+#. type: <p></p>
+#: guide.sgml:222
+msgid ""
+"The distribution refers to the Debian version in the archive, <em>stable</"
+"em> refers to the latest released version and <em>unstable</em> refers to "
+"the developmental version. <em>non-US</em> is only available on some mirrors "
+"and refers to packages that contain encryption technology or other things "
+"that cannot be exported from the United States. Importing these packages "
+"into the US is legal however."
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:228
+#, no-wrap
+msgid ""
+" Please give the components to get\n"
+" The components are typically something like: main contrib non-free\n"
+" \n"
+" Components [main contrib non-free]:"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:236
+msgid ""
+"The components list refers to the list of sub distributions to fetch. The "
+"distribution is split up based on software licenses, main being DFSG free "
+"packages while contrib and non-free contain things that have various "
+"restrictions placed on their use and distribution."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:240
+msgid ""
+"Any number of sources can be added, the setup script will continue to prompt "
+"until you have specified all that you want."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:247
+msgid ""
+"Before starting to use <prgn>dselect</prgn> it is necessary to update the "
+"available list by selecting [U]pdate from the menu. This is a superset of "
+"<tt>apt-get update</tt> that makes the fetched information available to "
+"<prgn>dselect</prgn>. [U]pdate must be performed even if <tt>apt-get update</"
+"tt> has been run before."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:253
+msgid ""
+"You can then go on and make your selections using [S]elect and then perform "
+"the installation using [I]nstall. When using the APT method the [C]onfig and "
+"[R]emove commands have no meaning, the [I]nstall command performs both of "
+"them together."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:258
+msgid ""
+"By default APT will automatically remove the package (.deb) files once they "
+"have been successfully installed. To change this behavior place <tt>Dselect::"
+"clean \"prompt\";</tt> in /etc/apt/apt.conf."
+msgstr ""
+
+# type: <tag></tag>
+#. type: <heading></heading>
+#: guide.sgml:264
+#, fuzzy
+msgid "The Interface"
+msgstr "メソッドインスタンス"
+
+#. type: <p></p>
+#: guide.sgml:278
+msgid ""
+"Both that APT <prgn>dselect</prgn> method and <prgn>apt-get</prgn> share the "
+"same interface. It is a simple system that generally tells you what it will "
+"do and then goes and does it. <footnote><p>The <prgn>dselect</prgn> method "
+"actually is a set of wrapper scripts to <prgn>apt-get</prgn>. The method "
+"actually provides more functionality than is present in <prgn>apt-get</prgn> "
+"alone.</p></footnote> After printing out a summary of what will happen APT "
+"then will print out some informative status messages so that you can "
+"estimate how far along it is and how much is left to do."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:280
+msgid "Startup"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:284
+msgid ""
+"Before all operations except update, APT performs a number of actions to "
+"prepare its internal state. It also does some checks of the system's state. "
+"At any time these operations can be performed by running <tt>apt-get check</"
+"tt>."
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:289
+#, no-wrap
+msgid ""
+"# apt-get check\n"
+"Reading Package Lists... Done\n"
+"Building Dependency Tree... Done"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:297
+msgid ""
+"The first thing it does is read all the package files into memory. APT uses "
+"a caching scheme so this operation will be faster the second time it is run. "
+"If some of the package files are not found then they will be ignored and a "
+"warning will be printed when apt-get exits."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:303
+msgid ""
+"The final operation performs a detailed analysis of the system's "
+"dependencies. It checks every dependency of every installed or unpacked "
+"package and considers if it is OK. Should this find a problem then a report "
+"will be printed out and <prgn>apt-get</prgn> will refuse to run."
