+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% Name: ftp.tex
+%% Purpose: wxFTP documentation
+%% Author: Guilhem Lavaux, Vadim Zeitlin
+%% Modified by:
+%% Created: ~1997
+%% RCS-ID: $Id$
+%% Copyright: (c) wxWidgets team
+%% License: wxWindows license
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
\section{\class{wxFTP}}\label{wxftp}
+wxFTP can be used to establish a connection to an FTP server and perform all the
+usual operations. Please consult the RFC 959 for more details about the FTP
+protocol.
+
+To use a commands which doesn't involve file transfer (i.e. directory oriented
+commands) you just need to call a corresponding member function or use the
+generic \helpref{SendCommand}{wxftpsendcommand} method. However to actually
+transfer files you just get or give a stream to or from this class and the
+actual data are read or written using the usual stream methods.
+
+Example of using wxFTP for file downloading:
+
+\begin{verbatim}
+ wxFTP ftp;
+
+ // if you don't use these lines anonymous login will be used
+ ftp.SetUser("user");
+ ftp.SetPassword("password");
+
+ if ( !ftp.Connect("ftp.wxwindows.org") )
+ {
+ wxLogError("Couldn't connect");
+ return;
+ }
+
+ ftp.ChDir("/pub");
+ wxInputStream *in = ftp.GetInputStream("wxWidgets-4.2.0.tar.gz");
+ if ( !in )
+ {
+ wxLogError("Coudln't get file");
+ }
+ else
+ {
+ size_t size = in->GetSize();
+ char *data = new char[size];
+ if ( !in->Read(data, size) )
+ {
+ wxLogError("Read error");
+ }
+ else
+ {
+ // file data is in the buffer
+ ...
+ }
+
+ delete [] data;
+ delete in;
+ }
+\end{verbatim}
+
+To upload a file you would do (assuming the connection to the server was opened
+successfully):
+
+\begin{verbatim}
+ wxOutputStream *out = ftp.GetOutputStream("filename");
+ if ( out )
+ {
+ out->Write(...); // your data
+ delete out;
+ }
+\end{verbatim}
+
+\wxheading{Constants}
+
+wxFTP defines constants corresponding to the two supported transfer modes:
+
+\begin{verbatim}
+enum TransferMode
+{
+ ASCII,
+ BINARY
+};
+\end{verbatim}
+
\wxheading{Derived from}
\helpref{wxProtocol}{wxprotocol}
\latexignore{\rtfignore{\wxheading{Members}}}
-\membersection{wxFTP::SendCommand}
-\func{bool}{SendCommand}{\param{const wxString\&}{ command}, \param{char }{ret}}
+\membersection{wxFTP::wxFTP}\label{wxftpctor}
+
+\func{}{wxFTP}{\void}
+
+Default constructor.
+
+
+\membersection{wxFTP::\destruct{wxFTP}}\label{wxftpdtor}
+
+\func{}{\destruct{wxFTP}}{\void}
+
+Destructor will close the connection if connected.
+
+
+\membersection{wxFTP::Abort}\label{wxftpabort}
+
+\func{bool}{Abort}{\void}
+
+Aborts the download currently in process, returns {\tt true} if ok, {\tt false}
+if an error occured.
+
+
+\membersection{wxFTP::CheckCommand}\label{wxftpcheckcommand}
+
+\func{bool}{CheckCommand}{\param{const wxString\&}{ command}, \param{char }{ret}}
Send the specified {\it command} to the FTP server. {\it ret} specifies
the expected result.
\wxheading{Return value}
-TRUE if the command has been sent successfully, else FALSE.
+true if the command has been sent successfully, else false.
-% ----------------------------------------------------------------------------
-\membersection{wxFTP::GetLastResult}
+\membersection{wxFTP::SendCommand}\label{wxftpsendcommand}
+
+\func{char}{SendCommand}{\param{const wxString\&}{ command}}
+
+Send the specified {\it command} to the FTP server and return the first
+character of the return code.
+
+
+\membersection{wxFTP::GetLastResult}\label{wxftpgetlastresult}
\func{const wxString\&}{GetLastResult}{\void}
-Returns the last command result.
+Returns the last command result, i.e. the full server reply for the last
+command.
% ----------------------------------------------------------------------------
-\membersection{wxFTP::ChDir}
+
+\membersection{wxFTP::ChDir}\label{wxftpchdir}
\func{bool}{ChDir}{\param{const wxString\&}{ dir}}
Change the current FTP working directory.
-Returns TRUE if successful.
+Returns true if successful.
+
-\membersection{wxFTP::MkDir}
+\membersection{wxFTP::MkDir}\label{wxftpmkdir}
\func{bool}{MkDir}{\param{const wxString\&}{ dir}}
Create the specified directory in the current FTP working directory.
-Returns TRUE if successful.
+Returns true if successful.
-\membersection{wxFTP::RmDir}
+
+\membersection{wxFTP::RmDir}\label{wxftprmdir}
\func{bool}{RmDir}{\param{const wxString\&}{ dir}}
Remove the specified directory from the current FTP working directory.
-Returns TRUE if successful.
+Returns true if successful.
+
-\membersection{wxFTP::Pwd}
+\membersection{wxFTP::Pwd}\label{wxftppwd}
\func{wxString}{Pwd}{\void}
% ----------------------------------------------------------------------------
-\membersection{wxFTP::Rename}
+
+\membersection{wxFTP::Rename}\label{wxftprename}
\func{bool}{Rename}{\param{const wxString\&}{ src}, \param{const wxString\&}{ dst}}
-Rename the specified {\it src} element to {\it dst}. Returns TRUE if successful.
