fi
fi
-
if [ "$MSGCOLOR" != 'NO' ]; then
CERROR="\033[1;31m" # red
CWARNING="\033[1;33m" # yellow
printf "$START " "$1"
shift
while [ -n "$1" ]; do
- printf "$MIDDLE " "$(echo "$1" | sed -e 's#^apt\([cfghs]\)#apt-\1#')"
+ printf "$MIDDLE " "$(echo "$1" | sed -e 's#^apt\([cfghks]\)#apt-\1#')"
shift
done
fi
if [ $# -gt 0 ] && [ -n "$1" ]; then printf "${CFAIL}FAIL: $*${CNORMAL}\n" >&2;
else printf "${CFAIL}FAIL${CNORMAL}\n" >&2; fi
if [ -n "$APT_DEBUG_TESTS" ]; then
- $SHELL
+ runapt $SHELL
fi
EXIT_CODE=$((EXIT_CODE+1));
}
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
local CMD="$1"
shift
- case $CMD in
+ case "$CMD" in
sh|aptitude|*/*|command) ;;
*) CMD="${BUILDDIRECTORY}/$CMD";;
esac
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG="$(getaptconfig)" LD_LIBRARY_PATH=${LIBRARYPATH} $CMD "$@"
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG="$(getaptconfig)" LD_LIBRARY_PATH="${LIBRARYPATH}:${LD_LIBRARY_PATH}" "$CMD" "$@"
}
+runpython3() { runapt command python3 "$@"; }
aptconfig() { runapt apt-config "$@"; }
aptcache() { runapt apt-cache "$@"; }
aptcdrom() { runapt apt-cdrom "$@"; }
aptget() { runapt apt-get "$@"; }
-aptftparchive() { runapt apt-ftparchive "$@"; }
+aptftparchive() { runapt "${APTFTPARCHIVEBINDIR}/apt-ftparchive" "$@"; }
aptkey() { runapt apt-key "$@"; }
aptmark() { runapt apt-mark "$@"; }
aptsortpkgs() { runapt apt-sortpkgs "$@"; }
aptextracttemplates() { runapt apt-extracttemplates "$@"; }
aptinternalsolver() { runapt "${APTINTERNALSOLVER}" "$@"; }
aptdumpsolver() { runapt "${APTDUMPSOLVER}" "$@"; }
+aptinternalplanner() { runapt "${APTINTERNALPLANNER}" "$@"; }
dpkg() {
"${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "$@"
if [ "${CMD##*/}" = "$CMD" ]; then
CMD="${BUILDDIRECTORY}/${CMD}"
fi
- runapt command gdb --quiet -ex run "$CMD" --args "$CMD" "$@"
+ runapt command gdb --quiet -ex "directory '$SOURCEDIRECTORY'" -ex run "$CMD" --args "$CMD" "$@"
+}
+lastmodification() {
+ date -u -d "@$(stat -c '%Y' "${TMPWORKINGDIRECTORY}/$1")" -R
+}
+releasefiledate() {
+ grep "^${2:-Date}:" "$1" | cut -d' ' -f 2-
}
exitwithstatus() {
trap "shellsetedetector; $CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
}
+escape_shell() {
+ echo "$@" | sed -e "s#'#'\"'\"'#g"
+}
+
+find_project_binary_dir() {
+ local TESTDIRECTORY="$(readlink -f "$(dirname $0)")"
+ if [ -z "$PROJECT_BINARY_DIR" ]; then
+ PROJECT_BINARY_DIR=
+ for dir in ${TESTDIRECTORY}/../../ ${TESTDIRECTORY}/../../*; do
+ test -e "$dir/CMakeCache.txt" || continue
+ if [ -z "$PROJECT_BINARY_DIR" ] ||
+ [ "$dir/CMakeCache.txt" -nt "$PROJECT_BINARY_DIR/CMakeCache.txt" ]; then
+ PROJECT_BINARY_DIR="$dir"
+ fi
+ done
+ if [ -z "$PROJECT_BINARY_DIR" ]; then
+ echo "Cannot find build directory, you might want to set PROJECT_BINARY_DIR" >&2
+ exit 1
+ fi
+ export PROJECT_BINARY_DIR
+ fi
+}
setupenvironment() {
+ # Next check needs a gnu stat, let's figure that out early.
