msgstr ""
"Project-Id-Version: apt 0.7.25\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2012-05-24 15:57+0300\n"
+"POT-Creation-Date: 2012-05-29 15:35+0300\n"
"PO-Revision-Date: 2010-08-25 03:25+0200\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
#: apt-cdrom.8.xml:45
msgid ""
"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT "
-"system, it cannot be done by hand. Furthermore each disk in a multi-cd set "
+"system; it cannot be done by hand. Furthermore each disc in a multi-CD set "
"must be inserted and scanned separately to account for possible mis-burns."
msgstr ""
"Es necesario usar <command>apt-cdrom</command> para añadir los discos al "
#: apt-cdrom.8.xml:56
msgid ""
"<literal>add</literal> is used to add a new disc to the source list. It will "
-"unmount the CD-ROM device, prompt for a disk to be inserted and then proceed "
+"unmount the CD-ROM device, prompt for a disc to be inserted and then proceed "
"to scan it and copy the index files. If the disc does not have a proper "
-"<filename>disk</filename> directory you will be prompted for a descriptive "
+"<filename>.disk</filename> directory you will be prompted for a descriptive "
"title."
msgstr ""
"<literal>add</literal> añade un disco nuevo a la lista de fuentes. "
"Desmontará el dispositivo del disco y pedirá que se inserte un disco para "
"iniciar el análisis y copiado de los ficheros de índice. Si el disco no "
-"contiene un directorio <filename>disk</filename> apropiado, se le pedirá un "
+"contiene un directorio <filename>.disk</filename> apropiado, se le pedirá un "
"título descriptivo."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-cdrom.8.xml:85
msgid ""
-"Mount point; specify the location to mount the cdrom. This mount point must "
+"Mount point; specify the location to mount the CD-ROM. This mount point must "
"be listed in <filename>/etc/fstab</filename> and properly configured. "
"Configuration Item: <literal>Acquire::cdrom::mount</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-cdrom.8.xml:94
msgid ""
-"Rename a disc; change the label of a disk or override the disks given label. "
-"This option will cause <command>apt-cdrom</command> to prompt for a new "
-"label. Configuration Item: <literal>APT::CDROM::Rename</literal>."
+"Rename a disc; change the label of a disc or override the disc's given "
+"label. This option will cause <command>apt-cdrom</command> to prompt for a "
+"new label. Configuration Item: <literal>APT::CDROM::Rename</literal>."
msgstr ""
"Renombra un disco. Cambia la etiqueta de un disco o invalida la etiqueta del "
"disco. Esta opción hará que <command>apt-cdrom</command> solicite una "
"<command>apt-config</command> is an internal program used by various "
"portions of the APT suite to provide consistent configurability. It accesses "
"the main configuration file <filename>/etc/apt/apt.conf</filename> in a "
-"manner that is easy to use by scripted applications."
+"manner that is easy to use for scripted applications."
msgstr ""
"<command>apt-config</command> es un programa interno que usan varios "
"programas del conjunto de herramientas de APT para ofrecer un método de "
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-config.8.xml:51
+#, fuzzy
+#| msgid ""
+#| "shell is used to access the configuration information from a shell "
+#| "script. It is given pairs of arguments, the first being a shell variable "
+#| "and the second the configuration value to query. As output it lists a "
+#| "series of shell assignments commands for each present value. In a shell "
+#| "script it should be used like:"
msgid ""
"shell is used to access the configuration information from a shell script. "
"It is given pairs of arguments, the first being a shell variable and the "
-"second the configuration value to query. As output it lists a series of "
-"shell assignments commands for each present value. In a shell script it "
-"should be used like:"
+"second the configuration value to query. As output it lists shell assignment "
+"commands for each value present. In a shell script it should be used as "
+"follows:"
msgstr ""
"Se usa para acceder a la información de la configuración mediante un script. "
"Se proporcionan parejas de argumentos, el primero es una variable del "
#: apt-config.8.xml:96
msgid ""
"Defines the output of each config option. %t will be replaced with "
-"the name of the option, %f with the complete optionname and %v "
-"with the value of the option. Use uppercase letters and special characters "
-"in the value will be encoded to ensure that it can e.g. be savely used in a "
-"quoted-string as defined by RFC822. Additionally %n will be replaced "
-"by a newline, %N by a tab. A % can be printed by using %"
-"%."
