if [ $MSGLEVEL -le 2 ]; then
msgmsg() { true; }
msgnmsg() { true; }
+ msgtest() { true; }
+ msgpass() { echo -n " ${CPASS}P${CNORMAL}" >&2; }
+ msgskip() { echo -n " ${CWARNING}S${CNORMAL}" >&2; }
+ msgfail() { echo -n " ${CFAIL}FAIL${CNORMAL}" >&2; }
fi
if [ $MSGLEVEL -le 3 ]; then
msginfo() { true; }
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
if [ -f ./aptconfig.conf ]; then
APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+ elif [ -f ../aptconfig.conf ]; then
+ APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
else
LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
fi
aptget() { runapt apt-get $*; }
aptftparchive() { runapt apt-ftparchive $*; }
aptkey() { runapt apt-key $*; }
+aptmark() { runapt apt-mark $*; }
dpkg() {
$(which dpkg) --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log $*
}
+aptitude() {
+ if [ -f ./aptconfig.conf ]; then
+ APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which aptitude) $*
+ elif [ -f ../aptconfig.conf ]; then
+ APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which aptitude) $*
+ else
+ LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which aptitude) $*
+ fi
+}
+
+addtrap() {
+ CURRENTTRAP="$CURRENTTRAP $1"
+ trap "$CURRENTTRAP" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
+}
setupenvironment() {
TMPWORKINGDIRECTORY=$(mktemp -d)
BUILDDIRECTORY="${TESTDIR}/../../build/bin"
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
local OLDWORKINGDIRECTORY=$(pwd)
- CURRENTTRAP="cd /; rm -rf $TMPWORKINGDIRECTORY; cd $OLDWORKINGDIRECTORY"
- trap "$CURRENTTRAP" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
+ addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY; cd $OLDWORKINGDIRECTORY;"
cd $TMPWORKINGDIRECTORY
mkdir rootdir aptarchive keys
cd rootdir
local PACKAGESFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Packages-/' -e 's/^skip-/Packages-/')
if [ -f "${TESTDIR}/${PACKAGESFILE}" ]; then
cp "${TESTDIR}/${PACKAGESFILE}" aptarchive/Packages
- else
- touch aptarchive/Packages
+ fi
+ local SOURCESSFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Sources-/' -e 's/^skip-/Sources-/')
+ if [ -f "${TESTDIR}/${SOURCESSFILE}" ]; then
+ cp "${TESTDIR}/${SOURCESSFILE}" aptarchive/Sources
fi
cp $(find $TESTDIR -name '*.pub' -o -name '*.sec') keys/
ln -s ${TMPWORKINGDIRECTORY}/keys/joesixpack.pub rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" > aptconfig.conf
+ echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
echo "Debug::NoLocking \"true\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
+ echo "Dir::Bin::Methods \"${BUILDDIRECTORY}/methods\";" >> aptconfig.conf
echo "Dir::Bin::dpkg \"fakeroot\";" >> aptconfig.conf
echo "DPKG::options:: \"dpkg\";" >> aptconfig.conf
echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
echo "DPKG::options:: \"--force-not-root\";" >> aptconfig.conf
echo "DPKG::options:: \"--force-bad-path\";" >> aptconfig.conf
echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
+ echo 'quiet::NoUpdate "true";' >> aptconfig.conf
export LC_ALL=C
+ export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
msgdone "info"
}
configarchitecture() {
local CONFFILE=rootdir/etc/apt/apt.conf.d/01multiarch.conf
+ rm -f $CONFFILE
