+ *out = L'\0';
+ }
+
+ written++;
+ }
+
+ return written;
+ }
+
+ if ( out && !dstLen-- )
+ break;
+
+ wxUint32 code;
+ unsigned char c = *p;
+
+ if ( c < 0x80 )
+ {
+ if ( srcLen == 0 ) // the test works for wxNO_LEN too
+ break;
+
+ if ( srcLen != wxNO_LEN )
+ srcLen--;
+
+ code = c;
+ }
+ else
+ {
+ unsigned len = tableUtf8Lengths[c];
+ if ( !len )
+ break;
+
+ if ( srcLen < len ) // the test works for wxNO_LEN too
+ break;
+
+ if ( srcLen != wxNO_LEN )
+ srcLen -= len;
+
+ // Char. number range | UTF-8 octet sequence
+ // (hexadecimal) | (binary)
+ // ----------------------+----------------------------------------
+ // 0000 0000 - 0000 007F | 0xxxxxxx
+ // 0000 0080 - 0000 07FF | 110xxxxx 10xxxxxx
+ // 0000 0800 - 0000 FFFF | 1110xxxx 10xxxxxx 10xxxxxx
+ // 0001 0000 - 0010 FFFF | 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
+ //
+ // Code point value is stored in bits marked with 'x',
+ // lowest-order bit of the value on the right side in the diagram
+ // above. (from RFC 3629)
+
+ // mask to extract lead byte's value ('x' bits above), by sequence
+ // length:
+ static const unsigned char leadValueMask[] = { 0x7F, 0x1F, 0x0F, 0x07 };
+
+ // mask and value of lead byte's most significant bits, by length:
+ static const unsigned char leadMarkerMask[] = { 0x80, 0xE0, 0xF0, 0xF8 };
+ static const unsigned char leadMarkerVal[] = { 0x00, 0xC0, 0xE0, 0xF0 };
+
+ len--; // it's more convenient to work with 0-based length here
+
+ // extract the lead byte's value bits:
+ if ( (c & leadMarkerMask[len]) != leadMarkerVal[len] )
+ break;
+
+ code = c & leadValueMask[len];
+
+ // all remaining bytes, if any, are handled in the same way
+ // regardless of sequence's length:
+ for ( ; len; --len )
+ {
+ c = *++p;
+ if ( (c & 0xC0) != 0x80 )
+ return wxCONV_FAILED;
+
+ code <<= 6;
+ code |= c & 0x3F;
+ }
+ }
+
+#ifdef WC_UTF16
+ // cast is ok because wchar_t == wxUint16 if WC_UTF16
+ if ( encode_utf16(code, (wxUint16 *)out) == 2 )
+ {
+ if ( out )
+ out++;
+ written++;
+ }
+#else // !WC_UTF16
+ if ( out )
+ *out = code;
+#endif // WC_UTF16/!WC_UTF16
+
+ if ( out )
+ out++;
+
+ written++;
+ }
+
+ return wxCONV_FAILED;
+}
+
+size_t
+wxMBConvStrictUTF8::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ char *out = dstLen ? dst : NULL;
+ size_t written = 0;
+
+ for ( const wchar_t *wp = src; ; wp++ )
+ {
+ if ( (srcLen == wxNO_LEN ? !*wp : !srcLen) )
+ {
+ // all done successfully, just add the trailing NULL if we are not
+ // using explicit length
+ if ( srcLen == wxNO_LEN )
+ {
+ if ( out )
+ {
+ if ( !dstLen )
+ break;
+
+ *out = '\0';
+ }
+
+ written++;
+ }
+
+ return written;
+ }
+
+ if ( srcLen != wxNO_LEN )
+ srcLen--;
+
+ wxUint32 code;
+#ifdef WC_UTF16
+ // cast is ok for WC_UTF16
+ if ( decode_utf16((const wxUint16 *)wp, code) == 2 )
+ {
+ // skip the next char too as we decoded a surrogate
+ wp++;
+ }
+#else // wchar_t is UTF-32
+ code = *wp & 0x7fffffff;
+#endif
+
+ unsigned len;
+ if ( code <= 0x7F )
+ {
+ len = 1;
+ if ( out )
+ {
+ if ( dstLen < len )
+ break;
+
+ out[0] = (char)code;
+ }
+ }
+ else if ( code <= 0x07FF )
+ {
+ len = 2;
+ if ( out )
+ {
+ if ( dstLen < len )
+ break;
+
+ // NB: this line takes 6 least significant bits, encodes them as
+ // 10xxxxxx and discards them so that the next byte can be encoded:
+ out[1] = 0x80 | (code & 0x3F); code >>= 6;
+ out[0] = 0xC0 | code;
+ }
+ }
+ else if ( code < 0xFFFF )
+ {
+ len = 3;
+ if ( out )
+ {
+ if ( dstLen < len )
+ break;
+
+ out[2] = 0x80 | (code & 0x3F); code >>= 6;
+ out[1] = 0x80 | (code & 0x3F); code >>= 6;
+ out[0] = 0xE0 | code;
+ }
+ }
+ else if ( code <= 0x10FFFF )
+ {
+ len = 4;
+ if ( out )
+ {
+ if ( dstLen < len )
+ break;
+
+ out[3] = 0x80 | (code & 0x3F); code >>= 6;
+ out[2] = 0x80 | (code & 0x3F); code >>= 6;
+ out[1] = 0x80 | (code & 0x3F); code >>= 6;
+ out[0] = 0xF0 | code;
+ }
+ }
+ else
+ {
+ wxFAIL_MSG( wxT("trying to encode undefined Unicode character") );
+ break;
+ }
+
+ if ( out )
+ {
+ out += len;
+ dstLen -= len;
+ }
+
+ written += len;
+ }
+
+ // we only get here if an error occurs during decoding
+ return wxCONV_FAILED;
+}
+
+size_t wxMBConvUTF8::ToWChar(wchar_t *buf, size_t n,
+ const char *psz, size_t srcLen) const
+{
+ if ( m_options == MAP_INVALID_UTF8_NOT )
+ return wxMBConvStrictUTF8::ToWChar(buf, n, psz, srcLen);
+
+ size_t len = 0;
+
+ while ((srcLen == wxNO_LEN ? *psz : srcLen--) && ((!buf) || (len < n)))
+ {
+ const char *opsz = psz;
+ bool invalid = false;
+ unsigned char cc = *psz++, fc = cc;
+ unsigned cnt;
+ for (cnt = 0; fc & 0x80; cnt++)
+ fc <<= 1;
+
+ if (!cnt)
+ {
+ // plain ASCII char
+ if (buf)
+ *buf++ = cc;
+ len++;
+
+ // escape the escape character for octal escapes
+ if ((m_options & MAP_INVALID_UTF8_TO_OCTAL)
+ && cc == '\\' && (!buf || len < n))
+ {
+ if (buf)
+ *buf++ = cc;
+ len++;
+ }
+ }
+ else
+ {
+ cnt--;
+ if (!cnt)
+ {
+ // invalid UTF-8 sequence
+ invalid = true;
+ }
+ else
+ {
+ unsigned ocnt = cnt - 1;
+ wxUint32 res = cc & (0x3f >> cnt);
+ while (cnt--)
+ {
+ cc = *psz;
+ if ((cc & 0xC0) != 0x80)
+ {
+ // invalid UTF-8 sequence
+ invalid = true;
+ break;
+ }
+
+ psz++;
+ res = (res << 6) | (cc & 0x3f);
+ }
+
+ if (invalid || res <= utf8_max[ocnt])
+ {
+ // illegal UTF-8 encoding
+ invalid = true;
+ }
+ else if ((m_options & MAP_INVALID_UTF8_TO_PUA) &&
+ res >= wxUnicodePUA && res < wxUnicodePUAEnd)
+ {
+ // if one of our PUA characters turns up externally
+ // it must also be treated as an illegal sequence
+ // (a bit like you have to escape an escape character)
+ invalid = true;
+ }
+ else
+ {
+#ifdef WC_UTF16
+ // cast is ok because wchar_t == wxUint16 if WC_UTF16
+ size_t pa = encode_utf16(res, (wxUint16 *)buf);
+ if (pa == wxCONV_FAILED)
+ {
+ invalid = true;
+ }
+ else
+ {
+ if (buf)
+ buf += pa;
+ len += pa;
+ }
+#else // !WC_UTF16
+ if (buf)
+ *buf++ = (wchar_t)res;
+ len++;
+#endif // WC_UTF16/!WC_UTF16
+ }
+ }
+
+ if (invalid)
+ {
+ if (m_options & MAP_INVALID_UTF8_TO_PUA)
+ {
+ while (opsz < psz && (!buf || len < n))
+ {
+#ifdef WC_UTF16
+ // cast is ok because wchar_t == wxUuint16 if WC_UTF16
+ size_t pa = encode_utf16((unsigned char)*opsz + wxUnicodePUA, (wxUint16 *)buf);
+ wxASSERT(pa != wxCONV_FAILED);
+ if (buf)
+ buf += pa;
+ opsz++;
+ len += pa;
+#else
+ if (buf)
+ *buf++ = (wchar_t)(wxUnicodePUA + (unsigned char)*opsz);
+ opsz++;
+ len++;
+#endif
+ }
+ }
+ else if (m_options & MAP_INVALID_UTF8_TO_OCTAL)
+ {
+ while (opsz < psz && (!buf || len < n))
+ {
+ if ( buf && len + 3 < n )
+ {
+ unsigned char on = *opsz;
+ *buf++ = L'\\';
+ *buf++ = (wchar_t)( L'0' + on / 0100 );
+ *buf++ = (wchar_t)( L'0' + (on % 0100) / 010 );
+ *buf++ = (wchar_t)( L'0' + on % 010 );
+ }
+
+ opsz++;
+ len += 4;
+ }
+ }
+ else // MAP_INVALID_UTF8_NOT
+ {
+ return wxCONV_FAILED;
+ }
+ }
+ }
+ }
+
+ if (srcLen == wxNO_LEN && buf && (len < n))
+ *buf = 0;
+
+ return len + 1;
+}
+
+static inline bool isoctal(wchar_t wch)
+{
+ return L'0' <= wch && wch <= L'7';
+}
+
+size_t wxMBConvUTF8::FromWChar(char *buf, size_t n,
+ const wchar_t *psz, size_t srcLen) const
+{
+ if ( m_options == MAP_INVALID_UTF8_NOT )
