In the following we use the term **architecture qualified package name**
(or *arch-qualified package names* for short) to refer to package
-identifiers of the form "arch:package" where "arch" is a dpkg
-architecture and "package" a dpkg package name.
+identifiers of the form "package:arch" where "package" is a package name
+and "arch" a dpkg architecture.
## Components
- **APT::Solver**: the name of the solver to be used for
dependency solving. Defaults to `internal`
+- **Dir::Bin::Solvers**: absolute path of the directory where to look for
+ external solvers. Defaults to `/usr/lib/apt/solvers`.
+
- **APT::Solver::Strict-Pinning**: whether pinning must be strictly
respected (as the internal solver does) or can be slightly deviated
from. Defaults to `yes`.
-- **APT::Solver::NAME::Preferences** (where NAME is a solver name):
- solver-specific user preference string used during dependency solving,
- when the solver NAME is in use. Check solver-specific documentation
- for what is supported here. Defaults to the empty string.
+- **APT::Solver::Preferences**: user preference string used during
+ dependency solving by the requested solver. Check the documentation
+ of the solver you are using if and what is supported as a value here.
+ Defaults to the empty string.
+
+- **APT::Solver::RunAsUser**: if APT itself is run as root it will
+ change to this user before executing the solver. Defaults to the value
+ of APT::Sandbox::User, which itself defaults to `_apt`. Can be
+ disabled by set this option to `root`.
+
+The options **Strict-Pinning** and **Preferences** can also be set for
+a specific solver only via **APT::Solver::NAME::Strict-Pinning** and
+**APT::Solver::NAME::Preferences** respectively where `NAME` is the name
+of the external solver this option should apply to. These options if set
+override the generic options; for simplicity the documentation will
+refer only to the generic options.
-- **Dir::Bin::Solvers**: absolute path of the directory where to look for
- external solvers. Defaults to `/usr/lib/apt/solvers`.
## Protocol
Install. This field denotes a list of packages that the user wants to
remove, usually via APT `remove` or `purge` requests.
-- **Upgrade:** (optional, defaults to `no`). Allowed values: `yes`,
+- **Upgrade-All:** (optional, defaults to `no`). Allowed values `yes`,
`no`. When set to `yes`, an upgrade of all installed packages has been
- requested, usually via an APT `upgrade` request.
-
-- **Dist-Upgrade:** (optional, defaults to `no`). Allowed values: `yes`,
- `no`. Same as Upgrade, but for APT `dist-upgrade` requests.
+ requested, usually via an upgrade command like 'apt full-upgrade'.
- **Autoremove:** (optional, defaults to `no`). Allowed values: `yes`,
`no`. When set to `yes`, a clean up of unused automatically installed
packages has been requested, usually via an APT `autoremove` request.
+- **Upgrade:** (deprecated, optional, defaults to `no`). Allowed values:
+ `yes`, `no`. When set to `yes`, an upgrade of all installed packages
+ has been requested, usually via an APT `upgrade` request. A value of
+ `yes` is equivalent to the fields `Upgrade-All`,
+ `Forbid-New-Install`and `Forbid-Remove` all set to `yes`.
+
+- **Dist-Upgrade:** (deprecated, optional, defaults to `no`). Allowed
+ values: `yes`, `no`. Same as Upgrade, but for APT `dist-upgrade`
+ requests. A value of `yes` is equivalent to the field `Upgrade-All`
+ set to `yes` and the fields `Forbid-New-Install`and `Forbid-Remove`
+ set to `no`.
+
The following **preference fields** are supported in request stanzas:
- **Strict-Pinning:** (optional, defaults to `yes`). Allowed values:
field comes from the `APT::Solver::Strict-Pinning` configuration
option.
-- **Preferences:** a solver-specific optimization string, usually coming
- from the `APT::Solver::Preferences` configuration option.
