/////////////////////////////////////////////////////////////////////////////
// Name: setup.h
// Purpose: Configuration for the library
-// Author: AUTHOR
-// Modified by:
+// Author: Stefan Csomor
+// Modified by: Stefan Csomor
// Created: ??/??/98
// RCS-ID: $Id$
// Copyright: (c) AUTHOR
#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_
-// ----------------------------------------------------------------------------
-// global settings
-// ----------------------------------------------------------------------------
-
-// define this to 0 when building wxBase library
-#define wxUSE_GUI 1
+/*
+ * General features
+ *
+ */
-// ----------------------------------------------------------------------------
-// compatibility settings
-// ----------------------------------------------------------------------------
-
-// This setting determines the compatibility with 1.68 API:
-// Level 0: no backward compatibility, all new features
-// Level 1: some extra methods are defined for compatibility.
-//
-// Default is 0.
-//
-// Recommended setting: 0 (in fact the compatibility code is now very minimal
-// so there is little advantage to setting it to 1.
-#define WXWIN_COMPATIBILITY 0
-
+#define wxUSE_GEOMETRY 1
#define WORDS_BIGENDIAN 1
-// ----------------------------------------------------------------------------
-// non GUI features selection
-// ----------------------------------------------------------------------------
-
-// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
-// integer which is implemented in terms of native 64 bit integers if any or
-// uses emulation otherwise.
-//
-// This class is required by wxDateTime and so you should enable it if you want
-// to use wxDateTime. For most modern platforms, it will use the native 64 bit
-// integers in which case (almost) all of its functions are inline and it
-// almost does not take any space, so there should be no reason to switch it
-// off.
-//
-// Recommended setting: 1
-#define wxUSE_LONGLONG 1
-
-
-// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
-// allow to manipulate dates, times and time intervals. wxDateTime replaces the
-// old wxTime and wxDate classes which are still provided for backwards
-// compatibility (and implemented in terms of wxDateTime).
-//
-// Note that this class is relatively new and is still officially in alpha
-// stage because some features are not yet (fully) implemented. It is already
-// quite useful though and should only be disabled if you are aiming at
-// absolutely minimal version of the library.
-//
-// Requires: wxUSE_LONGLONG
-//
-// Recommended setting: 1
-#define wxUSE_TIMEDATE 1
-
-// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
-// which allow the application to store its settings in the persistent
-// storage. Setting this to 1 will also enable on-demand creation of the
-// global config object in wxApp.
-//
-// See also wxUSE_CONFIG_NATIVE below.
-//
-// Recommended setting: 1
#define wxUSE_CONFIG 1
+ // Use wxConfig, with CreateConfig in wxApp
-// ----------------------------------------------------------------------------
-// Optional controls
-// ----------------------------------------------------------------------------
-
-// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
-// classes at all. Otherwise, use the native toolbar class unless
-// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
-// supports some features which might not be supported by the native wxToolBar
-// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
-//
-// Default is 1 for all settings.
-//
-// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
-// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
-#define wxUSE_TOOLBAR 1
-#define wxUSE_TOOLBAR_NATIVE 1
-#define wxUSE_TOOLBAR_SIMPLE 0
-
-// wxNotebook is a control with several "tabs" located on one of its sides. It
-// may be used ot logically organise the data presented to the user instead of
-// putting everything in one huge dialog. It replaces wxTabControl and related
-// classes of wxWin 1.6x.
-//
-// Default is 1.
-//
-// Recommended setting: 1
-#define wxUSE_NOTEBOOK 1
-
-
-// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
-// 1 and not compiled into the library otherwise.
-//
-// Default is 1 for everything.
-//
-// Recommended setting: 1 (library might fail to compile for some combinations
-// of disabled controls)
-#define wxUSE_COMBOBOX 1
-#define wxUSE_CHOICE 1
-#define wxUSE_RADIOBTN 1
-#define wxUSE_RADIOBOX 1
-#define wxUSE_SCROLLBAR 1
-#define wxUSE_CHECKBOX 1
-#define wxUSE_LISTBOX 1
-#define wxUSE_SPINBTN 1
-#define wxUSE_SPINCTRL 1
-#define wxUSE_STATLINE 1
-#define wxUSE_CHECKLISTBOX 1
-#define wxUSE_CHOICE 1
-#define wxUSE_CARET 1
-#define wxUSE_SLIDER 1
-
-// ----------------------------------------------------------------------------
-// Postscript support settings
-// ----------------------------------------------------------------------------
-
-
+#define WXWIN_COMPATIBILITY 0
+ // Compatibility with 1.66 API.
