Add test for absence of events from wxSpinCtrlDouble ctor.

[wxWidgets.git] / interface / wx / dataview.h

diff --git a/interface/wx/dataview.h b/interface/wx/dataview.h
index 0cf1b03ab88da13b816e9d6aeaefb9ad5fc2bb0d..81bcd5adfdec70dcd349bf110dd86e5e0cc70426 100644 (file)
--- a/interface/wx/dataview.h
+++ b/interface/wx/dataview.h
@@ -2,8 +2,7 @@
 // Name:        dataview.h
 // Purpose:     interface of wxDataView* classes
 // Author:      wxWidgets team
 // Name:        dataview.h
 // Purpose:     interface of wxDataView* classes
 // Author:      wxWidgets team

-// RCS-ID:      $Id$
-// Licence:     wxWindows license
+// Licence:     wxWindows licence

 /////////////////////////////////////////////////////////////////////////////
 
 
 /////////////////////////////////////////////////////////////////////////////
 
 


@@ -20,17 +19,26 @@
     wxDataViewModel::GetValue in order to define the data model which acts as an
     interface between your actual data and the wxDataViewCtrl.
 
     wxDataViewModel::GetValue in order to define the data model which acts as an
     interface between your actual data and the wxDataViewCtrl.
 

-    Since you will usually also allow the wxDataViewCtrl to change your data
-    through its graphical interface, you will also have to override
-    wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
-    to some data has been committed.
+    Note that wxDataViewModel does not define the position or index of any item
+    in the control because different controls might display the same data differently.
+    wxDataViewModel does provide a wxDataViewModel::Compare method which the
+    wxDataViewCtrl may use to sort the data either in conjunction with a column
+    header or without (see wxDataViewModel::HasDefaultCompare).

 
     wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant
     to store data and its type in a generic way. wxVariant can be extended to contain
 
     wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant
     to store data and its type in a generic way. wxVariant can be extended to contain

-    almost any data without changes to the original class.
+    almost any data without changes to the original class. To a certain extent,
+    you can use (the somewhat more elegant) wxAny instead of wxVariant as there
+    is code to convert between the two, but it is unclear what impact this will
+    have on performance.

 
 

-    The data that is presented through this data model is expected to change at
-    run-time. You need to inform the data model when a change happened.
+    Since you will usually allow the wxDataViewCtrl to change your data
+    through its graphical interface, you will also have to override
+    wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
+    to some data has been committed.
+
+    If the data represented by the model is changed by something else than its
+    associated wxDataViewCtrl, the control has to be notified about the change.

     Depending on what happened you need to call one of the following methods:
     - wxDataViewModel::ValueChanged,
     - wxDataViewModel::ItemAdded,
     Depending on what happened you need to call one of the following methods:
     - wxDataViewModel::ValueChanged,
     - wxDataViewModel::ItemAdded,


@@ -44,12 +52,6 @@
     - wxDataViewModel::ItemsDeleted,
     - wxDataViewModel::ItemsChanged.
 
     - wxDataViewModel::ItemsDeleted,
     - wxDataViewModel::ItemsChanged.
 

-    Note that wxDataViewModel does not define the position or index of any item
-    in the control because different controls might display the same data differently.
-    wxDataViewModel does provide a wxDataViewModel::Compare method which the
-    wxDataViewCtrl may use to sort the data either in conjunction with a column
-    header or without (see wxDataViewModel::HasDefaultCompare).
-

     This class maintains a list of wxDataViewModelNotifier which link this class
     to the specific implementations on the supported platforms so that e.g. calling
     wxDataViewModel::ValueChanged on this model will just call
     This class maintains a list of wxDataViewModelNotifier which link this class
     to the specific implementations on the supported platforms so that e.g. calling
     wxDataViewModel::ValueChanged on this model will just call


@@ -75,6 +77,19 @@
         // add columns now
     @endcode
 
         // add columns now
     @endcode
 

+    A potentially better way to avoid memory leaks is to use wxObjectDataPtr
+    
+    @code
+        wxObjectDataPtr<MyMusicModel> musicModel;
+        
+        wxDataViewCtrl *musicCtrl = new wxDataViewCtrl( this, wxID_ANY );
+        musicModel = new MyMusicModel;
+        m_musicCtrl->AssociateModel( musicModel.get() );
+
+        // add columns now
+    @endcode
+
+

     @library{wxadv}
     @category{dvc}
 */
     @library{wxadv}
     @category{dvc}
 */


@@ -100,7 +115,7 @@ public:
 
         @since 2.9.1
 
 
         @since 2.9.1
 

-        @param variable
+        @param variant

             The new value.
         @param item
             The item (row) to update.
             The new value.
         @param item
             The item (row) to update.


@@ -151,6 +166,30 @@ public:
     virtual bool GetAttr(const wxDataViewItem& item, unsigned int col,
                          wxDataViewItemAttr& attr) const;
 
     virtual bool GetAttr(const wxDataViewItem& item, unsigned int col,
                          wxDataViewItemAttr& attr) const;
 

+    /**
+        Override this to indicate that the item should be disabled.
+
+        Disabled items are displayed differently (e.g. grayed out) and cannot
+        be interacted with.
+
+        The base class version always returns @true, thus making all items
+        enabled by default.
+
+        @param item
+            The item whose enabled status is requested.
+        @param col
+            The column of the item whose enabled status is requested.
+        @return
+            @true if this item should be enabled, @false otherwise.
+
+        @note Currently disabling items is not supported by the wxOSX/Carbon
+              implementation.
+
+        @since 2.9.2
+    */
+    virtual bool IsEnabled(const wxDataViewItem &item,
+                           unsigned int col) const;
+

     /**
         Override this so the control can query the child items of an item.
         Returns the number of items.
     /**
         Override this so the control can query the child items of an item.
         Returns the number of items.


@@ -173,7 +212,7 @@ public:
 
     /**
         Override this to indicate which wxDataViewItem representing the parent
 
     /**
         Override this to indicate which wxDataViewItem representing the parent

-        of @a item or an invalid wxDataViewItem if the the root item is
+        of @a item or an invalid wxDataViewItem if the root item is

         the parent item.
     */
     virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0;
         the parent item.
     */
     virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0;


@@ -188,7 +227,7 @@ public:
     /**
         Override this method to indicate if a container item merely acts as a
         headline (or for categorisation) or if it also acts a normal item with
     /**
         Override this method to indicate if a container item merely acts as a
         headline (or for categorisation) or if it also acts a normal item with

-        entries for futher columns. By default returns @false.
+        entries for further columns. By default returns @false.

     */
     virtual bool HasContainerColumns(const wxDataViewItem& item) const;
 
     */
     virtual bool HasContainerColumns(const wxDataViewItem& item) const;
 


@@ -219,7 +258,7 @@ public:
     bool HasValue(const wxDataViewItem& item, unsigned col) const;
 
     /**
     bool HasValue(const wxDataViewItem& item, unsigned col) const;
 
     /**

-        Override this to indicate of @a item is a container, i.e. if
+        Override this to indicate of @a item is a container, i.e.\ if

         it can have child items.
     */
     virtual bool IsContainer(const wxDataViewItem& item) const = 0;
         it can have child items.
     */
     virtual bool IsContainer(const wxDataViewItem& item) const = 0;


@@ -227,41 +266,41 @@ public:
     /**
         Call this to inform the model that an item has been added to the data.
     */
     /**
         Call this to inform the model that an item has been added to the data.
     */

-    virtual bool ItemAdded(const wxDataViewItem& parent,
+    bool ItemAdded(const wxDataViewItem& parent,

                            const wxDataViewItem& item);
 
     /**
         Call this to inform the model that an item has changed.
 
                            const wxDataViewItem& item);
 
     /**
         Call this to inform the model that an item has changed.
 

-        This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED

         event (in which the column fields will not be set) to the user.
     */
         event (in which the column fields will not be set) to the user.
     */

-    virtual bool ItemChanged(const wxDataViewItem& item);
+    bool ItemChanged(const wxDataViewItem& item);

 
     /**
         Call this to inform the model that an item has been deleted from the data.
     */
 
     /**
         Call this to inform the model that an item has been deleted from the data.
     */

-    virtual bool ItemDeleted(const wxDataViewItem& parent,
+    bool ItemDeleted(const wxDataViewItem& parent,

                              const wxDataViewItem& item);
 
     /**
         Call this to inform the model that several items have been added to the data.
     */
                              const wxDataViewItem& item);
 
     /**
         Call this to inform the model that several items have been added to the data.
     */

-    virtual bool ItemsAdded(const wxDataViewItem& parent,
+    bool ItemsAdded(const wxDataViewItem& parent,

                             const wxDataViewItemArray& items);
 
     /**
         Call this to inform the model that several items have changed.
 
                             const wxDataViewItemArray& items);
 
     /**
         Call this to inform the model that several items have changed.
 

-        This will eventually emit wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED

         events (in which the column fields will not be set) to the user.
     */
         events (in which the column fields will not be set) to the user.
     */

-    virtual bool ItemsChanged(const wxDataViewItemArray& items);
+    bool ItemsChanged(const wxDataViewItemArray& items);

 
     /**
         Call this to inform the model that several items have been deleted.
     */
 
     /**
         Call this to inform the model that several items have been deleted.
     */

-    virtual bool ItemsDeleted(const wxDataViewItem& parent,
+    bool ItemsDeleted(const wxDataViewItem& parent,

                               const wxDataViewItemArray& items);
 
     /**
                               const wxDataViewItemArray& items);
 
     /**


@@ -294,12 +333,16 @@ public:
         This is also called from wxDataViewCtrl's internal editing code, e.g. when
         editing a text field in the control.
 
