-\section{\class{wxToolBarBase}}\label{wxtoolbarbase}
+\section{\class{wxToolBar}}\label{wxtoolbar}
-{\bf wxToolBarBase} is the base class for a number of toolbar classes. The most portable
-one of these is the generic \helpref{wxToolBarSimple}{wxtoolbarsimple} class. {\bf wxToolBarBase} defines
-automatic scrolling management functionality which is identical to \helpref{wxScrolledWindow}{wxscrolledwindow},
-so please refer to this class also.
+The name wxToolBar is defined to be a synonym for one of the following classes:
+
+\begin{itemize}\itemsep=0pt
+\item {\bf wxToolBar95} The native Windows 95 toolbar. Used on Windows 95, NT 4 and above.
+\item {\bf wxToolBarMSW} A Windows implementation. Used on 16-bit Windows.
+\item {\bf wxToolBarGTK} The GTK toolbar.
+\end{itemize}
\wxheading{Derived from}
+wxToolBarBase\\
\helpref{wxControl}{wxcontrol}\\
\helpref{wxWindow}{wxwindow}\\
\helpref{wxEvtHandler}{wxevthandler}\\
\helpref{wxObject}{wxobject}
+\wxheading{Include files}
+
+<wx/toolbar.h> (to allow wxWidgets to select an appropriate toolbar class)\\
+<wx/tbarbase.h> (the base class)
+
\wxheading{Remarks}
-Because there is a variety of toolbar classes, you may wish to choose which class
-is best for your application on each platform, and define {\bf wxToolBar} appropriately. For example:
+You may also create a toolbar that is managed by the frame, by
+calling \helpref{wxFrame::CreateToolBar}{wxframecreatetoolbar}. Under Pocket PC,
+you should \arg{always} use this function for creating the toolbar
+to be managed by the frame, so that wxWidgets can use a combined
+menubar and toolbar. Where you manage your own toolbars, create a wxToolBar
+as usual.
+
+The meaning of a "separator" is a vertical line under Windows and simple space under GTK+.
+
+{\bf wxToolBar95:} Note that this toolbar paints tools to reflect system-wide colours.
+If you use more than 16 colours in your tool bitmaps, you may wish to suppress
+this behaviour, otherwise system colours in your bitmaps will inadvertently be
+mapped to system colours. To do this, set the {\tt msw.remap} system option
+before creating the toolbar:
+
+\begin{verbatim}
+ wxSystemOptions::SetOption(wxT("msw.remap"), 0);
+\end{verbatim}
+
+If you wish to use 32-bit images (which include an alpha channel for transparency)
+use:
\begin{verbatim}
-#if WIN95
-class wxToolBar: public wxToolBar95
-#elif defined(wx_msw)
-class wxToolBar: public wxToolBarMSW
-#else
-class wxToolBar: public wxToolBarSimple
-#endif
-{
-};
+ wxSystemOptions::SetOption(wxT("msw.remap"), 2);
\end{verbatim}
-TODO: maybe change the confusing names: GetDefaultSize becomes GetToolBitmapSize, and
-GetDefaultButtonSize becomes GetToolSize. Document SetRows for wxToolBar95, and make it
-part of the base API?
+then colour remapping is switched off, and a transparent background used. But only
+use this option under Windows XP with true colour:
+
+\begin{verbatim}
+ (wxTheApp->GetComCtl32Version() >= 600 && ::wxDisplayDepth() >= 32)
+\end{verbatim}
+
+\wxheading{Window styles}
+
+\twocolwidtha{5cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{\windowstyle{wxTB\_FLAT}}{Gives the toolbar a flat look (Windows and GTK only).}
+\twocolitem{\windowstyle{wxTB\_DOCKABLE}}{Makes the toolbar floatable and dockable (GTK only).}
+\twocolitem{\windowstyle{wxTB\_HORIZONTAL}}{Specifies horizontal layout (default).}
+\twocolitem{\windowstyle{wxTB\_VERTICAL}}{Specifies vertical layout.}
+\twocolitem{\windowstyle{wxTB\_TEXT}}{Shows the text in the toolbar buttons; by default only icons are shown.}
+\twocolitem{\windowstyle{wxTB\_NOICONS}}{Specifies no icons in the toolbar buttons; by default they are shown.}
+\twocolitem{\windowstyle{wxTB\_NODIVIDER}}{Specifies no divider (border) above the toolbar (Windows only).}
+\twocolitem{\windowstyle{wxTB\_NOALIGN}}{Specifies no alignment with the parent window (Windows only, not very useful).}
+\twocolitem{\windowstyle{wxTB\_HORZ\_LAYOUT}}{Shows the text and the icons alongside, not vertically stacked (Windows and GTK
+2 only). This style must be used with wxTB\_TEXT.}
+\twocolitem{\windowstyle{wxTB\_HORZ\_TEXT}}{Combination of wxTB\_HORZ\_LAYOUT and wxTB\_TEXT.}
+\twocolitem{\windowstyle{wxTB\_NO\_TOOLTIPS}}{Don't show the short help tooltips for the tools when the mouse hovers over them.}
+\twocolitem{\windowstyle{wxTB\_BOTTOM}}{Align the toolbar at the bottom of parent window.}
+\twocolitem{\windowstyle{wxTB\_RIGHT}}{Align the toolbar at the right side of parent window.}
+\end{twocollist}
+
+See also \helpref{window styles overview}{windowstyles}. Note that the Win32
+native toolbar ignores {\tt wxTB\_NOICONS} style. Also, toggling the
+{\tt wxTB\_TEXT} works only if the style was initially on.
\wxheading{Event handling}
-Derive a new class from an existing toolbar class, and override appropriate virtual functions.
+The toolbar class emits menu commands in the same way that a frame menubar does,
+so you can use one EVT\_MENU macro for both a menu item and a toolbar button.
+The event handler functions take a wxCommandEvent argument. For most event macros,
+the identifier of the tool is passed, but for EVT\_TOOL\_ENTER the toolbar
+window identifier is passed and the tool identifier is retrieved from the wxCommandEvent.
+This is because the identifier may be -1 when the mouse moves off a tool, and -1 is not
+allowed as an identifier in the event system.
-TODO: make consistent with other event handling; have wxToolBarEvent and appropriate macros.
+\twocolwidtha{7cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf EVT\_TOOL(id, func)}}{Process a wxEVT\_COMMAND\_TOOL\_CLICKED event
+(a synonym for wxEVT\_COMMAND\_MENU\_SELECTED). Pass the id of the tool.}
+\twocolitem{{\bf EVT\_MENU(id, func)}}{The same as EVT\_TOOL.}
+\twocolitem{{\bf EVT\_TOOL\_RANGE(id1, id2, func)}}{Process a wxEVT\_COMMAND\_TOOL\_CLICKED event
+for a range of identifiers. Pass the ids of the tools.}
+\twocolitem{{\bf EVT\_MENU\_RANGE(id1, id2, func)}}{The same as EVT\_TOOL\_RANGE.}
+\twocolitem{{\bf EVT\_TOOL\_RCLICKED(id, func)}}{Process a wxEVT\_COMMAND\_TOOL\_RCLICKED event.
+Pass the id of the tool.}
+\twocolitem{{\bf EVT\_TOOL\_RCLICKED\_RANGE(id1, id2, func)}}{Process a wxEVT\_COMMAND\_TOOL\_RCLICKED event
+for a range of ids. Pass the ids of the tools.}
+\twocolitem{{\bf EVT\_TOOL\_ENTER(id, func)}}{Process a wxEVT\_COMMAND\_TOOL\_ENTER event.