+ // Level 0: no backward compatibility, all new features
+ // Level 1: wxDC, OnSize (etc.) compatibility, but
+ // some new features such as event tables
#define wxUSE_POSTSCRIPT 0
// 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 0
// 0 for no Metafile and metafile device context
#define wxUSE_IPC 0
// 0 for no interprocess comms
-#define wxUSE_HELP 0
+#define wxUSE_HELP 1
// 0 for no help facility
#define wxUSE_RESOURCES 1
// 0 for no wxGetResource/wxWriteResource
// 0 for no drag and drop
#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
// Define 1 to use toolbar classes
#define wxUSE_BUTTONBAR 1
// Define 1 to use buttonbar classes (enhanced toolbar
// wxObject::delete *IF* __WXDEBUG__ is also defined.
// WARNING: this code may not work with all architectures, especially
// if alignment is an issue.
+#ifndef __MWERKS__
+#define wxUSE_DEBUG_CONTEXT 0
+#else
#define wxUSE_DEBUG_CONTEXT 1
+#endif
// If 1, enables wxDebugContext, for
// writing error messages to file, etc.
// If __WXDEBUG__ is not defined, will still use
// Set this to 0 if your compiler can't cope
// with omission of prototype parameters.
-#define wxUSE_ODBC 1
- // Define 1 to use ODBC classes
-
+#define wxUSE_ODBC 1
+ // Define 1 to use ODBC classes
-#define wxODBC_FWD_ONLY_CURSORS 1
- // For backward compatibility reasons, this parameter now only
- // controls the default scrolling method used by cursors. This
- // default behavior can be overriden by setting the second param
- // of wxDB::GetDbConnection() to indicate whether the connection
- // (and any wxTable()s that use the connection) should support
- // forward only scrolling of cursors, or both forward and backward
- // Support for backward scrolling cursors is dependent on the
- // data source as well as the ODBC driver being used.
-#define wxODBC_BACKWARD_COMPATABILITY 0
- // Default is 0. Set to 1 to use the deprecated classes, enum
- // types, function, member variables. With a setting of 1, full
- // backward compatability with the 2.0.x release is possible.
- // It is STRONGLY recommended that this be set to 0, as
- // future development will be done only on the non-deprecated
- // functions/classes/member variables/etc.
+#define wxODBC_FWD_ONLY_CURSORS 1
+ // Some databases/ODBC drivers only allow forward scrolling cursors.
+ // Unless you specifically want to use backward scrolling
+ // cursors, and you know that all of the databases/ODBC drivers
+ // that you will use these odbc classes with allow backward
+ // scrolling cursors, this setting should remain set to 1
+ // for maximum database/driver compatibilty
#define wxUSE_STREAMS 1
// If enabled (1), compiles wxWindows streams classes
+#ifndef __MWERKS__
+#define wxUSE_STD_IOSTREAM 0
+#else
#define wxUSE_STD_IOSTREAM 1
// Use standard C++ streams if 1. If 0, use wxWin
// streams implementation.
+#endif
#define wxUSE_WXCONFIG 1
// if enabled, compiles built-in OS independent wxConfig
// class and it's file (any platform) and registry (Win)
// based implementations
-#define wxUSE_THREADS 0
+#define wxUSE_THREADS 1
// support for multithreaded applications: if
// 1, compile in thread classes (thread.h)
// and make the library thread safe
// Use zlib for compression in streams and PNG code
#define wxUSE_LIBPNG 1
// Use PNG bitmap code
-#define wxUSE_LIBJPEG 0
+#define wxUSE_LIBJPEG 1
// Use JPEG bitmap code
+#define wxUSE_LIBTIFF 1
+ // Use TIFF bitmap code
+#define wxUSE_GIF 1
+ // Use GIF bitmap code
+
#define wxUSE_SERIAL 0
// Use serialization (requires utils/serialize)
#define wxUSE_DYNLIB_CLASS 0
#define wxUSE_TOOLTIPS 1
// Define to use wxToolTip class and
// wxWindow::SetToolTip() method
-#define wxUSE_SOCKETS 0 // 0
+#define wxUSE_SOCKETS 1 // 0
// Set to 1 to use socket classes
#define wxUSE_HTML 1 // 0
// Set to 1 to use wxHTML sub-library
+#define wxUSE_FILESYSTEM 1
+
#define wxUSE_FS_ZIP 1 // 0
#define wxUSE_FS_INET 1 // 0 // Set to 1 to enable virtual file systems
// use wxTextFile class: requires wxFile, required by wxConfig
#define wxUSE_TEXTFILE 1
-// i18n support: _() macro, wxLocale class. Requires wxFile
+// i18n support: _() macro, wxLocale class. Requires wxTextFile.
#define wxUSE_INTL 1
// wxLogXXX functions - highly recommended
// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1
-// wxToolBar class
-#define wxUSE_TOOLBAR 1
-
// wxStatusBar class
#define wxUSE_STATUSBAR 1
projects / wxWidgets.git / blobdiff