-"Queuing mode; <literal>Queue-Mode</literal> can be one of "
-"<literal>host</literal> or <literal>access</literal> which determines how "
-"APT parallelizes outgoing connections. <literal>host</literal> means that "
-"one connection per target host will be opened, <literal>access</literal> "
-"means that one connection per URI type will be opened."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:311
-msgid "Retries"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:312
-msgid ""
-"Number of retries to perform. If this is non-zero APT will retry failed "
-"files the given number of times."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:316
-msgid "Source-Symlinks"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:317
-msgid ""
-"Use symlinks for source archives. If set to true then source archives will "
-"be symlinked when possible instead of copying. True is the default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:321 sources.list.5.xml:160
-msgid "http"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:322
-msgid ""
-"HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
-"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per "
-"host proxies can also be specified by using the form "
-"<literal>http::Proxy::<host></literal> with the special keyword "
-"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
-"settings is specified, <envar>http_proxy</envar> environment variable will "
-"be used."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:330
-msgid ""
-"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
-"caches. <literal>No-Cache</literal> tells the proxy to not use its cached "
-"response under any circumstances, <literal>Max-Age</literal> is sent only "
-"for index files and tells the cache to refresh its object if it is older "
-"than the given number of seconds. Debian updates its index files daily so "
-"the default is 1 day. <literal>No-Store</literal> specifies that the cache "
-"should never store this request, it is only set for archive files. This may "
-"be useful to prevent polluting a proxy cache with very large .deb "
-"files. Note: Squid 2.0.2 does not support any of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:340 apt.conf.5.xml:404
-msgid ""
-"The option <literal>timeout</literal> sets the timeout timer used by the "
-"method, this applies to all things including connection timeout and data "
-"timeout."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:343
-msgid ""
-"One setting is provided to control the pipeline depth in cases where the "
-"remote server is not RFC conforming or buggy (such as Squid 2.0.2). "
-"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 "
-"indicating how many outstanding requests APT should send. A value of zero "
-"MUST be specified if the remote host does not properly linger on TCP "
-"connections - otherwise data corruption will occur. Hosts which require this "
-"are in violation of RFC 2068."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:351
-msgid ""
-"The used bandwidth can be limited with "
-"<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in "
-"kilobyte. The default value is 0 which deactivates the limit and tries uses "
-"as much as possible of the bandwidth (Note that this option implicit "
-"deactivates the download from multiple servers at the same time.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:356
-msgid ""
-"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
-"User-Agent for the http download method as some proxies allow access for "
-"clients only if the client uses a known identifier."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:362
-msgid "https"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:363
-msgid ""
-"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
-"options are the same as for <literal>http</literal> method and will also "
-"default to the options from the <literal>http</literal> method if they are "
-"not explicitly set for https. <literal>Pipeline-Depth</literal> option is "
-"not supported yet."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:369
-msgid ""
-"<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates. <literal><host>::CaInfo</literal> is "
-"corresponding per-host option. <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not. <literal><host>::Verify-Peer</literal> "
-"is corresponding per-host option. <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not. "
-"<literal><host>::Verify-Host</literal> is corresponding per-host "
-"option. <literal>SslCert</literal> determines what certificate to use for "
-"client authentication. <literal><host>::SslCert</literal> is "
-"corresponding per-host option. <literal>SslKey</literal> determines what "
-"private key to use for client "
-"authentication. <literal><host>::SslKey</literal> is corresponding "
-"per-host option. <literal>SslForceVersion</literal> overrides default SSL "
-"version to use. Can contain 'TLSv1' or 'SSLv3' string. "
-"<literal><host>::SslForceVersion</literal> is corresponding per-host "
-"option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:387 sources.list.5.xml:171
-msgid "ftp"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:388
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form "
-"<literal>ftp::Proxy::<host></literal> with the special keyword "
-"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
-"settings is specified, <envar>ftp_proxy</envar> environment variable will be "
-"used. To use a ftp proxy you will have to set the "
-"<literal>ftp::ProxyLogin</literal> script in the configuration file. This "
-"entry specifies the commands to send to tell the proxy server what to "
-"connect to. Please see &configureindex; for an example of how to do "
-"this. The substitution variables available are "
-"<literal>$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> "
-"<literal>$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> "
-"<literal>$(SITE)</literal> and <literal>$(SITE_PORT)</literal> Each is taken "
-"from it's respective URI component."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:407
-msgid ""
-"Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment. However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:414
-msgid ""
-"It is possible to proxy FTP over HTTP by setting the "
-"<envar>ftp_proxy</envar> environment variable to a http url - see the "
-"discussion of the http method above for syntax. You cannot set this in the "
-"configuration file and it is not recommended to use FTP over HTTP due to its "
-"low efficiency."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:419
-msgid ""
-"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
-"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
-"false, which means these commands are only used if the control connection is "
-"IPv6. Setting this to true forces their use even on IPv4 connections. Note "
-"that most FTP servers do not support RFC2428."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:426 sources.list.5.xml:153
-msgid "cdrom"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:432
-#, no-wrap
-msgid "/cdrom/::Mount \"foo\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:427