+"its individual name, %f with its full hierarchical name and %v "
+"with its value. Use uppercase letters and special characters in the value "
+"will be encoded to ensure that it can e.g. be safely used in a quoted-string "
+"as defined by RFC822. Additionally %n will be replaced by a newline, "
+"and %N by a tab. A % can be printed by using %%."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
#. type: Content of: <refentry><refnamediv><refpurpose>
#: apt-extracttemplates.1.xml:33
-msgid "Utility to extract DebConf config and templates from Debian packages"
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
msgstr ""
-"Herramienta para extraer la configuración de DebConf y las plantillas de los "
-"paquetes de Debian"
+"Herramienta para extraer la configuración de <command>debconf</command> y "
+"las plantillas de los paquetes de Debian"
#. type: Content of: <refentry><refsect1><para>
#: apt-extracttemplates.1.xml:39
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-extracttemplates.1.xml:58
msgid ""
-"Temporary directory in which to write extracted debconf template files and "
-"config scripts. Configuration Item: <literal>APT::ExtractTemplates::"
-"TempDir</literal>"
+"Temporary directory in which to write extracted <command>debconf</command> "
+"template files and config scripts. Configuration Item: <literal>APT::"
+"ExtractTemplates::TempDir</literal>"
msgstr ""
"El directorio temporal en el que se escribirán los ficheros de plantillas "
-"debconf y los scripts de configuración extraídos. Opción de configuración: "
-"<literal>APT::ExtractTemplates::TempDir</literal>"
+"<command>debconf</command> y los scripts de configuración extraídos. Opción "
+"de configuración: <literal>APT::ExtractTemplates::TempDir</literal>"
#. type: Content of: <refentry><refsect1><para>
#: apt-extracttemplates.1.xml:75
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml:74
msgid ""
-"<literal>dselect-upgrade</literal> is used in conjunction with the "
-"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</"
-"literal> follows the changes made by &dselect; to the <literal>Status</"
-"literal> field of available packages, and performs the actions necessary to "
-"realize that state (for instance, the removal of old and the installation of "
-"new packages)."
-msgstr ""
-"<literal>dselect-upgrade</literal> se usa junto al tradicional administrador "
-"de paquetes de Debian, &dselect;. <literal>dselect-upgrade</literal> "
-"registra los cambios que haya hecho &dselect; al campo <literal>Status</"
-"literal> (estado) de los paquetes disponibles y realiza las acciones "
-"necesarias para que los cambios se lleven a cabo (por ejemplo, borrar "
-"paquetes antiguos e instalar las nuevas versiones)."
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:84
-msgid ""
"<literal>dist-upgrade</literal> in addition to performing the function of "
"<literal>upgrade</literal>, also intelligently handles changing dependencies "
"with new versions of packages; <command>apt-get</command> has a \"smart\" "
"conflict resolution system, and it will attempt to upgrade the most "
-"important packages at the expense of less important ones if necessary. So, "
-"<literal>dist-upgrade</literal> command may remove some packages. The "
+"important packages at the expense of less important ones if necessary. The <literal>dist-upgrade</literal> command may therefore remove some packages. "
+" The "
"<filename>/etc/apt/sources.list</filename> file contains a list of locations "
"from which to retrieve desired package files. See also &apt-preferences; "
"for a mechanism for overriding the general settings for individual packages."
"paquetes. También puede consultar &apt-preferences; si quiere invalidar este "
"comportamiento para paquetes individuales."
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml:87
+msgid ""
+"<literal>dselect-upgrade</literal> is used in conjunction with the "
+"traditional Debian packaging front-end, &dselect;. <literal>dselect-upgrade</"
+"literal> follows the changes made by &dselect; to the <literal>Status</"
+"literal> field of available packages, and performs the actions necessary to "
+"realize that state (for instance, the removal of old and the installation of "
+"new packages)."
+msgstr ""
+"<literal>dselect-upgrade</literal> se usa junto al tradicional administrador "
+"de paquetes de Debian, &dselect;. <literal>dselect-upgrade</literal> "
+"registra los cambios que haya hecho &dselect; al campo <literal>Status</"
+"literal> (estado) de los paquetes disponibles y realiza las acciones "
+"necesarias para que los cambios se lleven a cabo (por ejemplo, borrar "
+"paquetes antiguos e instalar las nuevas versiones)."
+
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml:98
msgid ""
"<em>Sources</em> which are places to fetch archives from. These can be "
"remote Internet sites, local Debian mirrors or CD-ROMs. Each source can "
"provide a fragment of the total Debian archive, APT will automatically "
-"combine them to form a complete set of packages. If you have a CD-ROM then it "
-"is a good idea to specify it first and then specify a mirror so that you "
+"combine them to form a complete set of packages. If you have a CD-ROM then "
+"it is a good idea to specify it first and then specify a mirror so that you "
"have access to the latest bug fixes. APT will automatically use packages on "
"your CD-ROM before downloading from the Internet."
msgstr ""
projects / apt.git / blobdiff