-#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:136
-msgid ""
-"<command>apt-mark</command> returns zero on normal operation, non-zero on "
-"error."
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt-secure.8.xml:17 apt-secure.8.xml:39
-msgid "apt-secure"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-secure.8.xml:40
-msgid "Archive authentication support for APT"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:45
-msgid ""
-"Starting with version 0.6, <command>apt</command> contains code that does "
-"signature checking of the Release file for all archives. This ensures that "
-"packages in the archive can't be modified by people who have no access to "
-"the Release file signing key."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:53
-msgid ""
-"If a package comes from a archive without a signature or with a signature "
-"that apt does not have a key for that package is considered untrusted and "
-"installing it will result in a big warning. <command>apt-get</command> will "
-"currently only warn for unsigned archives, future releases might force all "
-"sources to be verified before downloading packages from them."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:62
-msgid ""
-"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
-"authentication feature."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:67
-msgid "Trusted archives"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:70
-msgid ""
-"The chain of trust from an apt archive to the end user is made up of "
-"different steps. <command>apt-secure</command> is the last step in this "
-"chain, trusting an archive does not mean that the packages that you trust it "
-"do not contain malicious code but means that you trust the archive "
-"maintainer. It's the archive maintainer responsibility to ensure that the "
-"archive integrity is correct."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:78
-msgid ""
-"apt-secure does not review signatures at a package level. If you require "
-"tools to do this you should look at <command>debsig-verify</command> and "
-"<command>debsign</command> (provided in the debsig-verify and devscripts "
-"packages respectively)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:85
-msgid ""
-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. This upload in order to "
-"become effective needs to be signed by a key of a maintainer within the "
-"Debian maintainer's keyring (available in the debian-keyring package). "
-"Maintainer's keys are signed by other maintainers following pre-established "
-"procedures to ensure the identity of the key holder."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:95
-msgid ""
-"Once the uploaded package is verified and included in the archive, the "
-"maintainer signature is stripped off, an MD5 sum of the package is computed "
-"and put in the Packages file. The MD5 sum of all of the packages files are "
-"then computed and put into the Release file. The Release file is then signed "
-"by the archive key (which is created once a year) and distributed through "
-"the FTP server. This key is also on the Debian keyring."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:105
-msgid ""
-"Any end user can check the signature of the Release file, extract the MD5 "
-"sum of a package from it and compare it with the MD5 sum of the package he "
-"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian "
-"package was checked. Now both the MD5 sum and the signature of the Release "
-"file are checked."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:112
-msgid ""
-"Notice that this is distinct from checking signatures on a per package "
-"basis. It is designed to prevent two possible attacks:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:117
-msgid ""
-"<literal>Network \"man in the middle\" attacks</literal>. Without signature "
-"checking, a malicious agent can introduce himself in the package download "
-"process and provide malicious software either by controlling a network "
-"element (router, switch, etc.) or by redirecting traffic to a rogue server "
-"(through arp or DNS spoofing attacks)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:125
-msgid ""
-"<literal>Mirror network compromise</literal>. Without signature checking, a "
-"malicious agent can compromise a mirror host and modify the files in it to "
-"propagate malicious software to all users downloading packages from that "
-"host."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:132
-msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:138
-msgid "User configuration"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:140
-msgid ""
-"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys although an installation of "
-"this release will automatically provide the default Debian archive signing "
-"keys used in the Debian package repositories."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:147
-msgid ""
-"In order to add a new key you need to first download it (you should make "
-"sure you are using a trusted communication channel when retrieving it), add "
-"it with <command>apt-key</command> and then run <command>apt-get update</"
-"command> so that apt can download and verify the <filename>InRelease</"
-"filename> or <filename>Release.gpg</filename> files from the archives you "
-"have configured."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:156
-msgid "Archive configuration"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:158
-msgid ""
-"If you want to provide archive signatures in an archive under your "
-"maintenance you have to:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:163
-msgid ""
-"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist "
-"already. You can do this by running <command>apt-ftparchive release</"
-"command> (provided in apt-utils)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:168
-msgid ""
-"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg --"
-"clearsign -o InRelease Release</command> and <command>gpg -abs -o Release."
