merge 1695..1701 from the lp:~mvo/apt/mvo branch

[apt.git] / doc / examples / apt-https-method-example.conf

/* This file is a sample configuration for apt https method. Configuration
   parameters found in this example file are expected to be used in main
   apt.conf file, just like other configuration parameters for different
   methods (ftp, file, ...).

   This example file starts with a common setup that voluntarily exhibits
   all available configurations knobs with simple comments. Extended
   comments on the behavior of the option is provided at the end for
   better readibility. As a matter of fact, a common configuration file
   will certainly contain far less elements and benefit of default values
   for many parameters.

   Because some configuration parameters for apt https method in following
   examples apply to specific (fictional) repositories, the associated
   sources.list file is provided here:

   ...

   deb     https://secure.dom1.tld/debian unstable main contrib non-free
   deb-src https://secure.dom1.tld/debian unstable main contrib non-free

   deb     https://secure.dom2.tld/debian unstable main contrib non-free
   deb-src https://secure.dom2.tld/debian unstable main contrib non-free

   ...


   Some notes on the servers:

    - secure.dom1.tld is freely accessible using https (no client
      authentication is required).
    - secure.dom1.tld certificate is part of a multi level PKI, and we
      want to specifically check the issuer of its certificate. We do
      not have the constraint for secure.dom2.tld
    - secure.dom2.tld requires client authentication by certificate
      to access its content.
    - The certificate presented by both server have (as expected) a CN that
      matches their respective DNS names.
    - We have CRL available for both dom1.tld and dom2.tld PKI, and intend
      to use them.
    - It somtimes happens that we had other more generic https available
      repository to our list. We want the checks to be performed against
      a common list of anchors (like the one provided by ca-certificates
      package for instance)

   The sample configuration below basically covers those simpe needs.
*/


// Verify peer certificate and also matching between certificate name
// and server name as provided in sources.list (default values)
Acquire::https::Verify-Peer "true";
Acquire::https::Verify-Host "true";

// Except otherwise specified, use that list of anchors
Acquire::https::CaInfo     "/etc/ssl/certs/ca-certificates.pem";

// Use a specific anchor and associated CRL. Enforce issuer of
// server certificate using its cert.
Acquire::https::secure.dom1.tld::CaInfo     "/etc/apt/certs/ca-dom1-crt.pem";
Acquire::https::secure.dom1.tld::CrlFile    "/etc/apt/certs/ca-dom1-crl.pem";
Acquire::https::secure.dom1.tld::IssuerCert "/etc/apt/certs/secure.dom1-issuer-crt.pem";

// Like previous for anchor and CRL, but also provide our
// certificate and keys for client authentication.
Acquire::https::secure.dom2.tld::CaInfo  "/etc/apt/certs/ca-dom2-crt.pem";
Acquire::https::secure.dom2.tld::CrlFile "/etc/apt/certs/ca-dom2-crl.pem";
Acquire::https::secure.dom2.tld::SslCert "/etc/apt/certs/my-crt.pem";
Acquire::https::secure.dom2.tld::SslKey  "/etc/apt/certs/my-key.pem";

// No need to downgrade, TLS will be proposed by default. Uncomment
// to have SSLv3 proposed.
// Acquire::https::mirror.ipv6.ssi.corp::SslForceVersion "SSLv3";

// No need for more debug if every is fine (default). Uncomment
// me to get additional information.
// Debug::Acquire::https "true";


/*
  Options with extended comments:

  Acquire::https[::repo.domain.tld]::CaInfo  "/path/to/ca/certs.pem";

    A string providing the path of a file containing the list of trusted
    CA certificates used to verify the server certificate. The pointed
    file is made of the concatenation of the CA certificates (in
    PEM format) creating the chain used for the verification of the path
    from the root (self signed one). If the remote server provides the
    whole chain during the exchange, the file need only contain the root
    certificate. Otherwise, the whole chain is required.

    If you need to support multiple authorities, the only way is to
    concatenate everything.

    If None is provided, the default CA bundle used by GnuTLS (apt https
    method is linked against libcurl-gnutls) is used. At the time of
    writing, /etc/ssl/certs/ca-certificates.crt.

    If no specific hostname is provided, the file is used by default
    for all https targets. If a specific mirror is provided, it is
    used for the https entries in the sources.list file that use that
    repository (with the same name).

  Acquire::https[::repo.domain.tld]::CrlFile  "/path/to/all/crl.pem";

    Like previous knob but for passing the list of CRL files (in PEM
    format) to be used to verify revocation status. Again, if the
    option is defined with no specific mirror (probably makes little
    sense), this CRL information is used for all defined https entries
    in sources.list file. In a mirror specific context, it only applies
    to that mirror.

  Acquire::https[::repo.domain.tld]::IssuerCert "/path/to/issuer/cert.pem";

    Allows to constrain the issuer of the server certificate (for all
    https mirrors or a specific one) to a specific issuer. If the
    server certificate has not been issued by this certificate,
    connection fails.

  Acquire::https[::repo.domain.tld]::Verify-Peer "true";

    When authenticating the server, if the certificate verification fails
    for some reason (expired, revoked, man in the middle, lack of anchor,
    ...), the connection fails. This is obviously what you want in all
    cases and what the default value (true) of this option provides.

    If you know EXACTLY what you are doing, setting this option to "false"
    allow you to skip peer certificate verification and make the exchange
    succeed. Again, this option is for debugging or testing purpose only.
    It removes ALL the security provided by the use of SSL.TLS to secure
    the HTTP exchanges.

  Acquire::https[::repo.domain.tld]::Verify-Host "true";

    The certificate provided by the server during the TLS/SSL exchange
    provides the identity of the server which should match the DNS name
    used to access it. By default, as requested by RFC 2818, the name
    of the mirror is checked against the identity found in the
    certificate. This default behavior is safe and should not be
    changed. If you know that the server you are using has a DNS name
    which does not match the identity in its certificate, you can
    [report that issue to its administrator or] set the option to
    "false", which will prevent the comparison to be done.

    The options can be set globally or on a per-mirror basis. If set
    globally, the DNS name used is the one found in the sources.list
    file in the https URI.

  Acquire::https[::repo.domain.tld]::SslCert "/path/to/client/cert.pem";
  Acquire::https[::repo.domain.tld]::SslKey  "/path/to/client/key.pem";

    These two options provides support for client authentication using
    certificates. They respectively accept the X.509 client certificate
    in PEM format and the associated client key in PEM format (non
    encrypted form).

    The options can be set globally (which rarely makes sense) or on a
    per-mirror basis.

  Acquire::https[::repo.domain.tld]::SslForceVersion "TLSv1";

    This option can be use to select the version which will be proposed
    to the server. "SSLv3" and "TLSv1" are supported. SSLv2, which is
    considered insecure anyway is not supported (by gnutls, which is
    used by libcurl against which apt https method is linked).

    When the option is set to "SSLv3" to have apt propose SSLv3 (and
    associated sets of ciphersuites) instead of TLSv1 (the default)
    when performing the exchange. This prevents the server to select
    TLSv1 and use associated cipheruites. You should probably not use
    this option except if you know exactly what you are doing.

    Note that the default setting does not guarantee that the server
    will not select SSLv3 (for ciphersuites and SSL/TLS version as
    selectio is always done by the server, in the end). It only means
    that apt will not advertise TLS support.

  Debug::Acquire::https "true";

    This option can be used to show debug information. Because it is
    quite verbose, it is mainly useful to debug problems in case of
    failure to connect to a server for some reason. The default value
    is "false".

*/