\section{Alphabetical functions and macros list}\label{functionsalphabetically}
\helpref{CLASSINFO}{classinfo}\\
-\helpref{copystring}{copystring}\\
\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
\helpref{DECLARE\_APP}{declareapp}\\
\helpref{DECLARE\_CLASS}{declareclass}\\
\helpref{IMPLEMENT\_CLASS}{implementclass}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{wxAboutBox}{wxaboutbox}\\
\helpref{wxASSERT}{wxassert}\\
\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
\helpref{wxASSERT\_MSG}{wxassertmsg}\\
\helpref{wxEndBusyCursor}{wxendbusycursor}\\
\helpref{wxENTER\_CRIT\_SECT}{wxentercritsect}\\
\helpref{wxEntry}{wxentry}\\
+\helpref{wxEntryStart}{wxentrystart}\\
+\helpref{wxEntryCleanup}{wxentrycleanup}\\
\helpref{wxEnumClipboardFormats}{wxenumclipboardformats}\\
\helpref{wxError}{wxerror}\\
\helpref{wxExecute}{wxexecute}\\
\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
\helpref{wxFinite}{wxfinite}\\
+\helpref{wxGenericAboutBox}{wxgenericaboutbox}\\
\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
\helpref{wxGetApp}{wxgetapp}\\
\helpref{wxGetBatteryState}{wxgetbatterystate}\\
\helpref{wxGetDisplayName}{wxgetdisplayname}\\
\helpref{wxGetDisplaySize}{wxdisplaysize}\\
\helpref{wxGetDisplaySizeMM}{wxdisplaysizemm}\\
-\helpref{wxGetElapsedTime}{wxgetelapsedtime}\\
\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
\helpref{wxGetEnv}{wxgetenv}\\
\helpref{wxGetFileKind}{wxgetfilekind}\\
\helpref{wxGetMousePosition}{wxgetmouseposition}\\
\helpref{wxGetMouseState}{wxgetmousestate}\\
\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
-\helpref{wxGetMultipleChoice}{wxgetmultiplechoice}\\
\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
\helpref{wxGetOsDescription}{wxgetosdescription}\\
\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
\helpref{wxGetProcessId}{wxgetprocessid}\\
-\helpref{wxGetResource}{wxgetresource}\\
\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
\helpref{wxIsEmpty}{wxisempty}\\
\helpref{wxIsMainThread}{wxismainthread}\\
\helpref{wxIsNaN}{wxisnan}\\
+\helpref{wxIsPlatformLittleEndian}{wxisplatformlittleendian}\\
+\helpref{wxIsPlatform64Bit}{wxisplatform64bit}\\
\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxJoin}{wxjoin}\\
\helpref{wxKill}{wxkill}\\
\helpref{wxLaunchDefaultBrowser}{wxlaunchdefaultbrowser}\\
\helpref{wxLEAVE\_CRIT\_SECT}{wxleavecritsect}\\
\helpref{wxShutdown}{wxshutdown}\\
\helpref{wxSleep}{wxsleep}\\
\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplit}{wxsplit}\\
\helpref{wxSplitPath}{wxsplitfunction}\\
-\helpref{wxStartTimer}{wxstarttimer}\\
\helpref{wxStaticCast}{wxstaticcast}\\
\helpref{wxStrcmp}{wxstrcmp}\\
\helpref{wxStricmp}{wxstricmp}\\
\helpref{wxStringTokenize}{wxstringtokenize}\\
\helpref{wxStripMenuCodes}{wxstripmenucodes}\\
\helpref{wxStrlen}{wxstrlen}\\
+\helpref{wxSTRINGIZE}{wxstringize}\\
+\helpref{wxSTRINGIZE\_T}{wxstringizet}\\
\helpref{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}{wxsuppressgccprivatedtorwarning}\\
\helpref{wxSysErrorCode}{wxsyserrorcode}\\
\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
\helpref{wxVaCopy}{wxvacopy}\\
\helpref{wxVsnprintf}{wxvsnprintf}\\
\helpref{wxWakeUpIdle}{wxwakeupidle}\\
-\helpref{wxWriteResource}{wxwriteresource}\\
\helpref{wxYield}{wxyield}\\
\helpref{wx\_const\_cast}{wxconstcastraw}\\
\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}\\
\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
-\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor}}
Returns $1$ if the compiler being used to compile the code is GNU C++
-compiler (g++) version major.minor.release or greater. Otherwise, and also if
+compiler (g++) version major.minor or greater. Otherwise, and also if
the compiler is not GNU C++ at all, returns $0$.