         This is also called from wxDataViewCtrl's internal editing code, e.g. when
         editing a text field in the control.
 

-        This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+        This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED

         event to the user.
     */
     virtual bool ValueChanged(const wxDataViewItem& item,
                               unsigned int col);
 
         event to the user.
     */
     virtual bool ValueChanged(const wxDataViewItem& item,
                               unsigned int col);
 

+    
+    virtual bool IsListModel() const;
+    virtual bool IsVirtualListModel() const;
+

 protected:
 
     /**
 protected:
 
     /**


@@ -311,40 +354,29 @@ protected:
 
 
 /**
 
 
 /**

-    @class wxDataViewIndexListModel
+    @class wxDataViewListModel

 
 

-    wxDataViewIndexListModel is a specialized data model which lets you address
-    an item by its position (row) rather than its wxDataViewItem (which you can
-    obtain from this class).
-    This model also provides its own wxDataViewIndexListModel::Compare
-    method which sorts the model's data by the index.
-
-    This model is not a virtual model since the control stores each wxDataViewItem.
-    Use wxDataViewVirtualListModel if you need to display millions of items or
-    have other reason to use a virtual control.
+    Base class with abstract API for wxDataViewIndexListModel and
+    wxDataViewVirtualListModel.

 
     @library{wxadv}
     @category{dvc}
 */
 
     @library{wxadv}
     @category{dvc}
 */

-class wxDataViewIndexListModel : public wxDataViewModel
+class wxDataViewListModel : public wxDataViewModel

 {
 public:
 {
 public:

-    /**
-        Constructor.
-    */
-    wxDataViewIndexListModel(unsigned int initial_size = 0);

 
     /**
         Destructor.
     */
 
     /**
         Destructor.
     */

-    virtual ~wxDataViewIndexListModel();
+    virtual ~wxDataViewListModel();

 
     /**
         Compare method that sorts the items by their index.
     */
     int Compare(const wxDataViewItem& item1,
                 const wxDataViewItem& item2,
 
     /**
         Compare method that sorts the items by their index.
     */
     int Compare(const wxDataViewItem& item1,
                 const wxDataViewItem& item2,

-                unsigned int column, bool ascending);
+                unsigned int column, bool ascending) const;

 
     /**
         Override this to indicate that the row has special font attributes.
 
     /**
         Override this to indicate that the row has special font attributes.


@@ -367,25 +399,82 @@ public:
                          wxDataViewItemAttr& attr) const;
 
     /**
                          wxDataViewItemAttr& attr) const;
 
     /**

-        Returns the number of items (i.e. rows) in the list.
+        Override this if you want to disable specific items.
+
+        The base class version always returns @true, thus making all items
+        enabled by default.
+
+        @param row
+            The row of the item whose enabled status is requested.
+        @param col
+            The column of the item whose enabled status is requested.
+        @return
+            @true if the item at this row and column should be enabled,
+            @false otherwise.
+
+        @note See wxDataViewModel::IsEnabled() for the current status of
+              support for disabling the items under different platforms.
+
+        @since 2.9.2

     */
     */

-    unsigned int GetCount() const;
+    virtual bool IsEnabledByRow(unsigned int row,
+                                unsigned int col) const;

 
     /**
 
     /**

-        Returns the wxDataViewItem at the given @e row.
+        Returns the number of items (or rows) in the list.

     */
     */

-    wxDataViewItem GetItem(unsigned int row) const;
+    unsigned int GetCount() const = 0;

 
     /**
         Returns the position of given @e item.
     */
 
     /**
         Returns the position of given @e item.
     */

-    unsigned int GetRow(const wxDataViewItem& item) const;
+    unsigned int GetRow(const wxDataViewItem& item) const = 0;

 
     /**
         Override this to allow getting values from the model.
     */
     virtual void GetValueByRow(wxVariant& variant, unsigned int row,
 
     /**
         Override this to allow getting values from the model.
     */
     virtual void GetValueByRow(wxVariant& variant, unsigned int row,

-                          unsigned int col) const = 0;
+                               unsigned int col) const = 0;
+
+    /**
+        Called in order to set a value in the model.
+    */
+    virtual bool SetValueByRow(const wxVariant& variant, unsigned int row,
+                               unsigned int col) = 0;
+};
+
+
+/**
+    @class wxDataViewIndexListModel
+
+    wxDataViewIndexListModel is a specialized data model which lets you address
+    an item by its position (row) rather than its wxDataViewItem (which you can
+    obtain from this class).
+    This model also provides its own wxDataViewIndexListModel::Compare
+    method which sorts the model's data by the index.
+
+    This model is not a virtual model since the control stores each wxDataViewItem.
+    Use wxDataViewVirtualListModel if you need to display millions of items or
+    have other reason to use a virtual control.
+
+    @see wxDataViewListModel for the API.
+    
+    @library{wxadv}
+    @category{dvc}
+*/
+
+class wxDataViewIndexListModel : public wxDataViewListModel
+{
+public:
+    /**
+        Constructor.
+    */
+    wxDataViewIndexListModel(unsigned int initial_size = 0);
+
+    /**
+       Returns the wxDataViewItem at the given @e row.
+    */
+    wxDataViewItem GetItem(unsigned int row) const;

 
     /**
         Call this after if the data has to be read again from the model.
 
     /**
         Call this after if the data has to be read again from the model.


@@ -431,15 +520,8 @@ public:
     */
     void RowsDeleted(const wxArrayInt& rows);
 
     */
     void RowsDeleted(const wxArrayInt& rows);
 

-    /**
-        Called in order to set a value in the model.
-    */
-    virtual bool SetValueByRow(const wxVariant& variant, unsigned int row,
-                          unsigned int col) = 0;

 };
 
 };
 

-
-

 /**
     @class wxDataViewVirtualListModel
 
 /**
     @class wxDataViewVirtualListModel
 


@@ -448,15 +530,15 @@ public:
     the exact same interface as wxDataViewIndexListModel.
     The important difference is that under platforms other than OS X, using this
     model will result in a truly virtual control able to handle millions of items
     the exact same interface as wxDataViewIndexListModel.
     The important difference is that under platforms other than OS X, using this
     model will result in a truly virtual control able to handle millions of items

-    as the control doesn't store any item (a feature not supported by the
-    Carbon API under OS X).
+    as the control doesn't store any item (a feature not supported by OS X).

 
 

-    @see wxDataViewIndexListModel for the API.
+    @see wxDataViewListModel for the API.

 
     @library{wxadv}
     @category{dvc}
 */
 
     @library{wxadv}
     @category{dvc}
 */

-class wxDataViewVirtualListModel : public wxDataViewModel
+
+class wxDataViewVirtualListModel : public wxDataViewListModel

 {
 public:
     /**
 {
 public:
     /**


@@ -465,9 +547,54 @@ public:
     wxDataViewVirtualListModel(unsigned int initial_size = 0);
 
     /**
     wxDataViewVirtualListModel(unsigned int initial_size = 0);
 
     /**

-        Returns the number of virtual items (i.e. rows) in the list.
+       Returns the wxDataViewItem at the given @e row.
+    */
+    wxDataViewItem GetItem(unsigned int row) const;
+
+    /**
+        Call this after if the data has to be read again from the model.
+        This is useful after major changes when calling the methods below
+        (possibly thousands of times) doesn't make sense.

     */
     */

-    unsigned int GetCount() const;
+    void Reset(unsigned int new_size);
+
+    /**
+        Call this after a row has been appended to the model.
+    */
+    void RowAppended();
+
+    /**
+        Call this after a row has been changed.
+    */
+    void RowChanged(unsigned int row);
+
+    /**
+        Call this after a row has been deleted.
+    */
+    void RowDeleted(unsigned int row);
+
+    /**
+        Call this after a row has been inserted at the given position.
+    */
+    void RowInserted(unsigned int before);
+
+    /**
+        Call this after a row has been prepended to the model.
+    */
+    void RowPrepended();
+
+    /**
+        Call this after a value has been changed.
+    */
+    void RowValueChanged(unsigned int row, unsigned int col);
+
+    /**
+        Call this after rows have been deleted.
+        The array will internally get copied and sorted in descending order so
+        that the rows with the highest position will be deleted first.
+    */
+    void RowsDeleted(const wxArrayInt& rows);
+

 };
 
 
 };
 
 


@@ -502,10 +629,66 @@ public:
     */
     void SetColour(const wxColour& colour);
 
     */
     void SetColour(const wxColour& colour);
 

+    /**
+        Call this to set the background colour to use.
+
+        Currently this attribute is only supported in the generic version of
+        wxDataViewCtrl and ignored by the native GTK+ and OS X implementations.
+
+        @since 2.9.4
+    */
+    void SetBackgroundColour(const wxColour& colour);
+

     /**
         Call this to indicate that the item shall be displayed in italic text.
     */
     void SetItalic(bool set);
     /**
         Call this to indicate that the item shall be displayed in italic text.
     */
     void SetItalic(bool set);

