+"For example, the line \"Codename: &debian-testing-codename;\" specifies that "
+"all of the packages in the directory tree below the parent of the "
+"<filename>Release</filename> file belong to a version named <literal>&debian-"
+"testing-codename;</literal>. Specifying this value in the APT preferences "
+"file would require the line:"
+msgstr ""
+"nomeia o nome de código a qual todos os pacotes na árvore de directórios "
+"pertencem. Por exemplo, a linha \"Codename: &debian-testing-codename;\" "
+"especifica que todos os pacotes na árvore de directórios abaixo do pai do "
+"ficheiro <filename>Release</filename> pertencem a uma versão chamada "
+"<literal>&debian-testing-codename;</literal>. Especificar este valor no "
+"ficheiro de preferências do APT requer a linha:"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "Pin: release n=&debian-testing-codename;\n"
+msgstr "Pin: release n=&debian-testing-codename;\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
+#: apt_preferences.5.xml
+msgid ""
+"names the release version. For example, the packages in the tree might "
+"belong to Debian release version &debian-stable-version;. Note that there "
+"is normally no version number for the <literal>testing</literal> and "
+"<literal>unstable</literal> distributions because they have not been "
+"released yet. Specifying this in the APT preferences file would require one "
+"of the following lines."
+msgstr ""
+"nomeia a versão de lançamento. Por exemplo, os pacotes na árvore podem "
+"pertencer ao lançamento de Debian versão &debian-stable-version;. Note que "
+"não há normalmente um número de versão para as distribuições "
+"<literal>testing</literal> e <literal>unstable</literal>. porque ainda não "
+"foram lançadas. Especificar isto no ficheiro de preferências do APT irá "
+"requerer uma das seguintes linhas:"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid ""
+"Pin: release v=&debian-stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
+"Pin: release &debian-stable-version;\n"
+msgstr ""
+"Pin: release v=&debian-stable-version;\n"
+"Pin: release a=stable, v=&debian-stable-version;\n"
+"Pin: release &debian-stable-version;\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
+#: apt_preferences.5.xml
+msgid "the <literal>Component:</literal> line"
+msgstr "a linha <literal>Component:</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
+#: apt_preferences.5.xml
+msgid ""
+"names the licensing component associated with the packages in the directory "
+"tree of the <filename>Release</filename> file. For example, the line "
+"\"Component: main\" specifies that all the packages in the directory tree "
+"are from the <literal>main</literal> component, which entails that they are "
+"licensed under terms listed in the Debian Free Software Guidelines. "
+"Specifying this component in the APT preferences file would require the line:"
+msgstr ""
+"nomeia o componente de licenciamento associado com os pacotes na árvore de "
+"directórios do ficheiro <filename>Release</filename>. Por exemplo, a linha "
+"\"Component: main\" especifica que todos os pacotes na árvore de directórios "
+"são do componente <literal>main</literal>, o que implica que estão "
+"licenciados sob os termos listados em Debian Free Software Guidelines. "
+"Especificar este componente no ficheiro de preferências do APT irá requerer "
+"a linha:"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "Pin: release c=main\n"
+msgstr "Pin: release c=main\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
+#: apt_preferences.5.xml
+msgid "the <literal>Origin:</literal> line"
+msgstr "a linha <literal>Origin:</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
+#: apt_preferences.5.xml
+msgid ""
+"names the originator of the packages in the directory tree of the "
+"<filename>Release</filename> file. Most commonly, this is <literal>Debian</"
+"literal>. Specifying this origin in the APT preferences file would require "
+"the line:"
+msgstr ""
+"nomeia a originador dos pacotes na árvore de directórios do ficheiro "
+"<filename>Release</filename>. Geralmente, isto é <literal>Debian</literal>. "
+"Especificar esta etiqueta no ficheiro de preferências do APT irá requerer a "
+"linha:"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "Pin: release o=Debian\n"
+msgstr "Pin: release o=Debian\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
+#: apt_preferences.5.xml
+msgid "the <literal>Label:</literal> line"
+msgstr "a linha <literal>Label:</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
+#: apt_preferences.5.xml
+msgid ""
+"names the label of the packages in the directory tree of the "
+"<filename>Release</filename> file. Most commonly, this is <literal>Debian</"
+"literal>. Specifying this label in the APT preferences file would require "
+"the line:"
+msgstr ""
+"nomeia a etiqueta dos pacotes na árvore de directórios do ficheiro "
+"<filename>Release</filename>. Geralmente, isto é <literal>Debian</literal>. "
+"Especificar esta etiqueta no ficheiro de preferências do APT irá requerer a "
+"linha:"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "Pin: release l=Debian\n"
+msgstr "Pin: release l=Debian\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"All of the <filename>Packages</filename> and <filename>Release</filename> "
+"files retrieved from locations listed in the &sources-list; file are stored "
+"in the directory <filename>/var/lib/apt/lists</filename>, or in the file "
+"named by the variable <literal>Dir::State::Lists</literal> in the "
+"<filename>apt.conf</filename> file. For example, the file <filename>debian."
+"lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release</filename> "
+"contains the <filename>Release</filename> file retrieved from the site "
+"<literal>debian.lcs.mit.edu</literal> for <literal>binary-i386</literal> "
+"architecture files from the <literal>contrib</literal> component of the "
+"<literal>unstable</literal> distribution."
+msgstr ""
+"Todos os ficheiros <filename>Packages</filename> e <filename>Release</"
+"filename> obtidos das localizações listadas no ficheiro &sources-list; são "
+"armazenados no directório <filename>/var/lib/apt/lists</filename>, ou no "
+"ficheiro nomeado pela variável <literal>Dir::State::Lists</literal> no "
+"ficheiro <filename>apt.conf</filename>. Por exemplo, o ficheiro "
+"<filename>debian.lcs.mit.edu_debian_dists_unstable_contrib_binary-"
+"i386_Release</filename> contém o ficheiro <filename>Release</filename> "
+"obtido do site <literal>debian.lcs.mit.edu</literal> para ficheiros da "
+"arquitectura <literal>binary-i386</literal> do componente <literal>contrib</"
+"literal> da distribuição <literal>unstable</literal>."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt_preferences.5.xml
+msgid "Optional Lines in an APT Preferences Record"
+msgstr "Linhas Opcionais num Registo de Preferências do APT"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"Each record in the APT preferences file can optionally begin with one or "
+"more lines beginning with the word <literal>Explanation:</literal>. This "
+"provides a place for comments."