\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
-\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor, release}}
+\func{bool}{wxCHECK\_W32API\_VERSION}{\param{}{major, minor, release}}
Returns $1$ if the version of w32api headers used is major.minor.release or
greater. Otherwise, and also if we are not compiling with mingw32/cygwin under
\membersection{::wxEntry}\label{wxentry}
-This initializes wxWidgets in a platform-dependent way. Use this if you
-are not using the default wxWidgets entry code (e.g. main or WinMain). For example,
-you can initialize wxWidgets from an Microsoft Foundation Classes application using
+This initializes wxWidgets in a platform-dependent way. Use this if you are not
+using the default wxWidgets entry code (e.g. main or WinMain). For example, you
+can initialize wxWidgets from an Microsoft Foundation Classes application using
this function.
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = true}}
+The following overload of wxEntry is available under all platforms:
-wxWidgets initialization under Windows (non-DLL). If {\it enterLoop} is false, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWidgets
-message loop will be entered.
+\func{int}{wxEntry}{\param{int\&}{ argc}, \param{wxChar **}{argv}}
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+Under MS Windows, an additional overload suitable for calling from
+\texttt{WinMain} is available:
-wxWidgets initialization under Windows (for applications constructed as a DLL).
+\func{int}{wxEntry}{\param{HINSTANCE }{hInstance}, \param{HINSTANCE }{hPrevInstance = \NULL}, \param{char *}{pCmdLine = \NULL}, \param{int }{nCmdShow = \texttt{SW\_SHOWNORMAL}}}
-\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
+(notice that under Windows CE platform, and only there, the type of
+\arg{pCmdLine} is \texttt{wchar\_t *}, otherwise it is \texttt{char *}, even in
+Unicode build).
-wxWidgets initialization under Unix.
+\wxheading{See also}
+
+\helpref{wxEntryStart}{wxentrystart}
\wxheading{Remarks}
+\membersection{::wxEntryCleanup}\label{wxentrycleanup}
+
+\func{void}{wxEntryCleanup}{\void}
+
+Free resources allocated by a successful call to \helpref{wxEntryStart}{wxentrystart}.
+
+\wxheading{Include files}
+
+<wx/init.h>
+
+
+\membersection{::wxEntryStart}\label{wxentrystart}
+
+\func{bool}{wxEntryStart}{\param{int\&}{ argc}, \param{wxChar **}{argv}}
+
+This function can be used to perform the initialization of wxWidgets if you
+can't use the default initialization code for any reason.
+
+If the function returns \true, the initialization was successful and the global
+\helpref{wxApp}{wxapp} object \texttt{wxTheApp} has been created. Moreover,
+\helpref{wxEntryCleanup}{wxentrycleanup} must be called afterwards. If the
+function returns \false, a catastrophic initialization error occured and (at
+least the GUI part of) the library can't be used at all.
+
+Notice that parameters \arg{argc} and \arg{argv} may be modified by this
+function.
+
+\wxheading{Include files}
+
+<wx/init.h>
+
+
\membersection{::wxGetApp}\label{wxgetapp}
\func{wxAppDerivedClass\&}{wxGetApp}{\void}
\wxheading{Include files}
-<wx/event.h>
+<wx/app.h>
kill this process as well as all of its children (except those which have
started their own session).
