msgstr ""
"Project-Id-Version: apt-doc 1.1.10-nl\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2016-03-27 01:30+0100\n"
+"POT-Creation-Date: 2016-08-17 23:47+0200\n"
"PO-Revision-Date: 2016-02-01 16:17+0100\n"
"Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
"Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
"systeem volledig op te waarderen."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.8.xml
+#: apt.8.xml apt-key.8.xml
msgid ","
msgstr ","
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Displays by default a deb822 formatted listing of information about all "
+#| "data files (aka index targets) <command>apt-get update</command> would "
+#| "download. Supports a <option>--format</option> option to modify the "
+#| "output format as well as accepts lines of the default output to filter "
+#| "the records by. The command is mainly used as an interface for external "
+#| "tools working with APT to get information as well as filenames for "
+#| "downloaded files so they can use them as well instead of downloading them "
+#| "again on their own. Detailed documentation is omitted here and can "
+#| "instead be found in the source tree in <literal><filename>doc/acquire-"
+#| "additional-files.txt</filename></literal>."
msgid ""
"Displays by default a deb822 formatted listing of information about all data "
"files (aka index targets) <command>apt-get update</command> would download. "
"command is mainly used as an interface for external tools working with APT "
"to get information as well as filenames for downloaded files so they can use "
"them as well instead of downloading them again on their own. Detailed "
-"documentation is omitted here and can instead be found in the source tree in "
-"<literal><filename>doc/acquire-additional-files.txt</filename></literal>."
+"documentation is omitted here and can instead be found in the file &apt-"
+"acquire-additional-files; shipped by the <package>apt-doc</package> package."
msgstr ""
"Geeft standaard een volgens deb822 ingedeelde lijst weer met informatie over "
"alle gegevensbestanden (ook soms indexbestanden of indexdoelen genoemd) die "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Show upgraded packages; print out a list of all packages that are to be "
+#| "upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
msgid ""
-"Show upgraded packages; print out a list of all packages that are to be "
-"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
+"Do not show a list of all packages that are to be upgraded. Configuration "
+"Item: <literal>APT::Get::Show-Upgraded</literal>."
msgstr ""
"Toon opgewaardeerde pakketten; geef een lijst weer van alle pakketten die "
"opgewaardeerd zullen worden. Configuratie-item: <literal>APT::Get::Show-"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml
+#, fuzzy
+#| msgid ""
+#| "Forbid the update command to acquire unverifiable data from configured "
+#| "sources. Apt will fail at the update command for repositories without "
+#| "valid cryptographically signatures. Configuration Item: "
+#| "<literal>Acquire::AllowInsecureRepositories</literal>."
msgid ""
"Forbid the update command to acquire unverifiable data from configured "
-"sources. Apt will fail at the update command for repositories without valid "
-"cryptographically signatures. Configuration Item: <literal>Acquire::"
+"sources. APT will fail at the update command for repositories without valid "
+"cryptographically signatures. See also &apt-secure; for details on the "
+"concept and the implications. Configuration Item: <literal>Acquire::"
"AllowInsecureRepositories</literal>."
msgstr ""
"Sta het commando update niet toe om niet-verifieerbare gegevens op te halen "
"u README.progress-reporting raadplegen in apt's doc-map. Configuratie-item: "
"<literal>Dpkg::Progress</literal> en <literal>Dpkg::Progress-Fancy</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. See <option>--with-source</option> description in &apt-"
+"cache; for further details."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-get.8.xml apt-cache.8.xml apt-key.8.xml apt-mark.8.xml apt.conf.5.xml
#: apt_preferences.5.xml
msgid ""
"Per default <command>depends</command> and <command>rdepends</command> print "
"only dependencies explicitly expressed in the metadata. With this flag it "
-"will also show dependencies implicitely added based on the encountered "
-"data. A <literal>Conflicts: foo</literal> e.g. expresses implicitely that "
-"this package also conflicts with the package foo from any other "
-"architecture. Configuration Item: <literal>APT::Cache::ShowImplicit</"
-"literal>."
+"will also show dependencies implicitly added based on the encountered data. "
+"A <literal>Conflicts: foo</literal> e.g. expresses implicitly that this "
+"package also conflicts with the package foo from any other architecture. "
+"Configuration Item: <literal>APT::Cache::ShowImplicit</literal>."
msgstr ""
"Standaard geven <literal>depends</literal> en <literal>rdepends</literal> "
"enkel die vereisten weer die expliciet in de metadata vermeld worden. Met "
"beperken tot pakketten die momenteel geïnstalleerd zijn. Configuratie-item: "
"<literal>APT::Cache::Installed</literal>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"Adds the given file as a source for metadata. Can be repeated to add "
+"multiple files. Supported are currently <literal>*.deb</literal>, "
+"<literal>*.dsc</literal>, <literal>*.changes</literal>, <literal>Sources</"
+"literal> and <literal>Packages</literal> files as well as source package "
+"directories. Files are matched based on their name only, not their content!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+msgid ""
+"<literal>Sources</literal> and <literal>Packages</literal> can be compressed "
+"in any format apt supports as long as they have the correct extension. If "
+"you need to store multiple of these files in one directory you can prefix a "
+"name of your choice with the last character being an underscore "
+"(\"<literal>_</literal>\"). Example: my.example_Packages.xz"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cache.8.xml
+#, fuzzy
+#| msgid ""
+#| "Use source index field ordering. Configuration Item: <literal>APT::"
+#| "SortPkgs::Source</literal>."
+msgid ""
+"Note that these sources are treated as trusted (see &apt-secure;). "
+"Configuration Item: <literal>APT::Sources::With</literal>."
+msgstr ""
+"Veldordening gebruiken bij een broncode-index. Configuratie-item: "
+"<literal>APT::SortPkgs::Source</literal>."
+
#. type: Content of: <refentry><refsect1><para>
#: apt-cache.8.xml
msgid "&apt-conf;, &sources-list;, &apt-get;"
"Pakketten die met deze sleutels geauthenticeerd werden, worden als "
"betrouwbaar beschouwd."
+#. type: Content of: <refentry><refsect1><para>
+#: apt-key.8.xml
+msgid ""
+"Note that if usage of <command>apt-key</command> is desired the additional "
+"installation of the GNU Privacy Guard suite (packaged in <package>gnupg</"
+"package>) is required. For this reason alone the programmatic usage "
+"(especially in package maintainerscripts!) is strongly discouraged. Further "
+"more the output format of all commands is undefined and can and does change "
+"whenever the underlying commands change. <command>apt-key</command> will try "
+"to detect such usage and generates warnings on stderr in these cases."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
#: apt-key.8.xml
msgid "Commands"
"werkelijkheid overeenkomt, anders wordt de &apt-secure;-infrastructuur "
"volledig ondermijnd."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Instead of using this command a keyring can be placed directly in the "
+"<filename>/etc/apt/trusted.gpg.d/</filename> directory with a descriptive "
+"name (same rules for filename apply as for &apt-conf; files) and "
+"\"<literal>gpg</literal>\" as file extension."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid "Remove a key from the list of trusted keys."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
-msgid "List trusted keys."