+msgstr ""
+"Cada registo no ficheiro de preferências do APT por começar opcionalmente "
+"com uma ou mais linhas começadas com a palavra <literal>Explanation:</"
+"literal>. Isto disponibiliza um espaço para comentários."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt_preferences.5.xml
+msgid "Tracking Stable"
+msgstr "Acompanhando Stable"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid ""
+"Explanation: Uninstall or do not install any Debian-originated\n"
+"Explanation: package versions other than those in the stable distro\n"
+"Package: *\n"
+"Pin: release a=stable\n"
+"Pin-Priority: 900\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+msgstr ""
+"Explicação: Desinstala ou não instala quaisquer versões de pacotes originais\n"
+"Explicação: Debian para além daquelas da distribuição stable\n"
+"Package: *\n"
+"Pin: release a=stable\n"
+"Pin-Priority: 900\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following APT preferences file will cause APT to assign a priority "
+"higher than the default (500) to all package versions belonging to a "
+"<literal>stable</literal> distribution and a prohibitively low priority to "
+"package versions belonging to other <literal>Debian</literal> "
+"distributions. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte ficheiro de preferências do APT irá fazer com que o APT atribua "
+"uma prioridade mais alta que o predefinido (500) a todos as versões de "
+"pacotes que pertencem a uma distribuição <literal>stable</literal> e uma "
+"prioridade proibitivamente baixa a versões de pacotes pertencentes a outras "
+"distribuições <literal>Debian</literal>. <placeholder type=\"programlisting"
+"\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid ""
+"apt-get install <replaceable>package-name</replaceable>\n"
+"apt-get upgrade\n"
+"apt-get dist-upgrade\n"
+msgstr ""
+"apt-get install <replaceable>nome-do-pacote</replaceable>\n"
+"apt-get upgrade\n"
+"apt-get dist-upgrade\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest "
+"<literal>stable</literal> version(s). <placeholder type=\"programlisting\" "
+"id=\"0\"/>"
+msgstr ""
+"Com um ficheiro &sources-list; apropriado e o ficheiro de preferências "
+"acima, qualquer dos seguintes comandos irá fazer com que o APT actualize "
+"para as versões <literal>stable</literal> mais recentes. <placeholder type="
+"\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/testing\n"
+msgstr "apt-get install <replaceable>pacote</replaceable>/testing\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>testing</literal> distribution; the package "
+"will not be upgraded again unless this command is given again. <placeholder "
+"type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte comandos irá fazer com que o APT actualize o pacote especificado "
+"para a versão mais recente da distribuição <literal>testing</literal>; o "
+"pacote não será actualizado de novo a menos que seja executado este comando "
+"outra vez. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt_preferences.5.xml
+msgid "Tracking Testing or Unstable"
+msgstr "Acompanhando Testing ou Unstable"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid ""
+"Package: *\n"
+"Pin: release a=testing\n"
+"Pin-Priority: 900\n"
+"\n"
+"Package: *\n"
+"Pin: release a=unstable\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+msgstr ""
+"Package: *\n"
+"Pin: release a=testing\n"
+"Pin-Priority: 900\n"
+"\n"
+"Package: *\n"
+"Pin: release a=unstable\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following APT preferences file will cause APT to assign a high priority "
+"to package versions from the <literal>testing</literal> distribution, a "
+"lower priority to package versions from the <literal>unstable</literal> "
+"distribution, and a prohibitively low priority to package versions from "
+"other <literal>Debian</literal> distributions. <placeholder type="
+"\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte ficheiro de preferências do APT irá fazer com que o APT atribua "
+"uma prioridade alta a versões de pacotes da distribuição <literal>testing</"
+"literal>, uma prioridade mais baixa a versões de pacotes da distribuição "
+"<literal>unstable</literal>, e uma prioridade proibitivamente baixa a "
+"versões de pacotes de outras distribuições <literal>Debian</literal>. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest "
+"<literal>testing</literal> version(s). <placeholder type=\"programlisting\" "
+"id=\"0\"/>"
+msgstr ""
+"Com um ficheiro &sources-list; apropriado e o ficheiro de preferências "
+"acima, qualquer dos seguintes comandos irá fazer com que o APT actualize "
+"para as versões <literal>testing</literal> mais recentes. <placeholder type="
+"\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/unstable\n"
+msgstr "apt-get install <replaceable>pacote</replaceable>/unstable\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>unstable</literal> distribution. "
+"Thereafter, <command>apt-get upgrade</command> will upgrade the package to "
+"the most recent <literal>testing</literal> version if that is more recent "
+"than the installed version, otherwise, to the most recent <literal>unstable</"
+"literal> version if that is more recent than the installed version. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O comando seguinte irá fazer com que o APT actualize o pacote especificado "
+"para a versão mais recente da distribuição <literal>unstable</literal>. "
+"Posteriormente, o <command>apt-get upgrade</command> irá actualizar o pacote "
+"para a versão <literal>testing</literal> mais recente se essa for mais "
+"recente que a versão instalada, caso contrário, para a versão "
+"<literal>unstable</literal> mais recente se essa for mais recente que a "
+"versão instalada. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt_preferences.5.xml
+msgid "Tracking the evolution of a codename release"
+msgstr "Acompanhando a evolução de um nome de código de lançamento"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid ""
+"Explanation: Uninstall or do not install any Debian-originated package versions\n"
+"Explanation: other than those in the distribution codenamed with &debian-testing-codename; or sid\n"
+"Package: *\n"
+"Pin: release n=&debian-testing-codename;\n"
+"Pin-Priority: 900\n"
+"\n"
+"Explanation: Debian unstable is always codenamed with sid\n"
+"Package: *\n"
+"Pin: release n=sid\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+msgstr ""
+"Explicação: Desinstala ou não instala nenhumas versões de pacotes originais Debian\n"
+"Explicação: para além daquelas da distribuição com nome de código &debian-testing-codename; ou sid\n"
