EXIT_CODE=0
+while [ -n "$1" ]; do
+ if [ "$1" = "-q" ]; then
+ export MSGLEVEL=2
+ elif [ "$1" = "-v" ]; then
+ export MSGLEVEL=4
+ elif [ "$1" = '--color=no' ]; then
+ export MSGCOLOR='NO'
+ elif [ "$1" = '--color=yes' ]; then
+ export MSGCOLOR='YES'
+ elif [ "$1" = '--color' ]; then
+ export MSGCOLOR="$(echo "$2" | tr 'a-z' 'A-Z')"
+ shift
+ elif [ "$1" = '--level' ]; then
+ export MSGLEVEL=$2
+ shift
+ else
+ echo >&2 "WARNING: Unknown parameter »$1« will be ignored"
+ fi
+ shift
+done
+export MSGLEVEL="${MSGLEVEL:-3}"
+
# we all like colorful messages
-if [ "$MSGCOLOR" != 'NO' ]; then
+if [ "${MSGCOLOR:-YES}" = 'YES' ]; then
if [ ! -t 1 ]; then # but check that we output to a terminal
export MSGCOLOR='NO'
fi
msgndebug() { msgprintf "${CDEBUG}D: %s" '%s' "${CNORMAL}" "$@"; }
msgtest() { msgprintf "${CINFO}%s" "${CCMD}%s${CINFO}" "…${CNORMAL} " "$@"; }
msgpass() { printf "${CPASS}PASS${CNORMAL}\n"; }
+msgreportheader() {
+ if [ -n "$MSGTEST_MSG" ]; then
+ test "$1" != 'msgfailoutput' || echo
+ if [ -n "$MSGTEST_MSGMSG" ]; then
+ echo "$MSGTEST_MSGMSG"
+ fi
+ if [ -n "$MSGTEST_GRP" ] && [ "$MSGTEST_GRP" != 'NEXT' ] && [ "$MSGTEST_GRP" != "$MSGTEST_MSG" ]; then
+ echo "${CFAIL}Part of the test group: $MSGTEST_GRP"
+ fi
+ echo -n "$MSGTEST_MSG"
+ unset MSGTEST_MSG
+ fi
+}
msgskip() {
+ msgreportheader 'msgskip'
if [ $# -gt 0 ]; then printf "${CWARNING}SKIP: $*${CNORMAL}\n" >&2;
else printf "${CWARNING}SKIP${CNORMAL}\n" >&2; fi
}
msgfail() {
- if [ $# -gt 0 ]; then printf "${CFAIL}FAIL: $*${CNORMAL}\n" >&2;
+ msgreportheader 'msgfail'
+ if [ $# -gt 0 ] && [ -n "$1" ]; then printf "${CFAIL}FAIL: $*${CNORMAL}\n" >&2;
else printf "${CFAIL}FAIL${CNORMAL}\n" >&2; fi
if [ -n "$APT_DEBUG_TESTS" ]; then
$SHELL
fi
EXIT_CODE=$((EXIT_CODE+1));
}
+MSGGROUP_LEVEL=0
+msggroup() {
+ if [ -n "$1" ]; then
+ if [ $MSGGROUP_LEVEL = 0 ]; then
+ MSGTEST_GRP='NEXT'
+ fi
+ MSGGROUP_LEVEL=$((MSGGROUP_LEVEL+1));
+ else
+ MSGGROUP_LEVEL=$((MSGGROUP_LEVEL-1));
+ if [ $MSGGROUP_LEVEL = 0 ]; then
+ unset MSGTEST_GRP
+ fi
+ fi
+}
# enable / disable Debugging
-MSGLEVEL=${MSGLEVEL:-3}
if [ $MSGLEVEL -le 0 ]; then
msgdie() { true; }
fi
msgnwarn() { true; }
fi
if [ $MSGLEVEL -le 2 ]; then
- msgmsg() { true; }
+ msgmsg() {
+ MSGTEST_MSGMSG="$(msgprintf "${CMSG}%s" '%s' "${CNORMAL}" "$@")"
+ }
msgnmsg() { true; }
- msgtest() { true; }
+ msgtest() {
+ MSGTEST_MSG="$(msgprintf "${CINFO}%s" "${CCMD}%s${CINFO}" "…${CNORMAL} " "$@")"
+ if [ "$MSGTEST_GRP" = 'NEXT' ]; then
+ MSGTEST_GRP="$MSGTEST_MSG"
+ fi
+ }
msgpass() { printf " ${CPASS}P${CNORMAL}"; }
fi
if [ $MSGLEVEL -le 3 ]; then
}
getaptconfig() {
if [ -f ./aptconfig.conf ]; then
- echo "./aptconfig.conf"
+ echo "$(readlink -f ./aptconfig.conf)"
elif [ -f ../aptconfig.conf ]; then
- echo "../aptconfig.conf"
- fi
+ echo "$(readlink -f ../aptconfig.conf)"
+ elif [ -f ../../aptconfig.conf ]; then
+ echo "$(readlink -f ../../aptconfig.conf)"
+ elif [ -f "${TMPWORKINGDIRECTORY}/aptconfig.conf" ]; then
+ echo "$(readlink -f "${TMPWORKINGDIRECTORY}/aptconfig.conf")"
+ fi
}
runapt() {
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
aptdumpsolver() { runapt "${APTDUMPSOLVER}" "$@"; }
dpkg() {
- command dpkg --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log "$@"
+ "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "$@"
}
dpkgcheckbuilddeps() {
- command dpkg-checkbuilddeps --admindir=${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg "$@"
+ command dpkg-checkbuilddeps --admindir="${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg" "$@"
}
gdb() {
- local CMD="$1"
+ local CMD
+ case "$1" in
+ aptget) CMD="apt-get";;
+ aptcache) CMD="apt-cache";;
+ aptcdrom) CMD="apt-cdrom";;
+ aptconfig) CMD="apt-config";;
+ aptmark) CMD="apt-mark";;
+ apthelper) CMD="apt-helper";;
+ aptftparchive) CMD="apt-ftparchive";;
+ dpkg) shift; runapt "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg" "$@"; return;;
+ *) CMD="$1";;
+ esac
shift
- runapt command gdb --quiet -ex run "${BUILDDIRECTORY}/$CMD" --args "${BUILDDIRECTORY}/$CMD" "$@"
+ if [ "${CMD##*/}" = "$CMD" ]; then
+ CMD="${BUILDDIRECTORY}/${CMD}"
+ fi
+ runapt command gdb --quiet -ex run "$CMD" --args "$CMD" "$@"
}
exitwithstatus() {
if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$(stat --format '%a' "$TMPDIR")" != '1777' ]; then
unset TMPDIR
fi
- TMPWORKINGDIRECTORY=$(mktemp -d)
- addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY;"
- msgninfo "Preparing environment for ${CCMD}$(basename $0)${CINFO} in ${TMPWORKINGDIRECTORY}… "
+ TMPWORKINGDIRECTORY="$(mktemp -d)"
+ addtrap "cd /; rm -rf \"$TMPWORKINGDIRECTORY\";"
+ msgninfo "Preparing environment for ${0##*/} in ${TMPWORKINGDIRECTORY}…"
mkdir -m 700 "${TMPWORKINGDIRECTORY}/downloaded"
if [ "$(id -u)" = '0' ]; then
chown _apt:root "${TMPWORKINGDIRECTORY}/downloaded"
fi
- TESTDIRECTORY=$(readlink -f $(dirname $0))
+ TESTDIRECTORY="$(readlink -f "$(dirname $0)")"
# allow overriding the default BUILDDIR location
- BUILDDIRECTORY=${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}
- LIBRARYPATH=${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}
- METHODSDIR=${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}
- APTHELPERBINDIR=${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}
- APTWEBSERVERBINDIR=${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}
- APTINTERNALSOLVER=${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/apt-internal-solver"}
- APTDUMPSOLVER=${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/apt-dump-solver"}
+ SOURCEDIRECTORY="${APT_INTEGRATION_TESTS_SOURCE_DIR:-"${TESTDIRECTORY}/../../"}"
+ BUILDDIRECTORY="${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}"
+ LIBRARYPATH="${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}"
+ METHODSDIR="${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}"
+ APTHELPERBINDIR="${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}"
+ APTWEBSERVERBINDIR="${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}"
+ APTINTERNALSOLVER="${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/apt-internal-solver"}"
+ APTDUMPSOLVER="${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/apt-dump-solver"}"
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
- cd $TMPWORKINGDIRECTORY
+ cd "$TMPWORKINGDIRECTORY"
mkdir rootdir aptarchive keys
cd rootdir
mkdir -p etc/apt/apt.conf.d etc/apt/sources.list.d etc/apt/trusted.gpg.d etc/apt/preferences.d
mkdir -p var/lib/dpkg/info var/lib/dpkg/updates var/lib/dpkg/triggers
touch var/lib/dpkg/available
mkdir -p usr/lib/apt
- ln -s ${METHODSDIR} usr/lib/apt/methods
+ ln -s "${METHODSDIR}" usr/lib/apt/methods
if [ "$BUILDDIRECTORY" = "$LIBRARYPATH" ]; then
mkdir -p usr/lib/apt/solvers
ln -s "${BUILDDIRECTORY}/apt-dump-solver" usr/lib/apt/solvers/dump
fi
# use the autoremove from the BUILDDIRECTORY if its there, otherwise
# system
- if [ -e ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove ]; then
- ln -s ${BUILDDIRECTORY}/../../debian/apt.conf.autoremove etc/apt/apt.conf.d/01autoremove
+ if [ -e "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" ]; then
+ ln -s "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" etc/apt/apt.conf.d/01autoremove
else
ln -s /etc/apt/apt.conf.d/01autoremove etc/apt/apt.conf.d/01autoremove
fi
cd ..
