msgstr ""
"Project-Id-Version: apt 0.8.0~pre1\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2012-06-06 14:56+0300\n"
+"POT-Creation-Date: 2012-06-09 22:05+0300\n"
"PO-Revision-Date: 2010-08-25 23:07+0100\n"
"Last-Translator: Américo Monteiro <a_monteiro@netcabo.pt>\n"
"Language-Team: Portuguese <traduz@debianpt.org>\n"
#. type: Content of: <refentry><refsect1><title>
#: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125
-#: apt.conf.5.xml:1118 apt_preferences.5.xml:698
+#: apt.conf.5.xml:1156 apt_preferences.5.xml:698
msgid "Files"
msgstr "Ficheiros"
#. type: Content of: <refentry><refsect1><title>
#: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131
-#: apt-secure.8.xml:192 apt-cdrom.8.xml:144 apt-config.8.xml:109
-#: apt.conf.5.xml:1124 apt_preferences.5.xml:705 sources.list.5.xml:252
+#: apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109
+#: apt.conf.5.xml:1162 apt_preferences.5.xml:705 sources.list.5.xml:252
#: apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63
#: apt-ftparchive.1.xml:607
msgid "See Also"
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml:60
msgid ""
-"If a package comes from a archive without a signature or with a signature "
-"that apt does not have a key for that package is considered untrusted and "
+"If a package comes from a archive without a signature, or with a signature "
+"that apt does not have a key for, that package is considered untrusted, and "
"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives, future releases might force all "
+"currently only warn for unsigned archives; future releases might force all "
"sources to be verified before downloading packages from them."
msgstr ""
"Se um pacote vem dum arquivo sem assinatura ou com uma assinatura para a "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml:77
msgid ""
-"The chain of trust from an apt archive to the end user is made up of "
-"different steps. <command>apt-secure</command> is the last step in this "
-"chain, trusting an archive does not mean that the packages that you trust it "
-"do not contain malicious code but means that you trust the archive "
-"maintainer. It's the archive maintainer responsibility to ensure that the "
-"archive integrity is correct."
+"The chain of trust from an apt archive to the end user is made up of several "
+"steps. <command>apt-secure</command> is the last step in this chain; "
+"trusting an archive does not mean that you trust its packages not to contain "
+"malicious code, but means that you trust the archive maintainer. It's the "
+"archive maintainer's responsibility to ensure that the archive's integrity "
+"is preserved."
msgstr ""
"A corrente de confiança desde um arquivo apt até ao utilizador final é feita "
"em diferentes passos. O <command>apt-secure</command> é o último passo nesta "
#: apt-secure.8.xml:92
msgid ""
"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. This upload in order to "
-"become effective needs to be signed by a key of a maintainer within the "
-"Debian maintainer's keyring (available in the debian-keyring package). "
-"Maintainer's keys are signed by other maintainers following pre-established "
-"procedures to ensure the identity of the key holder."
+"or a new version of a package to the Debian archive. In order to become "
+"effective, this upload needs to be signed by a key contained in the Debian "
+"Maintainers keyring (available in the debian-keyring package). Maintainers' "
+"keys are signed by other maintainers following pre-established procedures to "
+"ensure the identity of the key holder."
msgstr ""
"A corrente de confiança em Debian começa quando o responsável faz o upload "
"de um novo pacote ou de uma nova versão de um pacote para o arquivo Debian. "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml:102
+#, fuzzy
+#| msgid ""
+#| "Once the uploaded package is verified and included in the archive, the "
+#| "maintainer signature is stripped off, and an MD5 sum of the package is "
+#| "computed and put in the Packages file. The MD5 sums of all of the "
+#| "Packages files are then computed and put into the Release file. The "
+#| "Release file is then signed by the archive key (which is created once a "
+#| "year) and distributed through the FTP server. This key is also on the "
+#| "Debian keyring."
msgid ""
"Once the uploaded package is verified and included in the archive, the "
-"maintainer signature is stripped off, an MD5 sum of the package is computed "
-"and put in the Packages file. The MD5 sum of all of the packages files are "
-"then computed and put into the Release file. The Release file is then signed "
-"by the archive key (which is created once a year) and distributed through "
-"the FTP server. This key is also on the Debian keyring."
+"maintainer signature is stripped off, and checksums of the package are "
+"computed and put in the Packages file. The checksums of all of the Packages "
+"files are then computed and put into the Release file. The Release file is "
+"then signed by the archive key for this Debian release, and distributed "
+"alongside the packages and the Packages files on Debian mirrors. The keys "
+"are in the Debian archive keyring available in the <package>debian-archive-"
+"keyring</package> package."
msgstr ""
"Após o upload, o pacote é verificado e incluído no arquivo, a assinatura do "
"responsável é despojada, é computado um sumário MD5 do pacote e colocado no "
"Debian."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:112
+#: apt-secure.8.xml:113
+#, fuzzy
+#| msgid ""
+#| "Any end user can check the signature of the Release file, extract the MD5 "
+#| "sum of a package from it and compare it with the MD5 sum of the package "
+#| "he downloaded. Prior to version 0.6 only the MD5 sum of the downloaded "
+#| "Debian package was checked. Now both the MD5 sum and the signature of the "
+#| "Release file are checked."
msgid ""
-"Any end user can check the signature of the Release file, extract the MD5 "
-"sum of a package from it and compare it with the MD5 sum of the package he "
-"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian "
-"package was checked. Now both the MD5 sum and the signature of the Release "
-"file are checked."
+"End users can check the signature of the Release file, extract a checksum of "
+"a package from it and compare it with the checksum of the package they "
+"downloaded by hand - or rely on APT doing this automatically."
msgstr ""
"Qualquer utilizador final pode verificar a assinatura do ficheiro Release, "
"extrair o sumário MD5 de um pacote a partir dele, e compará-lo com o sumário "
"sumário MD5 e a assinatura do ficheiro Release."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:119
+#: apt-secure.8.xml:118
msgid ""
"Notice that this is distinct from checking signatures on a per package "
"basis. It is designed to prevent two possible attacks:"
"desenhado para prevenir dois ataques possíveis:"
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:124
+#: apt-secure.8.xml:123
msgid ""
"<literal>Network \"man in the middle\" attacks</literal>. Without signature "
-"checking, a malicious agent can introduce himself in the package download "
-"process and provide malicious software either by controlling a network "
-"element (router, switch, etc.) or by redirecting traffic to a rogue server "
-"(through arp or DNS spoofing attacks)."
+"checking, malicious agents can introduce themselves into the package "
+"download process and provide malicious software either by controlling a "
+"network element (router, switch, etc.) or by redirecting traffic to a rogue "
+"server (through ARP or DNS spoofing attacks)."
msgstr ""
"<literal>Ataques de rede \"man in the middle\"</literal>. Sem verificação de "
"assinatura, um agente malicioso pode introduzir-se ele próprio no processo "
"de descarga de pacotes e disponibilizar software malicioso seja ao controlar "
"um elemento de rede (router, switch, etc.) ou ao redireccionar tráfego para "
-"um servidor impostor (através de ataques de fraude de arp ou DNS)."
+"um servidor impostor (através de ataques de fraude de ARP ou DNS)."
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:132
+#: apt-secure.8.xml:131
msgid ""
"<literal>Mirror network compromise</literal>. Without signature checking, a "
"malicious agent can compromise a mirror host and modify the files in it to "
"descarregam pacotes a partir dessa máquina."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:139
+#: apt-secure.8.xml:138
msgid ""
"However, it does not defend against a compromise of the Debian master server "
"itself (which signs the packages) or against a compromise of the key used to "
"mecanismo pode complementar uma assinatura por-pacote."
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:145
+#: apt-secure.8.xml:144
msgid "User configuration"
msgstr "Configuração do utilizador"
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:147
+#: apt-secure.8.xml:146
msgid ""
"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys although an installation of "
-"this release will automatically provide the default Debian archive signing "
+"by apt. It can be used to add or remove keys, although an installation of "
+"this release will automatically contain the default Debian archive signing "
"keys used in the Debian package repositories."
msgstr ""
"<command>apt-key</command> é o programa que gere a lista de chaves usada "
"pacotes Debian."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:154
+#: apt-secure.8.xml:153
#, fuzzy
#| msgid ""
#| "In order to add a new key you need to first download it (you should make "
"arquivos que você configurou."
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:163
+#: apt-secure.8.xml:162
msgid "Archive configuration"
msgstr "Configuração de arquivos"
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:165
+#: apt-secure.8.xml:164
msgid ""
"If you want to provide archive signatures in an archive under your "
"maintenance you have to:"
"manutenção, você tem que:"
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:170
+#: apt-secure.8.xml:169
msgid ""
"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist "
"already. You can do this by running <command>apt-ftparchive release</"
"command> (disponibilizado no apt-utils)."
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:175
+#: apt-secure.8.xml:174
#, fuzzy
#| msgid ""
#| "<emphasis>Sign it</emphasis>. You can do this by running <command>gpg -"
"abs -o Release.gpg Release</command>."
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:179
+#: apt-secure.8.xml:178
msgid ""
"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
"know what key they need to import in order to authenticate the files in the "
"autenticar os ficheiros no arquivo."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:186
+#: apt-secure.8.xml:185
msgid ""
-"Whenever the contents of the archive changes (new packages are added or "
-"removed) the archive maintainer has to follow the first two steps previously "
-"outlined."
+"Whenever the contents of the archive change (new packages are added or "
+"removed) the archive maintainer has to follow the first two steps outlined "
+"above."
msgstr ""
"Sempre que o conteúdo do arquivo mude (são adicionados novos pacotes ou "
"removidos), o responsável do arquivo tem que seguir os primeiros dois passos "
"previamente delineados."
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:194
+#: apt-secure.8.xml:193
msgid ""
"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, "
"&debsign; &debsig-verify;, &gpg;"
"&debsign; &debsig-verify;, &gpg;"
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:198
+#: apt-secure.8.xml:197
msgid ""
"For more background information you might want to review the <ulink url="
"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
"ulink> de V. Alex Brennen."
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:211
+#: apt-secure.8.xml:210
msgid "Manpage Authors"
msgstr "Autores do manual"
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:213
+#: apt-secure.8.xml:212
msgid ""
"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac "
"Jones, Colin Walters, Florian Weimer and Michael Vogt."
#. type: Content of: <refentry><refsect1><para>
#: apt.conf.5.xml:42
+#, fuzzy
+#| msgid ""
+#| "<filename>apt.conf</filename> is the main configuration file for the APT "
+#| "suite of tools, but by far not the only place changes to options can be "
+#| "made. All tools therefore share the configuration files and also use a "
+#| "common command line parser to provide a uniform environment."
msgid ""
-"<filename>apt.conf</filename> is the main configuration file for the APT "
-"suite of tools, but by far not the only place changes to options can be "
-"made. All tools therefore share the configuration files and also use a "
-"common command line parser to provide a uniform environment."
+"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared "
+"by all the tools in the APT suite of tools, though it is by no means the "
+"only place options can be set. The suite also shares a common command line "
+"parser to provide a uniform environment."
msgstr ""
"<filename>apt.conf</filename> é o ficheiro de configuração principal para a "
"suite de ferramentas do APT, as não é o único lugar onde se podem fazer "
"disponibilizar um ambiente uniforme."
#. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:47
+#: apt.conf.5.xml:48
msgid ""
"When an APT tool starts up it will read the configuration files in the "
"following order:"
"seguinte ordem:"
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:49
+#: apt.conf.5.xml:50
msgid ""
"the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
"any)"
"(se existir)"
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:51
+#: apt.conf.5.xml:52
#, fuzzy
#| msgid ""
#| "all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
"extension and which only contain alphanumeric, hyphen (-), underscore (_) "
"and period (.) characters. Otherwise APT will print a notice that it has "
"ignored a file, unless that file matches a pattern in the <literal>Dir::"
-"Ignore-Files-Silently</literal> configuration list - in this case it will be "
-"silently ignored."
+"Ignore-Files-Silently</literal> configuration list - in which case it will "
+"be silently ignored."
msgstr ""
"todos os ficheiros em <literal>Dir::Etc::Parts</literal> em ordem ascendente "
"alfanumérica sem extensão ou com \"<literal>conf</literal>\" como extensão "
"underscore (_) e ponto (.) - caso contrário serão ignorados em silêncio."
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:58
+#: apt.conf.5.xml:59
msgid ""
"the main configuration file specified by <literal>Dir::Etc::main</literal>"
msgstr ""
"main</literal>"
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:60
+#: apt.conf.5.xml:61
msgid ""
"the command line options are applied to override the configuration "
"directives or to load even more configuration files."
"configuração ou para carregar mais ficheiros de configuração."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:64
+#: apt.conf.5.xml:65
msgid "Syntax"
msgstr "Sintaxe"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:65
+#: apt.conf.5.xml:66
msgid ""
"The configuration file is organized in a tree with options organized into "
"functional groups. Option specification is given with a double colon "
-"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option "
+"notation; for instance <literal>APT::Get::Assume-Yes</literal> is an option "
"within the APT tool group, for the Get tool. Options do not inherit from "
"their parent groups."
msgstr ""
"ferramenta Get. A opções não herdam dos seus grupos parentes."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:71
+#: apt.conf.5.xml:72
+#, fuzzy
+#| msgid ""
+#| "Syntactically the configuration language is modeled after what the ISC "
+#| "tools such as bind and dhcp use. Lines starting with <literal>//</"
+#| "literal> are treated as comments (ignored), as well as all text between "
+#| "<literal>/*</literal> and <literal>*/</literal>, just like C/C++ "
+#| "comments. Each line is of the form <literal>APT::Get::Assume-Yes \"true"
+#| "\";</literal>. The trailing semicolon and the quotes are required. The "
+#| "value must be on one line, and there is no kind of string concatenation. "
+#| "It must not include inside quotes. The behavior of the backslash \"\\\" "
+#| "and escaped characters inside a value is undefined and it should not be "
+#| "used. An option name may include alphanumerical characters and the \"/-:._"
+#| "+\" characters. A new scope can be opened with curly braces, like:"
msgid ""
"Syntactically the configuration language is modeled after what the ISC tools "
"such as bind and dhcp use. Lines starting with <literal>//</literal> are "
"treated as comments (ignored), as well as all text between <literal>/*</"
"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is "
-"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing "
-"semicolon and the quotes are required. The value must be on one line, and "
-"there is no kind of string concatenation. It must not include inside "
-"quotes. The behavior of the backslash \"\\\" and escaped characters inside "
-"a value is undefined and it should not be used. An option name may include "
-"alphanumerical characters and the \"/-:._+\" characters. A new scope can be "
-"opened with curly braces, like:"
+"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The "
+"quotation marks and trailing semicolon are required. The value must be on "
+"one line, and there is no kind of string concatenation. Values must not "
+"include backslashes or extra quotation marks. Option names are made up of "
+"alphanumeric characters and the characters \"/-:._+\". A new scope can be "
+"opened with curly braces, like this:"
msgstr ""
"Sintacticamente a linguagem de configuração é modelada após o que as "
"ferramentas ISC usam, como o bind e o dhcp. As linhas que começam com "
#. type: Content of: <refentry><refsect1><para>
#: apt.conf.5.xml:93
+#, fuzzy
+#| msgid ""
+#| "with newlines placed to make it more readable. Lists can be created by "
+#| "opening a scope and including a single string enclosed in quotes followed "
+#| "by a semicolon. Multiple entries can be included, each separated by a "
+#| "semicolon."
msgid ""
"with newlines placed to make it more readable. Lists can be created by "
"opening a scope and including a single string enclosed in quotes followed by "
-"a semicolon. Multiple entries can be included, each separated by a semicolon."