+ return wxMBConvStrictUTF8::FromWChar(buf, n, psz, srcLen);
+
+ size_t len = 0;
+
+ while ((srcLen == wxNO_LEN ? *psz : srcLen--) && ((!buf) || (len < n)))
+ {
+ wxUint32 cc;
+
+#ifdef WC_UTF16
+ // cast is ok for WC_UTF16
+ size_t pa = decode_utf16((const wxUint16 *)psz, cc);
+ psz += (pa == wxCONV_FAILED) ? 1 : pa;
+#else
+ cc = (*psz++) & 0x7fffffff;
+#endif
+
+ if ( (m_options & MAP_INVALID_UTF8_TO_PUA)
+ && cc >= wxUnicodePUA && cc < wxUnicodePUAEnd )
+ {
+ if (buf)
+ *buf++ = (char)(cc - wxUnicodePUA);
+ len++;
+ }
+ else if ( (m_options & MAP_INVALID_UTF8_TO_OCTAL)
+ && cc == L'\\' && psz[0] == L'\\' )
+ {
+ if (buf)
+ *buf++ = (char)cc;
+ psz++;
+ len++;
+ }
+ else if ( (m_options & MAP_INVALID_UTF8_TO_OCTAL) &&
+ cc == L'\\' &&
+ isoctal(psz[0]) && isoctal(psz[1]) && isoctal(psz[2]) )
+ {
+ if (buf)
+ {
+ *buf++ = (char) ((psz[0] - L'0') * 0100 +
+ (psz[1] - L'0') * 010 +
+ (psz[2] - L'0'));
+ }
+
+ psz += 3;
+ len++;
+ }
+ else
+ {
+ unsigned cnt;
+ for (cnt = 0; cc > utf8_max[cnt]; cnt++)
+ {
+ }
+
+ if (!cnt)
+ {
+ // plain ASCII char
+ if (buf)
+ *buf++ = (char) cc;
+ len++;
+ }
+ else
+ {
+ len += cnt + 1;
+ if (buf)
+ {
+ *buf++ = (char) ((-128 >> cnt) | ((cc >> (cnt * 6)) & (0x3f >> cnt)));
+ while (cnt--)
+ *buf++ = (char) (0x80 | ((cc >> (cnt * 6)) & 0x3f));
+ }
+ }
+ }
+ }
+
+ if (srcLen == wxNO_LEN && buf && (len < n))
+ *buf = 0;
+
+ return len + 1;
+}
+
+// ============================================================================
+// UTF-16
+// ============================================================================
+
+#ifdef WORDS_BIGENDIAN
+ #define wxMBConvUTF16straight wxMBConvUTF16BE
+ #define wxMBConvUTF16swap wxMBConvUTF16LE
+#else
+ #define wxMBConvUTF16swap wxMBConvUTF16BE
+ #define wxMBConvUTF16straight wxMBConvUTF16LE
+#endif
+
+/* static */
+size_t wxMBConvUTF16Base::GetLength(const char *src, size_t srcLen)
+{
+ if ( srcLen == wxNO_LEN )
+ {
+ // count the number of bytes in input, including the trailing NULs
+ const wxUint16 *inBuff = reinterpret_cast<const wxUint16 *>(src);
+ for ( srcLen = 1; *inBuff++; srcLen++ )
+ ;
+
+ srcLen *= BYTES_PER_CHAR;
+ }
+ else // we already have the length
+ {
+ // we can only convert an entire number of UTF-16 characters
+ if ( srcLen % BYTES_PER_CHAR )
+ return wxCONV_FAILED;
+ }
+
+ return srcLen;
+}
+
+// case when in-memory representation is UTF-16 too
+#ifdef WC_UTF16
+
+// ----------------------------------------------------------------------------
+// conversions without endianness change
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF16straight::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ // set up the scene for using memcpy() (which is presumably more efficient
+ // than copying the bytes one by one)
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const size_t inLen = srcLen / BYTES_PER_CHAR;
+ if ( dst )
+ {
+ if ( dstLen < inLen )
+ return wxCONV_FAILED;
+
+ memcpy(dst, src, srcLen);
+ }
+
+ return inLen;
+}
+
+size_t
+wxMBConvUTF16straight::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ srcLen *= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ memcpy(dst, src, srcLen);
+ }
+
+ return srcLen;
+}
+
+// ----------------------------------------------------------------------------
+// endian-reversing conversions
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF16swap::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ srcLen /= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ const wxUint16 *inBuff = reinterpret_cast<const wxUint16 *>(src);
+ for ( size_t n = 0; n < srcLen; n++, inBuff++ )
+ {
+ *dst++ = wxUINT16_SWAP_ALWAYS(*inBuff);
+ }
+ }
+
+ return srcLen;
+}
+
+size_t
+wxMBConvUTF16swap::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ srcLen *= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ wxUint16 *outBuff = reinterpret_cast<wxUint16 *>(dst);
+ for ( size_t n = 0; n < srcLen; n += BYTES_PER_CHAR, src++ )
+ {
+ *outBuff++ = wxUINT16_SWAP_ALWAYS(*src);
+ }
+ }
+
+ return srcLen;
+}
+
+#else // !WC_UTF16: wchar_t is UTF-32
+
+// ----------------------------------------------------------------------------
+// conversions without endianness change
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF16straight::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const size_t inLen = srcLen / BYTES_PER_CHAR;
+ if ( !dst )
+ {
+ // optimization: return maximal space which could be needed for this
+ // string even if the real size could be smaller if the buffer contains
+ // any surrogates
+ return inLen;
+ }
+
+ size_t outLen = 0;
+ const wxUint16 *inBuff = reinterpret_cast<const wxUint16 *>(src);
+ for ( const wxUint16 * const inEnd = inBuff + inLen; inBuff < inEnd; )
+ {
+ const wxUint32 ch = wxDecodeSurrogate(&inBuff);
+ if ( !inBuff )
+ return wxCONV_FAILED;
+
+ if ( ++outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *dst++ = ch;
+ }
+
+
+ return outLen;
+}
+
+size_t
+wxMBConvUTF16straight::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ size_t outLen = 0;
+ wxUint16 *outBuff = reinterpret_cast<wxUint16 *>(dst);
+ for ( size_t n = 0; n < srcLen; n++ )
+ {
+ wxUint16 cc[2] = { 0 };
+ const size_t numChars = encode_utf16(*src++, cc);
+ if ( numChars == wxCONV_FAILED )
+ return wxCONV_FAILED;
+
+ outLen += numChars * BYTES_PER_CHAR;
+ if ( outBuff )
+ {
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *outBuff++ = cc[0];
+ if ( numChars == 2 )
+ {
+ // second character of a surrogate
+ *outBuff++ = cc[1];
+ }
+ }
+ }
+
+ return outLen;
+}
+
+// ----------------------------------------------------------------------------
+// endian-reversing conversions
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF16swap::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const size_t inLen = srcLen / BYTES_PER_CHAR;
+ if ( !dst )
+ {
+ // optimization: return maximal space which could be needed for this
+ // string even if the real size could be smaller if the buffer contains
+ // any surrogates
+ return inLen;
+ }
+
+ size_t outLen = 0;
+ const wxUint16 *inBuff = reinterpret_cast<const wxUint16 *>(src);
+ for ( const wxUint16 * const inEnd = inBuff + inLen; inBuff < inEnd; )
+ {
+ wxUint32 ch;
+ wxUint16 tmp[2];
+
+ tmp[0] = wxUINT16_SWAP_ALWAYS(*inBuff);
+ inBuff++;
+ tmp[1] = wxUINT16_SWAP_ALWAYS(*inBuff);
+
+ const size_t numChars = decode_utf16(tmp, ch);
+ if ( numChars == wxCONV_FAILED )
+ return wxCONV_FAILED;
+
+ if ( numChars == 2 )
+ inBuff++;
+
+ if ( ++outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *dst++ = ch;
+ }
+
+
+ return outLen;
+}
+
+size_t
+wxMBConvUTF16swap::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ size_t outLen = 0;
+ wxUint16 *outBuff = reinterpret_cast<wxUint16 *>(dst);
+ for ( const wchar_t *srcEnd = src + srcLen; src < srcEnd; src++ )
+ {
+ wxUint16 cc[2] = { 0 };
+ const size_t numChars = encode_utf16(*src, cc);
+ if ( numChars == wxCONV_FAILED )
+ return wxCONV_FAILED;
+
+ outLen += numChars * BYTES_PER_CHAR;
+ if ( outBuff )
+ {
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *outBuff++ = wxUINT16_SWAP_ALWAYS(cc[0]);
+ if ( numChars == 2 )
+ {
+ // second character of a surrogate