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:320
+#, no-wrap
+msgid ""
+"# apt-get check\n"
+"Reading Package Lists... Done\n"
+"Building Dependency Tree... Done\n"
+"You might want to run apt-get -f install' to correct these.\n"
+"Sorry, but the following packages have unmet dependencies:\n"
+" 9fonts: Depends: xlib6g but it is not installed\n"
+" uucp: Depends: mailx but it is not installed\n"
+" blast: Depends: xlib6g (>= 3.3-5) but it is not installed\n"
+" adduser: Depends: perl-base but it is not installed\n"
+" aumix: Depends: libgpmg1 but it is not installed\n"
+" debiandoc-sgml: Depends: sgml-base but it is not installed\n"
+" bash-builtins: Depends: bash (>= 2.01) but 2.0-3 is installed\n"
+" cthugha: Depends: svgalibg1 but it is not installed\n"
+" Depends: xlib6g (>= 3.3-5) but it is not installed\n"
+" libreadlineg2: Conflicts:libreadline2 (<< 2.1-2.1)"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:329
+msgid ""
+"In this example the system has many problems, including a serious problem "
+"with libreadlineg2. For each package that has unmet dependencies a line is "
+"printed out indicating the package with the problem and the dependencies "
+"that are unmet. A short explanation of why the package has a dependency "
+"problem is also included."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:337
+msgid ""
+"There are two ways a system can get into a broken state like this. The first "
+"is caused by <prgn>dpkg</prgn> missing some subtle relationships between "
+"packages when performing upgrades. <footnote><p>APT however considers all "
+"known dependencies and attempts to prevent broken packages</p></footnote>. "
+"The second is if a package installation fails during an operation. In this "
+"situation a package may have been unpacked without its dependents being "
+"installed."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:345
+msgid ""
+"The second situation is much less serious than the first because APT places "
+"certain constraints on the order that packages are installed. In both cases "
+"supplying the <tt>-f</tt> option to <prgn>apt-get</prgn> will cause APT to "
+"deduce a possible solution to the problem and then continue on. The APT "
+"<prgn>dselect</prgn> method always supplies the <tt>-f</tt> option to allow "
+"for easy continuation of failed maintainer scripts."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:351
+msgid ""
+"However, if the <tt>-f</tt> option is used to correct a seriously broken "
+"system caused by the first case then it is possible that it will either fail "
+"immediately or the installation sequence will fail. In either case it is "
+"necessary to manually use dpkg (possibly with forcing options) to correct "
+"the situation enough to allow APT to proceed."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:356
+msgid "The Status Report"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:363
+msgid ""
+"Before proceeding <prgn>apt-get</prgn> will present a report on what will "
+"happen. Generally the report reflects the type of operation being performed "
+"but there are several common elements. In all cases the lists reflect the "
+"final state of things, taking into account the <tt>-f</tt> option and any "
+"other relevant activities to the command being executed."
+msgstr ""
+
+# type: <tag></tag>
+#. type: <heading></heading>
+#: guide.sgml:364
+#, fuzzy
+msgid "The Extra Package list"
+msgstr "NextPackage"
+
+#. type: <example></example>
+#: guide.sgml:372
+#, no-wrap
+msgid ""
+"The following extra packages will be installed:\n"
+" libdbd-mysql-perl xlib6 zlib1 xzx libreadline2 libdbd-msql-perl\n"
+" mailpgp xdpkg fileutils pinepgp zlib1g xlib6g perl-base\n"
+" bin86 libgdbm1 libgdbmg1 quake-lib gmp2 bcc xbuffy\n"
+" squake pgp-i python-base debmake ldso perl libreadlineg2\n"
+" ssh"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:379
+msgid ""
+"The Extra Package list shows all of the packages that will be installed or "
+"upgraded in excess of the ones mentioned on the command line. It is only "
+"generated for an <tt>install</tt> command. The listed packages are often the "
+"result of an Auto Install."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:382
+msgid "The Packages to Remove"
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:389
+#, no-wrap
+msgid ""
+"The following packages will be REMOVED:\n"
+" xlib6-dev xpat2 tk40-dev xkeycaps xbattle xonix\n"
+" xdaliclock tk40 tk41 xforms0.86 ghostview xloadimage xcolorsel\n"
+" xadmin xboard perl-debug tkined xtetris libreadline2-dev perl-suid\n"
+" nas xpilot xfig"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:399
+msgid ""
+"The Packages to Remove list shows all of the packages that will be removed "
+"from the system. It can be shown for any of the operations and should be "
+"given a careful inspection to ensure nothing important is to be taken off. "
+"The <tt>-f</tt> option is especially good at generating packages to remove "
+"so extreme care should be used in that case. The list may contain packages "
+"that are going to be removed because they are only partially installed, "
+"possibly due to an aborted installation."