+Pass the id of the toolbar itself. The value of wxCommandEvent::GetSelection is the tool id, or -1 if the mouse cursor has moved off a tool.}
+\twocolitem{{\bf EVT\_TOOL\_DROPDOWN(id, func)}}{Process a wxEVT\_COMMAND\_TOOL\_DROPDOWN\_CLICKED event. If unhandled, displays the default dropdown menu set using \helpref{wxToolBar::SetDropdownMenu}{wxtoolbarsetdropdownmenu}.}
+\end{twocollist}
+
+\wxheading{wxItemKind}
+
+There are several different types of tools you can add to a toolbar. These
+types are controlled by the wxItemKind enumeration which has the following
+values:
+\twocolwidtha{5cm}
+\begin{twocollist}\itemsep=0pt
+\twocolitem{{\bf wxITEM\_NORMAL}}{Normal tool button}
+\twocolitem{{\bf wxITEM\_CHECK}}{Check (or toggle) tool button.}
+\twocolitem{{\bf wxITEM\_NORMAL}}{Radio tool button. See \helpref{wxToolBar::AddRadioTool}{wxtoolbaraddradiotool} for details}
+\twocolitem{{\bf wxITEM\_DROPDOWN}}{Normal tool button with a dropdown arrow
+next to it. Clicking the dropdown arrow sends a wxEVT\_COMMAND\_TOOL\_DROPDOWN\_CLICKED
+event and may also display the menu previously associated with the item with
+\helpref{wxToolBar::SetDropdownMenu}{wxtoolbarsetdropdownmenu}. Currently this
+type of tools is supported under MSW and GTK.}
+\end{twocollist}
\wxheading{See also}
\overview{Toolbar overview}{wxtoolbaroverview},\rtfsp
-\helpref{wxToolBarSimple}{wxtoolbarsimple},\rtfsp
-\helpref{wxToolBarMSW}{wxtoolbarmsw},\rtfsp
-\helpref{wxToolBar95}{wxtoolbar95},\rtfsp
\helpref{wxScrolledWindow}{wxscrolledwindow}
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxToolBarBase::wxToolBarBase}\label{wxtoolbarbaseconstr}
-\func{}{wxToolBarBase}{\void}
+\membersection{wxToolBar::wxToolBar}\label{wxtoolbarconstr}
+
+\func{}{wxToolBar}{\void}
Default constructor.
-%\wxheading{See also}
-%
-%\helpref{wxToolBarBase::Create}{wxtoolbarbasecreate}
-%
-\membersection{wxToolBarBase::\destruct{wxToolBarBase}}
+\func{}{wxToolBar}{\param{wxWindow*}{ parent}, \param{wxWindowID }{id},
+ \param{const wxPoint\& }{pos = wxDefaultPosition},
+ \param{const wxSize\& }{size = wxDefaultSize},
+ \param{long }{style = wxTB\_HORIZONTAL \pipe wxNO\_BORDER},
+ \param{const wxString\& }{name = wxPanelNameStr}}
+
+Constructs a toolbar.
+
+\wxheading{Parameters}
+
+\docparam{parent}{Pointer to a parent window.}
+
+\docparam{id}{Window identifier. If -1, will automatically create an identifier.}
+
+\docparam{pos}{Window position. wxDefaultPosition is (-1, -1) which indicates that wxWidgets
+should generate a default position for the window. If using the wxWindow class directly, supply
+an actual position.}
+
+\docparam{size}{Window size. wxDefaultSize is (-1, -1) which indicates that wxWidgets
+should generate a default size for the window.}
+
+\docparam{style}{Window style. See \helpref{wxToolBar}{wxtoolbar} for details.}
-\func{void}{\destruct{wxToolBarBase}}{\void}
+\docparam{name}{Window name.}
+
+\wxheading{Remarks}
+
+After a toolbar is created, you use \helpref{wxToolBar::AddTool}{wxtoolbaraddtool} and
+perhaps \helpref{wxToolBar::AddSeparator}{wxtoolbaraddseparator}, and then you
+must call \helpref{wxToolBar::Realize}{wxtoolbarrealize} to construct and display the toolbar
+tools.
+
+You may also create a toolbar that is managed by the frame, by
+calling \helpref{wxFrame::CreateToolBar}{wxframecreatetoolbar}.
+
+
+\membersection{wxToolBar::\destruct{wxToolBar}}\label{wxtoolbardtor}
+
+\func{void}{\destruct{wxToolBar}}{\void}
Toolbar destructor.
-\membersection{wxToolBarBase::AddSeparator}\label{wxtoolbarbaseaddseparator}
+
+\membersection{wxToolBar::AddControl}\label{wxtoolbaraddcontrol}
+
+\func{bool}{AddControl}{\param{wxControl*}{ control}, \param{const wxString&}{ label = ""}}
+
+Adds any control to the toolbar, typically e.g. a combobox.
+
+\docparam{control}{The control to be added.}
+
+\docparam{label}{Text to be displayed near the control.}
+
+\wxheading{Remarks}
+
+wxMSW: the label is only displayed if there is enough space available below the embedded control.
+
+wxMac: labels are only displayed if wxWidgets is built with wxMAC\_USE\_NATIVE\_TOOLBAR set to 1
+
+
+\membersection{wxToolBar::AddSeparator}\label{wxtoolbaraddseparator}
\func{void}{AddSeparator}{\void}
\wxheading{See also}
-\helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool}, \helpref{wxToolBarBase::SetToolSeparation}{wxtoolbarbasesettoolseparation}
+\helpref{wxToolBar::AddTool}{wxtoolbaraddtool}, \helpref{wxToolBar::SetToolSeparation}{wxtoolbarsettoolseparation}
+
+
+\membersection{wxToolBar::AddTool}\label{wxtoolbaraddtool}
-\membersection{wxToolBarBase::AddTool}\label{wxtoolbarbaseaddtool}
+\func{wxToolBarToolBase*}{AddTool}{\param{int}{ toolId},\rtfsp
+\param{const wxString\&}{ label},\rtfsp
+\param{const wxBitmap\&}{ bitmap1},\rtfsp
+\param{const wxString\& }{shortHelpString = ""},\rtfsp
+\param{wxItemKind}{ kind = wxITEM\_NORMAL}}
-\func{wxToolBarBaseTool*}{AddTool}{\param{int}{ toolIndex}, \param{const wxBitmap\&}{ bitmap1},\rtfsp
-\param{const wxBitmap\&}{ bitmap2 = (wxBitmap *)NULL}, \param{const bool}{ isToggle = FALSE},\rtfsp
-\param{const float}{ xPos = -1}, \param{const float}{ yPos = -1},\rtfsp
-\param{wxObject *}{clientData = NULL}, \param{const wxString\& }{shortHelpString = ""}, \param{const wxString\& }{longHelpString = ""}}
+\func{wxToolBarToolBase*}{AddTool}{\param{int}{ toolId},\rtfsp
+\param{const wxString\&}{ label},\rtfsp
+\param{const wxBitmap\&}{ bitmap1},\rtfsp
+\param{const wxBitmap\&}{ bitmap2 = wxNullBitmap},\rtfsp
+\param{wxItemKind}{ kind = wxITEM\_NORMAL},\rtfsp
+\param{const wxString\& }{shortHelpString = ""},
+\param{const wxString\& }{longHelpString = ""},\rtfsp
+\param{wxObject* }{clientData = \NULL}}
-Adds a tool to the toolbar.
+\func{wxToolBarToolBase*}{AddTool}{\param{wxToolBarToolBase* }{tool}}
+
+Adds a tool to the toolbar. The first (short and most commonly used) version
+has fewer parameters than the full version at the price of not being able to
+specify some of the more rarely used button features. The last version allows
+you to add an existing tool.