+#, fuzzy
+#| msgid "List trusted keys."
+msgid "List trusted keys with fingerprints."
msgstr "Betrouwbare sleutels weergeven."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "List fingerprints of trusted keys."
-msgstr "De vingerafdrukken van de betrouwbare sleutels weergeven."
-
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"secure;-infrastructuur volledig ondermijnen als het onzorgvuldig gebruikt "
"wordt."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
+#: apt-key.8.xml
+msgid "(deprecated)"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"<literal>archive-keyring</literal> van uw distributie, bijvoorbeeld het "
"pakket &keyring-package; in &keyring-distro;."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-key.8.xml
+msgid ""
+"Note that a distribution does not need to and in fact should not use this "
+"command any longer and instead ship keyring files in the <filename>/etc/apt/"
+"trusted.gpg</filename> directory directly as this avoids a dependency on "
+"<package>gnupg</package> and it is easier to manage keys by simply adding "
+"and removing files for maintainers and users alike."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-key.8.xml
msgid ""
"de primaire sleutelbos is, wat betekent dat bijvoorbeeld alle nieuwe "
"sleutels daar toegevoegd worden."
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "<filename>/etc/apt/trustdb.gpg</filename>"
-msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Local trust database of archive keys."
-msgstr "Lokale database van betrouwbare archiefsleutels."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-filename;"
-msgstr "&keyring-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive trusted keys."
-msgstr "Sleutelbos met betrouwbare sleutels van het archief &keyring-distro;."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml
-msgid "&keyring-removed-filename;"
-msgstr "&keyring-removed-filename;"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml
-msgid "Keyring of &keyring-distro; archive removed trusted keys."
-msgstr ""
-"Sleutelbos met uit het archief &keyring-distro; verwijderde betrouwbare "
-"sleutels."
-
#. type: Content of: <refentry><refsect1><para>
#: apt-key.8.xml
msgid "&apt-get;, &apt-secure;"
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "Starting with version 0.6, <command>APT</command> contains code that does "
+#| "signature checking of the Release file for all repositories. This ensures "
+#| "that data like packages in the archive can't be modified by people who "
+#| "have no access to the Release file signing key."
msgid ""
"Starting with version 0.6, <command>APT</command> contains code that does "
"signature checking of the Release file for all repositories. This ensures "
"that data like packages in the archive can't be modified by people who have "
-"no access to the Release file signing key."
+"no access to the Release file signing key. Starting with version 1.1 "
+"<command>APT</command> requires repositories to provide recent "
+"authentication information for unimpeded usage of the repository."
msgstr ""
"Met ingang van versie 0.6 bevat <command>APT</command> code die voor alle "
"pakketbronnen de ondertekening controleert van het bestand Release. Dit "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
+#, fuzzy
+#| msgid ""
+#| "If an archive has an unsigned Release file or no Release file at all "
+#| "current APT versions will raise a warning in <command>update</command> "
+#| "operations and front-ends like <command>apt-get</command> will require "
+#| "explicit confirmation if an installation request includes a package from "
+#| "such an unauthenticated archive."
msgid ""
"If an archive has an unsigned Release file or no Release file at all current "
-"APT versions will raise a warning in <command>update</command> operations "
-"and front-ends like <command>apt-get</command> will require explicit "
-"confirmation if an installation request includes a package from such an "
-"unauthenticated archive."
+"APT versions will refuse to download data from them by default in "
+"<command>update</command> operations and even if forced to download front-"
+"ends like &apt-get; will require explicit confirmation if an installation "
+"request includes a package from such an unauthenticated archive."
msgstr ""
"Indien een archief een niet-ondertekend Release-bestand of helemaal geen "
"Release-bestand heeft, zullen alle hedendaagse versies van APT een "
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
msgid ""
-"In the future APT will refuse to work with unauthenticated repositories by "
-"default until support for them is removed entirely. Users have the option to "
-"opt-in to this behavior already by setting the configuration option "
-"<option>Acquire::AllowInsecureRepositories</option> to <literal>false</"
-"literal>."
+"As a temporary exception &apt-get; (not &apt;!) raises warnings only if it "
+"encounters unauthenticated archives to give a slightly longer grace period "
+"on this backward compatibility effecting change. This exception will be "
+"removed in future releases and you can opt-out of this grace period by "
+"setting the configuration option <option>Binary::apt-get::Acquire::"
+"AllowInsecureRepositories</option> to <literal>false</literal> or <option>--"
+"no-allow-insecure-repositories</option> on the command line."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"You can force all APT clients to raise only warnings by setting the "
+"configuration option <option>Acquire::AllowInsecureRepositories</option> to "
+"<literal>true</literal>. Individual repositories can also be allowed to be "
+"insecure via the &sources-list; option <literal>allow-insecure=yes</"
+"literal>. Note that insecure repositories are strongly discouraged and all "
+"options to force apt to continue supporting them will eventually be "
+"removed. Users also have the <option>Trusted</option> option available to "
+"disable even the warnings, but be sure to understand the implications as "
+"detailed in &sources-list;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-secure.8.xml
+msgid ""
+"A repository which previously was authentication but would loose this state "
+"in an <command>update</command> operation raises an error in all APT clients "
+"irrespective of the option to allow or forbid usage of insecure "
+"repositories. The error can be overcome by additionally setting "
+"<option>Acquire::AllowDowngradeToInsecureRepositories</option> to "
+"<literal>true</literal> or for Individual repositories with the &sources-"
+"list; option <literal>allow-downgrade-to-insecure=yes</literal>."
msgstr ""
-"In de toekomst zal APT standaard weigeren om met niet-geauthenticeerde "
-"pakketbronnen te werken totdat die helemaal niet meer ondersteund zullen "
-"worden. Gebruikers hebben de mogelijkheid om nu reeds voor dit gedrag te "
-"kiezen door de configuratieoptie <option>Acquire::AllowInsecureRepositories</"
-"option> in te stellen op <literal>false</literal>."