+The {\tt wxEXEC\_NOEVENTS} flag prevents processing of any events from taking
+place while the child process is running. It should be only used for very
+short-lived processes as otherwise the application windows risk becoming
+unresponsive from the users point of view. As this flag only makes sense with
+{\tt wxEXEC\_SYNC}, {\tt wxEXEC\_BLOCK} equal to the sum of both of these flags
+is provided as a convenience.
+
Finally, you may use the third overloaded version of this function to execute
a process (always synchronously, the contents of \arg{flags} is or'd with
\texttt{wxEXEC\_SYNC}) and capture its output in the array \arg{output}. The
<wx/app.h>
+\membersection{::wxJoin}\label{wxjoin}
+
+\func{wxString}{wxJoin}{\param{const wxArrayString\&}{ arr}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '$\backslash$'}}
+
+Concatenate all lines of the given \helpref{wxArrayString}{wxarraystring} object using the separator \arg{sep} and returns
+the result as a \helpref{wxString}{wxstring}.
+
+If the \arg{escape} character is non-\NULL, then it's used as prefix for each occurrence of \arg{sep}
+in the strings contained in \arg{arr} before joining them which is necessary
+in order to be able to recover the original array contents from the string
+later using \helpref{wxSplit}{wxsplit}.
+
+\wxheading{Include files}
+
+<wx/arrstr.h>
+
+
\membersection{::wxKill}\label{wxkill}
\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}, \param{int }{flags = 0}}
This function shuts down or reboots the computer depending on the value of the
{\it flags}. Please notice that doing this requires the corresponding access
-rights (superuser under Unix, {\tt SE\_SHUTDOWN} privelege under Windows NT)
+rights (superuser under Unix, {\tt SE\_SHUTDOWN} privilege under Windows NT)
and that this function is only implemented under Unix and Win32.
\wxheading{Parameters}
Returns time of last modification of given file.
-The return value is $0$ if an error occured (e.g. file not found).
+The function returns \texttt{(time\_t)}$-1$ if an error occurred (e.g. file not
+found).
\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
\wxheading{Portability}
-This function is implemented for Win32,
-Mac OS and generic Unix provided the system has {\tt statfs()} function.
+The generic Unix implementation depends on the system having
+the \texttt{statfs()} or \texttt{statvfs()} function.
This function first appeared in wxWidgets 2.3.2.
\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
-Returns true if the path exists.
+Returns true if \arg{dirname} exists and is a directory.
\membersection{::wxPathOnly}\label{wxpathonly}
\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
Copies {\it file1} to {\it file2}, returning true if successful. If
-{\it overwrite} parameter is true (default), the destination file is overwritten
-if it exists, but if {\it overwrite} is false, the functions fails in this
+{\it overwrite} parameter is \true (default), the destination file is overwritten
+if it exists, but if {\it overwrite} is \false, the functions fails in this
case.
+This function supports resources forks under Mac OS.
+
\membersection{::wxGetCwd}\label{wxgetcwd}
Makes the directory \arg{dir}, returning true if successful.
{\it perm} is the access mask for the directory for the systems on which it is
-supported (Unix) and doesn't have effect for the other ones.
+supported (Unix) and doesn't have any effect on the other ones.
\membersection{::wxParseCommonDialogsFilter}\label{wxparsecommondialogsfilter}
\membersection{::wxRenameFile}\label{wxrenamefile}
-\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
+\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
Renames \arg{file1} to \arg{file2}, returning true if successful.
+If \arg{overwrite} parameter is true (default), the destination file is
+overwritten if it exists, but if \arg{overwrite} is false, the functions fails
+in this case.
+
\membersection{::wxRmdir}\label{wxrmdir}
The {\it flags} parameter is reserved for future use.
+Please notice that there is also a wxRmDir() function which simply wraps the
+standard POSIX rmdir() function and so return an integer error code instead of
+a boolean value (but otherwise is currently identical to wxRmdir), don't
+confuse these two functions.