echo "APT::Architecture \"$1\";" > $CONFFILE
shift
while [ -n "$1" ]; do
Build-Depends: debhelper (>= 7)
Standards-Version: 3.9.1
-Package: $NAME
-Architecture: $ARCH" > debian/control
+Package: $NAME" > debian/control
+ if [ "$ARCH" = 'all' ]; then
+ echo "Architecture: all" >> debian/control
+ else
+ echo "Architecture: any" >> debian/control
+ fi
test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> debian/control
if [ -z "$DESCRIPTION" ]; then
echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
local DEPENDENCIES="$5"
local DESCRIPTION="$6"
local SECTION="${7:-others}"
+ local PRIORITY="${8:-optional}"
local DISTSECTION
if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
DISTSECTION="main"
else
DISTSECTION="$(echo "$SECTION" | cut -d'/' -f 1)"
fi
- setupsimplenativepackage "$NAME" "$ARCH" "$VERSION" "$RELEASE" "$DEPENDENCIES" "$DESCRIPTION" "$SECTION"
- buildpackage "incoming/${NAME}-${VERSION}" "$RELEASE" "$DISTSECTION"
- rm -rf "incoming/${NAME}-${VERSION}"
+ local BUILDDIR=${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}
+
+ msgninfo "Build package ${NAME} in ${VERSION} for ${RELEASE} in ${DISTSECTION}… "
+ mkdir -p $BUILDDIR/debian/source
+ echo "* most suckless software product ever" > ${BUILDDIR}/FEATURES
+ echo "#!/bin/sh
+echo '$NAME says \"Hello!\"'" > ${BUILDDIR}/${NAME}
+
+ echo "Copyleft by Joe Sixpack $(date +%Y)" > ${BUILDDIR}/debian/copyright
+ echo "$NAME ($VERSION) $RELEASE; urgency=low
+
+ * Initial release
+
+ -- Joe Sixpack <joe@example.org> $(date -R)" > ${BUILDDIR}/debian/changelog
+ echo "Source: $NAME
+Section: $SECTION
+Priority: $PRIORITY
+Maintainer: Joe Sixpack <joe@example.org>
+Standards-Version: 3.9.1
+
+Package: $NAME" > ${BUILDDIR}/debian/control
+ if [ "$ARCH" = 'all' ]; then
+ echo "Architecture: all" >> ${BUILDDIR}/debian/control
+ else
+ echo "Architecture: any" >> ${BUILDDIR}/debian/control
+ fi
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> ${BUILDDIR}/debian/control
+ if [ -z "$DESCRIPTION" ]; then
+ echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+ If you find such a package installed on your system,
+ YOU did something horribly wrong! They are autogenerated
+ und used only by testcases for APT and surf no other propose…" >> ${BUILDDIR}/debian/control
+ else
+ echo "Description: $DESCRIPTION" >> ${BUILDIR}/debian/control
+ fi
+ echo '3.0 (native)' > ${BUILDDIR}/debian/source/format
+ local SRCS="$( (cd ${BUILDDIR}/..; dpkg-source -b ${NAME}-${VERSION} 2>&1) | grep '^dpkg-source: info: building' | grep -o '[a-z0-9._+~-]*$')"
+ for SRC in $SRCS; do
+ echo "pool/${SRC}" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist
+ done
+
+ for arch in $(echo "$ARCH" | sed -e 's#,#\n#g'); do
+ rm -rf ${BUILDDIR}/debian/tmp
+ mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
+ cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
+ cp ${BUILDDIR}/${NAME} ${BUILDDIR}/debian/tmp/usr/bin/${NAME}-${arch}
+ (cd ${BUILDDIR}; dpkg-gencontrol -DArchitecture=$arch)
+ (cd ${BUILDDIR}/debian/tmp; md5sum $(find usr/ -type f) > DEBIAN/md5sums)
+
+ dpkg-deb --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/.. 2> /dev/null > /dev/null