\wxheading{Parameters}
-\docparam{toolIndex}{An integer by which
+\docparam{toolId}{An integer by which
the tool may be identified in subsequent operations.}
-\docparam{isToggle}{Specifies whether the tool is a toggle or not: a toggle tool may be in
-two states, whereas a non-toggle tool is just a button.}
+\docparam{kind}{May be wxITEM\_NORMAL for a normal button (default),
+wxITEM\_CHECK for a checkable tool (such tool stays pressed after it had been
+toggled) or wxITEM\_RADIO for a checkable tool which makes part of a radio
+group of tools each of which is automatically unchecked whenever another button
+in the group is checked}
-\docparam{bitmap1}{The primary tool bitmap for toggle and button tools.}
+\docparam{bitmap1}{The primary tool bitmap.}
-\docparam{bitmap2}{The second bitmap specifies the on-state bitmap for a toggle
-tool. If this is NULL, either an inverted version of the primary bitmap is
-used for the on-state of a toggle tool (monochrome displays) or a black
-border is drawn around the tool (colour displays). Note that to pass a NULL value,
-you need to cast it to (wxBitmap *) so that C++ can construct an appropriate temporary
-wxBitmap object.}
+\docparam{bitmap2}{The bitmap used when the tool is disabled. If it is equal to
+wxNullBitmap, the disabled bitmap is automatically generated by greing the
+normal one.}
-\docparam{xPos}{Specifies the x position of the tool if automatic layout is not suitable.}
+\docparam{shortHelpString}{This string is used for the tools tooltip}
-\docparam{yPos}{Specifies the y position of the tool if automatic layout is not suitable.}
+\docparam{longHelpString}{This string is shown in the statusbar (if any) of the
+parent frame when the mouse pointer is inside the tool}
\docparam{clientData}{An optional pointer to client data which can be
-retrieved later using \helpref{wxToolBarBase::GetToolClientData}{wxtoolbarbasegettoolclientdata}.}
+retrieved later using \helpref{wxToolBar::GetToolClientData}{wxtoolbargettoolclientdata}.}
-\docparam{shortHelpString}{Used for displaying a tooltip for the tool in the
-Windows 95 implementation of wxButtonBar. Pass the empty string if this is not required.}
+\docparam{tool}{The tool to be added.}
-\docparam{longHelpString}{Used to displayer longer help, such as status line help.
-Pass the empty string if this is not required.}
+\wxheading{Remarks}
+
+After you have added tools to a toolbar, you must call \helpref{wxToolBar::Realize}{wxtoolbarrealize} in
+order to have the tools appear.
\wxheading{See also}
-\helpref{wxToolBarBase::AddSeparator}{wxtoolbarbaseaddseparator}
+\helpref{wxToolBar::AddSeparator}{wxtoolbaraddseparator},\rtfsp
+\helpref{wxToolBar::AddCheckTool}{wxtoolbaraddchecktool},\rtfsp
+\helpref{wxToolBar::AddRadioTool}{wxtoolbaraddradiotool},\rtfsp
+\helpref{wxToolBar::InsertTool}{wxtoolbarinserttool},\rtfsp
+\helpref{wxToolBar::DeleteTool}{wxtoolbardeletetool},\rtfsp
+\helpref{wxToolBar::Realize}{wxtoolbarrealize}
-\membersection{wxToolBarBase::CreateTools}\label{wxtoolbarbasecreatetools}
-\func{bool}{CreateTools}{\void}
+\membersection{wxToolBar::AddCheckTool}\label{wxtoolbaraddchecktool}
-Call this function after all tools have been added to the toolbar, to actually
-create the tools.
+\func{wxToolBarToolBase*}{AddCheckTool}{\param{int}{ toolId},\rtfsp
+\param{const wxString\&}{ label},\rtfsp
+\param{const wxBitmap\&}{ bitmap1},\rtfsp
+\param{const wxBitmap\&}{ bitmap2},\rtfsp
+\param{const wxString\& }{shortHelpString = ""},\rtfsp
+\param{const wxString\& }{longHelpString = ""},\rtfsp
+\param{wxObject* }{clientData = \NULL}}
-\wxheading{Remarks}
+Adds a new check (or toggle) tool to the toolbar. The parameters are the same
+as in \helpref{wxToolBar::AddTool}{wxtoolbaraddtool}.
+
+\wxheading{See also}
-Strictly speaking, this is required only for the Windows 95 version of wxButtonBar,
-but for portability it should be called anyway.
+\helpref{wxToolBar::AddTool}{wxtoolbaraddtool}
+
+
+\membersection{wxToolBar::AddRadioTool}\label{wxtoolbaraddradiotool}
+
+\func{wxToolBarToolBase*}{AddRadioTool}{\param{int}{ toolId},\rtfsp
+\param{const wxString\&}{ label},\rtfsp
+\param{const wxBitmap\&}{ bitmap1},\rtfsp
+\param{const wxBitmap\&}{ bitmap2},\rtfsp
+\param{const wxString\& }{shortHelpString = ""},\rtfsp
+\param{const wxString\& }{longHelpString = ""},\rtfsp
+\param{wxObject* }{clientData = \NULL}}
+
+Adds a new radio tool to the toolbar. Consecutive radio tools form a radio
+group such that exactly one button in the group is pressed at any moment, in
+other words whenever a button in the group is pressed the previously pressed
+button is automatically released. You should avoid having the radio groups of
+only one element as it would be impossible for the user to use such button.
+
+By default, the first button in the radio group is initially pressed, the
+others are not.
\wxheading{See also}
-\helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool}
+\helpref{wxToolBar::AddTool}{wxtoolbaraddtool}
-\membersection{wxToolBarBase::DrawTool}\label{wxtoolbarbasedrawtool}
+\membersection{wxToolBar::ClearTools}\label{wxtoolbarcleartools}
-\func{void}{DrawTool}{\param{wxMemoryDC\& }{memDC}, \param{wxToolBarBaseTool* }{tool}}
+\func{void}{ClearTools}{\void}
-Draws the specified tool onto the window using the given memory device context.
+Deletes all the tools in the toolbar.
-\wxheading{Parameters}
+\membersection{wxToolBar::DeleteTool}\label{wxtoolbardeletetool}
-\docparam{memDC}{A memory DC to be used for drawing the tool.}
+\func{bool}{DeleteTool}{\param{int }{toolId}}
-\docparam{tool}{Tool to be drawn.}
+Removes the specified tool from the toolbar and deletes it. If you don't want
+to delete the tool, but just to remove it from the toolbar (to possibly add it
+back later), you may use \helpref{RemoveTool}{wxtoolbarremovetool} instead.
-\wxheading{Remarks}
+Note that it is unnecessary to call \helpref{Realize}{wxtoolbarrealize} for the
+change to take place, it will happen immediately.
+
+Returns true if the tool was deleted, false otherwise.
+
+\wxheading{See also}
+
+\helpref{DeleteToolByPos}{wxtoolbardeletetoolbypos}
+
+
+\membersection{wxToolBar::DeleteToolByPos}\label{wxtoolbardeletetoolbypos}
+
+\func{bool}{DeleteToolByPos}{\param{size\_t }{pos}}
-For internal use only.
+This function behaves like \helpref{DeleteTool}{wxtoolbardeletetool} but it
+deletes the tool at the specified position and not the one with the given id.
-\membersection{wxToolBarBase::EnableTool}\label{wxtoolbarbaseenabletool}
-\func{void}{EnableTool}{\param{int }{toolIndex}, \param{const bool}{ enable}}
+\membersection{wxToolBar::EnableTool}\label{wxtoolbarenabletool}
+
+\func{void}{EnableTool}{\param{int }{toolId}, \param{const bool}{ enable}}
Enables or disables the tool.
