-<!doctype debiandoc system>
<!-- -*- mode: sgml; mode: fold -*- -->
+<!doctype debiandoc PUBLIC "-//DebianDoc//DTD DebianDoc//EN">
<book>
<title>APT Files</title>
<author>Jason Gunthorpe <email>jgg@debian.org</email></author>
-<version>$Id: files.sgml,v 1.1 1998/07/02 02:58:12 jgg Exp $</version>
+<version>$Id: files.sgml,v 1.12 2003/04/26 23:26:13 doogie Exp $</version>
<abstract>
This document describes the complete implementation and format of the
</abstract>
<copyright>
-Copyright © Jason Gunthorpe, 1998.
+Copyright © Jason Gunthorpe, 1998-1999.
<p>
"APT" and this document are free software; you can redistribute them and/or
modify them under the terms of the GNU General Public License as published
option) any later version.
<p>
-For more details, on Debian GNU/Linux systems, see the file
-/usr/doc/copyright/GPL for the full license.
+For more details, on Debian systems, see the file
+/usr/share/common-licenses/GPL for the full license.
</copyright>
<toc sect>
<p>
The var directory structure is as follows:
<example>
- /var/state/apt/
- lists/
+ /var/lib/apt/
+ lists/
partial/
- xstatus
+ periodic/
+ extended_states
+ cdroms.list
/var/cache/apt/
- pkgcache.bin
- srcpkgcache.bin
archives/
partial/
+ pkgcache.bin
+ srcpkgcache.bin
/etc/apt/
- sources.list
- cdromdevs.list
+ sources.list.d/
+ apt.conf.d/
+ preferences.d/
+ trusted.gpg.d/
+ sources.list
+ apt.conf
+ apt_preferences
+ trusted.gpg
/usr/lib/apt/
- methods/
- cdrom
- ftp
- http
+ methods/
+ bzip2
+ cdrom
+ copy
+ file
+ ftp
+ gpgv
+ gzip
+ http
+ https
+ lzma
+ rred
+ rsh
+ ssh
</example>
<p>
-As is specified in the FHS 2.0 /var/state/apt is used for application
+As is specified in the FHS 2.1 /var/lib/apt is used for application
data that is not expected to be user modified. /var/cache/apt is used
for regeneratable data and is where the package cache and downloaded .debs
-go.
+go. /etc/apt is the place where configuration should happen and
+/usr/lib/apt is the place where the apt and other packages can place
+binaries which can be used by the acquire system of APT.
</sect>
<!-- }}} -->
<chapt>Files
<!-- Distribution Source List {{{ -->
<!-- ===================================================================== -->
+<sect>Files and fragment directories in /etc/apt
+
+<p>
+All files in /etc/apt are used to modify specific aspects of APT. To enable
+other packages to ship needed configuration herself all these files have
+a fragment directory packages can place their files in instead of mangling
+with the main files. The main files are therefore considered to be only
+used by the user and not by a package. The documentation omits this directories
+most of the time to be easier readable, so every time the documentation includes
+a reference to a main file it really means the file or the fragment directories.
+
+</sect>
+
<sect>Distribution Source list (sources.list)
<p>
fastest source listed first. The format of each line is:
<p>
-<var>type ui args</var>
+<var>type uri args</var>
<p>
The first item, <var>type</var>, indicates the format for the remainder
of the line. It is designed to indicate the structure of the distribution
-the line is talking about. Currently the only defined value is <em>deb</em>
-which indicates a standard debian archive with a dists dir.
-
-<sect1>The deb Type
- <p>
- The <em>deb</em> type is to be a typical two level debian distributions,
- dist/<var>distribution</var>/<var>component</var>. Typically distribution
- is one of stable, unstable or frozen while component is one of main,
- contrib, non-free or non-us. The format for the deb line is as follows:
-
- <p>
- deb <var>uri</var> <var>distribution</var> <var>compontent</var>
- [<var>component</var> ...]
-
- <p>
- <var>uri</var> for the <em>deb</em> type must specify the base of the
- debian distribution. APT will automatically generate the proper longer
- URIs to get the information it needs. <var>distribution</var> can specify
- an exact path, in this case the components must be omitted and
- <var>distribution</var> must end in a slash.
-
- <p>
- Since only one distribution can be specified per deb line it may be
- necessary to list a number of deb lines for the same URI. APT will
- sort the URI list after it has generated a complete set to allow
- connection reuse. It is important to order things in the sourcelist
- from most prefered to least prefered (fastest to slowest).
-</sect1>
-
-<sect1>URI specification
-<p>
-URIs in the source list support a large number of access schemes.