+ echo "pool/${NAME}_${VERSION}_${arch}.deb" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist
+ done
+
+ mkdir -p ${BUILDDIR}/../${NAME}_${VERSION}
+ cp ${BUILDDIR}/debian/changelog ${BUILDDIR}/../${NAME}_${VERSION}/
+ cp ${BUILDDIR}/debian/changelog ${BUILDDIR}/../${NAME}_${VERSION}.changelog
+ rm -rf "${BUILDDIR}"
+ msgdone "info"
}
buildpackage() {
echo -n '";
};
Default {
- Packages::Compress ". gzip bzip2 lzma";
- Sources::Compress ". gzip bzip2 lzma";
- Contents::Compress ". gzip bzip2 lzma";
+ Packages::Compress ". gzip bzip2 lzma xz";
+ Sources::Compress ". gzip bzip2 lzma xz";
+ Contents::Compress ". gzip bzip2 lzma xz";
+ Translation::Compress ". gzip bzip2 lzma xz";
+ LongDescription "false";
};
TreeDefault {
Directory "pool/";
done
}
+insertpackage() {
+ local RELEASE="$1"
+ local NAME="$2"
+ local ARCH="$3"
+ local VERSION="$4"
+ local DEPENDENCIES="$5"
+ local PRIORITY="${6:-optional}"
+ local ARCHS=""
+ for arch in $(echo "$ARCH" | sed -e 's#,#\n#g'); do
+ if [ "$arch" = "all" ]; then
+ ARCHS="$(aptconfig dump | grep APT::Architecture | cut -d'"' -f 2 | sed '/^$/ d' | sort | uniq | tr '\n' ' ')"
+ else
+ ARCHS="$arch"
+ fi
+ for BUILDARCH in $ARCHS; do
+ local PPATH="aptarchive/dists/${RELEASE}/main/binary-${BUILDARCH}"
+ mkdir -p $PPATH aptarchive/dists/${RELEASE}/main/source
+ touch aptarchive/dists/${RELEASE}/main/source/Sources
+ local FILE="${PPATH}/Packages"
+ echo "Package: $NAME
+Priority: $PRIORITY
+Section: other
+Installed-Size: 42
+Maintainer: Joe Sixpack <joe@example.org>
+Architecture: $arch
+Version: $VERSION
+Filename: pool/main/${NAME}/${NAME}_${VERSION}_${arch}.deb" >> $FILE
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
+ echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+ If you find such a package installed on your system,
+ YOU did something horribly wrong! They are autogenerated
+ und used only by testcases for APT and surf no other propose…
+" >> $FILE
+ done
+ done
+}
+
+insertsource() {
+ local RELEASE="$1"
+ local NAME="$2"
+ local ARCH="$3"
+ local VERSION="$4"
+ local DEPENDENCIES="$5"
+ local ARCHS=""
+ local SPATH="aptarchive/dists/${RELEASE}/main/source"
+ mkdir -p $SPATH
+ local FILE="${SPATH}/Sources"
+ echo "Package: $NAME
+Binary: $NAME
+Version: $VERSION
+Maintainer: Joe Sixpack <joe@example.org>
+Architecture: $ARCH" >> $FILE
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
+ echo "Files:
+ d41d8cd98f00b204e9800998ecf8427e 0 ${NAME}_${VERSION}.dsc
+ d41d8cd98f00b204e9800998ecf8427e 0 ${NAME}_${VERSION}.tar.gz" >> $FILE
+}
+
+insertinstalledpackage() {
+ local NAME="$1"
+ local ARCH="$2"
+ local VERSION="$3"
+ local DEPENDENCIES="$4"
+ local PRIORITY="${5:-optional}"
+ local FILE="rootdir/var/lib/dpkg/status"
+ for arch in $(echo "$ARCH" | sed -e 's#,#\n#g'); do
+ echo "Package: $NAME
+Status: install ok installed
+Priority: $PRIORITY
+Section: other
+Installed-Size: 42
+Maintainer: Joe Sixpack <joe@example.org>
+Architecture: $arch
+Version: $VERSION" >> $FILE
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
+ echo "Description: an autogenerated dummy ${NAME}=${VERSION}/installed
+ If you find such a package installed on your system,
+ YOU did something horribly wrong! They are autogenerated