-"gpg Release</command>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:172
-msgid ""
-"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
-"know what key they need to import in order to authenticate the files in the "
-"archive."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:179
-msgid ""
-"Whenever the contents of the archive changes (new packages are added or "
-"removed) the archive maintainer has to follow the first two steps previously "
-"outlined."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:187
-msgid ""
-"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, "
-"&debsign; &debsig-verify;, &gpg;"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:191
-msgid ""
-"For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html"
-"\">Debian Security Infrastructure</ulink> chapter of the Securing Debian "
-"Manual (available also in the harden-doc package) and the <ulink url="
-"\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong "
-"Distribution HOWTO</ulink> by V. Alex Brennen."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:204
-msgid "Manpage Authors"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:206
-msgid ""
-"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac "
-"Jones, Colin Walters, Florian Weimer and Michael Vogt."
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt-sortpkgs.1.xml:25 apt-sortpkgs.1.xml:32
-msgid "apt-sortpkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-sortpkgs.1.xml:33
-msgid "Utility to sort package index files"
-msgstr ""
-
-#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
-#: apt-sortpkgs.1.xml:39
-msgid ""
-"<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> "
-"<arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-"<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg choice="
-"\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:48
-msgid ""
-"<command>apt-sortpkgs</command> will take an index file (Source index or "
-"Package index) and sort the records so that they are ordered by the package "
-"name. It will also sort the internal fields of each record according to the "
-"internal sorting rules."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:54
-msgid "All output is sent to stdout, the input must be a seekable file."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-sortpkgs.1.xml:61
-msgid "<option>--source</option>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-sortpkgs.1.xml:63
-msgid ""
-"Use Source index field ordering. Configuration Item: <literal>APT::"
-"SortPkgs::Source</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:77
-msgid ""
-"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
-"100 on error."
-msgstr ""
-
-#. The last update date
-#. type: Content of: <refentry><refentryinfo>
-#: apt.conf.5.xml:16
-msgid ""
-"&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</"
-"firstname> <surname>Burrows</surname> <contrib>Initial documentation of "
-"Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; "
-"&apt-product; <date>16 January 2010</date>"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt.conf.5.xml:31 apt.conf.5.xml:38
-msgid "apt.conf"
-msgstr ""
-
-#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt.conf.5.xml:32 apt_preferences.5.xml:25 sources.list.5.xml:26
-msgid "5"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt.conf.5.xml:39
-msgid "Configuration file for APT"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:43
-msgid ""
-"<filename>apt.conf</filename> is the main configuration file for the APT "
-"suite of tools, but by far not the only place changes to options can be "
-"made. All tools therefore share the configuration files and also use a "
-"common command line parser to provide a uniform environment."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:48
-msgid ""
-"When an APT tool starts up it will read the configuration files in the "
-"following order:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:50
-msgid ""
-"the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
-"any)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:52
-msgid ""
-"all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
-"order which have no or \"<literal>conf</literal>\" as filename extension and "
-"which only contain alphanumeric, hyphen (-), underscore (_) and period (.) "
-"characters. Otherwise APT will print a notice that it has ignored a file if "
-"the file doesn't match a pattern in the <literal>Dir::Ignore-Files-Silently</"
-"literal> configuration list - in this case it will be silently ignored."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:59
-msgid ""
-"the main configuration file specified by <literal>Dir::Etc::main</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:61
-msgid ""
-"the command line options are applied to override the configuration "
-"directives or to load even more configuration files."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:65
-msgid "Syntax"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:66
-msgid ""
-"The configuration file is organized in a tree with options organized into "
-"functional groups. Option specification is given with a double colon "
-"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option "
-"within the APT tool group, for the Get tool. Options do not inherit from "
-"their parent groups."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:72
-msgid ""
-"Syntactically the configuration language is modeled after what the ISC tools "
-"such as bind and dhcp use. Lines starting with <literal>//</literal> are "
-"treated as comments (ignored), as well as all text between <literal>/*</"
-"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is "
-"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing "
-"semicolon and the quotes are required. The value must be on one line, and "
-"there is no kind of string concatenation. It must not include inside "
-"quotes. The behavior of the backslash \"\\\" and escaped characters inside "
-"a value is undefined and it should not be used. An option name may include "
-"alphanumerical characters and the \"/-:._+\" characters. A new scope can be "
-"opened with curly braces, like:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:86
-#, no-wrap
-msgid ""
-"APT {\n"
-" Get {\n"
-" Assume-Yes \"true\";\n"
-" Fix-Broken \"true\";\n"
-" };\n"
-"};\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:94
-msgid ""
-"with newlines placed to make it more readable. Lists can be created by "
-"opening a scope and including a single string enclosed in quotes followed by "
-"a semicolon. Multiple entries can be included, each separated by a semicolon."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:99
-#, no-wrap
-msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:102
-msgid ""
-"In general the sample configuration file in <filename>&docdir;examples/apt."
