msgtest() {
while [ -n "$1" ]; do
echo -n "${CINFO}$1${CCMD} "
- echo -n "$(echo "$2" | sed -e 's/^aptc/apt-c/' -e 's/^aptg/apt-g/' -e 's/^aptf/apt-f/')${CINFO} "
+ echo -n "$(echo "$2" | sed -e 's#^apt\([cgfs]\)#apt-\1#')${CINFO} "
shift
if [ -n "$1" ]; then shift; else break; fi
done
echo "${CDONE}DONE${CNORMAL}";
fi
}
-
+getaptconfig() {
+ if [ -f ./aptconfig.conf ]; then
+ echo "./aptconfig.conf"
+ elif [ -f ../aptconfig.conf ]; then
+ echo "../aptconfig.conf"
+ fi
+}
runapt() {
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
local CMD="$1"
shift
case $CMD in
- sh|aptitude|*/*) ;;
+ sh|aptitude|*/*|command) ;;
*) CMD="${BUILDDIRECTORY}/$CMD";;
esac
- if [ -f ./aptconfig.conf ]; then
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${LIBRARYPATH} $CMD "$@"
- elif [ -f ../aptconfig.conf ]; then
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${LIBRARYPATH} $CMD "$@"
- else
- MALLOC_PERTURB_=21 MALLOC_CHECK_=2 LD_LIBRARY_PATH=${LIBRARYPATH} $CMD "$@"
- fi
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG="$(getaptconfig)" LD_LIBRARY_PATH=${LIBRARYPATH} $CMD "$@"
}
aptconfig() { runapt apt-config "$@"; }
aptcache() { runapt apt-cache "$@"; }
aptftparchive() { runapt apt-ftparchive "$@"; }
aptkey() { runapt apt-key "$@"; }
aptmark() { runapt apt-mark "$@"; }
+aptsortpkgs() { runapt apt-sortpkgs "$@"; }
apt() { runapt apt "$@"; }
apthelper() { runapt "${APTHELPERBINDIR}/apt-helper" "$@"; }
aptwebserver() { runapt "${APTWEBSERVERBINDIR}/aptwebserver" "$@"; }
aptitude() { runapt aptitude "$@"; }
+aptextracttemplates() { runapt apt-extracttemplates "$@"; }
dpkg() {
command dpkg --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log "$@"
command dpkg-checkbuilddeps --admindir=${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg "$@"
}
gdb() {
- echo "gdb: run »$*«"
- APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${LIBRARYPATH} command gdb ${BUILDDIRECTORY}/$1 --args "$@"
+ local CMD="$1"
+ shift
+ runapt command gdb --quiet -ex run "${BUILDDIRECTORY}/$CMD" --args "${BUILDDIRECTORY}/$CMD" "$@"
}
gpg() {
# see apt-key for the whole trickery. Setup is done in setupenvironment
touch var/lib/dpkg/available
mkdir -p usr/lib/apt
ln -s ${METHODSDIR} usr/lib/apt/methods
- ln -s ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove etc/apt/apt.conf.d/01autoremove
+ # use the autoremove from the BUILDDIRECTORY if its there, otherwise
+ # system
+ if [ -e ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove ]; then
+ ln -s ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove etc/apt/apt.conf.d/01autoremove
+ else
+ ln -s /etc/apt/apt.conf.d/01autoremove etc/apt/apt.conf.d/01autoremove
+ fi
cd ..
local PACKAGESFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Packages-/' -e 's/^skip-/Packages-/')
if [ -f "${TESTDIRECTORY}/${PACKAGESFILE}" ]; then
fi
echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
echo 'quiet::NoUpdate "true";' >> aptconfig.conf
+ echo 'quiet::NoStatistic "true";' >> aptconfig.conf
echo "Acquire::https::CaInfo \"${TESTDIR}/apt.pem\";" > rootdir/etc/apt/apt.conf.d/99https
echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
gpg --quiet --check-trustdb --secret-keyring $SECRETKEYRING --keyring $SECRETKEYRING >/dev/null 2>&1
# cleanup the environment a bit
- export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
+ # prefer our apt binaries over the system apt binaries
+ export PATH="${BUILDDIRECTORY}:${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
export LC_ALL=C.UTF-8
unset LANGUAGE APT_CONFIG
unset GREP_OPTIONS DEB_BUILD_PROFILES
echo "$(aptconfig dump | grep APT::Architecture | cut -d'"' -f 2 | sed '/^$/ d' | sort | uniq | tr '\n' ' ')"
}
+getarchitecturesfromcommalist() {
+ echo "$1" | sed -e 's#,#\n#g' | sed -e "s/^native\$/$(getarchitecture 'native')/"
+}
+
configarchitecture() {
{
echo "APT::Architecture \"$(getarchitecture $1)\";"
# fi
done
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
rm -rf ${BUILDDIR}/debian/tmp
mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
something went horribly wrong! They are autogenerated
und used only by testcases and surf no other propose…"}"
local ARCHS=""
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
if [ "$arch" = 'all' -o "$arch" = 'none' ]; then
ARCHS="$(getarchitectures)"
else
local FILE='rootdir/var/lib/dpkg/status'
local INFO='rootdir/var/lib/dpkg/info'
- for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
+ for arch in $(getarchitecturesfromcommalist "$ARCH"); do
echo "Package: $NAME
Status: $STATUS
Priority: $PRIORITY
done
}
+# wait for up to 10s for a pid file to appear to avoid possible race
+# when a helper is started and dosn't write the PID quick enough
+waitforpidfile() {
+ local PIDFILE="$1"
+ for i in $(seq 10); do
+ if test -s "$PIDFILE"; then
+ return 0
+ fi
+ sleep 1
+ done
+ msgdie "waiting for $PIDFILE failed"
+ return 1
+}
+
changetowebserver() {
if [ "$1" != '--no-rewrite' ]; then
rewritesourceslist 'http://localhost:8080/'
cat $LOG
false
fi
+ waitforpidfile aptwebserver.pid
local PID="$(cat aptwebserver.pid)"
if [ -z "$PID" ]; then
msgdie 'Could not fork aptwebserver successfully'
connect = 8080
" > ${TMPWORKINGDIRECTORY}/stunnel.conf
stunnel4 "${TMPWORKINGDIRECTORY}/stunnel.conf"
+ waitforpidfile "${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid"
local PID="$(cat ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid)"
+ if [ -z "$PID" ]; then
+ msgdie 'Could not fork stunnel4 successfully'
+ fi
addtrap 'prefix' "kill ${PID};"
rewritesourceslist 'https://localhost:4433/'
}
downloadfile() {
local PROTO="$(echo "$1" | cut -d':' -f 1 )"
- apthelper -o Acquire::https::CaInfo=${TESTDIR}/apt.pem \
- -o Debug::Acquire::${PROTO}=1 \
+ apthelper -o Debug::Acquire::${PROTO}=1 \
download-file "$1" "$2" 2>&1 || true
# only if the file exists the download was successful
if [ -e "$2" ]; then
projects / apt.git / blobdiff