+Rename the specified {\it src} element to {\it dst}. Returns true if successful.
% ----------------------------------------------------------------------------
-\membersection{wxFTP::RmFile}
+
+\membersection{wxFTP::RmFile}\label{wxftprmfile}
\func{bool}{RmFile}{\param{const wxString\&}{ path}}
-Delete the file specified by {\it path}. Returns TRUE if successful.
+Delete the file specified by {\it path}. Returns true if successful.
% ----------------------------------------------------------------------------
-\membersection{wxFTP::SetUser}
+
+\membersection{wxFTP::SetAscii}\label{wxftpsetascii}
+
+\func{bool}{SetAscii}{\void}
+
+Sets the transfer mode to ASCII. It will be used for the next transfer.
+
+
+\membersection{wxFTP::SetBinary}\label{wxftpsetbinary}
+
+\func{bool}{SetBinary}{\void}
+
+Sets the transfer mode to binary (IMAGE). It will be used for the next transfer.
+
+
+\membersection{wxFTP::SetPassive}\label{wxftpsetpassive}
+
+\func{void}{SetPassive}{\param{bool }{pasv}}
+
+If \arg{pasv} is \true, passive connection to the FTP server is used. This is
+the default as it works with practically all firewalls. If the server doesn't
+support passive move, you may call this function with \false argument to use
+active connection.
+
+
+\membersection{wxFTP::SetTransferMode}\label{wxftpsettransfermode}
+
+\func{bool}{SetTransferMode}{\param{TransferMode }{mode}}
+
+Sets the transfer mode to the specified one. It will be used for the next
+transfer.
+
+If this function is never called, binary transfer mode is used by default.
+
+% ----------------------------------------------------------------------------
+
+
+\membersection{wxFTP::SetUser}\label{wxftpsetuser}
\func{void}{SetUser}{\param{const wxString\&}{ user}}
For example, you can use: "ftp://a\_user:a\_password@a.host:service/a\_directory/a\_file"
to specify a user and a password.
-\membersection{wxFTP::SetPassword}
+
+\membersection{wxFTP::SetPassword}\label{wxftpsetpassword}
\func{void}{SetPassword}{\param{const wxString\&}{ passwd}}
to specify a user and a password.
% ----------------------------------------------------------------------------
-\membersection{wxFTP::GetList}
-\func{wxList *}{GetList}{\param{const wxString\&}{ wildcard}}
+
+\membersection{wxFTP::FileExists}\label{wxftpfileexists}
+
+\func{bool}{FileExists}{\param{const wxString\&}{ filename}}
+
+Returns {\tt true} if the given remote file exists, {\tt false} otherwise.
+
+
+\membersection{wxFTP::GetFileSize}\label{wxftpgetfilesize}
+
+\func{int}{GetFileSize}{\param{const wxString\&}{ filename}}
+
+Returns the file size in bytes or $-1$ if the file doesn't exist or the size
+couldn't be determined. Notice that this size can be approximative size only
+and shouldn't be used for allocating the buffer in which the remote file is
+copied, for example.
+
+
+\membersection{wxFTP::GetDirList}\label{wxftpgetdirlist}
+
+\func{bool}{GetDirList}{\param{wxArrayString\& }{files}, \param{const wxString\&}{ wildcard = ""}}
The GetList function is quite low-level. It returns the list of the files in
the current directory. The list can be filtered using the {\it wildcard} string.
-If {\it wildcard} is a NULL string, it will return all files in directory.
+If {\it wildcard} is empty (default), it will return all files in directory.
The form of the list can change from one peer system to another. For example,
for a UNIX peer system, it will look like this:
1 file(s) 520 196 bytes
\end{verbatim}
-The list is a string list and one node corresponds to a line sent by the peer.
+Return value: true if the file list was successfully retrieved, false
+otherwise.
+
+\wxheading{See also}
+
+\helpref{GetFilesList}{wxftpgetfileslist}
+
+
+\membersection{wxFTP::GetFilesList}\label{wxftpgetfileslist}
+
+\func{bool}{GetFilesList}{\param{wxArrayString\& }{files}, \param{const wxString\&}{ wildcard = ""}}
+
+This function returns the computer-parsable list of the files in the current
+directory (optionally only of the files matching the {\it wildcard}, all files
+by default). This list always has the same format and contains one full
+(including the directory path) file name per line.
+
+Return value: true if the file list was successfully retrieved, false
+otherwise.
% ----------------------------------------------------------------------------
-\membersection{wxFTP::GetOutputStream}
+
+\membersection{wxFTP::GetOutputStream}\label{wxftpgetoutputstream}
\func{wxOutputStream *}{GetOutputStream}{\param{const wxString\&}{ file}}
% ----------------------------------------------------------------------------
-\membersection{wxFTP::GetInputStream}\label{wxftpgetinput}
+
+\membersection{wxFTP::GetInputStream}\label{wxftpgetinputstream}
\func{wxInputStream *}{GetInputStream}{\param{const wxString\&}{ path}}
\wxheading{Return value}
-Returns NULL if an error occured (it could be a network failure or the fact
+Returns NULL if an error occurred (it could be a network failure or the fact
that the file doesn't exist).
Returns the initialized stream. You will have to delete it yourself when you
ftp.ChDir("a_directory");
in_stream = ftp.GetInputStream("a_file_to_get");
- data = new char[in_stream->StreamSize()];
+ data = new char[in_stream->GetSize()];
- in_stream->Read(data, in_stream->StreamSize());
+ in_stream->Read(data, in_stream->GetSize());
if (in_stream->LastError() != wxStream_NOERROR) {
// Do something.
}
projects / wxWidgets.git / blobdiff