+"Package: *\n"
+"Pin: release n=&debian-testing-codename;\n"
+"Pin-Priority: 900\n"
+"\n"
+"Explicação: Debian unstable tem sempre o nome de código sid\n"
+"Package: *\n"
+"Pin: release a=sid\n"
+"Pin-Priority: 800\n"
+"\n"
+"Package: *\n"
+"Pin: release o=Debian\n"
+"Pin-Priority: -10\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following APT preferences file will cause APT to assign a priority "
+"higher than the default (500) to all package versions belonging to a "
+"specified codename of a distribution and a prohibitively low priority to "
+"package versions belonging to other <literal>Debian</literal> distributions, "
+"codenames and archives. Note that with this APT preference APT will follow "
+"the migration of a release from the archive <literal>testing</literal> to "
+"<literal>stable</literal> and later <literal>oldstable</literal>. If you "
+"want to follow for example the progress in <literal>testing</literal> "
+"notwithstanding the codename changes you should use the example "
+"configurations above. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte ficheiro de preferências do APT irá fazer com que o APT atribua "
+"uma prioridade mais alta que a predefinida (500) a todas as versões de "
+"pacotes pertencentes a um nome de código especificado de uma distribuição "
+"com uma prioridade proibitivamente baixa a versões de pacotes pertencentes a "
+"outras distribuições, nomes de código ou arquivos <literal>Debian</literal>. "
+"Note que com estas preferências o APT irá seguir a migração de um lançamento "
+"a partir do arquivo <literal>testing</literal> para <literal>stable</"
+"literal> e mais tarde <literal>oldstable</literal>. Se você que seguir por "
+"exemplo o progresso em <literal>testing</literal> não obstante as alterações "
+"do nome de código, você deve usar as configurações exemplo acima. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest version(s) in "
+"the release codenamed with <literal>&debian-testing-codename;</literal>. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"Com um ficheiro &sources-list; apropriado e o ficheiro de preferências "
+"acima, qualquer dos seguintes comandos fará com que o APT actualize para a "
+"versão mais recente no lançamento com nome de código <literal>&debian-"
+"testing-codename;</literal>. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/sid\n"
+msgstr "apt-get install <replaceable>pacote</replaceable>/sid\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>sid</literal> distribution. Thereafter, "
+"<command>apt-get upgrade</command> will upgrade the package to the most "
+"recent <literal>&debian-testing-codename;</literal> version if that is more "
+"recent than the installed version, otherwise, to the most recent "
+"<literal>sid</literal> version if that is more recent than the installed "
+"version. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"O seguinte comando irá fazer com que o APT actualize o pacote especificado "
+"para a versão mais recente da distribuição <literal>sid</literal>. "
+"Posteriormente, <command>apt-get upgrade</command> irá actualizar o pacote "
+"para a versão <literal>&debian-testing-codename;</literal> mais recente se "
+"essa for mais recente que a versão instalada, caso contrário, para a versão "
+"<literal>sid</literal> mais recente se essa for mais recente que a versão "
+"instalada. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt_preferences.5.xml
+msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: sources.list.5.xml
+msgid "List of configured APT data sources"
+msgstr "Lista das fontes de dados APT configuradas"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The source list <filename>/etc/apt/sources.list</filename> is designed to "
+#| "support any number of active sources and a variety of source media. The "
+#| "file lists one source per line, with the most preferred source listed "
+#| "first. The information available from the configured sources is acquired "
+#| "by <command>apt-get update</command> (or by an equivalent command from "
+#| "another APT front-end)."
+msgid ""
+"The source list <filename>/etc/apt/sources.list</filename> and the files "
+"contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
+"support any number of active sources and a variety of source media. The "
+"files list one source per line (one-line style) or contain multiline stanzas "
+"defining one or more sources per stanza (deb822 style), with the most "
+"preferred source listed first (in case a single version is available from "
+"more than one source). The information available from the configured sources "
+"is acquired by <command>apt-get update</command> (or by an equivalent "
+"command from another APT front-end)."
+msgstr ""
+"A lista de fontes <filename>/etc/apt/sources.list</filename> está desenhada "
+"a suportar qualquer número de fontes activas e uma variedade de meios de "
+"fontes. O ficheiro lista uma fonte por cada linha, com as fontes mais "
+"preferidas listadas primeiro. A informação disponível a partir das fontes "
+"configuradas é obtida pelo <command>apt-get update</command> (ou por um "
+"comando equivalente de outra interface \"front-end\" do APT)."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "sources.list.d"
+msgstr "sources.list.d"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <filename>/etc/apt/sources.list.d</filename> directory provides a way "
+#| "to add sources.list entries in separate files. The format is the same as "
+#| "for the regular <filename>sources.list</filename> file. File names need "
+#| "to end with <filename>.list</filename> and may only contain letters (a-z "
+#| "and A-Z), digits (0-9), underscore (_), hyphen (-) and period (.) "
+#| "characters. Otherwise APT will print a notice that it has ignored a "
+#| "file, unless that file matches a pattern in the <literal>Dir::Ignore-"
+#| "Files-Silently</literal> configuration list - in which case it will be "
+#| "silently ignored."
+msgid ""
+"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
+"add sources.list entries in separate files. Two different file formats are "
+"allowed as described in the next two sections. Filenames need to have "
+"either the extension <filename>.list</filename> or <filename>.sources</"
+"filename> depending on the contained format. The filenames may only contain "
+"letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and period "
+"(.) characters. Otherwise APT will print a notice that it has ignored a "
+"file, unless that file matches a pattern in the <literal>Dir::Ignore-Files-"
+"Silently</literal> configuration list - in which case it will be silently "
+"ignored."
