don't use _T() inside wxGetTranslation() and related macros (wxTRANSLATE, _, ......

[wxWidgets.git] / docs / latex / wx / renderer.tex

diff --git a/docs/latex/wx/renderer.tex b/docs/latex/wx/renderer.tex
index 221f6594259c2d024fee1d8c00c8466286ebde9f..88f6923d74b12472eef31959e3634b87a641a198 100644 (file)
--- a/docs/latex/wx/renderer.tex
+++ b/docs/latex/wx/renderer.tex
@@ -6,7 +6,7 @@
 %% Created:     06.08.03
 %% RCS-ID:      $Id$
 %% Copyright:   (c) 2003 Vadim Zeitlin <vadim@wxwindows.org>
 %% Created:     06.08.03
 %% RCS-ID:      $Id$
 %% Copyright:   (c) 2003 Vadim Zeitlin <vadim@wxwindows.org>

-%% License:     wxWidgets license
+%% License:     wxWindows license

 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
 \section{\class{wxRendererNative}}\label{wxrenderernative}
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
 \section{\class{wxRendererNative}}\label{wxrenderernative}


@@ -14,7 +14,7 @@
 First, a brief introduction to wxRenderer and why it is needed.
 
 Usually wxWidgets uses the underlying low level GUI system to draw all the
 First, a brief introduction to wxRenderer and why it is needed.
 
 Usually wxWidgets uses the underlying low level GUI system to draw all the

-controls -- this is what we mean when we say that it is a ``native'' framework.
+controls - this is what we mean when we say that it is a ``native'' framework.

 However not all controls exist under all (or even any) platforms and in this
 case wxWidgets provides a default, generic, implementation of them written in
 wxWidgets itself.
 However not all controls exist under all (or even any) platforms and in this
 case wxWidgets provides a default, generic, implementation of them written in
 wxWidgets itself.


@@ -52,6 +52,11 @@ the rendering functions should always prepare it.
 combination of the \texttt{wxCONTROL\_XXX} constants below.
 \end{itemize}
 
 combination of the \texttt{wxCONTROL\_XXX} constants below.
 \end{itemize}
 

+Note that each drawing function restores the \helpref{wxDC}{wxdc} attributes if
+it changes them, so it is safe to assume that the same pen, brush and colours
+that were active before the call to this function are still in effect after it.
+
+

 \wxheading{Constants}
 
 The following rendering flags are defined:
 \wxheading{Constants}
 
 The following rendering flags are defined:


@@ -62,13 +67,17 @@ enum
     wxCONTROL_DISABLED   = 0x00000001,  // control is disabled
     wxCONTROL_FOCUSED    = 0x00000002,  // currently has keyboard focus
     wxCONTROL_PRESSED    = 0x00000004,  // (button) is pressed
     wxCONTROL_DISABLED   = 0x00000001,  // control is disabled
     wxCONTROL_FOCUSED    = 0x00000002,  // currently has keyboard focus
     wxCONTROL_PRESSED    = 0x00000004,  // (button) is pressed

-    wxCONTROL_ISDEFAULT  = 0x00000008,  // only applies to the buttons
-    wxCONTROL_ISSUBMENU  = wxCONTROL_ISDEFAULT, // only for menu items
-    wxCONTROL_EXPANDED   = wxCONTROL_ISDEFAULT, // only for the tree items
+    wxCONTROL_SPECIAL    = 0x00000008,  // control-specific bit:
+    wxCONTROL_ISDEFAULT  = wxCONTROL_SPECIAL, // only for the buttons
+    wxCONTROL_ISSUBMENU  = wxCONTROL_SPECIAL, // only for the menu items
+    wxCONTROL_EXPANDED   = wxCONTROL_SPECIAL, // only for the tree items
+    wxCONTROL_SIZEGRIP   = wxCONTROL_SPECIAL, // only for the status bar panes
+    wxCONTROL_FLAT       = wxCONTROL_SPECIAL, // checkboxes only: flat border

     wxCONTROL_CURRENT    = 0x00000010,  // mouse is currently over the control
     wxCONTROL_SELECTED   = 0x00000020,  // selected item in e.g. listbox
     wxCONTROL_CHECKED    = 0x00000040,  // (check/radio button) is checked
     wxCONTROL_CURRENT    = 0x00000010,  // mouse is currently over the control
     wxCONTROL_SELECTED   = 0x00000020,  // selected item in e.g. listbox
     wxCONTROL_CHECKED    = 0x00000040,  // (check/radio button) is checked