+"a semicolon. Multiple entries can be included, separated by a semicolon."
msgstr ""
"com novas linhas colocadas para o tornar mais legível. As listas podem ser "
"criadas ao abrir um scope e incluindo uma string única entre aspas seguida "
#. type: Content of: <refentry><refsect1><para>
#: apt.conf.5.xml:105
+#, fuzzy
+#| msgid ""
+#| "The names of the configuration items are not case-sensitive. So in the "
+#| "previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
msgid ""
-"The names of the configuration items are not case-sensitive. So in the "
-"previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
+"Case is not significant in names of configuration items, so in the previous "
+"example you could use <literal>dpkg::pre-install-pkgs</literal>."
msgstr ""
"Os nomes dos items de configuração não são sensíveis a maiúsculas/"
"minúsculas. Portanto no exemplo prévio você poderia usar <literal>dpkg::pre-"
#. type: Content of: <refentry><refsect1><para>
#: apt.conf.5.xml:108
msgid ""
-"Names for the configuration items are optional if a list is defined as it "
-"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. "
-"If you don't specify a name a new entry will simply add a new option to the "
-"list. If you specify a name you can override the option as every other "
-"option by reassigning a new value to the option."
+"Names for the configuration items are optional if a list is defined as can "
+"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If "
+"you don't specify a name a new entry will simply add a new option to the "
+"list. If you specify a name you can override the option in the same way as "
+"any other option by reassigning a new value to the option."
msgstr ""
"Os nomes dos items de configuração são opcionais se uma lista for definida "
"com pode ser vista no exemplo <literal>DPkg::Pre-Install-Pkgs</literal> "
#. type: Content of: <refentry><refsect1><para>
#: apt.conf.5.xml:113
-msgid ""
-"Two specials are allowed, <literal>#include</literal> (which is deprecated "
-"and not supported by alternative implementations) and <literal>#clear</"
-"literal>: <literal>#include</literal> will include the given file, unless "
-"the filename ends in a slash, then the whole directory is included. "
-"<literal>#clear</literal> is used to erase a part of the configuration tree. "
-"The specified element and all its descendants are erased. (Note that these "
-"lines also need to end with a semicolon.)"
+#, fuzzy
+#| msgid ""
+#| "Two specials are allowed, <literal>#include</literal> (which is "
+#| "deprecated and not supported by alternative implementations) and "
+#| "<literal>#clear</literal>: <literal>#include</literal> will include the "
+#| "given file, unless the filename ends in a slash, then the whole directory "
+#| "is included. <literal>#clear</literal> is used to erase a part of the "
+#| "configuration tree. The specified element and all its descendants are "
+#| "erased. (Note that these lines also need to end with a semicolon.)"
+msgid ""
+"Two special commands are defined: <literal>#include</literal> (which is "
+"deprecated and not supported by alternative implementations) and "
+"<literal>#clear</literal>. <literal>#include</literal> will include the "
+"given file, unless the filename ends in a slash, in which case the whole "
+"directory is included. <literal>#clear</literal> is used to erase a part of "
+"the configuration tree. The specified element and all its descendants are "
+"erased. (Note that these lines also need to end with a semicolon.)"
msgstr ""
"São permitidas duas especiais, <literal>#include</literal> (a qual está "
"obsoleta e não é suportada por implementações alternativas) e "
"acabar com um 'ponto e vírgula' (;) .)"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:121
-msgid ""
-"The #clear command is the only way to delete a list or a complete scope. "
-"Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previously written entries. Only options can be "
-"overridden by addressing a new value to it - lists and scopes can't be "
-"overridden, only cleared."
+#: apt.conf.5.xml:123
+#, fuzzy
+#| msgid ""
+#| "The #clear command is the only way to delete a list or a complete scope. "
+#| "Reopening a scope or the ::-style described below will <emphasis>not</"
+#| "emphasis> override previously written entries. Only options can be "
+#| "overridden by addressing a new value to it - lists and scopes can't be "
+#| "overridden, only cleared."
+msgid ""
+"The <literal>#clear</literal> command is the only way to delete a list or a "
+"complete scope. Reopening a scope (or using the syntax described below with "
+"an appended <literal>::</literal>) will <emphasis>not</emphasis> override "
+"previously written entries. Options can only be overridden by addressing a "
+"new value to them - lists and scopes can't be overridden, only cleared."
msgstr ""
"O comando #clear é a única maneira de apagar uma lista ou um scope completo. "
"Reabrindo um scope ou o ::-style descrito abaixo <emphasis>não</emphasis> "
"sobrepostos, apenas limpos."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:126
+#: apt.conf.5.xml:131
#, fuzzy
#| msgid ""
-#| "All of the APT tools take a -o option which allows an arbitrary "
+#| "All of the APT tools take an -o option which allows an arbitrary "
#| "configuration directive to be specified on the command line. The syntax "
#| "is a full option name (<literal>APT::Get::Assume-Yes</literal> for "
#| "instance) followed by an equals sign then the new value of the option. "
#| "Lists can be appended too by adding a trailing :: to the list name. (As "
#| "you might suspect: The scope syntax can't be used on the command line.)"
msgid ""
-"All of the APT tools take a -o option which allows an arbitrary "
+"All of the APT tools take an -o option which allows an arbitrary "
"configuration directive to be specified on the command line. The syntax is a "
"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
"followed by an equals sign then the new value of the option. To append a new "
-"element to a list, add a trailing :: to the name of the list. (As you might "
-"suspect: The scope syntax can't be used on the command line.)"
+"element to a list, add a trailing <literal>::</literal> to the name of the "
+"list. (As you might suspect, the scope syntax can't be used on the command "
+"line.)"
msgstr ""
"Todas as ferramentas do APT recebem uma opção -o que permite uma directiva "
"de configuração arbitrária para ser especificada na linha de comandos. A "
"usada na linha de comandos.)"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:133
+#: apt.conf.5.xml:139
#, fuzzy
#| msgid ""
#| "Note that you can use :: only for appending one item per line to a list "
#| "encounter this misuse, so please correct such statements now as long as "
#| "APT doesn't complain explicit about them."
msgid ""
-"Note that you can use :: only for appending one item per line to a list and "
-"that you should not use it in combination with the scope syntax. (The scope "
-"syntax implicit insert ::) Using both syntaxes together will trigger a bug "
-"which some users unfortunately depend on: An option with the unusual name "
-"\"<literal>::</literal>\" which acts like every other option with a name. "
-"These introduces many problems including that a user who writes multiple "
-"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a "
-"list will gain the opposite as only the last assignment for this option "
-"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise "
-"errors and will stop working if they encounter this misuse, so please "
-"correct such statements now as long as APT doesn't complain explicit about "
-"them."
+"Note that appending items to a list using <literal>::</literal> only works "
+"for one item per line, and that you should not use it in combination with "
+"the scope syntax (which adds <literal>::</literal> implicitly). Using both "
+"syntaxes together will trigger a bug which some users unfortunately depend "
+"on: an option with the unusual name \"<literal>::</literal>\" which acts "
+"like every other option with a name. This introduces many problems; for one "
+"thing, users who write multiple lines in this <emphasis>wrong</emphasis> "
+"syntax in the hope of appending to a list will achieve the opposite, as only "
+"the last assignment for this option \"<literal>::</literal>\" will be used. "
+"Future versions of APT will raise errors and stop working if they encounter "
+"this misuse, so please correct such statements now while APT doesn't "
+"explicitly complain about them."
msgstr ""
"Note que você apenas pode usar :: para acrescentar um item por linha a uma "
"lista e não o deve usar em combinação com a sintaxe scope. (A sintaxe scope "
"declarações agora enquanto o APT não se queixa explicitamente acerca delas."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:145
+#: apt.conf.5.xml:154
msgid "The APT Group"
msgstr "O Grupo APT"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:146
+#: apt.conf.5.xml:155
msgid ""
"This group of options controls general APT behavior as well as holding the "
"options for all of the tools."
"as opções para todas as ferramentas."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:151
+#: apt.conf.5.xml:160
msgid ""
"System Architecture; sets the architecture to use when fetching files and "
"parsing package lists. The internal default is the architecture apt was "
"qual o APT foi compilado."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:157
+#: apt.conf.5.xml:167
msgid ""
-"All Architectures the system supports. Processors implementing the "
-"<literal>amd64</literal> (also called <literal>x86-64</literal>) instruction "
-"set are e.g. also able to execute binaries compiled for the <literal>i386</"
-"literal> (<literal>x86</literal>) instruction set; This list is use when "
-"fetching files and parsing package lists. The internal default is always the "
-"native architecture (<literal>APT::Architecture</literal>) and all foreign "
-"architectures it can retrieve by calling <command>dpkg --print-foreign-"
-"architectures</command>."
+"All Architectures the system supports. For instance, CPUs implementing the "
+"<literal>amd64</literal> (also called <literal>x86-64</literal>) "
+"instruction set are also able to execute binaries compiled for the "
+"<literal>i386</literal> (<literal>x86</literal>) instruction set. This list "
+"is used when fetching files and parsing package lists. The initial default "
+"is always the system's native architecture (<literal>APT::Architecture</"
+"literal>), and foreign architectures are added to the default list when they "
+"are registered via <command>dpkg --add-architecture</command>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:167
+#: apt.conf.5.xml:180
msgid ""
-"Default release to install packages from if more than one version available. "
-"Contains release name, codename or release version. Examples: 'stable', "
-"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', "
-"'5.0*'. See also &apt-preferences;."
+"Default release to install packages from if more than one version is "
+"available. Contains release name, codename or release version. Examples: "
+"'stable', 'testing', 'unstable', '&stable-codename;', '&testing-codename;', "
+"'4.0', '5.0*'. See also &apt-preferences;."
msgstr ""
"Lançamento predefinido de onde instalar pacotes se existir mais de uma "
"versão disponível. Contém o nome do lançamento, nome de código ou versão de "
"'&testing-codename;', '4.0', '5.0*'. Veja também &apt-preferences;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:173
+#: apt.conf.5.xml:186
msgid ""
-"Ignore Held packages; This global option causes the problem resolver to "
+"Ignore held packages; this global option causes the problem resolver to "
"ignore held packages in its decision making."
msgstr ""
"Ignore Held packages; Esta opção global faz com que ao resolver problemas, "
"os pacotes segurados sejam ignorados na sua decisão de marcação."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:178
+#: apt.conf.5.xml:191
msgid ""
"Defaults to on. When turned on the autoclean feature will remove any "
"packages which can no longer be downloaded from the cache. If turned off "
"directo de os reinstalar."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:185
-msgid ""
-"Defaults to on which will cause APT to install essential and important "
-"packages as fast as possible in the install/upgrade operation. This is done "
-"to limit the effect of a failing &dpkg; call: If this option is disabled APT "
-"does treat an important package in the same way as an extra package: Between "
-"the unpacking of the important package A and his configuration can then be "
-"many other unpack or configuration calls, e.g. for package B which has no "
-"relation to A, but causes the dpkg call to fail (e.g. because maintainer "
-"script of package B generates an error) which results in a system state in "
-"which package A is unpacked but unconfigured - each package depending on A "
-"is now no longer guaranteed to work as their dependency on A is not longer "
-"satisfied. The immediate configuration marker is also applied to all "
-"dependencies which can generate a problem if the dependencies e.g. form a "
-"circle as a dependency with the immediate flag is comparable with a Pre-"
-"Dependency. So in theory it is possible that APT encounters a situation in "
-"which it is unable to perform immediate configuration, errors out and refers "
-"to this option so the user can deactivate the immediate configuration "
-"temporarily to be able to perform an install/upgrade again. Note the use of "
-"the word \"theory\" here as this problem was only encountered by now in real "
-"world a few times in non-stable distribution versions and was caused by "
-"wrong dependencies of the package in question or by a system in an already "
-"broken state, so you should not blindly disable this option as the mentioned "
-"scenario above is not the only problem immediate configuration can help to "
-"prevent in the first place. Before a big operation like <literal>dist-"
-"upgrade</literal> is run with this option disabled it should be tried to "
-"explicitly <literal>install</literal> the package APT is unable to configure "
-"immediately, but please make sure to report your problem also to your "
-"distribution and to the APT team with the buglink below so they can work on "
-"improving or correcting the upgrade process."
-msgstr ""
-"A predefinição é ligado o que irá fazer com que o APT instale pacotes "
-"essenciais e importantes o mais rápido possível na operação de instalar/"
-"actualizar. Isto é feito para limitar o efeito de uma chamada falhada do "
-"&dpkg;. Se esta opção for desactivada, o APT trata um pacote importante do "
-"mesmo modo que um pacote extra: Entre o desempacotamento do pacote "
-"importante A e a sua configuração podem acontecer muitas outras chamadas de "
-"desempacotamento e configuração, exemplo, para o pacote B que não tem "
-"nenhuma relação com A, mas causa uma falha na chamada ao dpkg (ex, porque o "
-"script do responsável do pacote B gera um erro) o qual resulta num estado do "
-"sistema em que o pacote A está desempacotado mas ainda não configurado - já "
-"não se garante o funcionamento de cada pacote que depende de A porque a sua "
-"dependência já não está satisfeita. O marcador de configuração imediata é "
-"também aplicado a todas as dependências que possam gerar um problema se as "
-"dependências, ex, formam um círculo como uma dependência com a marca de "
-"imediato a ser comparável com uma Pré-Dependência. Portanto, em teoria, é "
-"possível que o APT encontre uma situação na qual é incapaz de executar "
-"configuração imediata, entre em erro e refira esta opção para que o "
-"utilizador possa desactivar temporariamente a configuração imediata para ser "
-"capaz de executar uma instalação/actualização outra vez. Note o uso da "
-"palavra \"teoria\" aqui pois este problema foi poucas vezes encontrado até "
-"agora no mundo real em versões de distribuição não-estáveis e causados por "
-"dependências erradas do pacote em questão ou por um sistema já num estado "
-"corrompido, portanto você não deve desactivar esta opção às cegas porque, em "
-"primeiro lugar, o cenário mencionado acima não é o único problema que a "
-"configuração imediata pode ajudar a prevenir. Antes de uma grande operação "
-"como <literal>dist-upgrade</literal> ser corrida com esta opção desactivada, "
-"deve ser tentado primeiro fazer um <literal>install</literal> explicito ao "
-"pacote que o APT é incapaz de configurar imediatamente, mas por favor "
-"certifique-se de também relatar o seu problema à sua distribuição e à equipa "
-"do APT com o link de bug abaixo para que possam trabalhar na melhoria ou "
-"correcção do processo de actualização."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:208
-msgid ""
-"Never Enable this option unless you -really- know what you are doing. It "
-"permits APT to temporarily remove an essential package to break a Conflicts/"
-"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH "
-"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the "
-"essential packages are not tar, gzip, libc, dpkg, bash or anything that "
-"those packages depend on."
+#: apt.conf.5.xml:199
+msgid ""
+"Defaults to on, which will cause APT to install essential and important "
+"packages as soon as possible in an install/upgrade operation, in order to "
+"limit the effect of a failing &dpkg; call. If this option is disabled, APT "
+"treats an important package in the same way as an extra package: between the "
+"unpacking of the package A and its configuration there can be many other "
+"unpack or configuration calls for other unrelated packages B, C etc. If "
+"these cause the &dpkg; call to fail (e.g. because package B's maintainer "
+"scripts generate an error), this results in a system state in which package "
+"A is unpacked but unconfigured - so any package depending on A is now no "
+"longer guaranteed to work, as its dependency on A is no longer satisfied."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:211
+msgid ""
+"The immediate configuration marker is also applied in the potentially "
+"problematic case of circular dependencies, since a dependency with the "
+"immediate flag is equivalent to a Pre-Dependency. In theory this allows APT "
+"to recognise a situation in which it is unable to perform immediate "
+"configuration, abort, and suggest to the user that the option should be "
+"temporarily deactivated in order to allow the operation to proceed. Note "
+"the use of the word \"theory\" here; in the real world this problem has "
+"rarely been encountered, in non-stable distribution versions, and was caused "
+"by wrong dependencies of the package in question or by a system in an "
+"already broken state; so you should not blindly disable this option, as the "
+"scenario mentioned above is not the only problem it can help to prevent in "
+"the first place."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:224
+msgid ""
+"Before a big operation like <literal>dist-upgrade</literal> is run with this "
+"option disabled you should try to explicitly <literal>install</literal> the "
+"package APT is unable to configure immediately; but please make sure you "
+"also report your problem to your distribution and to the APT team with the "
+"buglink below, so they can work on improving or correcting the upgrade "
+"process."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:235
+#, fuzzy
+#| msgid ""
+#| "Never Enable this option unless you -really- know what you are doing. It "
+#| "permits APT to temporarily remove an essential package to break a "
+#| "Conflicts/Conflicts or Conflicts/Pre-Depend loop between two essential "
+#| "packages. SUCH A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option "
+#| "will work if the essential packages are not tar, gzip, libc, dpkg, bash "
+#| "or anything that those packages depend on."
