merged lp:~donkult/apt/sid

[apt.git] / doc / apt_preferences.5.xml

diff --git a/doc/apt_preferences.5.xml b/doc/apt_preferences.5.xml
index c927f327a4a1d0fc080d4f2bda80a712ba88d4db..f08f92b94464a4740382d0e40e894ecd5ea2d517 100644 (file)
--- a/doc/apt_preferences.5.xml
+++ b/doc/apt_preferences.5.xml
@@ -5,6 +5,9 @@
 <!ENTITY % aptent SYSTEM "apt.ent">
 %aptent;
 
 <!ENTITY % aptent SYSTEM "apt.ent">
 %aptent;
 

+<!ENTITY % aptverbatiment SYSTEM "apt-verbatim.ent">
+%aptverbatiment;
+

 ]>
 
 <refentry>
 ]>
 
 <refentry>


@@ -66,10 +69,12 @@ You have been warned.</para>
 
 <para>Note that the files in the <filename>/etc/apt/preferences.d</filename>
 directory are parsed in alphanumeric ascending order and need to obey the
 
 <para>Note that the files in the <filename>/etc/apt/preferences.d</filename>
 directory are parsed in alphanumeric ascending order and need to obey the

-following naming convention: The files have no or "<literal>pref</literal>"
-as filename extension and which only contain alphanumeric,  hyphen (-),
-underscore (_) and period (.) characters - otherwise they will be silently
-ignored.</para>
+following naming convention: The files have either no or "<literal>pref</literal>"
+as filename extension and only contain alphanumeric, hyphen (-),
+underscore (_) and period (.) characters.
+Otherwise APT will print a notice that it has ignored a file if the file
+doesn't match a pattern in the <literal>Dir::Ignore-Files-Silently</literal>
+configuration list - in this case it will be silently ignored.</para>

 
 <refsect2><title>APT's Default Priority Assignments</title>
 
 
 <refsect2><title>APT's Default Priority Assignments</title>
 


@@ -97,9 +102,19 @@ APT::Default-Release "stable";
 algorithm to set the priorities of the versions of a package.  Assign:
 
 <variablelist>
 algorithm to set the priorities of the versions of a package.  Assign:
 
 <variablelist>

+<varlistentry>
+<term>priority 1</term>
+<listitem><simpara>to the versions coming from archives which in their <filename>Release</filename>
+files are marked as "NotAutomatic: yes" but <emphasis>not</emphasis> as "ButAutomaticUpgrades: yes"
+like the debian <literal>experimental</literal> archive.</simpara></listitem>
+</varlistentry>
+

 <varlistentry>
 <term>priority 100</term>
 <varlistentry>
 <term>priority 100</term>

-<listitem><simpara>to the version that is already installed (if any).</simpara></listitem>
+<listitem><simpara>to the version that is already installed (if any) and to the versions coming
+from archives which in their <filename>Release</filename> files are marked as "NotAutomatic: yes" and
+"ButAutomaticUpgrades: yes" like the debian backports archive since <literal>squeeze-backports</literal>.
+</simpara></listitem>

 </varlistentry>
 
 <varlistentry>
 </varlistentry>
 
 <varlistentry>


@@ -116,7 +131,10 @@ algorithm to set the priorities of the versions of a package.  Assign:
 
 <para>If the target release has not been specified then APT simply assigns
 priority 100 to all installed package versions and priority 500 to all
 
 <para>If the target release has not been specified then APT simply assigns
 priority 100 to all installed package versions and priority 500 to all

-uninstalled package versions.</para>
+uninstalled package versions, except versions coming from archives which
+in their <filename>Release</filename> files are marked as "NotAutomatic: yes" -
+these versions get the priority 1 or priority 100 if it is additionally marked
+as "ButAutomaticUpgrades: yes".</para>

 
 <para>APT then applies the following rules, listed in order of precedence,
 to determine which version of a package to install.
 
 <para>APT then applies the following rules, listed in order of precedence,
 to determine which version of a package to install.


@@ -218,11 +236,11 @@ Pin-Priority: 50
 </programlisting>
 
 <simpara>The following record assigns a high priority to all package versions
 </programlisting>
 
 <simpara>The following record assigns a high priority to all package versions

-belonging to any distribution whose Codename is "<literal>squeeze</literal>".</simpara>
+belonging to any distribution whose Codename is "<literal>&testing-codename;</literal>".</simpara>

 
 <programlisting>
 Package: *
 
 <programlisting>
 Package: *

-Pin: release n=squeeze
+Pin: release n=&testing-codename;

 Pin-Priority: 900
 </programlisting>
 
 Pin-Priority: 900
 </programlisting>
 


@@ -241,6 +259,49 @@ Pin-Priority: 500
 
 </refsect2>
 
 
 </refsect2>
 

+<refsect2><title>Regular expressions and glob() syntax</title>
+<para>
+APT also supports pinning by glob() expressions and regular
+expressions surrounded by /. For example, the following
+example assigns the priority 500 to all packages from
+experimental where the name starts with gnome (as a glob()-like
+expression) or contains the word kde (as a POSIX extended regular
+expression surrounded by slashes).
+</para>
+
+<programlisting>
+Package: gnome* /kde/
+Pin: release n=experimental
+Pin-Priority: 500
+</programlisting>
+
+<para>
+The rule for those expressions is that they can occur anywhere
+where a string can occur. Thus, the following pin assigns the
+priority 990 to all packages from a release starting with karmic.
+</para>
+
+<programlisting>
+Package: *
+Pin: release n=karmic*
+Pin-Priority: 990
+</programlisting>
+
+If a regular expression occurs in a <literal>Package</literal> field,
+the behavior is the same as if this regular expression were replaced
+with a list of all package names it matches. It is undecided whether
+this will change in the future, thus you should always list wild-card
+pins first, so later specific pins override it.
+
+The pattern "<literal>*</literal>" in a Package field is not considered
+a glob() expression in itself.
+
+</refsect2>
+
+
+
+
+