+
\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+\membersection{::wxSplit}\label{wxsplit}
+
+\func{wxArrayString}{wxSplit}{\param{const wxString\&}{ str}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '\\'}}
+
+Splits the given \helpref{wxString}{wxstring} object using the separator \arg{sep} and returns the
+result as a \helpref{wxArrayString}{wxarraystring}.
+
+If the \arg{escape} character is non-\NULL, then the occurrences of \arg{sep} immediately prefixed
+with \arg{escape} are not considered as separators.
+
+Note that empty tokens will be generated if there are two or more adjacent separators.
+
+\wxheading{See also}
+
+\helpref{wxJoin}{wxjoin}
+
+\wxheading{Include files}
+
+<wx/arrstr.h>
+
+
\membersection{::wxSplitPath}\label{wxsplitfunction}
\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
\membersection{::wxGetOsVersion}\label{wxgetosversion}
-\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+\func{wxOperatingSystemId}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
-Gets operating system version information.
+Gets the version and the operating system ID for currently running OS.
+See \helpref{wxPlatformInfo}{wxplatforminfo} for more details about wxOperatingSystemId.
-\begin{twocollist}\itemsep=0pt
-\twocolitemruled{Platform}{Return types}
-\twocolitem{Mac OS}{Return value is wxMAC when compiled with CodeWarrior under Mac OS 8.x/9.x and Mac OS X, wxMAC\_DARWIN when compiled with the Apple Developer Tools under Mac OS X.
-
-Both {\it major} and {\it minor} have to be looked at as hexadecimal numbers. So System 10.2.4 returns 0x10, resp 16 for {\it major} and 0x24, resp 36 for {\it minor}. }
-\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
-\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
-\twocolitem{OS/2}{Return value is wxOS2\_PM.}
-\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}.}
-\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
-\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
-\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows PocketPC}{Return value is wxWINDOWS\_POCKETPC, version is returned in {\it major} and {\it minor}.}
-\twocolitem{Windows Smartphone}{Return value is wxWINDOWS\_SMARTPHONE, version is returned in {\it major} and {\it minor}.}
-\twocolitem{Windows CE (non-specific)}{Return value is wxWINDOWS\_CE, version is returned in {\it major} and {\it minor}.}
-\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
-\end{twocollist}
+\wxheading{See also}
+
+\helpref{::wxGetOsDescription}{wxgetosdescription},
+\helpref{wxPlatformInfo}{wxplatforminfo}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxIsPlatformLittleEndian}\label{wxisplatformlittleendian}
+
+\func{bool}{wxIsPlatformLittleEndian}{\void}
+
+Returns \true if the current platform is little endian (instead of big endian).
+The check is performed at run-time.
\wxheading{See also}
-\helpref{::wxGetOsDescription}{wxgetosdescription}
+\helpref{Byte order macros}{byteordermacros}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxIsPlatform64Bit}\label{wxisplatform64bit}
+
+\func{bool}{wxIsPlatform64Bit}{\void}
+
+Returns \true if the operating system the program is running under is 64 bit.
+The check is performed at run-time and may differ from the value available at
+compile-time (at compile-time you can just check if {\tt sizeof(void*)==8})
+since the program could be running in emulation mode or in a mixed 32/64 bit system
+(bi-architecture operating system).
+
+Very important: this function is not 100\% reliable on some systems given the fact
+that there isn't always a standard way to do a reliable check on the OS architecture.
\wxheading{Include files}
\section{String functions}\label{stringfunctions}
-
-\membersection{::copystring}\label{copystring}
-
-\func{char *}{copystring}{\param{const char *}{s}}
-
-Makes a copy of the string {\it s} using the C++ new operator, so it can be
-deleted with the {\it delete} operator.
-
-This function is deprecated, use \helpref{wxString}{wxstring} class instead.