+
+
+    /**
+       Returns true if the colour property has been set.
+    */
+    bool HasColour() const;
+
+    /**
+       Returns this attribute's colour.
+    */
+    const wxColour& GetColour() const;
+
+    /**
+       Returns true if any property affecting the font has been set.
+    */
+    bool HasFont() const;
+
+    /**
+       Returns value of the bold property.
+    */
+    bool GetBold() const;
+
+    /**
+       Returns value of the italics property.
+    */
+    bool GetItalic() const;
+
+    /**
+       Returns true if the background colour property has been set.
+    */
+    bool HasBackgroundColour() const;
+
+    /**
+       Returns the colour to be used for the background.
+    */
+    const wxColour& GetBackgroundColour() const;
+
+    /**
+       Returns true if none of the properties have been set.
+    */
+    bool IsDefault() const;
+
+    /**
+       Return the font based on the given one with this attribute applied to it.
+    */
+    wxFont GetEffectiveFont(const wxFont& font) const;

 };
 
 
 };
 
 


@@ -536,8 +719,9 @@ public:
     /**
         Constructor.
     */
     /**
         Constructor.
     */

-    wxDataViewItem(void* id = NULL);
+    wxDataViewItem();

     wxDataViewItem(const wxDataViewItem& item);
     wxDataViewItem(const wxDataViewItem& item);

+    explicit wxDataViewItem(void* id);

     //@}
 
     /**
     //@}
 
     /**


@@ -552,6 +736,61 @@ public:
 };
 
 
 };
 
 

+// ----------------------------------------------------------------------------
+// wxDataViewCtrl flags
+// ----------------------------------------------------------------------------
+
+// size of a wxDataViewRenderer without contents:
+#define wxDVC_DEFAULT_RENDERER_SIZE     20
+
+// the default width of new (text) columns:
+#define wxDVC_DEFAULT_WIDTH             80
+
+// the default width of new toggle columns:
+#define wxDVC_TOGGLE_DEFAULT_WIDTH      30
+
+// the default minimal width of the columns:
+#define wxDVC_DEFAULT_MINWIDTH          30
+
+// The default alignment of wxDataViewRenderers is to take
+// the alignment from the column it owns.
+#define wxDVR_DEFAULT_ALIGNMENT         -1
+
+#define wxDV_SINGLE                  0x0000     // for convenience
+#define wxDV_MULTIPLE                0x0001     // can select multiple items
+
+#define wxDV_NO_HEADER               0x0002     // column titles not visible
+#define wxDV_HORIZ_RULES             0x0004     // light horizontal rules between rows
+#define wxDV_VERT_RULES              0x0008     // light vertical rules between columns
+
+#define wxDV_ROW_LINES               0x0010     // alternating colour in rows
+#define wxDV_VARIABLE_LINE_HEIGHT    0x0020     // variable line height
+
+// events
+
+wxEventType wxEVT_DATAVIEW_SELECTION_CHANGED;
+
+wxEventType wxEVT_DATAVIEW_ITEM_ACTIVATED;
+wxEventType wxEVT_DATAVIEW_ITEM_COLLAPSING;
+wxEventType wxEVT_DATAVIEW_ITEM_COLLAPSED;
+wxEventType wxEVT_DATAVIEW_ITEM_EXPANDING;
+wxEventType wxEVT_DATAVIEW_ITEM_EXPANDED;
+wxEventType wxEVT_DATAVIEW_ITEM_START_EDITING;
+wxEventType wxEVT_DATAVIEW_ITEM_EDITING_STARTED;
+wxEventType wxEVT_DATAVIEW_ITEM_EDITING_DONE;
+wxEventType wxEVT_DATAVIEW_ITEM_VALUE_CHANGED;
+
+wxEventType wxEVT_DATAVIEW_ITEM_CONTEXT_MENU;
+
+wxEventType wxEVT_DATAVIEW_COLUMN_HEADER_CLICK;
+wxEventType wxEVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK;
+wxEventType wxEVT_DATAVIEW_COLUMN_SORTED;
+wxEventType wxEVT_DATAVIEW_COLUMN_REORDERED;
+wxEventType wxEVT_DATAVIEW_CACHE_HINT;
+
+wxEventType wxEVT_DATAVIEW_ITEM_BEGIN_DRAG;
+wxEventType wxEVT_DATAVIEW_ITEM_DROP_POSSIBLE;
+wxEventType wxEVT_DATAVIEW_ITEM_DROP;

 
 /**
     @class wxDataViewCtrl
 
 /**
     @class wxDataViewCtrl


@@ -589,59 +828,76 @@ public:
            Multiple selection mode.
     @style{wxDV_ROW_LINES}
            Use alternating colours for rows if supported by platform and theme.
            Multiple selection mode.
     @style{wxDV_ROW_LINES}
            Use alternating colours for rows if supported by platform and theme.

+           Currently only supported by the native GTK and OS X implementations
+           but not by the generic one.

     @style{wxDV_HORIZ_RULES}
     @style{wxDV_HORIZ_RULES}

-           Display fine rules between row if supported.
+           Display the separator lines between rows.

     @style{wxDV_VERT_RULES}
     @style{wxDV_VERT_RULES}

-           Display fine rules between columns is supported.
+           Display the separator lines between columns.

     @style{wxDV_VARIABLE_LINE_HEIGHT}
            Allow variable line heights.
            This can be inefficient when displaying large number of items.
     @style{wxDV_VARIABLE_LINE_HEIGHT}
            Allow variable line heights.
            This can be inefficient when displaying large number of items.

+    @style{wxDV_NO_HEADER}
+           Do not show column headers (which are shown by default).

     @endStyleTable
 
     @beginEventEmissionTable{wxDataViewEvent}
     @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)}
     @endStyleTable
 
     @beginEventEmissionTable{wxDataViewEvent}
     @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event.
+           Process a @c wxEVT_DATAVIEW_SELECTION_CHANGED event.

     @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)}
     @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_ACTIVATED event. This event
+           is triggered by double clicking an item or pressing some special key
+           (usually "Enter") when it is focused.

     @event{EVT_DATAVIEW_ITEM_START_EDITING(id, func)}
     @event{EVT_DATAVIEW_ITEM_START_EDITING(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event. This
+           Process a @c wxEVT_DATAVIEW_ITEM_START_EDITING event. This

            event can be vetoed in order to prevent editing on an item by item
            event can be vetoed in order to prevent editing on an item by item

-           basis. Still experimental.
+           basis.

     @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)}
     @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EDITING_STARTED event.

     @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)}
     @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EDITING_DONE event.

     @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)}
     @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING event.
+           Process a @c wxEVT_DATAVIEW_ITEM_COLLAPSING event.

     @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)}
     @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_COLLAPSED event.

     @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)}
     @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EXPANDING event.

     @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)}
     @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EXPANDED event.

     @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}
     @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event.

     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}
     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event.
+           Process a @c wxEVT_DATAVIEW_ITEM_CONTEXT_MENU event
+           generated when the user right clicks inside the control. Notice that
+           this menu is generated even if the click didn't occur on any valid
+           item, in this case wxDataViewEvent::GetItem() simply returns an
+           invalid item.

     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}
     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICK event.

     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}
     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK event.
+           Notice that currently this event is not generated in the native OS X
+           versions of the control.

     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}
     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_SORTED event.

     @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)}
     @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_REORDERED event.

     @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)}
     @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event.
+           Process a @c wxEVT_DATAVIEW_ITEM_BEGIN_DRAG event.

     @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)}
     @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE event.
+           Process a @c wxEVT_DATAVIEW_ITEM_DROP_POSSIBLE event.

     @event{EVT_DATAVIEW_ITEM_DROP(id, func)}
     @event{EVT_DATAVIEW_ITEM_DROP(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event.
+           Process a @c wxEVT_DATAVIEW_ITEM_DROP event.

     @endEventTable
 
     @endEventTable
 

+    Notice that this control doesn't allow to process generic mouse events such
+    as @c wxEVT_LEFT_DOWN in all ports (notably it doesn't work in wxGTK). If
+    you need to handle any mouse events not covered by the ones above, consider
+    using a custom renderer for the cells that must handle them.
+

     @library{wxadv}
     @category{ctrl,dvc}
     @library{wxadv}
     @category{ctrl,dvc}

-    @appearance{dataviewctrl.png}
+    @appearance{dataviewctrl}

 */
 class wxDataViewCtrl : public wxControl
 {
 */
 class wxDataViewCtrl : public wxControl
 {


@@ -658,13 +914,24 @@ public:
                    const wxPoint& pos = wxDefaultPosition,
                    const wxSize& size = wxDefaultSize,
                    long style = 0,
                    const wxPoint& pos = wxDefaultPosition,
                    const wxSize& size = wxDefaultSize,
                    long style = 0,

-                   const wxValidator& validator = wxDefaultValidator);
+                   const wxValidator& validator = wxDefaultValidator,
+                   const wxString& name = wxDataViewCtrlNameStr);

 
     /**
         Destructor.
     */
     virtual ~wxDataViewCtrl();
 
 
     /**
         Destructor.
     */
     virtual ~wxDataViewCtrl();
 

+    /**
+        Create the control. Useful for two step creation.
+    */
+    bool Create(wxWindow* parent, wxWindowID id,
+                const wxPoint& pos = wxDefaultPosition,
+                const wxSize& size = wxDefaultSize,
+                long style = 0,
+                const wxValidator& validator = wxDefaultValidator,
+                const wxString& name = wxDataViewCtrlNameStr);
+

     /**
         Appends a wxDataViewColumn to the control. Returns @true on success.
 
     /**
         Appends a wxDataViewColumn to the control. Returns @true on success.
 


