+"Pin: release a=testing\n"
+"Pin-Priority: 900\n"
+"\n"
+"Package: *\n"
+"Pin: release a=unstable\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+# type: Content of: <refentry><refsect1><refsect2><para>
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:592
+msgid ""
+"The following APT preferences file will cause APT to assign a high priority "
+"to package versions from the <literal>testing</literal> distribution, a "
+"lower priority to package versions from the <literal>unstable</literal> "
+"distribution, and a prohibitively low priority to package versions from "
+"other <literal>Debian</literal> distributions. <placeholder type="
+"\"programlisting\" id=\"0\"/>"
+msgstr ""
+"以下の APT 選択ファイルは、<literal>testing</literal> ディストリビューション"
+"のパッケージのバージョンに高い優先度を割り当て、<literal>unstable</literal> "
+"ディストリビューションのパッケージのバージョンには低い優先度を割り当てます。"
+"また他の <literal>Debian</literal> ディストリビューションのパッケージのバー"
+"ジョンには、低くてインストールできないような優先度を割り当てます。"
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+
+# type: Content of: <refentry><refsect1><refsect2><para>
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:613
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest "
+"<literal>testing</literal> version(s). <placeholder type=\"programlisting\" "
+"id=\"0\"/>"
+msgstr ""
+"適切な &sources-list; ファイルと上記の選択ファイルにより、以下のコマンドで最"
+"新の <literal>testing</literal> バージョンにアップグレードできます。"
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+
+# type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml:633
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/unstable\n"
+msgstr "apt-get install <replaceable>package</replaceable>/unstable\n"
+
+# type: Content of: <refentry><refsect1><refsect2><para>
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:624
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>unstable</literal> distribution. "
+"Thereafter, <command>apt-get upgrade</command> will upgrade the package to "
+"the most recent <literal>testing</literal> version if that is more recent "
+"than the installed version, otherwise, to the most recent <literal>unstable</"
+"literal> version if that is more recent than the installed version. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"以下のコマンドで、指定したパッケージを <literal>unstable</literal> ディストリ"
+"ビューションの最新バージョンにアップグレードします。それ以降、<command>apt-"
+"get upgrade</command> は <literal>testing</literal> バージョンのパッケージが"
+"更新されていれば <literal>testing</literal> の最新版に、<literal>unstable</"
+"literal> バージョンのパッケージが更新されていれば <literal>unstable</"
+"literal> の最新版にアップグレードします。<placeholder type=\"programlisting"
+"\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt_preferences.5.xml:640
+msgid "Tracking the evolution of a codename release"
+msgstr "コード名リリースの進化の追跡"
+
+# type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml:654
+#, no-wrap
+msgid ""
+"Explanation: Uninstall or do not install any Debian-originated package versions\n"
+"Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n"
+"Package: *\n"
+"Pin: release n=&testing-codename;\n"
+"Pin-Priority: 900\n"
+"\n"
+"Explanation: Debian unstable is always codenamed with sid\n"
+"Package: *\n"
+"Pin: release n=sid\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+msgstr ""
+"Explanation: Uninstall or do not install any Debian-originated package versions\n"
+"Explanation: other than those in the distribution codenamed with &testing-codename; or sid\n"
+"Package: *\n"
+"Pin: release n=&testing-codename;\n"
+"Pin-Priority: 900\n"
+"\n"
+"Explanation: Debian unstable is always codenamed with sid\n"
+"Package: *\n"
+"Pin: release n=sid\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:642
+msgid ""
+"The following APT preferences file will cause APT to assign a priority "
+"higher than the default (500) to all package versions belonging to a "
+"specified codename of a distribution and a prohibitively low priority to "
+"package versions belonging to other <literal>Debian</literal> distributions, "
+"codenames and archives. Note that with this APT preference APT will follow "
+"the migration of a release from the archive <literal>testing</literal> to "
+"<literal>stable</literal> and later <literal>oldstable</literal>. If you "
+"want to follow for example the progress in <literal>testing</literal> "
+"notwithstanding the codename changes you should use the example "
+"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"以下の APT 選択ファイルは、指定したコードネームのディストリビューションに属す"
+"る全てのパッケージのバージョンに、デフォルト (500) より高い優先度を割り当て、"
+"他の <literal>Debian</literal> ディストリビューション、コード名、アーカイブの"
+"パッケージのバージョンには、低くてインストールできないような優先度を割り当て"
+"ます。この APT 選択ファイルにより、APT は <literal>testing</literal> アーカイ"
+"ブから、<literal>stable</literal> や最新の <literal>oldstable</literal> へ移"
+"行できます。コード名の変更に関係なく <literal>testing</literal> を追跡したい"
+"場合は、上記の設定例を使用するべきです。<placeholder type=\"programlisting\" "
+"id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:671