-
-
\membersection{::wxGetTranslation}\label{wxgettranslation}
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str},
+ \param{const wxString\& }{domain = wxEmptyString}}
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}, \param{const char * }{strPlural}, \param{size\_t }{n}}
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str}, \param{const wxString\& }{strPlural}, \param{size\_t }{n},
+ \param{const wxString\& }{domain = wxEmptyString}}
This function returns the translation of string {\it str} in the current
\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
message catalogs (see \helpref{internationalization overview}{internationalization}), the
original string is returned. In debug build, an error message is logged -- this
-should help to find the strings which were not yet translated. As this function
+should help to find the strings which were not yet translated. If
+{\it domain} is specified then only that domain/catalog is searched
+for a matching string. As this function
is used very often, an alternative (and also common in Unix world) syntax is
provided: the \helpref{\_()}{underscore} macro is defined to do the same thing
as wxGetTranslation.
The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list }
argument instead of arbitrary number of parameters.
+Note that if \texttt{wxUSE\_PRINTF\_POS\_PARAMS} is set to 1, then this function supports
+positional arguments (see \helpref{wxString::Printf}{wxstringprintf} for more information).
+However other functions of the same family (wxPrintf, wxSprintf, wxFprintf, wxVfprintf,
+wxVfprintf, wxVprintf, wxVsprintf) currently do not to support positional parameters
+even when \texttt{wxUSE\_PRINTF\_POS\_PARAMS} is 1.
+
\wxheading{See also}
\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
\membersection{\_}\label{underscore}
-\func{const wxChar *}{\_}{\param{const char *}{s}}
+\func{const wxString\&}{\_}{\param{const wxString\&}{s}}
This macro expands into a call to \helpref{wxGetTranslation}{wxgettranslation}
function, so it marks the message for the extraction by {\tt xgettext} just as
\membersection{wxPLURAL}\label{wxplural}
-\func{const wxChar *}{wxPLURAL}{\param{const char *}{sing}, \param{const char *}{plur}, \param{size\_t}{n}}
+\func{const wxString\&}{wxPLURAL}{\param{const wxString\&}{sing}, \param{const wxString\&}{plur}, \param{size\_t}{n}}
This macro is identical to \helpref{\_()}{underscore} but for the plural variant
of \helpref{wxGetTranslation}{wxgettranslation}.
the front when the dialog box is popped up.
+\membersection{::wxAboutBox}\label{wxaboutbox}
+
+\func{void}{wxAboutBox}{\param{const wxAboutDialogInfo\& }{info}}
+
+This function shows the standard about dialog containing the information
+specified in \arg{info}. If the current platform has a native about dialog
+which is capable of showing all the fields in \arg{info}, the native dialog is
+used, otherwise the function falls back to the generic wxWidgets version of the
+dialog, i.e. does the same thing as \helpref{wxGenericAboutBox()}{wxgenericaboutbox}.
+
+Here is an example of how this function may be used:
+\begin{verbatim}
+void MyFrame::ShowSimpleAboutDialog(wxCommandEvent& WXUNUSED(event))
+{
+ wxAboutDialogInfo info;
+ info.SetName(_("My Program"));
+ info.SetVersion(_("1.2.3 Beta"));
+ info.SetDescription(_("This program does something great."));
+ info.SetCopyright(_T("(C) 2007 Me <my@email.addre.ss>"));
+
+ wxAboutBox(info);
+}
+\end{verbatim}
+
+Please see the \helpref{dialogs sample}{sampledialogs} for more examples of
+using this function and \helpref{wxAboutDialogInfo}{wxaboutdialoginfo} for the
+description of the information which can be shown in the about dialog.
+
+\wxheading{Include files}
+
+<wx/aboutdlg.h>
+
+
\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
If path is empty, the current directory will be used. If filename is empty,
no default filename will be supplied. The wildcard determines what files
are displayed in the file selector, and file extension supplies a type
-extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT or wxFILE\_MUST\_EXIST. Note that wxMULTIPLE
+extension for the required filename. Flags may be a combination of wxFD\_OPEN,
+wxFD\_SAVE, wxFD\_OVERWRITE\_PROMPT or wxFD\_FILE\_MUST\_EXIST. Note that wxFD\_MULTIPLE
can only be used with \helpref{wxFileDialog}{wxfiledialog} and not here as this
function only returns a single file name.