-    wxCONTROL_CHECKABLE  = 0x00000080   // (menu) item can be checked
+    wxCONTROL_CHECKABLE  = 0x00000080,  // (menu) item can be checked
+    wxCONTROL_UNDETERMINED = wxCONTROL_CHECKABLE  // (check) undetermined state

 };
 \end{verbatim}
 
 };
 \end{verbatim}
 


@@ -80,6 +89,10 @@ No base class
 
 <wx/renderer.h>
 
 
 <wx/renderer.h>
 

+\wxheading{Library}
+
+\helpref{wxCore}{librarieslist}
+

 
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 
 \latexignore{\rtfignore{\wxheading{Members}}}
 


@@ -91,21 +104,86 @@ No base class
 Virtual destructor as for any base class.
 
 
 Virtual destructor as for any base class.
 
 

-\membersection{wxRendererGeneric::DrawComboBoxDropButton}
+\membersection{wxRendererNative::DrawCheckBox}\label{wxrenderernativedrawcheckbox}
+
+\func{void}{DrawCheckBox}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a check box (used by wxDataViewCtrl).
+
+\arg{flags} may have the \texttt{wxCONTROL\_CHECKED}, \texttt{wxCONTROL\_CURRENT} or
+\texttt{wxCONTROL\_UNDETERMINED} bit set.
+
+
+\membersection{wxRendererNative::DrawComboBoxDropButton}\label{wxrenderernativedrawcomboboxdropbutton}

 
 \func{void}{DrawComboBoxDropButton}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
 
 Draw a button like the one used by \helpref{wxComboBox}{wxcombobox} to show a
 drop down window. The usual appearance is a downwards pointing arrow.
 
 
 \func{void}{DrawComboBoxDropButton}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
 
 Draw a button like the one used by \helpref{wxComboBox}{wxcombobox} to show a
 drop down window. The usual appearance is a downwards pointing arrow.
 

-\arg{flags} may have the \texttt{wxCONTROL\_PRESSED} bit set.
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED} or \texttt{wxCONTROL\_CURRENT} bit set.
+
+
+\membersection{wxRendererNative::DrawDropArrow}\label{wxrenderernativedrawdroparrow}
+
+\func{void}{DrawDropArrow}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a drop down arrow that is suitable for use outside a combo box. Arrow will have
+transparent background.
+
+\arg{rect} is not entirely filled by the arrow. Instead, you should use bounding
+rectangle of a drop down button which arrow matches the size you need.
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED} or \texttt{wxCONTROL\_CURRENT} bit set.
+
+
+\membersection{wxRendererNative::DrawFocusRect}\label{wxrenderernativedrawfocusrect}
+
+\func{void}{DrawFocusRect}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}}
+
+Draw a focus rectangle using the specified rectangle.
+\helpref{wxListCtrl}{wxlistctrl}. The only supported flags is 
+\texttt{wxCONTROL\_SELECTED} for items which are selected.

 
 
 \membersection{wxRendererNative::DrawHeaderButton}\label{wxrenderernativedrawheaderbutton}
 
 
 
 \membersection{wxRendererNative::DrawHeaderButton}\label{wxrenderernativedrawheaderbutton}
 