\wxheading{Parameters}
-\docparam{toolIndex}{Tool to enable or disable.}
+\docparam{toolId}{Tool to enable or disable.}
+
+\docparam{enable}{If true, enables the tool, otherwise disables it.}
-\docparam{enable}{If TRUE, enables the tool, otherwise disables it.}
+{\bf NB:} This function should only be called after
+\helpref{Realize}{wxtoolbarrealize}.
\wxheading{Remarks}
-For \helpref{wxToolBarSimple}{wxtoolbarsimple}, does nothing. Some other implementations
-will change the visible state of the tool to indicate that it is disabled.
+Some implementations will change the visible state of the tool to indicate that it is disabled.
\wxheading{See also}
-\helpref{wxToolBarBase::GetToolEnabled}{wxtoolbarbasegettoolenabled},\rtfsp
-%\helpref{wxToolBarBase::SetToolState}{wxtoolbarbasesettoolstate},\rtfsp
-\helpref{wxToolBarBase::ToggleTool}{wxtoolbarbasetoggletool}
+\helpref{wxToolBar::GetToolEnabled}{wxtoolbargettoolenabled},\rtfsp
+\helpref{wxToolBar::ToggleTool}{wxtoolbartoggletool}
+
+
+\membersection{wxToolBar::FindById}\label{wxtoolbarfindbyid}
-\membersection{wxToolBarBase::FindToolForPosition}\label{wxtoolbarbasefindtoolforposition}
+\func{wxToolBarToolBase*}{FindById}{\param{int }{id}}
-\constfunc{wxToolBarBaseTool*}{FindToolForPosition}{\param{const float}{ x}, \param{const float}{ y}}
+Returns a pointer to the tool identified by \arg{id} or
+\NULL if no corresponding tool is found.
+
+
+\membersection{wxToolBar::FindControl}\label{wxtoolbarfindcontrol}
+
+\func{wxControl*}{FindControl}{\param{int }{id}}
+
+Returns a pointer to the control identified by \arg{id} or
+\NULL if no corresponding control is found.
+
+
+\membersection{wxToolBar::FindToolForPosition}\label{wxtoolbarfindtoolforposition}
+
+\constfunc{wxToolBarToolBase*}{FindToolForPosition}{\param{wxCoord }{x}, \param{wxCoord }{y}}
Finds a tool for the given mouse position.
\wxheading{Return value}
-A pointer to a tool if a tool is found, or NULL otherwise.
+A pointer to a tool if a tool is found, or \NULL otherwise.
\wxheading{Remarks}
-Used internally, and should not need to be used by the programmer.
+Currently not implemented in wxGTK (always returns \NULL there).
+
+
+\membersection{wxToolBar::GetToolsCount}\label{wxtoolbargettoolscount}
-\membersection{wxToolBarBase::GetDefaultButtonSize}\label{wxtoolbarbasegetdefaultbuttonsize}
+\constfunc{int}{GetToolsCount}{\void}
-\func{wxSize}{GetDefaultButtonSize}{\void}
+Returns the number of tools in the toolbar.
+
+
+\membersection{wxToolBar::GetToolSize}\label{wxtoolbargettoolsize}
+
+\func{wxSize}{GetToolSize}{\void}
Returns the size of a whole button, which is usually larger than a tool bitmap because
of added 3D effects.
\wxheading{See also}
-\helpref{wxToolBarBase::SetDefaultSize}{wxtoolbarbasesetdefaultsize},\rtfsp
-\helpref{wxToolBarBase::GetDefaultSize}{wxtoolbarbasegetdefaultsize}
+\helpref{wxToolBar::SetToolBitmapSize}{wxtoolbarsettoolbitmapsize},\rtfsp
+\helpref{wxToolBar::GetToolBitmapSize}{wxtoolbargettoolbitmapsize}
-\membersection{wxToolBarBase::GetDefaultSize}\label{wxtoolbarbasegetdefaultsize}
-\func{wxSize}{GetDefaultSize}{\void}
+\membersection{wxToolBar::GetToolBitmapSize}\label{wxtoolbargettoolbitmapsize}
+
+\func{wxSize}{GetToolBitmapSize}{\void}
Returns the size of bitmap that the toolbar expects to have. The default bitmap size is 16 by 15 pixels.
\wxheading{Remarks}
-Note that this is the size of the bitmap you pass to \helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool},
+Note that this is the size of the bitmap you pass to \helpref{wxToolBar::AddTool}{wxtoolbaraddtool},
and not the eventual size of the tool button.
\wxheading{See also}
-\helpref{wxToolBarBase::SetDefaultSize}{wxtoolbarbasesetdefaultsize},\rtfsp
-\helpref{wxToolBarBase::GetDefaultButtonSize}{wxtoolbarbasegetdefaultbuttonsize}
+\helpref{wxToolBar::SetToolBitmapSize}{wxtoolbarsettoolbitmapsize},\rtfsp
+\helpref{wxToolBar::GetToolSize}{wxtoolbargettoolsize}
+
-\membersection{wxToolBarBase::GetMargins}\label{wxtoolbarbasegetmargins}
+\membersection{wxToolBar::GetMargins}\label{wxtoolbargetmargins}
\constfunc{wxSize}{GetMargins}{\void}
\wxheading{See also}
-\helpref{wxToolBarBase::SetMargins}{wxtoolbarbasesetmargins}
-
-\membersection{wxToolBarBase::GetMaxSize}\label{wxtoolbarbasegetmaxsize}
-
-\constfunc{void}{GetMaxSize}{\param{float*}{ w}, \param{float*}{ h}}
-
-Gets the maximum size taken up by the tools after layout, including margins.
-This can be used to size a frame around the toolbar window.
-
-\wxheading{Parameters}
-
-\docparam{w}{Receives the maximum horizontal size.}
+\helpref{wxToolBar::SetMargins}{wxtoolbarsetmargins}
-\docparam{h}{Receives the maximum vertical size.}
-\membersection{wxToolBarBase::GetToolClientData}\label{wxtoolbarbasegettoolclientdata}
+\membersection{wxToolBar::GetToolClientData}\label{wxtoolbargettoolclientdata}
-\constfunc{wxObject*}{GetToolClientData}{\param{int }{toolIndex}}
+\constfunc{wxObject*}{GetToolClientData}{\param{int }{toolId}}
Get any client data associated with the tool.
\wxheading{Parameters}
-\docparam{toolIndex}{Index of the tool, as passed to \helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool}.}
+\docparam{toolId}{Id of the tool, as passed to \helpref{wxToolBar::AddTool}{wxtoolbaraddtool}.}
\wxheading{Return value}
-Client data, or NULL if there is none.
+Client data, or \NULL if there is none.
+
-\membersection{wxToolBarBase::GetToolEnabled}\label{wxtoolbarbasegettoolenabled}
+\membersection{wxToolBar::GetToolEnabled}\label{wxtoolbargettoolenabled}
-\constfunc{bool}{GetToolEnabled}{\param{int }{toolIndex}}
+\constfunc{bool}{GetToolEnabled}{\param{int }{toolId}}
Called to determine whether a tool is enabled (responds to user input).
\wxheading{Parameters}
-\docparam{toolIndex}{Index of the tool in question.}
+\docparam{toolId}{Id of the tool in question.}
\wxheading{Return value}
-TRUE if the tool is enabled, FALSE otherwise.
+true if the tool is enabled, false otherwise.