@@ -705,6 +972,25 @@ public:
                                          int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 
                                          int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 

+    //@{
+    /**
+        Prepends a column for rendering a bitmap. Returns the wxDataViewColumn
+        created in the function or @NULL on failure.
+    */
+    wxDataViewColumn* PrependBitmapColumn(const wxString& label,
+                                         unsigned int model_column,
+                                         wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                         int width = -1,
+                                         wxAlignment align = wxALIGN_CENTER,
+                                         int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* PrependBitmapColumn(const wxBitmap& label,
+                                         unsigned int model_column,
+                                         wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                         int width = -1,
+                                         wxAlignment align = wxALIGN_CENTER,
+                                         int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+

     //@{
     /**
         Appends a column for rendering a date. Returns the wxDataViewColumn
     //@{
     /**
         Appends a column for rendering a date. Returns the wxDataViewColumn


@@ -727,6 +1013,28 @@ public:
                                        int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 
                                        int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 

+    //@{
+    /**
+        Prepends a column for rendering a date. Returns the wxDataViewColumn
+        created in the function or @NULL on failure.
+
+        @note The @a align parameter is applied to both the column header and
+              the column renderer.
+    */
+    wxDataViewColumn* PrependDateColumn(const wxString& label,
+                                       unsigned int model_column,
+                                       wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE,
+                                       int width = -1,
+                                       wxAlignment align = wxALIGN_NOT,
+                                       int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* PrependDateColumn(const wxBitmap& label,
+                                       unsigned int model_column,
+                                       wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE,
+                                       int width = -1,
+                                       wxAlignment align = wxALIGN_NOT,
+                                       int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+

     //@{
     /**
         Appends a column for rendering text with an icon. Returns the wxDataViewColumn
     //@{
     /**
         Appends a column for rendering text with an icon. Returns the wxDataViewColumn


@@ -750,6 +1058,29 @@ public:
                                            int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 
                                            int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 

+    //@{
+    /**
+        Prepends a column for rendering text with an icon. Returns the wxDataViewColumn
+        created in the function or @NULL on failure.
+        This method uses the wxDataViewIconTextRenderer class.
+
+        @note The @a align parameter is applied to both the column header and
+              the column renderer.
+    */
+    wxDataViewColumn* PrependIconTextColumn(const wxString& label,
+                                           unsigned int model_column,
+                                           wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                           int width = -1,
+                                           wxAlignment align = wxALIGN_NOT,
+                                           int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* PrependIconTextColumn(const wxBitmap& label,
+                                           unsigned int model_column,
+                                           wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                           int width = -1,
+                                           wxAlignment align = wxALIGN_NOT,
+                                           int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+

     //@{
     /**
         Appends a column for rendering a progress indicator. Returns the
     //@{
     /**
         Appends a column for rendering a progress indicator. Returns the


@@ -772,6 +1103,28 @@ public:
                                            int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 
                                            int flags = wxDATAVIEW_COL_RESIZABLE);
     //@}
 

+    //@{
+    /**
+        Prepends a column for rendering a progress indicator. Returns the
+        wxDataViewColumn created in the function or @NULL on failure.
+
+        @note The @a align parameter is applied to both the column header and
+              the column renderer.
+    */
+    wxDataViewColumn* PrependProgressColumn(const wxString& label,
+                                           unsigned int model_column,
+                                           wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                           int width = 80,
+                                           wxAlignment align = wxALIGN_CENTER,
+                                           int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* PrependProgressColumn(const wxBitmap& label,
+                                           unsigned int model_column,
+                                           wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                           int width = 80,
+                                           wxAlignment align = wxALIGN_CENTER,
+                                           int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+

     //@{
     /**
         Appends a column for rendering text. Returns the wxDataViewColumn
     //@{
     /**
         Appends a column for rendering text. Returns the wxDataViewColumn


@@ -796,19 +1149,63 @@ public:
 
     //@{
     /**
 
     //@{
     /**

-        Appends a column for rendering a toggle. Returns the wxDataViewColumn
+        Prepends a column for rendering text. Returns the wxDataViewColumn
+        created in the function or @NULL on failure.
+
+        @note The @a align parameter is applied to both the column header and
+              the column renderer.
+    */
+    wxDataViewColumn* PrependTextColumn(const wxString& label,
+                                       unsigned int model_column,
+                                       wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                       int width = -1,
+                                       wxAlignment align = wxALIGN_NOT,
+                                       int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* PrependTextColumn(const wxBitmap& label,
+                                       unsigned int model_column,
+                                       wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                       int width = -1,
+                                       wxAlignment align = wxALIGN_NOT,
+                                       int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+
+    //@{
+    /**
+        Appends a column for rendering a toggle. Returns the wxDataViewColumn
+        created in the function or @NULL on failure.
+
+        @note The @a align parameter is applied to both the column header and
+              the column renderer.
+    */
+    wxDataViewColumn* AppendToggleColumn(const wxString& label,
+                                         unsigned int model_column,
+                                         wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                         int width = 30,
+                                         wxAlignment align = wxALIGN_CENTER,
+                                         int flags = wxDATAVIEW_COL_RESIZABLE);
+    wxDataViewColumn* AppendToggleColumn(const wxBitmap& label,
+                                         unsigned int model_column,
+                                         wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
+                                         int width = 30,
+                                         wxAlignment align = wxALIGN_CENTER,
+                                         int flags = wxDATAVIEW_COL_RESIZABLE);
+    //@}
+
+    //@{
+    /**
+        Prepends a column for rendering a toggle. Returns the wxDataViewColumn

         created in the function or @NULL on failure.
 
         @note The @a align parameter is applied to both the column header and
               the column renderer.
     */
         created in the function or @NULL on failure.
 
         @note The @a align parameter is applied to both the column header and
               the column renderer.
     */

-    wxDataViewColumn* AppendToggleColumn(const wxString& label,
+    wxDataViewColumn* PrependToggleColumn(const wxString& label,

                                          unsigned int model_column,
                                          wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
                                          int width = 30,
                                          wxAlignment align = wxALIGN_CENTER,
                                          int flags = wxDATAVIEW_COL_RESIZABLE);
                                          unsigned int model_column,
                                          wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
                                          int width = 30,
                                          wxAlignment align = wxALIGN_CENTER,
                                          int flags = wxDATAVIEW_COL_RESIZABLE);

-    wxDataViewColumn* AppendToggleColumn(const wxBitmap& label,
+    wxDataViewColumn* PrependToggleColumn(const wxBitmap& label,

                                          unsigned int model_column,
                                          wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
                                          int width = 30,
                                          unsigned int model_column,
                                          wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
                                          int width = 30,


@@ -833,18 +1230,20 @@ public:
     virtual void Collapse(const wxDataViewItem& item);
 
     /**
     virtual void Collapse(const wxDataViewItem& item);
 
     /**

-        Create the control. Useful for two step creation.
+        Deletes given column.

     */
     */

-    bool Create(wxWindow* parent, wxWindowID id,
-                const wxPoint& pos = wxDefaultPosition,
-                const wxSize& size = wxDefaultSize,
-                long style = 0,
-                const wxValidator& validator = wxDefaultValidator);
+    virtual bool DeleteColumn(wxDataViewColumn* column);

 
     /**
 
     /**

-        Deletes given column.
+        Programmatically starts editing given cell of @a item.
+
+        Doesn't do anything if the item or this column is not editable.
+
+        @note Currently not implemented in wxOSX/Carbon.
+
+        @since 2.9.4

     */
     */

-    virtual bool DeleteColumn(wxDataViewColumn* column);
+    virtual void EditItem(const wxDataViewItem& item, const wxDataViewColumn *column);

 
     /**
        Enable drag operations using the given @a format.
 
     /**
        Enable drag operations using the given @a format.


@@ -895,13 +1294,59 @@ public:
     */
     wxDataViewColumn* GetExpanderColumn() const;
 
     */
     wxDataViewColumn* GetExpanderColumn() const;
 

+    /**
+        Returns the currently focused item.
+
+        This is the item that the keyboard commands apply to. It may be invalid
+        if there is no focus currently.
+
+        This method is mostly useful for the controls with @c wxDV_MULTIPLE
+        style as in the case of single selection it returns the same thing as
+        GetSelection().
+
+        Notice that under all platforms except Mac OS X the currently focused
+        item may be selected or not but under OS X the current item is always
+        selected.
+
+        @see SetCurrentItem(), GetCurrentColumn()
+
+        @since 2.9.2
+     */
+    wxDataViewItem GetCurrentItem() const;
+
+    /**
+        Returns the column that currently has focus.
+
+        If the focus is set to individual cell within the currently focused
+        item (as opposed to being on the item as a whole), then this is the
+        column that the focus is on.
+
+        Returns NULL if no column currently has focus.
+
+        @see GetCurrentItem()
+
+        @since 2.9.4
+     */
+    wxDataViewColumn *GetCurrentColumn() const;
+

     /**
         Returns indentation.
     */
     int GetIndent() const;
 
     /**
     /**
         Returns indentation.
     */
     int GetIndent() const;
 
     /**

-        Returns item rect.
+        Returns item rectangle.
+
+        This method is currently not implemented at all in wxGTK and only
+        implemented for non-@NULL @a col argument in wxOSX. It is fully
+        implemented in the generic version of the control.
+
+        @param item
+            A valid item.
+        @param col
+            If non-@NULL, the rectangle returned corresponds to the
+            intersection of the item with the specified column. If @NULL, the
+            rectangle spans all the columns.