- local PACKAGESFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Packages-/' -e 's/^skip-/Packages-/')
+ local BASENAME="${0##*/}"
+ local PACKAGESFILE="Packages-${BASENAME#*-}"
if [ -f "${TESTDIRECTORY}/${PACKAGESFILE}" ]; then
cp "${TESTDIRECTORY}/${PACKAGESFILE}" aptarchive/Packages
fi
- local SOURCESSFILE=$(echo "$(basename $0)" | sed -e 's/^test-/Sources-/' -e 's/^skip-/Sources-/')
+ local SOURCESSFILE="Sources-${BASENAME#*-}"
if [ -f "${TESTDIRECTORY}/${SOURCESSFILE}" ]; then
cp "${TESTDIRECTORY}/${SOURCESSFILE}" aptarchive/Sources
fi
- cp $(find $TESTDIRECTORY -name '*.pub' -o -name '*.sec') keys/
- chmod 644 $(find keys -name '*.pub' -o -name '*.sec')
- ln -s ${TMPWORKINGDIRECTORY}/keys/joesixpack.pub rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
+ for key in $(find "$TESTDIRECTORY" -name '*.pub' -o -name '*.sec'); do
+ cp "$key" keys/
+ chmod 644 "$key"
+ done
+ ln -s "${TMPWORKINGDIRECTORY}/keys/joesixpack.pub" rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" > aptconfig.conf
echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
- echo "Dir::Bin::Methods \"${METHODSDIR}\";" >> aptconfig.conf
+ echo "Dir::Bin::Methods \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/methods\";" >> aptconfig.conf
# store apt-key were we can access it, even if we run it as a different user
# destroys coverage reporting though, so just do it for root for now
if [ "$(id -u)" = '0' ]; then
else
echo "Dir::Bin::apt-key \"${BUILDDIRECTORY}/apt-key\";" >> aptconfig.conf
fi
- echo "Dir::Bin::dpkg \"fakeroot\";" >> aptconfig.conf
- echo "DPKG::options:: \"dpkg\";" >> aptconfig.conf
- echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
- echo "DPKG::options:: \"--force-not-root\";" >> aptconfig.conf
- echo "DPKG::options:: \"--force-bad-path\";" >> aptconfig.conf
- if ! command dpkg --assert-multi-arch >/dev/null 2>&1; then
- echo "DPKG::options:: \"--force-architecture\";" >> aptconfig.conf # Added to test multiarch before dpkg is ready for it…
- fi
- echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
- echo 'quiet::NoUpdate "true";' >> aptconfig.conf
- echo 'quiet::NoStatistic "true";' >> aptconfig.conf
- # too distracting for users, but helpful to detect changes
- echo 'Acquire::Progress::Ignore::ShowErrorText "true";' >> aptconfig.conf
- # in testcases, it can appear as if localhost has a rotation setup,
- # hide this as we can't really deal with it properly
- echo 'Acquire::Failure::ShowIP "false";' >> aptconfig.conf
+
+ cat > "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" <<EOF
+#!/bin/sh
+set -e
+if [ -r "${TMPWORKINGDIRECTORY}/noopchroot.so" ]; then
+ if [ -n "\$LD_LIBRARY_PATH" ]; then
+ export LD_LIBRARY_PATH="${TMPWORKINGDIRECTORY}:${LD_LIBRARY_PATH}"
+ else
+ export LD_LIBRARY_PATH="${TMPWORKINGDIRECTORY}"
+ fi
+ if [ -n "\$LD_PRELOAD" ]; then
+ export LD_PRELOAD="noopchroot.so \${LD_PRELOAD}"
+ else
+ export LD_PRELOAD="noopchroot.so"
+ fi
+fi
+EOF
+ cp "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg"
+ cat >> "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" <<EOF
+exec fakeroot "${DPKG:-dpkg}" --root="${TMPWORKINGDIRECTORY}/rootdir" \\
+ --log="${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log" \\
+ --force-not-root --force-bad-path "\$@"
+EOF
+ cat >> "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg" <<EOF
+exec fakeroot gdb --quiet -ex run "${DPKG:-dpkg}" --args "${DPKG:-dpkg}" --root="${TMPWORKINGDIRECTORY}/rootdir" \\
+ --log="${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log" \\
+ --force-not-root --force-bad-path "\$@"
+EOF
+ chmod +x "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/gdb-dpkg"
+ echo "Dir::Bin::dpkg \"${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg\";" > rootdir/etc/apt/apt.conf.d/99dpkg
+
+ {
+ if ! command dpkg --assert-multi-arch >/dev/null 2>&1; then
+ echo "DPKG::options:: \"--force-architecture\";" # Added to test multiarch before dpkg is ready for it…
+ fi
+ echo 'quiet::NoUpdate "true";'
+ echo 'quiet::NoStatistic "true";'
+ # too distracting for users, but helpful to detect changes
+ echo 'Acquire::Progress::Ignore::ShowErrorText "true";'
+ echo 'Acquire::Progress::Diffpercent "true";'
+ # in testcases, it can appear as if localhost has a rotation setup,
+ # hide this as we can't really deal with it properly
+ echo 'Acquire::Failure::ShowIP "false";'
+ } >> aptconfig.conf
cp "${TESTDIRECTORY}/apt.pem" "${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem"
if [ "$(id -u)" = '0' ]; then
echo "Acquire::https::CaInfo \"${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem\";" > rootdir/etc/apt/apt.conf.d/99https
echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
+ confighashes 'SHA1' # these are tests, not security best-practices
# create some files in /tmp and look at user/group to get what this means
TEST_DEFAULT_USER="$USER"
export LC_ALL=C.UTF-8
unset LANGUAGE APT_CONFIG
unset GREP_OPTIONS DEB_BUILD_PROFILES
-
msgdone "info"
}
configdpkg() {
if [ ! -e rootdir/var/lib/dpkg/status ]; then
- local STATUSFILE=$(echo "$(basename $0)" | sed -e 's/^test-/status-/' -e 's/^skip-/status-/')
+ local BASENAME="${0##*/}"
+ local STATUSFILE="status-${BASENAME#*-}"
if [ -f "${TESTDIRECTORY}/${STATUSFILE}" ]; then
cp "${TESTDIRECTORY}/${STATUSFILE}" rootdir/var/lib/dpkg/status
else
# via execvp() as used by dpkg as we don't want our rootdir to be a fullblown
# chroot directory dpkg could chroot into to execute the maintainer scripts
msgtest 'Building library to preload to make maintainerscript work in' 'dpkg'
- cat << EOF > noopchroot.c
+ cat > noopchroot.c << EOF
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
char newfile[strlen(chrootdir) + strlen(file)];
strcpy(newfile, chrootdir);
strcat(newfile, file);
+ char const * const baseadmindir = "/var/lib/dpkg";
+ char admindir[strlen(chrootdir) + strlen(baseadmindir)];
+ strcpy(admindir, chrootdir);
+ strcat(admindir, baseadmindir);
+ setenv("DPKG_ADMINDIR", admindir, 1);
return func_execvp(newfile, argv);
}
EOF
testsuccess --nomsg gcc -fPIC -shared -o noopchroot.so noopchroot.c -ldl
-
- mkdir -p "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/"
- DPKG="${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg"
- echo "#!/bin/sh
-if [ -n \"\$LD_PRELOAD\" ]; then
- export LD_PRELOAD=\"${TMPWORKINGDIRECTORY}/noopchroot.so \${LD_PRELOAD}\"
-else
- export LD_PRELOAD=\"${TMPWORKINGDIRECTORY}/noopchroot.so\"
-fi
-dpkg \"\$@\"" > $DPKG
- chmod +x $DPKG
- sed -ie "s|^DPKG::options:: \"dpkg\";\$|DPKG::options:: \"$DPKG\";|" aptconfig.conf
}
configallowinsecurerepositories() {
*) printf "$1\t$1\t$1\n";;
esac
shift
- done > ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf
+ done > "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf"
+}
+confighashes() {
+ {
+ echo 'APT::FTPArchive {'
+ {
+ while [ -n "$1" ]; do
+ printf "$1" | tr 'a-z' 'A-Z'
+ printf "\t\"true\";\n"
+ shift
+ done
+ for h in 'MD5' 'SHA1' 'SHA256' 'SHA512'; do
+ printf "$h\t\"false\";\n"
+ done
+ } | awk '!x[$1]++'
+ echo '};'
+ } >> "${TMPWORKINGDIRECTORY}/rootdir/etc/apt/apt.conf.d/ftparchive-hashes.conf"
}
-
forcecompressor() {
COMPRESSOR="$1"
COMPRESSOR_CMD="$1"
COMPRESSOR_CMD='xz --format=lzma'
else
msgtest 'Test for availability of compressor' "${COMPRESSOR}"
- msgfail
+ msgfail "${COMPRESSOR} not available"
fi
}
local SECTION="${7:-others}"
local DISTSECTION
- if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
+ if [ "$SECTION" = "${SECTION#*/}" ]; then
DISTSECTION="main"
else
- DISTSECTION="$(echo "$SECTION" | cut -d'/' -f 1)"
+ DISTSECTION="${SECTION%/*}"
fi
local BUILDDIR=incoming/${NAME}-${VERSION}
mkdir -p ${BUILDDIR}/debian/source
buildsimplenativepackage() {
local NAME="$1"
+ local NM
+ if [ "$(echo "$NAME" | cut -c 1-3)" = 'lib' ]; then
+ NM="$(echo "$NAME" | cut -c 1-4)"
+ else
+ NM="$(echo "$NAME" | cut -c 1)"
+ fi
local ARCH="$2"
local VERSION="$3"
local RELEASE="${4:-unstable}"
local SECTION="${7:-others}"
local PRIORITY="${8:-optional}"
- local FILE_TREE="$9"
- local COMPRESS_TYPE="${10:-gzip}"
+ local FILE_TREE="$9"
+ local COMPRESS_TYPE="${10:-gzip}"
local DISTSECTION
- if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
+ if [ "$SECTION" = "${SECTION#*/}" ]; then
DISTSECTION="main"
else
- DISTSECTION="$(echo "$SECTION" | cut -d'/' -f 1)"
+ DISTSECTION="${SECTION%/*}"
fi
- local BUILDDIR=${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}
+ local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
- mkdir -p $BUILDDIR/debian/source
- echo "* most suckless software product ever" > ${BUILDDIR}/FEATURES
+ mkdir -p "$BUILDDIR/debian/source"
+ echo "* most suckless software product ever" > "${BUILDDIR}/FEATURES"
echo "#!/bin/sh
-echo '$NAME says \"Hello!\"'" > ${BUILDDIR}/${NAME}
+echo '$NAME says \"Hello!\"'" > "${BUILDDIR}/${NAME}"
- echo "Copyleft by Joe Sixpack $(date +%Y)" > ${BUILDDIR}/debian/copyright
+ echo "Copyleft by Joe Sixpack $(date +%Y)" > "${BUILDDIR}/debian/copyright"
echo "$NAME ($VERSION) $RELEASE; urgency=low
* Initial release
- -- Joe Sixpack <joe@example.org> $(date -R)" > ${BUILDDIR}/debian/changelog
- echo "Source: $NAME
-Section: $SECTION
+ -- Joe Sixpack <joe@example.org> $(date -R)" > "${BUILDDIR}/debian/changelog"
+ {
+ echo "Source: $NAME
Priority: $PRIORITY
Maintainer: Joe Sixpack <joe@example.org>
-Standards-Version: 3.9.3" > ${BUILDDIR}/debian/control
- local BUILDDEPS="$(echo "$DEPENDENCIES" | grep '^Build-')"
- test -z "$BUILDDEPS" || echo "$BUILDDEPS" >> ${BUILDDIR}/debian/control
- echo "
-Package: $NAME" >> ${BUILDDIR}/debian/control
+Standards-Version: 3.9.3"
+ if [ "$SECTION" != '<none>' ]; then
+ echo "Section: $SECTION"
+ fi
+ local BUILDDEPS="$(echo "$DEPENDENCIES" | grep '^Build-')"
+ test -z "$BUILDDEPS" || echo "$BUILDDEPS"
+ echo "
+Package: $NAME"
- if [ "$ARCH" = 'all' ]; then
- echo "Architecture: all" >> ${BUILDDIR}/debian/control
- else
- echo "Architecture: any" >> ${BUILDDIR}/debian/control
- fi
- local DEPS="$(echo "$DEPENDENCIES" | grep -v '^Build-')"
- test -z "$DEPS" || echo "$DEPS" >> ${BUILDDIR}/debian/control
- echo "Description: $DESCRIPTION" >> ${BUILDDIR}/debian/control
+ if [ "$ARCH" = 'all' ]; then
+ echo "Architecture: all"
+ else
+ echo "Architecture: any"
+ fi
+ local DEPS="$(echo "$DEPENDENCIES" | grep -v '^Build-')"
+ test -z "$DEPS" || echo "$DEPS"
+ echo "Description: $DESCRIPTION"
+ } > "${BUILDDIR}/debian/control"
- echo '3.0 (native)' > ${BUILDDIR}/debian/source/format
- cd ${BUILDDIR}/..