+ *outBuff++ = wxUINT16_SWAP_ALWAYS(cc[1]);
+ }
+ }
+ }
+
+ return outLen;
+}
+
+#endif // WC_UTF16/!WC_UTF16
+
+
+// ============================================================================
+// UTF-32
+// ============================================================================
+
+#ifdef WORDS_BIGENDIAN
+ #define wxMBConvUTF32straight wxMBConvUTF32BE
+ #define wxMBConvUTF32swap wxMBConvUTF32LE
+#else
+ #define wxMBConvUTF32swap wxMBConvUTF32BE
+ #define wxMBConvUTF32straight wxMBConvUTF32LE
+#endif
+
+
+WXDLLIMPEXP_DATA_BASE(wxMBConvUTF32LE) wxConvUTF32LE;
+WXDLLIMPEXP_DATA_BASE(wxMBConvUTF32BE) wxConvUTF32BE;
+
+/* static */
+size_t wxMBConvUTF32Base::GetLength(const char *src, size_t srcLen)
+{
+ if ( srcLen == wxNO_LEN )
+ {
+ // count the number of bytes in input, including the trailing NULs
+ const wxUint32 *inBuff = reinterpret_cast<const wxUint32 *>(src);
+ for ( srcLen = 1; *inBuff++; srcLen++ )
+ ;
+
+ srcLen *= BYTES_PER_CHAR;
+ }
+ else // we already have the length
+ {
+ // we can only convert an entire number of UTF-32 characters
+ if ( srcLen % BYTES_PER_CHAR )
+ return wxCONV_FAILED;
+ }
+
+ return srcLen;
+}
+
+// case when in-memory representation is UTF-16
+#ifdef WC_UTF16
+
+// ----------------------------------------------------------------------------
+// conversions without endianness change
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF32straight::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const wxUint32 *inBuff = reinterpret_cast<const wxUint32 *>(src);
+ const size_t inLen = srcLen / BYTES_PER_CHAR;
+ size_t outLen = 0;
+ for ( size_t n = 0; n < inLen; n++ )
+ {
+ wxUint16 cc[2] = { 0 };
+ const size_t numChars = encode_utf16(*inBuff++, cc);
+ if ( numChars == wxCONV_FAILED )
+ return wxCONV_FAILED;
+
+ outLen += numChars;
+ if ( dst )
+ {
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *dst++ = cc[0];
+ if ( numChars == 2 )
+ {
+ // second character of a surrogate
+ *dst++ = cc[1];
+ }
+ }
+ }
+
+ return outLen;
+}
+
+size_t
+wxMBConvUTF32straight::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ if ( !dst )
+ {
+ // optimization: return maximal space which could be needed for this
+ // string instead of the exact amount which could be less if there are
+ // any surrogates in the input
+ //
+ // we consider that surrogates are rare enough to make it worthwhile to
+ // avoid running the loop below at the cost of slightly extra memory
+ // consumption
+ return srcLen * BYTES_PER_CHAR;
+ }
+
+ wxUint32 *outBuff = reinterpret_cast<wxUint32 *>(dst);
+ size_t outLen = 0;
+ for ( const wchar_t * const srcEnd = src + srcLen; src < srcEnd; )
+ {
+ const wxUint32 ch = wxDecodeSurrogate(&src);
+ if ( !src )
+ return wxCONV_FAILED;
+
+ outLen += BYTES_PER_CHAR;
+
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *outBuff++ = ch;
+ }
+
+ return outLen;
+}
+
+// ----------------------------------------------------------------------------
+// endian-reversing conversions
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF32swap::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const wxUint32 *inBuff = reinterpret_cast<const wxUint32 *>(src);
+ const size_t inLen = srcLen / BYTES_PER_CHAR;
+ size_t outLen = 0;
+ for ( size_t n = 0; n < inLen; n++, inBuff++ )
+ {
+ wxUint16 cc[2] = { 0 };
+ const size_t numChars = encode_utf16(wxUINT32_SWAP_ALWAYS(*inBuff), cc);
+ if ( numChars == wxCONV_FAILED )
+ return wxCONV_FAILED;
+
+ outLen += numChars;
+ if ( dst )
+ {
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *dst++ = cc[0];
+ if ( numChars == 2 )
+ {
+ // second character of a surrogate
+ *dst++ = cc[1];
+ }
+ }
+ }
+
+ return outLen;
+}
+
+size_t
+wxMBConvUTF32swap::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ if ( !dst )
+ {
+ // optimization: return maximal space which could be needed for this
+ // string instead of the exact amount which could be less if there are
+ // any surrogates in the input
+ //
+ // we consider that surrogates are rare enough to make it worthwhile to
+ // avoid running the loop below at the cost of slightly extra memory
+ // consumption
+ return srcLen*BYTES_PER_CHAR;
+ }
+
+ wxUint32 *outBuff = reinterpret_cast<wxUint32 *>(dst);
+ size_t outLen = 0;
+ for ( const wchar_t * const srcEnd = src + srcLen; src < srcEnd; )
+ {
+ const wxUint32 ch = wxDecodeSurrogate(&src);
+ if ( !src )
+ return wxCONV_FAILED;
+
+ outLen += BYTES_PER_CHAR;
+
+ if ( outLen > dstLen )
+ return wxCONV_FAILED;
+
+ *outBuff++ = wxUINT32_SWAP_ALWAYS(ch);
+ }
+
+ return outLen;
+}
+
+#else // !WC_UTF16: wchar_t is UTF-32
+
+// ----------------------------------------------------------------------------
+// conversions without endianness change
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF32straight::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ // use memcpy() as it should be much faster than hand-written loop
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ const size_t inLen = srcLen/BYTES_PER_CHAR;
+ if ( dst )
+ {
+ if ( dstLen < inLen )
+ return wxCONV_FAILED;
+
+ memcpy(dst, src, srcLen);
+ }
+
+ return inLen;
+}
+
+size_t
+wxMBConvUTF32straight::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ srcLen *= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ memcpy(dst, src, srcLen);
+ }
+
+ return srcLen;
+}
+
+// ----------------------------------------------------------------------------
+// endian-reversing conversions
+// ----------------------------------------------------------------------------
+
+size_t
+wxMBConvUTF32swap::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ srcLen = GetLength(src, srcLen);
+ if ( srcLen == wxNO_LEN )
+ return wxCONV_FAILED;
+
+ srcLen /= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ const wxUint32 *inBuff = reinterpret_cast<const wxUint32 *>(src);
+ for ( size_t n = 0; n < srcLen; n++, inBuff++ )
+ {
+ *dst++ = wxUINT32_SWAP_ALWAYS(*inBuff);
+ }
+ }
+
+ return srcLen;
+}
+
+size_t
+wxMBConvUTF32swap::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ srcLen *= BYTES_PER_CHAR;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ wxUint32 *outBuff = reinterpret_cast<wxUint32 *>(dst);
+ for ( size_t n = 0; n < srcLen; n += BYTES_PER_CHAR, src++ )
+ {
+ *outBuff++ = wxUINT32_SWAP_ALWAYS(*src);
+ }
+ }
+
+ return srcLen;
+}
+
+#endif // WC_UTF16/!WC_UTF16
+
+
+// ============================================================================
+// The classes doing conversion using the iconv_xxx() functions
+// ============================================================================
+
+#ifdef HAVE_ICONV
+
+// VS: glibc 2.1.3 is broken in that iconv() conversion to/from UCS4 fails with
+// E2BIG if output buffer is _exactly_ as big as needed. Such case is
+// (unless there's yet another bug in glibc) the only case when iconv()
+// returns with (size_t)-1 (which means error) and says there are 0 bytes
+// left in the input buffer -- when _real_ error occurs,
+// bytes-left-in-input buffer is non-zero. Hence, this alternative test for
+// iconv() failure.
+// [This bug does not appear in glibc 2.2.]