+ stat=stat
+ if command -v gnustat >/dev/null 2>&1; then
+ stat=gnustat
+ fi
# privilege dropping and testing doesn't work if /tmp isn't world-writeable (as e.g. with libpam-tmpdir)
- if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$(stat --format '%a' "$TMPDIR")" != '1777' ]; then
+ if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$($stat --format '%a' "$TMPDIR")" != '1777' ]; then
unset TMPDIR
fi
TMPWORKINGDIRECTORY="$(mktemp -d)"
- addtrap "cd /; rm -rf \"$TMPWORKINGDIRECTORY\";"
+ addtrap "cd /; rm -rf '$(escape_shell "$TMPWORKINGDIRECTORY")';"
+ if [ -n "$TMPDIR_ADD" ]; then
+ TMPWORKINGDIRECTORY="${TMPWORKINGDIRECTORY}/${TMPDIR_ADD}"
+ mkdir -p "$TMPWORKINGDIRECTORY"
+ unset TMPDIR_ADD
+ export TMPDIR="$TMPWORKINGDIRECTORY"
+ fi
msgninfo "Preparing environment for ${0##*/} in ${TMPWORKINGDIRECTORY}…"
+ # Setup coreutils on BSD systems
+ mkdir "${TMPWORKINGDIRECTORY}/bin"
+ for prefix in gnu g; do
+ for command in stat touch sed cp tr sha1sum sha256sum md5sum sha512sum grep date wc chmod head readlink tar expr base64; do
+ if command -v $prefix$command 2>/dev/null >/dev/null; then
+ [ -e "${TMPWORKINGDIRECTORY}/bin/$command" ] || ln -sf $(command -v $prefix$command) "${TMPWORKINGDIRECTORY}/bin/$command"
+ fi
+ done
+ done
+ export PATH="${TMPWORKINGDIRECTORY}/bin/:$PATH"
+
+
mkdir -m 700 "${TMPWORKINGDIRECTORY}/downloaded"
if [ "$(id -u)" = '0' ]; then
# relax permissions so that running as root with user switching works
fi
TESTDIRECTORY="$(readlink -f "$(dirname $0)")"
+ # Find the newest build directory (sets PROJECT_BINARY_DIR)
+ find_project_binary_dir
# allow overriding the default BUILDDIR location
SOURCEDIRECTORY="${APT_INTEGRATION_TESTS_SOURCE_DIR:-"${TESTDIRECTORY}/../../"}"
- BUILDDIRECTORY="${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}"
- LIBRARYPATH="${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}"
- METHODSDIR="${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}"
+ BUILDDIRECTORY="${APT_INTEGRATION_TESTS_BUILD_DIR:-"${PROJECT_BINARY_DIR}/cmdline"}"
+ LIBRARYPATH="${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}/../apt-pkg"}"
+ METHODSDIR="${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/../methods"}"
APTHELPERBINDIR="${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}"
- APTWEBSERVERBINDIR="${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}"
- APTINTERNALSOLVER="${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/apt-internal-solver"}"
- APTDUMPSOLVER="${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/apt-dump-solver"}"
+ APTWEBSERVERBINDIR="${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}/../test/interactive-helper"}"
+ APTFTPARCHIVEBINDIR="${APT_INTEGRATION_TESTS_FTPARCHIVE_BIN_DIR:-"${BUILDDIRECTORY}/../ftparchive"}"
+ APTINTERNALSOLVER="${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/solvers/apt"}"
+ APTDUMPSOLVER="${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/solvers/dump"}"
+ APTINTERNALPLANNER="${APT_INTEGRATION_TESTS_INTERNAL_PLANNER:-"${BUILDDIRECTORY}/planners/apt"}"
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
mkdir rootdir aptarchive keys
cd rootdir
mkdir -p etc/apt/apt.conf.d etc/apt/sources.list.d etc/apt/trusted.gpg.d etc/apt/preferences.d
- mkdir -p usr/bin var/cache var/lib var/log tmp
+ mkdir -p usr/bin var/cache var/lib var/log var/crash tmp
mkdir -p var/lib/dpkg/info var/lib/dpkg/updates var/lib/dpkg/triggers
+ mkdir -p usr/lib/apt/solvers usr/lib/apt/planners
touch var/lib/dpkg/available
- mkdir -p usr/lib/apt
ln -s "${METHODSDIR}" usr/lib/apt/methods
- if [ "$BUILDDIRECTORY" = "$LIBRARYPATH" ]; then
- mkdir -p usr/lib/apt/solvers
- ln -s "${BUILDDIRECTORY}/apt-dump-solver" usr/lib/apt/solvers/dump
- ln -s "${BUILDDIRECTORY}/apt-internal-solver" usr/lib/apt/solvers/apt
- echo "Dir::Bin::Solvers \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/solvers\";" > etc/apt/apt.conf.d/externalsolver.conf
- fi
+ ln -s "${APTDUMPSOLVER}" usr/lib/apt/solvers/dump
+ ln -s "${APTDUMPSOLVER}" usr/lib/apt/planners/dump
+ ln -s "${APTINTERNALSOLVER}" usr/lib/apt/solvers/apt
+ ln -s "${APTINTERNALPLANNER}" usr/lib/apt/planners/apt
+ echo "Dir::Bin::Solvers \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/solvers\";" >> ../aptconfig.conf
+ echo "Dir::Bin::Planners \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/planners\";" >> ../aptconfig.conf
# use the autoremove from the BUILDDIRECTORY if its there, otherwise
# system
- if [ -e "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" ]; then
- ln -s "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" etc/apt/apt.conf.d/01autoremove
+ if [ -z "${APT_INTEGRATION_TESTS_SOURCE_DIR}" ]; then
+ ln -s "${SOURCEDIRECTORY}/debian/apt.conf.autoremove" etc/apt/apt.conf.d/01autoremove
else
ln -s /etc/apt/apt.conf.d/01autoremove etc/apt/apt.conf.d/01autoremove
fi
if [ -f "${TESTDIRECTORY}/${SOURCESSFILE}" ]; then
cp "${TESTDIRECTORY}/${SOURCESSFILE}" aptarchive/Sources
fi
