+#: methods/server.cc
+msgid "Waiting for headers"
+msgstr "等待標頭"
+
+#: methods/server.cc
+msgid "Bad header line"
+msgstr "標頭行錯誤"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid reply header"
+msgstr "HTTP 伺服器傳送了一個無效的回覆標頭"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid Content-Length header"
+msgstr "HTTP 伺服器傳送了一個無效的 Content-Length 標頭"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid Content-Range header"
+msgstr "HTTP 伺服器傳送了一個無效的 Content-Range 標頭"
+
+#: methods/server.cc
+msgid "This HTTP server has broken range support"
+msgstr "這個 HTTP 伺服器的範圍支援有問題"
+
+#: methods/server.cc
+msgid "Unknown date format"
+msgstr "未知的資料格式"
+
+#: methods/server.cc
+msgid "Bad header data"
+msgstr "錯誤的標頭資料"
+
+#: methods/server.cc
+msgid "Connection failed"
+msgstr "連線失敗"
+
+#: methods/server.cc
+#, c-format
+msgid ""
+"Automatically disabled %s due to incorrect response from server/proxy. (man "
+"5 apt.conf)"
+msgstr ""
+
+#: methods/server.cc
+msgid "Internal error"
+msgstr "內部錯誤"
+
+#: methods/store.cc
+msgid "Empty files can't be valid archives"
+msgstr ""
+
+#: dselect/install:33
+msgid "Bad default setting!"
+msgstr "錯誤的預設設定！"
+
+#: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95
+#: dselect/install:106 dselect/update:45
+#, fuzzy
+msgid "Press [Enter] to continue."
+msgstr "請按 [Enter] 鍵以繼續進行。"
+
+#: dselect/install:92
+msgid "Do you want to erase any previously downloaded .deb files?"
+msgstr "您想移除所有先前下載的 .deb 檔嗎？"
+
+#: dselect/install:102
+#, fuzzy
+msgid "Some errors occurred while unpacking. Packages that were installed"
+msgstr "在解開套件時發生錯誤。我要準備設定"
+
+#: dselect/install:103
+#, fuzzy
+msgid "will be configured. This may result in duplicate errors"
+msgstr "套件已安裝過。這會造成重複錯誤"
+
+#: dselect/install:104
+msgid "or errors caused by missing dependencies. This is OK, only the errors"
+msgstr "或是因為沒有相依關係而造成錯誤。那麼這個錯誤是無關緊要的"
+
+#: dselect/install:105
+msgid ""
+"above this message are important. Please fix them and run [I]nstall again"
+msgstr "以上的訊息相當重要。請修正它們並重新執行安裝[I]"
+
+#: dselect/update:30
+msgid "Merging available information"
+msgstr "整合現有的資料"
+
+#: cmdline/apt-extracttemplates.cc
+#, fuzzy
+msgid ""
+"Usage: apt-extracttemplates file1 [file2 ...]\n"
+"\n"
+"apt-extracttemplates is used to extract config and template files\n"
+"from debian packages. It is used mainly by debconf(1) to prompt for\n"
+"configuration questions before installation of packages.\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#: cmdline/apt-extracttemplates.cc apt-pkg/contrib/fileutl.cc
+#, fuzzy, c-format
+msgid "Unable to mkstemp %s"
+msgstr "無法取得 %s 的狀態"
+
+#: cmdline/apt-extracttemplates.cc apt-pkg/contrib/fileutl.cc
+#, c-format
+msgid "Unable to write to %s"
+msgstr "無法寫入 %s"
+
+#: cmdline/apt-extracttemplates.cc
+msgid "Cannot get debconf version. Is debconf installed?"
+msgstr "無法取得 debconf 版本。是否有安裝 debconf？"
+
+#: cmdline/apt-internal-solver.cc
+#, fuzzy
+msgid ""
+"Usage: apt-internal-solver\n"
+"\n"
+"apt-internal-solver is an interface to use the current internal\n"
+"resolver for the APT family like an external one, for debugging or\n"
+"the like.\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#: cmdline/apt-sortpkgs.cc
+msgid "Unknown package record!"