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest version(s) in "
+"the release codenamed with <literal>&testing-codename;</literal>. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"適切な &sources-list; ファイルと上記の選択ファイルにより、以下のコマンドで、"
+"リリースコード名が <literal>&testing-codename;</literal> である最新バージョン"
+"にアップグレードできます。<placeholder type=\"programlisting\" id=\"0\"/>"
+
+# type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml:691
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/sid\n"
+msgstr "apt-get install <replaceable>package</replaceable>/sid\n"
+
+# type: Content of: <refentry><refsect1><refsect2><para>
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml:682
+#, fuzzy
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>sid</literal> distribution. Thereafter, "
+"<command>apt-get upgrade</command> will upgrade the package to the most "
+"recent <literal>&testing-codename;</literal> version if that is more recent "
+"than the installed version, otherwise, to the most recent <literal>sid</"
+"literal> version if that is more recent than the installed version. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"以下のコマンドで、指定したパッケージを <literal>sid</literal> ディストリ"
+"ビューションの最新バージョンにアップグレードします。それ以降、<command>apt-"
+"get upgrade</command> は <literal>squeeze</literal> バージョンのパッケージが"
+"更新されていれば <literal>squeeze</literal> の最新版に、<literal>sid</"
+"literal> バージョンのパッケージが更新されていれば <literal>sid</literal>の最"
+"新版にアップグレードします。<placeholder type=\"programlisting\" id=\"0\"/>"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: apt_preferences.5.xml:706
+msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: sources.list.5.xml:33
+msgid "List of configured APT data sources"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:38
+msgid ""
+"The source list <filename>/etc/apt/sources.list</filename> is designed to "
+"support any number of active sources and a variety of source media. The file "
+"lists one source per line, with the most preferred source listed first. The "
+"information available from the configured sources is acquired by "
+"<command>apt-get update</command> (or by an equivalent command from another "
+"APT front-end)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:45
+msgid ""
+"Each line specifying a source starts with type (e.g. <literal>deb-src</"
+"literal>) followed by options and arguments for this type. Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment."
+msgstr ""
+
+# type: Content of: <refentry><refsect1><title>
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml:53
+msgid "sources.list.d"
+msgstr "sources.list.d"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:54
+#, fuzzy
+#| msgid ""
+#| "The <filename>/etc/apt/sources.list.d</filename> directory provides a way "
+#| "to add sources.list entries in separate files. The format is the same as "
+#| "for the regular <filename>sources.list</filename> file. File names need "
+#| "to end with <filename>.list</filename> and may only contain letters (a-z "
+#| "and A-Z), digits (0-9), underscore (_), hyphen (-) and period (.) "
+#| "characters. Otherwise they will be silently ignored."
+msgid ""
+"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
+"add sources.list entries in separate files. The format is the same as for "
+"the regular <filename>sources.list</filename> file. File names need to end "
+"with <filename>.list</filename> and may only contain letters (a-z and A-Z), "
+"digits (0-9), underscore (_), hyphen (-) and period (.) characters. "
+"Otherwise APT will print a notice that it has ignored a file, unless that "
+"file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
+"configuration list - in which case it will be silently ignored."
+msgstr ""
+"<filename>/etc/apt/sources.list.d</filename> ディレクトリは、個別ファイルで追"
+"加 source.list エントリを提供します。フォーマットは、通常の "
+"<filename>sources.list</filename> ファイルと同じです。ファイル名は、"
+"<filename>.list</filename> で終わる必要があり、文字 (a-z と A-Z)、数字 "
+"(0-9)、アンダースコア (_)、ハイフン (-)、ピリオド (.) のみを含んでいなければ"
+"なりません。そうでなければ、黙って無視します。"
+
+# type: Content of: <refentry><refsect1><title>
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml:65
+msgid "The deb and deb-src types"
+msgstr "deb タイプと deb-src タイプ"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:66
+#, fuzzy
+#| msgid ""
+#| "The <literal>deb</literal> type references a typical two-level Debian "
+#| "archive, <filename>distribution/component</filename>. Typically, "
+#| "<literal>distribution</literal> is generally one of <literal>stable</"
+#| "literal> <literal>unstable</literal> or <literal>testing</literal> while "
+#| "component is one of <literal>main</literal> <literal>contrib</literal> "
+#| "<literal>non-free</literal> or <literal>non-us</literal>. The "
+#| "<literal>deb-src</literal> type describes a debian distribution's source "
+#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
+#| "src</literal> line is required to fetch source indexes."
