed in the &sources-list; file should provide "
"os pacotes disponíveis nessas localidades."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:401
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The <filename>Packages</filename> file is normally found in the directory "
"do APT :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:409
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Package:</literal> line"
msgstr "a linha <literal>Package:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:410
+#: apt_preferences.5.xml
#, fuzzy
msgid "gives the package name"
msgstr "informa o nome do pacote"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:413 apt_preferences.5.xml:463
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Version:</literal> line"
msgstr "a linha <literal>Version:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:414
+#: apt_preferences.5.xml
#, fuzzy
msgid "gives the version number for the named package"
msgstr "informa o número de versão do pacote"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:419
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The <filename>Release</filename> file is normally found in the directory "
"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for "
"example, <filename>.../dists/stable/Release</filename>, or <filename>.../"
-"dists/&stable-codename;/Release</filename>. It consists of a single multi-"
-"line record which applies to <emphasis>all</emphasis> of the packages in the "
-"directory tree below its parent. Unlike the <filename>Packages</filename> "
-"file, nearly all of the lines in a <filename>Release</filename> file are "
-"relevant for setting APT priorities:"
+"dists/&debian-stable-codename;/Release</filename>. It consists of a single "
+"multi-line record which applies to <emphasis>all</emphasis> of the packages "
+"in the directory tree below its parent. Unlike the <filename>Packages</"
+"filename> file, nearly all of the lines in a <filename>Release</filename> "
+"file are relevant for setting APT priorities:"
msgstr ""
"O arquivo <filename>Release</filename> é normalmente encontrado no diretório "
"<filename>.../dists/<replaceable>nome-distribuição</replaceable></"
"do APT :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:430
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line"
msgstr "a linha <literal>Archive:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:431
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the archive to which all the packages in the directory tree belong. "
"requerer a linha :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:441
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "Pin: release a=stable\n"
msgstr ""
"Pin: release a=stable\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:447
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Codename:</literal> line"
msgstr "a linha <literal>Component:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:448
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the codename to which all the packages in the directory tree belong. "
-"For example, the line \"Codename: &testing-codename;\" specifies that all of "
-"the packages in the directory tree below the parent of the "
-"<filename>Release</filename> file belong to a version named "
-"<literal>&testing-codename;</literal>. Specifying this value in the APT "
-"preferences file would require the line:"
+"For example, the line \"Codename: &debian-testing-codename;\" specifies that "
+"all of the packages in the directory tree below the parent of the "
+"<filename>Release</filename> file belong to a version named <literal>&debian-"
+"testing-codename;</literal>. Specifying this value in the APT preferences "
+"file would require the line:"
msgstr ""
"dá nome ao repositório para o qual todos os pacotes na àrvore de diretório "
"pertencem. Por exemplo, a linha \"Archive: stable\" especifica que todos os "
"requerer a linha :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:457
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
-msgid "Pin: release n=&testing-codename;\n"
+msgid "Pin: release n=&debian-testing-codename;\n"
msgstr ""
"<programlisting>\n"
"Pin: release a=stable\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:464
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the release version. For example, the packages in the tree might "
-"belong to Debian release version &stable-version;. Note that there is "
-"normally no version number for the <literal>testing</literal> and "
+"belong to Debian release version &debian-stable-version;. Note that there "
+"is normally no version number for the <literal>testing</literal> and "
"<literal>unstable</literal> distributions because they have not been "
"released yet. Specifying this in the APT preferences file would require one "
"of the following lines."
"linhas a seguir."
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:473
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
-"Pin: release v=&stable-version;\n"
-"Pin: release a=stable, v=&stable-version;\n"
-"Pin: release &stable-version;\n"
+"Pin: release v=&debian-stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
+"Pin: release &debian-stable-version;\n"
msgstr ""
"<programlisting>\n"
"Pin: release v=3.0\n"
"Pin: release 3.0\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:482
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Component:</literal> line"
msgstr "a linha <literal>Component:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:483
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the licensing component associated with the packages in the directory "
"requerer a linha :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:492
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "Pin: release c=main\n"
msgstr ""
"Pin: release c=main\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:498
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Origin:</literal> line"
msgstr "a linha <literal>Origin:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:499
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the originator of the packages in the directory tree of the "
"requerer a linha :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:505
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "Pin: release o=Debian\n"
msgstr ""
"Pin: release o=Debian\n"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:511
+#: apt_preferences.5.xml
#, fuzzy
msgid "the <literal>Label:</literal> line"
msgstr "a linha <literal>Label:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:512
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"names the label of the packages in the directory tree of the "
"arquivo de preferências do APT iria requerer a linha :"
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:518
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "Pin: release l=Debian\n"
msgstr ""
"Pin: release l=Debian\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:525
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"All of the <filename>Packages</filename> and <filename>Release</filename> "
"<literal>unstable</literal>."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:538
+#: apt_preferences.5.xml
#, fuzzy
msgid "Optional Lines in an APT Preferences Record"
msgstr "Linhas Opcionais em um Registro de Preferências do APT"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:540
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"Each record in the APT preferences file can optionally begin with one or "
"</literal>. Isto oferece um local para inserir comentários."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:549
+#: apt_preferences.5.xml
#, fuzzy
msgid "Tracking Stable"
msgstr "Acompanhando a Stable"
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:557
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Explanation: Uninstall or do not install any Debian-originated\n"
"Pin-Priority: -10\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:551
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following APT preferences file will cause APT to assign a priority "
"outras distribuições <literal>Debian</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:574 apt_preferences.5.xml:620
-#: apt_preferences.5.xml:678
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"apt-get install <replaceable>package-name</replaceable>\n"
"apt-get dist-upgrade\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:569
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"ulítma(s) versão(ôes) <literal>stable</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:586
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/testing\n"
msgstr ""
"apt-get install <replaceable>pacote</replaceable>/testing\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:580
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"atualizado novamente a menos que esse comando seja executado novamente."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:592
+#: apt_preferences.5.xml
#, fuzzy
msgid "Tracking Testing or Unstable"
msgstr "Acompanhando a Testing"
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:601
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Package: *\n"
"Pin-Priority: -10\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:594
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following APT preferences file will cause APT to assign a high priority "
"versões de pacotes de outras distribuições <literal>Debian</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:615
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"a(s) última(s) versão(ões) <literal>testing</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:635
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/unstable\n"
msgstr ""
"apt-get install <replaceable>pacote</replaceable>/unstable\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:626
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"recente que a versão instalada."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:642
+#: apt_preferences.5.xml
msgid "Tracking the evolution of a codename release"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:656
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid ""
"Explanation: Uninstall or do not install any Debian-originated package versions\n"
-"Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n"
+"Explanation: other than those in the distribution codenamed with &debian-testing-codename; or sid\n"
"Package: *\n"
-"Pin: release n=&testing-codename;\n"
+"Pin: release n=&debian-testing-codename;\n"
"Pin-Priority: 900\n"
"\n"
"Explanation: Debian unstable is always codenamed with sid\n"
"Pin-Priority: -10\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:644
+#: apt_preferences.5.xml
msgid ""
"The following APT preferences file will cause APT to assign a priority "
"higher than the default (500) to all package versions belonging to a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:673
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"the following commands will cause APT to upgrade to the latest version(s) in "
-"the release codenamed with <literal>&testing-codename;</literal>. "
+"the release codenamed with <literal>&debian-testing-codename;</literal>. "
"<placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
"Com um arquivo &sources-list; apropriado e o arquivo de preferências acima, "
"ulítma(s) versão(ôes) <literal>stable</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:693
+#: apt_preferences.5.xml
#, fuzzy, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/sid\n"
msgstr ""
"apt-get install <replaceable>pacote</replaceable>/testing\n"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:684
+#: apt_preferences.5.xml
#, fuzzy
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"latest version from the <literal>sid</literal> distribution. Thereafter, "
"<command>apt-get upgrade</command> will upgrade the package to the most "
-"recent <literal>&testing-codename;</literal> version if that is more recent "
-"than the installed version, otherwise, to the most recent <literal>sid</"
-"literal> version if that is more recent than the installed version. "
-"<placeholder type=\"programlisting\" id=\"0\"/>"
+"recent <literal>&debian-testing-codename;</literal> version if that is more "
+"recent than the installed version, otherwise, to the most recent "
+"<literal>sid</literal> version if that is more recent than the installed "
+"
version. <placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
"O comando a seguir fará com que o APT atualize o pacote especificado para a "
"última versão da distribuição <literal>unstable</literal>. Assim, o comando "
"recente que a versão instalada."