- for key in $(find "$TESTDIRECTORY" -name '*.pub' -o -name '*.sec'); do
- cp "$key" keys/
- chmod 644 "$key"
- done
+ find "$TESTDIRECTORY" \( -name '*.pub' -o -name '*.sec' \) -exec cp '{}' keys/ \;
+ chmod 644 keys/*
ln -s "${TMPWORKINGDIRECTORY}/keys/joesixpack.pub" rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
- echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" > aptconfig.conf
- echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
+ echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
+ echo "Dir::Etc \"etc\";" >> aptconfig.conf
+ echo "Dir::State \"var/lib/apt\";" >> aptconfig.conf
+ echo "Dir::Cache \"var/cache/apt\";" >> aptconfig.conf
+ echo "Dir::Etc \"etc/apt\";" >> aptconfig.conf
+ echo "Dir::Log \"var/log/apt\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
echo "Dir::Bin::Methods \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/methods\";" >> aptconfig.conf
# either store apt-key were we can access it, even if we run it as a different user
# destroys coverage reporting though, so we disable changing user for the calling gpgv
echo "Dir::Bin::apt-key \"${BUILDDIRECTORY}/apt-key\";" >> aptconfig.conf
if [ "$(id -u)" = '0' ]; then
- echo 'Binary::gpgv::Debug::NoDropPrivs "true";' >>aptconfig.conf
+ echo 'Binary::gpgv::APT::Sandbox::User "root";' >> aptconfig.conf
+ # same for the solver executables
+ echo 'APT::Solver::RunAsUser "root";' >> aptconfig.conf
+ echo 'APT::Planner::RunAsUser "root";' >> aptconfig.conf
fi
cat > "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" <<EOF
#!/bin/sh
set -e
-if [ -r "${TMPWORKINGDIRECTORY}/noopchroot.so" ]; then
+if [ -r '${TMPWORKINGDIRECTORY}/noopchroot.so' ]; then
if [ -n "\$LD_LIBRARY_PATH" ]; then
- export LD_LIBRARY_PATH="${TMPWORKINGDIRECTORY}:${LD_LIBRARY_PATH}"
+ export LD_LIBRARY_PATH='${TMPWORKINGDIRECTORY}:'"\${LD_LIBRARY_PATH}"
else
- export LD_LIBRARY_PATH="${TMPWORKINGDIRECTORY}"
+ export LD_LIBRARY_PATH='${TMPWORKINGDIRECTORY}'
fi
if [ -n "\$LD_PRELOAD" ]; then
export LD_PRELOAD="noopchroot.so \${LD_PRELOAD}"
EOF
cp "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg"
cat >> "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" <<EOF
-exec fakeroot "${DPKG:-dpkg}" --root="${TMPWORKINGDIRECTORY}/rootdir" \\
- --log="${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log" \\
+exec fakeroot '${DPKG:-dpkg}' --root='${TMPWORKINGDIRECTORY}/rootdir' \\
+ --admindir="${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg" \\
+ --log='${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log' \\
--force-not-root --force-bad-path "\$@"
EOF
cat >> "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg" <<EOF
-exec fakeroot gdb --quiet -ex run "${DPKG:-dpkg}" --args "${DPKG:-dpkg}" --root="${TMPWORKINGDIRECTORY}/rootdir" \\
- --log="${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log" \\
+exec fakeroot gdb --quiet -ex run '${DPKG:-dpkg}' --args '${DPKG:-dpkg}' --root='${TMPWORKINGDIRECTORY}/rootdir' \\
+ --admindir="${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg" \\
+ --log='${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log' \\
--force-not-root --force-bad-path "\$@"
EOF
chmod +x "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg"
fi
echo "Acquire::https::CaInfo \"${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem\";" > rootdir/etc/apt/apt.conf.d/99https
echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
+ export APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=no
echo 'Acquire::Connect::AddrConfig "false";' > rootdir/etc/apt/apt.conf.d/connect-addrconfig
+
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
- confighashes 'SHA1' # these are tests, not security best-practices
+ confighashes 'SHA256' # these are tests, not security best-practices
# create some files in /tmp and look at user/group to get what this means
TEST_DEFAULT_USER="$(id -un)"
# cleanup the environment a bit
# prefer our apt binaries over the system apt binaries
export PATH="${BUILDDIRECTORY}:${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
- export LC_ALL=C.UTF-8
+ export LC_ALL=C
unset LANGUAGE APT_CONFIG
unset GREP_OPTIONS DEB_BUILD_PROFILES
unset http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy
+
+ # If gpgv supports --weak-digest, pass it to make sure we can disable SHA1
+ if aptkey verify --weak-digest SHA1 --help 2>/dev/null >/dev/null; then
+ echo 'Acquire::gpgv::Options { "--weak-digest"; "sha1"; };' > rootdir/etc/apt/apt.conf.d/no-sha1
+ fi
+
+ # most tests just need one signed Release file, not both
+ export APT_DONT_SIGN='Release.gpg'
+
+ if [ -r "${TESTDIRECTORY}/extra-environment" ]; then
+ . "${TESTDIRECTORY}/extra-environment"
+ fi
+
msgdone "info"
}
rm -f rootdir/etc/apt/apt.conf.d/00foreigndpkg
if command dpkg --assert-multi-arch >/dev/null 2>&1 ; then
local ARCHS="$(getarchitectures)"
- if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
- DPKGARCH="$(dpkg --print-architecture)"
- for ARCH in ${ARCHS}; do
- if [ "${ARCH}" != "${DPKGARCH}" ]; then