-msgid ""
-"CDROM URIs; the only setting for CDROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
-"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:437
-msgid "gpgv"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:438
-msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:443
-msgid "CompressionTypes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:449
-#, no-wrap
-msgid ""
-"Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> "
-"\"<replaceable>Methodname</replaceable>\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:444
-msgid ""
-"List of compression types which are understood by the acquire methods. "
-"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and "
-"<command>gzip</command> compressed files, with this setting more formats can "
-"be added on the fly or the used method can be changed. The syntax for this "
-"is: <placeholder type=\"synopsis\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:454
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order:: \"gz\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:457
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:450
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
-"order the acquire system will try to download the compressed files. The "
-"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" "
-"id=\"0\"/> can be used to prefer <command>gzip</command> compressed files "
-"over <command>bzip2</command> and <command>lzma</command>. If "
-"<command>lzma</command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:461
-#, no-wrap
-msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:459
-msgid ""
-"Note that at run time the "
-"<literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> will be "
-"checked: If this setting exists the method will only be used if this file "
-"exists, e.g. for the bzip2 method (the inbuilt) setting is: <placeholder "
-"type=\"literallayout\" id=\"0\"/> Note also that list entries specified on "
-"the command line will be added at the end of the list specified in the "
-"configuration files, but before the default entries. To prefer a type in "
-"this case over the ones specified in the configuration files you can set the "
-"option direct - not in list style. This will not override the defined list, "
-"it will only prefix the list with this type."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:466
-msgid ""
-"The special type <literal>uncompressed</literal> can be used to give "
-"uncompressed files a preference, but note that most archives don't provide "
-"uncompressed files so this is mostly only useable for local mirrors."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:471
-msgid "GzipIndexes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:473
-msgid ""
-"When downloading <literal>gzip</literal> compressed indexes (Packages, "
-"Sources, or Translations), keep them gzip compressed locally instead of "
-"unpacking them. This saves quite a lot of disk space at the expense of more "
-"CPU requirements when building the local package caches. False by default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:480
-msgid "Languages"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:481
-msgid ""
-"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the "
-"Description-Translations. APT will try to display the first available "
-"Description in the Language which is listed at first. Languages can be "
-"defined with their short or long Languagecodes. Note that not all archives "
-"provide <filename>Translation</filename> files for every Language - "
-"especially the long Languagecodes are rare, so please inform you which ones "
-"are available before you set here impossible values."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:497
-#, no-wrap
-msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:487
-msgid ""
-"The default list includes \"environment\" and "
-"\"en\". \"<literal>environment</literal>\" has a special meaning here: It "
-"will be replaced at runtime with the languagecodes extracted from the "
-"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
-"that these codes are not included twice in the list. If "
-"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
-"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting "
-"<literal>Acquire::Languages=none</literal>. \"<literal>none</literal>\" is "
-"another special meaning code which will stop the search for a fitting "
-"<filename>Translation</filename> file. This can be used by the system "
-"administrator to let APT know that it should download also this files "
-"without actually use them if the environment doesn't specify this "
-"languages. So the following example configuration will result in the order "
-"\"en, de\" in an english and in \"de, en\" in a german localization. Note "
-"that \"fr\" is downloaded, but not used if APT is not used in a french "
-"localization, in such an environment the order would be \"fr, de, en\". "
-"<placeholder type=\"programlisting\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:253
-msgid ""
-"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers. <placeholder type=\"variablelist\" "
-"id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:504
-msgid "Directories"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:506
-msgid ""
-"The <literal>Dir::State</literal> section has directories that pertain to "
-"local state information. <literal>lists</literal> is the directory to place "
-"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
-"preferences file. <literal>Dir::State</literal> contains the default "
-"directory to prefix on all sub items if they do not start with "
-"<filename>/</filename> or <filename>./</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:513
-msgid ""
-"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
-"information, such as the two package caches <literal>srcpkgcache</literal> "
-"and <literal>pkgcache</literal> as well as the location to place downloaded "
-"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
-"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
-"default directory is contained in <literal>Dir::Cache</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:522
-msgid ""
-"<literal>Dir::Etc</literal> contains the location of configuration files, "
-"<literal>sourcelist</literal> gives the location of the sourcelist and "
-"<literal>main</literal> is the default configuration file (setting has no "
-"effect, unless it is done from the config file specified by "
-"<envar>APT_CONFIG</envar>)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:528
-msgid ""
-"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
-"in lexical order from the directory specified. After this is done then the "
-"main config file is loaded."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:532
-msgid ""
-"Binary programs are pointed to by "
-"<literal>Dir::Bin</literal>. <literal>Dir::Bin::Methods</literal> specifies "
-"the location of the method handlers and <literal>gzip</literal>, "
-"<literal>bzip2</literal>, <literal>lzma</literal>, <literal>dpkg</literal>, "
-"<literal>apt-get</literal> <literal>dpkg-source</literal> "