<wx/utils.h>
+\membersection{::wxGenericAboutBox}\label{wxgenericaboutbox}
+
+\func{void}{wxGenericAboutBox}{\param{const wxAboutDialogInfo\& }{info}}
+
+This function does the same thing as \helpref{wxAboutBox}{wxaboutbox} except
+that it always uses the generic wxWidgets version of the dialog instead of the
+native one. This is mainly useful if you need to customize the dialog by e.g.
+adding custom controls to it (customizing the native dialog is not currently
+supported).
+
+See the \helpref{dialogs sample}{sampledialogs} for an example of about dialog
+customization.
+
+\wxheading{See also}
+
+\helpref{wxAboutDialogInfo}{wxaboutdialoginfo}
+
+\wxheading{Include files}
+
+<wx/aboutdlg.h>\\
+<wx/generic/aboutdlgg.h>
+
+
\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}, \param{const wxString\& }{caption = wxEmptyString}}
Shows the colour selection dialog and returns the colour selected by user or
-invalid colour (use \helpref{wxColour::Ok}{wxcolourok} to test whether a colour
+invalid colour (use \helpref{wxColour:IsOk}{wxcolourisok} to test whether a colour
is valid) if the dialog was cancelled.
\wxheading{Parameters}
\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}, \param{const wxString\& }{caption = wxEmptyString}}
Shows the font selection dialog and returns the font selected by user or
-invalid font (use \helpref{wxFont::Ok}{wxfontok} to test whether a font
+invalid font (use \helpref{wxFont:IsOk}{wxfontisok} to test whether a font
is valid) if the dialog was cancelled.
\wxheading{Parameters}
<wx/textdlg.h>
-\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
-
-\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{int }{nsel}, \param{int *}{selection},
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
-
-Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
-listbox. The user may choose one or more item(s) and press OK or Cancel.
-
-The number of initially selected choices, and array of the selected indices,
-are passed in; this array will contain the user selections on exit, with
-the function returning the number of selections. {\it selection} must be
-as big as the number of choices, in case all are selected.
-
-If Cancel is pressed, -1 is returned.
-
-{\it choices} is an array of {\it n} strings for the listbox.
-
-If {\it centre} is true, the message text (which may include new line characters)
-is centred; if false, the message is left-justified.
-
-\wxheading{Include files}
-
-<wx/choicdlg.h>
-
-
\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
this language feature but still take advantage of it when it is available.
+
\membersection{::wxGetKeyState}\label{wxgetkeystate}
\func{bool}{wxGetKeyState}{\param{wxKeyCode }{key}}
\func{long}{wxNewId}{\void}
+This function is deprecated as the ids generated by it can conflict with the
+ids defined by the user code, use \texttt{wxID\_ANY} to assign ids which are
+guaranteed to not conflict with the user-defined ids for the controls and menu
+items you create instead of using this function.
+
+
Generates an integer identifier unique to this run of the program.
\wxheading{Include files}
\func{wxWindow *}{wxGetActiveWindow}{\void}
-Gets the currently active window (Windows only).
+Gets the currently active window (implemented for MSW and GTK only currently,
+always returns \NULL in the other ports).
\wxheading{Include files}
-<wx/windows.h>
+<wx/window.h>
\membersection{::wxGetBatteryState}\label{wxgetbatterystate}
\texttt{wxBATTERY\_LOW\_STATE}, \texttt{wxBATTERY\_CRITICAL\_STATE},
\texttt{wxBATTERY\_SHUTDOWN\_STATE} or \texttt{wxBATTERY\_UNKNOWN\_STATE}.
\texttt{wxBATTERY\_UNKNOWN\_STATE} is also the default on platforms where
-this feature is not implemented.