-"conf</filename> &configureindex; is a good guide for how it should look."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:106
-msgid ""
-"The names of the configuration items are not case-sensitive. So in the "
-"previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:109
-msgid ""
-"Names for the configuration items are optional if a list is defined as it "
-"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. "
-"If you don't specify a name a new entry will simply add a new option to the "
-"list. If you specify a name you can override the option as every other "
-"option by reassigning a new value to the option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:114
-msgid ""
-"Two specials are allowed, <literal>#include</literal> (which is deprecated "
-"and not supported by alternative implementations) and <literal>#clear</"
-"literal>: <literal>#include</literal> will include the given file, unless "
-"the filename ends in a slash, then the whole directory is included. "
-"<literal>#clear</literal> is used to erase a part of the configuration tree. "
-"The specified element and all its descendants are erased. (Note that these "
-"lines also need to end with a semicolon.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:122
-msgid ""
-"The #clear command is the only way to delete a list or a complete scope. "
-"Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previously written entries. Only options can be "
-"overridden by addressing a new value to it - lists and scopes can't be "
-"overridden, only cleared."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:127
-msgid ""
-"All of the APT tools take a -o option which allows an arbitrary "
-"configuration directive to be specified on the command line. The syntax is a "
-"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
-"followed by an equals sign then the new value of the option. Lists can be "
-"appended too by adding a trailing :: to the list name. (As you might "
-"suspect: The scope syntax can't be used on the command line.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:134
-msgid ""
-"Note that you can use :: only for appending one item per line to a list and "
-"that you should not use it in combination with the scope syntax. (The scope "
-"syntax implicit insert ::) Using both syntaxes together will trigger a bug "
-"which some users unfortunately relay on: An option with the unusual name "
-"\"<literal>::</literal>\" which acts like every other option with a name. "
-"These introduces many problems including that a user who writes multiple "
-"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a "
-"list will gain the opposite as only the last assignment for this option "
-"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise "
-"errors and will stop working if they encounter this misuse, so please "
-"correct such statements now as long as APT doesn't complain explicit about "
-"them."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:146
-msgid "The APT Group"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:147
-msgid ""
-"This group of options controls general APT behavior as well as holding the "
-"options for all of the tools."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:151
-msgid "Architecture"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:152
-msgid ""
-"System Architecture; sets the architecture to use when fetching files and "
-"parsing package lists. The internal default is the architecture apt was "
-"compiled for."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:157
-msgid "Default-Release"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:158
-msgid ""
-"Default release to install packages from if more than one version available. "
-"Contains release name, codename or release version. Examples: 'stable', "
-"'testing', 'unstable', '&stable-codename;', '&testing-codename;', '4.0', "
-"'5.0*'. See also &apt-preferences;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:163
-msgid "Ignore-Hold"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:164
-msgid ""
-"Ignore Held packages; This global option causes the problem resolver to "
-"ignore held packages in its decision making."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:168
-msgid "Clean-Installed"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:169
-msgid ""
-"Defaults to on. When turned on the autoclean feature will remove any "
-"packages which can no longer be downloaded from the cache. If turned off "
-"then packages that are locally installed are also excluded from cleaning - "
-"but note that APT provides no direct means to reinstall them."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:175
-msgid "Immediate-Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:176
-msgid ""
-"Defaults to on which will cause APT to install essential and important "
-"packages as fast as possible in the install/upgrade operation. This is done "
-"to limit the effect of a failing &dpkg; call: If this option is disabled APT "
-"does treat an important package in the same way as an extra package: Between "
-"the unpacking of the important package A and his configuration can then be "
-"many other unpack or configuration calls, e.g. for package B which has no "
-"relation to A, but causes the dpkg call to fail (e.g. because maintainer "
-"script of package B generates an error) which results in a system state in "
-"which package A is unpacked but unconfigured - each package depending on A "
-"is now no longer guaranteed to work as their dependency on A is not longer "
-"satisfied. The immediate configuration marker is also applied to all "
-"dependencies which can generate a problem if the dependencies e.g. form a "
-"circle as a dependency with the immediate flag is comparable with a Pre-"
-"Dependency. So in theory it is possible that APT encounters a situation in "
-"which it is unable to perform immediate configuration, errors out and refers "
-"to this option so the user can deactivate the immediate configuration "
-"temporarily to be able to perform an install/upgrade again. Note the use of "
-"the word \"theory\" here as this problem was only encountered by now in real "