+msgid ""
+"Never enable this option unless you <emphasis>really</emphasis> know what "
+"you are doing. It permits APT to temporarily remove an essential package to "
+"break a Conflicts/Conflicts or Conflicts/Pre-Depends loop between two "
+"essential packages. <emphasis>Such a loop should never exist and is a grave "
+"bug</emphasis>. This option will work if the essential packages are not "
+"<command>tar</command>, <command>gzip</command>, <command>libc</command>, "
+"<command>dpkg</command>, <command>dash</command> or anything that those "
+"packages depend on."
msgstr ""
"Nunca Active esta opção a menos que saiba -realmente- o que está a fazer. "
"Permite ao APT remover temporariamente um pacote essencial para interromper "
"tar, gzip, libc, dpkg, bash ou qualquer coisa de que estes dependem."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:217
+#: apt.conf.5.xml:247
#, fuzzy
#| msgid ""
#| "APT uses since version 0.7.26 a resizable memory mapped cache file to "
#| "automatic grow of the cache is disabled."
msgid ""
"APT uses since version 0.7.26 a resizable memory mapped cache file to store "
-"the 'available' information. <literal>Cache-Start</literal> acts as a hint "
-"to which size the Cache will grow and is therefore the amount of memory APT "
+"the available information. <literal>Cache-Start</literal> acts as a hint of "
+"the size the cache will grow to, and is therefore the amount of memory APT "
"will request at startup. The default value is 20971520 bytes (~20 MB). Note "
-"that this amount of space needs to be available for APT otherwise it will "
+"that this amount of space needs to be available for APT; otherwise it will "
"likely fail ungracefully, so for memory restricted devices this value should "
"be lowered while on systems with a lot of configured sources it should be "
"increased. <literal>Cache-Grow</literal> defines in bytes with the default "
-"of 1048576 (~1 MB) how much the Cache size will be increased in the event "
-"the space defined by <literal>Cache-Start</literal> is not enough. These "
+"of 1048576 (~1 MB) how much the cache size will be increased in the event "
+"the space defined by <literal>Cache-Start</literal> is not enough. This "
"value will be applied again and again until either the cache is big enough "
"to store all information or the size of the cache reaches the <literal>Cache-"
"Limit</literal>. The default of <literal>Cache-Limit</literal> is 0 which "
"stands for no limit. If <literal>Cache-Grow</literal> is set to 0 the "
-"automatic grow of the cache is disabled."
+"automatic growth of the cache is disabled."
msgstr ""
"O APT usa desde a versão 0.7.26 um ficheiro de cache com mapa de memória de "
"tamanho ajustável para armazenar a informação disponível. <literal>Cache-"
"da cache é desactivado."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:233
-msgid "Defines which package(s) are considered essential build dependencies."
+#: apt.conf.5.xml:263
+#, fuzzy
+#| msgid ""
+#| "Defines which package(s) are considered essential build dependencies."
+msgid "Defines which packages are considered essential build dependencies."
msgstr ""
"Define quais pacote(s) são considerados dependências essenciais de "
"compilação."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:237
+#: apt.conf.5.xml:267
msgid ""
-"The Get subsection controls the &apt-get; tool, please see its documentation "
+"The Get subsection controls the &apt-get; tool; please see its documentation "
"for more information about the options here."
msgstr ""
"A subsecção Get controla a ferramenta &apt-get;, por favor veja a sua "
"documentação para mais informação acerca das opções daqui."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:242
+#: apt.conf.5.xml:272
msgid ""
-"The Cache subsection controls the &apt-cache; tool, please see its "
+"The Cache subsection controls the &apt-cache; tool; please see its "
"documentation for more information about the options here."
msgstr ""
"A subsecção Cache controla a ferramenta &apt-cache;, por favor veja a sua "
"documentação para mais informação acerca das opções daqui."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:247
+#: apt.conf.5.xml:277
msgid ""
-"The CDROM subsection controls the &apt-cdrom; tool, please see its "
+"The CDROM subsection controls the &apt-cdrom; tool; please see its "
"documentation for more information about the options here."
msgstr ""
"A subsecção CDROM controla a ferramenta &apt-cdrom;, por favor veja a sua "
"documentação para mais informação acerca das opções de aqui."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:253
+#: apt.conf.5.xml:283
msgid "The Acquire Group"
msgstr "O Grupo Acquire"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:254
+#: apt.conf.5.xml:284
#, fuzzy
#| msgid ""
#| "The <literal>Acquire</literal> group of options controls the download of "
#| "\"0\"/>"
msgid ""
"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers."
+"packages as well as the various \"acquire methods\" responsible for the "
+"download itself (see also &sources-list;)."
msgstr ""
"O grupo de opções <literal>Acquire</literal> controla a descarga de pacotes "
"e os manipuladores de URI. <placeholder type=\"variablelist\" id=\"0\"/>"
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:259
-msgid ""
-"Security related option defaulting to true as an expiring validation for a "
-"Release file prevents longtime replay attacks and can e.g. also help users "
-"to identify no longer updated mirrors - but the feature depends on the "
-"correctness of the time on the user system. Archive maintainers are "
-"encouraged to create Release files with the <literal>Valid-Until</literal> "
-"header, but if they don't or a stricter value is volitional the following "
-"<literal>Max-ValidTime</literal> option can be used."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:291
+#, fuzzy
+#| msgid ""
+#| "Security related option defaulting to true as an expiring validation for "
+#| "a Release file prevents longtime replay attacks and can e.g. also help "
+#| "users to identify no longer updated mirrors - but the feature depends on "
+#| "the correctness of the time on the user system. Archive maintainers are "
+#| "encouraged to create Release files with the <literal>Valid-Until</"
+#| "literal> header, but if they don't or a stricter value is volitional the "
+#| "following <literal>Max-ValidTime</literal> option can be used."
+msgid ""
+"Security related option defaulting to true, as giving a Release file's "
+"validation an expiration date prevents replay attacks over a long timescale, "
+"and can also for example help users to identify mirrors that are no longer "
+"updated - but the feature depends on the correctness of the clock on the "
+"user system. Archive maintainers are encouraged to create Release files with "
+"the <literal>Valid-Until</literal> header, but if they don't or a stricter "
+"value is desired the <literal>Max-ValidTime</literal> option below can be "
+"used."
msgstr ""
"Opção relacionada com segurança com predefinição a 'verdadeiro' como uma "
"validação expirada para um ficheiro Release previne ataques repetidos "
"preferir-se um valor mais rigoroso pode-se usar a opção <literal>Max-"
"ValidTime</literal> seguinte."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:270
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:304
#, fuzzy
#| msgid ""
#| "Seconds the Release file should be considered valid after it was created. "
#| "of the two. Archive specific settings can be made by appending the label "
#| "of the archive to the option name."
msgid ""
-"Seconds the Release file should be considered valid after it was created "
-"(indicated by the <literal>Date</literal> header). If the Release file "
-"itself includes a <literal>Valid-Until</literal> header the earlier date of "
-"the two is used as the expiration date. The default value is <literal>0</"
-"literal> which stands for \"for ever valid\". Archive specific settings can "
-"be made by appending the label of the archive to the option name."
+"Maximum time (in seconds) after its creation (as indicated by the "
+"<literal>Date</literal> header) that the <filename>Release</filename> file "
+"should be considered valid. If the Release file itself includes a "
+"<literal>Valid-Until</literal> header the earlier date of the two is used as "
+"the expiration date. The default value is <literal>0</literal> which stands "
+"for \"valid forever\". Archive specific settings can be made by appending "
+"the label of the archive to the option name."
msgstr ""
"Segundos em que o ficheiro Release deve considerado válido após ser criado. "
"A predefinição é \"para sempre\" (0) se o ficheiro Release do arquivo não "
"Definições específicas do Arquivo podem ser feitas ao adicionar a etiqueta "
"do arquivo ao nome da opção. "
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:281
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:316
#, fuzzy
#| msgid ""
#| "Seconds the Release file should be considered valid after it was created. "
#| "of the two. Archive specific settings can be made by appending the label "
#| "of the archive to the option name."
msgid ""
-"Minimum of seconds the Release file should be considered valid after it was "
-"created (indicated by the <literal>Date</literal> header). Use this if you "
-"need to use a seldomly updated (local) mirror of a more regular updated "
-"archive with a <literal>Valid-Until</literal> header instead of completely "
-"disabling the expiration date checking. Archive specific settings can and "
-"should be used by appending the label of the archive to the option name."
+"Minimum time (in seconds) after its creation (as indicated by the "
+"<literal>Date</literal> header) that the <filename>Release</filename> file "
+"should be considered valid. Use this if you need to use a seldom updated "
+"(local) mirror of a more frequently updated archive with a <literal>Valid-"
+"Until</literal> header instead of completely disabling the expiration date "
+"checking. Archive specific settings can and should be used by appending the "
+"label of the archive to the option name."
msgstr ""
"Segundos em que o ficheiro Release deve considerado válido após ser criado. "
"A predefinição é \"para sempre\" (0) se o ficheiro Release do arquivo não "
"Definições específicas do Arquivo podem ser feitas ao adicionar a etiqueta "
"do arquivo ao nome da opção. "
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:292
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:328
+#, fuzzy
+#| msgid ""
+#| "Try to download deltas called <literal>PDiffs</literal> for Packages or "
+#| "Sources files instead of downloading whole ones. True by default."
msgid ""
-"Try to download deltas called <literal>PDiffs</literal> for Packages or "
-"Sources files instead of downloading whole ones. True by default."
+"Try to download deltas called <literal>PDiffs</literal> for indexes (like "
+"<filename>Packages</filename> files) instead of downloading whole ones. True "
+"by default."
msgstr ""
"Tenta descarregar deltas chamados <literal>PDiffs</literal> para Pacotes ou "
"ficheiros Fonte em vez de os descarregar por inteiro. Verdadeiro por "
"predefinição."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:295
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:331
#, fuzzy
#| msgid ""
#| "Two sub-options to limit the use of PDiffs are also available: With "
#| "to the size of the targeted file. If one of these limits is exceeded the "
#| "complete file is downloaded instead of the patches."
msgid ""
-"Two sub-options to limit the use of PDiffs are also available: With "
-"<literal>FileLimit</literal> can be specified how many PDiff files are "
-"downloaded at most to update a file. <literal>SizeLimit</literal> on the "
-"other hand is the maximum percentage of the size of all patches compared to "
-"the size of the targeted file. If one of these limits is exceeded the "
-"complete file is downloaded instead of the patches."
+"Two sub-options to limit the use of PDiffs are also available: "
+"<literal>FileLimit</literal> can be used to specify a maximum number of "
+"PDiff files should be downloaded to update a file. <literal>SizeLimit</"
+"literal> on the other hand is the maximum percentage of the size of all "
+"patches compared to the size of the targeted file. If one of these limits is "
+"exceeded the complete file is downloaded instead of the patches."
msgstr ""
"Estão também disponíveis duas sub-opções para limitar o uso de PDiffs: Com "
"<literal>FileLimit</literal> pode ser especificado quantos ficheiros PDiff "
"as patches comparadas com o tamanho do ficheiro de destino. Se um destes "
"limites for excedido, é descarregado o ficheiro completo em vez das patches."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:305
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:341
msgid ""
"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
"literal> or <literal>access</literal> which determines how APT parallelizes "
"ligação por máquina destino, <literal>access</literal> significa que será "
"aberta uma ligação por tipo de URI."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:313
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:349
msgid ""
"Number of retries to perform. If this is non-zero APT will retry failed "
"files the given number of times."
"Número de tentativas a executar. Se isto for diferente de zero o APT irá "
"tentar, no número fornecido de vezes, obter ficheiros falhados."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:318
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:354
msgid ""
"Use symlinks for source archives. If set to true then source archives will "
"be symlinked when possible instead of copying. True is the default."
"os arquivos fonte serão links simbólicos, quando possível, em vez de cópias. "
"A predefinição é verdadeiro."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:323
-msgid ""
-"HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
-"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per "
-"host proxies can also be specified by using the form <literal>http::Proxy::"
-"<host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>http_proxy</envar> environment variable will be used."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:359
+#, fuzzy
+#| msgid ""
+#| "HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
+#| "standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. "
+#| "Per host proxies can also be specified by using the form <literal>http::"
+#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</"
+#| "literal> meaning to use no proxies. If no one of the above settings is "
+#| "specified, <envar>http_proxy</envar> environment variable will be used."
+msgid ""
+"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. "
+"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</"
+"literal>. Per host proxies can also be specified by using the form "
+"<literal>http::Proxy::<host></literal> with the special keyword "
+"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
+"settings is specified, <envar>http_proxy</envar> environment variable will "
+"be used."
msgstr ""
"HTTP URIs; http::Proxy é o proxy http predefinido a usar. Está no formato "
"standard de <literal>http://[[user][:pass]@]host[:port]/</literal>. Também "
"literal> que significa não usar proxies. Se nenhuma das definições acima for "
"especificada, será usada a variável de ambiente <envar>http_proxy</envar>."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:331
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:367
+#, fuzzy
+#| msgid ""
+#| "Three settings are provided for cache control with HTTP/1.1 compliant "
+#| "proxy caches. <literal>No-Cache</literal> tells the proxy to not use its "
+#| "cached response under any circumstances, <literal>Max-Age</literal> is "
+#| "sent only for index files and tells the cache to refresh its object if it "
+#| "is older than the given number of seconds. Debian updates its index files "
+#| "daily so the default is 1 day. <literal>No-Store</literal> specifies that "
+#| "the cache should never store this request, it is only set for archive "
+#| "files. This may be useful to prevent polluting a proxy cache with very "
+#| "large .deb files. Note: Squid 2.0.2 does not support any of these options."
msgid ""
"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
-"caches. <literal>No-Cache</literal> tells the proxy to not use its cached "
-"response under any circumstances, <literal>Max-Age</literal> is sent only "
-"for index files and tells the cache to refresh its object if it is older "
-"than the given number of seconds. Debian updates its index files daily so "
-"the default is 1 day. <literal>No-Store</literal> specifies that the cache "
-"should never store this request, it is only set for archive files. This may "
-"be useful to prevent polluting a proxy cache with very large .deb files. "
-"Note: Squid 2.0.2 does not support any of these options."
+"caches. <literal>No-Cache</literal> tells the proxy not to use its cached "
+"response under any circumstances. <literal>Max-Age</literal> sets the "
+"allowed maximum age (in seconds) of an index file in the cache of the "
+"proxy. <literal>No-Store</literal> specifies that the proxy should not "
+"store the requested archive files in its cache, which can be used to prevent "
+"the proxy from polluting its cache with (big) .deb files."
msgstr ""
"São disponibilizadas três definições para controle de cache como caches de "
"proxy compatíveis com HTTP/1.1. <literal>No-Cache</literal> diz ao proxy "
"cache proxy com ficheiros .deb muito grandes. Nota: o Squid 2.0.2 não "
"suporta nenhuma destas opções."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:341 apt.conf.5.xml:407
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:377 apt.conf.5.xml:449
+#, fuzzy
+#| msgid ""
+#| "The option <literal>timeout</literal> sets the timeout timer used by the "
+#| "method; this applies to all things including connection timeout and data "
+#| "timeout."
msgid ""
"The option <literal>timeout</literal> sets the timeout timer used by the "
-"method, this applies to all things including connection timeout and data "
-"timeout."