-
-<taglist>
-<tag>cdrom<item>
- The cdrom scheme is special in that If Modifed Since queries are never
- performed and that APT knows how to match a cdrom to the name it
- was given when first inserted. It does this by examining the date
- and size of the package file. APT also knows all of the possible
- prefix paths for the cdrom drives and that the user should be prompted
- to insert a CD if it cannot be found. The path is relative to an
- arbitary mount point (of APT's choosing) and must not start with a
- slash. The first pathname component is the given name and is purely
- descriptive and of the users choice. However, if a file in the root of
- the cdrom is called 'cdname' its contents will be used instead of
- prompting. The name serves as a tag for the cdrom and should be unique.
- APT will track the CDROM's based on their tag and package file
- properties.
- <example>
- cdrom:Debian 1.3/debian
- </example>
-
-<tag>http<item>
- This scheme specifies a HTTP server for the debian archive. HTTP is prefered
- over FTP because If Modified Since queries against the Package file are
- possible. Newer HTTP protcols may even support reget which would make
- http the protocol of choice.
- <example>
- http://www.debian.org/archive
- </example>
-
-<tag>ftp<item>
- This scheme specifies a FTP connection to the server. FTP is limited because
- there is no support for IMS and is hard to proxy over firewalls.
- <example>
- ftp://ftp.debian.org/debian
- </example>
-
-<tag>file<item>
- The file scheme allows an arbitary directory in the file system to be
- considered as a debian archive. This is usefull for NFS mounts and
- local mirrors/archives.
- <example>
- file:/var/debian
- </example>
-
-<tag>mirror<item>
- The mirror scheme is special in that it does not specify the location of a
- debian archive but specifies the location of a list of mirrors to use
- to access the archive. Some technique will be used to determine the
- best choice for a mirror. The mirror file is specified in the Mirror File
- section. If/when URIs take off they should obsolete this field.
- <example>
- mirror:http://www.debian.org/archivemirrors
- </example>
-
-<tag>smb<item>
- A possible future expansion may be to have direct support for smb (Samba
- servers).
- <example>
- smb://ftp.kernel.org/pub/mirrors/debian
- </example>
-</taglist>
-</sect1>
+the line is talking about. Currently the only defined values are <em>deb</em>
+and <em>deb-src</em> which indicate a standard debian (source) archive with a
+dists directory. More about these types and the URI specification can be found
+in the sources.list manpage.
<sect1>Hashing the URI
<p>
-All permanent information aquired from any of the sources is stored in the
+All permanent information acquired from any of the sources is stored in the
lists directory. Thus, there must be a way to relate the filename in the
lists directory to a line in the sourcelist. To simplify things this is
-done by quoting the URI and treating ='s as quoteable characters and
-converting / to =. The URI spec says this is done by converting a
+done by quoting the URI and treating _'s as quoteable characters and
+converting / to _. The URI spec says this is done by converting a
sensitive character into %xx where xx is the hexadecimal representation
-from the ascii character set. Examples:
+from the ASCII character set. Examples:
<example>
http://www.debian.org/archive/dists/stable/binary-i386/Packages
-/var/state/apt/lists/www.debian.org=archive=dists=stable=binary-i386=Packages
+/var/lib/apt/lists/www.debian.org_archive_dists_stable_binary-i386_Packages
cdrom:Debian 1.3/debian/Packages
-/var/state/apt/info/Debian%201.3=debian=Packages
+/var/lib/apt/info/Debian%201.3_debian_Packages
</example>
<p>
structure but this poses two problems, it makes it very difficult to prune
directories back when sources are no longer used and complicates the handling
of the partial directory. This gives a very simple way to deal with all
-of the situations that can arise. The equals sign was choosen on the
-suggestion of Manoj because it is very infrequently used in filenames.
-Also note that the same rules described in the <em>Archive Directory</>
-section regarding the partial sub dir apply here as well.
+of the situations that can arise. Also note that the same rules described in
+the <em>Archive Directory</> section regarding the partial sub dir apply
+here as well.
</sect1>
</sect>
<!-- }}} -->
-<!-- Extra Status {{{ -->
+<!-- Extended Status {{{ -->
<!-- ===================================================================== -->
-<sect>Extra Status File (xstatus)
+<sect>Extended States File (extended_states)
<p>
-The extra status file serves the same purpose as the normal dpkg status file
-(/var/lib/dpkg/status) except that it stores information unique to diety.
-This includes the autoflag, target distribution and version and any other
-uniqe features that come up over time. It duplicates nothing from the normal
+The extended_states file serves the same purpose as the normal dpkg status file
+(/var/lib/dpkg/status) except that it stores information unique to apt.