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:708
+#: apt_preferences.5.xml
#, fuzzy
msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: sources.list.5.xml:35
+#: sources.list.5.xml
msgid "List of configured APT data sources"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:40
+#: sources.list.5.xml
msgid ""
-"The source list <filename>/etc/apt/sources.list</filename> is designed to "
-"support any number of active sources and a variety of source media. The file "
-"lists one source per line, with the most preferred source listed first. The "
-"information available from the configured sources is acquired by "
-"<command>apt-get update</command> (or by an equivalent command from another "
-"APT front-end)."
+"The source list <filename>/etc/apt/sources.list</filename> and the files "
+"contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
+"support any number of active sources and a variety of source media. The "
+"files list one source per line (one-line style) or contain multiline stanzas "
+"defining one or more sources per stanza (deb822 style), with the most "
+"preferred source listed first (in case a single version is available from "
+"more than one source). The information available from the configured sources "
+"is acquired by <command>apt-get update</command> (or by an equivalent "
+"command from another APT front-end)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "sources.list.d"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:47
+#: sources.list.5.xml
msgid ""
-"Each line specifying a source starts with type (e.g. <literal>deb-src</"
+"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
+"add sources.list entries in separate files. Two different file formats are "
+"allowed as described in the next two sections. Filenames need to have "
+"either the extension <filename>.list</filename> or <filename>.sources</"
+"filename> depending on the contained format. The filenames may only contain "
+"letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and period "
+"(.) characters. Otherwise APT will print a notice that it has ignored a "
+"file, unless that file matches a pattern in the <literal>Dir::Ignore-Files-"
+"Silently</literal> configuration list - in which case it will be silently "
+"ignored."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "One-Line-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.list</filename>. Each "
+"line specifying a source starts with a type (e.g. <literal>deb-src</"
"literal>) followed by options and arguments for this type. Individual "
"entries cannot be continued onto a following line. Empty lines are ignored, "
"and a <literal>#</literal> character anywhere on a line marks the remainder "
-"of that line as a comment."
+"of that line as a comment. Consequently an entry can be disabled by "
+"commenting out the entire line. If options should be provided they are "
+"separated by spaces and all of them together are enclosed by square brackets "
+"(<literal>[]</literal>) included in the line after the type separated from "
+"it with a space. If an option allows multiple values these are separated "
+"from each other with a comma (<literal>,</literal>). An option name is "
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is the traditional format and supported by all apt versions. Note that "
+"not all options as described below are supported by all apt versions. Note "
+"also that some older applications parsing this format on their own might not "
+"expect to encounter options as they were uncommon before the introduction of "
+"multi-architecture support."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:55
-msgid "sources.list.d"
+#: sources.list.5.xml
+msgid "deb822-Style Format"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:56
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.sources</filename>. The "
+"format is similar in syntax to other files used by Debian and its "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package. Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "
+"usually easier to add the field \"Enabled: no\" to the stanza to disable the "
+"entry. Removing the field or setting it to yes reenables it. Options have "
+"the same syntax as every other field: A fieldname separated by a colon "
+"(<literal>:</literal>) and optionally spaces from its value(s). Note "
+"especially that multiple values are separated by spaces, not by commas as in "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "
+"also have <literal>Architectures-Add</literal> and <literal>Architectures-"
+"Remove</literal> to modify the default value rather than replacing it."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
msgid ""
-"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
-"add sources.list entries in separate files. The format is the same as for "
-"the regular <filename>sources.list</filename> file. File names need to end "
-"with <filename>.list</filename> and may only contain letters (a-z and A-Z), "
-"digits (0-9), underscore (_), hyphen (-) and period (.) characters. "
-"Otherwise APT will print a notice that it has ignored a file, unless that "
-"file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
-"configuration list - in which case it will be silently ignored."
+"This is a new format supported by apt itself since version 1.1. Previous "
+"versions ignore such files with a notice message as described earlier. It "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "
+"sources and/or options are involved. Developers who are working with and/or "
+"parsing apt sources are highly encouraged to add support for this format and "
+"to contact the APT team to coordinate and share this work. Users can freely "
+"adopt this format already, but may encounter problems with software not "
+"supporting the format yet."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:67
-msgid "The deb and deb-src types"
+#: sources.list.5.xml
+msgid "The deb and deb-src Types: General Format"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:68
+#: sources.list.5.xml
msgid ""
"The <literal>deb</literal> type references a typical two-level Debian "
"archive, <filename>distribution/component</filename>. The "
-"<literal>distribution</literal> is generally an archive name like "
+"<literal>distribution</literal> is generally a suite name like "
"<literal>stable</literal> or <literal>testing</literal> or a codename like "
-"<literal>&stable-codename;</literal> or <literal>&testing-codename;</"
-"literal> while component is one of <literal>main</literal>, "
+"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-"
+"codename;</literal> while component is one of <literal>main</literal>, "
"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
"src</literal> type references a Debian distribution's source code in the "
"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:79
+#: sources.list.5.xml
msgid ""
-"The format for a <filename>sources.list</filename> entry using the "
-"<literal>deb</literal> and <literal>deb-src</literal> types is:"
+"The format for two one-line-style entries using the <literal>deb</literal> "
+"and <literal>deb-src</literal> types is:"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:82
+#: sources.list.5.xml
#, no-wrap
-msgid "deb [ options ] uri suite [component1] [component2] [...]"
+msgid ""
+"deb [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]\n"
+"deb-src [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]"
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: sources.list.5.xml:86
+#: sources.list.5.xml
#, no-wrap
msgid ""
" Types: deb deb-src\n"
-" URIs: http://example.com\n"
-" Suites: stable testing\n"
-" Sections: component1 component2\n"
-" Description: short\n"
-" long long long\n"
-" [option1]: [option1-value]\n"
-"\n"
-" Types: deb\n"
-" URIs: http://another.example.com\n"
-" Suites: experimental\n"
-" Sections: component1 component2\n"
-" Enabled: no\n"
-" Description: short\n"
-" long long long\n"
-" [option1]: [option1-value]\n"
+" URIs: uri\n"
+" Suites: suite\n"
+" Components: [component1] [component2] [...]\n"
+" option1: value1\n"
+" option2: value2\n"
" "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:84
+#: sources.list.5.xml
msgid ""
-"Alternatively a rfc822 style format is also supported: <placeholder type="
-"\"literallayout\" id=\"0\"/>"
+"Alternatively the equivalent entry in deb822 style looks like this: "
+"<placeholder type=\"literallayout\" id=\"0\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:105
+#: sources.list.5.xml
msgid ""
"The URI for the <literal>deb</literal> type must specify the base of the "
"Debian distribution, from which APT will find the information it needs. "
"<literal>suite</literal> can specify an exact path, in which case the "
"components must be omitted and <literal>suite</literal> must end with a "
"slash (<literal>/</literal>). This is useful for the case when only a "
-"particular sub-section of the archive denoted by the URI is of interest. If "
-"<literal>suite</literal> does not specify an exact path, at least one "
+"particular sub-directory of the archive denoted by the URI is of interest. "
+"If <literal>suite</literal> does not specify an exact path, at least one "
"<literal>component</literal> must be present."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:114
+#: sources.list.5.xml
msgid ""
"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
"literal> which expands to the Debian architecture (such as <literal>amd64</"
"literal> or <literal>armel</literal>) used on the system. This permits "
"architecture-independent <filename>sources.list</filename> files to be used. "
-"In general this is only of interest when specifying an exact path, "
+"In general this is only of interest when specifying an exact path; "
"<literal>APT</literal> will automatically generate a URI with the current "
"architecture otherwise."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:122
+#: sources.list.5.xml
msgid ""
-"In the traditional style sources.list format since only one distribution can "
-"be specified per line it may be necessary to have multiple lines for the "
-"same URI, if a subset of all available distributions or components at that "
+"Especially in the one-line-style format since only one distribution can be "
+"specified per line it may be necessary to have multiple lines for the same "
+"URI, if a subset of all available distributions or components at that "
"location is desired. APT will sort the URI list after it has generated a "
"complete set internally, and will collapse multiple references to the same "
"Internet host, for instance, into a single connection, so that it does not "
-"inefficiently establish an FTP connection, close it, do something else, and "
-"then re-establish a connection to that same host. This feature is useful for "
-"accessing busy FTP sites with limits on the number of simultaneous anonymous "
-"users. APT also parallelizes connections to different hosts to more "
-"effectively deal with sites with low bandwidth."