-"world a few times in non-stable distribution versions and was caused by "
-"wrong dependencies of the package in question or by a system in an already "
-"broken state, so you should not blindly disable this option as the mentioned "
-"scenario above is not the only problem immediate configuration can help to "
-"prevent in the first place. Before a big operation like <literal>dist-"
-"upgrade</literal> is run with this option disabled it should be tried to "
-"explicitly <literal>install</literal> the package APT is unable to configure "
-"immediately, but please make sure to report your problem also to your "
-"distribution and to the APT team with the buglink below so they can work on "
-"improving or correcting the upgrade process."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:198
-msgid "Force-LoopBreak"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:199
-msgid ""
-"Never Enable this option unless you -really- know what you are doing. It "
-"permits APT to temporarily remove an essential package to break a Conflicts/"
-"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH "
-"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the "
-"essential packages are not tar, gzip, libc, dpkg, bash or anything that "
-"those packages depend on."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:207
-msgid "Cache-Start, Cache-Grow and Cache-Limit"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:208
-msgid ""
-"APT uses since version 0.7.26 a resizable memory mapped cache file to store "
-"the 'available' information. <literal>Cache-Start</literal> acts as a hint "
-"to which size the Cache will grow and is therefore the amount of memory APT "
-"will request at startup. The default value is 20971520 bytes (~20 MB). Note "
-"that these amount of space need to be available for APT otherwise it will "
-"likely fail ungracefully, so for memory restricted devices these value "
-"should be lowered while on systems with a lot of configured sources this "
-"might be increased. <literal>Cache-Grow</literal> defines in byte with the "
-"default of 1048576 (~1 MB) how much the Cache size will be increased in the "
-"event the space defined by <literal>Cache-Start</literal> is not enough. "
-"These value will be applied again and again until either the cache is big "
-"enough to store all information or the size of the cache reaches the "
-"<literal>Cache-Limit</literal>. The default of <literal>Cache-Limit</"
-"literal> is 0 which stands for no limit. If <literal>Cache-Grow</literal> "
-"is set to 0 the automatic grow of the cache is disabled."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:223
-msgid "Build-Essential"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:224
-msgid "Defines which package(s) are considered essential build dependencies."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:227
-msgid "Get"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:228
-msgid ""
-"The Get subsection controls the &apt-get; tool, please see its documentation "
-"for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:232
-msgid "Cache"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:233
-msgid ""
-"The Cache subsection controls the &apt-cache; tool, please see its "
-"documentation for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:237
-msgid "CDROM"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:238
-msgid ""
-"The CDROM subsection controls the &apt-cdrom; tool, please see its "
-"documentation for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:244
-msgid "The Acquire Group"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:249
-msgid "Check-Valid-Until"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:250
-msgid ""
-"Security related option defaulting to true as an expiring validation for a "
-"Release file prevents longtime replay attacks and can e.g. also help users "
-"to identify no longer updated mirrors - but the feature depends on the "
-"correctness of the time on the user system. Archive maintainers are "
-"encouraged to create Release files with the <literal>Valid-Until</literal> "
-"header, but if they don't or a stricter value is volitional the following "
-"<literal>Max-ValidTime</literal> option can be used."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:260
-msgid "Max-ValidTime"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:261
-msgid ""
-"Seconds the Release file should be considered valid after it was created. "
-"The default is \"for ever\" (0) if the Release file of the archive doesn't "
-"include a <literal>Valid-Until</literal> header. If it does then this date "
-"is the default. The date from the Release file or the date specified by the "
-"creation time of the Release file (<literal>Date</literal> header) plus the "
-"seconds specified with this options are used to check if the validation of a "
-"file has expired by using the earlier date of the two. Archive specific "
-"settings can be made by appending the label of the archive to the option "
-"name."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:273
-msgid "PDiffs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:274
-msgid ""
-"Try to download deltas called <literal>PDiffs</literal> for Packages or "
-"Sources files instead of downloading whole ones. True by default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:277
-msgid ""
-"Two sub-options to limit the use of PDiffs are also available: With "
-"<literal>FileLimit</literal> can be specified how many PDiff files are "
-"downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
-"other hand is the maximum precentage of the size of all patches compared to "
-"the size of the targeted file. If one of these limits is exceeded the "
-"complete file is downloaded instead of the patches."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:286
-msgid "Queue-Mode"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:287
-msgid ""
-"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
-"literal> or <literal>access</literal> which determines how APT parallelizes "
-"outgoing connections. <literal>host</literal> means that one connection per "