#. type: Content of: <refentry><refsect1><para>
#: apt-secure.8.xml
"geregistreerd worden via het commando <command>dpkg --add-architecture</"
"command>."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+msgid ""
+"This scope defines which compression formats are supported, how compression "
+"and decompression can be performed if support for this format isn't built "
+"into apt directly and a cost-value indicating how costly it is to compress "
+"something in this format. As an example the following configuration stanza "
+"would allow apt to download and uncompress as well as create and store files "
+"with the low-cost <literal>.reversed</literal> file extension which it will "
+"pass to the command <command>rev</command> without additional commandline "
+"parameters for compression and uncompression:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><informalexample><programlisting>
+#: apt.conf.5.xml
+#, no-wrap
+msgid ""
+"APT::Compressor::rev {\n"
+"\tName \"rev\";\n"
+"\tExtension \".reversed\";\n"
+"\tBinary \"rev\";\n"
+"\tCompressArg {};\n"
+"\tUncompressArg {};\n"
+"\tCost \"10\";\n"
+"};\n"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to "
+#| "specify an external command to discover the http proxy to use. Apt "
+#| "expects the command to output the proxy on stdout in the style "
+#| "<literal>http://proxy:port/</literal>. This will override the generic "
+#| "<literal>Acquire::http::Proxy</literal> but not any specific host proxy "
+#| "configuration set via <literal>Acquire::http::Proxy::$HOST</literal>. "
+#| "See the &squid-deb-proxy-client; package for an example implementation "
+#| "that uses avahi. This option takes precedence over the legacy option name "
+#| "<literal>ProxyAutoDetect</literal>."
msgid ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
-"an external command to discover the http proxy to use. Apt expects the "
-"command to output the proxy on stdout in the style <literal>http://proxy:"
-"port/</literal>. This will override the generic <literal>Acquire::http::"
-"Proxy</literal> but not any specific host proxy configuration set via "
-"<literal>Acquire::http::Proxy::$HOST</literal>. See the &squid-deb-proxy-"
-"client; package for an example implementation that uses avahi. This option "
-"takes precedence over the legacy option name <literal>ProxyAutoDetect</"
-"literal>."
+"an external command to discover the http proxy to use. The first and only "
+"parameter is an URI denoting the host to be contacted to allow for host-"
+"specific configuration. APT expects the command to output the proxy on "
+"stdout as a single line in the style <literal>http://proxy:port/</literal> "
+"or the word <literal>DIRECT</literal> if no proxy should be used. No output "
+"indicates that the generic proxy settings should be used. Note that auto-"
+"detection will not be used for a host if a host-specific proxy configuration "
+"is already set via <literal>Acquire::http::Proxy::<replaceable>HOST</"
+"replaceable></literal>. See the &squid-deb-proxy-client; package for an "
+"example implementation that uses avahi. This option takes precedence over "
+"the legacy option name <literal>ProxyAutoDetect</literal>."
msgstr ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> kan gebruikt worden om "
"een extern commando op te geven om de te gebruiken http-proxy te vinden. Apt "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "List of compression types which are understood by the acquire methods. "
+#| "Files like <filename>Packages</filename> can be available in various "
+#| "compression formats. By default the acquire methods can decompress "
+#| "<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
+#| "command> compressed files; with this setting more formats can be added on "
+#| "the fly or the used method can be changed. The syntax for this is: "
+#| "<placeholder type=\"synopsis\" id=\"0\"/>"
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
-"compression formats. By default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files; with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
+"compression formats. By default the acquire methods can decompress and "
+"recompress many common formats like <command>xz</command> and <command>gzip</"
+"command>; with this scope the supported formats can be queried, modified as "
+"well as support for more formats added (see also <option>APT::Compressor</"
+"
option>). The syntax for this is: <placeholder type=\"synopsis\" id=\"0\"/>"
msgstr ""
"Lijst van compressietypes die door de methodes voor het ophalen van "
"pakketten begrepen worden. Bestanden zoals <filename>Packages</filename> "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
#: apt.conf.5.xml
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+#, fuzzy, no-wrap
+#| msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
+msgid "Acquire::CompressionTypes::Order { \"xz\"; \"gz\"; };"
msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Also, the <literal>Order</literal> subgroup can be used to define in "
+#| "which order the acquire system will try to download the compressed files. "
+#| "The acquire system will try the first and proceed with the next "
+#| "compression type in this list on error, so to prefer one over the other "
+#| "type simply add the preferred type first - default types not already "
+#| "added will be implicitly appended to the end of the list, so e.g. "
+#| "<placeholder type=\"synopsis\" id=\"0\"/> can be used to prefer "
+#| "<command>gzip</command> compressed files over <command>bzip2</command> "
+#| "and <command>lzma</command>. If <command>lzma</command> should be "
+#| "preferred over <command>gzip</command> and <command>bzip2</command> the "
+#| "configure setting should look like this: <placeholder type=\"synopsis\" "
+#| "id=\"1\"/> It is not needed to add <literal>bz2</literal> to the list "
+#| "explicitly as it will be added automatically."
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"acquire system will try the first and proceed with the next compression type "
"in this list on error, so to prefer one over the other type simply add the "
-"preferred type first - default types not already added will be implicitly "
-"appended to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this: "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> to the list explicitly as it will be added "
-"automatically."
+"preferred type first - types not already added will be implicitly appended "
+"to the end of the list, so e.g. <placeholder type=\"synopsis\" id=\"0\"/> "
+"can be used to prefer <command>gzip</command> compressed files over all "
+"other compression formats. If <command>xz</command> should be preferred "
+"over <command>gzip</command> and <command>bzip2</command> the configure "
+"setting should look like this: <placeholder type=\"synopsis\" id=\"1\"/> It "
+"is not needed to add <literal>bz2</literal> to the list explicitly as it "
+"will be added automatically."
msgstr ""
"Voorts kan de subgroep <literal>Order</literal> gebruikt worden om te "
"bepalen in welke volgorde het ophaalsysteem de gecomprimeerde bestanden zal "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
+#| "literal> will be checked at run time. If this option has been set, the "
+#| "method will only be used if this file exists; e.g. for the "
+#| "<literal>bzip2</literal> method (the inbuilt) setting is: <placeholder "
+#| "type=\"literallayout\" id=\"0\"/> Note also that list entries specified "
+#| "on the command line will be added at the end of the list specified in the "
+#| "configuration files, but before the default entries. To prefer a type in "
+#| "this case over the ones specified in the configuration files you can set "
+#| "the option direct - not in list style. This will not override the "
+#| "defined list; it will only prefix the list with this type."
msgid ""
"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
-"literal> will be checked at run time. If this option has been set, the "
-"method will only be used if this file exists; e.g. for the <literal>bzip2</"
-"literal> method (the inbuilt) setting is: <placeholder type=\"literallayout"
-"\" id=\"0\"/> Note also that list entries specified on the command line will "
-"be added at the end of the list specified in the configuration files, but "
-"before the default entries. To prefer a type in this case over the ones "
-"specified in the configuration files you can set the option direct - not in "
-"list style. This will not override the defined list; it will only prefix "
-"the list with this type."
+"literal> will be checked at run time. If this option has been set and "
+"support for this format isn't directly built into apt, the method will only "
+"be used if this file exists; e.g. for the <literal>bzip2</literal> method "
+"(the inbuilt) setting is: <placeholder type=\"literallayout\" id=\"0\"/> "
+"Note also that list entries specified on the command line will be added at "
+"the end of the list specified in the configuration files, but before the "
+"default entries. To prefer a type in this case over the ones specified in "
+"the configuration files you can set the option direct - not in list style. "
+"This will not override the defined list; it will only prefix the list with "
+"this type."
msgstr ""
"Merk op dat op het ogenblik van uitvoering gekeken zal worden naar "
"<literal>Dir::Bin::<replaceable>Naam-van-de-Methode</replaceable></literal>. "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
-"Allow the update operation to load data files from a repository without a "
-"trusted signature. If enabled this option no data files will be loaded and "
-"the update operation fails with a error for this source. The default is "
-"false for backward compatibility. This will be changed in the future."