+this feature is not implemented (currently everywhere but MS Windows).
\wxheading{Include files}
Returns the type of power source as one of \texttt{wxPOWER\_SOCKET},
\texttt{wxPOWER\_BATTERY} or \texttt{wxPOWER\_UNKNOWN}.
\texttt{wxPOWER\_UNKNOWN} is also the default on platforms where this
-feature is not implemented.
+feature is not implemented (currently everywhere but MS Windows).
\wxheading{Include files}
void SetLeftDown(bool down);
void SetMiddleDown(bool down);
void SetRightDown(bool down);
-
+
void SetControlDown(bool down);
void SetShiftDown(bool down);
void SetAltDown(bool down);
\end{verbatim}
-\membersection{::wxGetResource}\label{wxgetresource}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long *}{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int *}{value}, \param{const wxString\& }{file = NULL}}
-
-Gets a resource value from the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
-
-Under X, if an application class (wxApp::GetClassName) has been defined,
-it is appended to the string /usr/lib/X11/app-defaults/ to try to find
-an applications default file when merging all resource databases.
-
-The reason for passing the result in an argument is that it
-can be convenient to define a default value, which gets overridden
-if the value exists in the resource file. It saves a separate
-test for that resource's existence, and it also allows
-the overloading of the function for different types.
-
-See also \helpref{wxWriteResource}{wxwriteresource}, \helpref{wxConfigBase}{wxconfigbase}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{::wxGetStockLabel}\label{wxgetstocklabel}
Open the \arg{url} in user's default browser. If \arg{flags} parameter contains
\texttt{wxBROWSER\_NEW\_WINDOW} flag, a new window is opened for the URL
-(currently this is only supported under Windows).
+(currently this is only supported under Windows). The \arg{url} may also be a
+local file path (with or without \texttt{file://} prefix), if it doesn't
+correspond to an existing file and the URL has no scheme \texttt{http://} is
+prepended to it by default.
Returns \true if the application was successfully launched.
+Note that for some configurations of the running user, the application which
+is launched to open the given URL may be URL-dependent (e.g. a browser may be used for
+local URLs while another one may be used for remote URLs).
+
\wxheading{Include files}
<wx/utils.h>
\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
-\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
+\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{str}, \param{int }{flags = wxStrip\_All}}
-\func{void}{wxStripMenuCodes}{\param{char *}{in}, \param{char *}{out}}
+Strips any menu codes from \arg{str} and returns the result.
-{\bf NB:} This function is obsolete, please use
-\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} instead.
-
-Strips any menu codes from {\it in} and places the result
-in {\it out} (or returns the new string, in the first form).
+By default, the functions strips both the mnemonics character (\texttt{'\&'})
+which is used to indicate a keyboard shortkey, and the accelerators, which are
+used only in the menu items and are separated from the main text by the
+\texttt{$\backslash$t} (TAB) character. By using \arg{flags} of
+\texttt{wxStrip\_Mnemonics} or \texttt{wxStrip\_Accel} to strip only the former
+or the latter part, respectively.
-Menu codes include \& (mark the next character with an underline
-as a keyboard shortkey in Windows and Motif) and $\backslash$t (tab in Windows).
+Notice that in most cases
+\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} or
+\helpref{wxControl::GetLabelText}{wxcontrolgetlabeltext} can be used instead.
\wxheading{Include files}
<wx/utils.h>
+\membersection{wxSTRINGIZE}\label{wxstringize}
+
+\func{}{wxSTRINGIZE}{\param{}{x}}
+
+Returns the string representation of the given symbol which can be either a
+literal or a macro (hence the advantage of using this macro instead of the
+standard preprocessor \texttt{\#} operator which doesn't work with macros).
+
+Notice that this macro always produces a \texttt{char} string, use
+\helpref{wxSTRINGIZE\_T}{wxstringizet} to build a wide string Unicode build.