+#if defined(__GLIBC__) && __GLIBC__ == 2 && __GLIBC_MINOR__ <= 1
+#define ICONV_FAILED(cres, bufLeft) ((cres == (size_t)-1) && \
+ (errno != E2BIG || bufLeft != 0))
+#else
+#define ICONV_FAILED(cres, bufLeft) (cres == (size_t)-1)
+#endif
+
+#define ICONV_CHAR_CAST(x) ((ICONV_CONST char **)(x))
+
+#define ICONV_T_INVALID ((iconv_t)-1)
+
+#if SIZEOF_WCHAR_T == 4
+ #define WC_BSWAP wxUINT32_SWAP_ALWAYS
+ #define WC_ENC wxFONTENCODING_UTF32
+#elif SIZEOF_WCHAR_T == 2
+ #define WC_BSWAP wxUINT16_SWAP_ALWAYS
+ #define WC_ENC wxFONTENCODING_UTF16
+#else // sizeof(wchar_t) != 2 nor 4
+ // does this ever happen?
+ #error "Unknown sizeof(wchar_t): please report this to wx-dev@lists.wxwindows.org"
+#endif
+
+// ----------------------------------------------------------------------------
+// wxMBConv_iconv: encapsulates an iconv character set
+// ----------------------------------------------------------------------------
+
+class wxMBConv_iconv : public wxMBConv
+{
+public:
+ wxMBConv_iconv(const char *name);
+ virtual ~wxMBConv_iconv();
+
+ // implement base class virtual methods
+ virtual size_t ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen = wxNO_LEN) const;
+ virtual size_t FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen = wxNO_LEN) const;
+ virtual size_t GetMBNulLen() const;
+
+#if wxUSE_UNICODE_UTF8
+ virtual bool IsUTF8() const;
+#endif
+
+ virtual wxMBConv *Clone() const
+ {
+ wxMBConv_iconv *p = new wxMBConv_iconv(m_name);
+ p->m_minMBCharWidth = m_minMBCharWidth;
+ return p;
+ }
+
+ bool IsOk() const
+ { return (m2w != ICONV_T_INVALID) && (w2m != ICONV_T_INVALID); }
+
+protected:
+ // the iconv handlers used to translate from multibyte
+ // to wide char and in the other direction
+ iconv_t m2w,
+ w2m;
+
+#if wxUSE_THREADS
+ // guards access to m2w and w2m objects
+ wxMutex m_iconvMutex;
+#endif
+
+private:
+ // the name (for iconv_open()) of a wide char charset -- if none is
+ // available on this machine, it will remain NULL
+ static wxString ms_wcCharsetName;
+
+ // true if the wide char encoding we use (i.e. ms_wcCharsetName) has
+ // different endian-ness than the native one
+ static bool ms_wcNeedsSwap;
+
+
+ // name of the encoding handled by this conversion
+ const char *m_name;
+
+ // cached result of GetMBNulLen(); set to 0 meaning "unknown"
+ // initially
+ size_t m_minMBCharWidth;
+};
+
+// make the constructor available for unit testing
+WXDLLIMPEXP_BASE wxMBConv* new_wxMBConv_iconv( const char* name )
+{
+ wxMBConv_iconv* result = new wxMBConv_iconv( name );
+ if ( !result->IsOk() )
+ {
+ delete result;
+ return 0;
+ }
+
+ return result;
+}
+
+wxString wxMBConv_iconv::ms_wcCharsetName;
+bool wxMBConv_iconv::ms_wcNeedsSwap = false;
+
+wxMBConv_iconv::wxMBConv_iconv(const char *name)
+ : m_name(wxStrdup(name))
+{
+ m_minMBCharWidth = 0;
+
+ // check for charset that represents wchar_t:
+ if ( ms_wcCharsetName.empty() )
+ {
+ wxLogTrace(TRACE_STRCONV, wxT("Looking for wide char codeset:"));
+
+#if wxUSE_FONTMAP
+ const wxChar *const *names = wxFontMapperBase::GetAllEncodingNames(WC_ENC);
+#else // !wxUSE_FONTMAP
+ static const wxChar *const names_static[] =
+ {
+#if SIZEOF_WCHAR_T == 4
+ wxT("UCS-4"),
+#elif SIZEOF_WCHAR_T == 2
+ wxT("UCS-2"),
+#endif
+ NULL
+ };
+ const wxChar *const *names = names_static;
+#endif // wxUSE_FONTMAP/!wxUSE_FONTMAP
+
+ for ( ; *names && ms_wcCharsetName.empty(); ++names )
+ {
+ const wxString nameCS(*names);
+
+ // first try charset with explicit bytesex info (e.g. "UCS-4LE"):
+ wxString nameXE(nameCS);
+
+#ifdef WORDS_BIGENDIAN
+ nameXE += wxT("BE");
+#else // little endian
+ nameXE += wxT("LE");
+#endif
+
+ wxLogTrace(TRACE_STRCONV, wxT(" trying charset \"%s\""),
+ nameXE.c_str());
+
+ m2w = iconv_open(nameXE.ToAscii(), name);
+ if ( m2w == ICONV_T_INVALID )
+ {
+ // try charset w/o bytesex info (e.g. "UCS4")
+ wxLogTrace(TRACE_STRCONV, wxT(" trying charset \"%s\""),
+ nameCS.c_str());
+ m2w = iconv_open(nameCS.ToAscii(), name);
+
+ // and check for bytesex ourselves:
+ if ( m2w != ICONV_T_INVALID )
+ {
+ char buf[2], *bufPtr;
+ wchar_t wbuf[2];
+ size_t insz, outsz;
+ size_t res;
+
+ buf[0] = 'A';
+ buf[1] = 0;
+ wbuf[0] = 0;
+ insz = 2;
+ outsz = SIZEOF_WCHAR_T * 2;
+ char* wbufPtr = (char*)wbuf;
+ bufPtr = buf;
+
+ res = iconv(
+ m2w, ICONV_CHAR_CAST(&bufPtr), &insz,
+ &wbufPtr, &outsz);
+
+ if (ICONV_FAILED(res, insz))
+ {
+ wxLogLastError(wxT("iconv"));
+ wxLogError(_("Conversion to charset '%s' doesn't work."),
+ nameCS.c_str());
+ }
+ else // ok, can convert to this encoding, remember it
+ {
+ ms_wcCharsetName = nameCS;
+ ms_wcNeedsSwap = wbuf[0] != (wchar_t)buf[0];
+ }
+ }
+ }
+ else // use charset not requiring byte swapping
+ {
+ ms_wcCharsetName = nameXE;
+ }
+ }
+
+ wxLogTrace(TRACE_STRCONV,
+ wxT("iconv wchar_t charset is \"%s\"%s"),
+ ms_wcCharsetName.empty() ? wxString("<none>")
+ : ms_wcCharsetName,
+ ms_wcNeedsSwap ? wxT(" (needs swap)")
+ : wxT(""));
+ }
+ else // we already have ms_wcCharsetName
+ {
+ m2w = iconv_open(ms_wcCharsetName.ToAscii(), name);
+ }
+
+ if ( ms_wcCharsetName.empty() )
+ {
+ w2m = ICONV_T_INVALID;
+ }
+ else
+ {
+ w2m = iconv_open(name, ms_wcCharsetName.ToAscii());
+ if ( w2m == ICONV_T_INVALID )
+ {
+ wxLogTrace(TRACE_STRCONV,
+ wxT("\"%s\" -> \"%s\" works but not the converse!?"),
+ ms_wcCharsetName.c_str(), name);
+ }
+ }
+}
+
+wxMBConv_iconv::~wxMBConv_iconv()
+{
+ free(const_cast<char *>(m_name));
+
+ if ( m2w != ICONV_T_INVALID )
+ iconv_close(m2w);
+ if ( w2m != ICONV_T_INVALID )
+ iconv_close(w2m);
+}
+
+size_t
+wxMBConv_iconv::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ if ( srcLen == wxNO_LEN )
+ {
+ // find the string length: notice that must be done differently for
+ // NUL-terminated strings and UTF-16/32 which are terminated with 2/4
+ // consecutive NULs
+ const size_t nulLen = GetMBNulLen();
+ switch ( nulLen )
+ {
+ default:
+ return wxCONV_FAILED;
+
+ case 1:
+ srcLen = strlen(src); // arguably more optimized than our version
+ break;
+
+ case 2:
+ case 4:
+ // for UTF-16/32 not only we need to have 2/4 consecutive NULs
+ // but they also have to start at character boundary and not
+ // span two adjacent characters
+ const char *p;
+ for ( p = src; NotAllNULs(p, nulLen); p += nulLen )
+ ;
+ srcLen = p - src;
+ break;
+ }
+
+ // when we're determining the length of the string ourselves we count
+ // the terminating NUL(s) as part of it and always NUL-terminate the
+ // output
+ srcLen += nulLen;
+ }
+
+ // we express length in the number of (wide) characters but iconv always
+ // counts buffer sizes it in bytes
+ dstLen *= SIZEOF_WCHAR_T;
+
+#if wxUSE_THREADS
+ // NB: iconv() is MT-safe, but each thread must use its own iconv_t handle.