     */
     virtual wxRect GetItemRect(const wxDataViewItem& item,
                                const wxDataViewColumn* col = NULL) const;
     */
     virtual wxRect GetItemRect(const wxDataViewItem& item,
                                const wxDataViewColumn* col = NULL) const;


@@ -911,13 +1356,35 @@ public:
     */
     wxDataViewModel* GetModel();
 
     */
     wxDataViewModel* GetModel();
 

+    /**
+        Returns the number of currently selected items.
+
+        This method may be called for both the controls with single and
+        multiple selections and returns the number of selected item, possibly
+        0, in any case.
+
+        @since 2.9.3
+     */
+    virtual int GetSelectedItemsCount() const;
+

     /**
         Returns first selected item or an invalid item if none is selected.
     /**
         Returns first selected item or an invalid item if none is selected.

+
+        This method may be called for both the controls with single and
+        multiple selections but returns an invalid item if more than one item
+        is selected in the latter case, use HasSelection() to determine if
+        there are any selected items when using multiple selection.

     */
     virtual wxDataViewItem GetSelection() const;
 
     /**
         Fills @a sel with currently selected items and returns their number.
     */
     virtual wxDataViewItem GetSelection() const;
 
     /**
         Fills @a sel with currently selected items and returns their number.

+
+        This method may be called for both the controls with single and
+        multiple selections. In the single selection case it returns the array
+        with at most one element in it.
+
+        @see GetSelectedItemsCount()

     */
     virtual int GetSelections(wxDataViewItemArray& sel) const;
 
     */
     virtual int GetSelections(wxDataViewItemArray& sel) const;
 


@@ -927,6 +1394,20 @@ public:
     */
     virtual wxDataViewColumn* GetSortingColumn() const;
 
     */
     virtual wxDataViewColumn* GetSortingColumn() const;
 

+    /**
+        Returns true if any items are currently selected.
+
+        This method may be called for both the controls with single and
+        multiple selections.
+
+        Calling this method is equivalent to calling GetSelectedItemsCount()
+        and comparing its result with 0 but is more clear and might also be
+        implemented more efficiently in the future.
+
+        @since 2.9.3
+     */
+    bool HasSelection() const;
+

     /**
         Hittest.
     */
     /**
         Hittest.
     */


@@ -945,6 +1426,10 @@ public:
 
     /**
         Select the given item.
 
     /**
         Select the given item.

+
+        In single selection mode this changes the (unique) currently selected
+        item. In multi selection mode, the @a item is selected and the
+        previously selected items remain selected.

     */
     virtual void Select(const wxDataViewItem& item);
 
     */
     virtual void Select(const wxDataViewItem& item);
 


@@ -959,7 +1444,26 @@ public:
     void SetExpanderColumn(wxDataViewColumn* col);
 
     /**
     void SetExpanderColumn(wxDataViewColumn* col);
 
     /**

-        Sets the indendation.
+        Changes the currently focused item.
+
+        The @a item parameter must be valid, there is no way to remove the
+        current item from the control.
+
+        In single selection mode, calling this method is the same as calling
+        Select() and is thus not very useful. In multiple selection mode this
+        method only moves the current item however without changing the
+        selection except under OS X where the current item is always selected,
+        so calling SetCurrentItem() selects @a item if it hadn't been selected
+        before.
+
+        @see GetCurrentItem()
+
+        @since 2.9.2
+     */
+    void SetCurrentItem(const wxDataViewItem& item);
+
+    /**
+        Sets the indentation.

     */
     void SetIndent(int indent);
 
     */
     void SetIndent(int indent);
 


@@ -978,6 +1482,26 @@ public:
         This method only has effect if multiple selections are allowed.
     */
     virtual void UnselectAll();
         This method only has effect if multiple selections are allowed.
     */
     virtual void UnselectAll();

+
+    /**
+        Sets the row height.
+
+        This function can only be used when all rows have the same height, i.e.
+        when wxDV_VARIABLE_LINE_HEIGHT flag is not used.
+
+        Currently this is implemented in the generic and native GTK versions
+        only and nothing is done (and @false returned) when using OS X port.
+
+        Also notice that this method can only be used to increase the row
+        height compared with the default one (as determined by the return value
+        of wxDataViewRenderer::GetSize()), if it is set to a too small value
+        then the minimum required by the renderers will be used.
+
+        @return @true if the line height was changed or @false otherwise.
+
+        @since 2.9.2
+    */
+    virtual bool SetRowHeight(int rowHeight);

 };
 
 
 };
 
 


@@ -1017,34 +1541,46 @@ public:
 
     /**
         Called by owning model.
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemAdded(const wxDataViewItem& parent,
                            const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
     */
     virtual bool ItemAdded(const wxDataViewItem& parent,
                            const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemChanged(const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
     */
     virtual bool ItemChanged(const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemDeleted(const wxDataViewItem& parent,
                              const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.
     */
     virtual bool ItemDeleted(const wxDataViewItem& parent,
                              const wxDataViewItem& item) = 0;
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemsAdded(const wxDataViewItem& parent,
                             const wxDataViewItemArray& items);
 
     /**
         Called by owning model.
     */
     virtual bool ItemsAdded(const wxDataViewItem& parent,
                             const wxDataViewItemArray& items);
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemsChanged(const wxDataViewItemArray& items);
 
     /**
         Called by owning model.
     */
     virtual bool ItemsChanged(const wxDataViewItemArray& items);
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ItemsDeleted(const wxDataViewItem& parent,
                               const wxDataViewItemArray& items);
     */
     virtual bool ItemsDeleted(const wxDataViewItem& parent,
                               const wxDataViewItemArray& items);


@@ -1061,6 +1597,8 @@ public:
 
     /**
         Called by owning model.
 
     /**
         Called by owning model.

+
+        @return Always return @true from this function in derived classes.

     */
     virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0;
 };
     */
     virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0;
 };


@@ -1071,18 +1609,54 @@ public:
 */
 enum wxDataViewCellMode
 {
 */
 enum wxDataViewCellMode
 {

+    /**
+        The cell only displays information and cannot be manipulated or
+        otherwise interacted with in any way.
+
+        Note that this doesn't mean that the row being drawn can't be selected,
+        just that a particular element of it cannot be individually modified.
+     */

     wxDATAVIEW_CELL_INERT,
 
     /**
     wxDATAVIEW_CELL_INERT,
 
     /**

-        Indicates that the user can double click the cell and something will
-        happen (e.g. a window for editing a date will pop up).
+        Indicates that the cell can be @em activated by clicking it or using
+        keyboard.
+
+        Activating a cell is an alternative to showing inline editor when the
+        value can be edited in a simple way that doesn't warrant full editor
+        control. The most typical use of cell activation is toggling the
+        checkbox in wxDataViewToggleRenderer; others would be e.g. an embedded
+        volume slider or a five-star rating column.
+
+        The exact means of activating a cell are platform-dependent, but they
+        are usually similar to those used for inline editing of values.
+        Typically, a cell would be activated by Space or Enter keys or by left
+        mouse click.
+
+        @note Do not confuse this with item activation in wxDataViewCtrl
+              and the wxEVT_DATAVIEW_ITEM_ACTIVATED event. That one is
+              used for activating the item (or, to put it differently, the
+              entire row) similarly to analogous messages in wxTreeCtrl and
+              wxListCtrl, and the effect differs (play a song, open a file
+              etc.). Cell activation, on the other hand, is all about
+              interacting with the individual cell.
+
+        @see wxDataViewCustomRenderer::ActivateCell()

     */
     wxDATAVIEW_CELL_ACTIVATABLE,
 
     /**
     */
     wxDATAVIEW_CELL_ACTIVATABLE,
 
     /**

-        Indicates that the user can edit the data in-place, i.e. an control
-        will show up after a slow click on the cell. This behaviour is best
-        known from changing the filename in most file managers etc.
+        Indicates that the user can edit the data in-place in an inline editor
+        control that will show up when the user wants to edit the cell.
+
+        A typical example of this behaviour is changing the filename in a file
+        managers.
+
+        Editing is typically triggered by slowly double-clicking the cell or by
+        a platform-dependent keyboard shortcut (F2 is typical on Windows, Space
+        and/or Enter is common elsewhere and supported on Windows too).
+
+        @see wxDataViewCustomRenderer::CreateEditorCtrl()

     */
     wxDATAVIEW_CELL_EDITABLE
 };
     */
     wxDATAVIEW_CELL_EDITABLE
 };


@@ -1112,8 +1686,9 @@ enum wxDataViewCellRenderState
     - wxDataViewBitmapRenderer,
     - wxDataViewDateRenderer,
     - wxDataViewSpinRenderer.
     - wxDataViewBitmapRenderer,
     - wxDataViewDateRenderer,
     - wxDataViewSpinRenderer.

+    - wxDataViewChoiceRenderer.

 
 

-    Additionally, the user can write own renderers by deriving from
+    Additionally, the user can write their own renderers by deriving from

     wxDataViewCustomRenderer.
 
     The ::wxDataViewCellMode and ::wxDataViewCellRenderState flags accepted
     wxDataViewCustomRenderer.
 
     The ::wxDataViewCellMode and ::wxDataViewCellRenderState flags accepted


@@ -1233,6 +1808,21 @@ public:
         editing process finished.
     */
     virtual bool Validate(wxVariant& value);
         editing process finished.
     */
     virtual bool Validate(wxVariant& value);

+
+    
+    virtual bool HasEditorCtrl() const;
+    virtual wxWindow* CreateEditorCtrl(wxWindow * parent,
+                                       wxRect labelRect,
+                                       const wxVariant& value);
+    virtual bool GetValueFromEditorCtrl(wxWindow * editor,
+                                        wxVariant& value);
+    virtual bool StartEditing( const wxDataViewItem &item, wxRect labelRect );
+    virtual void CancelEditing();
+    virtual bool FinishEditing();
+    wxWindow *GetEditorCtrl();
+
+protected:
+    wxDataViewCtrl* GetView() const;

 };
 
 
 };
 
 


@@ -1266,8 +1856,8 @@ public:
     a small icon next to it as it is typically done in a file manager.
 