+msgstr ""
+"O directório <filename>/etc/apt/sources.list.d</filename> disponibiliza um "
+"modo de adicionar entradas na sources.list em ficheiros separados. O formato "
+"é o mesmo que para o ficheiro <filename>sources.list</filename> regular. Os "
+"nomes de ficheiros precisam acabar com <filename>.list</filename> e apenas "
+"podem conter letras (a-z e A-Z), dígitos (0-9), e os caracteres underscore "
+"(_), menos (-) e ponto (.). De outro modo o APT irá escrever um aviso de que "
+"ignorou um ficheiro, a menos que esse ficheiro coincida com um padrão na "
+"lista de configuração <literal>Dir::Ignore-Files-Silently</literal> - que "
+"neste caso serão ignorados em silêncio."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "One-Line-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.list</filename>. Each "
+"line specifying a source starts with a type (e.g. <literal>deb-src</"
+"literal>) followed by options and arguments for this type. Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment. Consequently an entry can be disabled by "
+"commenting out the entire line. If options should be provided they are "
+"separated by spaces and all of them together are enclosed by square brackets "
+"(<literal>[]</literal>) included in the line after the type separated from "
+"it with a space. If an option allows multiple values these are separated "
+"from each other with a comma (<literal>,</literal>). An option name is "
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is the traditional format and supported by all apt versions. Note that "
+"not all options as described below are supported by all apt versions. Note "
+"also that some older applications parsing this format on their own might not "
+"expect to encounter options as they were uncommon before the introduction of "
+"multi-architecture support."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "deb822-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.sources</filename>. The "
+"format is similar in syntax to other files used by Debian and its "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package. Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "
+"usually easier to add the field \"Enabled: no\" to the stanza to disable the "
+"entry. Removing the field or setting it to yes reenables it. Options have "
+"the same syntax as every other field: A fieldname separated by a colon "
+"(<literal>:</literal>) and optionally spaces from its value(s). Note "
+"especially that multiple values are separated by spaces, not by commas as in "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "
+"also have <literal>Architectures-Add</literal> and <literal>Architectures-"
+"Remove</literal> to modify the default value rather than replacing it."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is a new format supported by apt itself since version 1.1. Previous "
+"versions ignore such files with a notice message as described earlier. It "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "
+"sources and/or options are involved. Developers who are working with and/or "
+"parsing apt sources are highly encouraged to add support for this format and "
+"to contact the APT team to coordinate and share this work. Users can freely "
+"adopt this format already, but may encounter problems with software not "
+"supporting the format yet."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src Types: General Format"
+msgstr "Os tipos deb e deb-src"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>deb</literal> type references a typical two-level Debian "
+#| "archive, <filename>distribution/component</filename>. The "
+#| "<literal>distribution</literal> is generally an archive name like "
+#| "<literal>stable</literal> or <literal>testing</literal> or a codename "
+#| "like <literal>&debian-stable-codename;</literal> or <literal>&debian-"
+#| "testing-codename;</literal> while component is one of <literal>main</"
+#| "literal>, <literal>contrib</literal> or <literal>non-free</literal>. The "
+#| "<literal>deb-src</literal> type references a Debian distribution's source "
+#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
+#| "src</literal> line is required to fetch source indexes."
+msgid ""
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally a suite name like "
+"<literal>stable</literal> or <literal>testing</literal> or a codename like "
+"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-"
+"codename;</literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
+msgstr ""
+"O tipo <literal>deb</literal> descreve um arquivo Debian típico de dois "
+"níveis, <filename>distribution/component</filename>. A "
+"<literal>distribution</literal> é geralmente um nome de arquivo como "
+"<literal>stable</literal> ou <literal>testing</literal> ou um nome de código "
+"como <literal>&debian-stable-codename;</literal> ou <literal>&debian-testing-"
+"codename;</literal> enquanto que componente é um de <literal>main</literal>, "
+"<literal>contrib</literal> ou <literal>non-free</literal>. O tipo "
+"<literal>deb-src</literal> faz referência a um código fonte de distribuição "
+"Debian no mesmo formato que o tipo <literal>deb</literal>. É necessária uma "
+"linha <literal>deb-src</literal> para obter índices das fontes."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The format for a <filename>sources.list</filename> entry using the "
+#| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
+msgid ""
+"The format for two one-line-style entries using the <literal>deb</literal> "
+"and <literal>deb-src</literal> types is:"
+msgstr ""
+"O formato para uma entrada na <filename>sources.list</filename> usando os "
+"tipos <literal>deb</literal> e <literal>deb-src</literal> é:"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]\n"
+"deb-src [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+" Types: deb deb-src\n"
+" URIs: uri\n"
+" Suites: suite\n"
+" Components: [component1] [component2] [...]\n"
+" option1: value1\n"
+" option2: value2\n"
+" "
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Alternatively a rfc822 style format is also supported: <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Alternatively the equivalent entry in deb822 style looks like this: "
+"<placeholder type=\"literallayout\" id=\"0\"/>"
+msgstr ""
+"Em alternativa, é também suportado um formato estilo rfc822: <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>suite</literal> can specify an exact path, in which case the "
+#| "components must be omitted and <literal>suite</literal> must end with a "
+#| "slash (<literal>/</literal>). This is useful for the case when only a "
+#| "particular sub-section of the archive denoted by the URI is of interest. "
+#| "If <literal>suite</literal> does not specify an exact path, at least one "
+#| "<literal>component</literal> must be present."
+msgid ""
+"The URI for the <literal>deb</literal> type must specify the base of the "
+"Debian distribution, from which APT will find the information it needs. "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-directory of the archive denoted by the URI is of interest. "
+"If <literal>suite</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
+msgstr ""
+"O URI para o tipo <literal>deb</literal> tem de especificar a base da "
+"distribuição Debian, a partir do qual o APT irá encontrar a informação que "
+"precisa. <literal>suite</literal> pode especificar um caminho exacto, que no "
+"caso os componente têm de ser omitidos e <literal>suite</literal> deve "
+"terminar com uma barra (<literal>/</literal>). Isto é útil para o caso de "
+"apenas ser de interesse uma sub-secção particular do arquivo denotado pelo "
+"URI. Se <literal>suite</literal> não especificar um caminho exacto, pelo "
+"menos um <literal>component</literal> tem de estar presente."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+#| "literal> which expands to the Debian architecture (such as "
+#| "<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
+#| "This permits architecture-independent <filename>sources.list</filename> "
+#| "files to be used. In general this is only of interest when specifying an "
+#| "exact path, <literal>APT</literal> will automatically generate a URI with "
+#| "the current architecture otherwise."
+msgid ""
+"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+"literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path; "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>suite</literal> também pode conter uma variável. <literal>$(ARCH)</"
+"literal> a qual se expande à arquitectura Debian (tal como <literal>amd64</"
+"literal> ou <literal>armel</literal>) usada no sistema. Isto permite que "
+"seja usados ficheiros <filename>sources.list</filename> independentes da "
+"arquitectura. Em geral, isto é apenas de interesse quando se especifica um "
+"caminho exacto. De outro modo o <literal>APT</literal> irá gerar "
+"automaticamente um URI com a arquitectura actual."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "In the traditional style sources.list format since only one distribution "
+#| "can be specified per line it may be necessary to have multiple lines for "
+#| "the same URI, if a subset of all available distributions or components at "
+#| "that location is desired. APT will sort the URI list after it has "
+#| "generated a complete set internally, and will collapse multiple "
+#| "references to the same Internet host, for instance, into a single "
+#| "connection, so that it does not inefficiently establish an FTP "
+#| "connection, close it, do something else, and then re-establish a "
+#| "connection to that same host. This feature is useful for accessing busy "
+#| "FTP sites with limits on the number of simultaneous anonymous users. APT "
+#| "also parallelizes connections to different hosts to more effectively deal "
+#| "with sites with low bandwidth."