-"target host will be opened, <literal>access</literal> means that one "
-"connection per URI type will be opened."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:294
-msgid "Retries"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:295
-msgid ""
-"Number of retries to perform. If this is non-zero APT will retry failed "
-"files the given number of times."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:299
-msgid "Source-Symlinks"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:300
-msgid ""
-"Use symlinks for source archives. If set to true then source archives will "
-"be symlinked when possible instead of copying. True is the default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:304 sources.list.5.xml:144
-msgid "http"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:305
-msgid ""
-"HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
-"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per "
-"host proxies can also be specified by using the form <literal>http::Proxy::"
-"<host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>http_proxy</envar> environment variable will be used."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:313
-msgid ""
-"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
-"caches. <literal>No-Cache</literal> tells the proxy to not use its cached "
-"response under any circumstances, <literal>Max-Age</literal> is sent only "
-"for index files and tells the cache to refresh its object if it is older "
-"than the given number of seconds. Debian updates its index files daily so "
-"the default is 1 day. <literal>No-Store</literal> specifies that the cache "
-"should never store this request, it is only set for archive files. This may "
-"be useful to prevent polluting a proxy cache with very large .deb files. "
-"Note: Squid 2.0.2 does not support any of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:323 apt.conf.5.xml:387
-msgid ""
-"The option <literal>timeout</literal> sets the timeout timer used by the "
-"method, this applies to all things including connection timeout and data "
-"timeout."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:326
-msgid ""
-"One setting is provided to control the pipeline depth in cases where the "
-"remote server is not RFC conforming or buggy (such as Squid 2.0.2). "
-"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 "
-"indicating how many outstanding requests APT should send. A value of zero "
-"MUST be specified if the remote host does not properly linger on TCP "
-"connections - otherwise data corruption will occur. Hosts which require this "
-"are in violation of RFC 2068."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:334
-msgid ""
-"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
-"literal> which accepts integer values in kilobyte. The default value is 0 "
-"which deactivates the limit and tries uses as much as possible of the "
-"bandwidth (Note that this option implicit deactivates the download from "
-"multiple servers at the same time.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:339
-msgid ""
-"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
-"User-Agent for the http download method as some proxies allow access for "
-"clients only if the client uses a known identifier."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:345
-msgid "https"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:346
-msgid ""
-"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
-"options are the same as for <literal>http</literal> method and will also "
-"default to the options from the <literal>http</literal> method if they are "
-"not explicitly set for https. <literal>Pipeline-Depth</literal> option is "
-"not supported yet."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:352
-msgid ""
-"<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates. <literal><host>::CaInfo</literal> is "
-"corresponding per-host option. <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not. <literal><host>::Verify-Peer</literal> "
-"is corresponding per-host option. <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not. <literal><"
-"host>::Verify-Host</literal> is corresponding per-host option. "
-"<literal>SslCert</literal> determines what certificate to use for client "
-"authentication. <literal><host>::SslCert</literal> is corresponding "
-"per-host option. <literal>SslKey</literal> determines what private key to "
-"use for client authentication. <literal><host>::SslKey</literal> is "
-"corresponding per-host option. <literal>SslForceVersion</literal> overrides "
-"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. "
-"<literal><host>::SslForceVersion</literal> is corresponding per-host "
-"option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:370 sources.list.5.xml:155
-msgid "ftp"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:371
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form <literal>ftp::Proxy::<"
-"host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp "
-"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in "
-"the configuration file. This entry specifies the commands to send to tell "
-"the proxy server what to connect to. Please see &configureindex; for an "
-"example of how to do this. The substitution variables available are <literal>"
-"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>"
-"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</"
-"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's "
-"respective URI component."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:390
-msgid ""
-"Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment. However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:397
-msgid ""
-"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
-"envar> environment variable to a http url - see the discussion of the http "
-"method above for syntax. You cannot set this in the configuration file and "
-"it is not recommended to use FTP over HTTP due to its low efficiency."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:402
-msgid ""
-"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
-"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