+msgstr ""
+
+# type: <tag></tag>
+#. type: <heading></heading>
+#: guide.sgml:402
+#, fuzzy
+msgid "The New Packages list"
+msgstr "NextPackage"
+
+#. type: <example></example>
+#: guide.sgml:406
+#, no-wrap
+msgid ""
+"The following NEW packages will installed:\n"
+" zlib1g xlib6g perl-base libgdbmg1 quake-lib gmp2 pgp-i python-base"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:411
+msgid ""
+"The New Packages list is simply a reminder of what will happen. The packages "
+"listed are not presently installed in the system but will be when APT is "
+"done."
+msgstr ""
+
+# type: <tag></tag>
+#. type: <heading></heading>
+#: guide.sgml:414
+#, fuzzy
+msgid "The Kept Back list"
+msgstr "NextPackage"
+
+#. type: <example></example>
+#: guide.sgml:419
+#, no-wrap
+msgid ""
+"The following packages have been kept back\n"
+" compface man-db tetex-base msql libpaper svgalib1\n"
+" gs snmp arena lynx xpat2 groff xscreensaver"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:428
+msgid ""
+"Whenever the whole system is being upgraded there is the possibility that "
+"new versions of packages cannot be installed because they require new things "
+"or conflict with already installed things. In this case the package will "
+"appear in the Kept Back list. The best way to convince packages listed there "
+"to install is with <tt>apt-get install</tt> or by using <prgn>dselect</prgn> "
+"to resolve their problems."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:431
+msgid "Held Packages warning"
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:435
+#, no-wrap
+msgid ""
+"The following held packages will be changed:\n"
+" cvs"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:441
+msgid ""
+"Sometimes you can ask APT to install a package that is on hold, in such a "
+"case it prints out a warning that the held package is going to be changed. "
+"This should only happen during dist-upgrade or install."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:444
+msgid "Final summary"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:447
+msgid ""
+"Finally, APT will print out a summary of all the changes that will occur."
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:452
+#, no-wrap
+msgid ""
+"206 packages upgraded, 8 newly installed, 23 to remove and 51 not upgraded.\n"
+"12 packages not fully installed or removed.\n"
+"Need to get 65.7M/66.7M of archives. After unpacking 26.5M will be used."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:470
+msgid ""
+"The first line of the summary simply is a reduced version of all of the "
+"lists and includes the number of upgrades - that is packages already "
+"installed that have new versions available. The second line indicates the "
+"number of poorly configured packages, possibly the result of an aborted "
+"installation. The final line shows the space requirements that the "
+"installation needs. The first pair of numbers refer to the size of the "
+"archive files. The first number indicates the number of bytes that must be "
+"fetched from remote locations and the second indicates the total size of all "
+"the archives required. The next number indicates the size difference between "
+"the presently installed packages and the newly installed packages. It is "
+"roughly equivalent to the space required in /usr after everything is done. "
+"If a large number of packages are being removed then the value may indicate "
+"the amount of space that will be freed."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:473
+msgid ""
+"Some other reports can be generated by using the -u option to show packages "
+"to upgrade, they are similar to the previous examples."
+msgstr ""
+
+#. type: <heading></heading>
+#: guide.sgml:477
+msgid "The Status Display"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:481
+msgid ""
+"During the download of archives and package files APT prints out a series of "
+"status messages."
+msgstr ""
+
+#. type: <example></example>
+#: guide.sgml:490
+#, no-wrap
+msgid ""
+"# apt-get update\n"
+"Get:1 http://ftp.de.debian.org/debian-non-US/ stable/non-US/ Packages\n"
+"Get:2 http://llug.sep.bnl.gov/debian/ testing/contrib Packages\n"
+"Hit http://llug.sep.bnl.gov/debian/ testing/main Packages\n"
+"Get:4 http://ftp.de.debian.org/debian-non-US/ unstable/binary-i386/ Packages\n"
+"Get:5 http://llug.sep.bnl.gov/debian/ testing/non-free Packages\n"
+"11% [5 testing/non-free `Waiting for file' 0/32.1k 0%] 2203b/s 1m52s"
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:500
+msgid ""
+"The lines starting with <em>Get</em> are printed out when APT begins to "
+"fetch a file while the last line indicates the progress of the download. The "
+"first percent value on the progress line indicates the total percent done of "
+"all files. Unfortunately since the size of the Package files is unknown "
+"<tt>apt-get update</tt> estimates the percent done which causes some "
+"inaccuracies."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:509
+msgid ""
+"The next section of the status line is repeated once for each download "
+"thread and indicates the operation being performed and some useful "
+"information about what is happening. Sometimes this section will simply read "
+"<em>Forking</em> which means the OS is loading the download module. The "
+"first word after the [ is the fetch number as shown on the history lines. "
+"The next word is the short form name of the object being downloaded. For "
+"archives it will contain the name of the package that is being fetched."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:524
+msgid ""
+"Inside of the single quote is an informative string indicating the progress "
+"of the negotiation phase of the download. Typically it progresses from "
+"<em>Connecting</em> to <em>Waiting for file</em> to <em>Downloading</em> or "
+"<em>Resuming</em>. The final value is the number of bytes downloaded from "
+"the remote site. Once the download begins this is represented as "
+"<tt>102/10.2k</tt> indicating that 102 bytes have been fetched and 10.2 "
+"kilobytes is expected. The total size is always shown in 4 figure notation "
+"to preserve space. After the size display is a percent meter for the file "
+"itself. The second last element is the instantaneous average speed. This "
+"values is updated every 5 seconds and reflects the rate of data transfer for "
+"that period. Finally is shown the estimated transfer time. This is updated "
+"regularly and reflects the time to complete everything at the shown transfer "
+"rate."