+
+\wxheading{See also}
-%\wxheading{See also}
-%
-%\helpref{wxToolBarBase::SetToolEnabled}{wxtoolbarbasesettoolenabled}
-%
-\membersection{wxToolBarBase::GetToolLongHelp}\label{wxtoolbarbasegettoollonghelp}
+\helpref{wxToolBar::EnableTool}{wxtoolbarenabletool}
-\constfunc{wxString}{GetToolLongHelp}{\param{int }{toolIndex}}
+
+\membersection{wxToolBar::GetToolLongHelp}\label{wxtoolbargettoollonghelp}
+
+\constfunc{wxString}{GetToolLongHelp}{\param{int }{toolId}}
Returns the long help for the given tool.
\wxheading{Parameters}
-\docparam{toolIndex}{The tool in question.}
+\docparam{toolId}{The tool in question.}
\wxheading{See also}
-\helpref{wxToolBarBase::SetToolLongHelp}{wxtoolbarbasesettoollonghelp},\rtfsp
-\helpref{wxToolBarBase::SetToolShortHelp}{wxtoolbarbasesettoolshorthelp}\rtfsp
+\helpref{wxToolBar::SetToolLongHelp}{wxtoolbarsettoollonghelp},\rtfsp
+\helpref{wxToolBar::SetToolShortHelp}{wxtoolbarsettoolshorthelp}\rtfsp
-\membersection{wxToolBarBase::GetToolPacking}\label{wxtoolbarbasegettoolpacking}
+
+\membersection{wxToolBar::GetToolPacking}\label{wxtoolbargettoolpacking}
\constfunc{int}{GetToolPacking}{\void}
\wxheading{See also}
-\helpref{wxToolBarBase::SetToolPacking}{wxtoolbarbasesettoolpacking}
+\helpref{wxToolBar::SetToolPacking}{wxtoolbarsettoolpacking}
+
-\membersection{wxToolBarBase::GetToolSeparation}\label{wxtoolbarbasegettoolseparation}
+\membersection{wxToolBar::GetToolPos}\label{wxtoolbargettoolpos}
+
+\constfunc{int}{GetToolPos}{\param{int }{toolId}}
+
+Returns the tool position in the toolbar, or {\tt wxNOT\_FOUND} if the tool is not found.
+
+
+\membersection{wxToolBar::GetToolSeparation}\label{wxtoolbargettoolseparation}
\constfunc{int}{GetToolSeparation}{\void}
\wxheading{See also}
-\helpref{wxToolBarBase::SetToolSeparation}{wxtoolbarbasesettoolseparation}
+\helpref{wxToolBar::SetToolSeparation}{wxtoolbarsettoolseparation}
-\membersection{wxToolBarBase::GetToolShortHelp}\label{wxtoolbarbasegettoolshorthelp}
-\constfunc{wxString}{GetToolShortHelp}{\param{int }{toolIndex}}
+\membersection{wxToolBar::GetToolShortHelp}\label{wxtoolbargettoolshorthelp}
-Returns the short help for the given tool.
+\constfunc{wxString}{GetToolShortHelp}{\param{int }{toolId}}
-Returns the long help for the given tool.
+Returns the short help for the given tool.
\wxheading{Parameters}
-\docparam{toolIndex}{The tool in question.}
+\docparam{toolId}{The tool in question.}
\wxheading{See also}
-\helpref{wxToolBarBase::GetToolLongHelp}{wxtoolbarbasegettoollonghelp},\rtfsp
-\helpref{wxToolBarBase::SetToolShortHelp}{wxtoolbarbasesettoolshorthelp}\rtfsp
+\helpref{wxToolBar::GetToolLongHelp}{wxtoolbargettoollonghelp},\rtfsp
+\helpref{wxToolBar::SetToolShortHelp}{wxtoolbarsettoolshorthelp}\rtfsp
-\membersection{wxToolBarBase::GetToolState}\label{wxtoolbarbasegettoolstate}
-\constfunc{bool}{GetToolState}{\param{int }{toolIndex}}
+\membersection{wxToolBar::GetToolState}\label{wxtoolbargettoolstate}
+
+\constfunc{bool}{GetToolState}{\param{int }{toolId}}
Gets the on/off state of a toggle tool.
\wxheading{Parameters}
-\docparam{toolIndex}{The tool in question.}
+\docparam{toolId}{The tool in question.}
\wxheading{Return value}
-TRUE if the tool is toggled on, FALSE otherwise.
+true if the tool is toggled on, false otherwise.
+
+\wxheading{See also}
+
+\helpref{wxToolBar::ToggleTool}{wxtoolbartoggletool}
+
+
+\membersection{wxToolBar::InsertControl}\label{wxtoolbarinsertcontrol}
+
+\func{wxToolBarToolBase *}{InsertControl}{\param{size\_t }{pos}, \param{wxControl *}{control}}
+
+Inserts the control into the toolbar at the given position.
+
+You must call \helpref{Realize}{wxtoolbarrealize} for the change to take place.
+
+\wxheading{See also}
+
+\helpref{AddControl}{wxtoolbaraddcontrol},\\
+\helpref{InsertTool}{wxtoolbarinserttool}
+
+
+\membersection{wxToolBar::InsertSeparator}\label{wxtoolbarinsertseparator}
+
+\func{wxToolBarToolBase *}{InsertSeparator}{\param{size\_t }{pos}}
+
+Inserts the separator into the toolbar at the given position.
+
+You must call \helpref{Realize}{wxtoolbarrealize} for the change to take place.
+
+\wxheading{See also}
+
+\helpref{AddSeparator}{wxtoolbaraddseparator},\\
+\helpref{InsertTool}{wxtoolbarinserttool}
-%\wxheading{See also}
-%
-%\helpref{wxToolBarBase::SetToolState}{wxtoolbarbasesettoolstate}
-%
-\membersection{wxToolBarBase::Layout}\label{wxtoolbarbaselayout}
-\func{void}{Layout}{\void}
+\membersection{wxToolBar::InsertTool}\label{wxtoolbarinserttool}
-Called by the application after the tools have been added to
-automatically lay the tools out on the window. If you have given
-absolute positions when adding the tools, do not call this.
+\func{wxToolBarToolBase *}{InsertTool}{\param{size\_t }{pos},\rtfsp
+\param{int}{ toolId}, \param{const wxBitmap\&}{ bitmap1},\rtfsp
+\param{const wxBitmap\&}{ bitmap2 = wxNullBitmap}, \param{bool}{ isToggle = false},\rtfsp
+\param{wxObject* }{clientData = \NULL}, \param{const wxString\& }{shortHelpString = ""}, \param{const wxString\& }{longHelpString = ""}}
-\membersection{wxToolBarBase::OnLeftClick}\label{wxtoolbarbaseonleftclick}
+\func{wxToolBarToolBase *}{InsertTool}{\param{size\_t }{pos},\rtfsp
+\param{wxToolBarToolBase* }{tool}}
-\func{bool}{OnLeftClick}{\param{int}{ toolIndex}, \param{bool}{ toggleDown}}
+Inserts the tool with the specified attributes into the toolbar at the given
+position.
-Called when the user clicks on a tool with the left mouse button. The
-programmer should override this function to detect left tool clicks.
+You must call \helpref{Realize}{wxtoolbarrealize} for the change to take place.
+
+\wxheading{See also}
+
+\helpref{AddTool}{wxtoolbaraddtool},\\
+\helpref{InsertControl}{wxtoolbarinsertcontrol},\\
+\helpref{InsertSeparator}{wxtoolbarinsertseparator}
+
+
+\membersection{wxToolBar::OnLeftClick}\label{wxtoolbaronleftclick}
+
+\func{bool}{OnLeftClick}{\param{int}{ toolId}, \param{bool}{ toggleDown}}
+
+Called when the user clicks on a tool with the left mouse button.
+
+This is the old way of detecting tool clicks; although it will still work,
+you should use the EVT\_MENU or EVT\_TOOL macro instead.