+msgid ""
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally an archive name like "
+"<literal>stable</literal> or <literal>testing</literal> or a codename like "
+"<literal>&stable-codename;</literal> or <literal>&testing-codename;</"
+"literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
+msgstr ""
+"<literal>deb</literal> タイプでは典型的な 2 段階の Debian アーカイブ "
+"<filename>distribution/component</filename> を記述します。よくあるケースで"
+"は、<literal>distribution</literal> は通常 <literal>stable</literal>, "
+"<literal>unstable</literal>, <literal>testing</literal> のどれか、component "
+"は、<literal>main</literal>, <literal>contrib</literal>, <literal>non-free</"
+"literal>, <literal>non-us</literal> のどれかです。<literal>deb-src</literal> "
+"タイプでは、Debian ディストリビューションのソースコードを、<literal>deb</"
+"literal> タイプと同じ形式で記述します。<literal>deb-src</literal> 行は、ソー"
+"スインデックスを取得するのに必要です。"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:78
+msgid ""
+"The format for a <filename>sources.list</filename> entry using the "
+"<literal>deb</literal> and <literal>deb-src</literal> types is:"
+msgstr ""
+"<literal>deb</literal> タイプと <literal>deb-src</literal> タイプで使用する "
+"<filename>sources.list</filename> エントリのフォーマットは、以下のようになり"
+"ます。"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:81
+#, fuzzy, no-wrap
+#| msgid "deb uri distribution [component1] [component2] [...]"
+msgid "deb [ options ] uri distribution [component1] [component2] [...]"
+msgstr "deb uri distribution [component1] [component2] [...]"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:83
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>distribution</literal> can specify an exact path, in which case "
+#| "the components must be omitted and <literal>distribution</literal> must "
+#| "end with a slash (<literal>/</literal>). This is useful for the case when "
+#| "only a particular sub-section of the archive denoted by the URI is of "
+#| "interest. If <literal>distribution</literal> does not specify an exact "
+#| "path, at least one <literal>component</literal> must be present."
+msgid ""
+"The URI for the <literal>deb</literal> type must specify the base of the "
+"Debian distribution, from which APT will find the information it needs. "
+"<literal>distribution</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>distribution</literal> must end with "
+"a slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-section of the archive denoted by the URI is of interest. If "
+"<literal>distribution</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
+msgstr ""
+"<literal>deb</literal> タイプの URI は、APT が必要な情報を見つけられるよう"
+"に、Debian ディストリビューションの基底を指定しなければなりません。"
+"<literal>distribution</literal> には正確なパスを指定できます。その場合 "
+"component を省略し、<literal>distribution</literal> はスラッシュ (<literal>/"
+"</literal>) で終わらなくてはなりません。これは URL で指定されたアーカイブの、"
+"特定のサブセクションのみに関心があるときに役に立ちます。"
+"<literal>distribution</literal> に正確なパスを指定しないのなら、少なくともひ"
+"とつは <literal>component</literal> を指定しなければなりません。"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:92
+#, fuzzy
+#| msgid ""
+#| "<literal>distribution</literal> may also contain a variable, <literal>"
+#| "$(ARCH)</literal> which expands to the Debian architecture (i386, amd64, "
+#| "powerpc, ...) used on the system. This permits architecture-independent "
+#| "<filename>sources.list</filename> files to be used. In general this is "
+#| "only of interest when specifying an exact path, <literal>APT</literal> "
+#| "will automatically generate a URI with the current architecture otherwise."
+msgid ""
+"<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)"
+"</literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path, "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>distribution</literal> は、<literal>$(ARCH)</literal> 変数を含む場合"
+"があります。<literal>$(ARCH)</literal> 変数は、システムで使用している Debian "
+"アーキテクチャ (i386, amd64, powerpc, ...) に展開されます。これにより、アーキ"
+"テクチャに依存しない <filename>sources.list</filename> ファイルを使用できま"
+"す。一般的に、これは正しいパスを指定するときに気にするだけです。そうでない場"
+"合は、<literal>APT</literal> は現在のアーキテクチャで URI を自動的に生成しま"
+"す。"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:100
+msgid ""
+"Since only one distribution can be specified per line it may be necessary to "
+"have multiple lines for the same URI, if a subset of all available "
+"distributions or components at that location is desired. APT will sort the "
+"URI list after it has generated a complete set internally, and will collapse "
+"multiple references to the same Internet host, for instance, into a single "
+"connection, so that it does not inefficiently establish an FTP connection, "
+"close it, do something else, and then re-establish a connection to that same "
+"host. This feature is useful for accessing busy FTP sites with limits on the "
+"number of simultaneous anonymous users. APT also parallelizes connections to "
+"different hosts to more effectively deal with sites with low bandwidth."