+"inefficiently establish a connection, close it, do something else, and then "
+"re-establish a connection to that same host. APT also parallelizes "
+"connections to different hosts to more effectively deal with sites with low "
+"bandwidth."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-list-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-sources-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "The deb and deb-src types: Options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:136
+#: sources.list.5.xml
msgid ""
-"<literal>options</literal> is always optional and needs to be surrounded by "
-"square brackets. It can consist of multiple settings in the form "
-"<literal><replaceable>setting</replaceable>=<replaceable>value</"
-"replaceable></literal>. Multiple settings are separated by spaces. The "
-"following settings are supported by APT (note however that unsupported "
-"settings will be ignored silently):"
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
+"the option to modify them based on the default, but we aren't listing those "
+"names explicitly here. Unsupported options are silently ignored by all APT "
+"versions."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:142
+#: sources.list.5.xml
msgid ""
-"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
-"replaceable>,…</literal> can be used to specify for which architectures "
-"information should be downloaded. If this option is not set all "
-"architectures defined by the <literal>APT::Architectures</literal> option "
-"will be downloaded."
+"<option>Architectures</option> (<option>arch</option>) is a multivalue "
+"option defining for which architectures information should be downloaded. If "
+"this option isn't set the default is all architectures as defined by the "
+"<option>APT::Architectures</option> config option."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:146
+#: sources.list.5.xml
msgid ""
-"<literal>arch+=<replaceable>arch1</replaceable>,<replaceable>arch2</"
-"replaceable>,…</literal> and <literal>arch-=<replaceable>arch1</replaceable>,"
-"<replaceable>arch2</replaceable>,…</literal> which can be used to add/remove "
-"architectures from the set which will be downloaded."
+"<option>Languages</option> (<option>lang</option>) is a multivalue option "
+"defining for which languages information such as translated package "
+"descriptions should be downloaded. If this option isn't set the default is "
+"all languages as defined by the <option>Acquire::Languages</option> config "
+"option."
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:149
+#: sources.list.5.xml
msgid ""
-"<literal>trusted=yes</literal> can be set to indicate that packages from "
-"this source are always authenticated even if the <filename>Release</"
-"filename> file is not signed or the signature can't be checked. This "
-"disables parts of &apt-secure; and should therefore only be used in a local "
-"and trusted context. <literal>trusted=no</literal> is the opposite which "
-"handles even correctly authenticated sources as not authenticated."
+"<option>Targets</option> (<option>target</option>) is a multivalue option "
+"defining which download targets apt will try to acquire from this source. If "
+"not specified, the default set is defined by the <option>Acquire::"
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
msgstr ""
-#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:156
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
msgid ""
-"It is important to list sources in order of preference, with the most "
-"preferred source listed first. Typically this will result in sorting by "
-"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
-"followed by distant Internet hosts, for example)."
+"<option>PDiffs</option> (<option>pdiffs</option>) is a yes/no value which "
+"controls if APT should try to use PDiffs to update old indexes instead of "
+"downloading the new indexes entirely. The value of this option is ignored if "
+"the repository doesn't announce the availability of PDiffs. Defaults to the "
+"value of the option with the same name for a specific index file defined in "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
+"the value of configuration option <option>Acquire::PDiffs</option> which "
+"defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
+"activates/disables the use of this feature if this source indicates support "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
+"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:161
-#, fuzzy
-msgid "Some examples:"
-msgstr "Exemplos"
+#: sources.list.5.xml
+msgid ""
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
+"sources with the same URI and Suite, so they have to be set on all such "
+"entries and can not be varied between different components. APT will try to "
+"detect and error out on such anomalies."
+msgstr ""
-#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:163
-#, no-wrap
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
msgid ""
-"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
-"deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n"
-" "
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Signed-By</option> (<option>signed-by</option>) is either an "
+"absolute path to a keyring file (has to be accessible and readable for the "
+"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
+"filename> directory (see <command>apt-key fingerprint</command>). If the "
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
+"a yes/no value which controls if APT should try to detect replay attacks. A "
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Valid-Until-Min</option> (<option>valid-until-min</option>) and "
+"<option>Valid-Until-Max</option> (<option>valid-until-max</option>) can be "
+"used to raise or lower the time period in seconds in which the data from "
+"this repository is considered valid. -Max can be especially useful if the "
+"repository provides no Valid-Until field on its Release file to set your own "
+"value, while -Min can be used to increase the valid time on seldom updated "
+"(local) mirrors of a more frequently updated but less accessible archive "
+"(which is in the sources.list as well) instead of disabling the check "
+"entirely. Default to the value of the configuration options "
+"<option>Acquire::Min-ValidTime</option> and <option>Acquire::Max-ValidTime</"
+"option> which are both unset by default."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:169
-msgid "URI specification"
+#: sources.list.5.xml
+msgid "URI Specification"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:171
+#: sources.list.5.xml
msgid "The currently recognized URI types are:"
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:175
+#: sources.list.5.xml
msgid ""
"The file scheme allows an arbitrary directory in the file system to be "
"considered an archive. This is useful for NFS mounts and local mirrors or "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:182
+#: sources.list.5.xml
msgid ""
"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
"Use the &apt-cdrom; program to create cdrom entries in the source list."
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:189
+#: sources.list.5.xml
msgid ""
"The http scheme specifies an HTTP server for the archive. If an environment "
"variable <envar>http_proxy</envar> is set with the format http://server:"
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:200
+#: sources.list.5.xml
msgid ""
"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
"is highly configurable; for more information see the &apt-conf; manual page. "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:212
+#: sources.list.5.xml
msgid ""
"The copy scheme is identical to the file scheme except that packages are "
"copied into the cache directory instead of used directly at their location. "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:219
+#: sources.list.5.xml
msgid ""
"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
"the files as a given user. Prior configuration of rhosts or RSA keys is "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: sources.list.5.xml:226
+#: sources.list.5.xml
msgid "adding more recognizable URI types"
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:228
+#: sources.list.5.xml
msgid ""
"APT can be extended with more methods shipped in other optional packages, "
"which should follow the naming scheme <package>apt-transport-"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:240
+#: sources.list.5.xml
msgid ""
-"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for "
+"Uses the archive stored locally (or NFS mounted) at /home/apt/debian for "
"stable/main, stable/contrib, and stable/non-free."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:242
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian stable main contrib non-free"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
#, no-wrap
-msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:244
+#: sources.list.5.xml
msgid "As above, except this uses the unstable (development) distribution."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:245
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian unstable main contrib non-free"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
#, no-wrap
-msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:247
-msgid "Source line for the above"
+#: sources.list.5.xml
+msgid "Sources specification for the above."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:248
+#: sources.list.5.xml
#, no-wrap
-msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgid "deb-src file:/home/apt/debian unstable main contrib non-free"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:250
+#: sources.list.5.xml
msgid ""
"The first line gets package information for the architectures in "
"<literal>APT::Architectures</literal> while the second always retrieves "
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:252
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
#, no-wrap
msgid ""
-"deb http://ftp.debian.org/debian &stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:255
+#: sources.list.5.xml
msgid ""
"Uses HTTP to access the archive at archive.debian.org, and uses only the "
"hamm/main area."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:257
+#: sources.list.5.xml
#, no-wrap
msgid "deb http://archive.debian.org/debian-archive hamm main"
msgstr ""
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:259
+#: sources.list.5.xml
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
-"directory, and uses only the &stable-codename;/contrib area."