+ echo '3.0 (native)' > "${BUILDDIR}/debian/source/format"
+ cd "${BUILDDIR}/.."
testsuccess --nomsg dpkg-source -b ${NAME}-${VERSION}
cd - >/dev/null
- sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' ${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output \
+ sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' "${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output" \
| while read SRC; do
- echo "pool/${SRC}" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist
+ echo "pool/${SRC}" >> "${BUILDDIR}/../${RELEASE}.${DISTSECTION}.srclist"
# if expr match "${SRC}" '.*\.dsc' >/dev/null 2>&1; then
# aptkey --keyring ./keys/joesixpack.pub --secret-keyring ./keys/joesixpack.sec --quiet --readonly \
# adv --yes --default-key 'Joe Sixpack' \
for arch in $(getarchitecturesfromcommalist "$ARCH"); do
msgtest "Build binary package for ${RELEASE} in ${SECTION}" "$NAME"
- rm -rf ${BUILDDIR}/debian/tmp
- mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
- cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
- cp ${BUILDDIR}/${NAME} ${BUILDDIR}/debian/tmp/usr/bin/${NAME}-${arch}
+ rm -rf "${BUILDDIR}/debian/tmp"
+ mkdir -p "${BUILDDIR}/debian/tmp/DEBIAN" "${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}" "${BUILDDIR}/debian/tmp/usr/bin"
+ cp "${BUILDDIR}/debian/copyright" "${BUILDDIR}/debian/changelog" "${BUILDDIR}/FEATURES" "${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}"
+ cp "${BUILDDIR}/${NAME}" "${BUILDDIR}/debian/tmp/usr/bin/${NAME}-${arch}"
if [ -n "$FILE_TREE" ]; then
- cp -ar "$FILE_TREE" ${BUILDDIR}/debian/tmp
+ cp -ar "$FILE_TREE" "${BUILDDIR}/debian/tmp"
fi
- (cd ${BUILDDIR}; dpkg-gencontrol -DArchitecture=$arch)
- (cd ${BUILDDIR}/debian/tmp; md5sum $(find usr/ -type f) > DEBIAN/md5sums)
+ (cd "${BUILDDIR}"; dpkg-gencontrol -DArchitecture=$arch)
+ (cd "${BUILDDIR}/debian/tmp"; md5sum $(find usr/ -type f) > DEBIAN/md5sums)
local LOG="${BUILDDIR}/../${NAME}_${VERSION}_${arch}.dpkg-deb.log"
- # ensure the right permissions as dpkg-deb ensists
- chmod 755 ${BUILDDIR}/debian/tmp/DEBIAN
- testsuccess --nomsg dpkg-deb -Z${COMPRESS_TYPE} --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/..
- echo "pool/${NAME}_${VERSION}_${arch}.deb" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist
+ # ensure the right permissions as dpkg-deb insists
+ chmod 755 "${BUILDDIR}/debian/tmp/DEBIAN"
+ testsuccess --nomsg dpkg-deb -Z${COMPRESS_TYPE} --build "${BUILDDIR}/debian/tmp" "${BUILDDIR}/.."
+ echo "pool/${NAME}_${VERSION}_${arch}.deb" >> "${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist"
done
- mkdir -p ${BUILDDIR}/../${NAME}_${VERSION}
- cp ${BUILDDIR}/debian/changelog ${BUILDDIR}/../${NAME}_${VERSION}/
- cp ${BUILDDIR}/debian/changelog ${BUILDDIR}/../${NAME}_${VERSION}.changelog
+ local CHANGEPATH="${BUILDDIR}/../${DISTSECTION}/${NM}/${NAME}/${NAME}_${VERSION}"
+ mkdir -p "$CHANGEPATH"
+ cp "${BUILDDIR}/debian/changelog" "$CHANGEPATH"
rm -rf "${BUILDDIR}"
msgdone "info"
}
local PKGNAME="$(echo "$BUILDDIR" | grep -o '[^/]*$')"
local BUILDLOG="$(readlink -f "${BUILDDIR}/../${PKGNAME}_${RELEASE}_${SECTION}.dpkg-bp.log")"
msgtest "Build package for ${RELEASE} in ${SECTION}" "$PKGNAME"
- cd $BUILDDIR
+ cd "$BUILDDIR"
if [ "$ARCH" = "all" ]; then
ARCH="$(dpkg-architecture -qDEB_HOST_ARCH 2> /dev/null)"
fi
testsuccess --nomsg dpkg-buildpackage -uc -us -a$ARCH
- cp ${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output $BUILDLOG
- local PKGS="$(grep '^dpkg-deb: building package' $BUILDLOG | cut -d'/' -f 2 | sed -e "s#'\.##")"
- local SRCS="$(grep '^dpkg-source: info: building' $BUILDLOG | grep -o '[a-z0-9._+~-]*$')"
+ cp "${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output" "$BUILDLOG"
+ local PKGS="$(grep '^dpkg-deb: building package' "$BUILDLOG" | cut -d'/' -f 2 | sed -e "s#'\.##")"
+ local SRCS="$(grep '^dpkg-source: info: building' "$BUILDLOG" | grep -o '[a-z0-9._+~-]*$')"
cd - > /dev/null
for PKG in $PKGS; do
- echo "pool/${PKG}" >> ${TMPWORKINGDIRECTORY}/incoming/${RELEASE}.${SECTION}.pkglist
+ echo "pool/${PKG}" >> "${TMPWORKINGDIRECTORY}/incoming/${RELEASE}.${SECTION}.pkglist"
done
for SRC in $SRCS; do
- echo "pool/${SRC}" >> ${TMPWORKINGDIRECTORY}/incoming/${RELEASE}.${SECTION}.srclist
+ echo "pool/${SRC}" >> "${TMPWORKINGDIRECTORY}/incoming/${RELEASE}.${SECTION}.srclist"
done
}
}
createaptftparchiveconfig() {
- local COMPRESSORS="$(cut -d' ' -f 1 ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | tr '\n' ' ')"
- COMPRESSORS="${COMPRESSORS%* }"
- local ARCHS="$(find pool/ -name '*.deb' | grep -oE '_[a-z0-9-]+\.deb$' | sort | uniq | sed -e '/^_all.deb$/ d' -e 's#^_\([a-z0-9-]*\)\.deb$#\1#' | tr '\n' ' ')"
- if [ -z "$ARCHS" ]; then
- # the pool is empty, so we will operate on faked packages - let us use the configured archs
- ARCHS="$(getarchitectures)"
- fi
- echo -n 'Dir {
- ArchiveDir "' >> ftparchive.conf
- echo -n $(readlink -f .) >> ftparchive.conf
- echo -n '";
- CacheDir "' >> ftparchive.conf
- echo -n $(readlink -f ..) >> ftparchive.conf
- echo -n '";
- FileListDir "' >> ftparchive.conf
- echo -n $(readlink -f pool/) >> ftparchive.conf
- echo -n '";
+ local COMPRESSORS="$(cut -d' ' -f 1 "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf" | tr '\n' ' ')"
+ local COMPRESSORS="${COMPRESSORS%* }"
+ local ARCHS="$(getarchitectures)"
+ cat > ftparchive.conf <<EOF
+Dir {
+ ArchiveDir "$(readlink -f .)";
+ CacheDir "$(readlink -f ..)";
+ FileListDir "$(readlink -f pool/)";
};
Default {
- Packages::Compress "'"$COMPRESSORS"'";
- Sources::Compress "'"$COMPRESSORS"'";
- Contents::Compress "'"$COMPRESSORS"'";
- Translation::Compress "'"$COMPRESSORS"'";
+ Packages::Compress "$COMPRESSORS";
+ Sources::Compress "$COMPRESSORS";
+ Contents::Compress "$COMPRESSORS";
+ Translation::Compress "$COMPRESSORS";
LongDescription "false";
};
TreeDefault {
Directory "pool/";
SrcDirectory "pool/";
};
-APT {
- FTPArchive {
- Release {
- Origin "joesixpack";
- Label "apttestcases";
- Suite "unstable";
- Description "repository with dummy packages";
- Architectures "' >> ftparchive.conf
- echo -n "$ARCHS" >> ftparchive.conf
- echo 'source";
- };
- };
-};' >> ftparchive.conf
+EOF
for DIST in $(find ./pool/ -maxdepth 1 -name '*.pkglist' -type f | cut -d'/' -f 3 | cut -d'.' -f 1 | sort | uniq); do
- echo -n 'tree "dists/' >> ftparchive.conf
- echo -n "$DIST" >> ftparchive.conf
- echo -n '" {
- Architectures "' >> ftparchive.conf
- echo -n "$ARCHS" >> ftparchive.conf
- echo -n 'source";
- FileList "' >> ftparchive.conf
- echo -n "${DIST}.\$(SECTION).pkglist" >> ftparchive.conf
- echo -n '";
- SourceFileList "' >> ftparchive.conf
- echo -n "${DIST}.\$(SECTION).srclist" >> ftparchive.conf
- echo -n '";
- Sections "' >> ftparchive.conf
- echo -n "$(find ./pool/ -maxdepth 1 -name "${DIST}.*.pkglist" -type f | cut -d'/' -f 3 | cut -d'.' -f 2 | sort | uniq | tr '\n' ' ')" >> ftparchive.conf
- echo '";
-};' >> ftparchive.conf
- done
+ cat <<EOF
+tree "dists/$DIST" {
+ Architectures "$ARCHS source";