-"false, which means these commands are only used if the control connection is "
-"IPv6. Setting this to true forces their use even on IPv4 connections. Note "
-"that most FTP servers do not support RFC2428."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:409 sources.list.5.xml:137
-msgid "cdrom"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:415
-#, no-wrap
-msgid "/cdrom/::Mount \"foo\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:410
-msgid ""
-"CDROM URIs; the only setting for CDROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
-"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:420
-msgid "gpgv"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:421
-msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:426
-msgid "CompressionTypes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:432
-#, no-wrap
-msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:427
-msgid ""
-"List of compression types which are understood by the acquire methods. "
-"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:437
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order:: \"gz\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:440
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:433
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
-"order the acquire system will try to download the compressed files. The "
-"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:444
-#, no-wrap
-msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:442
-msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the command line will be added at the end of "
-"the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in the "
-"configuration files you can set the option direct - not in list style. This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:449
-msgid ""
-"The special type <literal>uncompressed</literal> can be used to give "
-"uncompressed files a preference, but note that most archives doesn't provide "
-"uncompressed files so this is mostly only useable for local mirrors."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:454
-msgid "GzipIndexes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:456
-msgid ""
-"When downloading <literal>gzip</literal> compressed indexes (Packages, "
-"Sources, or Translations), keep them gzip compressed locally instead of "
-"unpacking them. This saves quite a lot of disk space at the expense of more "
-"CPU requirements when building the local package caches. False by default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:463
-msgid "Languages"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:464
-msgid ""
-"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:480
-#, no-wrap
-msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:470
-msgid ""
-"The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
-"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
-"that these codes are not included twice in the list. If "
-"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
-"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
-"Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file. This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id="
-"\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:245
-msgid ""
-"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:487
-msgid "Directories"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:489
-msgid ""
-"The <literal>Dir::State</literal> section has directories that pertain to "
-"local state information. <literal>lists</literal> is the directory to place "
-"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
-"preferences file. <literal>Dir::State</literal> contains the default "
-"directory to prefix on all sub items if they do not start with <filename>/</"
-"filename> or <filename>./</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:496
-msgid ""
-"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
-"information, such as the two package caches <literal>srcpkgcache</literal> "
-"and <literal>pkgcache</literal> as well as the location to place downloaded "
-"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
-"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
-"default directory is contained in <literal>Dir::Cache</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:505
-msgid ""
-"<literal>Dir::Etc</literal> contains the location of configuration files, "
-"<literal>sourcelist</literal> gives the location of the sourcelist and "
-"<literal>main</literal> is the default configuration file (setting has no "
-"effect, unless it is done from the config file specified by "
-"<envar>APT_CONFIG</envar>)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:511
-msgid ""
-"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
-"in lexical order from the directory specified. After this is done then the "
-"main config file is loaded."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:515
-msgid ""
-"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
-"Bin::Methods</literal> specifies the location of the method handlers and "
-"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, "
-"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</"
-"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</"
-"literal> specify the location of the respective programs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:523
-msgid ""
-"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</"
-"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the "
-"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</"
-"filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:536
-msgid ""
-"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
-"which files APT should silently ignore while parsing the files in the "
-"fragment directories. Per default a file which end with <literal>.disabled</"
-"literal>, <literal>~</literal>, <literal>.bak</literal> or <literal>.dpkg-[a-"
-"z]+</literal> is silently ignored. As seen in the last default value these "
-"patterns can use regular expression syntax."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:545
-#, fuzzy
-msgid "APT in DSelect"
-msgstr "DSelect"
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:547
-msgid ""