+msgid ""
+"Especially in the one-line-style format since only one distribution can be "
+"specified per line it may be necessary to have multiple lines for the same "
+"URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish a connection, close it, do something else, and then "
+"re-establish a connection to that same host. APT also parallelizes "
+"connections to different hosts to more effectively deal with sites with low "
+"bandwidth."
+msgstr ""
+"No estilo tradicional, o formato do sources.list, como apenas pode ser "
+"especificada por linha uma distribuição, pode ser necessário ter várias "
+"linhas para o mesmo URI, se só for desejado um sub-conjunto de todas as "
+"distribuições e componentes dessa localização. O APT irá ordenar a lista de "
+"URI após ter gerado internamente um conjunto completo, e irá desabar as "
+"várias referências à mesma máquina na Internet, por exemplo, numa única "
+"ligação, para que não estabeleça uma ligação FTP ineficiente, a feche, faça "
+"outra coisa, e depois volte a estabelecer ligação à mesma máquina. Esta "
+"funcionalidade é útil para aceder a sites FTP ocupados que limitam o número "
+"de utilizadores anónimos em simultâneo. O APT também paraleliza ligações a "
+"máquinas diferentes para lidar mais eficientemente com sites com largura de "
+"banda baixa."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+"É importante listar as fontes por ordem de preferência, com a fonte mais "
+"preferida listada em primeiro lugar. Tipicamente isto irá resultar numa "
+"ordenação por velocidades desde o mais rápido até ao mais lento (CD-ROM "
+"seguido por máquinas numa rede local, seguido por máquinas distantes na "
+"Internet, por exemplo)."
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-list-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-sources-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src types: Options"
+msgstr "Os tipos deb e deb-src"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
+"the option to modify them based on the default, but we aren't listing those "
+"names explicitly here. Unsupported options are silently ignored by all APT "
+"versions."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Architectures</option> (<option>arch</option>) is a multivalue "
+"option defining for which architectures information should be downloaded. If "
+"this option isn't set the default is all architectures as defined by the "
+"<option>APT::Architectures</option> config option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> pode ser usado para especificar para quais "
+"arquitecturas deve ser descarregada a informação. Se esta opção não estiver "
+"definida, serão descarregadas todas as arquitecturas definidas pela opção "
+"<literal>APT::Architectures</literal>."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Languages</option> (<option>lang</option>) is a multivalue option "
+"defining for which languages information such as translated package "
+"descriptions should be downloaded. If this option isn't set the default is "
+"all languages as defined by the <option>Acquire::Languages</option> config "
+"option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> pode ser usado para especificar para quais "
+"arquitecturas deve ser descarregada a informação. Se esta opção não estiver "
+"definida, serão descarregadas todas as arquitecturas definidas pela opção "
+"<literal>APT::Architectures</literal>."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Targets</option> (<option>target</option>) is a multivalue option "
+"defining which download targets apt will try to acquire from this source. If "
+"not specified, the default set is defined by the <option>Acquire::"
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>PDiffs</option> (<option>pdiffs</option>) is a yes/no value which "
+"controls if APT should try to use PDiffs to update old indexes instead of "
+"downloading the new indexes entirely. The value of this option is ignored if "
+"the repository doesn't announce the availability of PDiffs. Defaults to the "
+"value of the option with the same name for a specific index file defined in "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
+"the value of configuration option <option>Acquire::PDiffs</option> which "
+"defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
+"activates/disables the use of this feature if this source indicates support "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
+"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
+"sources with the same URI and Suite, so they have to be set on all such "
+"entries and can not be varied between different components. APT will try to "
+"detect and error out on such anomalies."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Signed-By</option> (<option>signed-by</option>) is either an "
+"absolute path to a keyring file (has to be accessible and readable for the "
+"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
+"filename> directory (see <command>apt-key fingerprint</command>). If the "
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
+"a yes/no value which controls if APT should try to detect replay attacks. A "
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Valid-Until-Min</option> (<option>valid-until-min</option>) and "
+"<option>Valid-Until-Max</option> (<option>valid-until-max</option>) can be "
+"used to raise or lower the time period in seconds in which the data from "
+"this repository is considered valid. -Max can be especially useful if the "
+"repository provides no Valid-Until field on its Release file to set your own "
+"value, while -Min can be used to increase the valid time on seldom updated "
+"(local) mirrors of a more frequently updated but less accessible archive "
+"(which is in the sources.list as well) instead of disabling the check "
+"entirely. Default to the value of the configuration options "
+"<option>Acquire::Min-ValidTime</option> and <option>Acquire::Max-ValidTime</"
+"option> which are both unset by default."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "URI Specification"
+msgstr "Especificação da URI"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "The currently recognized URI types are:"
+msgstr "Os tipos de URI actualmente reconhecidos são:"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The file scheme allows an arbitrary directory in the file system to be "
+"considered an archive. This is useful for NFS mounts and local mirrors or "
+"archives."
+msgstr ""
+"O esquema file permite que um directório arbitrário do sistema de ficheiros "
+"seja considerado um arquivo. Isto é útil para montagens NFS e mirrors ou "
+"arquivos locais."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
+"Use the &apt-cdrom; program to create cdrom entries in the source list."
+msgstr ""
+"O esquema cdrom permite ao APT usar uma drive de CD-ROM local com mudança de "
+"media. Use o programa &apt-cdrom; para criar entradas cdrom na lista de "
+"fontes."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The http scheme specifies an HTTP server for the archive. If an environment "
+"variable <envar>http_proxy</envar> is set with the format http://server:"
+"port/, the proxy server specified in <envar>http_proxy</envar> will be used. "
+"Users of authenticated HTTP/1.1 proxies may use a string of the format "
+"http://user:pass@server:port/. Note that this is an insecure method of "
+"authentication."
+msgstr ""
+"O esquema http especifica um servidor HTTP para o arquivo. Se uma variável "
+"de ambiente <envar>http_proxy</envar> estiver definida com o formato http://"
+"server:port/, será usado o servidor proxy especificado em <envar>http_proxy</"
+"envar>. Os utilizadores de proxies HTTP/1.1 autenticados pode usar uma "
+"string do formato http://user:pass@server:port/. Note que este não é um "
+"método de autenticação seguro."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
+"is highly configurable; for more information see the &apt-conf; manual page. "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
+"ignored."