+This includes currently only the autoflag but is open to store more
+unique data that come up over time. It duplicates nothing from the normal
dpkg status file. Please see other APT documentation for a discussion
-of the exact internal behavior of these fields. The Package field is
-placed directly before the new fields to indicate which package they
-apply to. The new fields are as follows:
+of the exact internal behavior of these fields. The Package and the
+Architecture field are placed directly before the new fields to indicate
+which package they apply to. The new fields are as follows:
<taglist>
-<tag>X-Auto<item>
- The Auto flag can be Yes or No and controls whether the package is in
- auto mode.
-
-<tag>X-TargetDist<item>
- The TargetDist item indicates which distribution versions are offered for
- installation from. It should be stable, unstable or frozen.
-
-<tag>X-TargetVersion<item>
- The target version item is set if the user selects a specific version, it
- overrides the TargetDist selection if both are present.
+<tag>Auto-Installed<item>
+ The Auto flag can be 1 (Yes) or 0 (No) and controls whether the package
+ was automatical installed to satisfy a dependency or if the user requested
+ the installation
</taglist>
</sect>
<!-- }}} -->
<!-- Binary Package Cache {{{ -->
<!-- ===================================================================== -->
-<sect>Binary Package Cache (pkgcache.bin)
+<sect>Binary Package Cache (srcpkgcache.bin and pkgcache.bin)
<p>
Please see cache.sgml for a complete description of what this file is. The
<p>
The archives directory is where all downloaded .deb archives go. When the
file transfer is initiated the deb is placed in partial. Once the file
-is fully downloaded and its MD5 hash and size are verifitied it is moved
+is fully downloaded and its MD5 hash and size are verified it is moved
from partial into archives/. Any files found in archives/ can be assumed
to be verified.
<p>
-No dirctory structure is transfered from the receiving site and all .deb
+No directory structure is transfered from the receiving site and all .deb
file names conform to debian conventions. No short (msdos) filename should
be placed in archives. If the need arises .debs should be unpacked, scanned
and renamed to their correct internal names. This is mostly to prevent
-file name conflicts but other programs may depend on this if convenient.
+file name conflicts but other programs may depend on this if convenient.
+A conforming .deb is one of the form, name_version_arch.deb. Our archive
+scripts do not handle epochs, but they are necessary and should be re-inserted.
+If necessary _'s and :'s in the fields should be quoted using the % convention.
+It must be possible to extract all 3 fields by examining the file name.
Downloaded .debs must be found in one of the package lists with an exact
name + version match..
</sect>
<sect> The Methods Directory (/usr/lib/apt/methods)
<p>
-Like dselect, APT will support plugable acquisition methods to complement
-its internaly supported methods. The files in
-this directory are execultables named after the URI type. APT will
-sort the required URIs and spawn these programs giving a full sorted, quoted
-list of URIs.
-
-<p>
-The interface is simple, the program will be given a list
-of URIs on the command line. The URIs will be in pairs, the first
-being the actual URI and the second being the filename to write the data to.
-The current directory will be set properly by APT and it is
-expected the method will put files relative to the current directory.
-The output of these programs is strictly speficied. The programs must accept
-nothing from stdin (stdin will be an invalid fd) and they must output
-status information to stdout according to the format below.
-Stderr will be redirected to the logging facility.
-
-<p>
-Each line sent to stdout must be a line that has a single letter and a
-space. Strings after the first letter do not need quoting, they are taken
-as is till the end of the line. The tag letters, listed in expected order,
-is as follows:
-
-<taglist>
-
-<tag>F - Change URI<item>
-This specifies a change in URI. All information after this will be applied
-to the new URI. When the URI is changed it is assumed that the old URI has
-completed unless an error is set. The format is <var>F URI</>
-
-<tag>S - Object Size<item>
-This specifies the expected size of the object. APT will use this to
-compute percent done figures. If it is not sent then a kilobyte meter
-will be used instead of a percent display. The foramat is <var>S INTEGER</>
-
-<tag>E - Error Information<item>
-Exactly one line of error information can be set for each URI. The
-information will be summarized for the user. If an E tag is send before
-any F tags then the error is assumed to be a fatal method error and all URI
-fetches for that method are aborted with that error string. The format
-is <var>E String</>
-
-<tag>I - Informative progress information<item>
-The I tag allows the method to specify the status of the connection.