-"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
-"section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:551
-msgid "Clean"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:552
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:561
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:565
-msgid "Updateoptions"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:566
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:570
-msgid "PromptAfterUpdate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:571
-msgid ""
-"If true the [U]pdate operation in &dselect; will always prompt to continue. "
-"The default is to prompt only on error."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:577
-msgid "How APT calls dpkg"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:578
-msgid ""
-"Several configuration directives control how APT invokes &dpkg;. These are "
-"in the <literal>DPkg</literal> section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:583
-msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
-"using the list notation and each list item is passed as a single argument to "
-"&dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:588
-msgid "Pre-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:588
-msgid "Post-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:589
-msgid ""
-"This is a list of shell commands to run before/after invoking &dpkg;. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:595
-msgid "Pre-Install-Pkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:596
-msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:602
-msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::"
-"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command "
-"given to <literal>Pre-Install-Pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:609
-msgid "Run-Directory"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:610
-msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is <filename>/"
-"</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:614
-msgid "Build-options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:615
-msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
-"default is to disable signing and produce all binaries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:620
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:621
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiple calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing. <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:636
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:630
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:642
-msgid "DPkg::NoTriggers"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:643
-msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call. Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:650
-msgid "PackageManager::Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:651
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit. The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next option. "
-"\"<literal>no</literal>\" on the other hand will not configure anything and "
-"totally rely on dpkg for configuration (which will at the moment fail if a "
-"Pre-Depends is encountered). Setting this option to another than the all "
-"value will implicitly activate also the next option per default as otherwise "
-"the system could end in an unconfigured status which could be unbootable!"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:661
-msgid "DPkg::ConfigurePending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:662
-msgid ""
-"If this option is set apt will call <command>dpkg --configure --pending</"
-"command> to let dpkg handle all required configurations and triggers. This "
-"option is activated automatic per default if the previous option is not set "
-"to <literal>all</literal>, but deactivating could be useful if you want to "
-"run APT multiple times in a row - e.g. in an installer. In these sceneries "
-"you could deactivate this option in all but the last run."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:668
-msgid "DPkg::TriggersPending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:669
-msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:674
-msgid "PackageManager::UnpackAll"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:675
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by Pre-"
-"Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:682
-msgid "OrderList::Score::Immediate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:690
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:683
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated). These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"default values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:703
-msgid "Periodic and Archives options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:704
-msgid ""
-"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:712
-msgid "Debug options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:714
-msgid ""
-"Enabling options in the <literal>Debug::</literal> section will cause "
-"debugging information to be sent to the standard error stream of the program "
-"utilizing the <literal>apt</literal> libraries, or enable special program "
-"modes that are primarily useful for debugging the behavior of <literal>apt</"
-"literal>. Most of these options are not interesting to a normal user, but a "
-"few may be:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:725
-msgid ""
-"<literal>Debug::pkgProblemResolver</literal> enables output about the "
-"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
-"literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:733
-msgid ""
-"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
-"used to run some operations (for instance, <literal>apt-get -s install</"
-"literal>) as a non-root user."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:742
-msgid ""
-"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
-"time that <literal>apt</literal> invokes &dpkg;."
-msgstr ""
-
-#. TODO: provide a
-#. motivating example, except I haven't a clue why you'd want
-#. to do this.