+msgstr "未知的套件記錄！"
+
+#: cmdline/apt-sortpkgs.cc
+msgid ""
+"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
+"\n"
+"apt-sortpkgs is a simple tool to sort package information files.\n"
+"By default it sorts by binary package information, but the -s option\n"
+"can be used to switch to source package ordering instead.\n"
+msgstr ""
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Package extension list is too long"
+msgstr "套件延伸列表過長"
+
+#: ftparchive/apt-ftparchive.cc
+#, c-format
+msgid "Error processing directory %s"
+msgstr "處理目錄 %s 時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Source extension list is too long"
+msgstr "原始碼的延伸列表太長"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Error writing header to contents file"
+msgstr "寫入標頭資訊到內容檔時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc
+#, c-format
+msgid "Error processing contents %s"
+msgstr "處理內容 %s 時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc
+msgid ""
+"Usage: apt-ftparchive [options] command\n"
+"Commands: packages binarypath [overridefile [pathprefix]]\n"
+" sources srcpath [overridefile [pathprefix]]\n"
+" contents path\n"
+" release path\n"
+" generate config [groups]\n"
+" clean config\n"
+"\n"
+"apt-ftparchive generates index files for Debian archives. It supports\n"
+"many styles of generation from fully automated to functional replacements\n"
+"for dpkg-scanpackages and dpkg-scansources\n"
+"\n"
+"apt-ftparchive generates Package files from a tree of .debs. The\n"
+"Package file contains the contents of all the control fields from\n"
+"each package as well as the MD5 hash and filesize. An override file\n"
+"is supported to force the value of Priority and Section.\n"
+"\n"
+"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
+"The --source-override option can be used to specify a src override file\n"
+"\n"
+"The 'packages' and 'sources' command should be run in the root of the\n"
+"tree. BinaryPath should point to the base of the recursive search and \n"
+"override file should contain the override flags. Pathprefix is\n"
+"appended to the filename fields if present. Example usage from the \n"
+"Debian archive:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" --md5 Control MD5 generation\n"
+" -s=? Source override file\n"
+" -q Quiet\n"
+" -d=? Select the optional caching database\n"
+" --no-delink Enable delinking debug mode\n"
+" --contents Control contents file generation\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option"
+msgstr ""
+"用法：apt-ftparchive [選項] 指令\n"
+"指令：packages 二進制檔搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" sources 原始碼搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" contents 搜索路徑\n"
+" release 搜索路徑\n"
+" generate 設定檔 [群組]\n"
+" clean 設定檔\n"
+"\n"
+"apt-ftparchive 可用來替 Debian 套件庫建立索引檔。它支援了從全\n"
+"自動化到足以替代 dpkg-scanpackages 及 dpkg-scansources 所提供\n"
+"的所有功能等等各式各樣建立索引的方式。apt-ftparchive 會根據 .deb 檔案樹建立 "
+"Package 檔。Package 檔\n"
+"裡不僅包含了每個套件的 control 資料的內容，還包含了 MD5 檢驗\n"
+"碼和檔案大小。它還支援了重新定義檔，可用來強制指定優先等級及\n"
+"其所屬的類別。\n"
+"\n"
+"而同樣的，apt-ftparchive 也能根據 .dsc 檔案樹生成 Source 檔。\n"
+"可用 --source-override 選項來指定一個 src 重新定義檔。\n"
+"\n"
+"應當在檔案樹的根目錄下執行 'packages' 和 'source' 指令。\n"
+"二進制檔的搜索路徑必須指向遞迴搜索的底層，且在重新定義檔裡必\n"
+"須包含 override 旗標。若指定了路徑前綴時，則會被附加到檔案名\n"
+"稱這個欄位裡。以 Debian 套件庫為例:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"選項：\n"
+" -h 本幫助說明\n"
+" --md5 控制如何產生 MD5 檢驗碼\n"
+" -s=? 原始碼的重新定義檔\n"
+" -q 安靜模式\n"
+" -d=? 指定搭配的快取資料庫\n"
+" --no-delink 啟用 DeLinking 模式\n"
+" --contents 產生控制內容檔\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "No selections matched"
+msgstr "找不到符合的選項"
+
+#: ftparchive/apt-ftparchive.cc
+#, c-format
+msgid "Some files are missing in the package file group `%s'"
+msgstr "套件檔案組 `%s' 少了部份檔案"
+
+#: ftparchive/cachedb.cc
+#, c-format
+msgid "DB was corrupted, file renamed to %s.old"
+msgstr "DB 已損毀，檔案被更名為 %s.old"
+
+#: ftparchive/cachedb.cc
+#, c-format
+msgid "DB is old, attempting to upgrade %s"
+msgstr "DB 過舊，嘗試升級 %s"
+
+#: ftparchive/cachedb.cc
+#, fuzzy
+msgid ""
+"DB format is invalid. If you upgraded from an older version of apt, please "
+"remove and re-create the database."