+ // Unfortunately there are a couple of global wxCSConv objects such as
+ // wxConvLocal that are used all over wx code, so we have to make sure
+ // the handle is used by at most one thread at the time. Otherwise
+ // only a few wx classes would be safe to use from non-main threads
+ // as MB<->WC conversion would fail "randomly".
+ wxMutexLocker lock(wxConstCast(this, wxMBConv_iconv)->m_iconvMutex);
+#endif // wxUSE_THREADS
+
+ size_t res, cres;
+ const char *pszPtr = src;
+
+ if ( dst )
+ {
+ char* bufPtr = (char*)dst;
+
+ // have destination buffer, convert there
+ size_t dstLenOrig = dstLen;
+ cres = iconv(m2w,
+ ICONV_CHAR_CAST(&pszPtr), &srcLen,
+ &bufPtr, &dstLen);
+
+ // convert the number of bytes converted as returned by iconv to the
+ // number of (wide) characters converted that we need
+ res = (dstLenOrig - dstLen) / SIZEOF_WCHAR_T;
+
+ if (ms_wcNeedsSwap)
+ {
+ // convert to native endianness
+ for ( unsigned i = 0; i < res; i++ )
+ dst[i] = WC_BSWAP(dst[i]);
+ }
+ }
+ else // no destination buffer
+ {
+ // convert using temp buffer to calculate the size of the buffer needed
+ wchar_t tbuf[256];
+ res = 0;
+
+ do
+ {
+ char* bufPtr = (char*)tbuf;
+ dstLen = 8 * SIZEOF_WCHAR_T;
+
+ cres = iconv(m2w,
+ ICONV_CHAR_CAST(&pszPtr), &srcLen,
+ &bufPtr, &dstLen );
+
+ res += 8 - (dstLen / SIZEOF_WCHAR_T);
+ }
+ while ((cres == (size_t)-1) && (errno == E2BIG));
+ }
+
+ if (ICONV_FAILED(cres, srcLen))
+ {
+ //VS: it is ok if iconv fails, hence trace only
+ wxLogTrace(TRACE_STRCONV, wxT("iconv failed: %s"), wxSysErrorMsg(wxSysErrorCode()));
+ return wxCONV_FAILED;
+ }
+
+ return res;
+}
+
+size_t wxMBConv_iconv::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+#if wxUSE_THREADS
+ // NB: explained in MB2WC
+ wxMutexLocker lock(wxConstCast(this, wxMBConv_iconv)->m_iconvMutex);
+#endif
+
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ size_t inbuflen = srcLen * SIZEOF_WCHAR_T;
+ size_t outbuflen = dstLen;
+ size_t res, cres;
+
+ wchar_t *tmpbuf = 0;
+
+ if (ms_wcNeedsSwap)
+ {
+ // need to copy to temp buffer to switch endianness
+ // (doing WC_BSWAP twice on the original buffer won't work, as it
+ // could be in read-only memory, or be accessed in some other thread)
+ tmpbuf = (wchar_t *)malloc(inbuflen);
+ for ( size_t i = 0; i < srcLen; i++ )
+ tmpbuf[i] = WC_BSWAP(src[i]);
+
+ src = tmpbuf;
+ }
+
+ char* inbuf = (char*)src;
+ if ( dst )
+ {
+ // have destination buffer, convert there
+ cres = iconv(w2m, ICONV_CHAR_CAST(&inbuf), &inbuflen, &dst, &outbuflen);
+
+ res = dstLen - outbuflen;
+ }
+ else // no destination buffer
+ {
+ // convert using temp buffer to calculate the size of the buffer needed
+ char tbuf[256];
+ res = 0;
+ do
+ {
+ dst = tbuf;
+ outbuflen = WXSIZEOF(tbuf);
+
+ cres = iconv(w2m, ICONV_CHAR_CAST(&inbuf), &inbuflen, &dst, &outbuflen);
+
+ res += WXSIZEOF(tbuf) - outbuflen;
+ }
+ while ((cres == (size_t)-1) && (errno == E2BIG));
+ }
+
+ if (ms_wcNeedsSwap)
+ {
+ free(tmpbuf);
+ }
+
+ if (ICONV_FAILED(cres, inbuflen))
+ {
+ wxLogTrace(TRACE_STRCONV, wxT("iconv failed: %s"), wxSysErrorMsg(wxSysErrorCode()));
+ return wxCONV_FAILED;
+ }
+
+ return res;
+}
+
+size_t wxMBConv_iconv::GetMBNulLen() const
+{
+ if ( m_minMBCharWidth == 0 )
+ {
+ wxMBConv_iconv * const self = wxConstCast(this, wxMBConv_iconv);
+
+#if wxUSE_THREADS
+ // NB: explained in MB2WC
+ wxMutexLocker lock(self->m_iconvMutex);
+#endif
+
+ const wchar_t *wnul = L"";
+ char buf[8]; // should be enough for NUL in any encoding
+ size_t inLen = sizeof(wchar_t),
+ outLen = WXSIZEOF(buf);
+ char *inBuff = (char *)wnul;
+ char *outBuff = buf;
+ if ( iconv(w2m, ICONV_CHAR_CAST(&inBuff), &inLen, &outBuff, &outLen) == (size_t)-1 )
+ {
+ self->m_minMBCharWidth = (size_t)-1;
+ }
+ else // ok
+ {
+ self->m_minMBCharWidth = outBuff - buf;
+ }
+ }
+
+ return m_minMBCharWidth;
+}
+
+#if wxUSE_UNICODE_UTF8
+bool wxMBConv_iconv::IsUTF8() const
+{
+ return wxStricmp(m_name, "UTF-8") == 0 ||
+ wxStricmp(m_name, "UTF8") == 0;
+}
+#endif
+
+#endif // HAVE_ICONV
+
+
+// ============================================================================
+// Win32 conversion classes
+// ============================================================================
+
+#ifdef wxHAVE_WIN32_MB2WC
+
+// from utils.cpp
+#if wxUSE_FONTMAP
+extern WXDLLIMPEXP_BASE long wxCharsetToCodepage(const char *charset);
+extern WXDLLIMPEXP_BASE long wxEncodingToCodepage(wxFontEncoding encoding);
+#endif
+
+class wxMBConv_win32 : public wxMBConv
+{
+public:
+ wxMBConv_win32()
+ {
+ m_CodePage = CP_ACP;
+ m_minMBCharWidth = 0;
+ }
+
+ wxMBConv_win32(const wxMBConv_win32& conv)
+ : wxMBConv()
+ {
+ m_CodePage = conv.m_CodePage;
+ m_minMBCharWidth = conv.m_minMBCharWidth;
+ }
+
+#if wxUSE_FONTMAP
+ wxMBConv_win32(const char* name)
+ {
+ m_CodePage = wxCharsetToCodepage(name);
+ m_minMBCharWidth = 0;
+ }
+
+ wxMBConv_win32(wxFontEncoding encoding)
+ {
+ m_CodePage = wxEncodingToCodepage(encoding);
+ m_minMBCharWidth = 0;
+ }
+#endif // wxUSE_FONTMAP
+
+ virtual size_t MB2WC(wchar_t *buf, const char *psz, size_t n) const
+ {
+ // note that we have to use MB_ERR_INVALID_CHARS flag as it without it
+ // the behaviour is not compatible with the Unix version (using iconv)
+ // and break the library itself, e.g. wxTextInputStream::NextChar()
+ // wouldn't work if reading an incomplete MB char didn't result in an
+ // error
+ //
+ // Moreover, MB_ERR_INVALID_CHARS is only supported on Win 2K SP4 or
+ // Win XP or newer and it is not supported for UTF-[78] so we always
+ // use our own conversions in this case. See
+ // http://blogs.msdn.com/michkap/archive/2005/04/19/409566.aspx
+ // http://msdn.microsoft.com/library/en-us/intl/unicode_17si.asp
+ if ( m_CodePage == CP_UTF8 )
+ {
+ return wxMBConvUTF8().MB2WC(buf, psz, n);
+ }
+
+ if ( m_CodePage == CP_UTF7 )
+ {
+ return wxMBConvUTF7().MB2WC(buf, psz, n);
+ }
+
+ int flags = 0;
+ if ( (m_CodePage < 50000 && m_CodePage != CP_SYMBOL) &&
+ IsAtLeastWin2kSP4() )
+ {
+ flags = MB_ERR_INVALID_CHARS;
+ }
+
+ const size_t len = ::MultiByteToWideChar
+ (
+ m_CodePage, // code page
+ flags, // flags: fall on error
+ psz, // input string
+ -1, // its length (NUL-terminated)
+ buf, // output string
+ buf ? n : 0 // size of output buffer
+ );
+ if ( !len )
+ {
+ // function totally failed
+ return wxCONV_FAILED;
+ }
+
+ // if we were really converting and didn't use MB_ERR_INVALID_CHARS,
+ // check if we succeeded, by doing a double trip:
+ if ( !flags && buf )
+ {
+ const size_t mbLen = strlen(psz);
+ wxCharBuffer mbBuf(mbLen);
+ if ( ::WideCharToMultiByte
+ (
+ m_CodePage,
+ 0,
+ buf,
+ -1,
+ mbBuf.data(),
+ mbLen + 1, // size in bytes, not length
+ NULL,
+ NULL
+ ) == 0 ||
+ strcmp(mbBuf, psz) != 0 )
+ {
+ // we didn't obtain the same thing we started from, hence
+ // the conversion was lossy and we consider that it failed
+ return wxCONV_FAILED;
+ }
+ }
+
+ // note that it returns count of written chars for buf != NULL and size
+ // of the needed buffer for buf == NULL so in either case the length of
+ // the string (which never includes the terminating NUL) is one less
+ return len - 1;
+ }
+
+ virtual size_t WC2MB(char *buf, const wchar_t *pwz, size_t n) const
+ {
+ /*
+ we have a problem here: by default, WideCharToMultiByte() may
+ replace characters unrepresentable in the target code page with bad
+ quality approximations such as turning "1/2" symbol (U+00BD) into
+ "1" for the code pages which don't have it and we, obviously, want
+ to avoid this at any price
+
+ the trouble is that this function does it _silently_, i.e. it won't
+ even tell us whether it did or not... Win98/2000 and higher provide
+ WC_NO_BEST_FIT_CHARS but it doesn't work for the older systems and
+ we have to resort to a round trip, i.e. check that converting back
+ results in the same string -- this is, of course, expensive but
+ otherwise we simply can't be sure to not garble the data.
