+#define wxDIALOG_UNIT_COMPATIBILITY 0
+
+// ----------------------------------------------------------------------------
+// debugging settings
+// ----------------------------------------------------------------------------
+
+// Generic comment about debugging settings: they are very useful if you don't
+// use any other memory leak detection tools such as Purify/BoundsChecker, but
+// are probably redundant otherwise. Also, Visual C++ CRT has the same features
+// as wxWidgets memory debugging subsystem built in since version 5.0 and you
+// may prefer to use it instead of built in memory debugging code because it is
+// faster and more fool proof.
+//
+// Using VC++ CRT memory debugging is enabled by default in debug mode
+// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// and if __NO_VC_CRTDBG__ is not defined.
+
+// If 1, enables wxDebugContext, for writing error messages to file, etc. If
+// __WXDEBUG__ is not defined, will still use the normal memory operators.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_CONTEXT 0
+
+// If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
+// __WXDEBUG__ is also defined.
+//
+// WARNING: this code may not work with all architectures, especially if
+// alignment is an issue. This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 1 if you are not using a memory debugging tool, else 0
+#define wxUSE_MEMORY_TRACING 0
+
+// In debug mode, cause new and delete to be redefined globally.
+// If this causes problems (e.g. link errors which is a common problem
+// especially if you use another library which also redefines the global new
+// and delete), set this to 0.
+// This switch is currently ignored for mingw / cygwin
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
+
+// In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
+// this causes problems (e.g. link errors), set this to 0. You may need to set
+// this to 0 if using templates (at least for VC++). This switch is currently
+// ignored for mingw / cygwin / CodeWarrior
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_DEBUG_NEW_ALWAYS 0
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 0, it is still experimental and API may change
+#define wxUSE_DEBUGREPORT 0
+
+// ----------------------------------------------------------------------------
+// Unicode support
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
+// defined as wchar_t, wxString will use Unicode internally. If you set this
+// to 1, you must use wxT() macro for all literal strings in the program.
+//
+// Unicode is currently only fully supported under Windows NT/2000/XP
+// (Windows 9x doesn't support it and the programs compiled in Unicode mode
+// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
+//
+// Default is 0
+//
+// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
+#ifndef wxUSE_UNICODE
+ #define wxUSE_UNICODE 0
+#endif
+
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
+// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
+// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
+// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
+// that you will have to modify the makefiles to include unicows.lib import
+// library as the first library (see installation instructions in install.txt
+// to learn how to do it when building the library or samples).
+//
+// If your compiler doesn't have unicows.lib, you can get a version of it at
+// http://libunicows.sourceforge.net
+//
+// Default is 0
+//
+// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
+#define wxUSE_UNICODE_MSLU 0
+
+// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
+// compiling the program in Unicode mode. More precisely, it will be possible
+// to construct wxString from a wide (Unicode) string and convert any wxString
+// to Unicode.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_WCHAR_T 1
+
+// ----------------------------------------------------------------------------
+// global features
+// ----------------------------------------------------------------------------
+
+// Compile library in exception-safe mode? If set to 1, the library will try to
+// behave correctly in presence of exceptions (even though it still will not
+// use the exceptions itself) and notify the user code about any unhandled
+// exceptions. If set to 0, propagation of the exceptions through the library
+// code will lead to undefined behaviour -- but the code itself will be
+// slightly smaller and faster.
+//
+// Note that like wxUSE_THREADS this option is automatically set to 0 if
+// wxNO_EXCEPTIONS is defined.
+//
+// Default is 1
+//
+// Recommended setting: depends on whether you intend to use C++ exceptions
+// in your own code (1 if you do, 0 if you don't)
+#define wxUSE_EXCEPTIONS 1
+
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0 (this is still work in progress...)
+#define wxUSE_EXTENDED_RTTI 0
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
+// Support for message/error logging. This includes wxLogXXX() functions and
+// wxLog and derived classes. Don't set this to 0 unless you really know what
+// you are doing.
+//
+// Default is 1
+//
+// Recommended setting: 1 (always)
+#define wxUSE_LOG 1
+
+// Recommended setting: 1
+#define wxUSE_LOGWINDOW 1
+
+// Recommended setting: 1
+#define wxUSE_LOGGUI 1
+
+// Recommended setting: 1
+#define wxUSE_LOG_DIALOG 1
+
+// Support for command line parsing using wxCmdLineParser class.
+//
+// Default is 1
+//
+// Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
+#define wxUSE_CMDLINE_PARSER 1
+
+// Support for multithreaded applications: if 1, compile in thread classes
+// (thread.h) and make the library a bit more thread safe. Although thread
+// support is quite stable by now, you may still consider recompiling the
+// library without it if you have no use for it - this will result in a
+// somewhat smaller and faster operation.
+//
+// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
+// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
+// build/msw/config.* file this value will have no effect.
+//
+// Default is 1
+//
+// Recommended setting: 0 unless you do plan to develop MT applications
+#define wxUSE_THREADS 1
+
+// If enabled (1), compiles wxWidgets streams classes
+#define wxUSE_STREAMS 1
+
+// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
+#define wxUSE_STD_IOSTREAM 0
projects / wxWidgets.git / blobdiff