+"directory, and uses only the &debian-stable-codename;/contrib area."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:261
+#: sources.list.5.xml
#, no-wrap
-msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:263
+#: sources.list.5.xml
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
"directory, and uses only the unstable/contrib area. If this line appears as "
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:267
+#: sources.list.5.xml
#, no-wrap
msgid "deb ftp://ftp.debian.org/debian unstable contrib"
msgstr ""
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: sources.list.5.xml:276
+#: sources.list.5.xml
#, no-wrap
msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
msgstr ""
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:269
+#: sources.list.5.xml
msgid ""
"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
"directory, and uses only files found under <filename>unstable/binary-i386</"
"amd64, and so forth for other supported architectures. [Note this example "
"only illustrates how to use the substitution variable; official debian "
"archives are not structured like this] <placeholder type=\"literallayout\" "
-"id=\"0\"/>"
+"id=\"0\"/> <placeholder type=\"literallayout\" id=\"1\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:281
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to get binary packages as well as sources from the stable, testing "
+"and unstable suites and the components main and contrib."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb deb-src\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: stable testing unstable\n"
+"Components: main contrib\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
#, fuzzy
-msgid "&apt-cache; &apt-conf;"
+msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt-extracttemplates.1.xml:28 apt-sortpkgs.1.xml:28 apt-ftparchive.1.xml:28
+#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
msgid "1"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-extracttemplates.1.xml:35
+#: apt-extracttemplates.1.xml
msgid ""
"Utility to extract <command>debconf</command> config and templates from "
"Debian packages"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:41
+#: apt-extracttemplates.1.xml
msgid ""
"<command>apt-extracttemplates</command> will take one or more Debian package "
"files as input and write out (to a temporary directory) all associated "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:46
+#: apt-extracttemplates.1.xml
msgid "package version template-file config-script"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:47
+#: apt-extracttemplates.1.xml
msgid ""
"template-file and config-script are written to the temporary directory "
"specified by the <option>-t</option> or <option>--tempdir</option> "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-extracttemplates.1.xml:60
+#: apt-extracttemplates.1.xml
msgid ""
"Temporary directory in which to write extracted <command>debconf</command> "
"template files and config scripts. Configuration Item: <literal>APT::"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:77
+#: apt-extracttemplates.1.xml
msgid ""
"<command>apt-extracttemplates</command> returns zero on normal operation, "
"decimal 100 on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-sortpkgs.1.xml:35
+#: apt-sortpkgs.1.xml
msgid "Utility to sort package index files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:41
+#: apt-sortpkgs.1.xml
msgid ""
"<command>apt-sortpkgs</command> will take an index file (source index or "
"package index) and sort the records so that they are ordered by the package "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:47
+#: apt-sortpkgs.1.xml
msgid ""
"All output is sent to standard output; the input must be a seekable file."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-sortpkgs.1.xml:56
+#: apt-sortpkgs.1.xml
msgid ""
"Use source index field ordering. Configuration Item: <literal>APT::"
"SortPkgs::Source</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:70
+#: apt-sortpkgs.1.xml
msgid ""
"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
"100 on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-ftparchive.1.xml:35
+#: apt-ftparchive.1.xml
msgid "Utility to generate index files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:41
+#: apt-ftparchive.1.xml
msgid ""
"<command>apt-ftparchive</command> is the command line tool that generates "
"the index files that APT uses to access a distribution source. The index "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:45
+#: apt-ftparchive.1.xml
msgid ""
"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
"program, incorporating its entire functionality via the <literal>packages</"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:51
+#: apt-ftparchive.1.xml
msgid ""
"Internally <command>apt-ftparchive</command> can make use of binary "
"databases to cache the contents of a .deb file and it does not rely on any "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:62
+#: apt-ftparchive.1.xml
msgid ""
"The packages command generates a package file from a directory tree. It "
"takes the given directory and recursively searches it for .deb files, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:67 apt-ftparchive.1.xml:91
+#: apt-ftparchive.1.xml
msgid ""
"The option <option>--db</option> can be used to specify a binary caching DB."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:72
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>sources</literal> command generates a source index file from a "
"directory tree. It takes the given directory and recursively searches it "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:77
+#: apt-ftparchive.1.xml
msgid ""
"If an override file is specified then a source override file will be looked "
"for with an extension of .src. The --source-override option can be used to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:84
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>contents</literal> command generates a contents file from a "
"directory tree. It takes the given directory and recursively searches it "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:96
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>release</literal> command generates a Release file from a "
"directory tree. It recursively searches the given directory for uncompressed "
-"<filename>Packages</filename> and <filename>Sources</filename> files and "
-"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
-"<command>lzma</command> as well as <filename>Release</filename> and "
-"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
-"Release::Default-Patterns</literal>). Additional filename patterns can be "
-"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
-"literal>. It then writes to stdout a <filename>Release</filename> file "
-"containing an MD5, SHA1 and SHA256 digest for each file."
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:106
+#: apt-ftparchive.1.xml
msgid ""
"Values for the additional metadata fields in the Release file are taken from "
"the corresponding variables under <literal>APT::FTPArchive::Release</"
-"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
-"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
-"<literal>Architectures</literal>, <literal>Components</literal>, "
-"<literal>Description</literal>."
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:119
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>generate</literal> command is designed to be runnable from a "
"cron script and builds indexes according to the given config file. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:128
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>clean</literal> command tidies the databases used by the given "
"configuration file by removing any records that are no longer necessary."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:134
+#: apt-ftparchive.1.xml
msgid "The Generate Configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:136
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>generate</literal> command uses a configuration file to "
"describe the archives that are going to be generated. It follows the typical "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:144
+#: apt-ftparchive.1.xml
msgid ""
"The generate configuration has four separate sections, each described below."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:146
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "<literal>Dir</literal> Section"
msgstr "a linha <literal>Origin:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:148
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>Dir</literal> section defines the standard directories needed "
"to locate the files required during the generation process. These "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:155
+#: apt-ftparchive.1.xml
msgid ""
"Specifies the root of the FTP archive, in a standard Debian configuration "
"this is the directory that contains the <filename>ls-LR</filename> and dist "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:162
+#: apt-ftparchive.1.xml
msgid "Specifies the location of the override files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:167
+#: apt-ftparchive.1.xml
msgid "Specifies the location of the cache files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:172
+#: apt-ftparchive.1.xml
msgid ""
"Specifies the location of the file list files, if the <literal>FileList</"
"literal> setting is used below."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:178
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "<literal>Default</literal> Section"
msgstr "a linha <literal>Label:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:180
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>Default</literal> section specifies default values, and "
"settings that control the operation of the generator. Other sections may "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:186
+#: apt-ftparchive.1.xml
msgid ""
"Sets the default compression schemes to use for the package index files. It "
-"is a string that contains a space separated list of at least one of: '.' (no "
-"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
-"'. gzip'."