+ */
+
+ // determine if we can rely on WC_NO_BEST_FIT_CHARS: according to MSDN
+ // it doesn't work with CJK encodings (which we test for rather roughly
+ // here...) nor with UTF-7/8 nor, of course, with Windows versions not
+ // supporting it
+ BOOL usedDef wxDUMMY_INITIALIZE(false);
+ BOOL *pUsedDef;
+ int flags;
+ if ( CanUseNoBestFit() && m_CodePage < 50000 )
+ {
+ // it's our lucky day
+ flags = WC_NO_BEST_FIT_CHARS;
+ pUsedDef = &usedDef;
+ }
+ else // old system or unsupported encoding
+ {
+ flags = 0;
+ pUsedDef = NULL;
+ }
+
+ const size_t len = ::WideCharToMultiByte
+ (
+ m_CodePage, // code page
+ flags, // either none or no best fit
+ pwz, // input string
+ -1, // it is (wide) NUL-terminated
+ buf, // output buffer
+ buf ? n : 0, // and its size
+ NULL, // default "replacement" char
+ pUsedDef // [out] was it used?
+ );
+
+ if ( !len )
+ {
+ // function totally failed
+ return wxCONV_FAILED;
+ }
+
+ // we did something, check if we really succeeded
+ if ( flags )
+ {
+ // check if the conversion failed, i.e. if any replacements
+ // were done
+ if ( usedDef )
+ return wxCONV_FAILED;
+ }
+ else // we must resort to double tripping...
+ {
+ // first we need to ensure that we really have the MB data: this is
+ // not the case if we're called with NULL buffer, in which case we
+ // need to do the conversion yet again
+ wxCharBuffer bufDef;
+ if ( !buf )
+ {
+ bufDef = wxCharBuffer(len);
+ buf = bufDef.data();
+ if ( !::WideCharToMultiByte(m_CodePage, flags, pwz, -1,
+ buf, len, NULL, NULL) )
+ return wxCONV_FAILED;
+ }
+
+ if ( !n )
+ n = wcslen(pwz);
+ wxWCharBuffer wcBuf(n);
+ if ( MB2WC(wcBuf.data(), buf, n + 1) == wxCONV_FAILED ||
+ wcscmp(wcBuf, pwz) != 0 )
+ {
+ // we didn't obtain the same thing we started from, hence
+ // the conversion was lossy and we consider that it failed
+ return wxCONV_FAILED;
+ }
+ }
+
+ // see the comment above for the reason of "len - 1"
+ return len - 1;
+ }
+
+ virtual size_t GetMBNulLen() const
+ {
+ if ( m_minMBCharWidth == 0 )
+ {
+ int len = ::WideCharToMultiByte
+ (
+ m_CodePage, // code page
+ 0, // no flags
+ L"", // input string
+ 1, // translate just the NUL
+ NULL, // output buffer
+ 0, // and its size
+ NULL, // no replacement char
+ NULL // [out] don't care if it was used
+ );
+
+ wxMBConv_win32 * const self = wxConstCast(this, wxMBConv_win32);
+ switch ( len )
+ {
+ default:
+ wxLogDebug(wxT("Unexpected NUL length %d"), len);
+ self->m_minMBCharWidth = (size_t)-1;
+ break;
+
+ case 0:
+ self->m_minMBCharWidth = (size_t)-1;
+ break;
+
+ case 1:
+ case 2:
+ case 4:
+ self->m_minMBCharWidth = len;
+ break;
+ }
+ }
+
+ return m_minMBCharWidth;
+ }
+
+ virtual wxMBConv *Clone() const { return new wxMBConv_win32(*this); }
+
+ bool IsOk() const { return m_CodePage != -1; }
+
+private:
+ static bool CanUseNoBestFit()
+ {
+ static int s_isWin98Or2k = -1;
+
+ if ( s_isWin98Or2k == -1 )
+ {
+ int verMaj, verMin;
+ switch ( wxGetOsVersion(&verMaj, &verMin) )
+ {
+ case wxOS_WINDOWS_9X:
+ s_isWin98Or2k = verMaj >= 4 && verMin >= 10;
+ break;
+
+ case wxOS_WINDOWS_NT:
+ s_isWin98Or2k = verMaj >= 5;
+ break;
+
+ default:
+ // unknown: be conservative by default
+ s_isWin98Or2k = 0;
+ break;
+ }
+
+ wxASSERT_MSG( s_isWin98Or2k != -1, wxT("should be set above") );
+ }
+
+ return s_isWin98Or2k == 1;
+ }
+
+ static bool IsAtLeastWin2kSP4()
+ {
+#ifdef __WXWINCE__
+ return false;
+#else
+ static int s_isAtLeastWin2kSP4 = -1;
+
+ if ( s_isAtLeastWin2kSP4 == -1 )
+ {
+ OSVERSIONINFOEX ver;
+
+ memset(&ver, 0, sizeof(ver));
+ ver.dwOSVersionInfoSize = sizeof(ver);
+ GetVersionEx((OSVERSIONINFO*)&ver);
+
+ s_isAtLeastWin2kSP4 =
+ ((ver.dwMajorVersion > 5) || // Vista+
+ (ver.dwMajorVersion == 5 && ver.dwMinorVersion > 0) || // XP/2003
+ (ver.dwMajorVersion == 5 && ver.dwMinorVersion == 0 &&
+ ver.wServicePackMajor >= 4)) // 2000 SP4+
+ ? 1 : 0;
+ }
+
+ return s_isAtLeastWin2kSP4 == 1;
+#endif
+ }
+
+
+ // the code page we're working with
+ long m_CodePage;
+
+ // cached result of GetMBNulLen(), set to 0 initially meaning
+ // "unknown"
+ size_t m_minMBCharWidth;
+};
+
+#endif // wxHAVE_WIN32_MB2WC
+
+
+// ============================================================================
+// wxEncodingConverter based conversion classes
+// ============================================================================
+
+#if wxUSE_FONTMAP
+
+class wxMBConv_wxwin : public wxMBConv
+{
+private:
+ void Init()
+ {
+ // Refuse to use broken wxEncodingConverter code for Mac-specific encodings.
+ // The wxMBConv_cf class does a better job.
+ m_ok = (m_enc < wxFONTENCODING_MACMIN || m_enc > wxFONTENCODING_MACMAX) &&
+ m2w.Init(m_enc, wxFONTENCODING_UNICODE) &&
+ w2m.Init(wxFONTENCODING_UNICODE, m_enc);
+ }
+
+public:
+ // temporarily just use wxEncodingConverter stuff,
+ // so that it works while a better implementation is built
+ wxMBConv_wxwin(const char* name)
+ {
+ if (name)
+ m_enc = wxFontMapperBase::Get()->CharsetToEncoding(name, false);
+ else
+ m_enc = wxFONTENCODING_SYSTEM;
+
+ Init();
+ }
+
+ wxMBConv_wxwin(wxFontEncoding enc)
+ {
+ m_enc = enc;
+
+ Init();
+ }
+
+ size_t MB2WC(wchar_t *buf, const char *psz, size_t WXUNUSED(n)) const
+ {
+ size_t inbuf = strlen(psz);
+ if (buf)
+ {
+ if (!m2w.Convert(psz, buf))
+ return wxCONV_FAILED;
+ }
+ return inbuf;
+ }
+
+ size_t WC2MB(char *buf, const wchar_t *psz, size_t WXUNUSED(n)) const
+ {
+ const size_t inbuf = wxWcslen(psz);
+ if (buf)
+ {
+ if (!w2m.Convert(psz, buf))
+ return wxCONV_FAILED;
+ }
+
+ return inbuf;
+ }
+
+ virtual size_t GetMBNulLen() const
+ {
+ switch ( m_enc )
+ {
+ case wxFONTENCODING_UTF16BE:
+ case wxFONTENCODING_UTF16LE:
+ return 2;
+
+ case wxFONTENCODING_UTF32BE:
+ case wxFONTENCODING_UTF32LE:
+ return 4;
+
+ default:
+ return 1;
+ }
+ }
+
+ virtual wxMBConv *Clone() const { return new wxMBConv_wxwin(m_enc); }
+
+ bool IsOk() const { return m_ok; }
+
+public:
+ wxFontEncoding m_enc;
+ wxEncodingConverter m2w, w2m;
+
+private:
+ // were we initialized successfully?