+"Allow update operations to load data files from repositories without "
+"sufficient security information. The default value is \"<literal>false</"
+"literal>\". Concept, implications as well as alternatives are detailed in "
+"&apt-secure;."
msgstr ""
-"De bewerking update toelaten om databestanden op te halen van een pakketbron "
-"zonder een betrouwbare ondertekening. Indien deze optie geactiveerd is, "
-"zullen geen databestanden opgehaald worden en zal de update-bewerking voor "
-"deze pakketbron mislukken met een foutmelding. Omwille van achterwaartse "
-"compatibiliteit is de standaard false (uitgezet). In de toekomst zal dit "
-"veranderen."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
+"Allow update operations to load data files from repositories which provide "
+"security information, but these are deemed no longer cryptographically "
+"strong enough. The default value is \"<literal>false</literal>\". Concept, "
+"implications as well as alternatives are detailed in &apt-secure;."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "Allow that a repository that was previously gpg signed to become unsigned "
+#| "durign a update operation. When there is no valid signature of a "
+#| "previously trusted repository apt will refuse the update. This option can "
+#| "be used to override this protection. You almost certainly never want to "
+#| "enable this. The default is false. Note that apt will still consider "
+#| "packages from this source untrusted and warn about them if you try to "
+#| "install them."
+msgid ""
"Allow that a repository that was previously gpg signed to become unsigned "
-"durign a update operation. When there is no valid signature of a perviously "
-"trusted repository apt will refuse the update. This option can be used to "
-"override this protection. You almost certainly never want to enable this. "
-"The default is false. Note that apt will still consider packages from this "
-"source untrusted and warn about them if you try to install them."
+"during an update operation. When there is no valid signature for a "
+"previously trusted repository apt will refuse the update. This option can be "
+"used to override this protection. You almost certainly never want to enable "
+"this. The default is <literal>false</literal>. Concept, implications as "
+"well as alternatives are detailed in &apt-secure;."
msgstr ""
"Toelaten dat een pakketbron die voorheen een gpg-ondertekening had, tijdens "
"een update-bewerking niet langer ondertekend is. Als een pakketbron die "
"van pakketten. Het standaardgedrag is om ondertekening uit te zetten en alle "
"binaire bestanden te produceren."
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml
-msgid "dpkg trigger usage (and related options)"
-msgstr "het gebruik van triggers door dpkg (en gerelateerde opties)"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"APT can call &dpkg; in such a way as to let it make aggressive use of "
-"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
-"use triggers once each time it runs. Activating these options can therefore "
-"decrease the time needed to perform the install or upgrade. Note that it is "
-"intended to activate these options per default in the future, but as it "
-"drastically changes the way APT calls &dpkg; it needs a lot more testing. "
-"<emphasis>These options are therefore currently experimental and should not "
-"be used in production environments.</emphasis> It also breaks progress "
-"reporting such that all front-ends will currently stay around half (or more) "
-"of the time in the 100% state while it actually configures all packages."
-msgstr ""
-"APT kan &dpkg; zodanig aanroepen dat het op een agressieve manier gebruik "
-"maakt van triggers in de loop van de verschillende stappen waarin &dpkg; "
-"aangeroepen wordt. Zonder extra opties zal &dpkg; een keer gebruik maken van "
-"triggers tijdens iedere uitvoering. Het activeren van deze opties kan daarom "
-"de tijd beperken die nodig is voor het uitvoeren van een installatie of een "
-"opwaardering. Merk op dat het de bedoeling is om deze opties in de toekomst "
-"standaard te activeren, maar aangezien het op een drastische manier ingrijpt "
-"op de manier waarop APT &dpkg; aanroept, is grondiger testen noodzakelijk. "
-"<emphasis>Deze opties worden daarom momenteel als experimenteel beschouwd en "
-"worden best niet in productieomgevingen gebruikt.</emphasis> Ook de "
-"voortgangsindicatie wordt erdoor ontregeld, met als gevolg dat die bij alle "
-"front-ends momenteel ongeveer de helft van de tijd (of langer) op 100% "
-"voltooid blijft staan, terwijl ondertussen de configuratie van alle "
-"pakketten aan de gang is."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them, create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking &dpkg; for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Merk op dat er geen garantie bestaat dat APT deze opties zal blijven "
-"ondersteunen of dat ze in de toekomst geen (grote) problemen zullen "
-"veroorzaken. Indien u een goed begrip heeft van de actuele risico's en "
-"problemen met deze opties, maar moedig genoeg bent om ze te helpen testen, "
-"maakt u best een nieuw configuratiebestand aan om een combinatie van opties "
-"te testen. Gelieve bugs, problemen en verbeteringen die u bent tegengekomen "
-"te rapporteren en vergeet in uw rapport zeker niet te vermelden welke opties "
-"u gebruikte. Ook &dpkg; om hulp vragen kan nuttig zijn met het oog op het "
-"opsporen van problemen, zie bijvoorbeeld <command>dpkg --audit</command>. "
-"Een defensieve combinatie van opties zou <placeholder type=\"literallayout\" "
-"id=\"0\"/> zijn."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: &dpkg; will not run the triggers when this flag is present unless it "
-"is explicitly called to do so in an extra call. Note that this option "
-"exists (undocumented) also in older APT versions with a slightly different "
-"meaning: Previously these option only append --no-triggers to the configure "
-"calls to &dpkg; - now APT will also add this flag to the unpack and remove "
-"calls."
-msgstr ""
-"De vlag \"geen triggers\" toevoegen aan alle aanroepen van &dpkg; (behalve "
-"voor de aanroep ConfigurePending). Raadpleeg &dpkg; indien u geïnteresseerd "
-"bent in wat dit daadwerkelijk betekent. In het kort: als deze vlag aanwezig "
-"is, zal &dpkg; de triggers niet uitvoeren tenzij het in een extra aanroep "
-"expliciet opgedragen wordt dat wel te doen. Merk op dat deze optie in een "
-"lichtjes andere betekenis (ongedocumenteerd) ook in oudere versies van APT "
-"aanwezig is: vroeger voegde deze optie enkel --no-triggers toe aan de "
-"configure-aanroep van &dpkg; - nu voegt APT deze vlag ook toe aan de "
-"aanroepen unpack en remove."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
-"\", which causes APT to configure all packages. The \"<literal>smart</"
-"literal>\" way is to configure only packages which need to be configured "
-"before another package can be unpacked (Pre-Depends), and let the rest be "
-"configured by &dpkg; with a call generated by the ConfigurePending option "
-"(see below). On the other hand, \"<literal>no</literal>\" will not configure "
-"anything, and totally relies on &dpkg; for configuration (which at the "
-"moment will fail if a Pre-Depends is encountered). Setting this option to "
-"any value other than <literal>all</literal> will implicitly also activate "
-"the next option by default, as otherwise the system could end in an "
-"unconfigured and potentially unbootable state."