+ FileList "${DIST}.\$(SECTION).pkglist";
+ SourceFileList "${DIST}.\$(SECTION).srclist";
+ Sections "$(find ./pool/ -maxdepth 1 -name "${DIST}.*.pkglist" -type f | cut -d'/' -f 3 | cut -d'.' -f 2 | sort | uniq | tr '\n' ' ')";
+};
+EOF
+ done >> ftparchive.conf
}
buildaptftparchivedirectorystructure() {
for SECTION in $SECTIONS; do
local ARCHS="$(grep -A 5 "dists/$DIST" ftparchive.conf | grep Architectures | cut -d'"' -f 2 | sed -e 's#source##')"
for ARCH in $ARCHS; do
- mkdir -p dists/${DIST}/${SECTION}/binary-${ARCH}
+ mkdir -p "dists/${DIST}/${SECTION}/binary-${ARCH}"
done
- mkdir -p dists/${DIST}/${SECTION}/source
- mkdir -p dists/${DIST}/${SECTION}/i18n
+ mkdir -p "dists/${DIST}/${SECTION}/source"
+ mkdir -p "dists/${DIST}/${SECTION}/i18n"
done
done
}
fi
for BUILDARCH in $ARCHS; do
local PPATH="aptarchive/dists/${RELEASE}/main/binary-${BUILDARCH}"
- mkdir -p $PPATH
- local FILE="${PPATH}/Packages"
- echo "Package: $NAME
+ mkdir -p "$PPATH"
+ {
+ echo "Package: $NAME
Priority: $PRIORITY
Section: other
Installed-Size: 42
-Maintainer: Joe Sixpack <joe@example.org>" >> $FILE
- test "$arch" = 'none' || echo "Architecture: $arch" >> $FILE
- echo "Version: $VERSION
-Filename: pool/main/${NAME}/${NAME}_${VERSION}_${arch}.deb" >> $FILE
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
- echo "Description: $(printf '%s' "$DESCRIPTION" | head -n 1)" >> $FILE
- echo "Description-md5: $(printf '%s' "$DESCRIPTION" | md5sum | cut -d' ' -f 1)" >> $FILE
- echo >> $FILE
+Maintainer: Joe Sixpack <joe@example.org>"
+ test "$arch" = 'none' || echo "Architecture: $arch"
+ echo "Version: $VERSION
+Filename: pool/main/${NAME}/${NAME}_${VERSION}_${arch}.deb"
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES"
+ echo "Description: $(printf '%s' "$DESCRIPTION" | head -n 1)"
+ echo "Description-md5: $(printf '%s' "$DESCRIPTION" | md5sum | cut -d' ' -f 1)"
+ echo
+ } >> "${PPATH}/Packages"
done
done
- mkdir -p aptarchive/dists/${RELEASE}/main/source aptarchive/dists/${RELEASE}/main/i18n
- touch aptarchive/dists/${RELEASE}/main/source/Sources
+ mkdir -p "aptarchive/dists/${RELEASE}/main/source" "aptarchive/dists/${RELEASE}/main/i18n"
+ touch "aptarchive/dists/${RELEASE}/main/source/Sources"
echo "Package: $NAME
Description-md5: $(printf '%s' "$DESCRIPTION" | md5sum | cut -d' ' -f 1)
Description-en: $DESCRIPTION
-" >> aptarchive/dists/${RELEASE}/main/i18n/Translation-en
+" >> "aptarchive/dists/${RELEASE}/main/i18n/Translation-en"
done
}
local ARCH="$3"
local VERSION="$4"
local DEPENDENCIES="$5"
+ local BINARY="${6:-$NAME}"
local ARCHS=""
local SPATH="aptarchive/dists/${RELEASE}/main/source"
mkdir -p $SPATH
local FILE="${SPATH}/Sources"
+ local DSCFILE="${NAME}_${VERSION}.dsc"
+ local TARFILE="${NAME}_${VERSION}.tar.gz"
echo "Package: $NAME
-Binary: $NAME
+Binary: $BINARY
Version: $VERSION
Maintainer: Joe Sixpack <joe@example.org>
Architecture: $ARCH" >> $FILE
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> "$FILE"
echo "Files:
- d41d8cd98f00b204e9800998ecf8427e 0 ${NAME}_${VERSION}.dsc
- d41d8cd98f00b204e9800998ecf8427e 0 ${NAME}_${VERSION}.tar.gz
-" >> $FILE
+ $(echo -n "$DSCFILE" | md5sum | cut -d' ' -f 1) $(echo -n "$DSCFILE" | wc -c) "$DSCFILE"
+ $(echo -n "$TARFILE" | md5sum | cut -d' ' -f 1) $(echo -n "$TARFILE" | wc -c) "$TARFILE"
+Checksums-Sha256:
+ $(echo -n "$DSCFILE" | sha256sum | cut -d' ' -f 1) $(echo -n "$DSCFILE" | wc -c) "$DSCFILE"
+ $(echo -n "$TARFILE" | sha256sum | cut -d' ' -f 1) $(echo -n "$TARFILE" | wc -c) "$TARFILE"
+" >> "$FILE"
}
insertinstalledpackage() {
Section: other
Installed-Size: 42
Maintainer: Joe Sixpack <joe@example.org>
-Version: $VERSION" >> $FILE
- test "$arch" = 'none' || echo "Architecture: $arch" >> $FILE
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
- echo "Description: $DESCRIPTION" >> $FILE
- echo >> $FILE
+Version: $VERSION" >> "$FILE"
+ test "$arch" = 'none' || echo "Architecture: $arch" >> "$FILE"
+ test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> "$FILE"
+ echo "Description: $DESCRIPTION" >> "$FILE"
+ echo >> "$FILE"
if [ "$(dpkg-query -W --showformat='${Multi-Arch}')" = 'same' ]; then
- echo -n > ${INFO}/${NAME}:${arch}.list
+ echo -n > "${INFO}/${NAME}:${arch}.list"
else
- echo -n > ${INFO}/${NAME}.list
+ echo -n > "${INFO}/${NAME}.list"
fi
done
}
buildaptarchivefromincoming() {
- msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on incoming packages…"
+ msginfo "Build APT archive for ${CCMD}${0##*/}${CINFO} based on incoming packages…"
cd aptarchive
[ -e pool ] || ln -s ../incoming pool
[ -e ftparchive.conf ] || createaptftparchiveconfig
[ -e dists ] || buildaptftparchivedirectorystructure
msgninfo "\tGenerate Packages, Sources and Contents files… "
- aptftparchive -qq generate ftparchive.conf
+ testsuccess aptftparchive generate ftparchive.conf
cd - > /dev/null
msgdone "info"
generatereleasefiles "$@"
}
buildaptarchivefromfiles() {
- msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on prebuild files…"
- find aptarchive -name 'Packages' -o -name 'Sources' -o -name 'Translation-*' | while read line; do
+ msginfo "Build APT archive for ${CCMD}${0##*/}${CINFO} based on prebuild files…"
+ local DIR='aptarchive'
+ if [ -d "${DIR}/dists" ]; then DIR="${DIR}/dists"; fi
+ find "$DIR" -name 'Packages' -o -name 'Sources' -o -name 'Translation-*' | while read line; do
msgninfo "\t${line} file… "
compressfile "$line" "$1"
msgdone "info"
}
compressfile() {
- cat ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | while read compressor extension command; do
+ cat "${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf" | while read compressor extension command; do
if [ "$compressor" = '.' ]; then
if [ -n "$2" ]; then
touch -d "$2" "$1"
}
getreleaseversionfromsuite() { true; }
getlabelfromsuite() { true; }
+getoriginfromsuite() { true; }
+aptftparchiverelease() {
+ aptftparchive -qq release "$@" | sed -e '/0 Release$/ d' # remove the self reference
+}
generatereleasefiles() {
# $1 is the Date header and $2 is the ValidUntil header to be set
# both should be given in notation date/touch can understand
local CODENAME="$(getcodenamefromsuite $SUITE)"
local VERSION="$(getreleaseversionfromsuite $SUITE)"
local LABEL="$(getlabelfromsuite $SUITE)"
+ local ORIGIN="$(getoriginfromsuite $SUITE)"
if [ -n "$VERSION" ]; then
VERSION="-o APT::FTPArchive::Release::Version=${VERSION}"
fi
if [ -n "$LABEL" ]; then
LABEL="-o APT::FTPArchive::Release::Label=${LABEL}"
fi
- aptftparchive -qq release $dir \
+ if [ -n "$ORIGIN" ]; then
+ ORIGIN="-o APT::FTPArchive::Release::Origin=${ORIGIN}"
+ fi
+ aptftparchiverelease "$dir" \
-o APT::FTPArchive::Release::Suite="${SUITE}" \
-o APT::FTPArchive::Release::Codename="${CODENAME}" \
${LABEL} \
+ ${ORIGIN} \
${VERSION} \
- | sed -e '/0 Release$/ d' > $dir/Release # remove the self reference
+ > "$dir/Release"
if [ "$SUITE" = "experimental" -o "$SUITE" = "experimental2" ]; then
sed -i '/^Date: / a\
-NotAutomatic: yes' $dir/Release