-"<literal>dpkg-buildpackage</literal> and <literal>apt-cache</literal> "
-"specify the location of the respective programs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:540
-msgid ""
-"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and "
-"<literal>Dir::State::status</literal> is set to "
-"<filename>/var/lib/dpkg/status</filename>, then the status file will be "
-"looked up in <filename>/tmp/staging/var/lib/dpkg/status</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:553
-msgid ""
-"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
-"which files APT should silently ignore while parsing the files in the "
-"fragment directories. Per default a file which end with "
-"<literal>.disabled</literal>, <literal>~</literal>, <literal>.bak</literal> "
-"or <literal>.dpkg-[a-z]+</literal> is silently ignored. As seen in the last "
-"default value these patterns can use regular expression syntax."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:562
-msgid "APT in DSelect"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:564
-msgid ""
-"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
-"section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:568
-msgid "Clean"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:569
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:578
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:582
-msgid "Updateoptions"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:583
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:587
-msgid "PromptAfterUpdate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:588
-msgid ""
-"If true the [U]pdate operation in &dselect; will always prompt to continue. "
-"The default is to prompt only on error."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:594
-msgid "How APT calls dpkg"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:595
-msgid ""
-"Several configuration directives control how APT invokes &dpkg;. These are "
-"in the <literal>DPkg</literal> section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:600
-msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
-"using the list notation and each list item is passed as a single argument to "
-"&dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:605
-msgid "Pre-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:605
-msgid "Post-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:606
-msgid ""
-"This is a list of shell commands to run before/after invoking &dpkg;. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:612
-msgid "Pre-Install-Pkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:613
-msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:619
-msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting "
-"<literal>DPkg::Tools::options::cmd::Version</literal> to "
-"2. <literal>cmd</literal> is a command given to "
-"<literal>Pre-Install-Pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:626
-msgid "Run-Directory"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:627
-msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is "
-"<filename>/</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:631
-msgid "Build-options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:632
-msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
-"default is to disable signing and produce all binaries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:637
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:638
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiple calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing. <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:653
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:647
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:659
-msgid "DPkg::NoTriggers"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:660
-msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call. Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:667
-msgid "PackageManager::Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:668
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit. The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next "
-"option. \"<literal>no</literal>\" on the other hand will not configure "
-"anything and totally rely on dpkg for configuration (which will at the "
-"moment fail if a Pre-Depends is encountered). Setting this option to "
-"another than the all value will implicitly activate also the next option per "
-"default as otherwise the system could end in an unconfigured status which "
-"could be unbootable!"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:678
-msgid "DPkg::ConfigurePending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:679
-msgid ""
-"If this option is set apt will call <command>dpkg --configure "
-"--pending</command> to let dpkg handle all required configurations and "
-"triggers. This option is activated automatic per default if the previous "
-"option is not set to <literal>all</literal>, but deactivating could be "
-"useful if you want to run APT multiple times in a row - e.g. in an "
-"installer. In these sceneries you could deactivate this option in all but "
-"the last run."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:685
-msgid "DPkg::TriggersPending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:686
-msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:691
-msgid "PackageManager::UnpackAll"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:692
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by "
-"Pre-Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:699
-msgid "OrderList::Score::Immediate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:707
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:700
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated). These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"default values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:720
-msgid "Periodic and Archives options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:721
-msgid ""
-"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:729
-msgid "Debug options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:731
-msgid ""
-"Enabling options in the <literal>Debug::</literal> section will cause "
-"debugging information to be sent to the standard error stream of the program "
-"utilizing the <literal>apt</literal> libraries, or enable special program "
-"modes that are primarily useful for debugging the behavior of "
-"<literal>apt</literal>. Most of these options are not interesting to a "
-"normal user, but a few may be:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:742
-msgid ""
-"<literal>Debug::pkgProblemResolver</literal> enables output about the "
-"decisions made by <literal>dist-upgrade, upgrade, install, remove, "
-"purge</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:750
-msgid ""
-"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
-"used to run some operations (for instance, <literal>apt-get -s "
-"install</literal>) as a non-root user."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:759
-msgid ""
-"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
-"time that <literal>apt</literal> invokes &dpkg;."