+"method; this value applies to the connection as well as the data timeout."
msgstr ""
"A opção <literal>timeout</literal> define o tempo limite usado por este "
"método, isto aplica-se a todas as coisas incluindo tempos limite de ligação "
"e tempos limite de dados."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:344
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:380
msgid ""
"The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to "
-"enabled HTTP pipeling (RFC 2616 section 8.1.2.2) which can be beneficial e."
-"g. on high-latency connections. It specifies how many requests are send in a "
+"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e."
+"g. on high-latency connections. It specifies how many requests are sent in a "
"pipeline. Previous APT versions had a default of 10 for this setting, but "
"the default value is now 0 (= disabled) to avoid problems with the ever-"
"growing amount of webservers and proxies which choose to not conform to the "
"HTTP/1.1 specification."
msgstr ""
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:351
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:387
msgid ""
-"<literal>Acquire::http::AllowRedirect</literal> controls if APT will follow "
-"redirects, which is enabled by default."
+"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will "
+"follow redirects, which is enabled by default."
msgstr ""
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:354
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:390
+#, fuzzy
+#| msgid ""
+#| "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
+#| "literal> which accepts integer values in kilobytes. The default value is "
+#| "0 which deactivates the limit and tries uses as much as possible of the "
+#| "bandwidth (Note that this option implicit deactivates the download from "
+#| "multiple servers at the same time.)"
msgid ""
"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
-"literal> which accepts integer values in kilobyte. The default value is 0 "
-"which deactivates the limit and tries uses as much as possible of the "
-"bandwidth (Note that this option implicit deactivates the download from "
-"multiple servers at the same time.)"
+"literal> which accepts integer values in kilobytes. The default value is 0 "
+"which deactivates the limit and tries to use all available bandwidth (note "
+"that this option implicitly disables downloading from multiple servers at "
+"the same time.)"
msgstr ""
"A largura de banda usada pode ser limitada com <literal>Acquire::http::Dl-"
"Limit</literal> que aceita valores inteiros em kilobytes. O valor "
"largura de banda (Note que esta opção implícita desactiva a descarga de "
"múltiplos servidores ao mesmo tempo.)"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:359
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:395
msgid ""
"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
"User-Agent for the http download method as some proxies allow access for "
"alguns proxies apenas permitem acesso a clientes se o cliente usar um "
"identificador conhecido."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:366
-msgid ""
-"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
-"options are the same as for <literal>http</literal> method and will also "
-"default to the options from the <literal>http</literal> method if they are "
-"not explicitly set for https. <literal>Pipeline-Depth</literal> option is "
-"not supported yet."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:403
+#, fuzzy
+#| msgid ""
+#| "HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
+#| "options are the same as for <literal>http</literal> method and will also "
+#| "default to the options from the <literal>http</literal> method if they "
+#| "are not explicitly set for https. <literal>Pipeline-Depth</literal> "
+#| "option is not supported yet."
+msgid ""
+"The <literal>Cache-control</literal>, <literal>Timeout</literal>, "
+"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and "
+"<literal>proxy</literal> options work for HTTPS URIs in the same way as for "
+"the <literal>http</literal> method, and default to the same values if they "
+"are not explicitly set. The <literal>Pipeline-Depth</literal> option is not "
+"yet supported."
msgstr ""
"HTTPS URIs. as opções Cache-control, Timeout, AllowRedirect, Dl-Limit e "
"proxy são as mesmas para o método <literal>http</literal> e irá também usar "
"explicitamente definidas para https. A opção <literal>Pipeline-Depth</"
"literal> ainda não é suportada."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:372
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:411
+#, fuzzy
+#| msgid ""
+#| "<literal>CaInfo</literal> suboption specifies place of file that holds "
+#| "info about trusted certificates. <literal><host>::CaInfo</literal> "
+#| "is the corresponding per-host option. <literal>Verify-Peer</literal> "
+#| "boolean suboption determines whether verify server's host certificate "
+#| "against trusted certificates or not. <literal><host>::Verify-Peer</"
+#| "literal> is the corresponding per-host option. <literal>Verify-Host</"
+#| "literal> boolean suboption determines whether verify server's hostname or "
+#| "not. <literal><host>::Verify-Host</literal> is the corresponding "
+#| "per-host option. <literal>SslCert</literal> determines what certificate "
+#| "to use for client authentication. <literal><host>::SslCert</"
+#| "literal> is the corresponding per-host option. <literal>SslKey</literal> "
+#| "determines what private key to use for client authentication. "
+#| "<literal><host>::SslKey</literal> is the corresponding per-host "
+#| "option. <literal>SslForceVersion</literal> overrides default SSL version "
+#| "to use. Can contain 'TLSv1' or 'SSLv3' string. <literal><host>::"
+#| "SslForceVersion</literal> is the corresponding per-host option."
msgid ""
"<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates. <literal><host>::CaInfo</literal> is "
+"about trusted certificates. <literal><host>::CaInfo</literal> is the "
"corresponding per-host option. <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not. <literal><host>::Verify-Peer</literal> "
-"is corresponding per-host option. <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not. <literal><"
-"host>::Verify-Host</literal> is corresponding per-host option. "
-"<literal>SslCert</literal> determines what certificate to use for client "
-"authentication. <literal><host>::SslCert</literal> is corresponding "
-"per-host option. <literal>SslKey</literal> determines what private key to "
-"use for client authentication. <literal><host>::SslKey</literal> is "
-"corresponding per-host option. <literal>SslForceVersion</literal> overrides "
-"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. "
-"<literal><host>::SslForceVersion</literal> is corresponding per-host "
-"option."
+"suboption determines whether or not the server's host certificate should be "
+"verified against trusted certificates. <literal><host>::Verify-Peer</"
+"literal> is the corresponding per-host option. <literal>Verify-Host</"
+"literal> boolean suboption determines whether or not the server's hostname "
+"should be verified. <literal><host>::Verify-Host</literal> is the "
+"corresponding per-host option. <literal>SslCert</literal> determines what "
+"certificate to use for client authentication. <literal><host>::"
+"SslCert</literal> is the corresponding per-host option. <literal>SslKey</"
+"literal> determines what private key to use for client authentication. "
+"<literal><host>::SslKey</literal> is the corresponding per-host "
+"option. <literal>SslForceVersion</literal> overrides default SSL version to "
+"use. It can contain either of the strings '<literal>TLSv1</literal>' or "
+"'<literal>SSLv3</literal>'. <literal><host>::SslForceVersion</"
+"literal> is the corresponding per-host option."
msgstr ""
"A sub-opção <literal>CaInfo</literal> especifica o lugar do ficheiro que "
"contém informação acerca de certificados de confiança. <literal><"
"predefinida a usar. Pode conter strings 'TLSv1' ou 'SSLv3'. <literal><"
"host>::SslForceVersion</literal> é a opção po máquina correspondente."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:391
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form <literal>ftp::Proxy::<"
-"host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp "
-"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in "
-"the configuration file. This entry specifies the commands to send to tell "
-"the proxy server what to connect to. Please see &configureindex; for an "
-"example of how to do this. The substitution variables available are <literal>"
-"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>"
-"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</"
-"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's "
-"respective URI component."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:432
+#, fuzzy
+#| msgid ""
+#| "FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the "
+#| "standard form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. "
+#| "Per host proxies can also be specified by using the form <literal>ftp::"
+#| "Proxy::<host></literal> with the special keyword <literal>DIRECT</"
+#| "literal> meaning to use no proxies. If no one of the above settings is "
+#| "specified, <envar>ftp_proxy</envar> environment variable will be used. To "
+#| "use a ftp proxy you will have to set the <literal>ftp::ProxyLogin</"
+#| "literal> script in the configuration file. This entry specifies the "
+#| "commands to send to tell the proxy server what to connect to. Please see "
+#| "&configureindex; for an example of how to do this. The substitution "
+#| "variables available are <literal>$(PROXY_USER)</literal> <literal>"
+#| "$(PROXY_PASS)</literal> <literal>$(SITE_USER)</literal> <literal>"
+#| "$(SITE_PASS)</literal> <literal>$(SITE)</literal> and <literal>"
+#| "$(SITE_PORT)</literal> Each is taken from it's respective URI component."
+msgid ""
+"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. "
+"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</"
+"literal>. Per host proxies can also be specified by using the form "
+"<literal>ftp::Proxy::<host></literal> with the special keyword "
+"<literal>DIRECT</literal> meaning to use no proxies. If no one of the above "
+"settings is specified, <envar>ftp_proxy</envar> environment variable will be "
+"used. To use an FTP proxy you will have to set the <literal>ftp::ProxyLogin</"
+"literal> script in the configuration file. This entry specifies the commands "
+"to send to tell the proxy server what to connect to. Please see "
+"&configureindex; for an example of how to do this. The substitution "
+"variables representing the corresponding URI component are <literal>"
+"$(PROXY_USER)</literal>, <literal>$(PROXY_PASS)</literal>, <literal>"
+"$(SITE_USER)</literal>, <literal>$(SITE_PASS)</literal>, <literal>$(SITE)</"
+"literal> and <literal>$(SITE_PORT)</literal>."
msgstr ""
"URIs FTP; ftp::Proxy é o proxy ftp predefinido a usar. Está no formato "
"standard de <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Os "
"<literal>$(SITE_PASS)</literal> <literal>$(SITE)</literal> e <literal>"
"$(SITE_PORT)</literal>. Cada uma é tirada do seu componente URI respectivo."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:410
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:452
+#, fuzzy
+#| msgid ""
+#| "Several settings are provided to control passive mode. Generally it is "
+#| "safe to leave passive mode on; it works in nearly every environment. "
+#| "However, some situations require that passive mode be disabled and port "
+#| "mode FTP used instead. This can be done globally, for connections that go "
+#| "through a proxy or for a specific host (See the sample config file for "
+#| "examples)."
msgid ""
"Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment. However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
+"to leave passive mode on; it works in nearly every environment. However, "
+"some situations require that passive mode be disabled and port mode FTP used "
+"instead. This can be done globally or for connections that go through a "
+"proxy or for a specific host (see the sample config file for examples)."
msgstr ""
"São disponibilizadas várias definições para controlar o modo passivo. "
"Geralmente é seguro deixar o modo passivo ligado, funciona em quase todos "
"globalmente, para ligações que passam por um proxy ou para uma máquina "
"específica (Veja a amostra de ficheiro de configuração para exemplos)."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:417
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:459
msgid ""
"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
-"envar> environment variable to a http url - see the discussion of the http "
+"envar> environment variable to an HTTP URL - see the discussion of the http "
"method above for syntax. You cannot set this in the configuration file and "
"it is not recommended to use FTP over HTTP due to its low efficiency."
msgstr ""
"É possível usar proxy FTP sobre HTTP ao definir a variável de ambiente "
-"<envar>ftp_proxy</envar> para um url http - veja a discussão do método http "
+"<envar>ftp_proxy</envar> para um URL HTTP - veja a discussão do método http "
"em cima para a sintaxe. Você não pode definir isto no ficheiro de "
"configuração e não é recomendado usar FTP sobre HTTP devido à sua baixa "
"eficiência."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:422
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:464
msgid ""
"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
"controle for IPv6. Definir isto para verdadeiro força o seu uso mesmo em "
"ligações IPv4. Note que a maioria dos servidores FTP não suporta RFC2428."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:435
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
+#: apt.conf.5.xml:478
#, no-wrap
msgid "/cdrom/::Mount \"foo\";"
msgstr "/cdrom/::Mount \"foo\";"
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:430
-msgid ""
-"CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CD-ROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:473
+#, fuzzy
+#| msgid ""
+#| "CD-ROM URIs; the only setting for CD-ROM URIs is the mount point, "
+#| "<literal>cdrom::Mount</literal> which must be the mount point for the CD-"
+#| "ROM drive as specified in <filename>/etc/fstab</filename>. It is possible "
+#| "to provide alternate mount and unmount commands if your mount point "
+#| "cannot be listed in the fstab (such as an SMB mount and old mount "
+#| "packages). The syntax is to put <placeholder type=\"literallayout\" id="
+#| "\"0\"/> within the cdrom block. It is important to have the trailing "
+#| "slash. Unmount commands can be specified using UMount."
+msgid ""
+"For URIs using the <literal>cdrom</literal> method, the only configurable "
+"option is the mount point, <literal>cdrom::Mount</literal>, which must be "
+"the mount point for the CD-ROM (or DVD, or whatever) drive as specified in "
+"<filename>/etc/fstab</filename>. It is possible to provide alternate mount "
+"and unmount commands if your mount point cannot be listed in the fstab. The "
"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
+"<literal>cdrom</literal> block. It is important to have the trailing slash. "
+"Unmount commands can be specified using UMount."
msgstr ""
"CD-ROM URIs; a única definição para URIs de CD-ROM é o ponto de montagem, "
"<literal>cdrom::Mount</literal> que deve ser o ponto de montagem para a "
"\" id=\"0\"/> dentro do bloco cdrom. É importante ter a barra final. "
"Comandos para desmontar podem ser especificados usando UMount."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:441
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:486
+#, fuzzy
+#| msgid ""
+#| "GPGV URIs; the only option for GPGV URIs is the option to pass additional "
+#| "parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
+#| "passed to gpgv."
msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
+"For GPGV URIs the only configurable option is <literal>gpgv::Options</"
+"literal>, which passes additional parameters to gpgv."
msgstr ""
"GPGV URIs;a única opção para GPGV URIs é a opção para passar parâmetros "
"adicionais ao gpgv. <literal>gpgv::Options</literal> Opções adicionais "
"passadas ao gpgv."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:452
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:497
#, no-wrap
msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
msgstr "Acquire::CompressionTypes::<replaceable>Extensão de Ficheiro</replaceable> \"<replaceable>Nome de método</replaceable>\";"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:447
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:492
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
+"compression formats. By default the acquire methods can decompress "
"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
+"command> compressed files; with this setting more formats can be added on "
"the fly or the used method can be changed. The syntax for this is: "
"<placeholder type=\"synopsis\" id=\"0\"/>"
msgstr ""
"podem ser adicionados na hora com esta definição ou o método usado pode ser "
"alterado. A sintaxe para isto é: <placeholder type=\"synopsis\" id=\"0\"/>"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:457
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:502
#, no-wrap
msgid "Acquire::CompressionTypes::Order:: \"gz\";"
msgstr "Acquire::CompressionTypes::Order:: \"gz\";"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:460
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
+#: apt.conf.5.xml:505
#, no-wrap
msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:453
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:498
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - not already added default "
+#| "types will be added at run time to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>. If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this <placeholder type=\"synopsis\" id="
+#| "\"1\"/> It is not needed to add <literal>bz2</literal> explicit to the "
+#| "list as it will be added automatic."