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope. The default for all compression schemes is '. gzip'."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:194
+#: apt-ftparchive.1.xml
msgid ""
"Sets the default list of file extensions that are package files. This "
"defaults to '.deb'."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:200
+#: apt-ftparchive.1.xml
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Sources files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:206
+#: apt-ftparchive.1.xml
msgid ""
"Sets the default list of file extensions that are source files. This "
"defaults to '.dsc'."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:212
+#: apt-ftparchive.1.xml
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Contents files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:218
+#: apt-ftparchive.1.xml
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Translation-en master file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:224
+#: apt-ftparchive.1.xml
msgid ""
"Specifies the number of kilobytes to delink (and replace with hard links) "
"per run. This is used in conjunction with the per-section <literal>External-"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:231
+#: apt-ftparchive.1.xml
msgid ""
"Specifies the mode of all created index files. It defaults to 0644. All "
"index files are set to this mode with no regard to the umask."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:238 apt-ftparchive.1.xml:384
+#: apt-ftparchive.1.xml
msgid ""
"Specifies whether long descriptions should be included in the "
"<filename>Packages</filename> file or split out into a master "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:244
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "<literal>TreeDefault</literal> Section"
msgstr "a linha <literal>Label:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:246
+#: apt-ftparchive.1.xml
msgid ""
"Sets defaults specific to <literal>Tree</literal> sections. All of these "
"variables are substitution variables and have the strings $(DIST), "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:253
+#: apt-ftparchive.1.xml
msgid ""
"Sets the number of kilobytes of contents files that are generated each day. "
"The contents files are round-robined so that over several days they will all "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:260
+#: apt-ftparchive.1.xml
msgid ""
"Controls the number of days a contents file is allowed to be checked without "
"changing. If this limit is passed the mtime of the contents file is updated. "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:271
+#: apt-ftparchive.1.xml
msgid ""
"Sets the top of the .deb directory tree. Defaults to <filename>$(DIST)/"
"$(SECTION)/binary-$(ARCH)/</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:277
+#: apt-ftparchive.1.xml
msgid ""
"Sets the top of the source package directory tree. Defaults to <filename>"
"$(DIST)/$(SECTION)/source/</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:283
+#: apt-ftparchive.1.xml
msgid ""
"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/"
"binary-$(ARCH)/Packages</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:289
+#: apt-ftparchive.1.xml
msgid ""
"Sets the output Sources file. Defaults to <filename>$(DIST)/$(SECTION)/"
"source/Sources</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:295
+#: apt-ftparchive.1.xml
msgid ""
"Sets the output Translation-en master file with the long descriptions if "
"they should be not included in the Packages file. Defaults to <filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:302
+#: apt-ftparchive.1.xml
msgid ""
"Sets the path prefix that causes a symlink to be considered an internal link "
"instead of an external link. Defaults to <filename>$(DIST)/$(SECTION)/</"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:309
+#: apt-ftparchive.1.xml
msgid ""
"Sets the output Contents file. Defaults to <filename>$(DIST)/$(SECTION)/"
"Contents-$(ARCH)</filename>. If this setting causes multiple Packages files "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:318
+#: apt-ftparchive.1.xml
msgid "Sets header file to prepend to the contents output."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:323
+#: apt-ftparchive.1.xml
msgid ""
"Sets the binary cache database to use for this section. Multiple sections "
"can share the same database."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:329
+#: apt-ftparchive.1.xml
msgid ""
"Specifies that instead of walking the directory tree, <command>apt-"
"ftparchive</command> should read the list of files from the given file. "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:336
+#: apt-ftparchive.1.xml
msgid ""
"Specifies that instead of walking the directory tree, <command>apt-"
"ftparchive</command> should read the list of files from the given file. "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:344
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "<literal>Tree</literal> Section"
msgstr "a linha <literal>Label:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:346
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>Tree</literal> section defines a standard Debian file tree "
"which consists of a base directory, then multiple sections in that base "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:351
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>Tree</literal> section takes a scope tag which sets the "
"<literal>$(DIST)</literal> variable and defines the root of the tree (the "
"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a "
-"setting such as <filename>dists/&stable-codename;</filename>."
+"setting such as <filename>dists/&debian-stable-codename;</filename>."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:356
+#: apt-ftparchive.1.xml
msgid ""
"All of the settings defined in the <literal>TreeDefault</literal> section "
"can be used in a <literal>Tree</literal> section as well as three new "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt-ftparchive.1.xml:362
+#: apt-ftparchive.1.xml
#, no-wrap
msgid ""
"for i in Sections do \n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:359
+#: apt-ftparchive.1.xml
msgid ""
"When processing a <literal>Tree</literal> section <command>apt-ftparchive</"
"command> performs an operation similar to: <placeholder type=\"programlisting"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:370
+#: apt-ftparchive.1.xml
msgid ""
"This is a space separated list of sections which appear under the "
"distribution; typically this is something like <literal>main contrib non-"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:377
+#: apt-ftparchive.1.xml
msgid ""
"This is a space separated list of all the architectures that appear under "
"search section. The special architecture 'source' is used to indicate that "
-"this tree has a source archive."
+"this tree has a source archive. The architecture 'all' signals that "
+"architecture specific files like <filename>Packages</filename> should not "
+"include information about architecture <literal>all</literal> packages in "
+"all files as they will be available in a dedicated file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:390
+#: apt-ftparchive.1.xml
msgid ""
"Sets the binary override file. The override file contains section, priority "
"and maintainer address information."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:396
+#: apt-ftparchive.1.xml
msgid ""
"Sets the source override file. The override file contains section "
"information."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:402 apt-ftparchive.1.xml:448
+#: apt-ftparchive.1.xml
msgid "Sets the binary extra override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:407 apt-ftparchive.1.xml:453
+#: apt-ftparchive.1.xml
msgid "Sets the source extra override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:412
+#: apt-ftparchive.1.xml
#, fuzzy
msgid "<literal>BinDirectory</literal> Section"
msgstr "a linha <literal>Component:</literal>"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:414
+#: apt-ftparchive.1.xml
msgid ""
"The <literal>bindirectory</literal> section defines a binary directory tree "
"with no special structure. The scope tag specifies the location of the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:422
+#: apt-ftparchive.1.xml
msgid "Sets the Packages file output."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:427
+#: apt-ftparchive.1.xml
msgid ""
"Sets the Sources file output. At least one of <literal>Packages</literal> or "
"<literal>Sources</literal> is required."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:433
+#: apt-ftparchive.1.xml
msgid "Sets the Contents file output (optional)."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:438
+#: apt-ftparchive.1.xml
msgid "Sets the binary override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:443
+#: apt-ftparchive.1.xml
msgid "Sets the source override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:458
+#: apt-ftparchive.1.xml
msgid "Sets the cache DB."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:463
+#: apt-ftparchive.1.xml
msgid "Appends a path to all the output paths."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:468
+#: apt-ftparchive.1.xml
msgid "Specifies the file list file."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:475
+#: apt-ftparchive.1.xml
msgid "The Binary Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:476
+#: apt-ftparchive.1.xml
msgid ""
"The binary override file is fully compatible with &dpkg-scanpackages;. It "
"contains four fields separated by spaces. The first field is the package "
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: apt-ftparchive.1.xml:482
+#: apt-ftparchive.1.xml
#, no-wrap
msgid "old [// oldn]* => new"
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: apt-ftparchive.1.xml:484
+#: apt-ftparchive.1.xml
#, no-wrap
msgid "new"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:481
+#: apt-ftparchive.1.xml
msgid ""
"The general form of the maintainer field is: <placeholder type="
"\"literallayout\" id=\"0\"/> or simply, <placeholder type=\"literallayout\" "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:492
+#: apt-ftparchive.1.xml
msgid "The Source Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:494
+#: apt-ftparchive.1.xml
msgid ""
"The source override file is fully compatible with &dpkg-scansources;. It "
"contains two fields separated by spaces. The first field is the source "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:499
+#: apt-ftparchive.1.xml
msgid "The Extra Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:501
+#: apt-ftparchive.1.xml
msgid ""
"The extra override file allows any arbitrary tag to be added or replaced in "
"the output. It has three columns, the first is the package, the second is "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:512
+#: apt-ftparchive.1.xml
msgid ""
"Generate the given checksum. These options default to on, when turned off "
"the generated index files will not have the checksum fields where possible. "
"<literal><replaceable>Index</replaceable></literal> can be "
"<literal>Packages</literal>, <literal>Sources</literal> or <literal>Release</"
"literal> and <literal><replaceable>Checksum</replaceable></literal> can be "
-"<literal>MD5</literal>, <literal>SHA1</literal> or <literal>SHA256</literal>."