- fi
- if [ -n "$1" -a "$1" != "now" ]; then
- sed -i "s/^Date: .*$/Date: $(date -d "$1" '+%a, %d %b %Y %H:%M:%S %Z')/" $dir/Release
- fi
- if [ -n "$2" ]; then
- sed -i "/^Date: / a\
-Valid-Until: $(date -d "$2" '+%a, %d %b %Y %H:%M:%S %Z')" $dir/Release
+NotAutomatic: yes' "$dir/Release"
fi
done
else
- aptftparchive -qq release ./aptarchive | sed -e '/0 Release$/ d' > aptarchive/Release # remove the self reference
+ aptftparchiverelease ./aptarchive > aptarchive/Release
fi
if [ -n "$1" -a "$1" != "now" ]; then
for release in $(find ./aptarchive -name 'Release'); do
- touch -d "$1" $release
+ sed -i "s/^Date: .*$/Date: $(date -d "$1" '+%a, %d %b %Y %H:%M:%S %Z')/" "$release"
+ touch -d "$1" "$release"
done
fi
+ if [ -n "$2" ]; then
+ sed -i "/^Date: / a\
+Valid-Until: $(date -d "$2" '+%a, %d %b %Y %H:%M:%S %Z')" $(find ./aptarchive -name 'Release')
+ fi
msgdone "info"
}
setupdistsaptarchive() {
- local APTARCHIVE=$(readlink -f ./aptarchive)
+ local APTARCHIVE="$(readlink -f ./aptarchive | sed 's# #%20#g')"
rm -f root/etc/apt/sources.list.d/apt-test-*-deb.list
rm -f root/etc/apt/sources.list.d/apt-test-*-deb-src.list
for DISTS in $(find ./aptarchive/dists/ -mindepth 1 -maxdepth 1 -type d | cut -d'/' -f 4); do
- SECTIONS=$(find ./aptarchive/dists/${DISTS}/ -mindepth 1 -maxdepth 1 -type d | cut -d'/' -f 5 | tr '\n' ' ')
+ SECTIONS=$(find "./aptarchive/dists/${DISTS}/" -mindepth 1 -maxdepth 1 -type d | cut -d'/' -f 5 | tr '\n' ' ')
msgninfo "\tadd deb and deb-src sources.list lines for ${CCMD}${DISTS} ${SECTIONS}${CINFO}… "
- echo "deb file://$APTARCHIVE $DISTS $SECTIONS" > rootdir/etc/apt/sources.list.d/apt-test-${DISTS}-deb.list
- echo "deb-src file://$APTARCHIVE $DISTS $SECTIONS" > rootdir/etc/apt/sources.list.d/apt-test-${DISTS}-deb-src.list
+ echo "deb file://$APTARCHIVE $DISTS $SECTIONS" > "rootdir/etc/apt/sources.list.d/apt-test-${DISTS}-deb.list"
+ echo "deb-src file://$APTARCHIVE $DISTS $SECTIONS" > "rootdir/etc/apt/sources.list.d/apt-test-${DISTS}-deb-src.list"
msgdone "info"
done
}
setupflataptarchive() {
- local APTARCHIVE=$(readlink -f ./aptarchive)
- if [ -f ${APTARCHIVE}/Packages ]; then
+ local APTARCHIVE="$(readlink -f ./aptarchive)"
+ local APTARCHIVEURI="$(readlink -f ./aptarchive | sed 's# #%20#g')"
+ if [ -f "${APTARCHIVE}/Packages" ]; then
msgninfo "\tadd deb sources.list line… "
- echo "deb file://$APTARCHIVE /" > rootdir/etc/apt/sources.list.d/apt-test-archive-deb.list
- msgdone "info"
+ echo "deb file://$APTARCHIVEURI /" > 'rootdir/etc/apt/sources.list.d/apt-test-archive-deb.list'
+ msgdone 'info'
else
- rm -f rootdir/etc/apt/sources.list.d/apt-test-archive-deb.list
+ rm -f 'rootdir/etc/apt/sources.list.d/apt-test-archive-deb.list'
fi
- if [ -f ${APTARCHIVE}/Sources ]; then
+ if [ -f "${APTARCHIVE}/Sources" ]; then
msgninfo "\tadd deb-src sources.list line… "
- echo "deb-src file://$APTARCHIVE /" > rootdir/etc/apt/sources.list.d/apt-test-archive-deb-src.list
- msgdone "info"
+ echo "deb-src file://$APTARCHIVEURI /" > 'rootdir/etc/apt/sources.list.d/apt-test-archive-deb-src.list'
+ msgdone 'info'
else
- rm -f rootdir/etc/apt/sources.list.d/apt-test-archive-deb-src.list
+ rm -f 'rootdir/etc/apt/sources.list.d/apt-test-archive-deb-src.list'
fi
}
# the key is expired, so gpg doesn't allow to sign with and the --faked-system-time
# option doesn't exist anymore (and using faketime would add a new obscure dependency)
# therefore we 'temporary' make the key not expired and restore a backup after signing
- cp ${REXKEY}.sec $SECEXPIREBAK
- cp ${REXKEY}.pub $PUBEXPIREBAK
+ cp "${REXKEY}.sec" "$SECEXPIREBAK"
+ cp "${REXKEY}.pub" "$PUBEXPIREBAK"
local SECUNEXPIRED="${REXKEY}.sec.unexpired"
local PUBUNEXPIRED="${REXKEY}.pub.unexpired"
if [ -f "$SECUNEXPIRED" ] && [ -f "$PUBUNEXPIRED" ]; then
- cp $SECUNEXPIRED ${REXKEY}.sec
- cp $PUBUNEXPIRED ${REXKEY}.pub
+ cp "$SECUNEXPIRED" "${REXKEY}.sec"
+ cp "$PUBUNEXPIRED" "${REXKEY}.pub"
else
if ! printf "expire\n1w\nsave\n" | $GPG --default-key "$SIGNER" --command-fd 0 --edit-key "${SIGNER}" >setexpire.gpg 2>&1; then
cat setexpire.gpg
exit 1
fi
- cp ${REXKEY}.sec $SECUNEXPIRED
- cp ${REXKEY}.pub $PUBUNEXPIRED
+ cp "${REXKEY}.sec" "$SECUNEXPIRED"
+ cp "${REXKEY}.pub" "$PUBUNEXPIRED"
fi
fi
- for RELEASE in $(find ${REPODIR}/ -name Release); do
- $GPG --default-key "$SIGNER" --armor --detach-sign --sign --output ${RELEASE}.gpg ${RELEASE}
+ for RELEASE in $(find "${REPODIR}/" -name Release); do
+ $GPG --default-key "$SIGNER" --armor --detach-sign --sign --output "${RELEASE}.gpg" "${RELEASE}"
local INRELEASE="$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')"
- $GPG --default-key "$SIGNER" --clearsign --output $INRELEASE $RELEASE
+ $GPG --default-key "$SIGNER" --clearsign --output "$INRELEASE" "$RELEASE"
# we might have set a specific date for the Release file, so copy it
- touch -d "$(stat --format "%y" ${RELEASE})" ${RELEASE}.gpg ${INRELEASE}
+ touch -d "$(stat --format "%y" ${RELEASE})" "${RELEASE}.gpg" "${INRELEASE}"
done
if [ -f "$SECEXPIREBAK" ] && [ -f "$PUBEXPIREBAK" ]; then
- mv -f $SECEXPIREBAK ${REXKEY}.sec
- mv -f $PUBEXPIREBAK ${REXKEY}.pub
+ mv -f "$SECEXPIREBAK" "${REXKEY}.sec"
+ mv -f "$PUBEXPIREBAK" "${REXKEY}.pub"
fi
- msgdone "info"
+ msgdone 'info'
+}
+
+redatereleasefiles() {
+ local DATE="$(date -d "$1" '+%a, %d %b %Y %H:%M:%S %Z')"
+ for release in $(find aptarchive/ -name 'Release'); do
+ sed -i "s/^Date: .*$/Date: ${DATE}/" "$release"
+ touch -d "$DATE" "$release"
+ done
+ signreleasefiles "${2:-Joe Sixpack}"
}
webserverconfig() {
+ local WEBSERVER="${3:-http://localhost:${APTHTTPPORT}}"
local NOCHECK=false
if [ "$1" = '--no-check' ]; then
NOCHECK=true
local DOWNLOG='rootdir/tmp/download-testfile.log'
local STATUS='downloaded/webserverconfig.status'
rm -f "$STATUS" "$DOWNLOG"
+ # very very basic URI encoding
local URI
if [ -n "$2" ]; then
msgtest "Set webserver config option '${1}' to" "$2"
- URI="http://localhost:8080/_config/set/${1}/${2}"
+ URI="${WEBSERVER}/_config/set/$(echo "${1}" | sed -e 's/\//%2f/g')/$(echo "${2}" | sed -e 's/\//%2f/g')"
else
msgtest 'Clear webserver config option' "${1}"
- URI="http://localhost:8080/_config/clear/${1}"
+ URI="${WEBSERVER}/_config/clear/$(echo "${1}" | sed -e 's/\//%2f/g')"
fi
if downloadfile "$URI" "$STATUS" > "$DOWNLOG"; then
msgpass
else
- cat "$DOWNLOG" "$STATUS" || true
- msgfail
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/webserverconfig.output"
+ cat "$DOWNLOG" "$STATUS" >"$OUTPUT" 2>&1 || true
+ msgfailoutput '' "$OUTPUT"
fi
$NOCHECK || testwebserverlaststatuscode '200'
}
rewritesourceslist() {
- local APTARCHIVE="file://$(readlink -f "${TMPWORKINGDIRECTORY}/aptarchive")"
+ local APTARCHIVE="file://$(readlink -f "${TMPWORKINGDIRECTORY}/aptarchive" | sed 's# #%20#g')"
+ local APTARCHIVE2="copy://$(readlink -f "${TMPWORKINGDIRECTORY}/aptarchive" | sed 's# #%20#g')"
for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
- sed -i $LIST -e "s#$APTARCHIVE#${1}#" -e "s#http://localhost:8080/#${1}#" -e "s#https://localhost:4433/#${1}#"