+ und used only by testcases for APT and surf no other propose…
+" >> $FILE
+ done
+}
+
+
buildaptarchivefromincoming() {
msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on incoming packages…"
cd aptarchive
[ -e dists ] || buildaptftparchivedirectorystructure
msgninfo "\tGenerate Packages, Sources and Contents files… "
aptftparchive -qq generate ftparchive.conf
- msgdone "info"
- msgninfo "\tGenerate Release files… "
- for dir in $(find ./dists -mindepth 1 -maxdepth 1 -type d); do
- aptftparchive -qq release $dir -o APT::FTPArchive::Release::Codename="$(echo "$dir" | cut -d'/' -f 3)" | sed -e '/0 Release$/ d' > $dir/Release # remove the self reference
- done
cd - > /dev/null
msgdone "info"
+ generatereleasefiles
}
buildaptarchivefromfiles() {
msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on prebuild files…"
- cd aptarchive
- if [ -f Packages ]; then
- msgninfo "\tPackages file… "
- cat Packages | gzip > Packages.gz
- cat Packages | bzip2 > Packages.bz2
- cat Packages | lzma > Packages.lzma
+ find aptarchive -name 'Packages' -o -name 'Sources' | while read line; do
+ msgninfo "\t${line} file… "
+ cat ${line} | gzip > ${line}.gz
+ cat ${line} | bzip2 > ${line}.bz2
+ cat ${line} | lzma > ${line}.lzma
+ cat ${line} | xz > ${line}.xz
msgdone "info"
+ done
+ generatereleasefiles
+}
+
+# can be overridden by testcases for their pleasure
+getcodenamefromsuite() { echo -n "$1"; }
+getreleaseversionfromsuite() { true; }
+
+generatereleasefiles() {
+ msgninfo "\tGenerate Release files… "
+ local DATE="${1:-now}"
+ if [ -e aptarchive/dists ]; then
+ for dir in $(find ./aptarchive/dists -mindepth 3 -maxdepth 3 -type d -name 'i18n'); do
+ aptftparchive -qq release $dir -o APT::FTPArchive::Release::Patterns::='Translation-*' > $dir/Index
+ done
+ for dir in $(find ./aptarchive/dists -mindepth 1 -maxdepth 1 -type d); do
+ local SUITE="$(echo "$dir" | cut -d'/' -f 4)"
+ local CODENAME="$(getcodenamefromsuite $SUITE)"
+ local VERSION="$(getreleaseversionfromsuite $SUITE)"
+ if [ -z "$VERSION" ]; then
+ aptftparchive -qq release $dir \
+ -o APT::FTPArchive::Release::Suite="${SUITE}" \
+ -o APT::FTPArchive::Release::Codename="${CODENAME}" \
+ | sed -e '/0 Release$/ d' > $dir/Release # remove the self reference
+ else
+ aptftparchive -qq release $dir \
+ -o APT::FTPArchive::Release::Suite="${SUITE}" \
+ -o APT::FTPArchive::Release::Codename="${CODENAME}" \
+ -o APT::FTPArchive::Release::Version="${VERSION}" \
+ | sed -e '/0 Release$/ d' > $dir/Release # remove the self reference
+ fi
+ if [ "$SUITE" = "experimental" -o "$SUITE" = "experimental2" ]; then
+ sed -i '/^Date: / a\
+NotAutomatic: yes' $dir/Release
+ fi
+ done
+ else
+ aptftparchive -qq release ./aptarchive | sed -e '/0 Release$/ d' > aptarchive/Release # remove the self reference
fi
- if [ -f Sources ]; then
- msgninfo "\tSources file… "
- cat Sources | gzip > Sources.gz
- cat Sources | bzip2 > Sources.bz2
- cat Sources | lzma > Sources.lzma
- msgdone "info"
+ if [ "$DATE" != "now" ]; then
+ for release in $(find ./aptarchive -name 'Release'); do
+ touch -d "$1" $release
+ done
fi
- msgninfo "\tRelease file… "
- aptftparchive -qq release . | sed -e '/0 Release$/ d' > Release # remove the self reference
msgdone "info"
- cd ..