+- **Forbid-New-Install:* (optional, defaults to `no`). Allowed values:
+ `yes`, `no`. When set to `yes` the resolver is forbidden to install
+ new packages in its returned solution.
+
+- **Forbid-Remove:* (optional, defaults to `no`). Allowed values: `yes`,
+ `no`. When set to `yes` the resolver is forbidden to remove currently
+ installed packages in its returned solution.
+
+- **Solver:** (optional, defaults to the empty string) a purely
+ informational string specifying to which solver this request was send
+ initially.
+
+- **Preferences:** (optional, defaults to the empty string)
+ a solver-specific optimization string, usually coming from the
+ `APT::Solver::Preferences` configuration option.
#### Package universe
- **APT-Candidate:** (optional, defaults to `no`). Allowed values:
`yes`, `no`. When set to `yes`, the corresponding package is the APT
candidate for installation among all available packages with the same
- name and with the same architecture.
+ name and architecture.
- **APT-Automatic:** (optional, defaults to `no`). Allowed values:
`yes`, `no`. When set to `yes`, the corresponding package is marked by
Release file entry (Origin, Label, Codename, etc.) in the format of
APT_PREFERENCES(5).
+- **Source:** (optional) The name of the source package the binary
+ package this record is for was built from.
+ This field does NOT include the version of the source package unlike
+ the Source field in the dpkg database. The version is optionally
+ available in the **Source-Version:** field.
+
+
### Answer
An answer from the external solver to APT is either a *solution* or an
The following invariant on **exit codes** must hold true. When the
external solver is *able to find a solution*, it will write the solution
to standard output and then exit with an exit code of 0. When the
-external solver is *unable to find a solution* (and s aware of that), it
-will write an error to standard output and then exit with an exit code
-of 0. An exit code other than 0 will be interpreted as a solver crash
-with no meaningful error about dependency resolution to convey to the
-user.
+external solver is *unable to find a solution* (and is aware of that),
+it will write an error to standard output and then exit with an exit
+code of 0. An exit code other than 0 will be interpreted as a solver
+crash with no meaningful error about dependency resolution to convey to
+the user.
#### Solution
-A solution is a list of Deb 822 stanzas. Each of them could be an
-install stanza (telling APT to install a specific package), a remove
-stanza (telling APT to remove one), or an autoremove stanza (telling APT
-about the *future* possibility of removing a package using the
-Autoremove action).
+A solution is a list of Deb 822 stanzas. Each of them could be an install
+stanza (telling APT to install a specific new package or to upgrade or
+downgrade a package to a specific version), a remove stanza (telling APT to
+remove one), or an autoremove stanza (telling APT about the *future*
+possibility of removing a package using the Autoremove action).
An **install stanza** starts with an Install field and supports the
following fields:
invocation of an Autoremove action will actually remove the very same
packages indicated by Autoremove stanzas in the former solution.
+A package can't be installed in multiple versions at the same time, so
+for each package there can at most one version be selected either for
+installation or removal. This especially means that a solver is neither
+allowed to represent package upgrades as a remove of the installed
+version and the installation of another (the remove is implicit and must
+be omitted from the solution) nor is it supported to revert previous
+actions in the solution with later actions. APT is allowed to show
+warnings and might even misbehave in earlier versions if a solver is
+violating this assumption.
+
In terms of expressivity, install and remove stanzas can carry one
single field each, as APT-IDs are enough to pinpoint packages to be
installed/removed. Nonetheless, for protocol readability, it is
with the Progress field and might contain the following fields:
- **Progress:** (mandatory). The value of this field is a date and time
- timestamp, in RFC 2822 format. The timestamp provides a time
- annotation for the progress report.
+ timestamp from the UTC timezone, in RFC 2822 format (see 'date -uR' as
+ an example). The timestamp provides a time annotation for the
+ progress report.
- **Percentage:** (optional). An integer from 0 to 100, representing the
completion of the dependency solving process, as declared by the
projects / apt.git / blobdiff