+msgid ""
+"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"
run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
+"in this list on error, so to prefer one over the other type simply add the "
+"preferred type first - default types not already added will be implicitly "
+"
appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
+"<command>bzip2</command> the configure setting should look like this: "
"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
+"<literal>bz2</literal> to the list explicitly as it will be added "
+"automatically."
msgstr ""
"Também o subgrupo <literal>Order</literal> pode ser usado para definir em "
"que ordem o sistema de aquisição irá tentar descarregar os ficheiros "
"\"1\"/>. Não é necessário adicionar explicitamente <literal>bz2</literal> à "
"lista pois será adicionado automaticamente."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:464
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
+#: apt.conf.5.xml:512
#, no-wrap
msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:462
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:507
#, fuzzy
#| msgid ""
#| "Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
#| "end of the list specified in the configuration files, but before the "
#| "default entries. To prefer a type in this case over the ones specified in "
#| "in the configuration files you can set the option direct - not in list "
-#| "style. This will not override the defined list, it will only prefix the "
+#| "style. This will not override the defined list; it will only prefix the "
#| "list with this type."
msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> Note "
-"also that list entries specified on the command line will be added at the "
-"end of the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in the "
-"configuration files you can set the option direct - not in list style. This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
+"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+"literal> will be checked at run time. If this option has been set, the "
+"method will only be used if this file exists; e.g. for the <literal>bzip2</"
+"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
+"\" id=\"0\"/> Note also that list entries specified on the command line will "
+"be added at the end of the list specified in the configuration files, but "
+"before the default entries. To prefer a type in this case over the ones "
+"specified in the configuration files you can set the option direct - not in "
+"list style. This will not override the defined list; it will only prefix "
+"the list with this type."
msgstr ""
"Note que em tempo de execução será verificado o <literal>Dir::Bin::"
"<replaceable>nome de método</replaceable></literal>: se esta definição "
"pode definir a opção directamente - não em estilo de lista. Isto não irá "
"sobrepor a lista definida, irá apenas prefixar a lista com este tipo."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:469
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:517
msgid ""
"The special type <literal>uncompressed</literal> can be used to give "
"uncompressed files a preference, but note that most archives don't provide "
"uncompressed files so this is mostly only useable for local mirrors."
msgstr ""
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:476
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:524
msgid ""
"When downloading <literal>gzip</literal> compressed indexes (Packages, "
"Sources, or Translations), keep them gzip compressed locally instead of "
"desempacotar. Isto poupa imenso espaço no disco à custa de mais pedidos à "
"CPU quando constrói as caches de pacotes locais. Falso por predefinição."
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:484
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:532
+#, fuzzy
+#| msgid ""
+#| "The Languages subsection controls which <filename>Translation</filename> "
+#| "files are downloaded and in which order APT tries to display the "
+#| "description-translations. APT will try to display the first available "
+#| "description in the language which is listed first. Languages can be "
+#| "defined with their short or long language codes. Note that not all "
+#| "archives provide <filename>Translation</filename> files for every "
+#| "Language - especially the long Languagecodes are rare, so please inform "
+#| "you which ones are available before you set here impossible values."
msgid ""
"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
+"files are downloaded and in which order APT tries to display the description-"
+"translations. APT will try to display the first available description in the "
+"language which is listed first. Languages can be defined with their short or "
+"long language codes. Note that not all archives provide "
+"<filename>Translation</filename> files for every language - the long "
+"language codes are especially rare."
msgstr ""
"A subsecção Languages controla quais ficheiros <filename>Translation</"
"filename> são descarregados e em que ordem o APT tenta mostrar as Traduções "
"raros, portanto por favor informe-se sobre os quais estão disponíveis antes "
"de definir aqui valores impossíveis."
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:500
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting>
+#: apt.conf.5.xml:549
#, no-wrap
msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
msgstr "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:490
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:537
+#, fuzzy
+#| msgid ""
+#| "The default list includes \"environment\" and \"en\". "
+#| "\"<literal>environment</literal>\" has a special meaning here: It will be "
+#| "replaced at runtime with the languagecodes extracted from the "
+#| "<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
+#| "that these codes are not included twice in the list. If "
+#| "<literal>LC_MESSAGES</literal> is set to \"C\" only the "
+#| "<filename>Translation-en</filename> file (if available) will be used. To "
+#| "force APT to use no Translation file use the setting <literal>Acquire::"
+#| "Languages=none</literal>. \"<literal>none</literal>\" is another special "
+#| "meaning code which will stop the search for a suitable "
+#| "<filename>Translation</filename> file. This can be used by the system "
+#| "administrator to let APT know that it should download also this files "
+#| "without actually use them if the environment doesn't specify this "
+#| "languages. So the following example configuration will result in the "
+#| "order \"en, de\" in an english and in \"de, en\" in a german "
+#| "localization. Note that \"fr\" is downloaded, but not used if APT is not "
+#| "used in a french localization, in such an environment the order would be "
+#| "\"fr, de, en\". <placeholder type=\"programlisting\" id=\"0\"/>"
msgid ""
"The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
+"\"<literal>environment</literal>\" has a special meaning here: it will be "
+"replaced at runtime with the language codes extracted from the "
"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
"that these codes are not included twice in the list. If "
"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
+"force APT to use no Translation file use the setting <literal>Acquire::"
"Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file. This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id="
-"\"0\"/>"
+"meaning code which will stop the search for a suitable "
+"<filename>Translation</filename> file. This tells APT to download these "
+"translations too, without actually using them unless the environment "
+"specifies the languages. So the following example configuration will result "
+"in the order \"en, de\" in an English locale or \"de, en\" in a German one. "
+"Note that \"fr\" is downloaded, but not used unless APT is used in a French "
+"locale (where the order would be \"fr, de, en\"). <placeholder type="
+"\"programlisting\" id=\"0\"/>"
msgstr ""
"A lista predefinida inclui \"environment\" e \"en\". \"<literal>environment</"
"literal>\" tem um significado especial aqui: será substituída em tempo de "
"APT não for usado num ambiente em francês, em tal ambiente a ordem deveria "
"ser \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0\"/>"
-#. type: Content of: <refentry><refsect1><
para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:501
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:550
msgid ""
"Note: To prevent problems resulting from APT being executed in different "
"environments (e.g. by different users or by other programs) all Translation "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:512
+#: apt.conf.5.xml:560
msgid "Directories"
msgstr "Directories"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:514
+#: apt.conf.5.xml:562
#, fuzzy
#| msgid ""
#| "The <literal>Dir::State</literal> section has directories that pertain to "
#| "local state information. <literal>lists</literal> is the directory to "
#| "place downloaded package lists in and <literal>status</literal> is the "
-#| "name of the dpkg status file. <literal>preferences</literal> is the name "
-#| "of the APT preferences file. <literal>Dir::State</literal> contains the "
-#| "default directory to prefix on all sub items if they do not start with "
-#| "<filename>/</filename> or <filename>./</filename>."
+#| "name of the &dpkg; status file. <literal>preferences</literal> is the "
+#| "name of the APT preferences file. <literal>Dir::State</literal> contains "
+#| "the default directory to prefix on all sub items if they do not start "
+#| "with <filename>/</filename> or <filename>./</filename>."
msgid ""
"The <literal>Dir::State</literal> section has directories that pertain to "
"local state information. <literal>lists</literal> is the directory to place "
"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
+"&dpkg; status file. <literal>preferences</literal> is the name of the APT "
"<filename>preferences</filename> file. <literal>Dir::State</literal> "
-"contains the default directory to prefix on all sub items if they do not "
+"contains the default directory to prefix on all sub-items if they do not "
"start with <filename>/</filename> or <filename>./</filename>."
msgstr ""
"A secção <literal>Dir::State</literal> tem directórios que pertencem à "
"informação de estado local. <literal>lists</literal> é o directório para "
"colocar listas de pacotes descarregadas e <literal>status</literal> é o nome "
-"do ficheiro de estado do dpkg. <literal>preferences</literal> é o nome do "
+"do ficheiro de estado do &dpkg;. <literal>preferences</literal> é o nome do "
"ficheiro de preferências do APT. <literal>Dir::State</literal> contém o "
"directório predefinido para pré-fixar em todos os sub items que não começam "
"com <filename>/</filename> ou <filename>./</filename>."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:521
+#: apt.conf.5.xml:569
+#, fuzzy
+#| msgid ""
+#| "<literal>Dir::Cache</literal> contains locations pertaining to local "
+#| "cache information, such as the two package caches <literal>srcpkgcache</"
+#| "literal> and <literal>pkgcache</literal> as well as the location to place "
+#| "downloaded archives, <literal>Dir::Cache::archives</literal>. Generation "
+#| "of caches can be turned off by setting their names to be blank. This will "
+#| "slow down startup but save disk space. It is probably preferable to turn "
+#| "off the pkgcache rather than the srcpkgcache. Like <literal>Dir::State</"
+#| "literal> the default directory is contained in <literal>Dir::Cache</"
+#| "literal>"
msgid ""
"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
"information, such as the two package caches <literal>srcpkgcache</literal> "
"and <literal>pkgcache</literal> as well as the location to place downloaded "
"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
+"be turned off by setting their names to the empty string. This will slow "
+"down startup but save disk space. It is probably preferable to turn off the "
"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
"default directory is contained in <literal>Dir::Cache</literal>"
msgstr ""
"literal> o directório predefinido é contido em <literal>Dir::Cache</literal>"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:530
+#: apt.conf.5.xml:578
msgid ""
"<literal>Dir::Etc</literal> contains the location of configuration files, "
"<literal>sourcelist</literal> gives the location of the sourcelist and "
"ficheiro de configuração especificado por <envar>APT_CONFIG</envar>)."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:536
+#: apt.conf.5.xml:584
msgid ""
"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
"in lexical order from the directory specified. After this is done then the "
"estar feito então é carregado o ficheiro de configuração principal."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:540
+#: apt.conf.5.xml:588
msgid ""
"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
"Bin::Methods</literal> specifies the location of the method handlers and "
"respectivos programas."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:548
+#: apt.conf.5.xml:596
msgid ""
"The configuration item <literal>RootDir</literal> has a special meaning. If "
"set, all paths in <literal>Dir::</literal> will be relative to "
"procurado em <filename>/tmp/staging/var/lib/dpkg/status</filename>."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:561
+#: apt.conf.5.xml:609
msgid ""
"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
"which files APT should silently ignore while parsing the files in the "
"expressão regular."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:570
+#: apt.conf.5.xml:618
msgid "APT in DSelect"
msgstr "APT em DSelect"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:572
+#: apt.conf.5.xml:620
msgid ""
"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
+"control the default behavior. These are in the <literal>DSelect</literal> "
"section."
msgstr ""
"Quando o APT é usado com um método &dselect;, várias directivas de "
"<literal>DSelect</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:577
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-"Modo Cache Clean: este valor deve ser um de always, prompt, auto, pre-auto e "
-"never. always e prompt irão remover todos os pacotes da cache após a "
-"actualização, prompt (a predefinição) fá-lo condicionalmente. auto remove "
-"apenas aqueles pacotes que já não podem ser descarregados (por exemplo, "
-"substituídos por uma nova versão). pre-auto executa esta acção antes de "
-"descarregar novos pacotes."
+#: apt.conf.5.xml:625
+msgid ""
+"Cache Clean mode; this value may be one of <literal>always</literal>, "
+"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</"
+"literal> and <literal>never</literal>. <literal>always</literal> and "
+"<literal>prompt</literal> will remove all packages from the cache after "
+"upgrading, <literal>prompt</literal> (the default) does so conditionally. "
+"<literal>auto</literal> removes only those packages which are no longer "
+"downloadable (replaced with a new version for instance). <literal>pre-auto</"
+"literal> performs this action before downloading new packages."
+msgstr ""
+"Modo Cache Clean: este valor deve ser um de <literal>always</literal>, "
+"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</"
+"literal> e <literal>never</literal>. <literal>always</literal> e "
+"<literal>prompt</literal> irão remover todos os pacotes da cache após a "
+"actualização, <literal>prompt</literal> (a predefinição) fá-lo "
+"condicionalmente. <literal>auto</literal> apenas aqueles pacotes que já não "
+"podem ser descarregados (por exemplo, substituídos por uma nova versão). "
+"<literal>pre-auto</literal> executa esta acção antes de descarregar novos "
+"pacotes."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:586
+#: apt.conf.5.xml:639
msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
+"The contents of this variable are passed to &apt-get; as command line "
+"options when it is run for the install phase."
msgstr ""
"O conteúdo desta variável é passado ao &apt-get; como opções de linha de "
"comandos quando é corrido para a fase de instalação."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:591
+#: apt.conf.5.xml:644
msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
+"The contents of this variable are passed to &apt-get; as command line "
+"options when it is run for the update phase."
msgstr ""
"O conteúdo desta variável é passado ao &apt-get; como opções de linha de "
"comandos quando é executado para a fase de actualização."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:596
+#: apt.conf.5.xml:649
msgid ""
"If true the [U]pdate operation in &dselect; will always prompt to continue. "
"The default is to prompt only on error."
"continuar. A predefinição é avisar apenas em caso de erro."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:602
-msgid "How APT calls dpkg"
-msgstr "Como o APT chama o dpkg"
+#: apt.conf.5.xml:655
+msgid "How APT calls &dpkg;"
+msgstr "Como o APT chama o &dpkg;"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:603
+#: apt.conf.5.xml:656
msgid ""
"Several configuration directives control how APT invokes &dpkg;. These are "
"in the <literal>DPkg</literal> section."
"&dpkg;. Estas estão na secção <literal>DPkg</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:608
+#: apt.conf.5.xml:661
msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
+"This is a list of options to pass to &dpkg;. The options must be specified "
"using the list notation and each list item is passed as a single argument to "
"&dpkg;."
msgstr ""
-"Isto é uma lista de opções para passar ao dpkg. As opções têm de ser "
+"Isto é uma lista de opções para passar ao &dpkg;. As opções têm de ser "
"especificadas usando a notação de lista e cada item da lista é passado como "
"um argumento único ao &dpkg;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:614
+#: apt.conf.5.xml:667
msgid ""
"This is a list of shell commands to run before/after invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
+"commands are invoked in order using <filename>/bin/sh</filename>; should any "
"fail APT will abort."
msgstr ""
"Isto é uma lista de comandos shell para executar antes/após invocar o "
"bin/sh</filename>, caso algum deles falhe, o APT irá abortar."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:621
+#: apt.conf.5.xml:674
+#, fuzzy
+#| msgid ""
+#| "This is a list of shell commands to run before invoking &dpkg;. Like "
+#| "<literal>options</literal> this must be specified in list notation. The "
+#| "commands are invoked in order using <filename>/bin/sh</filename>; should "
+#| "any fail APT will abort. APT will pass to the commands on standard input "
+#| "the filenames of all .deb files it is going to install, one per line."
msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
+"This is a list of shell commands to run before invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
+"commands are invoked in order using <filename>/bin/sh</filename>; should any "
+"fail APT will abort. APT will pass the filenames of all .deb files it is "
+"going to install to the commands, one per line on standard input."
msgstr ""
"Isto é uma lista de comandos shell para executar antes de invocar o &dpkg;. "
"Tal como as <literal>opções</literal> isto tem que ser especificado em "
"deb que vai instalar, um por cada linha."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:627
+#: apt.conf.5.xml:680
msgid ""
"Version 2 of this protocol dumps more information, including the protocol "
"version, the APT configuration space and the packages, files and versions "
"dado ao <literal>Pre-Install-Pkgs</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:635
+#: apt.conf.5.xml:688
msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is <filename>/"
-"</filename>."
+"APT chdirs to this directory before invoking &dpkg;, the default is "
+"<filename>/</filename>."
msgstr ""
-"O APT muda para este directório (chdir) antes de invocar o dpkg, a "
+"O APT muda para este directório (chdir) antes de invocar o &dpkg;, a "
"predefinição é <filename>/</filename>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:640
+#: apt.conf.5.xml:693
msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
+"These options are passed to &dpkg-buildpackage; when compiling packages; the "
"default is to disable signing and produce all binaries."
msgstr ""
"Estas opções são passadas ao &dpkg-buildpackage; quando compila pacotes, a "
"predefinição é desactivar a assinatura e produzir todos os binários."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:645
+#: apt.conf.5.xml:698
msgid "dpkg trigger usage (and related options)"
msgstr "Utilização trigger do dpkg (e opções relacionadas)"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:646
+#: apt.conf.5.xml:699
#, fuzzy
#| msgid ""
-#| "APT can call dpkg in a way so it can make aggressive use of triggers over "
-#| "multiply calls of dpkg. Without further options dpkg will use triggers "
-#| "only in between his own run. Activating these options can therefore "
-#| "decrease the time needed to perform the install / upgrade. Note that it "
-#| "is intended to activate these options per default in the future, but as "
-#| "it changes the way APT calling dpkg drastically it needs a lot more "
-#| "testing. <emphasis>These options are therefore currently experimental "
-#| "and should not be used in productive environments.</emphasis> Also it "
-#| "breaks the progress reporting so all frontends will currently stay around "
-#| "half (or more) of the time in the 100% state while it actually configures "
-#| "all packages."