+ sed -i $LIST -e "s#$APTARCHIVE#${1}#" -e "s#$APTARCHIVE2#${1}#" \
+ -e "s#http://localhost:${APTHTTPPORT}/#${1}#" \
+ -e "s#https://localhost:${APTHTTPSPORT}/#${1}#"
done
}
}
changetowebserver() {
+ local REWRITE='no'
if [ "$1" != '--no-rewrite' ]; then
- rewritesourceslist 'http://localhost:8080/'
+ REWRITE='yes'
else
shift
fi
- if test -x ${APTWEBSERVERBINDIR}/aptwebserver; then
+ if test -x "${APTWEBSERVERBINDIR}/aptwebserver"; then
cd aptarchive
local LOG="webserver.log"
- if ! aptwebserver -o aptwebserver::fork=1 "$@" >$LOG 2>&1 ; then
+ if ! aptwebserver --port 0 -o aptwebserver::fork=1 -o aptwebserver::portfile='aptwebserver.port' "$@" >$LOG 2>&1 ; then
cat $LOG
false
fi
- waitforpidfile aptwebserver.pid
+ waitforpidfile aptwebserver.pid
local PID="$(cat aptwebserver.pid)"
if [ -z "$PID" ]; then
msgdie 'Could not fork aptwebserver successfully'
fi
addtrap "kill $PID;"
+ waitforpidfile aptwebserver.port
+ APTHTTPPORT="$(cat aptwebserver.port)"
+ if [ -z "$APTHTTPPORT" ]; then
+ msgdie 'Could not get port for aptwebserver successfully'
+ fi
cd - > /dev/null
else
msgdie 'You have to build aptwerbserver or install a webserver'
fi
+ if [ "$REWRTE" != 'yes' ]; then
+ rewritesourceslist "http://localhost:${APTHTTPPORT}/"
+ fi
}
changetohttpswebserver() {
output = /dev/null
[https]
-accept = 4433
-connect = 8080
-" > ${TMPWORKINGDIRECTORY}/stunnel.conf
+accept = 0
+connect = $APTHTTPPORT
+" > "${TMPWORKINGDIRECTORY}/stunnel.conf"
stunnel4 "${TMPWORKINGDIRECTORY}/stunnel.conf"
waitforpidfile "${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid"
- local PID="$(cat ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid)"
+ local PID="$(cat "${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid")"
if [ -z "$PID" ]; then
msgdie 'Could not fork stunnel4 successfully'
fi
addtrap 'prefix' "kill ${PID};"
- rewritesourceslist 'https://localhost:4433/'
+ APTHTTPSPORT="$(lsof -i | awk "/^stunnel4 / && \$2 == \"${PID}\" {print \$9; exit; }" | cut -d':' -f 2)"
+ webserverconfig 'aptwebserver::port::https' "$APTHTTPSPORT" "https://localhost:${APTHTTPSPORT}"
+ rewritesourceslist "https://localhost:${APTHTTPSPORT}/"
}
changetocdrom() {
mkdir -p rootdir/media/cdrom/.disk
local CD="$(readlink -f rootdir/media/cdrom)"
- echo "acquire::cdrom::mount \"${CD}\";
-acquire::cdrom::${CD}/::mount \"mv ${CD}-unmounted ${CD}\";
-acquire::cdrom::${CD}/::umount \"mv ${CD} ${CD}-unmounted\";
-acquire::cdrom::autodetect 0;" > rootdir/etc/apt/apt.conf.d/00cdrom
- echo -n "$1" > ${CD}/.disk/info
+ cat > rootdir/etc/apt/apt.conf.d/00cdrom <<EOF
+acquire::cdrom::mount "${CD}";
+acquire::cdrom::"${CD}/"::mount "mv ${CD}-unmounted ${CD}";
+acquire::cdrom::"${CD}/"::umount "mv ${CD} ${CD}-unmounted";
+acquire::cdrom::autodetect 0;
+EOF
+ echo -n "$1" > "${CD}/.disk/info"
if [ ! -d aptarchive/dists ]; then
msgdie 'Flat file archive cdroms can not be created currently'
return 1
fi
mv aptarchive/dists "$CD"
- ln -s "$(readlink -f ./incoming)" $CD/pool
+ ln -s "$(readlink -f ./incoming)" "$CD/pool"
find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list' -delete
# start with an unmounted disk
mv "${CD}" "${CD}-unmounted"
# we don't want the disk to be modifiable
- addtrap 'prefix' "chmod -f -R +w $PWD/rootdir/media/cdrom/dists/ $PWD/rootdir/media/cdrom-unmounted/dists/ || true;"
+ addtrap 'prefix' "chmod -f -R +w \"$PWD/rootdir/media/cdrom/dists/\" \"$PWD/rootdir/media/cdrom-unmounted/dists/\" || true;"
chmod -R 555 rootdir/media/cdrom-unmounted/dists
}
downloadfile() {
- local PROTO="$(echo "$1" | cut -d':' -f 1 )"
- apthelper -o Debug::Acquire::${PROTO}=1 \
- download-file "$1" "$2" 2>&1 || true
+ local PROTO="${1%%:*}"
+ if ! apthelper -o Debug::Acquire::${PROTO}=1 -o Debug::pkgAcquire::Worker=1 \
+ download-file "$1" "$2" "$3" 2>&1 ; then
+ return 1
+ fi
# only if the file exists the download was successful
if [ -r "$2" ]; then
return 0
fi
}
+testoutputequal() {
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testoutputequal.output"
+ local COMPAREFILE="$1"
+ shift
+ if "$@" 2>&1 | checkdiff "$COMPAREFILE" - >"$OUTPUT" 2>&1; then
+ msgpass
+ else
+ echo "=== content of file we compared with (${COMPAREFILE}) ===" >>"${OUTPUT}"
+ cat "$COMPAREFILE" >>"${OUTPUT}"
+ msgfailoutput '' "$OUTPUT" "$@"
+ fi
+}
+
testfileequal() {
+ msggroup 'testfileequal'
+ local MSG='Test for correctness of file'
+ if [ "$1" = '--nomsg' ]; then
+ MSG=''
+ shift
+ fi
local FILE="$1"
shift
- msgtest "Test for correctness of file" "$FILE"
+ if [ -n "$MSG" ]; then
+ msgtest "$MSG" "$FILE"
+ fi
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfileequal.output"
if [ -z "$*" ]; then
- echo -n "" | checkdiff $FILE - && msgpass || msgfail
+ testoutputequal "$FILE" echo -n ''
else
- echo "$*" | checkdiff $FILE - && msgpass || msgfail
+ testoutputequal "$FILE" echo "$*"
fi
+ msggroup
}
testempty() {
+ msggroup 'testempty'
msgtest "Test for no output of" "$*"
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testempty.comparefile"
- if "$@" >$COMPAREFILE 2>&1 && test ! -s $COMPAREFILE; then
+ if ("$@" >"$COMPAREFILE" 2>&1 || true) && test ! -s "$COMPAREFILE"; then
msgpass
else
- echo
- cat $COMPAREFILE
- msgfail
+ msgfailoutput '' "$COMPAREFILE" "$@"
fi
aptautotest 'testempty' "$@"
+ msggroup
+}
+testnotempty() {
+ msggroup 'testnotempty'
+ msgtest "Test for some output of" "$*"
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testnotempty.comparefile"
+ if ("$@" >"$COMPAREFILE" 2>&1 || true) && test -s "$COMPAREFILE"; then
+ msgpass
+ else
+ msgfailoutput '' "$COMPAREFILE" "$@"
+ fi
+ aptautotest 'testnotempty' "$@"
+ msggroup
}
testequal() {
+ msggroup 'testequal'
local MSG='Test of equality of'
if [ "$1" = '--nomsg' ]; then
MSG=''
fi
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequal.comparefile"
- echo "$1" > $COMPAREFILE
+ echo "$1" > "$COMPAREFILE"
shift
if [ -n "$MSG" ]; then
msgtest "$MSG" "$*"
fi
- "$@" 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ testoutputequal "$COMPAREFILE" "$@"
aptautotest 'testequal' "$@"
+ msggroup
}
testequalor2() {
+ msggroup 'testequalor2'
local COMPAREFILE1="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequalor2.comparefile1"
local COMPAREFILE2="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequalor2.comparefile2"
local COMPAREAGAINST="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequalor2.compareagainst"
- echo "$1" > $COMPAREFILE1
- echo "$2" > $COMPAREFILE2
+ echo "$1" > "$COMPAREFILE1"
+ echo "$2" > "$COMPAREFILE2"
shift 2
msgtest "Test for equality OR of" "$*"
- "$@" >$COMPAREAGAINST 2>&1 || true
- if checkdiff $COMPAREFILE1 $COMPAREAGAINST >/dev/null 2>&1 || \
- checkdiff $COMPAREFILE2 $COMPAREAGAINST >/dev/null 2>&1
+ "$@" >"$COMPAREAGAINST" 2>&1 || true
+ if checkdiff "$COMPAREFILE1" "$COMPAREAGAINST" >/dev/null 2>&1 || \
+ checkdiff "$COMPAREFILE2" "$COMPAREAGAINST" >/dev/null 2>&1
then
msgpass
else
- echo -n "\n${CINFO}Diff against OR 1${CNORMAL}"