 <refsect2>
 <title>How APT Interprets Priorities</title>
 
 <refsect2>
 <title>How APT Interprets Priorities</title>
 


@@ -355,7 +416,7 @@ APT priorities:
 <para>The <filename>Release</filename> file is normally found in the directory
 <filename>.../dists/<replaceable>dist-name</replaceable></filename>:
 for example, <filename>.../dists/stable/Release</filename>,
 <para>The <filename>Release</filename> file is normally found in the directory
 <filename>.../dists/<replaceable>dist-name</replaceable></filename>:
 for example, <filename>.../dists/stable/Release</filename>,

-or <filename>.../dists/woody/Release</filename>.
+or <filename>.../dists/&stable-codename;/Release</filename>.

 It consists of a single multi-line record which applies to <emphasis>all</emphasis> of
 the packages in the directory tree below its parent.  Unlike the
 <filename>Packages</filename> file, nearly all of the lines in a <filename>Release</filename>
 It consists of a single multi-line record which applies to <emphasis>all</emphasis> of
 the packages in the directory tree below its parent.  Unlike the
 <filename>Packages</filename> file, nearly all of the lines in a <filename>Release</filename>


@@ -383,14 +444,14 @@ Pin: release a=stable
 <term>the <literal>Codename:</literal> line</term>
 <listitem><simpara>names the codename to which all the packages
 in the directory tree belong.  For example, the line
 <term>the <literal>Codename:</literal> line</term>
 <listitem><simpara>names the codename to which all the packages
 in the directory tree belong.  For example, the line

-"Codename: squeeze"
+"Codename: &testing-codename;"

 specifies that all of the packages in the directory
 tree below the parent of the <filename>Release</filename> file belong to a version named
 specifies that all of the packages in the directory
 tree below the parent of the <filename>Release</filename> file belong to a version named

-<literal>squeeze</literal>.  Specifying this value in the APT preferences file
+<literal>&testing-codename;</literal>.  Specifying this value in the APT preferences file

 would require the line:
 </simpara>
 <programlisting>
 would require the line:
 </simpara>
 <programlisting>

-Pin: release n=squeeze
+Pin: release n=&testing-codename;

 </programlisting>
 </listitem>
 </varlistentry>
 </programlisting>
 </listitem>
 </varlistentry>


@@ -476,10 +537,6 @@ distribution.</para>
 <para>Each record in the APT preferences file can optionally begin with
 one or more lines beginning with the word <literal>Explanation:</literal>.
 This provides a place for comments.</para>
 <para>Each record in the APT preferences file can optionally begin with
 one or more lines beginning with the word <literal>Explanation:</literal>.
 This provides a place for comments.</para>

-
-<para>The <literal>Pin-Priority:</literal> line in each APT preferences record is
-optional.  If omitted, APT assigns a priority of 1 less than the last value
-specified on a line beginning with <literal>Pin-Priority: release ...</literal>.</para>

 </refsect2>
 </refsect1>
 
 </refsect2>
 </refsect1>
 


@@ -594,9 +651,9 @@ the example configurations above.
 
 <programlisting>
 Explanation: Uninstall or do not install any Debian-originated package versions
 
 <programlisting>
 Explanation: Uninstall or do not install any Debian-originated package versions

-Explanation: other than those in the distribution codenamed with squeeze or sid
+Explanation: other than those in the distribution codenamed with &testing-codename; or sid

 Package: *
 Package: *

-Pin: release n=squeeze
+Pin: release n=&testing-codename;

 Pin-Priority: 900
 
 Explanation: Debian unstable is always codenamed with sid
 Pin-Priority: 900
 
 Explanation: Debian unstable is always codenamed with sid


@@ -612,7 +669,7 @@ Pin-Priority: -10
 
 <para>With a suitable &sources-list; file and the above preferences file,
 any of the following commands will cause APT to upgrade to the
 
 <para>With a suitable &sources-list; file and the above preferences file,
 any of the following commands will cause APT to upgrade to the

-latest version(s) in the release codenamed with <literal>squeeze</literal>.
+latest version(s) in the release codenamed with <literal>&testing-codename;</literal>.

 
 <programlisting>
 apt-get install <replaceable>package-name</replaceable>
 
 <programlisting>
 apt-get install <replaceable>package-name</replaceable>


@@ -624,7 +681,7 @@ apt-get dist-upgrade
 <para>The following command will cause APT to upgrade the specified
 package to the latest version from the <literal>sid</literal> distribution.
 Thereafter, <command>apt-get upgrade</command> will upgrade
 <para>The following command will cause APT to upgrade the specified
 package to the latest version from the <literal>sid</literal> distribution.
 Thereafter, <command>apt-get upgrade</command> will upgrade

-the package to the most recent <literal>squeeze</literal> version if that is
+the package to the most recent <literal>&testing-codename;</literal> version if that is

 more recent than the installed version, otherwise, to the most recent
 <literal>sid</literal> version if that is more recent than the installed
 version.
 more recent than the installed version, otherwise, to the most recent
 <literal>sid</literal> version if that is more recent than the installed
 version.