+ bool m_ok;
+
+ wxDECLARE_NO_COPY_CLASS(wxMBConv_wxwin);
+};
+
+// make the constructors available for unit testing
+WXDLLIMPEXP_BASE wxMBConv* new_wxMBConv_wxwin( const char* name )
+{
+ wxMBConv_wxwin* result = new wxMBConv_wxwin( name );
+ if ( !result->IsOk() )
+ {
+ delete result;
+ return 0;
+ }
+
+ return result;
+}
+
+#endif // wxUSE_FONTMAP
+
+// ============================================================================
+// wxCSConv implementation
+// ============================================================================
+
+void wxCSConv::Init()
+{
+ m_name = NULL;
+ m_convReal = NULL;
+}
+
+void wxCSConv::SetEncoding(wxFontEncoding encoding)
+{
+ switch ( encoding )
+ {
+ case wxFONTENCODING_MAX:
+ case wxFONTENCODING_SYSTEM:
+ if ( m_name )
+ {
+ // It's ok to not have encoding value if we have a name for it.
+ m_encoding = wxFONTENCODING_SYSTEM;
+ }
+ else // No name neither.
+ {
+ // Fall back to the system default encoding in this case (not
+ // sure how much sense does this make but this is how the old
+ // code used to behave).
+#if wxUSE_INTL
+ m_encoding = wxLocale::GetSystemEncoding();
+ if ( m_encoding == wxFONTENCODING_SYSTEM )
+#endif // wxUSE_INTL
+ m_encoding = wxFONTENCODING_ISO8859_1;
+ }
+ break;
+
+ case wxFONTENCODING_DEFAULT:
+ // wxFONTENCODING_DEFAULT is same as US-ASCII in this context
+ m_encoding = wxFONTENCODING_ISO8859_1;
+ break;
+
+ default:
+ // Just use the provided encoding.
+ m_encoding = encoding;
+ }
+}
+
+wxCSConv::wxCSConv(const wxString& charset)
+{
+ Init();
+
+ if ( !charset.empty() )
+ {
+ SetName(charset.ToAscii());
+ }
+
+#if wxUSE_FONTMAP
+ SetEncoding(wxFontMapperBase::GetEncodingFromName(charset));
+#else
+ SetEncoding(wxFONTENCODING_SYSTEM);
+#endif
+
+ m_convReal = DoCreate();
+}
+
+wxCSConv::wxCSConv(wxFontEncoding encoding)
+{
+ if ( encoding == wxFONTENCODING_MAX || encoding == wxFONTENCODING_DEFAULT )
+ {
+ wxFAIL_MSG( wxT("invalid encoding value in wxCSConv ctor") );
+
+ encoding = wxFONTENCODING_SYSTEM;
+ }
+
+ Init();
+
+ SetEncoding(encoding);
+
+ m_convReal = DoCreate();
+}
+
+wxCSConv::~wxCSConv()
+{
+ Clear();
+}
+
+wxCSConv::wxCSConv(const wxCSConv& conv)
+ : wxMBConv()
+{
+ Init();
+
+ SetName(conv.m_name);
+ SetEncoding(conv.m_encoding);
+
+ m_convReal = DoCreate();
+}
+
+wxCSConv& wxCSConv::operator=(const wxCSConv& conv)
+{
+ Clear();
+
+ SetName(conv.m_name);
+ SetEncoding(conv.m_encoding);
+
+ m_convReal = DoCreate();
+
+ return *this;
+}
+
+void wxCSConv::Clear()
+{
+ free(m_name);
+ m_name = NULL;
+
+ wxDELETE(m_convReal);
+}
+
+void wxCSConv::SetName(const char *charset)
+{
+ if ( charset )
+ m_name = wxStrdup(charset);
+}
+
+#if wxUSE_FONTMAP
+
+WX_DECLARE_HASH_MAP( wxFontEncoding, wxString, wxIntegerHash, wxIntegerEqual,
+ wxEncodingNameCache );
+
+static wxEncodingNameCache gs_nameCache;
+#endif
+
+wxMBConv *wxCSConv::DoCreate() const
+{
+#if wxUSE_FONTMAP
+ wxLogTrace(TRACE_STRCONV,
+ wxT("creating conversion for %s"),
+ (m_name ? m_name
+ : (const char*)wxFontMapperBase::GetEncodingName(m_encoding).mb_str()));
+#endif // wxUSE_FONTMAP
+
+ // check for the special case of ASCII or ISO8859-1 charset: as we have
+ // special knowledge of it anyhow, we don't need to create a special
+ // conversion object
+ if ( m_encoding == wxFONTENCODING_ISO8859_1 )
+ {
+ // don't convert at all
+ return NULL;
+ }
+
+ // we trust OS to do conversion better than we can so try external
+ // conversion methods first
+ //
+ // the full order is:
+ // 1. OS conversion (iconv() under Unix or Win32 API)
+ // 2. hard coded conversions for UTF
+ // 3. wxEncodingConverter as fall back
+
+ // step (1)
+#ifdef HAVE_ICONV
+#if !wxUSE_FONTMAP
+ if ( m_name )
+#endif // !wxUSE_FONTMAP
+ {
+#if wxUSE_FONTMAP
+ wxFontEncoding encoding(m_encoding);
+#endif
+
+ if ( m_name )
+ {
+ wxMBConv_iconv *conv = new wxMBConv_iconv(m_name);
+ if ( conv->IsOk() )
+ return conv;
+
+ delete conv;
+
+#if wxUSE_FONTMAP
+ encoding =
+ wxFontMapperBase::Get()->CharsetToEncoding(m_name, false);
+#endif // wxUSE_FONTMAP
+ }
+#if wxUSE_FONTMAP
+ {
+ const wxEncodingNameCache::iterator it = gs_nameCache.find(encoding);
+ if ( it != gs_nameCache.end() )
+ {
+ if ( it->second.empty() )
+ return NULL;
+
+ wxMBConv_iconv *conv = new wxMBConv_iconv(it->second.ToAscii());
+ if ( conv->IsOk() )
+ return conv;
+
+ delete conv;
+ }
+
+ const wxChar* const* names = wxFontMapperBase::GetAllEncodingNames(encoding);
+ // CS : in case this does not return valid names (eg for MacRoman)
+ // encoding got a 'failure' entry in the cache all the same,
+ // although it just has to be created using a different method, so
+ // only store failed iconv creation attempts (or perhaps we
+ // shoulnd't do this at all ?)