+msgstr ""
+"有効な全 distribution, component の場所から、一部が必要な場合、1 行につき 1 "
+"distribution しか指定できないため、同じ URI の行を複数記述することになるで"
+"しょう。APT は内部で URI リストを生成してから、並べ替えます。そして、同じイン"
+"ターネットホストに対しては複数の参照をまとめます。例えば FTP 接続後、切断して"
+"からまた同じホストに再接続するといった、効率の悪いことをせずに、1 接続にまと"
+"めます。この機能は、同時接続匿名ユーザ数を制限している、混んでいる FTP サイト"
+"にアクセスするのに便利です。APT は、帯域の狭いサイトを効率よく扱うのに、異な"
+"るホストへは、接続を並行して行うようにもしています。"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:112
+msgid ""
+"<literal>options</literal> is always optional and needs to be surrounded by "
+"square brackets. It can consist of multiple settings in the form "
+"<literal><replaceable>setting</replaceable>=<replaceable>value</"
+"replaceable></literal>. Multiple settings are separated by spaces. The "
+"following settings are supported by APT (note however that unsupported "
+"settings will be ignored silently):"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml:117
+msgid ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> can be used to specify for which architectures "
+"information should be downloaded. If this option is not set all "
+"architectures defined by the <literal>APT::Architectures</literal> option "
+"will be downloaded."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml:121
+msgid ""
+"<literal>trusted=yes</literal> can be set to indicate that packages from "
+"this source are always authenticated even if the <filename>Release</"
+"filename> file is not signed or the signature can't be checked. This "
+"disables parts of &apt-secure; and should therefore only be used in a local "
+"and trusted context. <literal>trusted=no</literal> is the opposite which "
+"handles even correctly authenticated sources as not authenticated."
+msgstr ""
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:128
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+"最優先する取得元を最初に記述するというように、優先順に取得元を記述するのは重"
+"要です。一般的には、スピードの速い順に並べることになる (例えば、CD-ROM に続い"
+"てローカルネットワークのホスト、さらに続いて彼方のインターネットホスト) で"
+"しょう。"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:133
+msgid "Some examples:"
+msgstr "例:"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:135
+#, no-wrap
+msgid ""
+"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
+"deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n"
+" "
+msgstr ""
+"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
+"deb http://security.debian.org/ &stable-codename;/updates main contrib non-free\n"
+" "
+
+# type: Content of: <refentry><refsect1><title>
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml:141
+msgid "URI specification"
+msgstr "URI の仕様"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:143
+#, fuzzy
+#| msgid "more recognizable URI types"
+msgid "The currently recognized URI types are:"
+msgstr "さらに認識できる URI タイプ"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:147
+msgid ""
+"The file scheme allows an arbitrary directory in the file system to be "
+"considered an archive. This is useful for NFS mounts and local mirrors or "
+"archives."
+msgstr ""
+"file スキームは、システム内の任意のディレクトリを、アーカイブとして扱えるよう"
+"にします。これは NFS マウントやローカルミラーで便利です。"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:154
+msgid ""
+"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
+"Use the &apt-cdrom; program to create cdrom entries in the source list."
+msgstr ""
+"cdrom スキームは、APT がローカル CD-ROM ドライブを、メディア交換しながら使え"
+"るようにします。取得元リストに cdrom エントリを追加するには、&apt-cdrom; プロ"
+"グラムを使用してください。"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:161
+msgid ""
+"The http scheme specifies an HTTP server for the archive. If an environment "
+"variable <envar>http_proxy</envar> is set with the format http://server:"
+"port/, the proxy server specified in <envar>http_proxy</envar> will be used. "
+"Users of authenticated HTTP/1.1 proxies may use a string of the format "
+"http://user:pass@server:port/. Note that this is an insecure method of "
+"authentication."