\wxheading{Parameters}
-\docparam{toolIndex}{The identifier passed to \helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool}.}
+\docparam{toolId}{The identifier passed to \helpref{wxToolBar::AddTool}{wxtoolbaraddtool}.}
-\docparam{toggleDown}{TRUE if the tool is a toggle and the toggle is down, otherwise is FALSE.}
+\docparam{toggleDown}{true if the tool is a toggle and the toggle is down, otherwise is false.}
\wxheading{Return value}
-If the tool is a toggle and this function returns FALSE, the toggle
+If the tool is a toggle and this function returns false, the toggle
toggle state (internal and visual) will not be changed. This provides a way of
specifying that toggle operations are not permitted in some circumstances.
\wxheading{See also}
-\helpref{wxToolBarBase::OnMouseEnter}{wxtoolbarbaseonmouseenter},\rtfsp
-\helpref{wxToolBarBase::OnRightClick}{wxtoolbarbaseonrightclick}
+\helpref{wxToolBar::OnMouseEnter}{wxtoolbaronmouseenter},\rtfsp
+\helpref{wxToolBar::OnRightClick}{wxtoolbaronrightclick}
+
-\membersection{wxToolBarBase::OnMouseEnter}\label{wxtoolbarbaseonmouseenter}
+\membersection{wxToolBar::OnMouseEnter}\label{wxtoolbaronmouseenter}
-\func{void}{OnMouseEnter}{\param{int}{ toolIndex}}
+\func{void}{OnMouseEnter}{\param{int}{ toolId}}
This is called when the mouse cursor moves into a tool or out of
the toolbar.
+This is the old way of detecting mouse enter events; although it will still work,
+you should use the EVT\_TOOL\_ENTER macro instead.
+
\wxheading{Parameters}
-\docparam{toolIndex}{Greater than -1 if the mouse cursor has moved into the tool,
+\docparam{toolId}{Greater than -1 if the mouse cursor has moved into the tool,
or -1 if the mouse cursor has moved. The
programmer can override this to provide extra information about the tool,
such as a short description on the status line.}
\wxheading{Remarks}
-With some derived toolbar classes, if the mouse moves quickly out of the toolbar, wxWindows may not be able to
+With some derived toolbar classes, if the mouse moves quickly out of the toolbar, wxWidgets may not be able to
detect it. Therefore this function may not always be called when expected.
-\membersection{wxToolBarBase::OnRightClick}\label{wxtoolbarbaseonrightclick}
-\func{void}{OnRightClick}{\param{int}{ toolIndex}, \param{float}{ x}, \param{float}{ y}}
+\membersection{wxToolBar::OnRightClick}\label{wxtoolbaronrightclick}
+
+\func{void}{OnRightClick}{\param{int}{ toolId}, \param{float}{ x}, \param{float}{ y}}
Called when the user clicks on a tool with the right mouse button. The
programmer should override this function to detect right tool clicks.
+This is the old way of detecting tool right clicks; although it will still work,
+you should use the EVT\_TOOL\_RCLICKED macro instead.
+
\wxheading{Parameters}
-\docparam{toolIndex}{The identifier passed to \helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool}.}
+\docparam{toolId}{The identifier passed to \helpref{wxToolBar::AddTool}{wxtoolbaraddtool}.}
\docparam{x}{The x position of the mouse cursor.}
\wxheading{See also}
-\helpref{wxToolBarBase::OnMouseEnter}{wxtoolbarbaseonmouseenter},\rtfsp
-\helpref{wxToolBarBase::OnLeftClick}{wxtoolbarbaseonleftclick}
+\helpref{wxToolBar::OnMouseEnter}{wxtoolbaronmouseenter},\rtfsp
+\helpref{wxToolBar::OnLeftClick}{wxtoolbaronleftclick}
-\membersection{wxToolBarBase::SetDefaultSize}\label{wxtoolbarbasesetdefaultsize}
-\func{void}{SetDefaultSize}{\param{const wxSize\&}{ size}}
+\membersection{wxToolBar::Realize}\label{wxtoolbarrealize}
-Sets the default size of each tool bitmap. The default bitmap size is 16 by 15 pixels.
+\func{bool}{Realize}{\void}
-\wxheading{Parameters}
+This function should be called after you have added tools.
-\docparam{size}{The size of the bitmaps in the toolbar.}
-\wxheading{Remarks}
+\membersection{wxToolBar::RemoveTool}\label{wxtoolbarremovetool}
-This should be called to tell the toolbar what the tool bitmap size is. Call
-it before you add tools.
+\func{wxToolBarToolBase *}{RemoveTool}{\param{int }{id}}
-Note that this is the size of the bitmap you pass to \helpref{wxToolBarBase::AddTool}{wxtoolbarbaseaddtool},
-and not the eventual size of the tool button.
+Removes the given tool from the toolbar but doesn't delete it. This allows to
+insert/add this tool back to this (or another) toolbar later.
+
+Note that it is unnecessary to call \helpref{Realize}{wxtoolbarrealize} for the
+change to take place, it will happen immediately.
\wxheading{See also}
-\helpref{wxToolBarBase::GetDefaultSize}{wxtoolbarbasegetdefaultsize},\rtfsp
-\helpref{wxToolBarBase::GetDefaultButtonSize}{wxtoolbarbasegetdefaultbuttonsize}
+\helpref{DeleteTool}{wxtoolbardeletetool}
+
+
+\membersection{wxToolBar::SetBitmapResource}\label{wxtoolbarsetbitmapresource}
+
+\func{void}{SetBitmapResource}{\param{int }{resourceId}}
-\membersection{wxToolBarBase::SetMargins}\label{wxtoolbarbasesetmargins}
+Sets the bitmap resource identifier for specifying tool bitmaps as indices
+into a custom bitmap. Windows CE only.
+
+
+\membersection{wxToolBar::SetMargins}\label{wxtoolbarsetmargins}
\func{void}{SetMargins}{\param{const wxSize\&}{ size}}
\wxheading{See also}
-\helpref{wxToolBarBase::GetMargins}{wxtoolbarbasegetmargins}, \helpref{wxSize}{wxsize}
-
-\membersection{wxToolBarBase::SetToolLongHelp}\label{wxtoolbarbasesettoollonghelp}
-
-\func{void}{SetToolLongHelp}{\param{int }{toolIndex}, \param{const wxString\& }{helpString}}
+\helpref{wxToolBar::GetMargins}{wxtoolbargetmargins}, \helpref{wxSize}{wxsize}
-Sets the long help for the given tool.
-\wxheading{Parameters}
+\membersection{wxToolBar::SetDropdownMenu}\label{wxtoolbarsetdropdownmenu}
-\docparam{toolIndex}{The tool in question.}
+\func{bool}{SetDropdownMenu}{\param{int }{id}, \param{wxMenu* }{menu}}
-\docparam{helpString}{A string for the long help.}
+Sets the dropdown menu for the tool given by its \arg{id}. The tool itself will
+delete the menu when it's no longer needed.
-\wxheading{Remarks}
+If you define a EVT\_TOOL\_DROPDOWN handler in your program, you must call
+\helpref{wxEvent::Skip()}{wxeventskip} from it or the menu won't be displayed.
-You might use the long help for displaying the tool purpose on the status line.
-\wxheading{See also}
-
-\helpref{wxToolBarBase::GetToolLongHelp}{wxtoolbarbasegettoollonghelp},\rtfsp
-\helpref{wxToolBarBase::SetToolShortHelp}{wxtoolbarbasesettoolshorthelp},\rtfsp
+\membersection{wxToolBar::SetToolBitmapSize}\label{wxtoolbarsettoolbitmapsize}
-\membersection{wxToolBarBase::SetToolPacking}\label{wxtoolbarbasesettoolpacking}
-
-\func{void}{SetToolPacking}{\param{int}{ packing}}
+\func{void}{SetToolBitmapSize}{\param{const wxSize\&}{ size}}
-Sets the value used for spacing tools. The default value is 1.