-msgstr ""
-"Geldige waarden zijn \"<literal>all</literal>\", \"<literal>smart</literal>"
-"\" en \"<literal>no</literal>\". De standaardwaarde is \"<literal>all</"
-"literal>\", die APT ertoe aanzet om alle pakketten te configureren. De "
-"\"<literal>smart</literal>\"-manier bestaat erin om enkel die pakketten te "
-"configureren die geconfigureerd moeten zijn vooraleer een ander pakket "
-"uitgepakt kan worden (Pre-Depends (voorvereisten)) en de configuratie van de "
-"andere pakketten over te laten aan &dpkg; tijdens een door de optie "
-"ConfigurePending geïnitieerde aanroep (zie later). Anderzijds zal "
-"\"<literal>no</literal>\" helemaal niets configureren en volledig op &dpkg; "
-"vertrouwen voor de configuratie (hetgeen momenteel zal mislukken als er een "
-"Pre-Depends opduikt). Deze optie instellen op iets anders dan <literal>all</"
-"literal> zal standaard impliciet ook de volgende optie activeren. Anders "
-"bestaat het gevaar dat het systeem in een niet-geconfigureerde en niet op te "
-"starten toestand achterblijft."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
+#, fuzzy
+#| msgid ""
+#| "If this option is set APT will call <command>dpkg --configure --pending</"
+#| "command> to let &dpkg; handle all required configurations and triggers. "
+#| "This option is activated automatically per default if the previous option "
+#| "is not set to <literal>all</literal>, but deactivating it could be useful "
+#| "if you want to run APT multiple times in a row - e.g. in an installer. In "
+#| "these sceneries you could deactivate this option in all but the last run."
msgid ""
"If this option is set APT will call <command>dpkg --configure --pending</"
"command> to let &dpkg; handle all required configurations and triggers. This "
-"option is activated automatically per default if the previous option is not "
-"set to <literal>all</literal>, but deactivating it could be useful if you "
-"want to run APT multiple times in a row - e.g. in an installer. In these "
-"sceneries you could deactivate this option in all but the last run."
+"option is activated by default, but deactivating it could be useful if you "
+"want to run APT multiple times in a row - e.g. in an installer. In this "
+"scenario you could deactivate this option in all but the last run."
msgstr ""
"Indien deze optie ingesteld staat zal APT <command>dpkg --configure --"
"pending</command> aanroepen om &dpkg; alle nodige configuraties en triggers "
"dergelijk scenario kunt u deze optie uitschakelen voor alle keren dat APT "
"uitgevoerd wordt, behalve voor de laatste keer."
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Useful for the <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal>, and "
-"&dpkg; treats them as <literal>unpacked</literal> currently which is a "
-"showstopper for Pre-Dependencies (see debbugs #526774). Note that this will "
-"process all triggers, not only the triggers needed to configure this package."
-msgstr ""
-"Nuttig voor de configuratie-instelling <literal>smart</literal>, vermits een "
-"pakket met wachtende triggers niet als <literal>installed</literal> "
-"(geïnstalleerd) beschouwd wordt en &dpkg; een dergelijk pakket momenteel als "
-"<literal>unpacked</literal> (niet uitgepakt) behandelt, hetgeen een "
-"hinderpaal is bij voorvereisten (zie Debian bug #526774). Merk op dat dit "
-"alle triggers verwerkt, niet enkel de triggers die nodig zijn om dit pakket "
-"te configureren."
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml
-msgid ""
-"Essential packages (and their dependencies) should be configured immediately "
-"after unpacking. It is a good idea to do this quite early in the upgrade "
-"process as these configure calls also currently require <literal>DPkg::"
-"TriggersPending</literal> which will run quite a few triggers (which may not "
-"be needed). Essentials get per default a high score but the immediate flag "
-"is relatively low (a package which has a Pre-Depends is rated higher). "
-"These option and the others in the same group can be used to change the "
-"scoring. The following example shows the settings with their default "
-"values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-"Essentiële pakketten (en de pakketten waarvan zij afhankelijk zijn) zouden "
-"onmiddellijk geconfigureerd moeten worden nadat ze uitgepakt zijn. Het wordt "
-"aanbevolen om dit vrij vroeg in het opwaarderingsproces te doen aangezien "
-"deze configure-aanroepen momenteel ook <literal>DPkg::TriggersPending</"
-"literal> uitlokken, waardoor behoorlijk wat triggers afgehandeld kunnen "
-"worden (wat misschien niet nodig is). Essentiële pakketten krijgen per "
-"definitie een hoge score maar de vlag immediate heeft een relatief lage "
-"score (een pakket met een voorvereiste krijgt een hogere score). Deze optie "
-"en de andere uit dezelfde groep kunnen gebruikt worden om de score aan te "
-"passen. Het volgende voorbeeld toont de instellingen met hun "
-"standaardwaarden. <placeholder type=\"literallayout\" id=\"0\"/>"
-
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
msgid "Periodic and Archives options"
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
-"<literal>/etc/cron.daily/apt</literal> script. See the top of this script "
-"for the brief documentation of these options."
+"<literal>/usr/lib/apt/apt.systemd.daily</literal> script. See the top of "
+"this script for the brief documentation of these options."
msgstr ""
"De optiegroepen <literal>APT::Periodic</literal> en <literal>APT::Archives</"
"literal> configureren het gedrag van de periodieke bijwerkingen die door apt "
-"uitgevoerd worden en die door het script <literal>/etc/cron.daily/apt</"
-"literal> uitgelokt worden. Raadpleeg het begin van dit script voor een "
-"beknopte documentatie over deze opties."
+"uitgevoerd worden en die door het script <literal>/usr/lib/apt/apt.systemd."
+"daily</literal> uitgelokt worden. Raadpleeg het begin van dit script voor "
+"een beknopte documentatie over deze opties."
#. type: Content of: <refentry><refsect1><title>
#: apt.conf.5.xml
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<option>Targets</option> (<option>target</option>) is a multivalue option "
+#| "defining which download targets apt will try to acquire from this source. "
+#| "If not specified, the default set is defined by the <option>Acquire::"
+#| "IndexTargets</option> configuration scope. Additionally, specific "
+#| "targets can be enabled or disabled by using the identifier as field name "
+#| "instead of using this multivalue option."
msgid ""
"<option>Targets</option> (<option>target</option>) is a multivalue option "
"defining which download targets apt will try to acquire from this source. If "
"not specified, the default set is defined by the <option>Acquire::"
-"IndexTargets</option> configuration scope. Additionally, specific targets "
-"can be enabled or disabled by using the identifier as field name instead of "
-"using this multivalue option."
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
msgstr ""
"<option>Targets</option> (<option>target</option>) is een multi-waarde optie "
"waarmee opgegeven wordt welke downloaddoelen apt uit deze pakketbron zal "
"dergelijke anomalieën manifesteren, zal APT ze proberen te ontdekken en "
"verbeteren."