}
setupdistsaptarchive() {
done
for RELEASE in $(find aptarchive/ -name Release); do
gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" -abs -o ${RELEASE}.gpg ${RELEASE}
+ gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" --clearsign -o "$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')" $RELEASE
done
msgdone "info"
}
changetowebserver() {
if which weborf > /dev/null; then
weborf -xb aptarchive/ 2>&1 > /dev/null &
- CURRENTTRAP="kill $(ps | grep weborf | sed -e 's#^[ ]*##' | cut -d' ' -f 1); $CURRENTTRAP"
- trap "$CURRENTTRAP" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
- local APTARCHIVE="file://$(readlink -f ./aptarchive)"
- for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
- sed -i $LIST -e "s#$APTARCHIVE#http://localhost:8080/#"
- done
- return 0
+ addtrap "kill $!;"
+ elif which lighttpd > /dev/null; then
+ echo "server.document-root = \"$(readlink -f ./aptarchive)\"
+server.port = 8080
+server.stat-cache-engine = \"disable\"" > lighttpd.conf
+ lighttpd -t -f lighttpd.conf >/dev/null || msgdie 'Can not change to webserver: our lighttpd config is invalid'
+ lighttpd -D -f lighttpd.conf 2>/dev/null >/dev/null &
+ addtrap "kill $!;"
+ else
+ msgdie 'You have to install weborf or lighttpd first'
+ return 1
fi
- return 1
+ local APTARCHIVE="file://$(readlink -f ./aptarchive)"
+ for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
+ sed -i $LIST -e "s#$APTARCHIVE#http://localhost:8080/#"
+ done
+ return 0
}
checkdiff() {
testequal() {
local COMPAREFILE=$(mktemp)
+ addtrap "rm $COMPAREFILE;"
echo "$1" > $COMPAREFILE
shift
msgtest "Test for equality of" "$*"
$* 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
- rm $COMPAREFILE
}
testequalor2() {
local COMPAREFILE1=$(mktemp)
local COMPAREFILE2=$(mktemp)
local COMPAREAGAINST=$(mktemp)
+ addtrap "rm $COMPAREFILE1 $COMPAREFILE2 $COMPAREAGAINST;"
echo "$1" > $COMPAREFILE1
echo "$2" > $COMPAREFILE2
shift 2
( echo "\n${CINFO}Diff against OR 1${CNORMAL}" "$(checkdiff $COMPAREFILE1 $COMPAREAGAINST)" \
"\n${CINFO}Diff against OR 2${CNORMAL}" "$(checkdiff $COMPAREFILE2 $COMPAREAGAINST)" &&
msgfail )
- rm $COMPAREFILE1 $COMPAREFILE2 $COMPAREAGAINST
}
testshowvirtual() {
- local VIRTUAL="N: Can't select versions from package '$1' as it purely virtual"
+ local VIRTUAL="N: Can't select versions from package '$1' as it is purely virtual"
local PACKAGE="$1"
shift
while [ -n "$1" ]; do
VIRTUAL="${VIRTUAL}
-N: Can't select versions from package '$1' as it purely virtual"
+N: Can't select versions from package '$1' as it is purely virtual"
PACKAGE="${PACKAGE} $1"
shift
done
VIRTUAL="${VIRTUAL}
N: No packages found"
local COMPAREFILE=$(mktemp)
+ addtrap "rm $COMPAREFILE;"
local ARCH=$(dpkg-architecture -qDEB_HOST_ARCH_CPU)
eval `apt-config shell ARCH APT::Architecture`
echo "$VIRTUAL" | sed -e "s/:$ARCH//" -e 's/:all//' > $COMPAREFILE
aptcache show -q=0 $PACKAGE 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
- rm $COMPAREFILE
}
testnopackage() {
testdpkginstalled() {
msgtest "Test for correctly installed package(s) with" "dpkg -l $*"
- local PKGS="$(dpkg -l $* | grep '^[a-z]' | grep '^[^i]' | wc -l)"
- if [ "$PKGS" != 0 ]; then
+ local PKGS="$(dpkg -l $* | grep '^i' | wc -l)"
+ if [ "$PKGS" != $# ]; then
echo $PKGS
dpkg -l $* | grep '^[a-z]'
msgfail
msgpass
}
-testdpkgnoninstalled() {
- msgtest "Test for correctly non-installed package(s) with" "dpkg -l $*"
- local PKGS="$(dpkg -l $* | grep '^[a-z]' | grep '^[^u]' | wc -l)"
+testdpkgnotinstalled() {
+ msgtest "Test for correctly not-installed package(s) with" "dpkg -l $*"
+ local PKGS="$(dpkg -l $* 2> /dev/null | grep '^i' | wc -l)"
if [ "$PKGS" != 0 ]; then
echo
dpkg -l $* | grep '^[a-z]'
fi
msgpass
}
+
+testmarkedauto() {
+ local COMPAREFILE=$(mktemp)
+ addtrap "rm $COMPAREFILE;"
+ if [ -n "$1" ]; then
+ msgtest 'Test for correctly marked as auto-installed' "$*"
+ while [ -n "$1" ]; do echo "$1"; shift; done | sort > $COMPAREFILE
+ else
+ msgtest 'Test for correctly marked as auto-installed' 'no package'
+ echo -n > $COMPAREFILE
+ fi
+ aptmark showauto 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+}
+
+pause() {
+ echo "STOPPED execution. Press enter to continue"
+ local IGNORE
+ read IGNORE
+}
projects / apt.git / blobdiff