-Typically the GUI will show the last recieved I line. The format is
-<var>I String</> As a general rule an I tag should be ommitted before a
-lengthy operation only. Things that always take a short period are not
-suited for I tags. I tags should change wnenever the methods state changes.
-Some standard forms, in order of occurance, are <var>Connecting to SITE</>,
-<var>Connecting to SITE (1.1.1.1)</>, <var>Waiting for file</>,
-<var>Authenticating</>, <var>Downloading</>, <var>Resuming (size)</>,
-<var>Computing MD5</> <var>I</> lines should never print out information that
-APT is already aware of, such as file names.
-
-<tag>R - Set final path<item>
-The R tag allows the method to tell APT that the file is present in the
-local file system. APT might copy it into a the download directory. The format
-is <var>R String</>
-
-<tag>M - MD5Sum of the file<item>
-The method is expected to compute the md5 hash on the fly as the download
-progresses. The final md5 of the file is to be output when the file is
-completed. If the md5 is not output it will not be checked! Some methods
-such as the file method will not check md5's because they are most
-commonly used on mirrors or local CD-ROM's, a paranoid option may be
-provided in future to force checking. The format is <var>M MD5-String</>
-
-<tag>L - Log output<item>
-This tag indicates a string that should be dumped to some log file. The
-string is for debugging and is not ment to be seen by the user. The format
-is <var>L String</> Log things should only be used in a completed method
-if they have special relavence to what is happening.
-</taglist>
-
-<p>
-APT monitors the progress of the transfer by watching the file size. This
-means the method must not create any temp files and must use a fairly small
-buffer. The method is also responsible for If-Modified-Since (IMS) queries
-for the object. It should check ../outputname to get the time stamp but not
-size. The size may be different because the file was uncompressed after
-it was transfed. A method must <em>never</> change the file in .., it may
-only change the output file in the current directory.
-
-<p>
-The APT 'http' program is the reference implementation of this specification,
-it implements all of the features a method is expected to do.
+The Methods directory is more fully described in the APT Methods interface
+document.
</sect>
<!-- }}} -->
-<!-- The Mirror List {{{ -->
+<!-- The Configuration File {{{ -->
<!-- ===================================================================== -->
-<sect> The Mirror List
+<sect> The Configuration File (/etc/apt/apt.conf)
<p>
-The mirror list is stored on the primary debian web server (www.debian.org)
-and contains a machine readable list of all known debian mirrors. The mirror
-URI type will cause this list to be downloaded and considered. It has the
-same form as the source list. When the source list specifies mirror
-as the target the mirror list is scanned to find the nescessary parts for
-the requested distributions and components. This means the user could
-have a line like:
-
-<var>deb mirror:http://www.debian.org/mirrorlist stable main non-us</var>
-
-which would likely cause APT to choose two separate sites to download from,
-one for main and another for non-us.
+The configuration file (and the associated fragments directory
+/etc/apt/apt.conf.d/) is described in the apt.conf manpage.
+</sect>
+ <!-- }}} -->
+<!-- The trusted.gpg File {{{ -->
+<!-- ===================================================================== -->
+<sect> The trusted.gpg File (/etc/apt/trusted.gpg)
<p>
-Some form of network measurement will have to be used to gauge performance
-of each of the mirrors. This will be discussed later, initial versions
-will use the first found URI.
+The trusted.gpg file (and the files in the associated fragments directory
+/etc/apt/trusted.gpg.d/) is a binary file including the keyring used
+by apt to validate that the information (e.g. the Release file) it
+downloads are really from the distributor it clams to be and is
+unmodified and is therefore the last step in the chain of trust between
+the archive and the end user. This security system is described in the
+apt-secure manpage.
</sect>
<!-- }}} -->
<!-- The Release File {{{ -->
<sect> The Release File
<p>
-This file plays and important role in how APT presents the archive to the
+This file plays an important role in how APT presents the archive to the
user. Its main purpose is to present a descriptive name for the source
of each version of each package. It also is used to detect when new versions
of debian are released. It augments the package file it is associated with
<em>unstable</>.
<tag>Component<item>
-Referes to the sub-component of the archive, <em>main</>, <em>contrib</>
-etc.
+Refers to the sub-component of the archive, <em>main</>, <em>contrib</>
+etc. Component may be omitted if there are no components for this archive.
<tag>Version<item>
This is a version string with the same properties as in the Packages file.
<example>
Archive: stable
-Compontent: main
+Component: main
Version: 1.3.1r6
Origin: Debian
Label: Debian
And unstable,
<example>
Archive: unstable
-Compontent: main
+Component: main
Version: 2.1
Origin: Debian
Label: Debian
projects / apt.git / blobdiff