+msgstr ""
+"http スキームはアーカイブとして、HTTP サーバを指定します。環境変数 "
+"<envar>http_proxy</envar> が、http://server:port/ と言った形で指定されていれ"
+"ば、<envar>http_proxy</envar> で指定したプロキシサーバを使用します。ユーザ認"
+"証が必要な HTTP/1.1 プロキシの場合、http://user:pass@server:port/ という形で"
+"指定してください。この認証方法は安全ではないことに注意してください。"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:172
+#, fuzzy
+#| msgid ""
+#| "The ftp scheme specifies an FTP server for the archive. APT's FTP "
+#| "behavior is highly configurable; for more information see the &apt-conf; "
+#| "manual page. Please note that a ftp proxy can be specified by using the "
+#| "<envar>ftp_proxy</envar> environment variable. It is possible to specify "
+#| "a http proxy (http proxy servers often understand ftp urls) using this "
+#| "method and ONLY this method. ftp proxies using http specified in the "
+#| "configuration file will be ignored."
+msgid ""
+"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
+"is highly configurable; for more information see the &apt-conf; manual page. "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
+"ignored."
+msgstr ""
+"ftp スキームは、アーカイブに FTP サーバを指定します。APT の FTP の振る舞い"
+"は、高度に設定できます。詳細は、&apt-conf; のマニュアルページをご覧ください。"
+"ftp プロキシは、<envar>ftp_proxy</envar> 環境変数で指定することに注意してくだ"
+"さい。この方法用に、さらにこの方法でしか使用しないのに、http プロキシを使用す"
+"ることができます (http プロキシサーバは大抵 ftp urlも理解できます)。設定ファ"
+"イルで http を使用する際に、ftp プロキシを使用するよう設定してあっても無視さ"
+"れます。"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:184
+#, fuzzy
+#| msgid ""
+#| "The copy scheme is identical to the file scheme except that packages are "
+#| "copied into the cache directory instead of used directly at their "
+#| "location. This is useful for people using a zip disk to copy files "
+#| "around with APT."
+msgid ""
+"The copy scheme is identical to the file scheme except that packages are "
+"copied into the cache directory instead of used directly at their location. "
+"This is useful for people using removable media to copy files around with "
+"APT."
+msgstr ""
+"copy スキームは、file スキームと同様ですが、パッケージをその場で使用せず、"
+"キャッシュディレクトリにコピーするところが違います。zip ディスクを使用してい"
+"て、APT でコピーを行う場合に便利です。"
+
+# type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:191
+#, fuzzy
+#| msgid ""
+#| "The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given "
+#| "user and access the files. It is a good idea to do prior arrangements "
+#| "with RSA keys or rhosts. Access to files on the remote uses standard "
+#| "<command>find</command> and <command>dd</command> commands to perform the "
+#| "file transfers from the remote."
+msgid ""
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
+msgstr ""
+"rsh/ssh メソッドは、与えられたユーザでリモートホストに接続し、ファイルにアク"
+"セスするのに rsh/ssh を使用します。あらかじめ RSA キーや rhosts の配置してお"
+"くと良いでしょう。リモートホストのファイルへのアクセスの際、ファイル転送に標"
+"準の <command>find</command> コマンドや <command>dd</command> コマンドを使用"
+"します。"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
+#: sources.list.5.xml:198
+#, fuzzy
+#| msgid "more recognizable URI types"
+msgid "adding more recognizable URI types"
+msgstr "さらに認識できる URI タイプ"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml:200
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
+"transport-debtorrent;."
+msgstr ""
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:212
+msgid ""
+"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for "
+"stable/main, stable/contrib, and stable/non-free."
+msgstr ""
+"/home/jason/debian に格納されている stable/main, stable/contrib, stable/non-"
+"free 用のローカル (または NFS) アーカイブを使用します。"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:214
+#, no-wrap
+msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgstr "deb file:/home/jason/debian stable main contrib non-free"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:216
+msgid "As above, except this uses the unstable (development) distribution."
+msgstr "上記同様ですが、不安定版 (開発版) を使用します。"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:217
+#, no-wrap
+msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgstr "deb file:/home/jason/debian unstable main contrib non-free"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:219
+msgid "Source line for the above"
+msgstr "上記のソース行"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:220
+#, no-wrap
+msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgstr "deb-src file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:222
+msgid ""
+"The first line gets package information for the architectures in "
+"<literal>APT::Architectures</literal> while the second always retrieves "
+"<literal>amd64</literal> and <literal>armel</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:224
+#, no-wrap
+msgid ""
+"deb http://ftp.debian.org/debian &stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+msgstr ""
+"deb http://ftp.debian.org/debian &stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:227
+msgid ""
+"Uses HTTP to access the archive at archive.debian.org, and uses only the "
+"hamm/main area."