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
msgid ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<option>Signed-By</option> (<option>signed-by</option>) is either an "
+#| "absolute path to a keyring file (has to be accessible and readable for "
+#| "the <literal>_apt</literal> user, so ensure everyone has read-permissions "
+#| "on the file) or a fingerprint of a key either in the <filename>trusted."
+#| "gpg</filename> keyring or in one of the keyrings in the <filename>trusted."
+#| "gpg.d/</filename> directory (see <command>apt-key fingerprint</command>). "
+#| "If the option is set, only the key(s) in this keyring or only the key "
+#| "with this fingerprint is used for the &apt-secure; verification of this "
+#| "repository. Otherwise all keys in the trusted keyrings are considered "
+#| "valid signers for this repository."
msgid ""
"<option>Signed-By</option> (<option>signed-by</option>) is either an "
"absolute path to a keyring file (has to be accessible and readable for the "
"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
-"file) or a fingerprint of a key either in the <filename>trusted.gpg</"
-"filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</"
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
"filename> directory (see <command>apt-key fingerprint</command>). If the "
-"option is set, only the key(s) in this keyring or only the key with this "
-"fingerprint is used for the &apt-secure; verification of this repository. "
-"Otherwise all keys in the trusted keyrings are considered valid signers for "
-"this repository."
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
msgstr ""
"<option>Signed-By</option> (<option>signed-by</option>) is ofwel een "
"absoluut pad naar een sleutelbosbestand (moet toegankelijk zijn voor en te "
#: sources.list.5.xml
#, no-wrap
msgid ""
-"deb http://httpredir.debian.org/debian &debian-stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &debian-stable-codename; main"
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
msgstr ""
-"deb http://httpredir.debian.org/debian &debian-stable-codename; main\n"
-"deb [ arch=amd64,armel ] http://httpredir.debian.org/debian &debian-stable-codename; main"
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, no-wrap
msgid ""
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"\n"
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"Architectures: amd64 armel\n"
msgstr ""
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"\n"
"Types: deb\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: &debian-stable-codename;\n"
"Components: main\n"
"Architectures: amd64 armel\n"
#: sources.list.5.xml
#, no-wrap
msgid ""
-"deb http://httpredir.debian.org/debian stable main contrib\n"
-"deb-src http://httpredir.debian.org/debian stable main contrib\n"
-"deb http://httpredir.debian.org/debian testing main contrib\n"
-"deb-src http://httpredir.debian.org/debian testing main contrib\n"
-"deb http://httpredir.debian.org/debian unstable main contrib\n"
-"deb-src http://httpredir.debian.org/debian unstable main contrib"
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
msgstr ""
-"deb http://httpredir.debian.org/debian stable main contrib\n"
-"deb-src http://httpredir.debian.org/debian stable main contrib\n"
-"deb http://httpredir.debian.org/debian testing main contrib\n"
-"deb-src http://httpredir.debian.org/debian testing main contrib\n"
-"deb http://httpredir.debian.org/debian unstable main contrib\n"
-"deb-src http://httpredir.debian.org/debian unstable main contrib"
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
#. type: Content of: <refentry><refsect1><literallayout>
#: sources.list.5.xml
#, no-wrap
msgid ""
"Types: deb deb-src\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: stable testing unstable\n"
"Components: main contrib\n"
msgstr ""
"Types: deb deb-src\n"
-"URIs: http://httpredir.debian.org/debian\n"
+"URIs: http://deb.debian.org/debian\n"
"Suites: stable testing unstable\n"
"Components: main contrib\n"
#. type: Content of: <refentry><refsect1><para>
#: sources.list.5.xml
-msgid "&apt-get;, &apt-conf;"
-msgstr "&apt-get;, &apt-conf;"
+#, fuzzy
+#| msgid "&apt-cache;, &apt-config;, &apt-preferences;."
+msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
+msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
#. type: Content of: <refentry><refmeta><manvolnum>
#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>release</literal> command generates a Release file from a "
+#| "directory tree. It recursively searches the given directory for "
+#| "uncompressed <filename>Packages</filename> and <filename>Sources</"
+#| "filename> files and ones compressed with <command>gzip</command>, "
+#| "<command>bzip2</command> or <command>lzma</command> as well as "
+#| "<filename>Release</filename> and <filename>md5sum.txt</filename> files by "
+#| "default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+#| "Additional filename patterns can be added by listing them in "
+#| "<literal>APT::FTPArchive::Release::Patterns</literal>. It then writes to "
+#| "stdout a <filename>Release</filename> file containing (by default) an "
+#| "MD5, SHA1, SHA256 and SHA512 digest for each file."
msgid ""
"The <literal>release</literal> command generates a Release file from a "
"directory tree. It recursively searches the given directory for uncompressed "
-"<filename>Packages</filename> and <filename>Sources</filename> files and "
-"ones compressed with <command>gzip</command>, <command>bzip2</command> or "
-"<command>lzma</command> as well as <filename>Release</filename> and "
-"<filename>md5sum.txt</filename> files by default (<literal>APT::FTPArchive::"
-"Release::Default-Patterns</literal>). Additional filename patterns can be "
-"added by listing them in <literal>APT::FTPArchive::Release::Patterns</"
-"literal>. It then writes to stdout a <filename>Release</filename> file "
-"containing (by default) an MD5, SHA1, SHA256 and SHA512 digest for each file."
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
msgstr ""
"Het commando <literal>release</literal> maakt voor een mappenboom een "
"Release-bestand aan. Het begint bij de opgegeven map en zoekt daar en in de "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Values for the additional metadata fields in the Release file are taken "
+#| "from the corresponding variables under <literal>APT::FTPArchive::Release</"
+#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+#| "supported fields are: <literal>Origin</literal>, <literal>Label</"
+#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-"
+#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</"
+#| "literal>, <literal>Description</literal>."
msgid ""
"Values for the additional metadata fields in the Release file are taken from "
"the corresponding variables under <literal>APT::FTPArchive::Release</"
-"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
-"supported fields are: <literal>Origin</literal>, <literal>Label</literal>, "
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
-"<literal>Architectures</literal>, <literal>Components</literal>, "
-"<literal>Description</literal>."
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
msgstr ""
"De waarden voor de bijkomende velden met metagegevens in het Release-bestand "
"worden ontleend aan de overeenkomstige variabelen uit <literal>APT::"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Sets the default compression schemes to use for the package index files. "
+#| "It is a string that contains a space separated list of at least one of: "
+#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression "
+#| "schemes is '. gzip'."
msgid ""
"Sets the default compression schemes to use for the package index files. It "
-"is a string that contains a space separated list of at least one of: '.' (no "
-"compression), 'gzip' and 'bzip2'. The default for all compression schemes is "
-"'. gzip'."
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope. The default for all compression schemes is '. gzip'."
msgstr ""
"Stelt het standaard compressieschema in dat voor de pakketindexbestanden "
"gebruikt wordt. Het is een tekenreeks die bestaat uit een door spaties "
msgstr ""
"En dit zal gebruik maken van de reeds opgehaalde archieven op de schijf."