+msgstr ""
+
+#. type: <p></p>
+#: guide.sgml:530
+msgid ""
+"The status display updates every half second to provide a constant feedback "
+"on the download progress while the Get lines scroll back whenever a new file "
+"is started. Since the status display is constantly updated it is unsuitable "
+"for logging to a file, use the <tt>-q</tt> option to remove the status "
+"display."
+msgstr ""
+
+# type: <heading></heading>
+#. type: <heading></heading>
+#: guide.sgml:535
+msgid "Dpkg"
+msgstr "Dpkg"
+
+#. type: <p></p>
+#: guide.sgml:542
+msgid ""
+"APT uses <prgn>dpkg</prgn> for installing the archives and will switch over "
+"to the <prgn>dpkg</prgn> interface once downloading is completed. "
+"<prgn>dpkg</prgn> will also ask a number of questions as it processes the "
+"packages and the packages themselves may also ask several questions. Before "
+"each question there is usually a description of what it is asking and the "
+"questions are too varied to discuss completely here."
+msgstr ""
+
+# type: <title></title>
+#. type: <title></title>
+#: offline.sgml:4
+msgid "Using APT Offline"
+msgstr "オフラインでの APT の使用法"
+
+#. type: <version></version>
+#: offline.sgml:7
+msgid "$Id: offline.sgml,v 1.8 2003/02/12 15:06:41 doogie Exp $"
+msgstr ""
+
+# type: <abstract></abstract>
+#. type: <abstract></abstract>
+#: offline.sgml:12
+msgid ""
+"This document describes how to use APT in a non-networked environment, "
+"specifically a 'sneaker-net' approach for performing upgrades."
+msgstr ""
+"このドキュメントはネットワークがない環境での APT の使用方法を説明しています。"
+"具体的には、アップグレード時に「スニーカーネット」アプローチです。"
+
+# type: <copyrightsummary></copyrightsummary>
+#. type: <copyrightsummary></copyrightsummary>
+#: offline.sgml:16
+msgid "Copyright © Jason Gunthorpe, 1999."
+msgstr "Copyright © Jason Gunthorpe, 1999."
+
+# type: Content of: <refentry><refsect1><title>
+#. type: <heading></heading>
+#: offline.sgml:32
+msgid "Introduction"
+msgstr "はじめに"
+
+#. type: <heading></heading>
+#: offline.sgml:34 offline.sgml:65 offline.sgml:180
+#, fuzzy
+msgid "Overview"
+msgstr "OverrideDir"
+
+#. type: <p></p>
+#: offline.sgml:40
+msgid ""
+"Normally APT requires direct access to a Debian archive, either from a local "
+"media or through a network. Another common complaint is that a Debian "
+"machine is on a slow link, such as a modem and another machine has a very "
+"fast connection but they are physically distant."
+msgstr ""
+
+#. type: <p></p>
+#: offline.sgml:51
+msgid ""
+"The solution to this is to use large removable media such as a Zip disc or a "
+"SuperDisk disc. These discs are not large enough to store the entire Debian "
+"archive but can easily fit a subset large enough for most users. The idea is "
+"to use APT to generate a list of packages that are required and then fetch "
+"them onto the disc using another machine with good connectivity. It is even "
+"possible to use another Debian machine with APT or to use a completely "
+"different OS and a download tool like wget. Let <em>remote host</em> mean "
+"the machine downloading the packages, and <em>target host</em> the one with "
+"bad or no connection."