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiple calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing. <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-"APT pode chamar o dpkg num modo que faz uso agressivo dos triggers sobre "
-"múltiplas chamadas do dpkg. Sem mais opções o dpkg irá usar triggers apenas "
-"entre a sua própria execução. Activando estas opções pode portanto diminuir "
-"o tempo necessário para executar a instalação / actualização. Note que é "
-"intenção futura activar estas opções por predefinição, mas como muda "
-"drasticamente a maneira como o APT chama o dpkg, precisa de muitos mais "
+#| "APT can call &dpkg; in a way so it can make aggressive use of triggers "
+#| "over multiply calls of &dpkg;. Without further options &dpkg; will use "
+#| "triggers only in between his own run. Activating these options can "
+#| "therefore decrease the time needed to perform the install / upgrade. Note "
+#| "that it is intended to activate these options per default in the future, "
+#| "but as it changes the way APT calling &dpkg; drastically it needs a lot "
+#| "more testing. <emphasis>These options are therefore currently "
+#| "experimental and should not be used in production environments.</"
+#| "emphasis> Also it breaks the progress reporting so all frontends will "
+#| "currently stay around half (or more) of the time in the 100% state while "
+#| "it actually configures all packages."
+msgid ""
+"APT can call &dpkg; in such a way as to let it make aggressive use of "
+"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
+"use triggers once each time it runs. Activating these options can therefore "
+"decrease the time needed to perform the install or upgrade. Note that it is "
+"intended to activate these options per default in the future, but as it "
+"drastically changes the way APT calls &dpkg; it needs a lot more testing. "
+"<emphasis>These options are therefore currently experimental and should not "
+"be used in production environments.</emphasis> It also breaks progress "
+"reporting such that all front-ends will currently stay around half (or more) "
+"of the time in the 100% state while it actually configures all packages."
+msgstr ""
+"APT pode chamar o &dpkg; num modo que faz uso agressivo dos triggers sobre "
+"múltiplas chamadas do &dpkg;. Sem mais opções o &dpkg; irá usar triggers "
+"apenas entre a sua própria execução. Activando estas opções pode portanto "
+"diminuir o tempo necessário para executar a instalação / actualização. Note "
+"que é intenção futura activar estas opções por predefinição, mas como muda "
+"drasticamente a maneira como o APT chama o &dpkg;, precisa de muitos mais "
"testes. <emphasis>Estas opções são portanto experimentais e não deve ser "
"usadas em ambientes produtivos.</emphasis> Também interrompe o relatório de "
"progresso, então todos os frontends irão permanecer a cerca de metade (ou "
"todos os pacotes."
#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:661
+#: apt.conf.5.xml:714
#, no-wrap
msgid ""
"DPkg::NoTriggers \"true\";\n"
"DPkg::TriggersPending \"true\";"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:655
+#: apt.conf.5.xml:708
msgid ""
"Note that it is not guaranteed that APT will support these options or that "
"these options will not cause (big) trouble in the future. If you have "
"understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
+"enough to help testing them, create a new configuration file and test a "
"combination of options. Please report any bugs, problems and improvements "
"you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
+"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
"see e.g. <command>dpkg --audit</command>. A defensive option combination "
"would be <placeholder type=\"literallayout\" id=\"0\"/>"
msgstr ""
"ajudar a testá-la, crie um novo ficheiro de configuração e teste uma "
"combinação de opções. Por favor reporte quaisquer bugs, problemas e "
"melhoramentos que encontre e certifique-se de anotar nos seus relatórios "
-"quais as opções que usou. Pedir ajuda ao dpkg também pode ser útil para "
+"quais as opções que usou. Pedir ajuda ao &dpkg; também pode ser útil para "
"propósitos de depuração, veja ex. <command>dpkg --audit</command>. Uma "
"combinação de opções defensiva seria <placeholder type=\"literallayout\" id="
"\"0\"/>"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:668
+#: apt.conf.5.xml:721
msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
+"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
"call). See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call. Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-"Adiciona a bandeira 'no triggers' a todas as chamadas do dpkg (excepto a "
+"short: &dpkg; will not run the triggers when this flag is present unless it "
+"is explicitly called to do so in an extra call. Note that this option "
+"exists (undocumented) also in older APT versions with a slightly different "
+"meaning: Previously these option only append --no-triggers to the configure "
+"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
+"calls."
+msgstr ""
+"Adiciona a bandeira 'no triggers' a todas as chamadas do &dpkg; (excepto a "
"chamada ConfigurePending). Veja &dpkg; se está interessado no que isto "
-"realmente representa. Em resumo: o dpkg não irá correr os triggers quando "
+"realmente representa. Em resumo: o &dpkg; não irá correr os triggers quando "
"esta bandeira está presente a menos que seja explicitamente chamado a fazê-"
"lo numa chamada extra. Note que esta opção existe (não documentada) também "
-"em versões mais antigas do apt com um significado ligeiramente diferente: "
+"em versões mais antigas do APT com um significado ligeiramente diferente: "
"Anteriormente esta opção apenas acrescentava --no-triggers às chamadas "
-"configure para o dpkg - agora o apt irá adicionar esta bandeira também às "
+"configure para o &dpkg; - agora o APT irá adicionar esta bandeira também às "
"chamadas unpack e remove."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:676
+#: apt.conf.5.xml:729
+#, fuzzy
+#| msgid ""
+#| "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
+#| "and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
+#| "value and causes APT to configure all packages explicit. The "
+#| "\"<literal>smart</literal>\" way is it to configure only packages which "
+#| "need to be configured before another package can be unpacked (Pre-"
+#| "Depends) and let the rest configure by &dpkg; with a call generated by "
+#| "the next option. \"<literal>no</literal>\" on the other hand will not "
+#| "configure anything and totally rely on &dpkg; for configuration (which "
+#| "will at the moment fail if a Pre-Depends is encountered). Setting this "
+#| "option to another than the all value will implicitly activate also the "
+#| "next option per default as otherwise the system could end in an "
+#| "unconfigured status which could be unbootable!"
msgid ""
"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit. The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next option. "
-"\"<literal>no</literal>\" on the other hand will not configure anything and "
-"totally rely on dpkg for configuration (which will at the moment fail if a "
-"Pre-Depends is encountered). Setting this option to another than the all "
-"value will implicitly activate also the next option per default as otherwise "
-"the system could end in an unconfigured status which could be unbootable!"
+"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
+"\", which causes APT to configure all packages. The \"<literal>smart</"
+"literal>\" way is to configure only packages which need to be configured "
+"before another package can be unpacked (Pre-Depends), and let the rest be "
+"configured by &dpkg; with a call generated by the ConfigurePending option "
+"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
+"anything, and totally relies on &dpkg; for configuration (which at the "
+"moment will fail if a Pre-Depends is encountered). Setting this option to "
+"any value other than <literal>all</literal> will implicitly also activate "
+"the next option by default, as otherwise the system could end in an "
+"unconfigured and potentially unbootable state."
msgstr ""
"Valores válidos são \"<literal>all</literal>\", \"<literal>smart</literal>\" "
"e \"<literal>no</literal>\". \"<literal>all</literal>\" é o valor "
"predefinido e faz com que o APT configure todos os pacotes explícitos. O "
"modo \"<literal>smart</literal>\" serve para configurar apenas pacotes que "
"precisam de ser configurados antes que outro pacote possa ser desempacotado "
-"(pré-dependências) e o resto configurado pelo dpkg com uma chamada gerada "
+"(pré-dependências) e o resto configurado pelo &dpkg; com uma chamada gerada "
"pela próxima opção. \"<literal>no</literal>\" por outro lado não irá "
-"configurar nada e confiar no dpkg para configurações (o qual irá falhar se "
+"configurar nada e confiar no &dpkg; para configurações (o qual irá falhar se "
"encontrar uma pré-dependência). Definir esta opção para outra que não seja o "
"valor all irá implicitamente activar também a próxima opção predefinida, "
"caso contrário o sistema poderia acabar num estado não configurado o qual "
"poderia não arrancar!"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:687
-msgid ""
-"If this option is set apt will call <command>dpkg --configure --pending</"
-"command> to let dpkg handle all required configurations and triggers. This "
-"option is activated automatic per default if the previous option is not set "
-"to <literal>all</literal>, but deactivating could be useful if you want to "
-"run APT multiple times in a row - e.g. in an installer. In these sceneries "
-"you could deactivate this option in all but the last run."
-msgstr ""
-"Se esta opção for definida, o apt irá chamar <command>dpkg --configure --"
-"pending</command> para permitir ao dpkg lidar como todas as configurações e "
-"triggers requisitados. Esta opção é activada automaticamente por "
+#: apt.conf.5.xml:744
+#, fuzzy
+#| msgid ""
+#| "If this option is set, APT will call <command>dpkg --configure --pending</"
+#| "command> to let &dpkg; handle all required configurations and triggers. "
+#| "This option is activated automatically per default if the previous option "
+#| "is not set to <literal>all</literal>, but deactivating it could be useful "
+#| "if you want to run APT multiple times in a row - e.g. in an installer. In "
+#| "these sceneries you could deactivate this option in all but the last run."
+msgid ""
+"If this option is set APT will call <command>dpkg --configure --pending</"
+"command> to let &dpkg; handle all required configurations and triggers. This "
+"option is activated automatically per default if the previous option is not "
+"set to <literal>all</literal>, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In these "
+"sceneries you could deactivate this option in all but the last run."
+msgstr ""
+"Se esta opção for definida, o APT irá chamar <command>dpkg --configure --"
+"pending</command> para permitir ao &dpkg; lidar como todas as configurações "
+"e triggers requisitados. Esta opção é activada automaticamente por "
"predefinição se a opção anterior não for definida para <literal>all</"
"literal>, mas desactivá-la pode ser útil se deseja correr o APT múltiplas "
"vezes numa fila - ex. numa instalação. Nestes cenários você pode desactivar "
"esta opção em todas excepto na última execução."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:694
+#: apt.conf.5.xml:751
msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
+"Useful for the <literal>smart</literal> configuration as a package which has "
+"pending triggers is not considered as <literal>installed</literal>, and "
+"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
+"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
+"process all triggers, not only the triggers needed to configure this package."
msgstr ""
"Útil para configuração <literal>smart</literal>, pois um pacote que tenha "
"triggers pendentes não é considerado como <literal>installed</literal> e o "
-"dpkg trata-o como actualmente <literal>unpacked</literal> o que é um modo de "
-"lidar com pré-dependências (veja debbugs #526774). Note que isto irá "
+"&dpkg; trata-o como actualmente <literal>unpacked</literal> o que é um modo "
+"de lidar com pré-dependências (veja debbugs #526774). Note que isto irá "
"processar todos os triggers, e não apenas os triggers necessários para "
"configurar este pacote."
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:700
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by Pre-"
-"Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-"Como a configuração pode ser diferida a ser feita no final pelo dpkg, pode "
-"ser tentada a ordenar a série de desempacotamento apenas por necessidades "
-"críticas, ex. por pré-dependências. A predefinição é verdadeiro e então o "
-"método \"antigo\" de ordenar em vários passos por tudo. Enquanto ambos os "
-"métodos estão presentes em versões jovens do APT, o método "
-"<literal>OrderCritical</literal> não foi usado, portanto este método é muito "
-"experimental e necessita de mais melhorias antes de se tornar realmente útil."
-
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:715
+#: apt.conf.5.xml:764
#, no-wrap
msgid ""
"OrderList::Score {\n"
"};"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:708
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated). These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"
default values. <placeholder type=\"literallayout\" id=\"0\"/>"
+#: apt.conf.5.xml:757
+msgid ""
+"Essential packages (and their dependencies) should be configured immediately "
+"after unpacking. It is a good idea to do this quite early in the upgrade "
+"process as these configure calls also currently require <literal>DPkg::"
+"TriggersPending</literal> which will run quite a few triggers (which may not "
+"be needed). Essentials get per default a high score but the immediate flag "
+"is relatively low (a package which has a Pre-Depends is rated higher). "
+"These option and the others in the same group can be used to change the "
+"scoring. The following example shows the settings with their default "
+"values. <placeholder type=\"literallayout\" id=\"0\"/>"
msgstr ""
"Os pacotes essenciais ( e as suas dependências) deve ser configurados "
"imediatamente após a descompactação. Será uma boa ideia fazer isto bem cedo "
"predefinidos. <placeholder type=\"literallayout\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:728
+#: apt.conf.5.xml:777
msgid "Periodic and Archives options"
msgstr "Opções Periodic e Archives"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:729
+#: apt.conf.5.xml:778
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
+"of options configure behavior of apt periodic updates, which is done by the "
+"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
+"for the brief documentation of these options."
msgstr ""
"Os grupos de opções <literal>APT::Periodic</literal> e <literal>APT::"
"Archives</literal> configuram o comportamento das actualizações periódicas "
"Veja o cabeçalho deste script para uma breve documentação das suas opções."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:737
+#: apt.conf.5.xml:786
msgid "Debug options"
msgstr "Opções de depuração"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:739
+#: apt.conf.5.xml:788
msgid ""
"Enabling options in the <literal>Debug::</literal> section will cause "
"debugging information to be sent to the standard error stream of the program "
"interesse para o utilizador normal, mas algumas podem ter:"
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:750
+#: apt.conf.5.xml:799
msgid ""
"<literal>Debug::pkgProblemResolver</literal> enables output about the "
"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
"remove, purge</literal>."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:758
+#: apt.conf.5.xml:807
msgid ""
"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
"used to run some operations (for instance, <literal>apt-get -s install</"
"<literal>apt-get -s install</literal>) como um utilizador não root."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:767
+#: apt.conf.5.xml:816
msgid ""
"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
"time that <literal>apt</literal> invokes &dpkg;."
#. motivating example, except I haven't a clue why you'd want
#. to do this.
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:775
+#: apt.conf.5.xml:824
msgid ""
"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
"in CD-ROM IDs."
"IDs de CD-ROM."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:785
+#: apt.conf.5.xml:834
msgid "A full list of debugging options to apt follows."
msgstr "Segue-se uma lista completa de opções de depuração para o apt."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:794
+#: apt.conf.5.xml:843
msgid ""
"Print information related to accessing <literal>cdrom://</literal> sources."
msgstr ""
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:805
+#: apt.conf.5.xml:854
msgid "Print information related to downloading packages using FTP."
msgstr ""
"Escreve informação relacionada com o descarregamento de pacotes usando FTP."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:816
+#: apt.conf.5.xml:865
msgid "Print information related to downloading packages using HTTP."
msgstr ""
"Escreve informação relacionada com o descarregamento de pacotes usando HTTP."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:827
+#: apt.conf.5.xml:876
msgid "Print information related to downloading packages using HTTPS."
msgstr ""
"Escreve informação relacionada com o descarregamento de pacotes usando HTTPS."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:838
+#: apt.conf.5.xml:887
msgid ""
"Print information related to verifying cryptographic signatures using "
"<literal>gpg</literal>."
"criptográficas usando <literal>gpg</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:849
+#: apt.conf.5.xml:898
msgid ""
"Output information about the process of accessing collections of packages "
"stored on CD-ROMs."
"armazenados em CD-ROMs."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:859
+#: apt.conf.5.xml:908
msgid "Describes the process of resolving build-dependencies in &apt-get;."
msgstr ""
"Descreve os processos de resolver dependências de compilação no &apt-get;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:869
+#: apt.conf.5.xml:918
msgid ""
"Output each cryptographic hash that is generated by the <literal>apt</"
"literal> libraries."
"<literal>apt</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:879
+#: apt.conf.5.xml:928
msgid ""
"Do not include information from <literal>statfs</literal>, namely the number "
"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
"para um CD-ROM."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:890
+#: apt.conf.5.xml:939
msgid ""
"Disable all file locking. For instance, this will allow two instances of "
"<quote><literal>apt-get update</literal></quote> to run at the same time."