+"<literal>MD5</literal>, <literal>SHA1</literal>, <literal>SHA256</literal> "
+"or <literal>SHA512</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:523
+#: apt-ftparchive.1.xml
msgid ""
"Use a binary caching DB. This has no effect on the generate command. "
"Configuration Item: <literal>APT::FTPArchive::DB</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:529
+#: apt-ftparchive.1.xml
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quiet up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:537
+#: apt-ftparchive.1.xml
msgid ""
"Perform Delinking. If the <literal>External-Links</literal> setting is used "
"then this option actually enables delinking of the files. It defaults to on "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:545
+#: apt-ftparchive.1.xml
msgid ""
"Perform contents generation. When this option is set and package indexes are "
"being generated with a cache DB then the file listing will also be extracted "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:555
+#: apt-ftparchive.1.xml
msgid ""
"Select the source override file to use with the <literal>sources</literal> "
"command. Configuration Item: <literal>APT::FTPArchive::SourceOverride</"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:561
+#: apt-ftparchive.1.xml
msgid ""
"Make the caching databases read only. Configuration Item: <literal>APT::"
"FTPArchive::ReadOnlyDB</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:566
+#: apt-ftparchive.1.xml
msgid ""
"Accept in the <literal>packages</literal> and <literal>contents</literal> "
"commands only package files matching <literal>*_arch.deb</literal> or "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:574
+#: apt-ftparchive.1.xml
msgid ""
"&apt-ftparchive; caches as much as possible of metadata in a cachedb. If "
"packages are recompiled and/or republished with the same version again, this "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:586
+#: apt-ftparchive.1.xml
msgid ""
"This configuration option defaults to \"<literal>true</literal>\" and should "
"only be set to <literal>\"false\"</literal> if the Archive generated with "
msgstr ""
#. type: Content of: <refentry><refsect1><para><programlisting>
-#: apt-ftparchive.1.xml:604
+#: apt-ftparchive.1.xml
#, no-wrap
msgid "<command>apt-ftparchive</command> packages <replaceable>directory</replaceable> | <command>gzip</command> > <filename>Packages.gz</filename>\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:600
+#: apt-ftparchive.1.xml
msgid ""
"To create a compressed Packages file for a directory containing binary "
"packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:614
+#: apt-ftparchive.1.xml
msgid ""
"<command>apt-ftparchive</command> returns zero on normal operation, decimal "
"100 on error."
msgstr ""
#. type: Attribute 'lang' of: <book>
-#: guide.dbk:8 offline.dbk:8
+#: guide.dbk offline.dbk
msgid "en"
msgstr ""
#. type: Content of: <book><title>
-#: guide.dbk:10
+#: guide.dbk
msgid "APT User's Guide"
msgstr ""
#. type: Content of: <book><bookinfo><authorgroup><author><personname>
-#: guide.dbk:16 offline.dbk:16
+#: guide.dbk offline.dbk
msgid "Jason Gunthorpe"
msgstr ""
#. type: Content of: <book><bookinfo><authorgroup><author><email>
-#: guide.dbk:16 offline.dbk:16
+#: guide.dbk offline.dbk
msgid "jgg@debian.org"
msgstr ""
#. type: Content of: <book><bookinfo><releaseinfo>
-#: guide.dbk:20 offline.dbk:20
+#: guide.dbk offline.dbk
msgid "Version &apt-product-version;"
msgstr ""
#. type: Content of: <book><bookinfo><abstract><para>
-#: guide.dbk:24
+#: guide.dbk
msgid ""
"This document provides an overview of how to use the the APT package manager."
msgstr ""
#. type: Content of: <book><bookinfo>
-#: guide.dbk:28
+#: guide.dbk
msgid ""
"<copyright><year>1998</year><holder>Jason Gunthorpe</holder></copyright>"
msgstr ""
#. type: Content of: <book><bookinfo><legalnotice><title>
-#: guide.dbk:31 offline.dbk:32
+#: guide.dbk offline.dbk
msgid "License Notice"
msgstr ""
#. type: Content of: <book><bookinfo><legalnotice><para>
-#: guide.dbk:33 offline.dbk:34
+#: guide.dbk offline.dbk
msgid ""
"\"APT\" and this document are free software; you can redistribute them and/"
"or modify them under the terms of the GNU General Public License as "
msgstr ""
#. type: Content of: <book><bookinfo><legalnotice><para>
-#: guide.dbk:42 offline.dbk:40
+#: guide.dbk offline.dbk
msgid ""
"For more details, on Debian systems, see the file /usr/share/common-licenses/"
"GPL for the full license."
msgstr ""
#. type: Content of: <book><chapter><title>
-#: guide.dbk:49
+#: guide.dbk
msgid "General"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:51
+#: guide.dbk
msgid ""
"The APT package currently contains two sections, the APT <command>dselect</"
"command> method and the <command>apt-get</command> command line user "
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: guide.dbk:57
+#: guide.dbk
msgid "Anatomy of the Package System"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:59
+#: guide.dbk
msgid ""
"The Debian packaging system has a large amount of information associated "
"with each package to help assure that it integrates cleanly and easily into "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:64
+#: guide.dbk
msgid ""
"The dependency system allows individual programs to make use of shared "
"elements in the system such as libraries. It simplifies placing infrequently "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:71
+#: guide.dbk
msgid ""
"The first step to understanding the dependency system is to grasp the "
"concept of a simple dependency. The meaning of a simple dependency is that a "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:76
+#: guide.dbk
msgid ""
"For instance, mailcrypt is an emacs extension that aids in encrypting email "
"with GPG. Without GPGP installed mailcrypt is useless, so mailcrypt has a "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:82
+#: guide.dbk
msgid ""
"The other important dependency to understand is a conflicting dependency. It "
"means that a package, when installed with another package, will not work and "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:92
+#: guide.dbk
msgid ""
"As an added complication there is the possibility for a package to pretend "
"to be another package. Consider that exim and sendmail for many intents are "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:102
+#: guide.dbk
msgid ""
"At any given time a single dependency may be met by packages that are "
"already installed or it may not be. APT attempts to help resolve dependency "
msgstr ""
#. type: Content of: <book><chapter><title>
-#: guide.dbk:111
+#: guide.dbk
msgid "apt-get"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:113
+#: guide.dbk
msgid ""
"<command>apt-get</command> provides a simple way to install packages from "
"the command line. Unlike <command>dpkg</command>, <command>apt-get</command> "
msgstr ""
#. type: Content of: <book><chapter><para><footnote><para>
-#: guide.dbk:119
+#: guide.dbk
msgid ""
"If you are using an http proxy server you must set the http_proxy "
"environment variable first, see sources.list(5)"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:119
+#: guide.dbk
msgid ""
"The first <placeholder type=\"footnote\" id=\"0\"/> thing that should be "
"done before using <command>apt-get</command> is to fetch the package lists "
msgstr ""
#. type: Content of: <book><chapter><screen>
-#: guide.dbk:127
+#: guide.dbk
#, no-wrap
msgid ""
"# apt-get update\n"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:134
+#: guide.dbk
msgid "Once updated there are several commands that can be used:"
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><term>
-#: guide.dbk:138
+#: guide.dbk
msgid "upgrade"
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><listitem><para>
-#: guide.dbk:141
+#: guide.dbk
msgid ""
"Upgrade will attempt to gently upgrade the whole system. Upgrade will never "
"install a new package or remove an existing package, nor will it ever "
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><term>
-#: guide.dbk:153
+#: guide.dbk
msgid "install"
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><listitem><para>
-#: guide.dbk:156
+#: guide.dbk
msgid ""
"Install is used to install packages by name. The package is automatically "
"fetched and installed. This can be useful if you already know the name of "
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><term>
-#: guide.dbk:167
+#: guide.dbk
msgid "dist-upgrade"
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><listitem><para>
-#: guide.dbk:170
+#: guide.dbk
msgid ""
"Dist-upgrade is a complete upgrader designed to simplify upgrading between "
"releases of Debian. It uses a sophisticated algorithm to determine the best "
msgstr ""
#. type: Content of: <book><chapter><variablelist><varlistentry><listitem><para>
-#: guide.dbk:180
+#: guide.dbk
msgid ""
"It is important to closely look at what dist-upgrade is going to do, its "
"decisions may sometimes be quite surprising."