+Sets the default size of each tool bitmap. The default bitmap size is 16 by 15 pixels.
\wxheading{Parameters}
-\docparam{packing}{The value for packing.}
+\docparam{size}{The size of the bitmaps in the toolbar.}
\wxheading{Remarks}
-The packing is used for spacing in the vertical direction if the toolbar is horizontal,
-and for spacing in the horizontal direction if the toolbar is vertical.
-
-\wxheading{See also}
-
-\helpref{wxToolBarBase::GetToolPacking}{wxtoolbarbasegettoolpacking}
-
-\membersection{wxToolBarBase::SetToolShortHelp}\label{wxtoolbarbasesettoolshorthelp}
-
-\func{void}{SetToolShortHelp}{\param{int }{toolIndex}, \param{const wxString\& }{helpString}}
-
-Sets the short help for the given tool.
-
-\wxheading{Parameters}
-
-\docparam{toolIndex}{The tool in question.}
+This should be called to tell the toolbar what the tool bitmap size is. Call
+it before you add tools.
-\docparam{helpString}{The string for the short help.}
+Note that this is the size of the bitmap you pass to \helpref{wxToolBar::AddTool}{wxtoolbaraddtool},
+and not the eventual size of the tool button.
-\wxheading{Remarks}
+\wxheading{See also}
-An application might use short help for identifying the tool purpose in a tooltip.
+\helpref{wxToolBar::GetToolBitmapSize}{wxtoolbargettoolbitmapsize},\rtfsp
+\helpref{wxToolBar::GetToolSize}{wxtoolbargettoolsize}
-\wxheading{See also}
-\helpref{wxToolBarBase::GetToolShortHelp}{wxtoolbarbasegettoolshorthelp}, \helpref{wxToolBarBase::SetToolLongHelp}{wxtoolbarbasesettoollonghelp}
+\membersection{wxToolBar::SetToolClientData}\label{wxtoolbarsettoolclientdata}
-\membersection{wxToolBarBase::SetToolSeparation}\label{wxtoolbarbasesettoolseparation}
+\func{void}{SetToolClientData}{\param{int }{id}, \param{wxObject* }{clientData}}
-\func{void}{SetToolSeparation}{\param{int}{ separation}}
+Sets the client data associated with the tool.
-Sets the default separator size. The default value is 5.
-\wxheading{Parameters}
+\membersection{wxToolBar::SetToolDisabledBitmap}\label{wxtoolbarsettooldisabledbitmap}
-\docparam{separation}{The separator size.}
+\func{void}{SetToolDisabledBitmap}{\param{int }{id}, \param{const wxBitmap\& }{bitmap}}
-\wxheading{See also}
+Sets the bitmap to be used by the tool with the given ID when the tool
+is in a disabled state. This can only be used on Button tools, not
+controls. NOTE: The native toolbar classes on the main platforms all
+synthesize the disabled bitmap from the normal bitmap, so this
+function will have no effect on those platforms.
-\helpref{wxToolBarBase::AddSeparator}{wxtoolbarbaseaddseparator}
-\membersection{wxToolBarBase::ToggleTool}\label{wxtoolbarbasetoggletool}
+\membersection{wxToolBar::SetToolLongHelp}\label{wxtoolbarsettoollonghelp}
-\func{void}{ToggleTool}{\param{int }{toolIndex}, \param{const bool}{ toggle}}
+\func{void}{SetToolLongHelp}{\param{int }{toolId}, \param{const wxString\& }{helpString}}
-Toggles a tool on or off.
+Sets the long help for the given tool.
\wxheading{Parameters}
-\docparam{toolIndex}{Tool in question.}
+\docparam{toolId}{The tool in question.}
-\docparam{toggle}{If TRUE, toggles the tool on, otherwise toggles it off.}
+\docparam{helpString}{A string for the long help.}
\wxheading{Remarks}
-Only applies to a tool that has been specified as a toggle tool.
+You might use the long help for displaying the tool purpose on the status line.
\wxheading{See also}
-\helpref{wxToolBarBase::GetToolState}{wxtoolbarbasegettoolstate}
-
-\section{\class{wxToolBar95}}\label{wxtoolbar95}
+\helpref{wxToolBar::GetToolLongHelp}{wxtoolbargettoollonghelp},\rtfsp
+\helpref{wxToolBar::SetToolShortHelp}{wxtoolbarsettoolshorthelp},\rtfsp
-This class should be used when a 3D-effect toolbar is required under Windows 95.
-It uses the native toolbar control.
-\wxheading{Derived from}
+\membersection{wxToolBar::SetToolPacking}\label{wxtoolbarsettoolpacking}
-\helpref{wxToolBarBase}{wxtoolbarbase}\\
-\helpref{wxControl}{wxcontrol}\\
-\helpref{wxWindow}{wxwindow}\\
-\helpref{wxEvtHandler}{wxevthandler}\\
-\helpref{wxObject}{wxobject}
+\func{void}{SetToolPacking}{\param{int}{ packing}}
-\wxheading{Window styles}
+Sets the value used for spacing tools. The default value is 1.
-There are no specific styles for this class.
+\wxheading{Parameters}
-See also \helpref{window styles overview}{windowstyles}.
+\docparam{packing}{The value for packing.}
\wxheading{Remarks}
-Note that this toolbar paints tools to reflect user-selected colours.
-The toolbar orientation must always be {\bf wxVERTICAL}.
-
-For member functions, see the documentation for \helpref{wxToolBarBase}{wxtoolbarbase}.
+The packing is used for spacing in the vertical direction if the toolbar is horizontal,
+and for spacing in the horizontal direction if the toolbar is vertical.
\wxheading{See also}
-\overview{Toolbar overview}{wxtoolbaroverview},\rtfsp
-\helpref{wxToolBarBase}{wxtoolbarbase},\rtfsp
-\helpref{wxToolBarSimple}{wxtoolbarsimple},\rtfsp
-\helpref{wxToolBarMSW}{wxtoolbarmsw}
+\helpref{wxToolBar::GetToolPacking}{wxtoolbargettoolpacking}
-\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxToolBar95::wxToolBar95}\label{wxtoolbar95constr}
+\membersection{wxToolBar::SetToolShortHelp}\label{wxtoolbarsettoolshorthelp}
-\func{}{wxToolBar95}{\param{wxWindow*}{ parent}, \param{wxWindowID }{id},\rtfsp
-\param{const wxPoint\& }{pos = wxDefaultPosition}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
-\param{long }{style = 0}, \param{int }{orientation = wxVERTICAL},\rtfsp
-\param{int }{nRowsOrColumns = 1}, \param{const wxString\& }{name = ``toolBar"}}
+\func{void}{SetToolShortHelp}{\param{int }{toolId}, \param{const wxString\& }{helpString}}
-Constructs a toolbar.
+Sets the short help for the given tool.
\wxheading{Parameters}
-\docparam{parent}{Parent window. Must not be NULL.}
-
-\docparam{id}{Window identifier. A value of -1 indicates a default value.}
-
-\docparam{pos}{Window position. If the position (-1, -1) is specified then a default position is chosen.}
-
-\docparam{size}{Window size. If the default size (-1, -1) is specified then a default size is chosen.}
-
-\docparam{orientation}{Specifies a wxVERTICAL or wxHORIZONTAL orientation for laying out
-the toolbar.}
-
-\docparam{nRowsOrColumns}{Specifies the number of rows or
-columns, whose meaning depends on {\it orientation}. If laid out
-vertically, {\it nRowsOrColumns} specifies the number of rows to draw
-before the next column is started; if horizontal, it refers to the
-number of columns to draw before the next row is started.}
-
-\docparam{style}{Window style. See \helpref{wxToolBar95}{wxtoolbar95}.}
-
-\docparam{name}{Window name.}
-
-\section{\class{wxToolBarMSW}}\label{wxtoolbarmsw}
-
-This class should be used when a 3D-effect toolbar is required for Windows versions earlier
-than Windows 95.