"literal></quote> ao mesmo tempo."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:902
+#: apt.conf.5.xml:951
msgid "Log when items are added to or removed from the global download queue."
msgstr ""
"Regista no log quando os items são adicionados ou removidos da fila de "
"download global."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:912
+#: apt.conf.5.xml:961
msgid ""
"Output status messages and errors related to verifying checksums and "
"cryptographic signatures of downloaded files."
"checksums e assinaturas criptográficas dos ficheiros descarregados."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:922
+#: apt.conf.5.xml:971
msgid ""
"Output information about downloading and applying package index list diffs, "
"and errors relating to package index list diffs."
"pacote."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:934
+#: apt.conf.5.xml:983
msgid ""
"Output information related to patching apt package lists when downloading "
"index diffs instead of full indices."
"do apt quando se descarrega diffs de índice em vez de índices completos."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:945
+#: apt.conf.5.xml:994
msgid ""
"Log all interactions with the sub-processes that actually perform downloads."
msgstr ""
"downloads."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:956
+#: apt.conf.5.xml:1005
msgid ""
"Log events related to the automatically-installed status of packages and to "
"the removal of unused packages."
"de pacotes e com a remoção de pacotes não utilizados."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:966
+#: apt.conf.5.xml:1015
msgid ""
"Generate debug messages describing which packages are being automatically "
"installed to resolve dependencies. This corresponds to the initial auto-"
"literal>; veja <literal>Debug::pkgProblemResolver</literal> para isso."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:980
+#: apt.conf.5.xml:1029
msgid ""
-"Generate debug messages describing which package is marked as keep/install/"
+"Generate debug messages describing which packages are marked as keep/install/"
"remove while the ProblemResolver does his work. Each addition or deletion "
-"may trigger additional actions; they are shown indented two additional space "
-"under the original entry. The format for each line is <literal>MarkKeep</"
-"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> "
-"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)"
-"</literal> where <literal>a.b.c</literal> is the current version of the "
-"package, <literal>d.e.f</literal> is the version considered for installation "
-"and <literal>x.y.z</literal> is a newer version, but not considered for "
-"installation (because of a low pin score). The later two can be omitted if "
-"there is none or if it is the same version as the installed. "
-"<literal>section</literal> is the name of the section the package appears in."
+"may trigger additional actions; they are shown indented two additional "
+"spaces under the original entry. The format for each line is "
+"<literal>MarkKeep</literal>, <literal>MarkDelete</literal> or "
+"<literal>MarkInstall</literal> followed by <literal>package-name <a.b.c -"
+"> d.e.f | x.y.z> (section)</literal> where <literal>a.b.c</literal> is "
+"the current version of the package, <literal>d.e.f</literal> is the version "
+"considered for installation and <literal>x.y.z</literal> is a newer version, "
+"but not considered for installation (because of a low pin score). The later "
+"two can be omitted if there is none or if it is the same as the installed "
+"version. <literal>section</literal> is the name of the section the package "
+"appears in."
msgstr ""
"Gera mensagens de depuração descrevendo qual pacote está marcado como manter/"
"instalar/remover enquanto o \"solucionador-de-problemas\" faz o seu "
"pacote aparece."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1002
-msgid "Dump the default configuration to standard error on startup."
-msgstr "Despeja a configuração predefinida para o erro standard no arranque."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1012
+#: apt.conf.5.xml:1050
msgid ""
"When invoking &dpkg;, output the precise command line with which it is being "
"invoked, with arguments separated by a single space character."
"único."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1023
+#: apt.conf.5.xml:1061
msgid ""
"Output all the data received from &dpkg; on the status file descriptor and "
"any errors encountered while parsing it."
"estado e quaisquer erros encontrados enquanto os analisa."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1034
+#: apt.conf.5.xml:1072
msgid ""
"Generate a trace of the algorithm that decides the order in which "
"<literal>apt</literal> should pass packages to &dpkg;."
"literal> deve passar os pacotes ao &dpkg;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1046
+#: apt.conf.5.xml:1084
msgid ""
"Output status messages tracing the steps performed when invoking &dpkg;."
msgstr ""
"&dpkg;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1057
+#: apt.conf.5.xml:1095
msgid "Output the priority of each package list on startup."
msgstr "Escreve a prioridade da cada lista de pacote no arranque."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1067
+#: apt.conf.5.xml:1105
msgid ""
"Trace the execution of the dependency resolver (this applies only to what "
"happens when a complex dependency problem is encountered)."
"acontece quando é encontrado um problema de dependências complexo)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1078
+#: apt.conf.5.xml:1116
msgid ""
"Display a list of all installed packages with their calculated score used by "
"the pkgProblemResolver. The description of the package is the same as "
"mesma que é descrita em <literal>Debug::pkgDepCache::Marker</literal>"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1090
+#: apt.conf.5.xml:1128
msgid ""
"Print information about the vendors read from <filename>/etc/apt/vendors."
"list</filename>."
"vendors.list</filename>."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:1112 apt_preferences.5.xml:545 sources.list.5.xml:211
+#: apt.conf.5.xml:1150 apt_preferences.5.xml:545 sources.list.5.xml:211
#: apt-ftparchive.1.xml:596
msgid "Examples"
msgstr "Examples"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1113
+#: apt.conf.5.xml:1151
msgid ""
"&configureindex; is a configuration file showing example values for all "
"possible options."
#. ? reading apt.conf
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1125
+#: apt.conf.5.xml:1163
msgid "&apt-cache;, &apt-config;, &apt-preferences;."
msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
"literal>\" as filename extension and only contain alphanumeric, hyphen (-), "
"underscore (_) and period (.) characters. Otherwise APT will print a notice "
"that it has ignored a file, unless that file matches a pattern in the "
-"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in this "
+"<literal>Dir::Ignore-Files-Silently</literal> configuration list - in which "
"case it will be silently ignored."
msgstr ""
"Note que os ficheiros no directório <filename>/etc/apt/preferences.d</"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
#: apt_preferences.5.xml:187
-#, fuzzy
-#| msgid ""
-#| "The specific form assigns a priority (a \"Pin-Priority\") to one or more "
-#| "specified packages and specified version or version range. For example, "
-#| "the following record assigns a high priority to all versions of the "
-#| "<filename>perl</filename> package whose version number begins with "
-#| "\"<literal>5.8</literal>\". Multiple packages can be separated by spaces."
msgid ""
"The specific form assigns a priority (a \"Pin-Priority\") to one or more "
"specified packages with a specified version or version range. For example, "
"the following record assigns a high priority to all versions of the "
"<filename>perl</filename> package whose version number begins with "
-"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces."
+"\"<literal>&good-perl;</literal>\". Multiple packages can be separated by "
+"spaces."
msgstr ""
"O formato específico atribui um prioridade (um \"Pin-Priority\") a um ou "
"mais pacotes específicos e versão específica ou série de versões. Por "
"exemplo, o seguinte registo atribui uma alta prioridade a todas as versões "
"do pacote <filename>perl</filename> cujo número de versão começa com "
-"\"<literal>5.8</literal>\". Múltiplos pacotes podem ser separados por "
-"espaços."
+"\"<literal>&good-perl;</literal>\". Múltiplos pacotes podem ser separados "
+"por espaços."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
#: apt_preferences.5.xml:194
#, no-wrap
msgid ""
"Package: perl\n"
-"Pin: version 5.8*\n"
+"Pin: version &good-perl;*\n"
"Pin-Priority: 1001\n"
msgstr ""
"Package: perl\n"
-"Pin: version 5.8*\n"
+"Pin: version &good-perl;*\n"
"Pin-Priority: 1001\n"
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
#: apt_preferences.5.xml:264
msgid ""
"APT also supports pinning by &glob; expressions, and regular expressions "
-"surrounded by slashes. For example, the following example assigns the priority 500 "
-"to all packages from experimental where the name starts with gnome (as a &glob;"
-"-like expression) or contains the word kde (as a POSIX extended regular "
-"expression surrounded by slashes)."
+"surrounded by slashes. For example, the following example assigns the "
+"priority 500 to all packages from experimental where the name starts with "
+"gnome (as a &glob;-like expression) or contains the word kde (as a POSIX "
+"extended regular expression surrounded by slashes)."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
#, no-wrap
msgid ""
"Package: perl\n"
-"Pin: version 5.8*\n"
+"Pin: version &good-perl;*\n"
"Pin-Priority: 1001\n"
"\n"
"Package: *\n"
"Pin-Priority: 50\n"
msgstr ""
"Package: perl\n"
-"Pin: version 5.8*\n"
+"Pin: version &good-perl;*\n"
"Pin-Priority: 1001\n"
"\n"
"Package: *\n"
msgid ""
"The most recent available version of the <literal>perl</literal> package "
"will be installed, so long as that version's version number begins with "
-"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of "
-"<literal>perl</literal> is available and the installed version is 5.9*, then "
-"<literal>perl</literal> will be downgraded."
+"\"<literal>&good-perl;</literal>\". If <emphasis>any</emphasis> &good-perl;"
+"* version of <literal>perl</literal> is available and the installed version "
+"is &bad-perl;*, then <literal>perl</literal> will be downgraded."
msgstr ""
"Será instalada a versão mais recente disponível do pacote <literal>perl</"
-"literal>, desde que o número da versão comece com \"<literal>5.8</literal>"
-"\". Se <emphasis>qualquer</emphasis> versão 5.8* do <literal>perl</literal> "
-"estiver disponível e a versão instalada for 5.9*, então será feito um "
-"downgrade ao <literal>perl</literal>."
+"literal>, desde que o número da versão comece com \"<literal>&good-perl;</"
+"literal>\". Se <emphasis>qualquer</emphasis> versão &good-perl;* do "
+"<literal>perl</literal> estiver disponível e a versão instalada for &bad-"
+"perl;*, então será feito um downgrade ao <literal>perl</literal>."
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
#: apt_preferences.5.xml:379
#. type: Content of: <refentry><refnamediv><refpurpose>
#: sources.list.5.xml:33
-msgid "Package resource list for APT"
-msgstr "Lista de recursos de pacote para APT"
+msgid "List of configured APT data sources"
+msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:37
+#: sources.list.5.xml:38
msgid ""
-"The package resource list is used to locate archives of the package "
-"distribution system in use on the system. At this time, this manual page "
-"documents only the packaging system used by the Debian system. This control "
-"file is <filename>/etc/apt/sources.list</filename>."
+"The source list <filename>/etc/apt/sources.list</filename> is designed to "
+"support any number of active sources and a variety of source media. The file "
+"lists one source per line, with the most preferred source listed first. The "
+"information available from the configured sources is acquired by "
+"<command>apt-get update</command> (or by an equivalent command from another "
+"APT front-end)."
msgstr ""
-"A lista de recursos de pacote é usada para localizar arquivos do sistema de "
-"distribuição de pacotes usado no sistema. Neste momento, este manual "
-"documenta apenas o sistema de pacotes usado pelo sistema Debian. Este "
-"ficheiro de controle é <filename>/etc/apt/sources.list</filename>."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:42
-msgid ""
-"The source list is designed to support any number of active sources and a "
-"variety of source media. The file lists one source per line, with the most "
-"preferred source listed first. The format of each line is: <literal>type uri "
-"args</literal> The first item, <literal>type</literal> determines the format "
-"for <literal>args</literal>. <literal>uri</literal> is a Universal Resource "
-"Identifier (URI), which is a superset of the more specific and well-known "
-"Universal Resource Locator, or URL. The rest of the line can be marked as a "
-"comment by using a #."
-msgstr ""
-"A lista de fontes é desenhada para suportar qualquer número de fontes "
-"activas e uma variedade de médias fonte. O ficheiro lista uma fonte por "
-"linha, com a fonte mais preferida listada em primeiro lugar. O formato para "
-"cada linha é: <literal>tipo uri argumentos</literal>. O primeiro item, "
-"<literal>tipo</literal> determina o formato para <literal>argumentos</"
-"literal>. <literal>uri</literal> é um Universal Resource Identifier (URI), o "
-"que é um super-conjunto para o mais específico e conhecido Universal "
-"Resource Locator, ou URL. O resto da linha pode ser marcado como um "
-"comentário usando um #."
+#: sources.list.5.xml:45
+msgid ""
+"Each line specifying a source starts with type (e.g. <literal>deb-src</"
+"literal>) followed by options and arguments for this type. Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment."
+msgstr ""
#. type: Content of: <refentry><refsect1><title>
#: sources.list.5.xml:53
"digits (0-9), underscore (_), hyphen (-) and period (.) characters. "
"Otherwise APT will print a notice that it has ignored a file, unless that "
"file matches a pattern in the <literal>Dir::Ignore-Files-Silently</literal> "
-"configuration list - in this case it will be silently ignored."
+"configuration list - in which case it will be silently ignored."
msgstr ""
"O directório <filename>/etc/apt/sources.list.d</filename> disponibiliza um "
"modo de adicionar entradas na sources.list em ficheiros separados. O formato "
#: sources.list.5.xml:66
#, fuzzy
#| msgid ""
-#| "The <literal>deb</literal> type describes a typical two-level Debian "
+#| "The <literal>deb</literal> type references a typical two-level Debian "
#| "archive, <filename>distribution/component</filename>. Typically, "
#| "<literal>distribution</literal> is generally one of <literal>stable</"
#| "literal> <literal>unstable</literal> or <literal>testing</literal> while "
#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
#| "src</literal> line is required to fetch source indexes."
msgid ""
-"The <literal>deb</literal> type describes a typical two-level Debian "
-"archive, <filename>distribution/component</filename>. Typically, "
-"<literal>distribution</literal> is generally an archivename like "
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally an archive name like "
"<literal>stable</literal> or <literal>testing</literal> or a codename like "
"<literal>&stable-codename;</literal> or <literal>&testing-codename;</"
-"literal> while component is one of <literal>main</literal> <literal>contrib</"
-"literal> or <literal>non-free</literal>. The <literal>deb-src</literal> type "
-"describes a debian distribution's source code in the same form as the "
-"<literal>deb</literal> type. A <literal>deb-src</literal> line is required "
-"to fetch source indexes."
+"literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
msgstr ""
"O tipo <literal>deb</literal> descreve um arquivo Debian típico de dois "
"níveis, <filename>distribution/component</filename>. Tipicamente "
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml:83
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>distribution</literal> can specify an exact path, in which case "
+#| "the components must be omitted and <literal>distribution</literal> must "
+#| "end with a slash (<literal>/</literal>). This is useful for the case when "
+#| "only a particular sub-section of the archive denoted by the URI is of "
+#| "interest. If <literal>distribution</literal> does not specify an exact "
+#| "path, at least one <literal>component</literal> must be present."
msgid ""
"The URI for the <literal>deb</literal> type must specify the base of the "
"Debian distribution, from which APT will find the information it needs. "
"<literal>distribution</literal> can specify an exact path, in which case the "
"components must be omitted and <literal>distribution</literal> must end with "
-"a slash (/). This is useful for when the case only a particular sub-section "
-"of the archive denoted by the URI is of interest. If <literal>distribution</"
-"literal> does not specify an exact path, at least one <literal>component</"
-"literal> must be present."
+"a slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-section of the archive denoted by the URI is of interest. If "
+"<literal>distribution</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
msgstr ""
"O URI para o tipo <literal>deb</literal> tem de especificar a base da "
"distribuição Debian, a partir do qual o APT irá encontrar a informação que "
"precisa. <literal>distribution</literal> pode especificar um caminho exacto, "
"que no caso os componente têm de ser omitidos e <literal>distribution</"
-"literal> deve terminar com uma barra (/). Isto é útil para o caso de apenas "
-"ser de interesse uma sub-secção particular do arquivo denotado pelo URI. Se "
-"<literal>distribution</literal> não especificar um caminho exacto, pelo "
-"menos um <literal>component</literal> tem de estar presente."