+msgstr ""
+
+#. type: <p></p>
+#: offline.sgml:57
+msgid ""
+"This is achieved by creatively manipulating the APT configuration file. The "
+"essential premise to tell APT to look on a disc for it's archive files. Note "
+"that the disc should be formated with a filesystem that can handle long file "
+"names such as ext2, fat32 or vfat."
+msgstr ""
+
+# type: <title></title>
+#. type: <heading></heading>
+#: offline.sgml:63
+#, fuzzy
+msgid "Using APT on both machines"
+msgstr "オフラインでの APT の使用法"
+
+#. type: <p><example>
+#: offline.sgml:71
+msgid ""
+"APT being available on both machines gives the simplest configuration. The "
+"basic idea is to place a copy of the status file on the disc and use the "
+"remote machine to fetch the latest package files and decide which packages "
+"to download. The disk directory structure should look like:"
+msgstr ""
+
+# type: <example></example>
+#. type: <example></example>
+#: offline.sgml:80
+#, no-wrap
+msgid ""
+" /disc/\n"
+" archives/\n"
+" partial/\n"
+" lists/\n"
+" partial/\n"
+" status\n"
+" sources.list\n"
+" apt.conf"
+msgstr ""
+" /disc/\n"
+" archives/\n"
+" partial/\n"
+" lists/\n"
+" partial/\n"
+" status\n"
+" sources.list\n"
+" apt.conf"
+
+# type: Content of: <refentry><refsect1><title>
+#. type: <heading></heading>
+#: offline.sgml:88
+#, fuzzy
+msgid "The configuration file"
+msgstr "ユーザの設定"
+
+#. type: <p></p>
+#: offline.sgml:96
+msgid ""
+"The configuration file should tell APT to store its files on the disc and to "
+"use the configuration files on the disc as well. The sources.list should "
+"contain the proper sites that you wish to use from the remote machine, and "
+"the status file should be a copy of <em>/var/lib/dpkg/status</em> from the "
+"<em>target host</em>. Please note, if you are using a local archive you must "
+"use copy URIs, the syntax is identical to file URIs."
+msgstr ""
+
+#. type: <p><example>
+#: offline.sgml:100
+msgid ""
+"<em>apt.conf</em> must contain the necessary information to make APT use the "
+"disc:"
+msgstr ""
+
+# type: <example></example>
+#. type: <example></example>
+#: offline.sgml:124
+#, fuzzy, no-wrap
+msgid ""
+" APT\n"
+" {\n"
+" /* This is not necessary if the two machines are the same arch, it tells\n"
+" the remote APT what architecture the target machine is */\n"
+" Architecture \"i386\";\n"
+" \n"
+" Get::Download-Only \"true\";\n"
+" };\n"
+" \n"
+" Dir\n"
+" {\n"
+" /* Use the disc for state information and redirect the status file from\n"
+" the /var/lib/dpkg default */\n"
+" State \"/disc/\";\n"
+" State::status \"status\";\n"
+"\n"
+" // Binary caches will be stored locally\n"
+" Cache::archives \"/disc/archives/\";\n"
+" Cache \"/tmp/\";\n"
+" \n"
+" // Location of the source list.\n"
+" Etc \"/disc/\";\n"
+" };"
+msgstr ""
+" APT\n"
+" {\n"
+" /* This is not necessary if the two machines are the same arch, it tells\n"
+" the remote APT what architecture the Debian machine is */\n"
+" Architecture \"i386\";\n"
+" \n"
+" Get::Download-Only \"true\";\n"
+" };\n"
+" \n"
+" Dir\n"
+" {\n"
+" /* Use the disc for state information and redirect the status file from\n"
+" the /var/lib/dpkg default */\n"
+" State \"/disc/\";\n"
+" State::status \"status\";\n"
+"\n"
+" // Binary caches will be stored locally\n"
+" Cache::archives \"/disc/archives/\";\n"
+" Cache \"/tmp/\";\n"
+" \n"
+" // Location of the source list.\n"
+" Etc \"/disc/\";\n"
+" };"
+
+#. type: </example></p>
+#: offline.sgml:129
+msgid ""
+"More details can be seen by examining the apt.conf man page and the sample "
+"configuration file in <em>/usr/share/doc/apt/examples/apt.conf</em>."