-
-\wxheading{Derived from}
-
-\helpref{wxToolBarBase}{wxtoolbarbase}\\
-\helpref{wxControl}{wxcontrol}\\
-\helpref{wxWindow}{wxwindow}\\
-\helpref{wxEvtHandler}{wxevthandler}\\
-\helpref{wxObject}{wxobject}
+\docparam{toolId}{The tool in question.}
-\wxheading{Window styles}
-
-There are no specific styles for this class.
-
-See also \helpref{window styles overview}{windowstyles}.
+\docparam{helpString}{The string for the short help.}
\wxheading{Remarks}
-Note that this toolbar does not paint tools to reflect user-selected colours: grey shading is used.
-
-For member functions, see the documentation for \helpref{wxToolBarBase}{wxtoolbarbase}.
+An application might use short help for identifying the tool purpose in a tooltip.
\wxheading{See also}
-\overview{Toolbar overview}{wxtoolbaroverview},\rtfsp
-\helpref{wxToolBarBase}{wxtoolbarbase},\rtfsp
-\helpref{wxToolBarSimple}{wxtoolbarsimple},\rtfsp
-\helpref{wxToolBar95}{wxtoolbar95}
-
-\latexignore{\rtfignore{\wxheading{Members}}}
-
-\membersection{wxToolBarMSW::wxToolBarMSW}\label{wxtoolbarmswconstr}
-
-\func{}{wxToolBarMSW}{\param{wxWindow*}{ parent}, \param{wxWindowID }{id},\rtfsp
-\param{const wxPoint\& }{pos = wxDefaultPosition}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
-\param{long }{style = 0}, \param{int }{orientation = wxVERTICAL},\rtfsp
-\param{int }{nRowsOrColumns = 1}, \param{const wxString\& }{name = ``toolBar"}}
-
-Constructs a toolbar.
-
-\wxheading{Parameters}
-
-\docparam{parent}{Parent window. Must not be NULL.}
-
-\docparam{id}{Window identifier. A value of -1 indicates a default value.}
-
-\docparam{pos}{Window position. If the position (-1, -1) is specified then a default position is chosen.}
-
-\docparam{size}{Window size. If the default size (-1, -1) is specified then a default size is chosen.}
-
-\docparam{orientation}{Specifies a wxVERTICAL or wxHORIZONTAL orientation for laying out
-the toolbar.}
-
-\docparam{nRowsOrColumns}{Specifies the number of rows or
-columns, whose meaning depends on {\it orientation}. If laid out
-vertically, {\it nRowsOrColumns} specifies the number of rows to draw
-before the next column is started; if horizontal, it refers to the
-number of columns to draw before the next row is started.}
-
-\docparam{style}{Window style. See \helpref{wxToolBarMSW}{wxtoolbarmsw}.}
+\helpref{wxToolBar::GetToolShortHelp}{wxtoolbargettoolshorthelp}, \helpref{wxToolBar::SetToolLongHelp}{wxtoolbarsettoollonghelp}
-\docparam{name}{Window name.}
+\membersection{wxToolBar::SetToolNormalBitmap}\label{wxtoolbarsettoolnormalbitmap}
-\section{\class{wxToolBarSimple}}\label{wxtoolbarsimple}
+\func{void}{SetToolNormalBitmap}{\param{int }{id}, \param{const wxBitmap\& }{bitmap}}
-This is the generic toolbar class which has an identical appearance
-on all platforms.
+Sets the bitmap to be used by the tool with the given ID. This can
+only be used on Button tools, not controls.
-\wxheading{Derived from}
-\helpref{wxToolBarBase}{wxtoolbarbase}\\
-\helpref{wxControl}{wxcontrol}\\
-\helpref{wxWindow}{wxwindow}\\
-\helpref{wxEvtHandler}{wxevthandler}\\
-\helpref{wxObject}{wxobject}
-
-\wxheading{Window styles}
-\twocolwidtha{5cm}
-\begin{twocollist}\itemsep=0pt
-\twocolitem{\windowstyle{wxTB\_3DBUTTONS}}{Gives the simple toolbar a mild 3D look to its buttons.}
-\end{twocollist}
+\membersection{wxToolBar::SetToolSeparation}\label{wxtoolbarsettoolseparation}
-See also \helpref{window styles overview}{windowstyles}.
+\func{void}{SetToolSeparation}{\param{int}{ separation}}
-\wxheading{Remarks}
+Sets the default separator size. The default value is 5.
-In this class, disabling a toolbar tool does not change its appearance.
+\wxheading{Parameters}
-For member functions, see the documentation for \helpref{wxToolBarBase}{wxtoolbarbase}.
+\docparam{separation}{The separator size.}
\wxheading{See also}
-\overview{Toolbar overview}{wxtoolbaroverview},\rtfsp
-\helpref{wxToolBarBase}{wxtoolbarbase},\rtfsp
-\helpref{wxToolBarSimple}{wxtoolbarsimple},\rtfsp
-\helpref{wxToolBar95}{wxtoolbar95}
+\helpref{wxToolBar::AddSeparator}{wxtoolbaraddseparator}
-\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxToolBarSimple::wxToolBarSimple}\label{wxtoolbarsimpleconstr}
+\membersection{wxToolBar::ToggleTool}\label{wxtoolbartoggletool}
-\func{}{wxToolBarSimple}{\param{wxWindow*}{ parent}, \param{wxWindowID }{id},\rtfsp
-\param{const wxPoint\& }{pos = wxDefaultPosition}, \param{const wxSize\& }{size = wxDefaultSize},\rtfsp
-\param{long }{style = 0}, \param{int }{orientation = wxVERTICAL},\rtfsp
-\param{int }{nRowsOrColumns = 1}, \param{const wxString\& }{name = ``toolBar"}}
+\func{void}{ToggleTool}{\param{int }{toolId}, \param{const bool}{ toggle}}
-Constructs a toolbar.
+Toggles a tool on or off. This does not cause any event to get emitted.
\wxheading{Parameters}
-\docparam{parent}{Parent window. Must not be NULL.}
-
-\docparam{id}{Window identifier. A value of -1 indicates a default value.}
-
-\docparam{pos}{Window position. If the position (-1, -1) is specified then a default position is chosen.}
-
-\docparam{size}{Window size. If the default size (-1, -1) is specified then a default size is chosen.}
-
-\docparam{orientation}{Specifies a wxVERTICAL or wxHORIZONTAL orientation for laying out
-the toolbar.}
+\docparam{toolId}{Tool in question.}
-\docparam{nRowsOrColumns}{Specifies the number of rows or
-columns, whose meaning depends on {\it orientation}. If laid out
-vertically, {\it nRowsOrColumns} specifies the number of rows to draw
-before the next column is started; if horizontal, it refers to the
-number of columns to draw before the next row is started.}
+\docparam{toggle}{If true, toggles the tool on, otherwise toggles it off.}
-\docparam{style}{Window style. See \helpref{wxToolBarSimple}{wxtoolbarsimple}.}
+\wxheading{Remarks}
-\docparam{name}{Window name.}
+Only applies to a tool that has been specified as a toggle tool.
+\wxheading{See also}
+\helpref{wxToolBar::GetToolState}{wxtoolbargettoolstate}
projects / wxWidgets.git / blobdiff