+msgstr ""
+"資料庫格式不正確。如果您是由舊版的 apt 升級上來的，請移除並重新建立資料庫。"
+
+#: ftparchive/cachedb.cc
+#, c-format
+msgid "Unable to open DB file %s: %s"
+msgstr "無法開啟 DB 檔 %s: %s"
+
+#: ftparchive/cachedb.cc
+#, fuzzy
+msgid "Failed to read .dsc"
+msgstr "無法讀取連結 %s"
+
+#: ftparchive/cachedb.cc
+msgid "Archive has no control record"
+msgstr "套件檔沒有 control 記錄"
+
+#: ftparchive/cachedb.cc
+msgid "Unable to get a cursor"
+msgstr "無法取得遊標"
+
+#: ftparchive/contents.cc
+msgid "realloc - Failed to allocate memory"
+msgstr "realloc - 無法配置記憶體"
+
+#: ftparchive/multicompress.cc
+#, c-format
+msgid "Unknown compression algorithm '%s'"
+msgstr "未知的壓縮演算法 '%s'"
+
+#: ftparchive/multicompress.cc
+#, c-format
+msgid "Compressed output %s needs a compression set"
+msgstr "要壓縮輸出 %s 需搭配壓縮動作"
+
+#: ftparchive/multicompress.cc
+msgid "Failed to fork"
+msgstr "fork 時失敗"
+
+#: ftparchive/multicompress.cc
+msgid "Compress child"
+msgstr "壓縮子程序"
+
+#: ftparchive/multicompress.cc
+#, c-format
+msgid "Internal error, failed to create %s"
+msgstr "內部錯誤，無法建立 %s"
+
+#: ftparchive/multicompress.cc
+msgid "IO to subprocess/file failed"
+msgstr "和子程序/檔案 IO 失敗"
+
+#: ftparchive/multicompress.cc
+msgid "Failed to read while computing MD5"
+msgstr "在計算 MD5 時無法讀取到資料"
+
+#: ftparchive/multicompress.cc apt-inst/extract.cc
+#, c-format
+msgid "Failed to rename %s to %s"
+msgstr "無法將 %s 更名為 %s"
+
+#: ftparchive/override.cc
+#, c-format
+msgid "Unable to open %s"
+msgstr "無法開啟 %s"
+
+#. skip spaces
+#. find end of word
+#: ftparchive/override.cc
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu (%s)"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
+
+#: ftparchive/override.cc
+#, c-format
+msgid "Failed to read the override file %s"
+msgstr "無法讀取重新定義檔 %s"
+
+#: ftparchive/override.cc
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #1"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
+
+#: ftparchive/override.cc
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #2"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"
+
+#: ftparchive/override.cc
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #3"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid "W: Unable to read directory %s\n"
+msgstr "警告：無法讀取目錄 %s\n"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid "W: Unable to stat %s\n"
+msgstr "警告：無法取得 %s 狀態\n"
+
+#: ftparchive/writer.cc
+msgid "E: "
+msgstr "錯誤："
+
+#: ftparchive/writer.cc
+msgid "W: "
+msgstr "警告："
+
+#: ftparchive/writer.cc
+msgid "E: Errors apply to file "
+msgstr "錯誤：套用到檔案時發生錯誤"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid "Failed to resolve %s"
+msgstr "無法解析 %s"
+
+#: ftparchive/writer.cc
+msgid "Tree walking failed"
+msgstr "無法走訪目錄樹"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid "Failed to open %s"
+msgstr "無法開啟 %s"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " DeLink %s [%s]\n"
+msgstr " DeLink %s [%s]\n"
+
+#: ftparchive/writer.cc apt-pkg/acquire-item.cc
+#, c-format
+msgid "Failed to readlink %s"
+msgstr "無法讀取連結 %s"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid "*** Failed to link %s to %s"
+msgstr "*** 無法將 %s 連結到 %s"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " DeLink limit of %sB hit.\n"
+msgstr " 達到了 DeLink 的上限 %sB。\n"
+
+#: ftparchive/writer.cc
+msgid "Archive had no package field"
+msgstr "套件檔裡沒有套件資訊"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " %s has no override entry\n"
+msgstr " %s 沒有重新定義項目\n"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " %s maintainer is %s not %s\n"
+msgstr " %s 的維護者是 %s，而非 %s\n"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " %s has no source override entry\n"
+msgstr " %s 沒有原始碼重新定義項目\n"
+
+#: ftparchive/writer.cc
+#, c-format
+msgid " %s has no binary override entry either\n"
+msgstr " %s 也沒有二元碼重新定義項目\n"
+
+#: apt-inst/contrib/arfile.cc
+msgid "Invalid archive signature"
+msgstr "無效的套件庫簽章"
+
+#: apt-inst/contrib/arfile.cc
+msgid "Error reading archive member header"