-msgstr ""
-
-#. TODO: provide a
-#. motivating example, except I haven't a clue why you'd want
-#. to do this.
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:767
-msgid ""
-"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
-"in CDROM IDs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:777
-msgid "A full list of debugging options to apt follows."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:782
-msgid "<literal>Debug::Acquire::cdrom</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:786
-msgid "Print information related to accessing <literal>cdrom://</literal> sources."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:793
-msgid "<literal>Debug::Acquire::ftp</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:797
-msgid "Print information related to downloading packages using FTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:804
-msgid "<literal>Debug::Acquire::http</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:808
-msgid "Print information related to downloading packages using HTTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:815
-msgid "<literal>Debug::Acquire::https</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:819
-msgid "Print information related to downloading packages using HTTPS."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:826
-msgid "<literal>Debug::Acquire::gpgv</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:830
-msgid ""
-"Print information related to verifying cryptographic signatures using "
-"<literal>gpg</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:837
-msgid "<literal>Debug::aptcdrom</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:841
-msgid ""
-"Output information about the process of accessing collections of packages "
-"stored on CD-ROMs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:848
-msgid "<literal>Debug::BuildDeps</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:851
-msgid "Describes the process of resolving build-dependencies in &apt-get;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:858
-msgid "<literal>Debug::Hashes</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:861
-msgid ""
-"Output each cryptographic hash that is generated by the "
-"<literal>apt</literal> libraries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:868
-msgid "<literal>Debug::IdentCDROM</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:871
-msgid ""
-"Do not include information from <literal>statfs</literal>, namely the number "
-"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
-"a CD-ROM."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:879
-msgid "<literal>Debug::NoLocking</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:882
-msgid ""
-"Disable all file locking. For instance, this will allow two instances of "
-"<quote><literal>apt-get update</literal></quote> to run at the same time."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:890
-msgid "<literal>Debug::pkgAcquire</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:894
-msgid "Log when items are added to or removed from the global download queue."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:901
-msgid "<literal>Debug::pkgAcquire::Auth</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:904
-msgid ""
-"Output status messages and errors related to verifying checksums and "
-"cryptographic signatures of downloaded files."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:911
-msgid "<literal>Debug::pkgAcquire::Diffs</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:914
-msgid ""
-"Output information about downloading and applying package index list diffs, "
-"and errors relating to package index list diffs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:922
-msgid "<literal>Debug::pkgAcquire::RRed</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:926
-msgid ""
-"Output information related to patching apt package lists when downloading "
-"index diffs instead of full indices."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:933
-msgid "<literal>Debug::pkgAcquire::Worker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:937
-msgid "Log all interactions with the sub-processes that actually perform downloads."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:944
-msgid "<literal>Debug::pkgAutoRemove</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:948
-msgid ""
-"Log events related to the automatically-installed status of packages and to "
-"the removal of unused packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:955
-msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:958
-msgid ""
-"Generate debug messages describing which packages are being automatically "
-"installed to resolve dependencies. This corresponds to the initial "
-"auto-install pass performed in, e.g., <literal>apt-get install</literal>, "
-"and not to the full <literal>apt</literal> dependency resolver; see "
-"<literal>Debug::pkgProblemResolver</literal> for that."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:969
-msgid "<literal>Debug::pkgDepCache::Marker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:972
-msgid ""
-"Generate debug messages describing which package is marked as "
-"keep/install/remove while the ProblemResolver does his work. Each addition "
-"or deletion may trigger additional actions; they are shown indented two "
-"additional space under the original entry. The format for each line is "
-"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or "
-"<literal>MarkInstall</literal> followed by <literal>package-name <a.b.c "
-"-> d.e.f | x.y.z> (section)</literal> where <literal>a.b.c</literal> "