+msgstr ""
+"O esquema ftp especifica um servidor FTP para o arquivo. O comportamento FTP "
+"do APT é altamente configurável; para mais informação veja o manual do &apt-"
+"conf;. Por favor note que pode ser especificado um proxy FTP ao usar a "
+"variável de ambiente <envar>ftp_proxy</envar>. É possível especifica um "
+"proxy HTTP (os servidores proxy HTTP geralmente compreendem URLs de FTP) "
+"usando esta variável de ambiente e <emphasis>apenas</emphasis> esta variável "
+"de ambiente. Os proxies que usam HTTP especificados no ficheiro de "
+"configuração serão ignorados."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The copy scheme is identical to the file scheme except that packages are "
+"copied into the cache directory instead of used directly at their location. "
+"This is useful for people using removable media to copy files around with "
+"APT."
+msgstr ""
+"O esquema copy é idêntico ao esquema file com a excepção que os pacotes são "
+"copiados para o directório cache em vez serem usados directamente da sua "
+"localização. Isto é útil para quem use um meio amovível para copiar "
+"ficheiros com o APT."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
+msgstr ""
+"O método rsh/ssh invoca RSH/SSH a ligar a uma máquina remota e aceder a "
+"ficheiros como um dado utilizador. É recomendada a configuração prévia de "
+"rhosts ou chaves RSA. Os comandos standard <command>find</command> e "
+"<command>dd</command> são usados para executar as transferências de "
+"ficheiros a partir da máquina remota."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
+#: sources.list.5.xml
+msgid "adding more recognizable URI types"
+msgstr "adicionando mais tipos de URI reconhecíveis"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
+"transport-debtorrent;."
+msgstr ""
+"O APT pode ser estendido com mais métodos lançados em outros pacotes "
+"opcionais, que devem seguir o esquema de nomeação <literal>apt-transport-"
+"<replaceable>método</replaceable></literal>. Por exemplo, a equipa do APT "
+"também mantém o pacote <package>apt-transport-https</package>, o qual "
+"disponibiliza métodos de acesso para URIs HTTPS com funcionalidades "
+"semelhantes ao método http. Estão também disponíveis métodos para usar por "
+"exemplo o debtorrent - veja &apt-transport-debtorrent;."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses the archive stored locally (or NFS mounted) at /home/apt/debian for "
+"stable/main, stable/contrib, and stable/non-free."
+msgstr ""
+"Usa o arquivo armazenado localmente (ou montagem NFS) em /home/apt/debian "
+"para stable/main, stable/contrib, e stable/non-free."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian stable main contrib non-free"
+msgstr "deb file:/home/apt/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "As above, except this uses the unstable (development) distribution."
+msgstr ""
+"Como em cima, excepto que usa a distribuição unstable (de desenvolvimento)."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb file:/home/apt/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."
+msgstr "Linha de fonte para o referido acima"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb-src file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb-src file:/home/apt/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"The first line gets package information for the architectures in "
+"<literal>APT::Architectures</literal> while the second always retrieves "
+"<literal>amd64</literal> and <literal>armel</literal>."
+msgstr ""
+"A primeira linha obtém a informação do pacote para a arquitectura em "
+"<literal>APT::Architectures</literal> enquanto a segunda obtém sempre "
+"<literal>amd64</literal> e <literal>armel</literal>."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+msgstr ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+msgstr ""
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to access the archive at archive.debian.org, and uses only the "
+"hamm/main area."
+msgstr ""
+"Usa HTTP para aceder ao arquivo em archive.debian.org, e usa apenas a área "
+"hamm/main."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+msgstr ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the &debian-stable-codename;/contrib area."
+msgstr ""
+"Usa FTP para aceder ao arquivo em ftp.debian.org, sob o directório debian, e "
+"usa apenas a área &debian-stable-codename;/contrib."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: contrib"
+msgstr ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: contrib"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the unstable/contrib area. If this line appears as "
+"well as the one in the previous example in <filename>sources.list</filename> "
+"a single FTP session will be used for both resource lines."
+msgstr ""
+"Usa FTP para aceder ao arquivo em ftp.debian.org, sob o directório debian, e "
+"usa apenas a área unstable/contrib. Se esta linha aparecer também como "
+"aquela no exemplo anterior em <filename>sources.list</filename> será usada "
+"uma única sessão FTP para ambas linhas de recurso."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+msgstr ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+msgstr ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+#| "directory, and uses only files found under <filename>unstable/binary-"
+#| "i386</filename> on i386 machines, <filename>unstable/binary-amd64</"
+#| "filename> on amd64, and so forth for other supported architectures. [Note "
+#| "this example only illustrates how to use the substitution variable; "
+#| "official debian archives are not structured like this] <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+"directory, and uses only files found under <filename>unstable/binary-i386</"
+"filename> on i386 machines, <filename>unstable/binary-amd64</filename> on "
+"amd64, and so forth for other supported architectures. [Note this example "
+"only illustrates how to use the substitution variable; official debian "
+"archives are not structured like this] <placeholder type=\"literallayout\" "
+"id=\"0\"/> <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+"Usa HTTP para aceder ao arquivo em ftp.tlh.debian.org, sob o directório "
+"universe, e usa apenas os ficheiros encontrados sob <filename>unstable/"
+"binary-i386</filename> em máquinas i386, <filename>unstable/binary-amd64</"
+"filename> em amd64, e assim por diante para outras arquitecturas suportadas. "
+"[Note que este exemplo apenas mostra como usar a variável de substituição; "
+"os arquivos oficiais debian não estão estruturados assim] <placeholder type="
+"\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to get binary packages as well as sources from the stable, testing "
+"and unstable suites and the components main and contrib."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb deb-src\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: stable testing unstable\n"
+"Components: main contrib\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
+msgstr "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
+
+#. type: Content of: <refentry><refmeta><manvolnum>
+#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "1"
+msgstr "1"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
+msgstr ""
+"Utilitário para extrair configurações e modelos <command>debconf</command> a "
+"partir de pacotes Debian"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> will take one or more Debian package "
+"files as input and write out (to a temporary directory) all associated "
+"config scripts and template files. For each passed in package that contains "
+"config scripts and templates, one line of output will be generated in the "
+"format:"
+msgstr ""
+"<command>apt-extracttemplates</command> irá receber um ou mais ficheiros de "
+"pacotes Debian na sua entrada e escrever (para um directório temporário) "
+"todos os scripts de configuração associados e ficheiros de modelo. Por cada "
+"pacote passado por ele que contenha scripts de configuração e modelos, será "
+"gerada uma linha no formato:"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid "package version template-file config-script"
+msgstr "pacote versão ficheiro-modelo script-de-configuração"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"template-file and config-script are written to the temporary directory "
+"specified by the <option>-t</option> or <option>--tempdir</option> "
+"(<literal>APT::ExtractTemplates::TempDir</literal>) directory, with "
+"filenames of the form <filename>package.template.XXXXXX</filename> and "
+"<filename>package.config.XXXXXX</filename>"
+msgstr ""
+"ficheiro-modelo e script-de-configuração são escritos num directório "
+"temporário especificado por <option>-t</option> ou <option>--tempdir</"
+"option> (<literal>APT::ExtractTemplates::TempDir</literal>) directório, com "
+"nomes de ficheiros no formato <filename>pacote.modelo.XXXXXX</filename> e "
+"<filename>pacote.configuração.XXXXXX</filename>"
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Temporary directory in which to write extracted <command>debconf</command> "
+"template files and config scripts. Configuration Item: <literal>APT::"
+"ExtractTemplates::TempDir</literal>"
+msgstr ""
+"Directório temporário para onde escrever ficheiros <command>debconf</"
+"command> modelo extraídos e scripts de configuração. Item de Configuração: "
+"<literal>APT::ExtractTemplates::TempDir</literal>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> returns zero on normal operation, "
+"decimal 100 on error."