+#~ msgid "dpkg trigger usage (and related options)"
+#~ msgstr "het gebruik van triggers door dpkg (en gerelateerde opties)"
+
+#~ msgid ""
+#~ "APT can call &dpkg; in such a way as to let it make aggressive use of "
+#~ "triggers over multiple calls of &dpkg;. Without further options &dpkg; "
+#~ "will use triggers once each time it runs. Activating these options can "
+#~ "therefore decrease the time needed to perform the install or upgrade. "
+#~ "Note that it is intended to activate these options per default in the "
+#~ "future, but as it drastically changes the way APT calls &dpkg; it needs a "
+#~ "lot more testing. <emphasis>These options are therefore currently "
+#~ "experimental and should not be used in production environments.</"
+#~ "emphasis> It also breaks progress reporting such that all front-ends will "
+#~ "currently stay around half (or more) of the time in the 100% state while "
+#~ "it actually configures all packages."
+#~ msgstr ""
+#~ "APT kan &dpkg; zodanig aanroepen dat het op een agressieve manier gebruik "
+#~ "maakt van triggers in de loop van de verschillende stappen waarin &dpkg; "
+#~ "aangeroepen wordt. Zonder extra opties zal &dpkg; een keer gebruik maken "
+#~ "van triggers tijdens iedere uitvoering. Het activeren van deze opties kan "
+#~ "daarom de tijd beperken die nodig is voor het uitvoeren van een "
+#~ "installatie of een opwaardering. Merk op dat het de bedoeling is om deze "
+#~ "opties in de toekomst standaard te activeren, maar aangezien het op een "
+#~ "drastische manier ingrijpt op de manier waarop APT &dpkg; aanroept, is "
+#~ "grondiger testen noodzakelijk. <emphasis>Deze opties worden daarom "
+#~ "momenteel als experimenteel beschouwd en worden best niet in "
+#~ "productieomgevingen gebruikt.</emphasis> Ook de voortgangsindicatie wordt "
+#~ "erdoor ontregeld, met als gevolg dat die bij alle front-ends momenteel "
+#~ "ongeveer de helft van de tijd (of langer) op 100% voltooid blijft staan, "
+#~ "terwijl ondertussen de configuratie van alle pakketten aan de gang is."
+
+#~ msgid ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+#~ msgstr ""
+#~ "DPkg::NoTriggers \"true\";\n"
+#~ "PackageManager::Configure \"smart\";\n"
+#~ "DPkg::ConfigurePending \"true\";\n"
+#~ "DPkg::TriggersPending \"true\";"
+
+#~ msgid ""
+#~ "Note that it is not guaranteed that APT will support these options or "
+#~ "that these options will not cause (big) trouble in the future. If you "
+#~ "have understand the current risks and problems with these options, but "
+#~ "are brave enough to help testing them, create a new configuration file "
+#~ "and test a combination of options. Please report any bugs, problems and "
+#~ "improvements you encounter and make sure to note which options you have "
+#~ "used in your reports. Asking &dpkg; for help could also be useful for "
+#~ "debugging proposes, see e.g. <command>dpkg --audit</command>. A defensive "
+#~ "option combination would be <placeholder type=\"literallayout\" id=\"0\"/>"
+#~ msgstr ""
+#~ "Merk op dat er geen garantie bestaat dat APT deze opties zal blijven "
+#~ "ondersteunen of dat ze in de toekomst geen (grote) problemen zullen "
+#~ "veroorzaken. Indien u een goed begrip heeft van de actuele risico's en "
+#~ "problemen met deze opties, maar moedig genoeg bent om ze te helpen "
+#~ "testen, maakt u best een nieuw configuratiebestand aan om een combinatie "
+#~ "van opties te testen. Gelieve bugs, problemen en verbeteringen die u bent "
+#~ "tegengekomen te rapporteren en vergeet in uw rapport zeker niet te "
+#~ "vermelden welke opties u gebruikte. Ook &dpkg; om hulp vragen kan nuttig "
+#~ "zijn met het oog op het opsporen van problemen, zie bijvoorbeeld "
+#~ "<command>dpkg --audit</command>. Een defensieve combinatie van opties zou "
+#~ "<placeholder type=\"literallayout\" id=\"0\"/> zijn."
+
+#~ msgid ""
+#~ "Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
+#~ "call). See &dpkg; if you are interested in what this actually means. In "
+#~ "short: &dpkg; will not run the triggers when this flag is present unless "
+#~ "it is explicitly called to do so in an extra call. Note that this option "
+#~ "exists (undocumented) also in older APT versions with a slightly "
+#~ "different meaning: Previously these option only append --no-triggers to "
+#~ "the configure calls to &dpkg; - now APT will also add this flag to the "
+#~ "unpack and remove calls."
+#~ msgstr ""
+#~ "De vlag \"geen triggers\" toevoegen aan alle aanroepen van &dpkg; "
+#~ "(behalve voor de aanroep ConfigurePending). Raadpleeg &dpkg; indien u "
+#~ "geïnteresseerd bent in wat dit daadwerkelijk betekent. In het kort: als "
+#~ "deze vlag aanwezig is, zal &dpkg; de triggers niet uitvoeren tenzij het "
+#~ "in een extra aanroep expliciet opgedragen wordt dat wel te doen. Merk op "
+#~ "dat deze optie in een lichtjes andere betekenis (ongedocumenteerd) ook in "
+#~ "oudere versies van APT aanwezig is: vroeger voegde deze optie enkel --no-"
+#~ "triggers toe aan de configure-aanroep van &dpkg; - nu voegt APT deze vlag "
+#~ "ook toe aan de aanroepen unpack en remove."
+
+#~ msgid ""
+#~ "Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
+#~ "and \"<literal>no</literal>\". The default value is \"<literal>all</"
+#~ "literal>\", which causes APT to configure all packages. The "
+#~ "\"<literal>smart</literal>\" way is to configure only packages which need "
+#~ "to be configured before another package can be unpacked (Pre-Depends), "
+#~ "and let the rest be configured by &dpkg; with a call generated by the "
+#~ "ConfigurePending option (see below). On the other hand, \"<literal>no</"
+#~ "literal>\" will not configure anything, and totally relies on &dpkg; for "
+#~ "configuration (which at the moment will fail if a Pre-Depends is "
+#~ "encountered). Setting this option to any value other than <literal>all</"
+#~ "literal> will implicitly also activate the next option by default, as "
+#~ "otherwise the system could end in an unconfigured and potentially "
+#~ "unbootable state."