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:750
-msgid ""
-"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
-"in CDROM IDs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:760
-msgid "A full list of debugging options to apt follows."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:765
-msgid "<literal>Debug::Acquire::cdrom</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:769
-msgid ""
-"Print information related to accessing <literal>cdrom://</literal> sources."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:776
-msgid "<literal>Debug::Acquire::ftp</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:780
-msgid "Print information related to downloading packages using FTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:787
-msgid "<literal>Debug::Acquire::http</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:791
-msgid "Print information related to downloading packages using HTTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:798
-msgid "<literal>Debug::Acquire::https</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:802
-msgid "Print information related to downloading packages using HTTPS."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:809
-msgid "<literal>Debug::Acquire::gpgv</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:813
-msgid ""
-"Print information related to verifying cryptographic signatures using "
-"<literal>gpg</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:820
-msgid "<literal>Debug::aptcdrom</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:824
-msgid ""
-"Output information about the process of accessing collections of packages "
-"stored on CD-ROMs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:831
-msgid "<literal>Debug::BuildDeps</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:834
-msgid "Describes the process of resolving build-dependencies in &apt-get;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:841
-msgid "<literal>Debug::Hashes</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:844
-msgid ""
-"Output each cryptographic hash that is generated by the <literal>apt</"
-"literal> libraries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:851
-msgid "<literal>Debug::IdentCDROM</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:854
-msgid ""
-"Do not include information from <literal>statfs</literal>, namely the number "
-"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
-"a CD-ROM."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:862
-msgid "<literal>Debug::NoLocking</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:865
-msgid ""
-"Disable all file locking. For instance, this will allow two instances of "
-"<quote><literal>apt-get update</literal></quote> to run at the same time."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:873
-msgid "<literal>Debug::pkgAcquire</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:877
-msgid "Log when items are added to or removed from the global download queue."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:884
-msgid "<literal>Debug::pkgAcquire::Auth</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:887
-msgid ""
-"Output status messages and errors related to verifying checksums and "
-"cryptographic signatures of downloaded files."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:894
-msgid "<literal>Debug::pkgAcquire::Diffs</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:897
-msgid ""
-"Output information about downloading and applying package index list diffs, "
-"and errors relating to package index list diffs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:905
-msgid "<literal>Debug::pkgAcquire::RRed</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:909
-msgid ""
-"Output information related to patching apt package lists when downloading "
-"index diffs instead of full indices."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:916
-msgid "<literal>Debug::pkgAcquire::Worker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:920
-msgid ""
-"Log all interactions with the sub-processes that actually perform downloads."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:927
-msgid "<literal>Debug::pkgAutoRemove</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:931
-msgid ""
-"Log events related to the automatically-installed status of packages and to "
-"the removal of unused packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:938
-msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:941
-msgid ""
-"Generate debug messages describing which packages are being automatically "
-"installed to resolve dependencies. This corresponds to the initial auto-"
-"install pass performed in, e.g., <literal>apt-get install</literal>, and not "
-"to the full <literal>apt</literal> dependency resolver; see <literal>Debug::"
-"pkgProblemResolver</literal> for that."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:952
-msgid "<literal>Debug::pkgDepCache::Marker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:955
-msgid ""
-"Generate debug messages describing which package is marked as keep/install/"
-"remove while the ProblemResolver does his work. Each addition or deletion "
-"may trigger additional actions; they are shown indented two additional space "
-"under the original entry. The format for each line is <literal>MarkKeep</"
-"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> "
-"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)"
-"</literal> where <literal>a.b.c</literal> is the current version of the "
-"package, <literal>d.e.f</literal> is the version considered for installation "
-"and <literal>x.y.z</literal> is a newer version, but not considered for "
-"installation (because of a low pin score). The later two can be omitted if "
-"there is none or if it is the same version as the installed. "
-"<literal>section</literal> is the name of the section the package appears in."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:974
-msgid "<literal>Debug::pkgInitConfig</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:977
-msgid "Dump the default configuration to standard error on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:984
-msgid "<literal>Debug::pkgDPkgPM</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:987
-msgid ""
-"When invoking &dpkg;, output the precise command line with which it is being "
-"invoked, with arguments separated by a single space character."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:995
-msgid "<literal>Debug::pkgDPkgProgressReporting</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:998
-msgid ""
-"Output all the data received from &dpkg; on the status file descriptor and "
-"any errors encountered while parsing it."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1005
-msgid "<literal>Debug::pkgOrderList</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1009
-msgid ""
-"Generate a trace of the algorithm that decides the order in which "
-"<literal>apt</literal> should pass packages to &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1017
-msgid "<literal>Debug::pkgPackageManager</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1021
-msgid ""
-"Output status messages tracing the steps performed when invoking &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1028
-msgid "<literal>Debug::pkgPolicy</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1032
-msgid "Output the priority of each package list on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1038
-msgid "<literal>Debug::pkgProblemResolver</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1042
-msgid ""
-"Trace the execution of the dependency resolver (this applies only to what "
-"happens when a complex dependency problem is encountered)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1050
-msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>"
-msgstr ""