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:187
+#: guide.dbk
msgid ""
"<command>apt-get</command> has several command line options that are "
"detailed in its man page, <citerefentry><refentrytitle>apt-get</"
msgstr ""
#. type: Content of: <book><chapter><title>
-#: guide.dbk:199
+#: guide.dbk
msgid "DSelect"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:201
+#: guide.dbk
msgid ""
"The APT <command>dselect</command> method provides the complete APT system "
"with the <command>dselect</command> package selection GUI. <command>dselect</"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:207
+#: guide.dbk
msgid ""
"To enable the APT method you need to select [A]ccess in <command>dselect</"
"command> and then choose the APT method. You will be prompted for a set of "
msgstr ""
#. type: Content of: <book><chapter><screen>
-#: guide.dbk:218
+#: guide.dbk
#, no-wrap
msgid ""
" Set up a list of distribution source locations\n"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:232
+#: guide.dbk
msgid ""
"The <emphasis>Sources</emphasis> setup starts by asking for the base of the "
"Debian archive, defaulting to a HTTP mirror. Next it asks for the "
msgstr ""
#. type: Content of: <book><chapter><screen>
-#: guide.dbk:237
+#: guide.dbk
#, no-wrap
msgid ""
" Please give the distribution tag to get or a path to the\n"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:244
+#: guide.dbk
msgid ""
"The distribution refers to the Debian version in the archive, "
"<emphasis>stable</emphasis> refers to the latest released version and "
msgstr ""
#. type: Content of: <book><chapter><screen>
-#: guide.dbk:253
+#: guide.dbk
#, no-wrap
msgid ""
" Please give the components to get\n"
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:259
+#: guide.dbk
msgid ""
"The components list refers to the list of sub distributions to fetch. The "
"distribution is split up based on software licenses, main being DFSG free "
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:265
+#: guide.dbk
msgid ""
"Any number of sources can be added, the setup script will continue to prompt "
"until you have specified all that you want."
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:269
+#: guide.dbk
msgid ""
"Before starting to use <command>dselect</command> it is necessary to update "
"the available list by selecting [U]pdate from the menu. This is a superset "
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:276
+#: guide.dbk
msgid ""
"You can then go on and make your selections using [S]elect and then perform "
"the installation using [I]nstall. When using the APT method the [C]onfig and "
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:282
+#: guide.dbk
msgid ""
"By default APT will automatically remove the package (.deb) files once they "
"have been successfully installed. To change this behavior place "
msgstr ""
#. type: Content of: <book><chapter><title>
-#: guide.dbk:288
+#: guide.dbk
msgid "The Interface"
msgstr ""
#. type: Content of: <book><chapter><para><footnote><para>
-#: guide.dbk:292
+#: guide.dbk
msgid ""
"The <command>dselect</command> method actually is a set of wrapper scripts "
"to <command>apt-get</command>. The method actually provides more "
msgstr ""
#. type: Content of: <book><chapter><para>
-#: guide.dbk:290
+#: guide.dbk
msgid ""
"Both that APT <command>dselect</command> method and <command>apt-get</"
"command> share the same interface. It is a simple system that generally "
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: guide.dbk:301
+#: guide.dbk
msgid "Startup"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:303
+#: guide.dbk
msgid ""
"Before all operations except update, APT performs a number of actions to "
"prepare its internal state. It also does some checks of the system's state. "
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: guide.dbk:309
+#: guide.dbk
#, no-wrap
msgid ""
"# apt-get check\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:314
+#: guide.dbk
msgid ""
"The first thing it does is read all the package files into memory. APT uses "
"a caching scheme so this operation will be faster the second time it is run. "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:320
+#: guide.dbk
msgid ""
"The final operation performs a detailed analysis of the system's "
"dependencies. It checks every dependency of every installed or unpacked "
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: guide.dbk:326
+#: guide.dbk
#, no-wrap
msgid ""
"# apt-get check\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:343
+#: guide.dbk
msgid ""
"In this example the system has many problems, including a serious problem "
"with libreadlineg2. For each package that has unmet dependencies a line is "
msgstr ""
#. type: Content of: <book><chapter><section><para><footnote><para>
-#: guide.dbk:352
+#: guide.dbk
msgid ""
"APT however considers all known dependencies and attempts to prevent broken "
"packages"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:350
+#: guide.dbk
msgid ""
"There are two ways a system can get into a broken state like this. The first "
"is caused by <command>dpkg</command> missing some subtle relationships "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:359
+#: guide.dbk
msgid ""
"The second situation is much less serious than the first because APT places "
"certain constraints on the order that packages are installed. In both cases "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:368
+#: guide.dbk
msgid ""
"However, if the <literal>-f</literal> option is used to correct a seriously "
"broken system caused by the first case then it is possible that it will "
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: guide.dbk:376
+#: guide.dbk
msgid "The Status Report"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:378
+#: guide.dbk
msgid ""
"Before proceeding <command>apt-get</command> will present a report on what "
"will happen. Generally the report reflects the type of operation being "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:385
+#: guide.dbk
msgid "The Extra Package list"
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:387
+#: guide.dbk
#, no-wrap
msgid ""
"The following extra packages will be installed:\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:395
+#: guide.dbk
msgid ""
"The Extra Package list shows all of the packages that will be installed or "
"upgraded in excess of the ones mentioned on the command line. It is only "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:402
+#: guide.dbk
msgid "The Packages to Remove"
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:404
+#: guide.dbk
#, no-wrap
msgid ""
"The following packages will be REMOVED:\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:411
+#: guide.dbk
msgid ""
"The Packages to Remove list shows all of the packages that will be removed "
"from the system. It can be shown for any of the operations and should be "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:421
+#: guide.dbk
msgid "The New Packages list"
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:423
+#: guide.dbk
#, no-wrap
msgid ""
"The following NEW packages will installed:\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:427
+#: guide.dbk
msgid ""
"The New Packages list is simply a reminder of what will happen. The packages "
"listed are not presently installed in the system but will be when APT is "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:432
+#: guide.dbk
msgid "The Kept Back list"
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:434
+#: guide.dbk
#, no-wrap
msgid ""
"The following packages have been kept back\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:439
+#: guide.dbk
msgid ""
"Whenever the whole system is being upgraded there is the possibility that "
"new versions of packages cannot be installed because they require new things "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:448
+#: guide.dbk
msgid "Held Packages warning"
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:450
+#: guide.dbk
#, no-wrap
msgid ""
"The following held packages will be changed:\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:454
+#: guide.dbk
msgid ""
"Sometimes you can ask APT to install a package that is on hold, in such a "
"case it prints out a warning that the held package is going to be changed. "
msgstr ""
#. type: Content of: <book><chapter><section><section><title>
-#: guide.dbk:460
+#: guide.dbk
msgid "Final summary"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:462
+#: guide.dbk
msgid ""
"Finally, APT will print out a summary of all the changes that will occur."
msgstr ""
#. type: Content of: <book><chapter><section><section><screen>
-#: guide.dbk:465
+#: guide.dbk
#, no-wrap
msgid ""
"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n"
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:470
+#: guide.dbk
msgid ""
"The first line of the summary simply is a reduced version of all of the "
"lists and includes the number of upgrades - that is packages already "
msgstr ""
#. type: Content of: <book><chapter><section><section><para>
-#: guide.dbk:484
+#: guide.dbk
msgid ""
"Some other reports can be generated by using the -u option to show packages "
"to upgrade, they are similar to the previous examples."
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: guide.dbk:491
+#: guide.dbk
msgid "The Status Display"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:493
+#: guide.dbk
msgid ""
"During the download of archives and package files APT prints out a series of "
"status messages."