     This classes uses the wxDataViewIconText helper class to store its data.
     a small icon next to it as it is typically done in a file manager.
 
     This classes uses the wxDataViewIconText helper class to store its data.

-    wxDataViewIonText can be converted to and from a wxVariant using the left shift
-    operator.
+    wxDataViewIconText can be converted to and from a wxVariant using the left
+    shift operator.

 
     @library{wxadv}
     @category{dvc}
 
     @library{wxadv}
     @category{dvc}


@@ -1351,6 +1941,63 @@ public:
 };
 
 
 };
 
 

+/**
+    A wxDataViewCtrl renderer using wxChoice control and values of strings in
+    it.
+
+    This class is used by wxDataViewCtrl to render choice controls.
+    It stores a string so that SetValue() and GetValue() operate
+    on a variant holding a string.
+
+    @see wxDataViewChoiceByIndexRenderer
+
+    @library{wxadv}
+    @category{dvc}
+*/
+
+class wxDataViewChoiceRenderer: public wxDataViewRenderer
+{
+public:
+    /**
+        The ctor.
+    */
+    wxDataViewChoiceRenderer( const wxArrayString &choices,
+                              wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE,
+                              int alignment = wxDVR_DEFAULT_ALIGNMENT );
+
+    /**
+        Returns the choice referred to by index.
+    */
+    wxString GetChoice(size_t index) const;
+
+    /**
+        Returns all choices.
+    */
+    const wxArrayString& GetChoices() const;
+};
+
+
+/**
+    A wxDataViewCtrl renderer using wxChoice control and indexes into it.
+
+    Unlike its base wxDataViewChoiceRenderer class, this one stores the choice
+    index, i.e. an @c int, in the variant used by its SetValue() and
+    GetValue().
+
+    @library{wxadv}
+    @category{dvc}
+*/
+class wxDataViewChoiceByIndexRenderer : public wxDataViewChoiceRenderer
+{
+public:
+    /**
+        The ctor.
+    */
+    wxDataViewChoiceByIndexRenderer( const wxArrayString &choices,
+                              wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE,
+                              int alignment = wxDVR_DEFAULT_ALIGNMENT );
+};
+

 
 /**
     @class wxDataViewDateRenderer
 
 /**
     @class wxDataViewDateRenderer


@@ -1400,7 +2047,7 @@ public:
     */
     wxDataViewCustomRenderer(const wxString& varianttype = "string",
                              wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
     */
     wxDataViewCustomRenderer(const wxString& varianttype = "string",
                              wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,

-                             int align = -1, bool no_init = false);
+                             int align = wxDVR_DEFAULT_ALIGNMENT);

 
     /**
         Destructor.
 
     /**
         Destructor.


@@ -1408,20 +2055,72 @@ public:
     virtual ~wxDataViewCustomRenderer();
 
     /**
     virtual ~wxDataViewCustomRenderer();
 
     /**

-        Override this to react to double clicks or ENTER.
-        This method will only be called in wxDATAVIEW_CELL_ACTIVATABLE mode.
+        Override this to react to cell @em activation. Activating a cell is an
+        alternative to showing inline editor when the value can be edited in a
+        simple way that doesn't warrant full editor control. The most typical
+        use of cell activation is toggling the checkbox in
+        wxDataViewToggleRenderer; others would be e.g. an embedded volume
+        slider or a five-star rating column.
+
+        The exact means of activating a cell are platform-dependent, but they
+        are usually similar to those used for inline editing of values.
+        Typically, a cell would be activated by Space or Enter keys or by left
+        mouse click.
+
+        This method will only be called if the cell has the
+        wxDATAVIEW_CELL_ACTIVATABLE mode.
+
+        @param cell
+            Coordinates of the activated cell's area.
+        @param model
+            The model to manipulate in response.
+        @param item
+            Activated item.
+        @param col
+            Activated column of @a item.
+        @param mouseEvent
+            If the activation was triggered by mouse click, contains the
+            corresponding event. Is @NULL otherwise (for keyboard activation).
+            Mouse coordinates are adjusted to be relative to the cell.
+
+        @since 2.9.3
+
+        @note Do not confuse this method with item activation in wxDataViewCtrl
+              and the wxEVT_DATAVIEW_ITEM_ACTIVATED event. That one is
+              used for activating the item (or, to put it differently, the
+              entire row) similarly to analogous messages in wxTreeCtrl and
+              wxListCtrl, and the effect differs (play a song, open a file
+              etc.). Cell activation, on the other hand, is all about
+              interacting with the individual cell.
+
+        @see CreateEditorCtrl()

     */
     */

-    virtual bool Activate( wxRect cell,
-                           wxDataViewModel* model,
-                           const wxDataViewItem & item,
-                           unsigned int col );
+    virtual bool ActivateCell(const wxRect& cell,
+                              wxDataViewModel* model,
+                              const wxDataViewItem & item,
+                              unsigned int col,
+                              const wxMouseEvent *mouseEvent);

 
     /**
         Override this to create the actual editor control once editing
         is about to start.
 
 
     /**
         Override this to create the actual editor control once editing
         is about to start.
 

-        @a parent is the parent of the editor control, @a labelRect indicates the
-        position and size of the editor control and @a value is its initial value:
+        This method will only be called if the cell has the
+        wxDATAVIEW_CELL_EDITABLE mode. Editing is typically triggered by slowly
+        double-clicking the cell or by a platform-dependent keyboard shortcut
+        (F2 is typical on Windows, Space and/or Enter is common elsewhere and
+        supported on Windows too).
+
+        @param parent
+            The parent of the editor control.
+        @param labelRect
+            Indicates the position and size of the editor control. The control
+            should be created in place of the cell and @a labelRect should be
+            respected as much as possible.
+        @param value
+            Initial value of the editor.
+
+        An example:

         @code
         {
             long l = value;
         @code
         {
             long l = value;


@@ -1429,10 +2128,12 @@ public:
                         labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l );
         }
         @endcode
                         labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l );
         }
         @endcode

+
+        @see ActivateCell()

     */
     */

-    virtual wxControl* CreateEditorCtrl(wxWindow* parent,
-                                        wxRect labelRect,
-                                        const wxVariant& value);
+    virtual wxWindow* CreateEditorCtrl(wxWindow* parent,
+                                       wxRect labelRect,
+                                       const wxVariant& value);

 
     /**
         Return the attribute to be used for rendering.
 
     /**
         Return the attribute to be used for rendering.


@@ -1467,7 +2168,7 @@ public:
         }
         @endcode
     */
         }
         @endcode
     */

-    virtual bool GetValueFromEditorCtrl(wxControl* editor,
+    virtual bool GetValueFromEditorCtrl(wxWindow* editor,

                                         wxVariant& value);
 
     /**
                                         wxVariant& value);
 
     /**


@@ -1477,8 +2178,9 @@ public:
     virtual bool HasEditorCtrl() const;
 
     /**
     virtual bool HasEditorCtrl() const;
 
     /**

-        Override this to react to a left click.
-        This method will only be called in @c wxDATAVIEW_CELL_ACTIVATABLE mode.
+        Override this to react to a left click.  This method will only be
+        called in @c wxDATAVIEW_CELL_ACTIVATABLE mode.  This method is
+        deprecated, please use ActivateCell instead.

     */
     virtual bool LeftClick( wxPoint cursor,
                             wxRect cell,
     */
     virtual bool LeftClick( wxPoint cursor,
                             wxRect cell,


@@ -1486,6 +2188,16 @@ public:
                             const wxDataViewItem & item,
                             unsigned int col );
 
                             const wxDataViewItem & item,
                             unsigned int col );
 

+    /**
+       Override this to react to the activation of a cell.  This method is
+       deprecated, please use ActivateCell instead.
+    */
+    virtual bool Activate(wxRect cell,
+                          wxDataViewModel * model,
+                          const wxDataViewItem & item,
+                          unsigned int col);
+
+

     /**
         Override this to render the cell.
         Before this is called, wxDataViewRenderer::SetValue was called
     /**
         Override this to render the cell.
         Before this is called, wxDataViewRenderer::SetValue was called


@@ -1505,10 +2217,17 @@ public:
     /**
         Override this to start a drag operation. Not yet supported.
     */
     /**
         Override this to start a drag operation. Not yet supported.
     */

-    virtual bool StartDrag(wxPoint cursor, wxRect cell,
+    virtual bool StartDrag(const wxPoint& cursor,
+                           const wxRect& cell,

                            wxDataViewModel* model,
                            const wxDataViewItem & item,
                            unsigned int col);
                            wxDataViewModel* model,
                            const wxDataViewItem & item,
                            unsigned int col);

+
+protected:
+    /**
+       Helper for GetSize() implementations, respects attributes.
+    */
+    wxSize GetTextExtent(const wxString& str) const;

 };
 
 
 };
 
 


@@ -1665,6 +2384,8 @@ public:
 
     @library{wxadv}
     @category{ctrl,dvc}
 
     @library{wxadv}
     @category{ctrl,dvc}

+
+    @since 2.9.0

 */
 class wxDataViewListCtrl: public wxDataViewCtrl
 {
 */
 class wxDataViewListCtrl: public wxDataViewCtrl
 {