- if ! dpkg --add-architecture ${ARCH} >/dev/null 2>&1; then
- # old-style used e.g. in Ubuntu-P – and as it seems travis
- echo "DPKG::options:: \"--foreign-architecture\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
- echo "DPKG::options:: \"${ARCH}\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
- fi
+ local DPKGARCH="$(dpkg --print-architecture)"
+ # this ensures that even if multi-arch isn't active in the view
+ # of apt, given that dpkg can't be told which arch is native
+ # the arch apt treats as native might be foreign for dpkg
+ for ARCH in ${ARCHS}; do
+ if [ "${ARCH}" != "${DPKGARCH}" ]; then
+ if ! dpkg --add-architecture ${ARCH} >/dev/null 2>&1; then
+ # old-style used e.g. in Ubuntu-P – and as it seems travis
+ echo "DPKG::options:: \"--foreign-architecture\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
+ echo "DPKG::options:: \"${ARCH}\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
fi
- done
+ fi
+ done
+ # if multi-arch make sure dpkg can detect itself as capable of it
+ if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
if [ "0" = "$(dpkg -l dpkg 2> /dev/null | grep '^i' | wc -l)" ]; then
# dpkg doesn't really check the version as long as it is fully installed,
# but just to be sure we choose one above the required version
#include <stdlib.h>
#include <string.h>
#include <dlfcn.h>
-#include <limits.h>
static char * chrootdir = NULL;
if (chrootdir == NULL || strncmp(file, "/var/lib/dpkg/", strlen("/var/lib/dpkg/")) != 0)
return func_execvp(file, argv);
printf("REWRITE execvp call %s into %s\n", file, chrootdir);
- char newfile[PATH_MAX];
- snprintf(newfile, sizeof(newfile), "%s/%s", chrootdir, file);
+ char *newfile;
+ if (asprintf(&newfile, "%s%s", chrootdir, file) == -1) {
+ perror("asprintf");
+ return -1;
+ }
char const * const baseadmindir = "/var/lib/dpkg";
- char admindir[PATH_MAX];
- snprintf(admindir, sizeof(admindir), "%s/%s", chrootdir, baseadmindir);
+ char *admindir;
+ if (asprintf(&admindir, "%s%s", chrootdir, baseadmindir) == -1) {
+ perror("asprintf");
+ return -1;
+ }
setenv("DPKG_ADMINDIR", admindir, 1);
return func_execvp(newfile, argv);
}
EOF
- testsuccess --nomsg gcc -fPIC -shared -o noopchroot.so noopchroot.c -ldl
+ if cc -ldl 2>&1 | grep -q dl; then
+ testempty --nomsg cc -Wall -Wextra -fPIC -shared -o noopchroot.so noopchroot.c
+ else
+ testempty --nomsg cc -Wall -Wextra -fPIC -shared -o noopchroot.so noopchroot.c -ldl
+ fi
}
configcompression() {
+ if [ "$1" = 'ALL' ]; then
+ configcompression '.' $(aptconfig dump APT::Compressor --format '%t %v%n' | sed -n 's#^Extension \.\(.*\)$#\1#p')
+ return
+ fi
+ local CMD='apthelper cat-file -C'
while [ -n "$1" ]; do
case "$1" in
'.') printf ".\t.\tcat\n";;
- 'gz') printf "gzip\tgz\tgzip\n";;
- 'bz2') printf "bzip2\tbz2\tbzip2\n";;
- 'lzma') printf "lzma\tlzma\txz --format=lzma\n";;
- 'xz') printf "xz\txz\txz\n";;
- *) printf "$1\t$1\t$1\n";;
+ 'gz') printf "gzip\tgz\t$CMD $1\n";;
+ 'bz2') printf "bzip2\tbz2\t$CMD $1\n";;
+ *) printf "$1\t$1\t$CMD $1\n";;
esac
shift
done > "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf"
}
forcecompressor() {
COMPRESSOR="$1"
- COMPRESSOR_CMD="$1"
+ COMPRESS="$1"
+ COMPRESSOR_CMD="apthelper cat-file -C $1"
case $COMPRESSOR in
gzip) COMPRESS='gz';;
bzip2) COMPRESS='bz2';;
- lzma) COMPRESS='lzma';;
- xz) COMPRESS='xz';;
- *) msgdie "Compressor $COMPRESSOR is unknown to framework, so can't be forced by forcecompressor!";;
esac
local CONFFILE="${TMPWORKINGDIRECTORY}/rootdir/etc/apt/apt.conf.d/00force-compressor"
echo "Acquire::CompressionTypes::Order { \"${COMPRESS}\"; };
-Dir::Bin::uncompressed \"/does/not/exist\";
-Dir::Bin::gzip \"/does/not/exist\";
-Dir::Bin::bzip2 \"/does/not/exist\";
-Dir::Bin::lzma \"/does/not/exist\";
-Dir::Bin::xz \"/does/not/exist\";" > "$CONFFILE"
- if [ -e "/bin/${COMPRESSOR}" ]; then
- echo "Dir::Bin::${COMPRESSOR} \"/bin/${COMPRESSOR}\";" >> "$CONFFILE"
- elif [ -e "/usr/bin/${COMPRESSOR}" ]; then
- echo "Dir::Bin::${COMPRESSOR} \"/usr/bin/${COMPRESSOR}\";" >> "$CONFFILE"
- elif [ "${COMPRESSOR}" = 'lzma' ]; then
- echo 'Dir::Bin::xz "/usr/bin/xz";' >> "$CONFFILE"
- COMPRESSOR_CMD='xz --format=lzma'
- else
- msgtest 'Test for availability of compressor' "${COMPRESSOR}"
- msgfail "${COMPRESSOR} not available"
- fi
-}
-
-setupsimplenativepackage() {
- local NAME="$1"
- local ARCH="$2"
- local VERSION="$3"
- local RELEASE="${4:-unstable}"
- local DEPENDENCIES="$5"
- local DESCRIPTION="${6:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
- If you find such a package installed on your system,
- something went horribly wrong! They are autogenerated
- und used only by testcases and serve no other purpose…"}"
-
- local SECTION="${7:-others}"
- local DISTSECTION
- if [ "$SECTION" = "${SECTION#*/}" ]; then
- DISTSECTION="main"
- else
- DISTSECTION="${SECTION%/*}"
- fi
- local BUILDDIR=incoming/${NAME}-${VERSION}
- mkdir -p ${BUILDDIR}/debian/source
- cd ${BUILDDIR}
- echo "* most suckless software product ever" > FEATURES