+msgstr ""
+
+#. type: <p><example>
+#: offline.sgml:136
+msgid ""
+"On the target machine the first thing to do is mount the disc and copy <em>/"
+"var/lib/dpkg/status</em> to it. You will also need to create the directories "
+"outlined in the Overview, <em>archives/partial/</em> and <em>lists/partial/</"
+"em>. Then take the disc to the remote machine and configure the sources."
+"list. On the remote machine execute the following:"
+msgstr ""
+
+# type: <example></example>
+#. type: <example></example>
+#: offline.sgml:142
+#, fuzzy, no-wrap
+msgid ""
+" # export APT_CONFIG=\"/disc/apt.conf\"\n"
+" # apt-get update\n"
+" [ APT fetches the package files ]\n"
+" # apt-get dist-upgrade\n"
+" [ APT fetches all the packages needed to upgrade the target machine ]"
+msgstr ""
+" # export APT_CONFIG=\"/disc/apt.conf\"\n"
+" # apt-get update\n"
+" [ パッケージファイルを取得します ]\n"
+" # apt-get dist-upgrade\n"
+" [ アップグレードが必要な全パッケージを取得します ]"
+
+#. type: </example></p>
+#: offline.sgml:149
+msgid ""
+"The dist-upgrade command can be replaced with any other standard APT "
+"commands, particularly dselect-upgrade. You can even use an APT front end "
+"such as <em>dselect</em>. However this presents a problem in communicating "
+"your selections back to the local computer."
+msgstr ""
+
+#. type: <p><example>
+#: offline.sgml:153
+msgid ""
+"Now the disc contains all of the index files and archives needed to upgrade "
+"the target machine. Take the disc back and run:"
+msgstr ""
+
+# type: <example></example>
+#. type: <example></example>
+#: offline.sgml:159
+#, fuzzy, no-wrap
+msgid ""
+" # export APT_CONFIG=\"/disc/apt.conf\"\n"
+" # apt-get check\n"
+" [ APT generates a local copy of the cache files ]\n"
+" # apt-get --no-d -o dir::state::status=/var/lib/dpkg/status dist-upgrade\n"
+" [ Or any other APT command ]"
+msgstr ""
+" # export APT_CONFIG=\"/disc/apt.conf\"\n"
+" # apt-get update\n"
+" [ パッケージファイルを取得します ]\n"
+" # apt-get dist-upgrade\n"
+" [ アップグレードが必要な全パッケージを取得します ]"
+
+#. type: <p></p>
+#: offline.sgml:165
+msgid ""
+"It is necessary for proper function to re-specify the status file to be the "
+"local one. This is very important!"
+msgstr ""
+
+#. type: <p></p>
+#: offline.sgml:172
+msgid ""
+"If you are using dselect you can do the very risky operation of copying disc/"
+"status to /var/lib/dpkg/status so that any selections you made on the remote "
+"machine are updated. I highly recommend that people only make selections on "
+"the local machine - but this may not always be possible. DO NOT copy the "
+"status file if dpkg or APT have been run in the mean time!!"
+msgstr ""
+
+# type: <title></title>
+#. type: <heading></heading>
+#: offline.sgml:178
+#, fuzzy
+msgid "Using APT and wget"
+msgstr "オフラインでの APT の使用法"
+
+#. type: <p></p>
+#: offline.sgml:185
+msgid ""
+"<em>wget</em> is a popular and portable download tool that can run on nearly "
+"any machine. Unlike the method above this requires that the Debian machine "
+"already has a list of available packages."
+msgstr ""
+
+#. type: <p></p>
+#: offline.sgml:190
+msgid ""
+"The basic idea is to create a disc that has only the archive files "
+"downloaded from the remote site. This is done by using the --print-uris "
+"option to apt-get and then preparing a wget script to actually fetch the "
+"packages."
+msgstr ""
+
+# type: Content of: <refentry><refsect1><title>
+#. type: <heading></heading>
+#: offline.sgml:196
+#, fuzzy
+msgid "Operation"
+msgstr "オプション"
+
+#. type: <p><example>
+#: offline.sgml:200
+msgid ""
+"Unlike the previous technique no special configuration files are required. "
+"We merely use the standard APT commands to generate the file list."