- checkdiff $COMPAREFILE1 $COMPAREAGAINST || true
- echo -n "${CINFO}Diff against OR 2${CNORMAL}"
- checkdiff $COMPAREFILE2 $COMPAREAGAINST || true
- msgfail
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testequal.output"
+ echo -n "\n${CINFO}Diff against OR 1${CNORMAL}" >"$OUTPUT" 2>&1
+ checkdiff "$COMPAREFILE1" "$COMPAREAGAINST" >"$OUTPUT" 2>&1 || true
+ echo -n "${CINFO}Diff against OR 2${CNORMAL}" >"$OUTPUT" 2>&1
+ checkdiff "$COMPAREFILE2" "$COMPAREAGAINST" >"$OUTPUT" 2>&1 || true
+ msgfailoutput '' "$OUTPUT"
fi
aptautotest 'testequalor2' "$@"
+ msggroup
}
testshowvirtual() {
+ msggroup 'testshowvirtual'
local VIRTUAL="N: Can't select versions from package '$1' as it is purely virtual"
local PACKAGE="$1"
shift
N: No packages found"
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testshowvirtual.comparefile"
local ARCH="$(getarchitecture 'native')"
- echo "$VIRTUAL" | sed -e "s/:$ARCH//" -e 's/:all//' > $COMPAREFILE
- aptcache show -q=0 $PACKAGE 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ echo "$VIRTUAL" | sed -e "s/:$ARCH//" -e 's/:all//' >"$COMPAREFILE"
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testshowvirtual.output"
+ testoutputequal "$COMPAREFILE" aptcache show -q=0 "$PACKAGE"
+ msggroup
}
testnopackage() {
+ msggroup 'testnopackage'
msgtest "Test for non-existent packages" "apt-cache show $*"
local SHOWPKG="$(aptcache show "$@" 2>&1 | grep '^Package: ')"
if [ -n "$SHOWPKG" ]; then
- echo >&2
- echo >&2 "$SHOWPKG"
- msgfail
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testnopackage.output"
+ echo "$SHOWPKG" >"$OUTPUT"
+ msgfailoutput '' "$OUTPUT"
else
msgpass
fi
+ msggroup
}
-testdpkginstalled() {
- msgtest "Test for correctly installed package(s) with" "dpkg -l $*"
- local PKGS="$(dpkg -l "$@" 2>/dev/null | grep '^i' | wc -l)"
- if [ "$PKGS" != $# ]; then
- echo >&2 $PKGS
- dpkg -l "$@" | grep '^[a-z]' >&2
- msgfail
+testdpkgstatus() {
+ msggroup 'testdpkgstatus'
+ local STATE="$1"
+ local NR="$2"
+ shift 2
+ msgtest "Test that $NR package(s) are in state $STATE with" "dpkg -l $*"
+ local PKGS="$(dpkg -l "$@" 2>/dev/null | grep "^${STATE}" | wc -l)"
+ if [ "$PKGS" != $NR ]; then
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testnopackage.output"
+ echo "$PKGS" >"$OUTPUT"
+ dpkg -l "$@" | grep '^[a-z]' >"$OUTPUT" >&2 || true
+ msgfailoutput '' "$OUTPUT"
else
msgpass
fi
+ msggroup
+}
+
+testdpkginstalled() {
+ msggroup 'testdpkginstalled'
+ testdpkgstatus 'ii' "$#" "$@"
+ msggroup
}
testdpkgnotinstalled() {
- msgtest "Test for correctly not-installed package(s) with" "dpkg -l $*"
- local PKGS="$(dpkg -l "$@" 2> /dev/null | grep '^i' | wc -l)"
- if [ "$PKGS" != 0 ]; then
- echo
- dpkg -l "$@" | grep '^[a-z]' >&2
- msgfail
- else
- msgpass
- fi
+ msggroup 'testdpkgnotinstalled'
+ testdpkgstatus 'ii' '0' "$@"
+ msggroup
}
testmarkedauto() {
+ msggroup 'testmarkedauto'
local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testmarkedauto.comparefile"
if [ -n "$1" ]; then
msgtest 'Test for correctly marked as auto-installed' "$*"
- while [ -n "$1" ]; do echo "$1"; shift; done | sort > $COMPAREFILE
+ while [ -n "$1" ]; do echo "$1"; shift; done | sort > "$COMPAREFILE"
else
msgtest 'Test for correctly marked as auto-installed' 'no package'
- echo -n > $COMPAREFILE
+ echo -n > "$COMPAREFILE"
+ fi
+ testoutputequal "$COMPAREFILE" aptmark showauto
+ msggroup
+}
+testmarkedmanual() {
+ msggroup 'testmarkedmanual'
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testmarkedmanual.comparefile"
+ if [ -n "$1" ]; then
+ msgtest 'Test for correctly marked as manually installed' "$*"
+ while [ -n "$1" ]; do echo "$1"; shift; done | sort > "$COMPAREFILE"
+ else
+ msgtest 'Test for correctly marked as manually installed' 'no package'
+ echo -n > "$COMPAREFILE"
fi
- aptmark showauto 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
+ testoutputequal "$COMPAREFILE" aptmark showmanual
+ msggroup
}
msgfailoutput() {
+ msgreportheader 'msgfailoutput'
local MSG="$1"
local OUTPUT="$2"
shift 2
- echo >&2
if [ "$1" = 'grep' ]; then
+ echo >&2
while [ -n "$2" ]; do shift; done
echo "#### Complete file: $1 ####"
cat >&2 "$1" || true
echo '#### grep output ####'
elif [ "$1" = 'test' ]; then
+ echo >&2
# doesn't support ! or non-file flags
msgfailoutputstatfile() {
local FILEFLAGS='^-[bcdefgGhkLOprsStuwx]$'
if expr match "$1" "$FILEFLAGS" >/dev/null; then
echo "#### stat(2) of file: $2 ####"
stat "$2" || true
+ if test -e "$2"; then
+ echo "#### Complete file: $2 ####"
+ cat >&2 "$2" || true
+ fi
fi
}
msgfailoutputstatfile "$2" "$3"
done
echo '#### test output ####'
fi
- cat >&2 $OUTPUT
+ cat >&2 "$OUTPUT"
msgfail "$MSG"
}
testsuccess() {
+ msggroup 'testsuccess'
if [ "$1" = '--nomsg' ]; then
shift
else
msgtest 'Test for successful execution of' "$*"
fi
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output"
- if "$@" >${OUTPUT} 2>&1; then
+ if "$@" >"${OUTPUT}" 2>&1; then
if expr match "$1" '^apt.*' >/dev/null; then
if grep -q -E ' runtime error: ' "$OUTPUT"; then
msgfailoutput 'compiler detected undefined behavior' "$OUTPUT" "$@"
- elif grep -q -E '^[WE]: ' "$OUTPUT"; then
- msgfailoutput 'successful run, but output contains warnings/errors' "$OUTPUT" "$@"
+ elif grep -E '^[WE]: ' "$OUTPUT" > "${TMPWORKINGDIRECTORY}/rootdir/tmp/checkforwarnings.output" 2>&1; then
+ if [ "$IGNORE_PTY_NOT_MOUNTED" = '1' ]; then
+ if echo 'E: Can not write log (Is /dev/pts mounted?) - posix_openpt (2: No such file or directory)' \
+ | cmp - "${TMPWORKINGDIRECTORY}/rootdir/tmp/checkforwarnings.output" >/dev/null 2>&1; then
+ msgpass
+ else
+ msgfailoutput 'successful run, but output contains warnings/errors' "$OUTPUT" "$@"
+ fi
+ else
+ msgfailoutput 'successful run, but output contains warnings/errors' "$OUTPUT" "$@"
+ fi
else
msgpass
fi
msgfailoutput "exitcode $EXITCODE" "$OUTPUT" "$@"
fi
aptautotest 'testsuccess' "$@"
+ msggroup
}
testwarning() {
+ msggroup 'testwarning'
if [ "$1" = '--nomsg' ]; then
shift
else
msgtest 'Test for successful execution with warnings of' "$*"
fi
- local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testsuccess.output"
- if "$@" >${OUTPUT} 2>&1; then
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testwarning.output"
+ if "$@" >"${OUTPUT}" 2>&1; then
if expr match "$1" '^apt.*' >/dev/null; then
if grep -q -E ' runtime error: ' "$OUTPUT"; then
msgfailoutput 'compiler detected undefined behavior' "$OUTPUT" "$@"
fi
else
local EXITCODE=$?
- echo >&2
- cat >&2 $OUTPUT
- msgfail "exitcode $EXITCODE"
+ msgfailoutput "exitcode $EXITCODE" "$OUTPUT" "$@"
fi
aptautotest 'testwarning' "$@"
+ msggroup
}
testfailure() {
+ msggroup 'testfailure'
if [ "$1" = '--nomsg' ]; then
shift
else
msgtest 'Test for failure in execution of' "$*"
fi
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfailure.output"
- if "$@" >${OUTPUT} 2>&1; then
+ if "$@" >"${OUTPUT}" 2>&1; then
local EXITCODE=$?
msgfailoutput "exitcode $EXITCODE" "$OUTPUT" "$@"
else
local EXITCODE=$?