- test -e debian/copyright || echo "Copyleft by Joe Sixpack $(date +%Y)" > debian/copyright
- test -e debian/changelog || echo "$NAME ($VERSION) $RELEASE; urgency=low
-
- * Initial release
-
- -- Joe Sixpack <joe@example.org> $(date -R)" > debian/changelog
- test -e debian/control || echo "Source: $NAME
-Section: $SECTION
-Priority: optional
-Maintainer: Joe Sixpack <joe@example.org>
-Build-Depends: debhelper (>= 7)
-Standards-Version: 3.9.1
-
-Package: $NAME" > debian/control
- if [ "$ARCH" = 'all' ]; then
- echo "Architecture: all" >> debian/control
- else
- echo "Architecture: any" >> debian/control
- fi
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> debian/control
- echo "Description: $DESCRIPTION" >> debian/control
-
- test -e debian/compat || echo "7" > debian/compat
- test -e debian/source/format || echo "3.0 (native)" > debian/source/format
- test -e debian/rules || cp /usr/share/doc/debhelper/examples/rules.tiny debian/rules
- cd - > /dev/null
+Dir::Bin::uncompressed \"/does/not/exist\";" > "$CONFFILE"
+ for COMP in $(aptconfig dump 'APT::Compressor' --format '%f%n' | cut -d':' -f 5 | uniq); do
+ if [ -z "$COMP" -o "$COMP" = '.' -o "$COMP" = "$COMPRESSOR" ]; then continue; fi
+ echo "Dir::Bin::${COMP} \"/does/not/exist\";" >> "$CONFFILE"
+ echo "APT::Compressor::${COMP}::Name \"${COMP}-disabled\";" >> "$CONFFILE"
+ done
}
-buildsimplenativepackage() {
+_setupsimplenativepackage() {
local NAME="$1"
- local NM
- if [ "$(echo "$NAME" | cut -c 1-3)" = 'lib' ]; then
- NM="$(echo "$NAME" | cut -c 1-4)"
- else
- NM="$(echo "$NAME" | cut -c 1)"
- fi
local ARCH="$2"
local VERSION="$3"
local RELEASE="${4:-unstable}"
fi
local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
- msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
mkdir -p "$BUILDDIR/debian/source"
echo "* most suckless software product ever" > "${BUILDDIR}/FEATURES"
echo "#!/bin/sh
echo '$NAME says \"Hello!\"'" > "${BUILDDIR}/${NAME}"
- echo "Copyleft by Joe Sixpack $(date +%Y)" > "${BUILDDIR}/debian/copyright"
+ echo "Copyleft by Joe Sixpack $(date -u +%Y)" > "${BUILDDIR}/debian/copyright"
echo "$NAME ($VERSION) $RELEASE; urgency=low
* Initial release
- -- Joe Sixpack <joe@example.org> $(date -R)" > "${BUILDDIR}/debian/changelog"
+ -- Joe Sixpack <joe@example.org> $(date -u -R)" > "${BUILDDIR}/debian/changelog"
{
echo "Source: $NAME
Priority: $PRIORITY
} > "${BUILDDIR}/debian/control"
echo '3.0 (native)' > "${BUILDDIR}/debian/source/format"
+}
+
+make_tiny_rules() {
+ local OUT="$1"
+ if command -v gmake >/dev/null 2>&1; then
+ [ -e ${TMPWORKINGDIRECTORY}/bin/make ] || ln -s $(command -v gmake) ${TMPWORKINGDIRECTORY}/bin/make
+ echo "#!${TMPWORKINGDIRECTORY}/bin/make -f" > "$OUT"
+ else
+ echo '#!/usr/bin/make -f' > "$OUT"
+ fi
+ echo '%:' >> "$OUT"
+ echo ' dh $@' >> "$OUT"
+}
+
+setupsimplenativepackage() {
+ _setupsimplenativepackage "$@"
+ local NAME="$1"
+ local VERSION="$3"
+ local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
+ test -e "${BUILDDIR}/debian/compat" || echo '7' > "${BUILDDIR}/debian/compat"
+ test -e "${BUILDDIR}/debian/rules" || make_tiny_rules "${BUILDDIR}/debian/rules"
+}
+
+buildsimplenativepackage() {
+ local NAME="$1"
+ local ARCH="$2"
+ local VERSION="$3"
+ local RELEASE="${4:-unstable}"
+ local DEPENDENCIES="$5"
+ local DESCRIPTION="$6"
+ local SECTION="${7:-others}"
+ local PRIORITY="${8:-optional}"
+ local FILE_TREE="$9"
+ local COMPRESS_TYPE="${10:-gzip}"
+ local DISTSECTION
+ if [ "$SECTION" = "${SECTION#*/}" ]; then
+ DISTSECTION="main"
+ else
+ DISTSECTION="${SECTION%/*}"
+ fi
+ local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
+ msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
+ _setupsimplenativepackage "$@"
cd "${BUILDDIR}/.."
testsuccess --nomsg dpkg-source -b ${NAME}-${VERSION}
cd - >/dev/null
echo "pool/${NAME}_${VERSION}_${arch}.deb" >> "${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist"
done
+ local NM
+ if [ "$(echo "$NAME" | cut -c 1-3)" = 'lib' ]; then
+ NM="$(echo "$NAME" | cut -c 1-4)"
+ else
+ NM="$(echo "$NAME" | cut -c 1)"
+ fi
local CHANGEPATH="${BUILDDIR}/../${DISTSECTION}/${NM}/${NAME}/${NAME}_${VERSION}"
mkdir -p "$CHANGEPATH"
cp "${BUILDDIR}/debian/changelog" "$CHANGEPATH"
}
insertsource() {
- local RELEASE="$1"
+ local RELEASES="$1"
local NAME="$2"
local ARCH="$3"
local VERSION="$4"
local DEPENDENCIES="$5"
- local BINARY="${6:-$NAME}"
+ local BINARY="${6:-$NAME}"
local ARCHS=""
- local SPATH="aptarchive/dists/${RELEASE}/main/source"
- mkdir -p $SPATH
- local FILE="${SPATH}/Sources"
- local DSCFILE="${NAME}_${VERSION}.dsc"
- local TARFILE="${NAME}_${VERSION}.tar.gz"
- echo "Package: $NAME
+ for RELEASE in $(printf '%s' "$RELEASES" | tr ',' '\n'); do
+ local SPATH="aptarchive/dists/${RELEASE}/main/source"
+ mkdir -p $SPATH
+ local FILE="${SPATH}/Sources"
+ local DSCFILE="${NAME}_${VERSION}.dsc"
+ local TARFILE="${NAME}_${VERSION}.tar.gz"
+ echo "Package: $NAME
Binary: $BINARY
Version: $VERSION
Maintainer: Joe Sixpack <joe@example.org>