@@ -1703,6 +2424,64 @@ public:
     const wxDataViewListStore *GetStore() const;
     //@}
 
     const wxDataViewListStore *GetStore() const;
     //@}
 

+    /**
+        Returns the position of given @e item or wxNOT_FOUND if it's
+        not a valid item.
+
+        @since 2.9.2
+     */
+    int ItemToRow(const wxDataViewItem &item) const;
+
+    /**
+        Returns the wxDataViewItem at the given @e row.
+
+        @since 2.9.2
+     */
+    wxDataViewItem RowToItem(int row) const;
+
+    //@{
+    /**
+        @name Selection handling functions
+     */
+
+    /**
+        Returns index of the selected row or wxNOT_FOUND.
+
+        @see wxDataViewCtrl::GetSelection()
+
+        @since 2.9.2
+     */
+    int GetSelectedRow() const;
+
+    /**
+        Selects given row.
+
+        @see wxDataViewCtrl::Select()
+
+        @since 2.9.2
+     */
+    void SelectRow(unsigned row);
+
+    /**
+        Unselects given row.
+
+        @see wxDataViewCtrl::Unselect()
+
+        @since 2.9.2
+     */
+    void UnselectRow(unsigned row);
+
+    /**
+        Returns true if @a row is selected.
+
+        @see wxDataViewCtrl::IsSelected()
+
+        @since 2.9.2
+     */
+    bool IsRowSelected(unsigned row) const;
+
+    //@}
+

     /**
         @name Column management functions
     */
     /**
         @name Column management functions
     */


@@ -1712,7 +2491,7 @@ public:
         Appends a column to the control and additionally appends a
         column to the store with the type string.
     */
         Appends a column to the control and additionally appends a
         column to the store with the type string.
     */

-    virtual void AppendColumn( wxDataViewColumn *column );
+    virtual bool AppendColumn( wxDataViewColumn *column );

 
     /**
         Appends a column to the control and additionally appends a
 
     /**
         Appends a column to the control and additionally appends a


@@ -1768,7 +2547,7 @@ public:
         Inserts a column to the control and additionally inserts a
         column to the store with the type string.
     */
         Inserts a column to the control and additionally inserts a
         column to the store with the type string.
     */

-    virtual void InsertColumn( unsigned int pos, wxDataViewColumn *column );
+    virtual bool InsertColumn( unsigned int pos, wxDataViewColumn *column );

 
     /**
         Inserts a column to the control and additionally inserts a
 
     /**
         Inserts a column to the control and additionally inserts a


@@ -1781,7 +2560,7 @@ public:
         Prepends a column to the control and additionally prepends a
         column to the store with the type string.
     */
         Prepends a column to the control and additionally prepends a
         column to the store with the type string.
     */

-    virtual void PrependColumn( wxDataViewColumn *column );
+    virtual bool PrependColumn( wxDataViewColumn *column );

 
     /**
         Prepends a column to the control and additionally prepends a
 
     /**
         Prepends a column to the control and additionally prepends a


@@ -1800,17 +2579,17 @@ public:
     /**
         Appends an item (=row) to the control and store.
     */
     /**
         Appends an item (=row) to the control and store.
     */

-    void AppendItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void AppendItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Prepends an item (=row) to the control and store.
     */
 
     /**
         Prepends an item (=row) to the control and store.
     */

-    void PrependItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void PrependItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Inserts an item (=row) to the control and store.
     */
 
     /**
         Inserts an item (=row) to the control and store.
     */

-    void InsertItem( unsigned int row, const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void InsertItem( unsigned int row, const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Delete the row at position @a row.
 
     /**
         Delete the row at position @a row.


@@ -1822,6 +2601,22 @@ public:
     */
     void DeleteAllItems();
 
     */
     void DeleteAllItems();
 

+    /**
+        Returns the number of items (=rows) in the control
+
+        @since 2.9.4
+    */
+    unsigned int GetItemCount() const;
+
+    /**
+        Returns the client data associated with the item.
+
+        @see SetItemData()
+
+        @since 2.9.4
+    */
+    wxUIntPtr GetItemData(const wxDataViewItem& item) const;
+

     /**
          Sets the value in the store and update the control.
     */
     /**
          Sets the value in the store and update the control.
     */


@@ -1835,7 +2630,7 @@ public:
     /**
          Sets the value in the store and update the control.
 
     /**
          Sets the value in the store and update the control.
 

-         This method assumes that the a string is stored in respective
+         This method assumes that the string is stored in respective

          column.
     */
     void SetTextValue( const wxString &value, unsigned int row, unsigned int col );
          column.
     */
     void SetTextValue( const wxString &value, unsigned int row, unsigned int col );


@@ -1843,7 +2638,7 @@ public:
     /**
          Returns the value from the store.
 
     /**
          Returns the value from the store.
 

-         This method assumes that the a string is stored in respective
+         This method assumes that the string is stored in respective

          column.
     */
     wxString GetTextValue( unsigned int row, unsigned int col ) const;
          column.
     */
     wxString GetTextValue( unsigned int row, unsigned int col ) const;


@@ -1851,7 +2646,7 @@ public:
     /**
          Sets the value in the store and update the control.
 
     /**
          Sets the value in the store and update the control.
 

-         This method assumes that the a boolean value is stored in
+         This method assumes that the boolean value is stored in

          respective column.
     */
     void SetToggleValue( bool value, unsigned int row, unsigned int col );
          respective column.
     */
     void SetToggleValue( bool value, unsigned int row, unsigned int col );


@@ -1859,11 +2654,24 @@ public:
     /**
          Returns the value from the store.
 
     /**
          Returns the value from the store.
 

-         This method assumes that the a boolean value is stored in
+         This method assumes that the boolean value is stored in

          respective column.
     */
     bool GetToggleValue( unsigned int row, unsigned int col ) const;
 
          respective column.
     */
     bool GetToggleValue( unsigned int row, unsigned int col ) const;
 

+    /**
+        Associates a client data pointer with the given item.
+
+        Notice that the control does @e not take ownership of the pointer for
+        compatibility with wxListCtrl. I.e. it will @e not delete the pointer
+        (if it is a pointer and not a number) itself, it is up to you to do it.
+
+        @see GetItemData()
+
+        @since 2.9.4
+    */
+    void SetItemData(const wxDataViewItem& item, wxUIntPtr data);
+

     //@}
 };
 
     //@}
 };
 


@@ -1888,7 +2696,10 @@ public:
 
     @library{wxadv}
     @category{ctrl,dvc}
 
     @library{wxadv}
     @category{ctrl,dvc}

-    @appearance{dataviewtreectrl.png}
+
+    @since 2.9.0
+
+    @appearance{dataviewtreectrl}

 */
 class wxDataViewTreeCtrl : public wxDataViewCtrl
 {
 */
 class wxDataViewTreeCtrl : public wxDataViewCtrl
 {


@@ -2143,7 +2954,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
         in number and type. No (default) values are filled in
         automatically.
     */

-    void AppendItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void AppendItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Prepends an item (=row) and fills it with @a values.
 
     /**
         Prepends an item (=row) and fills it with @a values.


@@ -2152,7 +2963,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
         in number and type. No (default) values are filled in
         automatically.
     */

-    void PrependItem( const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void PrependItem( const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Inserts an item (=row) and fills it with @a values.
 
     /**
         Inserts an item (=row) and fills it with @a values.


@@ -2161,7 +2972,7 @@ public:
         in number and type. No (default) values are filled in
         automatically.
     */
         in number and type. No (default) values are filled in
         automatically.
     */

-    void InsertItem(  unsigned int row, const wxVector<wxVariant> &values, wxClientData *data = NULL );
+    void InsertItem(  unsigned int row, const wxVector<wxVariant> &values, wxUIntPtr data = NULL );

 
     /**
         Delete the item (=row) at position @a pos.
 
     /**
         Delete the item (=row) at position @a pos.


@@ -2174,23 +2985,51 @@ public:
     void DeleteAllItems();
 
     /**
     void DeleteAllItems();
 
     /**

-        Overriden from wxDataViewModel
+        Returns the number of items (=rows) in the control
+
+        @since 2.9.4
+    */
+    unsigned int GetItemCount() const;
+
+    /**
+        Returns the client data associated with the item.
+
+        @see SetItemData()
+
+        @since 2.9.4
+    */
+    wxUIntPtr GetItemData(const wxDataViewItem& item) const;
+
+    /**
+        Overridden from wxDataViewModel

     */
     virtual unsigned int GetColumnCount() const;
 
     /**
     */
     virtual unsigned int GetColumnCount() const;
 
     /**

-        Overriden from wxDataViewModel
+        Overridden from wxDataViewModel

     */
     virtual wxString GetColumnType( unsigned int col ) const;
 
     /**
     */
     virtual wxString GetColumnType( unsigned int col ) const;
 
     /**

-        Overriden from wxDataViewIndexListModel
+        Sets the client data associated with the item.
+
+        Notice that this class does @e not take ownership of the passed in
+        pointer and will not delete it.
+
+        @see GetItemData()
+
+        @since 2.9.4
+    */
+    void SetItemData(const wxDataViewItem& item, wxUIntPtr data);
+
+    /**
+        Overridden from wxDataViewIndexListModel

     */
     virtual void GetValueByRow( wxVariant &value,
                            unsigned int row, unsigned int col ) const;
 
     /**
     */
     virtual void GetValueByRow( wxVariant &value,
                            unsigned int row, unsigned int col ) const;
 
     /**

-        Overriden from wxDataViewIndexListModel
+        Overridden from wxDataViewIndexListModel

     */
     virtual bool SetValueByRow( const wxVariant &value,
                            unsigned int row, unsigned int col );
     */
     virtual bool SetValueByRow( const wxVariant &value,
                            unsigned int row, unsigned int col );


@@ -2200,7 +3039,7 @@ public:
 /**
     @class wxDataViewTreeStore
 
 /**
     @class wxDataViewTreeStore
 

-    wxDataViewTreeStore is a specialised wxDataViewModel for stroing simple
+    wxDataViewTreeStore is a specialised wxDataViewModel for storing simple

     trees very much like wxTreeCtrl does and it offers a similar API.
 