+msgstr ""
+"archive.debian.org のアーカイブに HTTP アクセスし、hamm/main のみを使用しま"
+"す。"
+
+# type: <example></example>
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:229
+#, no-wrap
+msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:231
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the &stable-codename;/contrib area."
+msgstr ""
+"ftp.debian.org のアーカイブに FTP アクセスし、debian ディレクトリ以下の "
+"&stable-codename;/contrib のみを使用します。"
+
+# type: <example></example>
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:233
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:235
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the unstable/contrib area. If this line appears as "
+"well as the one in the previous example in <filename>sources.list</filename> "
+"a single FTP session will be used for both resource lines."
+msgstr ""
+"ftp.debian.org のアーカイブに FTP アクセスし、debian ディレクトリ以下の "
+"unstable/contrib のみを使用します。<filename>sources.list</filename> に上記サ"
+"ンプルと一緒に指定された場合、両方のリソース行に対応する FTP セッションはひと"
+"つだけになります。"
+
+# type: <example></example>
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml:239
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml:248
+#, no-wrap
+msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:241
+#, fuzzy
+#| msgid ""
+#| "Uses HTTP to access the archive at nonus.debian.org, under the debian-non-"
+#| "US directory, and uses only files found under <filename>unstable/binary-"
+#| "i386</filename> on i386 machines, <filename>unstable/binary-m68k</"
+#| "filename> on m68k, and so forth for other supported architectures. [Note "
+#| "this example only illustrates how to use the substitution variable; non-"
+#| "us is no longer structured like this] <placeholder type=\"literallayout\" "
+#| "id=\"0\"/>"
+msgid ""
+"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+"directory, and uses only files found under <filename>unstable/binary-i386</"
+"filename> on i386 machines, <filename>unstable/binary-amd64</filename> on "
+"amd64, and so forth for other supported architectures. [Note this example "
+"only illustrates how to use the substitution variable; official debian "
+"archives are not structured like this] <placeholder type=\"literallayout\" "
+"id=\"0\"/>"
+msgstr ""
+"nonus.debian.org のアーカイブに HTTP アクセスし、debian-non-US ディレクトリ以"
+"下を使用します。また、i386 マシンでは <filename>unstable/binary-i386</"
+"filename> 以下にあるファイル、m68k マシンでは <filename>unstable/binary-"
+"m68k</filename> 以下にあるファイル、その他サポートするアーキテクチャごとの"
+"ファイルのみ使用します。[このサンプルは変数展開の使用法の説明でしかないことに"
+"注意してください。non-us はこのような構造になっていません] <placeholder type="
+"\"literallayout\" id=\"0\"/>"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:253
+msgid "&apt-cache; &apt-conf;"
+msgstr "&apt-cache; &apt-conf;"
+
+#. type: Content of: <refentry><refmeta><manvolnum>
+#: apt-extracttemplates.1.xml:26 apt-sortpkgs.1.xml:26 apt-ftparchive.1.xml:26
+msgid "1"
+msgstr "1"
+
+# type: Content of: <refentry><refnamediv><refpurpose>
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-extracttemplates.1.xml:33
+#, fuzzy
+#| msgid "Utility to extract DebConf config and templates from Debian packages"
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
+msgstr ""
+"Debian パッケージから DebConf 設定と DebConf テンプレートを抽出するユーティリ"
+"ティ"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:39
+msgid ""
+"<command>apt-extracttemplates</command> will take one or more Debian package "
+"files as input and write out (to a temporary directory) all associated "
+"config scripts and template files. For each passed in package that contains "
+"config scripts and templates, one line of output will be generated in the "
+"format:"
+msgstr ""
+"<command>apt-extracttemplates</command> は、入力に複数の Debian パッケージを"
+"とり、関連する設定スクリプトとテンプレートファイルを (一時ディレクトリに) 出"
+"力します。設定スクリプト・テンプレートファイルを持つ、渡されたパッケージそれ"
+"ぞれに対し、以下の形式で 1 行ずつ出力します。"
+
+# type: Content of: <refentry><refsect1><para>
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml:44
+msgid "package version template-file config-script"
+msgstr "package version template-file config-script"
projects / apt.git / blobdiff