Architecture: $ARCH" >> $FILE
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> "$FILE"
- echo "Files:
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> "$FILE"
+ echo "Files:
$(echo -n "$DSCFILE" | md5sum | cut -d' ' -f 1) $(echo -n "$DSCFILE" | wc -c) "$DSCFILE"
$(echo -n "$TARFILE" | md5sum | cut -d' ' -f 1) $(echo -n "$TARFILE" | wc -c) "$TARFILE"
Checksums-Sha256:
$(echo -n "$DSCFILE" | sha256sum | cut -d' ' -f 1) $(echo -n "$DSCFILE" | wc -c) "$DSCFILE"
$(echo -n "$TARFILE" | sha256sum | cut -d' ' -f 1) $(echo -n "$TARFILE" | wc -c) "$TARFILE"
" >> "$FILE"
+ done
}
insertinstalledpackage() {
}
compressfile() {
- cat "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf" | while read compressor extension command; do
+ while read compressor extension command; do
if [ "$compressor" = '.' ]; then
if [ -n "$2" ]; then
touch -d "$2" "$1"
if [ -n "$2" ]; then
touch -d "$2" "${1}.${extension}"
fi
- done
+ done < "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf"
}
# can be overridden by testcases for their pleasure
fi
if [ -n "$DATE" -a "$DATE" != "now" ]; then
for release in $(find ./aptarchive -name 'Release'); do
- sed -i "s/^Date: .*$/Date: $(date -d "$DATE" '+%a, %d %b %Y %H:%M:%S %Z')/" "$release"
+ sed -i "s/^Date: .*$/Date: $(date -u -d "$DATE" -R)/" "$release"
touch -d "$DATE" "$release"
done
fi
if [ -n "$VALIDUNTIL" ]; then
sed -i "/^Date: / a\
-Valid-Until: $(date -d "$VALIDUNTIL" '+%a, %d %b %Y %H:%M:%S %Z')" $(find ./aptarchive -name 'Release')
+Valid-Until: $(date -u -d "$VALIDUNTIL" -R)" $(find ./aptarchive -name 'Release')
fi
msgdone "info"
}
}
signreleasefiles() {
- local SIGNER="${1:-Joe Sixpack}"
+ local SIGNERS="${1:-Joe Sixpack}"
local REPODIR="${2:-aptarchive}"
- local KEY="keys/$(echo "$SIGNER" | tr 'A-Z' 'a-z' | sed 's# ##g')"
- local GPG="aptkey --quiet --keyring ${KEY}.pub --secret-keyring ${KEY}.sec --readonly adv --batch --yes"
- msgninfo "\tSign archive with $SIGNER key $KEY… "
+ if [ -n "$1" ]; then shift; fi
+ if [ -n "$1" ]; then shift; fi
+ local KEY="keys/$(echo "$SIGNERS" | tr 'A-Z' 'a-z' | tr -d ' ,')"
+ msgninfo "\tSign archive with $SIGNERS key $KEY… "
local REXKEY='keys/rexexpired'
local SECEXPIREBAK="${REXKEY}.sec.bak"
local PUBEXPIREBAK="${REXKEY}.pub.bak"
- if [ "${SIGNER}" = 'Rex Expired' ]; then
- # the key is expired, so gpg doesn't allow to sign with and the --faked-system-time
- # option doesn't exist anymore (and using faketime would add a new obscure dependency)
- # therefore we 'temporary' make the key not expired and restore a backup after signing
- cp "${REXKEY}.sec" "$SECEXPIREBAK"
- cp "${REXKEY}.pub" "$PUBEXPIREBAK"
- local SECUNEXPIRED="${REXKEY}.sec.unexpired"
- local PUBUNEXPIRED="${REXKEY}.pub.unexpired"
- if [ -f "$SECUNEXPIRED" ] && [ -f "$PUBUNEXPIRED" ]; then
- cp "$SECUNEXPIRED" "${REXKEY}.sec"
- cp "$PUBUNEXPIRED" "${REXKEY}.pub"
- else
- if ! printf "expire\n1w\nsave\n" | $GPG --default-key "$SIGNER" --command-fd 0 --edit-key "${SIGNER}" >setexpire.gpg 2>&1; then
- cat setexpire.gpg
- exit 1
+ local SIGUSERS=""
+ while [ -n "${SIGNERS%%,*}" ]; do
+ local SIGNER="${SIGNERS%%,*}"
+ if [ "${SIGNERS}" = "${SIGNER}" ]; then
+ SIGNERS=""
+ fi
+ SIGNERS="${SIGNERS#*,}"
+ # FIXME: This should be the full name, but we can't encode the space properly currently
+ SIGUSERS="${SIGUSERS} -u ${SIGNER#* }"
+ if [ "${SIGNER}" = 'Rex Expired' ]; then
+ # the key is expired, so gpg doesn't allow to sign with and the --faked-system-time
+ # option doesn't exist anymore (and using faketime would add a new obscure dependency)
+ # therefore we 'temporary' make the key not expired and restore a backup after signing
+ cp "${REXKEY}.sec" "$SECEXPIREBAK"
+ cp "${REXKEY}.pub" "$PUBEXPIREBAK"
+ local SECUNEXPIRED="${REXKEY}.sec.unexpired"
+ local PUBUNEXPIRED="${REXKEY}.pub.unexpired"
+ if [ -f "$SECUNEXPIRED" ] && [ -f "$PUBUNEXPIRED" ]; then
+ cp "$SECUNEXPIRED" "${REXKEY}.sec"
+ cp "$PUBUNEXPIRED" "${REXKEY}.pub"
+ else
+ if ! printf "expire\n1w\nsave\n" | aptkey --quiet --keyring "${REXKEY}.pub" --secret-keyring "${REXKEY}.sec" \
+ --readonly adv --batch --yes --digest-algo "${APT_TESTS_DIGEST_ALGO:-SHA512}" \
+ --default-key "$SIGNER" --command-fd 0 --edit-key "${SIGNER}" >setexpire.gpg 2>&1; then
+ cat setexpire.gpg
+ exit 1
+ fi
+ cp "${REXKEY}.sec" "$SECUNEXPIRED"
+ cp "${REXKEY}.pub" "$PUBUNEXPIRED"
fi
- cp "${REXKEY}.sec" "$SECUNEXPIRED"
- cp "${REXKEY}.pub" "$PUBUNEXPIRED"
fi
+ if [ ! -e "${KEY}.pub" ]; then
+ local K="keys/$(echo "$SIGNER" | tr 'A-Z' 'a-z' | tr -d ' ,')"
+ cat "${K}.pub" >> "${KEY}.new.pub"
+ cat "${K}.sec" >> "${KEY}.new.sec"
+ fi
+ done
+ if [ ! -e "${KEY}.pub" ]; then
+ mv "${KEY}.new.pub" "${KEY}.pub"
+ mv "${KEY}.new.sec" "${KEY}.sec"
fi
+ local GPG="aptkey --quiet --keyring ${KEY}.pub --secret-keyring ${KEY}.sec --readonly adv --batch --yes --digest-algo ${APT_TESTS_DIGEST_ALGO:-SHA512}"
for RELEASE in $(find "${REPODIR}/" -name Release); do
- $GPG --default-key "$SIGNER" --armor --detach-sign --sign --output "${RELEASE}.gpg" "${RELEASE}"