-"is the current version of the package, <literal>d.e.f</literal> is the "
-"version considered for installation and <literal>x.y.z</literal> is a newer "
-"version, but not considered for installation (because of a low pin "
-"score). The later two can be omitted if there is none or if it is the same "
-"version as the installed. <literal>section</literal> is the name of the "
-"section the package appears in."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:991
-msgid "<literal>Debug::pkgInitConfig</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:994
-msgid "Dump the default configuration to standard error on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1001
-msgid "<literal>Debug::pkgDPkgPM</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1004
-msgid ""
-"When invoking &dpkg;, output the precise command line with which it is being "
-"invoked, with arguments separated by a single space character."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1012
-msgid "<literal>Debug::pkgDPkgProgressReporting</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1015
-msgid ""
-"Output all the data received from &dpkg; on the status file descriptor and "
-"any errors encountered while parsing it."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1022
-msgid "<literal>Debug::pkgOrderList</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1026
-msgid ""
-"Generate a trace of the algorithm that decides the order in which "
-"<literal>apt</literal> should pass packages to &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1034
-msgid "<literal>Debug::pkgPackageManager</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1038
-msgid "Output status messages tracing the steps performed when invoking &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1045
-msgid "<literal>Debug::pkgPolicy</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1049
-msgid "Output the priority of each package list on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1055
-msgid "<literal>Debug::pkgProblemResolver</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1059
-msgid ""
-"Trace the execution of the dependency resolver (this applies only to what "
-"happens when a complex dependency problem is encountered)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1067
-msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1070
-msgid ""
-"Display a list of all installed packages with their calculated score used by "
-"the pkgProblemResolver. The description of the package is the same as "
-"described in <literal>Debug::pkgDepCache::Marker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1078
-msgid "<literal>Debug::sourceList</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1082
-msgid ""
-"Print information about the vendors read from "
-"<filename>/etc/apt/vendors.list</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1105
-msgid ""
-"&configureindex; is a configuration file showing example values for all "
-"possible options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist>
-#: apt.conf.5.xml:1112
-msgid "&file-aptconf;"
-msgstr ""
-
-#. ? reading apt.conf
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1117
-msgid "&apt-cache;, &apt-config;, &apt-preferences;."
-msgstr ""
-
-#. The last update date
-#. type: Content of: <refentry><refentryinfo>
-#: apt_preferences.5.xml:16
-msgid "&apt-author.team; &apt-email; &apt-product; <date>16 February 2010</date>"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt_preferences.5.xml:24 apt_preferences.5.xml:31
-msgid "apt_preferences"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt_preferences.5.xml:32
-msgid "Preference control file for APT"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:37
-msgid ""
-"The APT preferences file <filename>/etc/apt/preferences</filename> and the "
-"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder "
-"can be used to control which versions of packages will be selected for "
-"installation."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:42
-msgid ""
-"Several versions of a package may be available for installation when the "
-"&sources-list; file contains references to more than one distribution (for "
-"example, <literal>stable</literal> and <literal>testing</literal>). APT "
-"assigns a priority to each version that is available. Subject to dependency "
-"constraints, <command>apt-get</command> selects the version with the highest "
-"priority for installation. The APT preferences file overrides the "
-"priorities that APT assigns to package versions by default, thus giving the "
-"user control over which one is selected for installation."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:52
-msgid ""
-"Several instances of the same version of a package may be available when the "
-"&sources-list; file contains references to more than one source. In this "
-"case <command>apt-get</command> downloads the instance listed earliest in "
-"the &sources-list; file. The APT preferences file does not affect the "
-"choice of instance, only the choice of version."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:59
-msgid ""
-"Preferences are a strong power in the hands of a system administrator but "
-"they can become also their biggest nightmare if used without care! APT will "
-"not questioning the preferences so wrong settings will therefore lead to "
-"uninstallable packages or wrong decisions while upgrading packages. Even "
-"more problems will arise if multiply distribution releases are mixed without "
-"a good understanding of the following paragraphs. Packages included in a "
-"specific release aren't tested in and therefore doesn't always work as "