-\func{void}{DrawHeaderButton}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}}
+\func{int}{DrawHeaderButton}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}, \param{wxHeaderSortIconType }{sortArrow = wxHDR\_SORT\_ICON\_NONE}, \param{wxHeaderButtonParams* }{params = NULL}}
+
+Draw the header control button (used, for example, by
+\helpref{wxListCtrl}{wxlistctrl}).  Depending on platforms the
+\arg{flags} parameter may support the \texttt{wxCONTROL\_SELECTED}
+\texttt{wxCONTROL\_DISABLED} and \texttt{wxCONTROL\_CURRENT} bits.
+The \arg{sortArrow} parameter can be one of
+\texttt{wxHDR\_SORT\_ICON\_NONE}, \texttt{wxHDR\_SORT\_ICON\_UP}, or
+\texttt{wxHDR\_SORT\_ICON\_DOWN}.  Additional values controlling the
+drawing of a text or bitmap label can be passed in \arg{params}.  The
+value returned is the optimal width to contain the the unabreviated
+label text or bitmap, the sort arrow if present, and internal margins.
+
+
+
+\membersection{wxRendererNative::DrawItemSelectionRect}\label{wxrenderernativedrawitemselectionrect}
+
+\func{void}{DrawItemSelectionRect}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}}
+
+Draw a selection rectangle underneath the text as used e.g. in a 
+\helpref{wxListCtrl}{wxlistctrl}. The supported \arg{flags} are
+\texttt{wxCONTROL\_SELECTED} for items which are selected (e.g. often a blue
+rectangle) and \texttt{wxCONTROL\_CURRENT} for the item that has the focus
+(often a dotted line around the item's text). \texttt{wxCONTROL\_FOCUSED} may
+be used to indicate if the control has the focus (othewise the the selection
+rectangle is e.g. often grey and not blue). This may be ignored by the renderer
+or deduced by the code directly from the \arg{win}.

 
 

-Draw the header control button (used by \helpref{wxListCtrl}{wxlistctrl}).
+
+\membersection{wxRendererNative::DrawPushButton}\label{wxrenderernativedrawpushbutton}
+
+\func{void}{DrawPushButton}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a blank push button that looks very similar to \helpref{wxButton}{wxbutton}.
+
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED}, \texttt{wxCONTROL\_CURRENT} or
+\texttt{wxCONTROL\_ISDEFAULT} bit set.

 
 
 \membersection{wxRendererNative::DrawSplitterBorder}\label{wxrenderernativedrawsplitterborder}
 
 
 \membersection{wxRendererNative::DrawSplitterBorder}\label{wxrenderernativedrawsplitterborder}


@@ -122,7 +200,7 @@ well.
 \func{void}{DrawSplitterSash}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxSize\& }{size}, \param{wxCoord }{position}, \param{wxOrientation }{orient}, \param{int }{flags = 0}}
 
 Draw a sash. The \arg{orient} parameter defines whether the sash should be
 \func{void}{DrawSplitterSash}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxSize\& }{size}, \param{wxCoord }{position}, \param{wxOrientation }{orient}, \param{int }{flags = 0}}
 
 Draw a sash. The \arg{orient} parameter defines whether the sash should be

-vertical or horizontal and how should the \arg{position} be interpreted.
+vertical or horizontal and how the \arg{position} should be interpreted.

 
 
 \membersection{wxRendererNative::DrawTreeItemButton}\label{wxrenderernativedrawtreeitembutton}
 
 
 \membersection{wxRendererNative::DrawTreeItemButton}\label{wxrenderernativedrawtreeitembutton}


@@ -159,6 +237,14 @@ is the default renderer implementation, others have platform-specific default
 renderer which can be retrieved by calling \helpref{GetDefault}{wxrenderernativegetdefault}.
 
 
 renderer which can be retrieved by calling \helpref{GetDefault}{wxrenderernativegetdefault}.
 
 

+\membersection{wxRendererNative::GetHeaderButtonHeight}\label{wxrenderernativegetheaderbuttonheight}
+
+\func{int}{GetHeaderButtonHeight}{\param{const wxWindow* }{win}}
+
+Returns the height of a header button, either a fixed platform height if available, or a 
+generic height based on the window's font.
+
+

 \membersection{wxRendererNative::GetSplitterParams}\label{wxrenderernativegetsplitterparams}
 
 \func{wxSplitterRenderParams}{GetSplitterParams}{\param{const wxWindow* }{win}}
 \membersection{wxRendererNative::GetSplitterParams}\label{wxrenderernativegetsplitterparams}
 
 \func{wxSplitterRenderParams}{GetSplitterParams}{\param{const wxWindow* }{win}}