- local INRELEASE="$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')"
- $GPG --default-key "$SIGNER" --clearsign --output "$INRELEASE" "$RELEASE"
# we might have set a specific date for the Release file, so copy it
- touch -d "$(stat --format "%y" ${RELEASE})" "${RELEASE}.gpg" "${INRELEASE}"
+ local DATE="$(stat --format "%y" "${RELEASE}")"
+ if [ "$APT_DONT_SIGN" = 'Release.gpg' ]; then
+ rm -f "${RELEASE}.gpg"
+ else
+ testsuccess $GPG "$@" $SIGUSERS --armor --detach-sign --sign --output "${RELEASE}.gpg" "${RELEASE}"
+ touch -d "$DATE" "${RELEASE}.gpg"
+ fi
+ local INRELEASE="${RELEASE%/*}/InRelease"
+ if [ "$APT_DONT_SIGN" = 'InRelease' ]; then
+ rm -f "$INRELEASE"
+ else
+ testsuccess $GPG "$@" $SIGUSERS --clearsign --output "$INRELEASE" "$RELEASE"
+ touch -d "$DATE" "${INRELEASE}"
+ fi
done
if [ -f "$SECEXPIREBAK" ] && [ -f "$PUBEXPIREBAK" ]; then
mv -f "$SECEXPIREBAK" "${REXKEY}.sec"
}
redatereleasefiles() {
- local DATE="$(date -d "$1" '+%a, %d %b %Y %H:%M:%S %Z')"
+ local DATE="$(date -u -d "$1" -R)"
for release in $(find aptarchive/ -name 'Release'); do
sed -i "s/^Date: .*$/Date: ${DATE}/" "$release"
touch -d "$DATE" "$release"
local APTARCHIVE2="copy://$(readlink -f "${TMPWORKINGDIRECTORY}/aptarchive" | sed 's# #%20#g')"
for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
sed -i $LIST -e "s#$APTARCHIVE#${1}#" -e "s#$APTARCHIVE2#${1}#" \
- -e "s#http://localhost:${APTHTTPPORT}/#${1}#" \
- -e "s#https://localhost:${APTHTTPSPORT}/#${1}#"
+ -e "s#http://[^@]*@\?localhost:${APTHTTPPORT}/\?#${1}#" \
+ -e "s#https://[^@]*@\?localhost:${APTHTTPSPORT}/\?#${1}#"
done
}
cd aptarchive
local LOG="webserver.log"
if ! aptwebserver --port 0 -o aptwebserver::fork=1 -o aptwebserver::portfile='aptwebserver.port' "$@" >$LOG 2>&1 ; then
- cat $LOG
+ cat "$LOG"
false
fi
waitforpidfile aptwebserver.pid
}
changetohttpswebserver() {
- if ! command -v stunnel4 >/dev/null 2>&1; then
+ local stunnel4
+ if command -v stunnel4 >/dev/null 2>&1; then
+ stunnel4=stunnel4
+ elif command -v stunnel >/dev/null 2>&1; then
+ stunnel4=stunnel
+ else
msgdie 'You need to install stunnel4 for https testcases'
fi
if [ ! -e "${TMPWORKINGDIRECTORY}/aptarchive/aptwebserver.pid" ]; then
accept = 0
connect = $APTHTTPPORT
" > "${TMPWORKINGDIRECTORY}/stunnel.conf"
- stunnel4 "${TMPWORKINGDIRECTORY}/stunnel.conf"
+ $stunnel4 "${TMPWORKINGDIRECTORY}/stunnel.conf"
waitforpidfile "${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid"
local PID="$(cat "${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid")"
if [ -z "$PID" ]; then
- msgdie 'Could not fork stunnel4 successfully'
+ msgdie 'Could not fork $stunnel4 successfully'
fi
addtrap 'prefix' "kill ${PID};"
- APTHTTPSPORT="$(lsof -i | awk "/^stunnel4 / && \$2 == \"${PID}\" {print \$9; exit; }" | cut -d':' -f 2)"
+ APTHTTPSPORT="$(lsof -i -n | awk "/^$stunnel4 / && \$2 == \"${PID}\" {print \$9; exit; }" | cut -d':' -f 2)"
webserverconfig 'aptwebserver::port::https' "$APTHTTPSPORT" "https://localhost:${APTHTTPSPORT}"
rewritesourceslist "https://localhost:${APTHTTPSPORT}/"
}
# start with an unmounted disk
mv "${CD}" "${CD}-unmounted"
# we don't want the disk to be modifiable
- addtrap 'prefix' "chmod -f -R +w \"$PWD/rootdir/media/cdrom/dists/\" \"$PWD/rootdir/media/cdrom-unmounted/dists/\" || true;"
+ addtrap 'prefix' "chmod -f -R +w '$(escape_shell "$PWD/rootdir/media/cdrom/dists/")' '$(escape_shell "$PWD/rootdir/media/cdrom-unmounted/dists/")' || true;"
chmod -R 555 rootdir/media/cdrom-unmounted/dists
}
testempty() {
msggroup 'testempty'
- msgtest "Test for no output of" "$*"
+ if [ "$1" = '--nomsg' ]; then
+ shift
+ else
+ msgtest "Test for no output of" "$*"
+ fi
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testempty.comparefile"
- if ("$@" >"$COMPAREFILE" 2>&1 || true) && test ! -s "$COMPAREFILE"; then
+ if "$@" >"$COMPAREFILE" 2>&1 && test ! -s "$COMPAREFILE"; then
msgpass
else
msgfailoutput '' "$COMPAREFILE" "$@"
msggroup
}
+catfile() {
+ if [ "${1##*.}" = 'deb' ]; then
+ stat >&2 "$1" || true
+ file >&2 "$1" || true
+ else
+ cat >&2 "$1" || true
+ fi
+}
msgfailoutput() {
msgreportheader 'msgfailoutput'
local MSG="$1"
local OUTPUT="$2"
shift 2
- if [ "$1" = 'grep' ]; then
+ local CMD="$1"
+ if [ "$1" = 'grep' -o "$1" = 'tail' -o "$1" = 'head' ]; then
echo >&2
while [ -n "$2" ]; do shift; done
echo "#### Complete file: $1 ####"
- cat >&2 "$1" || true
- echo '#### grep output ####'
+ catfile "$1"
+ echo "#### $CMD output ####"
elif [ "$1" = 'test' ]; then
echo >&2
# doesn't support ! or non-file flags
ls >&2 "$2" || true
elif test -e "$2"; then
echo "#### Complete file: $2 ####"
- cat >&2 "$2" || true
+ catfile "$2"
fi
fi
}
msgfailoutputstatfile "$2" "$3"
done
echo '#### test output ####'
+ elif [ "$1" = 'cmp' ]; then
+ echo >&2
+ while [ -n "$2" ]; do
+ echo "#### Complete file: $2 ####"
+ catfile "$2"
+ shift
+ done
+ echo '#### cmp output ####'
fi
- cat >&2 "$OUTPUT"
+ catfile "$OUTPUT"
msgfail "$MSG"
}
local EXITCODE=$?