+msgstr "讀取套件檔的成員標頭訊息時發生錯誤"
+
+#: apt-inst/contrib/arfile.cc
+#, fuzzy, c-format
+msgid "Invalid archive member header %s"
+msgstr "無效的套件檔成員標頭"
+
+#: apt-inst/contrib/arfile.cc
+msgid "Invalid archive member header"
+msgstr "無效的套件檔成員標頭"
+
+#: apt-inst/contrib/arfile.cc
+msgid "Archive is too short"
+msgstr "套件檔過短"
+
+#: apt-inst/contrib/arfile.cc
+msgid "Failed to read the archive headers"
+msgstr "讀取套件檔標頭失敗"
+
+#: apt-inst/contrib/extracttar.cc
+#, fuzzy, c-format
+msgid "Cannot find a configured compressor for '%s'"
+msgstr "無法找到套件 %s"
+
+#: apt-inst/contrib/extracttar.cc
+msgid "Corrupted archive"
+msgstr "損毀的套件檔"
+
+#: apt-inst/contrib/extracttar.cc
+msgid "Tar checksum failed, archive corrupted"
+msgstr "Tar checksum 失敗，套件檔已損毀"
+
+#: apt-inst/contrib/extracttar.cc
+#, c-format
+msgid "Unknown TAR header type %u, member %s"
+msgstr "未知的 TAR 標頭類型 %u，成員 %s"
+
+#: apt-inst/deb/debfile.cc
+#, c-format
+msgid "This is not a valid DEB archive, missing '%s' member"
+msgstr "這是個不正確的 DEB 套件檔，沒有 '%s' 成員"
+
+#: apt-inst/deb/debfile.cc
+#, c-format
+msgid "Internal error, could not locate member %s"
+msgstr "內部錯誤，找不找到成員 %s"
+
+#: apt-inst/deb/debfile.cc
+msgid "Unparsable control file"
+msgstr "無法分析的 control 檔"
+
+#: apt-inst/dirstream.cc
+#, c-format
+msgid "Failed to write file %s"
+msgstr "寫入檔案 %s 失敗"
+
+#: apt-inst/dirstream.cc
+#, c-format
+msgid "Failed to close file %s"
+msgstr "關閉檔案 %s 失敗"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "The path %s is too long"
+msgstr "路徑 %s 過長"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "Unpacking %s more than once"
+msgstr "解開 %s 超過一次"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "The directory %s is diverted"
+msgstr "路徑 %s 已被抽換"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "The package is trying to write to the diversion target %s/%s"
+msgstr "此套件試圖寫至抽換後的目標 %s/%s"
+
+#: apt-inst/extract.cc
+msgid "The diversion path is too long"
+msgstr "要進行抽換的路徑過長"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "The directory %s is being replaced by a non-directory"
+msgstr "目錄 %s 已經被非目錄的檔案所取代"
+
+#: apt-inst/extract.cc
+msgid "Failed to locate node in its hash bucket"
+msgstr "在雜湊表中找不到節點"
+
+#: apt-inst/extract.cc
+msgid "The path is too long"
+msgstr "路徑過長"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "Overwrite package match with no version for %s"
+msgstr "以無版本的 %s 覆寫原始套件"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "File %s/%s overwrites the one in the package %s"
+msgstr "檔案 %s/%s 覆寫了套件 %s 中的相同檔案"
+
+#: apt-inst/extract.cc
+#, c-format
+msgid "Unable to stat %s"
+msgstr "無法取得 %s 的狀態"
+
+#: apt-inst/filelist.cc
+msgid "DropNode called on still linked node"
+msgstr "DropNode 在還有連結結點時被呼叫"
+
+#: apt-inst/filelist.cc
+msgid "Failed to locate the hash element!"
+msgstr "找不到雜湊元件！"
+
+#: apt-inst/filelist.cc
+msgid "Failed to allocate diversion"
+msgstr "在配置抽換資訊時失敗"
+
+#: apt-inst/filelist.cc
+msgid "Internal error in AddDiversion"
+msgstr "在 AddDiversion 發生了內部錯誤"
+
+#: apt-inst/filelist.cc
+#, c-format
+msgid "Trying to overwrite a diversion, %s -> %s and %s/%s"
+msgstr "試圖改寫抽換資訊，%s -> %s 和 %s/%s"
+
+#: apt-inst/filelist.cc
+#, c-format
+msgid "Double add of diversion %s -> %s"
+msgstr "重複加入抽換資訊 %s -> %s"
+
+#: apt-inst/filelist.cc
+#, c-format
+msgid "Duplicate conf file %s/%s"
+msgstr "重複的設定檔 %s/%s"
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"Updating from such a repository can't be done securely, and is therefore "
+"disabled by default."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"Data from such a repository can't be authenticated and is therefore "
+"potentially dangerous to use."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"See apt-secure(8) manpage for repository creation and user configuration "
+"details."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc apt-pkg/contrib/fileutl.cc
+#, c-format
+msgid "rename failed, %s (%s -> %s)."