+msgstr ""
+
+#. type: <example></example>
+#: offline.sgml:205
+#, no-wrap
+msgid ""
+" # apt-get dist-upgrade \n"
+" [ Press no when prompted, make sure you are happy with the actions ]\n"
+" # apt-get -qq --print-uris dist-upgrade > uris\n"
+" # awk '{print \"wget -O \" $2 \" \" $1}' < uris > /disc/wget-script"
+msgstr ""
+
+#. type: </example></p>
+#: offline.sgml:210
+msgid ""
+"Any command other than dist-upgrade could be used here, including dselect-"
+"upgrade."
+msgstr ""
+
+#. type: <p></p>
+#: offline.sgml:216
+msgid ""
+"The /disc/wget-script file will now contain a list of wget commands to "
+"execute in order to fetch the necessary archives. This script should be run "
+"with the current directory as the disc's mount point so as to save the "
+"output on the disc."
+msgstr ""
+
+#. type: <p><example>
+#: offline.sgml:219
+msgid "The remote machine would do something like"
+msgstr ""
+
+#. type: <example></example>
+#: offline.sgml:223
+#, no-wrap
+msgid ""
+" # cd /disc\n"
+" # sh -x ./wget-script\n"
+" [ wait.. ]"
+msgstr ""
+
+#. type: </example><example>
+#: offline.sgml:228
+msgid ""
+"Once the archives are downloaded and the disc returned to the Debian machine "
+"installation can proceed using,"
+msgstr ""
+
+#. type: <example></example>
+#: offline.sgml:230
+#, no-wrap
+msgid " # apt-get -o dir::cache::archives=\"/disc/\" dist-upgrade"
+msgstr ""
+
+#. type: </example></p>
+#: offline.sgml:234
+msgid "Which will use the already fetched archives on the disc."
+msgstr ""
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid ""
+#~ "<filename>apt.conf</filename> is the main configuration file for the APT "
+#~ "suite of tools, all tools make use of the configuration file and a common "
+#~ "command line parser to provide a uniform environment. When an APT tool "
+#~ "starts up it will read the configuration specified by the "
+#~ "<envar>APT_CONFIG</envar> environment variable (if any) and then read the "
+#~ "files in <literal>Dir::Etc::Parts</literal> then read the main "
+#~ "configuration file specified by <literal>Dir::Etc::main</literal> then "
+#~ "finally apply the command line options to override the configuration "
+#~ "directives, possibly loading even more config files."
+#~ msgstr ""
+#~ "<filename>apt.conf</filename> は、APT ツール集のメイン設定ファイルです。こ"
+#~ "の設定ファイルと共通のコマンドラインパーサを使って、すべてのツールを統一環"
+#~ "境で使用できます。APT ツールの起動時には、<envar>APT_CONFIG</envar> 環境変"
+#~ "数に指定した設定を (存在すれば) 読み込みます。次に <literal>Dir::Etc::"
+#~ "Parts</literal> のファイルを読み込みます。次に <literal>Dir::Etc::main</"
+#~ "literal> で指定した主設定ファイルを読み込み、最後にコマンドラインオプショ"
+#~ "ンで、設定ファイルより取得した値を上書きします。"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>/etc/apt/trusted.gpg</filename>"
+#~ msgstr "<filename>/etc/apt/trusted.gpg</filename>"
+
+# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#~ msgid "Keyring of local trusted keys, new keys will be added here."
+#~ msgstr "ローカル信頼キーのキーリング。新しいキーはここに追加されます。"
+
+# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#~ msgid ""
+#~ "Disable Immediate Configuration; This dangerous option disables some of "
+#~ "APT's ordering code to cause it to make fewer dpkg calls. Doing so may be "
+#~ "necessary on some extremely slow single user systems but is very "
+#~ "dangerous and may cause package install scripts to fail or worse. Use at "
+#~ "your own risk."
+#~ msgstr ""
+#~ "即時設定無効 - この危険なオプションは、APT の要求コードを無効にして dpkg "
+#~ "の呼び出しをほとんどしないようにします。これは、非常に遅いシングルユーザシ"
+#~ "ステムでは必要かもしれませんが、非常に危険で、パッケージのインストールスク"
+#~ "リプトが失敗したり、もしくはもっと悪いことがおきるかもしれません。自己責任"
+#~ "で使用してください。"
+
+# type: Content of: <refentry><refnamediv><refname>
+#, fuzzy
+#~ msgid "NoConfigure"
+#~ msgstr "config-files"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>/etc/apt/sources.list</filename>"
+#~ msgstr "<filename>/etc/apt/sources.list</filename>"
+
+# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#~ msgid ""
+#~ "Locations to fetch packages from. Configuration Item: <literal>Dir::Etc::"
+#~ "SourceList</literal>."