+ if ( names[0] != NULL )
+ {
+ for ( ; *names; ++names )
+ {
+ // FIXME-UTF8: wxFontMapperBase::GetAllEncodingNames()
+ // will need changes that will obsolete this
+ wxString name(*names);
+ wxMBConv_iconv *conv = new wxMBConv_iconv(name.ToAscii());
+ if ( conv->IsOk() )
+ {
+ gs_nameCache[encoding] = *names;
+ return conv;
+ }
+
+ delete conv;
+ }
+
+ gs_nameCache[encoding] = wxT(""); // cache the failure
+ }
+ }
+#endif // wxUSE_FONTMAP
+ }
+#endif // HAVE_ICONV
+
+#ifdef wxHAVE_WIN32_MB2WC
+ {
+#if wxUSE_FONTMAP
+ wxMBConv_win32 *conv = m_name ? new wxMBConv_win32(m_name)
+ : new wxMBConv_win32(m_encoding);
+ if ( conv->IsOk() )
+ return conv;
+
+ delete conv;
+#else
+ return NULL;
+#endif
+ }
+#endif // wxHAVE_WIN32_MB2WC
+
+#ifdef __DARWIN__
+ {
+ // leave UTF16 and UTF32 to the built-ins of wx
+ if ( m_name || ( m_encoding < wxFONTENCODING_UTF16BE ||
+ ( m_encoding >= wxFONTENCODING_MACMIN && m_encoding <= wxFONTENCODING_MACMAX ) ) )
+ {
+#if wxUSE_FONTMAP
+ wxMBConv_cf *conv = m_name ? new wxMBConv_cf(m_name)
+ : new wxMBConv_cf(m_encoding);
+#else
+ wxMBConv_cf *conv = new wxMBConv_cf(m_encoding);
+#endif
+
+ if ( conv->IsOk() )
+ return conv;
+
+ delete conv;
+ }
+ }
+#endif // __DARWIN__
+
+ // step (2)
+ wxFontEncoding enc = m_encoding;
+#if wxUSE_FONTMAP
+ if ( enc == wxFONTENCODING_SYSTEM && m_name )
+ {
+ // use "false" to suppress interactive dialogs -- we can be called from
+ // anywhere and popping up a dialog from here is the last thing we want to
+ // do
+ enc = wxFontMapperBase::Get()->CharsetToEncoding(m_name, false);
+ }
+#endif // wxUSE_FONTMAP
+
+ switch ( enc )
+ {
+ case wxFONTENCODING_UTF7:
+ return new wxMBConvUTF7;
+
+ case wxFONTENCODING_UTF8:
+ return new wxMBConvUTF8;
+
+ case wxFONTENCODING_UTF16BE:
+ return new wxMBConvUTF16BE;
+
+ case wxFONTENCODING_UTF16LE:
+ return new wxMBConvUTF16LE;
+
+ case wxFONTENCODING_UTF32BE:
+ return new wxMBConvUTF32BE;
+
+ case wxFONTENCODING_UTF32LE:
+ return new wxMBConvUTF32LE;
+
+ default:
+ // nothing to do but put here to suppress gcc warnings
+ break;
+ }
+
+ // step (3)
+#if wxUSE_FONTMAP
+ {
+ wxMBConv_wxwin *conv = m_name ? new wxMBConv_wxwin(m_name)
+ : new wxMBConv_wxwin(m_encoding);
+ if ( conv->IsOk() )
+ return conv;
+
+ delete conv;
+ }
+
+ wxLogTrace(TRACE_STRCONV,
+ wxT("encoding \"%s\" is not supported by this system"),
+ (m_name ? wxString(m_name)
+ : wxFontMapperBase::GetEncodingName(m_encoding)));
+#endif // wxUSE_FONTMAP
+
+ return NULL;
+}
+
+bool wxCSConv::IsOk() const
+{
+ // special case: no convReal created for wxFONTENCODING_ISO8859_1
+ if ( m_encoding == wxFONTENCODING_ISO8859_1 )
+ return true; // always ok as we do it ourselves
+
+ // m_convReal->IsOk() is called at its own creation, so we know it must
+ // be ok if m_convReal is non-NULL
+ return m_convReal != NULL;
+}
+
+size_t wxCSConv::ToWChar(wchar_t *dst, size_t dstLen,
+ const char *src, size_t srcLen) const
+{
+ if (m_convReal)
+ return m_convReal->ToWChar(dst, dstLen, src, srcLen);
+
+ // latin-1 (direct)
+ if ( srcLen == wxNO_LEN )
+ srcLen = strlen(src) + 1; // take trailing NUL too
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ for ( size_t n = 0; n < srcLen; n++ )
+ dst[n] = (unsigned char)(src[n]);
+ }
+
+ return srcLen;
+}
+
+size_t wxCSConv::FromWChar(char *dst, size_t dstLen,
+ const wchar_t *src, size_t srcLen) const
+{
+ if (m_convReal)
+ return m_convReal->FromWChar(dst, dstLen, src, srcLen);
+
+ // latin-1 (direct)
+ if ( srcLen == wxNO_LEN )
+ srcLen = wxWcslen(src) + 1;
+
+ if ( dst )
+ {
+ if ( dstLen < srcLen )
+ return wxCONV_FAILED;
+
+ for ( size_t n = 0; n < srcLen; n++ )
+ {
+ if ( src[n] > 0xFF )
+ return wxCONV_FAILED;
+
+ dst[n] = (char)src[n];
+ }
+
+ }
+ else // still need to check the input validity
+ {
+ for ( size_t n = 0; n < srcLen; n++ )
+ {
+ if ( src[n] > 0xFF )
+ return wxCONV_FAILED;
+ }
+ }
+
+ return srcLen;
+}
+
+size_t wxCSConv::GetMBNulLen() const
+{
+ if ( m_convReal )
+ return m_convReal->GetMBNulLen();
+
+ // otherwise, we are ISO-8859-1
+ return 1;
+}
+
+#if wxUSE_UNICODE_UTF8
+bool wxCSConv::IsUTF8() const
+{
+ if ( m_convReal )
+ return m_convReal->IsUTF8();
+
+ // otherwise, we are ISO-8859-1
+ return false;
+}
+#endif
+
+
+#if wxUSE_UNICODE
+
+wxWCharBuffer wxSafeConvertMB2WX(const char *s)
+{
+ if ( !s )
+ return wxWCharBuffer();
+
+ wxWCharBuffer wbuf(wxConvLibc.cMB2WX(s));
+ if ( !wbuf )
+ wbuf = wxMBConvUTF8().cMB2WX(s);
+ if ( !wbuf )
+ wbuf = wxConvISO8859_1.cMB2WX(s);
+
+ return wbuf;
+}
+
+wxCharBuffer wxSafeConvertWX2MB(const wchar_t *ws)
+{
+ if ( !ws )
+ return wxCharBuffer();
+
+ wxCharBuffer buf(wxConvLibc.cWX2MB(ws));
+ if ( !buf )
+ buf = wxMBConvUTF8(wxMBConvUTF8::MAP_INVALID_UTF8_TO_OCTAL).cWX2MB(ws);
+
+ return buf;
+}
+
+#endif // wxUSE_UNICODE
+
+// ----------------------------------------------------------------------------
+// globals
+// ----------------------------------------------------------------------------
+
+// NB: The reason why we create converted objects in this convoluted way,
+// using a factory function instead of global variable, is that they
+// may be used at static initialization time (some of them are used by
+// wxString ctors and there may be a global wxString object). In other
+// words, possibly _before_ the converter global object would be
+// initialized.
+
+#undef wxConvLibc
+#undef wxConvUTF8
+#undef wxConvUTF7
+#undef wxConvLocal
+#undef wxConvISO8859_1
+
+#define WX_DEFINE_GLOBAL_CONV2(klass, impl_klass, name, ctor_args) \
+ WXDLLIMPEXP_DATA_BASE(klass*) name##Ptr = NULL; \
+ WXDLLIMPEXP_BASE klass* wxGet_##name##Ptr() \
+ { \
+ static impl_klass name##Obj ctor_args; \
+ return &name##Obj; \
+ } \
+ /* this ensures that all global converter objects are created */ \
+ /* by the time static initialization is done, i.e. before any */ \
+ /* thread is launched: */ \
+ static klass* gs_##name##instance = wxGet_##name##Ptr()
+
+#define WX_DEFINE_GLOBAL_CONV(klass, name, ctor_args) \
+ WX_DEFINE_GLOBAL_CONV2(klass, klass, name, ctor_args)
+
+#ifdef __INTELC__
+ // disable warning "variable 'xxx' was declared but never referenced"
+ #pragma warning(disable: 177)
+#endif // Intel C++
+
+#ifdef __WINDOWS__
+ WX_DEFINE_GLOBAL_CONV2(wxMBConv, wxMBConv_win32, wxConvLibc, wxEMPTY_PARAMETER_VALUE);
+#elif 0 // defined(__WXOSX__)
+ WX_DEFINE_GLOBAL_CONV2(wxMBConv, wxMBConv_cf, wxConvLibc, (wxFONTENCODING_UTF8));
+#else
+ WX_DEFINE_GLOBAL_CONV2(wxMBConv, wxMBConvLibc, wxConvLibc, wxEMPTY_PARAMETER_VALUE);
+#endif
+
+// NB: we can't use wxEMPTY_PARAMETER_VALUE as final argument here because it's
+// passed to WX_DEFINE_GLOBAL_CONV2 after a macro expansion and so still
+// provokes an error message about "not enough macro parameters"; and we
+// can't use "()" here as the name##Obj declaration would be parsed as a
+// function declaration then, so use a semicolon and live with an extra
+// empty statement (and hope that no compilers warns about this)
+WX_DEFINE_GLOBAL_CONV(wxMBConvStrictUTF8, wxConvUTF8, ;);
+WX_DEFINE_GLOBAL_CONV(wxMBConvUTF7, wxConvUTF7, ;);
+
+WX_DEFINE_GLOBAL_CONV(wxCSConv, wxConvLocal, (wxFONTENCODING_SYSTEM));
+WX_DEFINE_GLOBAL_CONV(wxCSConv, wxConvISO8859_1, (wxFONTENCODING_ISO8859_1));
+
+WXDLLIMPEXP_DATA_BASE(wxMBConv *) wxConvCurrent = wxGet_wxConvLibcPtr();
+WXDLLIMPEXP_DATA_BASE(wxMBConv *) wxConvUI = wxGet_wxConvLocalPtr();
+
+#ifdef __DARWIN__
+// It is important to use this conversion object under Darwin as it ensures
+// that Unicode strings are (re)composed correctly even though xnu kernel uses
+// decomposed form internally (at least for the file names).
+static wxMBConv_cf wxConvMacUTF8DObj(wxFONTENCODING_UTF8);
+#endif
projects / wxWidgets.git / blobdiff