+msgstr "無法重新命名，%s (%s -> %s)。"
+
+#: apt-pkg/acquire-item.cc
+msgid "Hash Sum mismatch"
+msgstr "Hash Sum 不符"
+
+#: apt-pkg/acquire-item.cc
+msgid "Size mismatch"
+msgstr "大小不符"
+
+#: apt-pkg/acquire-item.cc
+#, fuzzy
+msgid "Invalid file format"
+msgstr "無效的操作 %s"
+
+#: apt-pkg/acquire-item.cc
+#, fuzzy
+msgid "Signature error"
+msgstr "寫入錯誤"
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"An error occurred during the signature verification. The repository is not "
+"updated and the previous index files will be used. GPG error: %s: %s"
+msgstr ""
+
+#. Invalid signature file, reject (LP: #346386) (Closes: #627642)
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid "GPG error: %s: %s"
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"Skipping acquire of configured file '%s' as repository '%s' doesn't support "
+"architecture '%s'"
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"Unable to find expected entry '%s' in Release file (Wrong sources.list entry "
+"or malformed file)"
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"Skipping acquire of configured file '%s' as repository '%s' provides only "
+"weak security information for it"
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+msgid "There is no public key available for the following key IDs:\n"
+msgstr "無法取得以下的密鑰 ID 的公鑰：\n"
+
+#. TRANSLATOR: The first %s is the URL of the bad Release file, the second is
+#. the time since then the file is invalid - formatted in the same way as in
+#. the download progress display (e.g. 7d 3h 42min 1s)
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"Release file for %s is expired (invalid since %s). Updates for this "
+"repository will not be applied."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid "Conflicting distribution: %s (expected %s but got %s)"
+msgstr "發行版本衝突：%s（應當是 %s 但卻得到 %s）"
+
+#. No Release file was present, or verification failed, so fall
+#. back to queueing Packages files without verification
+#. only allow going further if the user explicitly wants it
+#: apt-pkg/acquire-item.cc
+#, fuzzy, c-format
+msgid "The repository '%s' is not signed."
+msgstr "路徑 %s 已被抽換"
+
+#. No Release file was present so fall
+#. back to queueing Packages files without verification
+#. only allow going further if the user explicitly wants it
+#: apt-pkg/acquire-item.cc
+#, fuzzy, c-format
+msgid "The repository '%s' does not have a Release file."
+msgstr "路徑 %s 已被抽換"
+
+#: apt-pkg/acquire-item.cc
+#, fuzzy, c-format
+msgid "The repository '%s' is no longer signed."
+msgstr "路徑 %s 已被抽換"
+
+#: apt-pkg/acquire-item.cc
+msgid ""
+"This is normally not allowed, but the option Acquire::"
+"AllowDowngradeToInsecureRepositories was given to override it."
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"I wasn't able to locate a file for the %s package. This might mean you need "
+"to manually fix this package. (due to missing arch)"
+msgstr ""
+"找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。（因為找不到平"
+"台）"
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid "Can't find a source to download version '%s' of '%s'"
+msgstr ""
+
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"The package index files are corrupted. No Filename: field for package %s."
+msgstr "這個套件的索引檔損壞了。沒有套件 %s 的 Filename: 欄位。"
+
+#. TRANSLATOR: %s=%s is sourcename=sourceversion, e.g. apt=1.1
+#: apt-pkg/acquire-item.cc
+#, fuzzy, c-format
+msgid "Changelog unavailable for %s=%s"
+msgstr "正和 %s (%s) 連線"
+
+#: apt-pkg/acquire-worker.cc
+#, c-format
+msgid "The method driver %s could not be found."
+msgstr "找不到安裝方式的驅動程式 %s。"
+
+#: apt-pkg/acquire-worker.cc
+#, fuzzy, c-format
+msgid "Is the package %s installed?"
+msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
+
+#: apt-pkg/acquire-worker.cc
projects / apt.git / blobdiff