+#~ msgstr ""
+#~ "パッケージの取得元。設定項目 - <literal>Dir::Etc::SourceList</literal>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>&statedir;/lists/</filename>"
+#~ msgstr "<filename>&statedir;/lists/</filename>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>&statedir;/lists/partial/</filename>"
+#~ msgstr "<filename>&statedir;/lists/partial/</filename>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>/etc/apt/apt.conf</filename>"
+#~ msgstr "<filename>/etc/apt/apt.conf</filename>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>/etc/apt/apt.conf.d/</filename>"
+#~ msgstr "<filename>/etc/apt/apt.conf.d/</filename>"
+
+# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#~ msgid ""
+#~ "APT configuration file fragments. Configuration Item: <literal>Dir::Etc::"
+#~ "Parts</literal>."
+#~ msgstr ""
+#~ "APT 設定ファイルの断片。設定項目 - <literal>Dir::Etc::Parts</literal>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>&cachedir;/archives/</filename>"
+#~ msgstr "<filename>&cachedir;/archives/</filename>"
+
+# type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#~ msgid ""
+#~ "Storage area for retrieved package files. Configuration Item: "
+#~ "<literal>Dir::Cache::Archives</literal>."
+#~ msgstr ""
+#~ "取得済みパッケージファイル格納エリア。設定項目 - <literal>Dir::Cache::"
+#~ "Archives</literal>"
+
+# type: Content of: <refentry><refsect1><para>
+#~ msgid "<filename>&cachedir;/archives/partial/</filename>"
+#~ msgstr "<filename>&cachedir;/archives/partial/</filename>"
+
+# type: <copyrightsummary></copyrightsummary>
+#~ msgid "Copyright © Jason Gunthorpe, 1997-1998."
+#~ msgstr "Copyright © Jason Gunthorpe, 1997-1998."
+
+# type: Content of: <refentry><refnamediv><refpurpose>
+#, fuzzy
+#~ msgid "Note on Pointer access"
+#~ msgstr "APT パッケージ操作ユーティリティ -- キャッシュ操作"
+
+# type: <example></example>
+#~ msgid ""
+#~ " void *Map = mmap(...);\n"
+#~ " Package *PkgList = (Package *)Map;\n"
+#~ " Header *Head = (Header *)Map;\n"
+#~ " char *Strings = (char *)Map;\n"
+#~ " cout << (Strings + PkgList[Head->HashTable[0]]->Name) << endl;"
+#~ msgstr ""
+#~ " void *Map = mmap(...);\n"
+#~ " Package *PkgList = (Package *)Map;\n"
+#~ " Header *Head = (Header *)Map;\n"
+#~ " char *Strings = (char *)Map;\n"
+#~ " cout << (Strings + PkgList[Head->HashTable[0]]->Name) << endl;"
+
+# type: <heading></heading>
+#~ msgid "Structures"
+#~ msgstr "構造"
+
+# type: <heading></heading>
+#~ msgid "Header"
+#~ msgstr "ヘッダ"
+
+# type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#, fuzzy
+#~ msgid "This is the first item in the file."
+#~ msgstr "ファイル一覧ファイルを指定します。"
+
+# type: <example></example>
+#~ msgid ""
+#~ " struct Header\n"
+#~ " {\n"
+#~ " // Signature information\n"
+#~ " unsigned long Signature;\n"
+#~ " short MajorVersion;\n"
+#~ " short MinorVersion;\n"
+#~ " bool Dirty;\n"
+#~ " \n"
+#~ " // Size of structure values\n"
+#~ " unsigned short HeaderSz;\n"
+#~ " unsigned short PackageSz;\n"
+#~ " unsigned short PackageFileSz;\n"
+#~ " unsigned short VersionSz;\n"
+#~ " unsigned short DependencySz;\n"
+#~ " unsigned short ProvidesSz;\n"
+#~ " unsigned short VerFileSz;\n"
projects / apt.git / blobdiff