+msgstr ""
+"<command>apt-extracttemplates</command> devolve zero na operação normal, 100 "
+"decimal em erro."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-sortpkgs.1.xml
+msgid "Utility to sort package index files"
+msgstr "Utilitário para organizar ficheiros índice de pacotes"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> will take an index file (source index or "
+"package index) and sort the records so that they are ordered by the package "
+"name. It will also sort the internal fields of each record according to the "
+"internal sorting rules."
+msgstr ""
+"<command>apt-sortpkgs</command> irá pegar num ficheiro índice (índice de "
+"fontes ou índice de pacotes) e organizar os registos para que fiquem "
+"ordenados pelo nome do pacote. Também organiza os campos internos de cada "
+"registo de acordo com as regras de organização internas."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"All output is sent to standard output; the input must be a seekable file."
+msgstr ""
+"Todas as saídas são enviadas para a saída standard, a entrada tem de ser um "
+"ficheiro pesquisável."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"Use source index field ordering. Configuration Item: <literal>APT::"
+"SortPkgs::Source</literal>."
+msgstr ""
+"Usa ordenação de campo de índice Source. Item de Configuração: <literal>APT::"
+"SortPkgs::Source</literal>."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
+"100 on error."
+msgstr ""
+"<command>apt-sortpkgs</command> devolve zero na operação normal, 100 decimal "
+"em erro."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-ftparchive.1.xml
+msgid "Utility to generate index files"
+msgstr "Utilitário para gerar ficheiros de índice"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is the command line tool that generates "
+"the index files that APT uses to access a distribution source. The index "
+"files should be generated on the origin site based on the content of that "
+"site."
+msgstr ""
+"<command>apt-ftparchive</command> é a ferramenta de linha de comandos que "
+"cria os ficheiros índice que o APT usa para aceder a uma fonte de "
+"distribuição. Os ficheiros índice devem ser gerados no site de origem "
+"baseados no conteúdo desse site."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
+"program, incorporating its entire functionality via the <literal>packages</"
+"literal> command. It also contains a contents file generator, "
+"<literal>contents</literal>, and an elaborate means to 'script' the "
+"generation process for a complete archive."
+msgstr ""
+"<command>apt-ftparchive</command> é um super conjunto do programa &dpkg-"
+"scanpackages;, incorporando todas as suas funcionalidades através do comando "
+"<literal>packages</literal>. Também contém um gerador de ficheiro de "
+"conteúdos, <literal>contents</literal>, e um meio elaborado de colocar em "
+"script o processo de geração para um arquivo completo."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Internally <command>apt-ftparchive</command> can make use of binary "
+"databases to cache the contents of a .deb file and it does not rely on any "
+"external programs aside from &gzip;. When doing a full generate it "
+"automatically performs file-change checks and builds the desired compressed "
+"output files."
+msgstr ""
+"Internamente o <command>apt-ftparchive</command> pode fazer uso de bases de "
+"dados binárias para por em cache os conteúdos de um ficheiro .deb e não "
+"precisa de nenhum programa externo à excepção do &gzip;. Quando faz uma "
+"geração completa, executa automaticamente verificações de alterações de "
+"ficheiros e constrói os ficheiros comprimidos desejados."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The packages command generates a package file from a directory tree. It "
+"takes the given directory and recursively searches it for .deb files, "
+"emitting a package record to stdout for each. This command is approximately "
+"equivalent to &dpkg-scanpackages;."
+msgstr ""
+"O comando packages gera um ficheiro pacote a partir duma árvore de "
+"directórios. Recebe um dado directório e procura recursivamente por "
+"ficheiros .deb, emitindo um registo de pacote para o stdout por cada um. "
+"Este comando é aproximadamente equivalente ao &dpkg-scanpackages;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The option <option>--db</option> can be used to specify a binary caching DB."
+msgstr ""
+"A opção <option>--db</option> pode ser usada para especificar uma base de "
+"dados de cache binária."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>sources</literal> command generates a source index file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .dsc files, emitting a source record to stdout for each. This command is "
+"approximately equivalent to &dpkg-scansources;."
+msgstr ""
+"O comando <literal>sources</literal> gera um índice de fonte a partir duma "
+"árvore de directórios. Recebe um dado directório e procura recursivamente "
+"por ficheiros .dsc, emitindo um registo de fonte para o stdout por cada um. "
+"Este comando é aproximadamente equivalente ao &dpkg-scansources;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"If an override file is specified then a source override file will be looked "
+"for with an extension of .src. The --source-override option can be used to "
+"change the source override file that will be used."
+msgstr ""
+"Se for especificado um ficheiro de sobreposição então será procurado um "
+"ficheiro de sobreposição de fonte com uma extensão de .src. A opção --"
+"source-override pode ser usada para alterar o ficheiro de sobreposição de "
+"fonte que irá ser usado."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>contents</literal> command generates a contents file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .deb files, and reads the file list from each file. It then sorts and "
+"writes to stdout the list of files matched to packages. Directories are not "
+"written to the output. If multiple packages own the same file then each "
+"package is separated by a comma in the output."