+"literal> deve terminar com uma barra (<literal>/</literal>). Isto é útil "
+"para o caso de apenas ser de interesse uma sub-secção particular do arquivo "
+"denotado pelo URI. Se <literal>distribution</literal> não especificar um "
+"caminho exacto, pelo menos um <literal>component</literal> tem de estar "
+"presente."
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml:92
+#, fuzzy
+#| msgid ""
+#| "<literal>distribution</literal> may also contain a variable, <literal>"
+#| "$(ARCH)</literal> which expands to the Debian architecture (i386, amd64, "
+#| "powerpc, ...) used on the system. This permits architecture-independent "
+#| "<filename>sources.list</filename> files to be used. In general this is "
+#| "only of interest when specifying an exact path, <literal>APT</literal> "
+#| "will automatically generate a URI with the current architecture otherwise."
msgid ""
"<literal>distribution</literal> may also contain a variable, <literal>$(ARCH)"
-"</literal> which expands to the Debian architecture (i386, m68k, "
-"powerpc, ...) used on the system. This permits architecture-independent "
-"<filename>sources.list</filename> files to be used. In general this is only "
-"of interest when specifying an exact path, <literal>APT</literal> will "
-"automatically generate a URI with the current architecture otherwise."
+"</literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path, "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
msgstr ""
"<literal>distribution</literal> também pode conter uma variável. <literal>"
-"$(ARCH)</literal> a qual se expande à arquitectura Debian (i386, m68k, "
+"$(ARCH)</literal> a qual se expande à arquitectura Debian (i386, amd64, "
"powerpc, ...) usada no sistema. Isto permite que seja usados ficheiros "
"<filename>sources.list</filename> independentes da arquitectura. Em geral, "
"isto é apenas de interesse quando se especifica um caminho exacto. De outro "
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml:112
msgid ""
-"<literal>options</literal> is always optional and needs to be surounded by "
+"<literal>options</literal> is always optional and needs to be surrounded by "
"square brackets. It can consist of multiple settings in the form "
"<literal><replaceable>setting</replaceable>=<replaceable>value</"
"replaceable></literal>. Multiple settings are separated by spaces. The "
-"following settings are supported by APT, note though that unsupported "
-"settings will be ignored silently:"
+"following settings are supported by APT (note however that unsupported "
+"settings will be ignored silently):"
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
msgid ""
"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
"replaceable>,…</literal> can be used to specify for which architectures "
-"packages information should be downloaded. If this option is not set all "
+"information should be downloaded. If this option is not set all "
"architectures defined by the <literal>APT::Architectures</literal> option "
"will be downloaded."
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
#: sources.list.5.xml:172
+#, fuzzy
+#| msgid ""
+#| "The ftp scheme specifies an FTP server for the archive. APT's FTP "
+#| "behavior is highly configurable; for more information see the &apt-conf; "
+#| "manual page. Please note that a ftp proxy can be specified by using the "
+#| "<envar>ftp_proxy</envar> environment variable. It is possible to specify "
+#| "a http proxy (http proxy servers often understand ftp urls) using this "
+#| "method and ONLY this method. ftp proxies using http specified in the "
+#| "configuration file will be ignored."
msgid ""
"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
"is highly configurable; for more information see the &apt-conf; manual page. "
-"Please note that a ftp proxy can be specified by using the <envar>ftp_proxy</"
-"envar> environment variable. It is possible to specify a http proxy (http "
-"proxy servers often understand ftp urls) using this method and ONLY this "
-"method. ftp proxies using http specified in the configuration file will be "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
"ignored."
msgstr ""
"O esquema ftp especifica um servidor FTP para o arquivo. o comportamento FTP "
"especificados no ficheiro de configuração serão ignorados."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:183
+#: sources.list.5.xml:184
+#, fuzzy
+#| msgid ""
+#| "The copy scheme is identical to the file scheme except that packages are "
+#| "copied into the cache directory instead of used directly at their "
+#| "location. This is useful for people using a zip disk to copy files "
+#| "around with APT."
msgid ""
"The copy scheme is identical to the file scheme except that packages are "
"copied into the cache directory instead of used directly at their location. "
-"This is useful for people using a zip disk to copy files around with APT."
+"This is useful for people using removable media to copy files around with "
+"APT."
msgstr ""
"O esquema copy é idêntico ao esquema file com a excepção que os pacotes são "
"copiados para o directório cache em vez serem usados directamente da sua "
"com o APT."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:190
+#: sources.list.5.xml:191
+#, fuzzy
+#| msgid ""
+#| "The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given "
+#| "user and access the files. It is a good idea to do prior arrangements "
+#| "with RSA keys or rhosts. Access to files on the remote uses standard "
+#| "<command>find</command> and <command>dd</command> commands to perform the "
+#| "file transfers from the remote."
msgid ""
-"The rsh/ssh method invokes rsh/ssh to connect to a remote host as a given "
-"user and access the files. It is a good idea to do prior arrangements with "
-"RSA keys or rhosts. Access to files on the remote uses standard "
-"<command>find</command> and <command>dd</command> commands to perform the "
-"file transfers from the remote."
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
msgstr ""
"O método rsh/ssh invoca rsh/ssh a ligar a uma máquina remota como um "
"utilizador fornecido e acede aos ficheiros. É uma boa ideia fazer "
#| "<citerefentry> <refentrytitle><filename>apt-transport-debtorrent</"
#| "filename></refentrytitle> <manvolnum>1</manvolnum></citerefentry>."
msgid ""
-"APT can be extended with more methods shipped in other optional packages "
-"which should follow the nam
eing scheme <package>apt-transport-"
-"<replaceable>method</replaceable></package>. The APT team e.g. maintains "
-"also the <package>apt-transport-https</package> package which provides "
-"access methods for https-URIs with features similar to the http method, but "
-"other methods for using e.g. debtorrent are also available, see &apt-"
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
"transport-debtorrent;."
msgstr ""
"O APT pode ser estendido com mais métodos lançados em outros pacotes "
#. type: Content of: <refentry><refsect1><para>
#: apt-sortpkgs.1.xml:39
msgid ""
-"<command>apt-sortpkgs</command> will take an index file (Source index or "
-"Package index) and sort the records so that they are ordered by the package "
+"<command>apt-sortpkgs</command> will take an index file (source index or "
+"package index) and sort the records so that they are ordered by the package "
"name. It will also sort the internal fields of each record according to the "
"internal sorting rules."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#: apt-sortpkgs.1.xml:45
-msgid "All output is sent to stdout, the input must be a seekable file."
+#, fuzzy
+#| msgid "All output is sent to stdout, the input must be a seekable file."
+msgid ""
+"All output is sent to standard output; the input must be a seekable file."
msgstr ""
"Todas as saídas são enviadas para o stdout, a entrada tem de ser um ficheiro "
"pesquisável."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-sortpkgs.1.xml:54
msgid ""
-"Use Source index field ordering. Configuration Item: <literal>APT::"
+"Use source index field ordering. Configuration Item: <literal>APT::"
"SortPkgs::Source</literal>."
msgstr ""
"Usa ordenação de campo de índice Source. Item de Configuração: <literal>APT::"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml:184
msgid ""
-"Sets the default compression schemes to use for the Package index files. It "
+"Sets the default compression schemes to use for the package index files. It "
"is a string that contains a space separated list of at least one of: '.' (no "
"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
"'. gzip'."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml:307
msgid ""
-"Sets the output Contents file. Defaults to <filename>$(DIST)/Contents-$(ARCH)"
+"Sets the output Contents file. Defaults to <filename>$(DIST)/$(SECTION)/Contents-$(ARCH)"
"</filename>. If this setting causes multiple Packages files to map onto a "
"single Contents file (as is the default) then <command>apt-ftparchive</"
"command> will integrate those package files together automatically."
msgid "Which will use the already fetched archives on the disc."
msgstr "O qual irá usar os arquivos já obtidos e que estão no disco."
+#~ msgid "Package resource list for APT"
+#~ msgstr "Lista de recursos de pacote para APT"
+
+#~ msgid ""
+#~ "As the configuration can be deferred to be done at the end by &dpkg; it "
+#~ "can be tried to order the unpack series only by critical needs, e.g. by "
+#~ "Pre-Depends. Default is true and therefore the \"old\" method of ordering "
+#~ "in various steps by everything. While both method were present in earlier "
+#~ "APT versions the <literal>OrderCritical</literal> method was unused, so "
+#~ "this method is very experimental and needs further improvements before "
+#~ "becoming really useful."
+#~ msgstr ""
+#~ "Como a configuração pode ser diferida a ser feita no final pelo &dpkg;, "
+#~ "pode ser tentada a ordenar a série de desempacotamento apenas por "
+#~ "necessidades críticas, ex. por pré-dependências. A predefinição é "
+#~ "verdadeiro e então o método \"antigo\" de ordenar em vários passos por "
+#~ "tudo. Enquanto ambos os métodos estão presentes em versões jovens do APT, "
+#~ "o método <literal>OrderCritical</literal> não foi usado, portanto este "
+#~ "método é muito experimental e necessita de mais melhorias antes de se "
+#~ "tornar realmente útil."
+
+#~ msgid "Dump the default configuration to standard error on startup."
+#~ msgstr ""
+#~ "Despeja a configuração predefinida para o erro standard no arranque."
+
+#~ msgid ""
+#~ "Defaults to on which will cause APT to install essential and important "
+#~ "packages as fast as possible in the install/upgrade operation. This is "
+#~ "done to limit the effect of a failing &dpkg; call: If this option is "
+#~ "disabled APT does treat an important package in the same way as an extra "
+#~ "package: Between the unpacking of the important package A and his "
+#~ "configuration can then be many other unpack or configuration calls, e.g. "
+#~ "for package B which has no relation to A, but causes the dpkg call to "
+#~ "fail (e.g. because maintainer script of package B generates an error) "
+#~ "which results in a system state in which package A is unpacked but "
+#~ "unconfigured - each package depending on A is now no longer guaranteed to "
+#~ "work as their dependency on A is not longer satisfied. The immediate "
+#~ "configuration marker is also applied to all dependencies which can "
+#~ "generate a problem if the dependencies e.g. form a circle as a dependency "
+#~ "with the immediate flag is comparable with a Pre-Dependency. So in theory "
+#~ "it is possible that APT encounters a situation in which it is unable to "
+#~ "perform immediate configuration, errors out and refers to this option so "
+#~ "the user can deactivate the immediate configuration temporarily to be "
+#~ "able to perform an install/upgrade again. Note the use of the word "
+#~ "\"theory\" here as this problem was only encountered by now in real world "
+#~ "a few times in non-stable distribution versions and was caused by wrong "
+#~ "dependencies of the package in question or by a system in an already "
+#~ "broken state, so you should not blindly disable this option as the "
+#~ "mentioned scenario above is not the only problem immediate configuration "
+#~ "can help to prevent in the first place. Before a big operation like "
+#~ "<literal>dist-upgrade</literal> is run with this option disabled it "
+#~ "should be tried to explicitly <literal>install</literal> the package APT "
+#~ "is unable to configure immediately, but please make sure to report your "
+#~ "problem also to your distribution and to the APT team with the buglink "
+#~ "below so they can work on improving or correcting the upgrade process."
+#~ msgstr ""
+#~ "A predefinição é ligado o que irá fazer com que o APT instale pacotes "
+#~ "essenciais e importantes o mais rápido possível na operação de instalar/"
+#~ "actualizar. Isto é feito para limitar o efeito de uma chamada falhada do "
+#~ "&dpkg;. Se esta opção for desactivada, o APT trata um pacote importante "
+#~ "do mesmo modo que um pacote extra: Entre o desempacotamento do pacote "
+#~ "importante A e a sua configuração podem acontecer muitas outras chamadas "
+#~ "de desempacotamento e configuração, exemplo, para o pacote B que não tem "
+#~ "nenhuma relação com A, mas causa uma falha na chamada ao dpkg (ex, porque "
+#~ "o script do responsável do pacote B gera um erro) o qual resulta num "
+#~ "estado do sistema em que o pacote A está desempacotado mas ainda não "
+#~ "configurado - já não se garante o funcionamento de cada pacote que "
+#~ "depende de A porque a sua dependência já não está satisfeita. O marcador "
+#~ "de configuração imediata é também aplicado a todas as dependências que "
+#~ "possam gerar um problema se as dependências, ex, formam um círculo como "
+#~ "uma dependência com a marca de imediato a ser comparável com uma Pré-"
+#~ "Dependência. Portanto, em teoria, é possível que o APT encontre uma "
+#~ "situação na qual é incapaz de executar configuração imediata, entre em "
+#~ "erro e refira esta opção para que o utilizador possa desactivar "
+#~ "temporariamente a configuração imediata para ser capaz de executar uma "
+#~ "instalação/actualização outra vez. Note o uso da palavra \"teoria\" aqui "
+#~ "pois este problema foi poucas vezes encontrado até agora no mundo real em "
+#~ "versões de distribuição não-estáveis e causados por dependências erradas "
+#~ "do pacote em questão ou por um sistema já num estado corrompido, portanto "
+#~ "você não deve desactivar esta opção às cegas porque, em primeiro lugar, o "
+#~ "cenário mencionado acima não é o único problema que a configuração "
+#~ "imediata pode ajudar a prevenir. Antes de uma grande operação como "
+#~ "<literal>dist-upgrade</literal> ser corrida com esta opção desactivada, "
+#~ "deve ser tentado primeiro fazer um <literal>install</literal> explicito "
+#~ "ao pacote que o APT é incapaz de configurar imediatamente, mas por favor "
+#~ "certifique-se de também relatar o seu problema à sua distribuição e à "
+#~ "equipa do APT com o link de bug abaixo para que possam trabalhar na "
+#~ "melhoria ou correcção do processo de actualização."
+
+#~ msgid ""
+#~ "The package resource list is used to locate archives of the package "
+#~ "distribution system in use on the system. At this time, this manual page "
+#~ "documents only the packaging system used by the Debian system. This "
+#~ "control file is <filename>/etc/apt/sources.list</filename>."
+#~ msgstr ""
+#~ "A lista de recursos de pacote é usada para localizar arquivos do sistema "
+#~ "de distribuição de pacotes usado no sistema. Neste momento, este manual "
+#~ "documenta apenas o sistema de pacotes usado pelo sistema Debian. Este "
+#~ "ficheiro de controle é <filename>/etc/apt/sources.list</filename>."
+
+#~ msgid ""
+#~ "The source list is designed to support any number of active sources and a "
+#~ "variety of source media. The file lists one source per line, with the "
+#~ "most preferred source listed first. The format of each line is: "
+#~ "<literal>type uri args</literal> The first item, <literal>type</literal> "
+#~ "determines the format for <literal>args</literal>. <literal>uri</literal> "
+#~ "is a Universal Resource Identifier (URI), which is a superset of the more "
+#~ "specific and well-known Universal Resource Locator, or URL. The rest of "
+#~ "the line can be marked as a comment by using a #."
+#~ msgstr ""
+#~ "A lista de fontes é desenhada para suportar qualquer número de fontes "
+#~ "activas e uma variedade de médias fonte. O ficheiro lista uma fonte por "
+#~ "linha, com a fonte mais preferida listada em primeiro lugar. O formato "
+#~ "para cada linha é: <literal>tipo uri argumentos</literal>. O primeiro "
+#~ "item, <literal>tipo</literal> determina o formato para "
+#~ "<literal>argumentos</literal>. <literal>uri</literal> é um Universal "
+#~ "Resource Identifier (URI), o que é um super-conjunto para o mais "
+#~ "específico e conhecido Universal Resource Locator, ou URL. O resto da "
+#~ "linha pode ser marcado como um comentário usando um #."
+
#~ msgid ""
#~ "<literal>gencaches</literal> performs the same operation as <command>apt-"
#~ "get check</command>. It builds the source and package caches from the "
projects / apt.git / blobdiff