if expr match "$1" '^apt.*' >/dev/null; then
- if grep -q -E ' runtime error: ' "$OUTPUT"; then
- msgfailoutput 'compiler detected undefined behavior' "$OUTPUT" "$@"
- elif ! grep -q -E '^E: ' "$OUTPUT"; then
- msgfailoutput "run failed with exitcode ${EXITCODE}, but with no errors" "$OUTPUT" "$@"
+ if [ "$1" = 'aptkey' ]; then
+ if grep -q -E " Can't check signature: " "$OUTPUT" || \
+ grep -q -E " BAD signature from " "$OUTPUT"; then
+ msgpass
+ else
+ msgfailoutput "run failed with exitcode ${EXITCODE}, but no signature error" "$OUTPUT" "$@"
+ fi
else
- msgpass
+ if grep -q -E ' runtime error: ' "$OUTPUT"; then
+ msgfailoutput 'compiler detected undefined behavior' "$OUTPUT" "$@"
+ elif grep -q -E '==ERROR' "$OUTPUT"; then
+ msgfailoutput 'compiler sanitizers reported errors' "$OUTPUT" "$@"
+ elif ! grep -q -E '^E: ' "$OUTPUT"; then
+ msgfailoutput "run failed with exitcode ${EXITCODE}, but with no errors" "$OUTPUT" "$@"
+ else
+ msgpass
+ fi
fi
else
msgpass
fi
fi
aptautotest 'testfailure' "$@"
+ msggroup
+}
+
+testreturnstateequal() {
+ local STATE="$1"
+ msggroup "${STATE}equal"
+ if [ "$2" != '--nomsg' ]; then
+ local CMP="$2"
+ shift 2
+ "$STATE" "$@"
+ testfileequal "${TMPWORKINGDIRECTORY}/rootdir/tmp/${STATE}.output" "$CMP"
+ else
+ local CMP="$3"
+ shift 3
+ "$STATE" --nomsg "$@"
+ testfileequal "${TMPWORKINGDIRECTORY}/rootdir/tmp/${STATE}.output" "$CMP"
+ fi
+ msggroup
+}
+testsuccessequal() {
+ testreturnstateequal 'testsuccess' "$@"
+}
+testwarningequal() {
+ testreturnstateequal 'testwarning' "$@"
+}
+testfailureequal() {
+ testreturnstateequal 'testfailure' "$@"
+}
+
+testfailuremsg() {
+ msggroup 'testfailuremsg'
+ local CMP="$1"
+ shift
+ testfailure "$@"
+ msgtest 'Check that the output of the previous failed command has expected' 'failures and warnings'
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfailuremsg.comparefile"
+ grep '^\(W\|E\):' "${TMPWORKINGDIRECTORY}/rootdir/tmp/testfailure.output" > "$COMPAREFILE" 2>&1 || true
+ testoutputequal "$COMPAREFILE" echo "$CMP"
+ msggroup
+}
+testwarningmsg() {
+ msggroup 'testwarningmsg'
+ local CMP="$1"
+ shift
+ testwarning "$@"
+ msgtest 'Check that the output of the previous warned command has expected' 'warnings'
+ local COMPAREFILE="${TMPWORKINGDIRECTORY}/rootdir/tmp/testwarningmsg.comparefile"
+ grep '^\(W\|E\):' "${TMPWORKINGDIRECTORY}/rootdir/tmp/testwarning.output" > "$COMPAREFILE" 2>&1 || true
+ testoutputequal "$COMPAREFILE" echo "$CMP"
+ msggroup
}
testfilestats() {
+ msggroup 'testfilestats'
msgtest "Test that file $1 has $2 $3" "$4"
if [ "$4" "$3" "$(stat --format "$2" "$1")" ]; then
msgpass
else
- echo >&2
- ls -ld >&2 "$1"
- echo -n >&2 "stat(1) reports for $2: "
- stat --format "$2" "$1"
- msgfail
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testfilestats.output"
+ {
+ ls -ld "$1" || true
+ echo -n "stat(1) reports for $2: "
+ stat --format "$2" "$1" || true
+ } >"$OUTPUT" 2>&1
+ msgfailoutput '' "$OUTPUT"
fi
+ msggroup
}
testaccessrights() {
+ msggroup 'testaccessrights'
testfilestats "$1" '%a' '=' "$2"
+ msggroup
}
testwebserverlaststatuscode() {
+ msggroup 'testwebserverlaststatuscode'
local DOWNLOG='rootdir/tmp/webserverstatus-testfile.log'
local STATUS='downloaded/webserverstatus-statusfile.log'
rm -f "$DOWNLOG" "$STATUS"
msgtest 'Test last status code from the webserver was' "$1"
- if downloadfile "http://localhost:8080/_config/find/aptwebserver::last-status-code" "$STATUS" > "$DOWNLOG" && [ "$(cat "$STATUS")" = "$1" ]; then
+ if downloadfile "http://localhost:${APTHTTPPORT}/_config/find/aptwebserver::last-status-code" "$STATUS" > "$DOWNLOG" && [ "$(cat "$STATUS")" = "$1" ]; then
msgpass
else
- echo >&2
- if [ -n "$2" ]; then
- shift
- echo >&2 '#### Additionally provided output files contain:'
- cat >&2 "$@"
- fi
- echo >&2 '#### Download log of the status code:'
- cat >&2 "$DOWNLOG"
- msgfail "Status was $(cat "$STATUS")"
+ local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/testwebserverlaststatuscode.output"
+ {
+ if [ -n "$2" ]; then
+ shift
+ echo >&2 '#### Additionally provided output files contain:'
+ cat >&2 "$@"
+ fi
+ echo >&2 '#### Download log of the status code:'
+ cat >&2 "$DOWNLOG"
+ } >"$OUTPUT" 2>&1
+ msgfailoutput "Status was $(cat "$STATUS")" "$OUTPUT"
fi
+ msggroup
}
pause() {
}
listcurrentlistsdirectory() {
- find rootdir/var/lib/apt/lists -maxdepth 1 -type d | while read line; do
- stat --format '%U:%G:%a:%n' "$line"
- done
- find rootdir/var/lib/apt/lists -maxdepth 1 \! -type d | while read line; do
- stat --format '%U:%G:%a:%s:%y:%n' "$line"
- done
+ {
+ find rootdir/var/lib/apt/lists -maxdepth 1 -type d | while read line; do
+ stat --format '%U:%G:%a:%n' "$line"
+ done
+ find rootdir/var/lib/apt/lists -maxdepth 1 \! -type d | while read line; do
+ stat --format '%U:%G:%a:%s:%y:%n' "$line"
+ done
+ } | sort
}
-### convinience hacks ###
+### convenience hacks ###
mkdir() {
# creating some directories by hand is a tedious task, so make it look simple
if [ "$*" = '-p rootdir/var/lib/apt/lists' ] || [ "$*" = "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists" ] ||
local TESTCALL="$1"
local CMD="$2"
local FIRSTOPT="$3"
- local AUTOTEST="aptautotest_$(basename "$CMD" | tr -d '-')_$(echo "$FIRSTOPT" | tr -d '-')"
+ local AUTOTEST="aptautotest_$(echo "${CMD##*/}_${FIRSTOPT}" | tr -d '-')"
if command -v $AUTOTEST >/dev/null; then
shift 3
# save and restore the *.output files from other tests
# as we might otherwise override them in these automatic tests
- rm -rf ${TMPWORKINGDIRECTORY}/rootdir/tmp-before
- mv ${TMPWORKINGDIRECTORY}/rootdir/tmp ${TMPWORKINGDIRECTORY}/rootdir/tmp-before
- mkdir ${TMPWORKINGDIRECTORY}/rootdir/tmp
+ rm -rf "${TMPWORKINGDIRECTORY}/rootdir/tmp-before"
+ mv "${TMPWORKINGDIRECTORY}/rootdir/tmp" "${TMPWORKINGDIRECTORY}/rootdir/tmp-before"
+ mkdir "${TMPWORKINGDIRECTORY}/rootdir/tmp"
$AUTOTEST "$TESTCALL" "$@"
- rm -rf ${TMPWORKINGDIRECTORY}/rootdir/tmp-aptautotest
- mv ${TMPWORKINGDIRECTORY}/rootdir/tmp ${TMPWORKINGDIRECTORY}/rootdir/tmp-aptautotest
- mv ${TMPWORKINGDIRECTORY}/rootdir/tmp-before ${TMPWORKINGDIRECTORY}/rootdir/tmp
+ rm -rf "${TMPWORKINGDIRECTORY}/rootdir/tmp-aptautotest"
+ mv "${TMPWORKINGDIRECTORY}/rootdir/tmp" "${TMPWORKINGDIRECTORY}/rootdir/tmp-aptautotest"
+ mv "${TMPWORKINGDIRECTORY}/rootdir/tmp-before" "${TMPWORKINGDIRECTORY}/rootdir/tmp"
fi
}
aptautotest_aptget_update() {
+ local TESTCALL="$1"
+ while [ -n "$2" ]; do
+ if [ "$2" = '--print-uris' ]; then return; fi # simulation mode
+ shift
+ done
if ! test -d "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists"; then return; fi
testfilestats "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt" '%U:%G:%a' '=' "${TEST_DEFAULT_USER}:${TEST_DEFAULT_GROUP}:755"
testfilestats "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists" '%U:%G:%a' '=' "${TEST_DEFAULT_USER}:${TEST_DEFAULT_GROUP}:755"
# all copied files are properly chmodded
- for file in $(find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists" -maxdepth 1 -type f ! -name 'lock'); do
+ local backupIFS="$IFS"
+ IFS="$(printf "\n\b")"
+ for file in $(find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists" -type f ! -name 'lock'); do
testfilestats "$file" '%U:%G:%a' '=' "${TEST_DEFAULT_USER}:${TEST_DEFAULT_GROUP}:644"
done
+ IFS="$backupIFS"
+ if [ "$TESTCALL" = 'testsuccess' ]; then
+ # failure cases can retain partial files and such
+ testempty find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists/partial" -mindepth 1 ! \( -name 'lock' -o -name '*.FAILED' \)
+ fi
}
aptautotest_apt_update() { aptautotest_aptget_update "$@"; }
+aptautotest_aptcdrom_add() { aptautotest_aptget_update "$@"; }
+
+testaptautotestnodpkgwarning() {
+ local TESTCALL="$1"
+ while [ -n "$2" ]; do
+ if expr match "$2" '^-[a-z]*s' >/dev/null 2>&1; then return; fi # simulation mode
+ if expr match "$2" '^-dy\?' >/dev/null 2>&1; then return; fi # download-only mode
+ shift
+ done
+ testfailure grep '^dpkg: warning:.*ignor.*' "${TMPWORKINGDIRECTORY}/rootdir/tmp-before/${TESTCALL}.output"
+}
+
+aptautotest_aptget_install() { testaptautotestnodpkgwarning "$@"; }
+aptautotest_aptget_remove() { testaptautotestnodpkgwarning "$@"; }
+aptautotest_aptget_purge() { testaptautotestnodpkgwarning "$@"; }
+aptautotest_apt_install() { testaptautotestnodpkgwarning "$@"; }
+aptautotest_apt_remove() { testaptautotestnodpkgwarning "$@"; }
+aptautotest_apt_purge() { testaptautotestnodpkgwarning "$@"; }
projects / apt.git / blobdiff