+msgstr ""
+"O comando<literal>contents</literal> gera um ficheiro de conteúdos a partir "
+"duma árvore de directórios. Recebe um dado directório e procura "
+"recursivamente por ficheiros .deb, e lê a lista de ficheiros de cada "
+"ficheiro. Então organiza e escreve para o stdout a lista de ficheiros "
+"correspondente a pacotes. Os directórios não são escritos no saída. Se "
+"múltiplos pacotes possuírem o mesmo ficheiro então cada pacote é separado "
+"por uma vírgula na saída."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>release</literal> command generates a Release file from a "
+#| "directory tree. It recursively searches the given directory for "
+#| "uncompressed <filename>Packages</filename> and <filename>Sources</"
+#| "filename> files and ones compressed with <command>gzip</command>, "
+#| "<command>bzip2</command> or <command>lzma</command> as well as "
+#| "<filename>Release</filename> and <filename>md5sum.txt</filename> files by "
+#| "default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+#| "Additional filename patterns can be added by listing them in "
+#| "<literal>APT::FTPArchive::Release::Patterns</literal>. It then writes to "
+#| "stdout a <filename>Release</filename> file containing an MD5, SHA1 and "
+#| "SHA256 digest for each file."
+msgid ""
+"The <literal>release</literal> command generates a Release file from a "
+"directory tree. It recursively searches the given directory for uncompressed "
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
+msgstr ""
+"O comando <literal>release</literal> gera um ficheiro Release a partir de "
+"uma árvore de directórios. Por predefinição, procura recursivamente no "
+"directório fornecido por ficheiros <filename>Packages</filename> e "
+"<filename>Sources</filename> não comprimidos e outros comprimidos com "
+"<command>gzip</command>, <command>bzip2</command> ou <command>lzma</command> "
+"assim como ficheiros <filename>Release</filename> e <filename>md5sum.txt</"
+"filename> (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Depois escreve para o stdout um ficheiro <filename>Release</filename> que "
+"contém um resultado de MD5, SHA1 e SHA256 para cada ficheiro."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Values for the additional metadata fields in the Release file are taken from "
+"the corresponding variables under <literal>APT::FTPArchive::Release</"
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
+"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
+"literal>, <literal>Date</literal>, <literal>NotAutomatic</literal>, "
+"<literal>ButAutomaticUpgrades</literal>, <literal>Acquire-By-Hash</literal>, "
+"<literal>Valid-Until</literal>, <literal>Signed-By</literal>, "
+"<literal>Architectures</literal>, <literal>Components</literal> and "
+"<literal>Description</literal>."
+msgstr ""
+"Valores para os campos de metadados adicionais no ficheiro Release são "
+"tomados a partir das variáveis correspondentes sob <literal>APT::FTPArchive::"
+"Release</literal>, ex. <literal>APT::FTPArchive::Release::Origin</literal>. "
+"Os campos suportados são: <literal>Origin</literal>, <literal>Label</"
+"literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+"<literal>Codename</literal>, <literal>Date</literal>, <literal>NotAutomatic</"
+"literal>, <literal>ButAutomaticUpgrades</literal>, <literal>Acquire-By-Hash</"
+"literal>, <literal>Valid-Until</literal>, <literal>Signed-By</literal>, "
+"<literal>Architectures</literal>, <literal>Components</literal>, "
+"<literal>Description</literal>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command is designed to be runnable from a "
+"cron script and builds indexes according to the given config file. The "
+"config language provides a flexible means of specifying which index files "
+"are built from which directories, as well as providing a simple means of "
+"maintaining the required settings."
+msgstr ""
+"O comando <literal>generate</literal> é desenhado para ser executado a "
+"partir dum script cron e constrói índices de acordo com o ficheiro de "
+"configuração fornecido. A linguagem de configuração disponibiliza um meio "
+"flexível de de especificar quais ficheiros índice são construídos a partir "
+"de quais directórios, assim como disponibilizar um meio simples de manter as "
+"definições requeridas."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>clean</literal> command tidies the databases used by the given "
+"configuration file by removing any records that are no longer necessary."
+msgstr ""
+"O comando <literal>clean</literal> arruma as bases de dados usadas pelo "
+"ficheiro de configuração fornecido ao remover quaisquer registos que já não "
+"são necessários."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-ftparchive.1.xml
+msgid "The Generate Configuration"
+msgstr "A Configuração do Generate"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command uses a configuration file to "
+"describe the archives that are going to be generated. It follows the typical "
+"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-"
+"conf; contains a description of the syntax. Note that the generate "
+"configuration is parsed in sectional manner, but &apt-conf; is parsed in a "
+"tree manner. This only effects how the scope tag is handled."
+msgstr ""
+"O comando <literal>generate</literal> usa um ficheiro de configuração para "
+"descrever os arquivos que vão ser gerados. Segue o formato típico de "
+"configuração ISC como visto em ferramentas ISC como o bind 8 e dhcpd. &apt-"
+"conf; contém uma descrição da sintaxe. Note que a configuração gerada é "
+"analisada de maneira seccional, mas o &apt-conf; é analisado numa maneira de "
+"árvore. Isto apenas afecta o modo de como a etiqueta scope é manuseada."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The generate configuration has four separate sections, each described below."
+msgstr ""
+"A configuração do generate tem 4 secções separadas, cada uma descrita mais "
+"abaixo."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Dir</literal> Section"
+msgstr "Secção <literal>Dir</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Dir</literal> section defines the standard directories needed "
+"to locate the files required during the generation process. These "
+"directories are prepended certain relative paths defined in later sections "
+"to produce a complete an absolute path."
+msgstr ""
+"A secção <literal>Dir</literal> define os directórios standard necessários "
+"para localizar os ficheiros requisitados durante o processo de geração. "
+"Estes directórios precedem a certos caminhos relativos definidos em secções "
+"posteriores para produzir um caminho completo e absoluto."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the root of the FTP archive, in a standard Debian configuration "
+"this is the directory that contains the <filename>ls-LR</filename> and dist "
+"nodes."
+msgstr ""
+"Especifica a raiz do arquivo FTP, numa configuração Debian standard este é o "
+"directório que contém o <filename>ls-LR</filename> e nós da distribuição."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the override files."
+msgstr "Especifica a localização dos ficheiros de sobrepor."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the cache files."
+msgstr "Especifica a localização dos ficheiros de cache"
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the location of the file list files, if the <literal>FileList</"
+"literal> setting is used below."
projects / apt.git / blobdiff