+#~ msgstr ""
+#~ "Geldige waarden zijn \"<literal>all</literal>\", \"<literal>smart</"
+#~ "literal>\" en \"<literal>no</literal>\". De standaardwaarde is "
+#~ "\"<literal>all</literal>\", die APT ertoe aanzet om alle pakketten te "
+#~ "configureren. De \"<literal>smart</literal>\"-manier bestaat erin om "
+#~ "enkel die pakketten te configureren die geconfigureerd moeten zijn "
+#~ "vooraleer een ander pakket uitgepakt kan worden (Pre-Depends "
+#~ "(voorvereisten)) en de configuratie van de andere pakketten over te laten "
+#~ "aan &dpkg; tijdens een door de optie ConfigurePending geïnitieerde "
+#~ "aanroep (zie later). Anderzijds zal \"<literal>no</literal>\" helemaal "
+#~ "niets configureren en volledig op &dpkg; vertrouwen voor de configuratie "
+#~ "(hetgeen momenteel zal mislukken als er een Pre-Depends opduikt). Deze "
+#~ "optie instellen op iets anders dan <literal>all</literal> zal standaard "
+#~ "impliciet ook de volgende optie activeren. Anders bestaat het gevaar dat "
+#~ "het systeem in een niet-geconfigureerde en niet op te starten toestand "
+#~ "achterblijft."
+
+#~ msgid ""
+#~ "Useful for the <literal>smart</literal> configuration as a package which "
+#~ "has pending triggers is not considered as <literal>installed</literal>, "
+#~ "and &dpkg; treats them as <literal>unpacked</literal> currently which is "
+#~ "a showstopper for Pre-Dependencies (see debbugs #526774). Note that this "
+#~ "will process all triggers, not only the triggers needed to configure this "
+#~ "package."
+#~ msgstr ""
+#~ "Nuttig voor de configuratie-instelling <literal>smart</literal>, vermits "
+#~ "een pakket met wachtende triggers niet als <literal>installed</literal> "
+#~ "(geïnstalleerd) beschouwd wordt en &dpkg; een dergelijk pakket momenteel "
+#~ "als <literal>unpacked</literal> (niet uitgepakt) behandelt, hetgeen een "
+#~ "hinderpaal is bij voorvereisten (zie Debian bug #526774). Merk op dat dit "
+#~ "alle triggers verwerkt, niet enkel de triggers die nodig zijn om dit "
+#~ "pakket te configureren."
+
+#~ msgid ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+#~ msgstr ""
+#~ "OrderList::Score {\n"
+#~ "\tDelete 500;\n"
+#~ "\tEssential 200;\n"
+#~ "\tImmediate 10;\n"
+#~ "\tPreDepends 50;\n"
+#~ "};"
+
+#~ msgid ""
+#~ "Essential packages (and their dependencies) should be configured "
+#~ "immediately after unpacking. It is a good idea to do this quite early in "
+#~ "the upgrade process as these configure calls also currently require "
+#~ "<literal>DPkg::TriggersPending</literal> which will run quite a few "
+#~ "triggers (which may not be needed). Essentials get per default a high "
+#~ "score but the immediate flag is relatively low (a package which has a Pre-"
+#~ "Depends is rated higher). These option and the others in the same group "
+#~ "can be used to change the scoring. The following example shows the "
+#~ "settings with their default values. <placeholder type=\"literallayout\" "
+#~ "id=\"0\"/>"
+#~ msgstr ""
+#~ "Essentiële pakketten (en de pakketten waarvan zij afhankelijk zijn) "
+#~ "zouden onmiddellijk geconfigureerd moeten worden nadat ze uitgepakt zijn. "
+#~ "Het wordt aanbevolen om dit vrij vroeg in het opwaarderingsproces te doen "
+#~ "aangezien deze configure-aanroepen momenteel ook <literal>DPkg::"
+#~ "TriggersPending</literal> uitlokken, waardoor behoorlijk wat triggers "
+#~ "afgehandeld kunnen worden (wat misschien niet nodig is). Essentiële "
+#~ "pakketten krijgen per definitie een hoge score maar de vlag immediate "
+#~ "heeft een relatief lage score (een pakket met een voorvereiste krijgt een "
+#~ "hogere score). Deze optie en de andere uit dezelfde groep kunnen gebruikt "
+#~ "worden om de score aan te passen. Het volgende voorbeeld toont de "
+#~ "instellingen met hun standaardwaarden. <placeholder type=\"literallayout"
+#~ "\" id=\"0\"/>"
+
+#~ msgid "List fingerprints of trusted keys."
+#~ msgstr "De vingerafdrukken van de betrouwbare sleutels weergeven."
+
+#~ msgid "<filename>/etc/apt/trustdb.gpg</filename>"
+#~ msgstr "<filename>/etc/apt/trustdb.gpg</filename>"
+
+#~ msgid "Local trust database of archive keys."
+#~ msgstr "Lokale database van betrouwbare archiefsleutels."
+
+#~ msgid "&keyring-filename;"
+#~ msgstr "&keyring-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive trusted keys."
+#~ msgstr ""
+#~ "Sleutelbos met betrouwbare sleutels van het archief &keyring-distro;."
+
+#~ msgid "&keyring-removed-filename;"
+#~ msgstr "&keyring-removed-filename;"
+
+#~ msgid "Keyring of &keyring-distro; archive removed trusted keys."
+#~ msgstr ""
+#~ "Sleutelbos met uit het archief &keyring-distro; verwijderde betrouwbare "
+#~ "sleutels."
+
+#~ msgid ""
+#~ "In the future APT will refuse to work with unauthenticated repositories "
+#~ "by default until support for them is removed entirely. Users have the "
+#~ "option to opt-in to this behavior already by setting the configuration "
+#~ "option <option>Acquire::AllowInsecureRepositories</option> to "
+#~ "<literal>false</literal>."
+#~ msgstr ""
+#~ "In de toekomst zal APT standaard weigeren om met niet-geauthenticeerde "
+#~ "pakketbronnen te werken totdat die helemaal niet meer ondersteund zullen "
+#~ "worden. Gebruikers hebben de mogelijkheid om nu reeds voor dit gedrag te "
+#~ "kiezen door de configuratieoptie <option>Acquire::"
+#~ "AllowInsecureRepositories</option> in te stellen op <literal>false</"
+#~ "literal>."
+
+#~ msgid ""
+#~ "Allow the update operation to load data files from a repository without a "
+#~ "trusted signature. If enabled this option no data files will be loaded "
+#~ "and the update operation fails with a error for this source. The default "
+#~ "is false for backward compatibility. This will be changed in the future."
+#~ msgstr ""
+#~ "De bewerking update toelaten om databestanden op te halen van een "
+#~ "pakketbron zonder een betrouwbare ondertekening. Indien deze optie "
+#~ "geactiveerd is, zullen geen databestanden opgehaald worden en zal de "
+#~ "update-bewerking voor deze pakketbron mislukken met een foutmelding. "
+#~ "Omwille van achterwaartse compatibiliteit is de standaard false "
+#~ "(uitgezet). In de toekomst zal dit veranderen."
+
+#~ msgid "&apt-get;, &apt-conf;"
+#~ msgstr "&apt-get;, &apt-conf;"
+
#~ msgid ""
#~ "<command>apt</command> (Advanced Package Tool) is the command-line tool "
#~ "for handling packages. It provides a commandline interface for the "
projects / apt.git / blobdiff