     This class actually stores the entire tree and the values (therefore its name)
     trees very much like wxTreeCtrl does and it offers a similar API.
 
     This class actually stores the entire tree and the values (therefore its name)


@@ -2262,7 +3101,7 @@ public:
     int GetChildCount(const wxDataViewItem& parent) const;
 
     /**
     int GetChildCount(const wxDataViewItem& parent) const;
 
     /**

-        Returns the client data asoociated with the item.
+        Returns the client data associated with the item.

     */
     wxClientData* GetItemData(const wxDataViewItem& item) const;
 
     */
     wxClientData* GetItemData(const wxDataViewItem& item) const;
 


@@ -2392,41 +3231,43 @@ public:
 
     @beginEventTable{wxDataViewEvent}
     @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)}
 
     @beginEventTable{wxDataViewEvent}
     @event{EVT_DATAVIEW_SELECTION_CHANGED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED event.
+           Process a @c wxEVT_DATAVIEW_SELECTION_CHANGED event.

     @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)}
     @event{EVT_DATAVIEW_ITEM_ACTIVATED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_ACTIVATED event.

     @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)}
     @event{EVT_DATAVIEW_ITEM_EDITING_STARTED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EDITING_STARTED event.

     @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)}
     @event{EVT_DATAVIEW_ITEM_EDITING_DONE(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EDITING_DONE event.

     @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)}
     @event{EVT_DATAVIEW_ITEM_COLLAPSING(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING event.
+           Process a @c wxEVT_DATAVIEW_ITEM_COLLAPSING event.

     @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)}
     @event{EVT_DATAVIEW_ITEM_COLLAPSED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_COLLAPSED event.

     @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)}
     @event{EVT_DATAVIEW_ITEM_EXPANDING(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EXPANDING event.

     @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)}
     @event{EVT_DATAVIEW_ITEM_EXPANDED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_EXPANDED event.

     @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}
     @event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event.
+           Process a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED event.

     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}
     @event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event.
+           Process a @c wxEVT_DATAVIEW_ITEM_CONTEXT_MENU event.

     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}
     @event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICK event.

     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}
     @event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICKED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK event.

     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}
     @event{EVT_DATAVIEW_COLUMN_SORTED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_SORTED event.

     @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)}
     @event{EVT_DATAVIEW_COLUMN_REORDERED(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED event.
+           Process a @c wxEVT_DATAVIEW_COLUMN_REORDERED event.
+           Currently this even is only generated when using the native OSX
+           version.

     @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)}
     @event{EVT_DATAVIEW_ITEM_BEGIN_DRAG(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG event.
+           Process a @c wxEVT_DATAVIEW_ITEM_BEGIN_DRAG event.

     @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)}
     @event{EVT_DATAVIEW_ITEM_DROP_POSSIBLE(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE event.
+           Process a @c wxEVT_DATAVIEW_ITEM_DROP_POSSIBLE event.

     @event{EVT_DATAVIEW_ITEM_DROP(id, func)}
     @event{EVT_DATAVIEW_ITEM_DROP(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event.
+           Process a @c wxEVT_DATAVIEW_ITEM_DROP event.

     @event{EVT_DATAVIEW_CACHE_HINT(id, func)}
     @event{EVT_DATAVIEW_CACHE_HINT(id, func)}

-           Process a @c wxEVT_COMMAND_DATAVIEW_CACHE_HINT event.
+           Process a @c wxEVT_DATAVIEW_CACHE_HINT event.

     @endEventTable
 
     @library{wxadv}
     @endEventTable
 
     @library{wxadv}


@@ -2459,7 +3300,7 @@ public:
     wxDataViewModel* GetModel() const;
 
     /**
     wxDataViewModel* GetModel() const;
 
     /**

-        Returns a the position of a context menu event in screen coordinates.
+        Returns the position of a context menu event in screen coordinates.

     */
     wxPoint GetPosition() const;
 
     */
     wxPoint GetPosition() const;
 


@@ -2468,13 +3309,33 @@ public:
     */
     const wxVariant& GetValue() const;
 
     */
     const wxVariant& GetValue() const;
 

+    /**
+        Can be used to determine whether the new value is going to be accepted
+        in wxEVT_DATAVIEW_ITEM_EDITING_DONE handler.
+
+        Returns @true if editing the item was cancelled or if the user tried to
+        enter an invalid value (refused by wxDataViewRenderer::Validate()). If
+        this method returns @false, it means that the value in the model is
+        about to be changed to the new one.
+
+        Notice that wxEVT_DATAVIEW_ITEM_EDITING_DONE event handler can
+        call wxNotifyEvent::Veto() to prevent this from happening.
+
+        Currently support for setting this field and for vetoing the change is
+        only available in the generic version of wxDataViewCtrl, i.e. under MSW
+        but not GTK nor OS X.
+
+        @since 2.9.3
+     */
+    bool IsEditCancelled() const;
+

     /**
         Sets the column index associated with this event.
     */
     void SetColumn(int col);
 
     /**
     /**
         Sets the column index associated with this event.
     */
     void SetColumn(int col);
 
     /**

-        For wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only.
+        For @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICK only.

     */
     void SetDataViewColumn(wxDataViewColumn* col);
 
     */
     void SetDataViewColumn(wxDataViewColumn* col);
 


@@ -2493,41 +3354,55 @@ public:
     */
     void SetDataObject( wxDataObject *obj );
 
     */
     void SetDataObject( wxDataObject *obj );
 

-    /**
-        Used internally. Gets associated wxDataObject for data transfer
-        within a drag operation.
-    */
-    wxDataObject *GetDataObject() const;
-
-    /**
-        Used internally. Sets the wxDataFormat during a drop operation.
-    */
-    void SetDataFormat( const wxDataFormat &format );
-

     /**
         Gets the wxDataFormat during a drop operation.
     */
     wxDataFormat GetDataFormat() const;
 
     /**
     /**
         Gets the wxDataFormat during a drop operation.
     */
     wxDataFormat GetDataFormat() const;
 
     /**

-        Used internally. Sets the data size for a drop data transfer.
+        Gets the data size for a drop data transfer.

     */
     */

-    void SetDataSize( size_t size );
+    size_t GetDataSize() const;

 
     /**
 
     /**

-        Gets the data size for a drop data transfer.
+        Gets the data buffer for a drop data transfer.

     */
     */

-    size_t GetDataSize() const;
+    void *GetDataBuffer() const;

 
     /**
 
     /**

-        Used internally. Sets the data buffer for a drop data transfer.
+        Specify the kind of the drag operation to perform.
+
+        This method can be used inside a wxEVT_DATAVIEW_ITEM_BEGIN_DRAG
+        handler in order to configure the drag operation. Valid values are
+        ::wxDrag_CopyOnly (default), ::wxDrag_AllowMove (allow the data to be
+        moved) and ::wxDrag_DefaultMove.
+
+        Currently it is only honoured by the generic version of wxDataViewCtrl
+        (used e.g. under MSW) and not supported by the native GTK and OS X
+        versions.
+
+        @see GetDropEffect()
+
+        @since 2.9.4

     */
     */

-    void SetDataBuffer( void* buf );
+    void SetDragFlags(int flags);

 
     /**
 
     /**

-        Gets the data buffer for a drop data transfer.
+        Returns the effect the user requested to happen to the dropped data.
+
+        This function can be used inside
+        wxEVT_DATAVIEW_ITEM_DROP_POSSIBLE and
+        wxEVT_DATAVIEW_ITEM_DROP handlers and returns whether the user
+        is trying to copy (the return value is ::wxDragCopy) or move (if the
+        return value is ::wxDragMove) the data.
+
+        Currently this is only available when using the generic version of
+        wxDataViewCtrl (used e.g. under MSW) and always returns ::wxDragNone in
+        the GTK and OS X native versions.
+
+        @since 2.9.4

     */
     */

-    void *GetDataBuffer() const;
+    wxDragResult GetDropEffect() const;

 
     /**
         Return the first row that will be displayed.
 
     /**
         Return the first row that will be displayed.


@@ -2538,5 +3413,21 @@ public:
         Return the last row that will be displayed.
     */
     int GetCacheTo() const;
         Return the last row that will be displayed.
     */
     int GetCacheTo() const;

+
+
+
+    
+    wxDataViewItem GetItem() const;
+    void SetItem( const wxDataViewItem &item );
+    void SetEditCanceled(bool editCancelled);
+    void SetPosition( int x, int y );
+    void SetCache(int from, int to);
+    wxDataObject *GetDataObject() const;
+    void SetDataFormat( const wxDataFormat &format );
+    void SetDataSize( size_t size );
+    void SetDataBuffer( void* buf );
+    int GetDragFlags() const;
+    void SetDropEffect( wxDragResult effect );
+

 };
 
 };