+
+\wxheading{See also}
+
+\helpref{wxCONCAT}{wxconcat}
+
+
+\membersection{wxSTRINGIZE\_T}\label{wxstringizet}
+
+\func{}{wxSTRINGIZE\_T}{\param{}{x}}
+
+Returns the string representation of the given symbol as either an ASCII or
+Unicode string, depending on the current build. This is the Unicode-friendly
+equivalent of \helpref{wxSTRINGIZE}{wxstringize}.
+
+
\membersection{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}\label{wxsuppressgccprivatedtorwarning}
\func{}{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}{\param{}{name}}
\texttt{va\_end}.
-\membersection{::wxWriteResource}\label{wxwriteresource}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long }{value}, \param{const wxString\& }{file = NULL}}
-
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int }{value}, \param{const wxString\& }{file = NULL}}
-
-Writes a resource value into the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
-
-Under X, the resource databases are cached until the internal function
-\rtfsp{\bf wxFlushResources} is called automatically on exit, when
-all updated resource databases are written to their files.
-
-Note that it is considered bad manners to write to the .Xdefaults
-file under Unix, although the WIN.INI file is fair game under Windows.
-
-See also \helpref{wxGetResource}{wxgetresource}, \helpref{wxConfigBase}{wxconfigbase}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
\membersection{\_\_WXFUNCTION\_\_}\label{wxfunction}
This macro is equivalent to {\tt wxDynamicCast(this, classname)} but the
latter provokes spurious compilation warnings from some compilers (because it
-tests whether {\tt this} pointer is non {\tt NULL} which is always true), so
+tests whether {\tt this} pointer is non-{\tt NULL} which is always true), so
this macro should be used to avoid them.
\wxheading{See also}
\section{Time functions}\label{timefunctions}
-The functions in this section deal with getting the current time and
-starting/stopping the global timers. Please note that the timer functions are
-deprecated because they work with one global timer only and
-\helpref{wxTimer}{wxtimer} and/or \helpref{wxStopWatch}{wxstopwatch} classes
-should be used instead. For retrieving the current time, you may also use
-\helpref{wxDateTime::Now}{wxdatetimenow} or
-\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
-
-
-\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
-
-\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = true}}
-
-Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
-
-If {\it resetTimer} is true (the default), the timer is reset to zero
-by this call.
-
-See also \helpref{wxTimer}{wxtimer}.
-
-\wxheading{Include files}
-
-<wx/timer.h>
+The functions in this section deal with getting the current time and sleeping
+for the specified time interval.
\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxGetUTCTime}\label{wxgetutctime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
\membersection{::wxMicroSleep}\label{wxmicrosleep}
<wx/utils.h>
-\membersection{::wxStartTimer}\label{wxstarttimer}
-
-\func{void}{wxStartTimer}{\void}
-
-Starts a stopwatch; use \helpref{::wxGetElapsedTime}{wxgetelapsedtime} to get the elapsed time.
-
-See also \helpref{wxTimer}{wxtimer}.
-
-\wxheading{Include files}
-
-<wx/timer.h>
-
-
\membersection{::wxUsleep}\label{wxusleep}
\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
\membersection{::wxOnAssert}\label{wxonassert}
-\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{cond}, \param{const char *}{msg = NULL}}
+\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{func}, \param{const char *}{cond}, \param{const char *}{msg = NULL}}
This function is called whenever one of debugging macros fails (i.e. condition
is false in an assertion). It is only defined in the debug mode, in release
To override the default behaviour in the debug builds which is to show the user
a dialog asking whether he wants to abort the program, continue or continue
ignoring any subsequent assert failures, you may override
-\helpref{wxApp::OnAssert}{wxapponassert} which is called by this function if
+\helpref{wxApp::OnAssertFailure}{wxapponassertfailure} which is called by this function if
the global application object exists.
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
-This macro may be only used in non void functions, see also
+This macro may be only used in non-void functions, see also
\helpref{wxCHECK\_RET}{wxcheckret}.
projects / wxWidgets.git / blobdiff