-"expected in older or newer releases or together with other packages from "
-"different releases. You have been warned."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:70
-msgid ""
-"Note that the files in the <filename>/etc/apt/preferences.d</filename> "
-"directory are parsed in alphanumeric ascending order and need to obey the "
-"following naming convention: The files have either no or "
-"\"<literal>pref</literal>\" as filename extension and only contain "
-"alphanumeric, hyphen (-), underscore (_) and period (.) characters. "
-"Otherwise APT will print a notice that it has ignored a file if the file "
-"doesn't match a pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
-"configuration list - in this case it will be silently ignored."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:79
-msgid "APT's Default Priority Assignments"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:94
-#, no-wrap
-msgid ""
-"<command>apt-get install -t testing "
-"<replaceable>some-package</replaceable></command>\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:97
-#, no-wrap
-msgid "APT::Default-Release \"stable\";\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:81
-msgid ""
-"If there is no preferences file or if there is no entry in the file that "
-"applies to a particular version then the priority assigned to that version "
-"is the priority of the distribution to which that version belongs. It is "
-"possible to single out a distribution, \"the target release\", which "
-"receives a higher priority than other distributions do by default. The "
-"target release can be set on the <command>apt-get</command> command line or "
-"in the APT configuration file <filename>/etc/apt/apt.conf</filename>. Note "
-"that this has precedence over any general priority you set in the "
-"<filename>/etc/apt/preferences</filename> file described later, but not over "
-"specifically pinned packages. For example, <placeholder "
-"type=\"programlisting\" id=\"0\"/> <placeholder type=\"programlisting\" "
-"id=\"1\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:106
-msgid "priority 1"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:107
-msgid ""
-"to the versions coming from archives which in their "
-"<filename>Release</filename> files are marked as \"NotAutomatic: yes\" but "
-"<emphasis>not</emphasis> as \"ButAutomaticUpgrades: yes\" like the debian "
-"<literal>experimental</literal> archive."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:113
-msgid "priority 100"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:114
-msgid ""
-"to the version that is already installed (if any) and to the versions coming "
-"from archives which in their <filename>Release</filename> files are marked "
-"as \"NotAutomatic: yes\" and \"ButAutomaticUpgrades: yes\" like the debian "
-"backports archive since <literal>squeeze-backports</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:121
-msgid "priority 500"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:122
-msgid ""
-"to the versions that are not installed and do not belong to the target "
-"release."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:126
-msgid "priority 990"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:127
-msgid "to the versions that are not installed and belong to the target release."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:101
-msgid ""
-"If the target release has been specified then APT uses the following "
-"algorithm to set the priorities of the versions of a package. Assign: "
-"<placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:132
-msgid ""
-"If the target release has not been specified then APT simply assigns "
-"priority 100 to all installed package versions and priority 500 to all "
-"uninstalled package versions, except versions coming from archives which in "
-"their <filename>Release</filename> files are marked as \"NotAutomatic: yes\" "
-"- these versions get the priority 1 or priority 100 if it is additionally "
-"marked as \"ButAutomaticUpgrades: yes\"."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:139
-msgid ""
-"APT then applies the following rules, listed in order of precedence, to "
-"determine which version of a package to install."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:142
-msgid ""
-"Never downgrade unless the priority of an available version exceeds 1000. "
-"(\"Downgrading\" is installing a less recent version of a package in place "
-"of a more recent version. Note that none of APT's default priorities "
-"exceeds 1000; such high priorities can only be set in the preferences file. "
-"Note also that downgrading a package can be risky.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:148
-msgid "Install the highest priority version."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:149
-msgid ""
-"If two or more versions have the same priority, install the most recent one "
-"(that is, the one with the higher version number)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:152
-msgid ""
-"If two or more versions have the same priority and version number but either "
-"the packages differ in some of their metadata or the "
-"<literal>--reinstall</literal> option is given, install the uninstalled one."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:158
-msgid ""
-"In a typical situation, the installed version of a package (priority 100) "
-"is not as recent as one of the versions available from the sources listed in "
-"the &sources-list; file (priority 500 or 990). Then the package will be "
-"upgraded when <command>apt-get install "
-"<replaceable>some-package</replaceable></command> or <command>apt-get "
-"upgrade</command> is executed."