if expr match "$1" '^apt.*' >/dev/null; then
if [ "$1" = 'aptkey' ]; then
- if grep -q -E " Can't check signature: " "$OUTPUT" || \
- grep -q -E " BAD signature from " "$OUTPUT"; then
+ if grep -q " Can't check signature:
+ BAD signature from
+ signature could not be verified" "$OUTPUT"; then
msgpass
else
msgfailoutput "run failed with exitcode ${EXITCODE}, but no signature error" "$OUTPUT" "$@"
msggroup
}
+mapkeynametokeyid() {
+ while [ -n "$1" ]; do
+ case "$1" in
+ *Joe*|*Sixpack*|newarchive) echo '5A90D141DBAC8DAE';;
+ *Rex*|*Expired*) echo '4BC0A39C27CE74F9';;
+ *Marvin*|*Paranoid*) echo 'E8525D47528144E2';;
+ oldarchive) echo 'FDD2DB85F68C85A3';;
+ *) echo 'UNKNOWN KEY';;
+ esac
+ shift
+ done
+}
+testaptkeys() {
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/aptkeylist.output"
+ if ! aptkey list --with-colon | grep '^pub' | cut -d':' -f 5 > "$OUTPUT"; then
+ echo -n > "$OUTPUT"
+ fi
+ testfileequal "$OUTPUT" "$(mapkeynametokeyid "$@")"
+}
+
pause() {
echo "STOPPED execution. Press enter to continue"
local IGNORE
read IGNORE
}
+logcurrentarchivedirectory() {
+ find "${TMPWORKINGDIRECTORY}/aptarchive/dists" -type f | while read line; do
+ stat --format '%U:%G:%a:%n' "$line"
+ done | sort > "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst"
+}
listcurrentlistsdirectory() {
{
find rootdir/var/lib/apt/lists -maxdepth 1 -type d | while read line; do
done
} | sort
}
+forallsupportedcompressors() {
+ rm -f "${TMPWORKINGDIRECTORY}/rootdir/etc/apt/apt.conf.d/00force-compressor"
+ for COMP in $(aptconfig dump 'APT::Compressor' --format '%f%n' | cut -d':' -f 5 | uniq); do
+ if [ -z "$COMP" -o "$COMP" = '.' ]; then continue; fi
+ "$@" "$COMP"
+ done
+}
### convenience hacks ###
mkdir() {
### general things about commands executed without writing the test every time.
aptautotest() {
+ if [ $# -lt 3 ]; then return; fi
local TESTCALL="$1"
local CMD="$2"
local FIRSTOPT="$3"
- local AUTOTEST="aptautotest_$(echo "${CMD##*/}_${FIRSTOPT}" | tr -d '-')"
+ shift 2
+ for i in "$@"; do
+ if ! expr match "$i" '^-' >/dev/null 2>&1; then
+ FIRSTOPT="$i"
+ break
+ fi
+ done
+ shift
+ local AUTOTEST="aptautotest_$(echo "${CMD##*/}_${FIRSTOPT}" | tr -d -c 'A-za-z0-9')"
if command -v $AUTOTEST >/dev/null; then
- shift 3
# save and restore the *.output files from other tests
# as we might otherwise override them in these automatic tests
rm -rf "${TMPWORKINGDIRECTORY}/rootdir/tmp-before"
# failure cases can retain partial files and such
testempty find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists/partial" -mindepth 1 ! \( -name 'lock' -o -name '*.FAILED' \)
fi
+ if [ -s "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst" ]; then
+ testfileequal "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst" \
+ "$(find "${TMPWORKINGDIRECTORY}/aptarchive/dists" -type f | while read line; do stat --format '%U:%G:%a:%n' "$line"; done | sort)"
+ fi
}
aptautotest_apt_update() { aptautotest_aptget_update "$@"; }
aptautotest_aptcdrom_add() { aptautotest_aptget_update "$@"; }
aptautotest_apt_install() { testaptautotestnodpkgwarning "$@"; }
aptautotest_apt_remove() { testaptautotestnodpkgwarning "$@"; }
aptautotest_apt_purge() { testaptautotestnodpkgwarning "$@"; }
+
+testaptmarknodefaultsections() {
+ testfailure grep '^Auto-Installed: 0$' "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/extended_states"
+}
+aptautotest_aptmark_auto() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptmark_manual() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptget_markauto() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptget_markmanual() { testaptmarknodefaultsections "$@"; }
projects / apt.git / blobdiff