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: guide.dbk:497
+#: guide.dbk
#, no-wrap
msgid ""
"# apt-get update\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:506
+#: guide.dbk
msgid ""
"The lines starting with <emphasis>Get</emphasis> are printed out when APT "
"begins to fetch a file while the last line indicates the progress of the "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:514
+#: guide.dbk
msgid ""
"The next section of the status line is repeated once for each download "
"thread and indicates the operation being performed and some useful "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:524
+#: guide.dbk
msgid ""
"Inside of the single quote is an informative string indicating the progress "
"of the negotiation phase of the download. Typically it progresses from "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:539
+#: guide.dbk
msgid ""
"The status display updates every half second to provide a constant feedback "
"on the download progress while the Get lines scroll back whenever a new file "
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: guide.dbk:547
+#: guide.dbk
msgid "Dpkg"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: guide.dbk:549
+#: guide.dbk
msgid ""
"APT uses <command>dpkg</command> for installing the archives and will switch "
"over to the <command>dpkg</command> interface once downloading is completed. "
msgstr ""
#. type: Content of: <book><title>
-#: offline.dbk:10
+#: offline.dbk
msgid "Using APT Offline"
msgstr ""
#. type: Content of: <book><bookinfo><abstract><para>
-#: offline.dbk:24
+#: offline.dbk
msgid ""
"This document describes how to use APT in a non-networked environment, "
"specifically a 'sneaker-net' approach for performing upgrades."
msgstr ""
#. type: Content of: <book><bookinfo>
-#: offline.dbk:29
+#: offline.dbk
msgid ""
"<copyright><year>1999</year><holder>Jason Gunthorpe</holder></copyright>"
msgstr ""
#. type: Content of: <book><chapter><title>
-#: offline.dbk:47
+#: offline.dbk
msgid "Introduction"
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: offline.dbk:49 offline.dbk:79 offline.dbk:191
+#: offline.dbk
msgid "Overview"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:51
+#: offline.dbk
msgid ""
"Normally APT requires direct access to a Debian archive, either from a local "
"media or through a network. Another common complaint is that a Debian "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:57
+#: offline.dbk
msgid ""
"The solution to this is to use large removable media such as a Zip disc or a "
"SuperDisk disc. These discs are not large enough to store the entire Debian "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:68
+#: offline.dbk
msgid ""
"This is achieved by creatively manipulating the APT configuration file. The "
"essential premise to tell APT to look on a disc for it's archive files. Note "
-"that the disc should be formated with a filesystem that can handle long file "
-"names such as ext2, fat32 or vfat."
+"that the disc should be formatted with a filesystem that can handle long "
+"file names such as ext2, fat32 or vfat."
msgstr ""
#. type: Content of: <book><chapter><title>
-#: offline.dbk:77
+#: offline.dbk
msgid "Using APT on both machines"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:81
+#: offline.dbk
msgid ""
"APT being available on both machines gives the simplest configuration. The "
"basic idea is to place a copy of the status file on the disc and use the "
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:87
+#: offline.dbk
#, no-wrap
msgid ""
" /disc/\n"
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: offline.dbk:98
+#: offline.dbk
msgid "The configuration file"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:100
+#: offline.dbk
msgid ""
"The configuration file should tell APT to store its files on the disc and to "
"use the configuration files on the disc as well. The sources.list should "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:108
+#: offline.dbk
msgid ""
"<emphasis>apt.conf</emphasis> must contain the necessary information to make "
"APT use the disc:"
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:112
+#: offline.dbk
#, no-wrap
msgid ""
" APT\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:137
+#: offline.dbk
msgid ""
"More details can be seen by examining the apt.conf man page and the sample "
"configuration file in <emphasis>/usr/share/doc/apt/examples/apt.conf</"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:142
+#: offline.dbk
msgid ""
"On the target machine the first thing to do is mount the disc and copy "
"<emphasis>/var/lib/dpkg/status</emphasis> to it. You will also need to "
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:151
+#: offline.dbk
#, no-wrap
msgid ""
" # export APT_CONFIG=\"/disc/apt.conf\"\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:158
+#: offline.dbk
msgid ""
"The dist-upgrade command can be replaced with any other standard APT "
"commands, particularly dselect-upgrade. You can even use an APT front end "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:164
+#: offline.dbk
msgid ""
"Now the disc contains all of the index files and archives needed to upgrade "
"the target machine. Take the disc back and run:"
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:168
+#: offline.dbk
#, no-wrap
msgid ""
" # export APT_CONFIG=\"/disc/apt.conf\"\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:175
+#: offline.dbk
msgid ""
"It is necessary for proper function to re-specify the status file to be the "
"local one. This is very important!"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:179
+#: offline.dbk
msgid ""
"If you are using dselect you can do the very risky operation of copying disc/"
"status to /var/lib/dpkg/status so that any selections you made on the remote "
msgstr ""
#. type: Content of: <book><chapter><title>
-#: offline.dbk:189
+#: offline.dbk
msgid "Using APT and wget"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:193
+#: offline.dbk
msgid ""
"<emphasis>wget</emphasis> is a popular and portable download tool that can "
"run on nearly any machine. Unlike the method above this requires that the "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:198
+#: offline.dbk
msgid ""
"The basic idea is to create a disc that has only the archive files "
"downloaded from the remote site. This is done by using the --print-uris "
msgstr ""
#. type: Content of: <book><chapter><section><title>
-#: offline.dbk:204
+#: offline.dbk
#, fuzzy
msgid "Operation"
msgstr "Descrição"
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:206
+#: offline.dbk
msgid ""
"Unlike the previous technique no special configuration files are required. "
"We merely use the standard APT commands to generate the file list."
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:210
+#: offline.dbk
#, no-wrap
msgid ""
" # apt-get dist-upgrade\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:216
+#: offline.dbk
msgid ""
"Any command other than dist-upgrade could be used here, including dselect-"
"upgrade."
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:220
+#: offline.dbk
msgid ""
"The /disc/wget-script file will now contain a list of wget commands to "
"execute in order to fetch the necessary archives. This script should be run "
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:226
+#: offline.dbk
msgid "The remote machine would do something like"
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:229
+#: offline.dbk
#, no-wrap
msgid ""
" # cd /disc\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:234
+#: offline.dbk
msgid ""
"Once the archives are downloaded and the disc returned to the Debian machine "
"installation can proceed using,"
msgstr ""
#. type: Content of: <book><chapter><section><screen>
-#: offline.dbk:238
+#: offline.dbk
#, no-wrap
msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade\n"
msgstr ""
#. type: Content of: <book><chapter><section><para>
-#: offline.dbk:241
+#: offline.dbk
msgid "Which will use the already fetched archives on the disc."
msgstr ""
+#, fuzzy
+#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>"
+#~ msgstr "<filename>/etc/apt.conf</>"
+
+#, fuzzy
+#~ msgid "&apt-get;, &apt-conf;"
+#~ msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+
+#, fuzzy
+#~ msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
+#~ msgstr "a linha <literal>Package:</literal>"
+
+#, fuzzy
+#~ msgid "The option <literal>APT::Color</literal> is enabled."
+#~ msgstr "a linha <literal>Component:</literal>"
+
+#, fuzzy
+#~ msgid ""
+#~ "The option <literal>upgrade</literal> has <literal>--with-new-pkgs</"
+#~ "literal> enabled by default."
+#~ msgstr "a linha <literal>Archive:</literal>"
+
+#, fuzzy
+#~ msgid ""
+#~ "to the versions that are not installed and do not belong to the target "
+#~ "release."
+#~ msgstr ""
+#~ "para as instâncias que não estã instaladas e que não pertencem a versão "
+#~ "alvo."
+
+#, fuzzy
+#~ msgid "Some examples:"
+#~ msgstr "Exemplos"
+
#, fuzzy
#~ msgid ""
#~ "See E<lt>http://bugs.debian.org/aptE<gt>. If you wish to report a bug in "
projects / apt.git / blobdiff