// Licence: wxWindows license
/////////////////////////////////////////////////////////////////////////////
+
+/**
+ Different standard log levels (you may also define your own) used with
+ by standard wxLog functions wxLogError(), wxLogWarning(), etc...
+*/
+enum wxLogLevelValues
+{
+ wxLOG_FatalError, //!< program can't continue, abort immediately
+ wxLOG_Error, //!< a serious error, user must be informed about it
+ wxLOG_Warning, //!< user is normally informed about it but may be ignored
+ wxLOG_Message, //!< normal message (i.e. normal output of a non GUI app)
+ wxLOG_Status, //!< informational: might go to the status line of GUI app
+ wxLOG_Info, //!< informational message (a.k.a. 'Verbose')
+ wxLOG_Debug, //!< never shown to the user, disabled in release mode
+ wxLOG_Trace, //!< trace messages are also only enabled in debug mode
+ wxLOG_Progress, //!< used for progress indicator (not yet)
+ wxLOG_User = 100, //!< user defined levels start here
+ wxLOG_Max = 10000
+};
+
+/**
+ The type used to specify a log level.
+
+ Default values of ::wxLogLevel used by wxWidgets are contained in the
+ ::wxLogLevelValues enumeration.
+*/
+typedef unsigned long wxLogLevel;
+
+/**
+ Information about a log record (unit of the log output).
+ */
+class wxLogRecordInfo
+{
+public:
+ /// The name of the file where this log message was generated.
+ const char *filename;
+
+ /// The line number at which this log message was generated.
+ int line;
+
+ /**
+ The name of the function where the log record was generated.
+
+ This field may be @NULL if the compiler doesn't support @c __FUNCTION__
+ (but most modern compilers do).
+ */
+ const char *func;
+
+ /// Time when the log message was generated.
+ time_t timestamp;
+
+ /**
+ Id of the thread in which the message was generated.
+
+ This field is only available if wxWidgets was built with threads
+ support (<code>wxUSE_THREADS == 1</code>).
+
+ @see wxThread::GetCurrentId()
+ */
+ wxThreadIdType threadId;
+};
+
/**
@class wxLogWindow
Constructs a log target which sends all the log messages to the given
output stream. If it is @NULL, the messages are sent to @c cerr.
*/
- wxLogStream(std::ostream ostr = NULL);
+ wxLogStream(std::ostream *ostr = NULL);
};
@class wxLogStderr
This class can be used to redirect the log messages to a C file stream (not to
- be confused with C++ streams). It is the default log target for the non-GUI
- wxWidgets applications which send all the output to @c stderr.
+ be confused with C++ streams).
+
+ It is the default log target for the non-GUI wxWidgets applications which
+ send all the output to @c stderr.
@library{wxbase}
@category{logging}
class wxLogBuffer : public wxLog
{
public:
+ /**
+ The default ctor does nothing.
+ */
+ wxLogBuffer();
+
/**
Shows all the messages collected so far to the user (using a message box in the
GUI applications or by printing them out to the console in text mode) and
Otherwise, it is completely hidden behind the @e wxLogXXX() functions and
you may not even know about its existence.
+ @note For console-mode applications, the default target is wxLogStderr, so
+ that all @e wxLogXXX() functions print on @c stderr when @c wxUSE_GUI = 0.
+
@section log_derivingyours Deriving your own log target
- There are two functions which must be implemented by any derived class to
- actually process the log messages: DoLog() and DoLogString().
- The second function receives a string which just has to be output in some way
- and the easiest way to write a new log target is to override just this function
- in the derived class.
+ There are several methods which may be overridden in the derived class to
+ customize log messages handling: DoLogRecord(), DoLogTextAtLevel() and
+ DoLogText().
+
+ The last method is the simplest one: you should override it if you simply
+ want to redirect the log output elsewhere, without taking into account the
+ level of the message. If you do want to handle messages of different levels
+ differently, then you should override DoLogTextAtLevel().
- If more control over the output format is needed, then the first function must
- be overridden which allows to construct custom messages depending on the log level
- or even do completely different things depending on the message severity
- (for example, throw away all messages except warnings and errors, show warnings
- on the screen and forward the error messages to the user's (or programmer's) cell
- phone - maybe depending on whether the timestamp tells us if it is day or
- night in the current time zone).
+ Finally, if more control over the output format is needed, then the first
+ function must be overridden as it allows to construct custom messages
+ depending on the log level or even do completely different things depending
+ on the message severity (for example, throw away all messages except
+ warnings and errors, show warnings on the screen and forward the error
+ messages to the user's (or programmer's) cell phone -- maybe depending on
+ whether the timestamp tells us if it is day or night in the current time
+ zone).
There also functions to support message buffering. Why are they needed?
Some of wxLog implementations, most notably the standard wxLogGui class,
Flush() shows them all and clears the buffer contents.
This function doesn't do anything if the buffer is already empty.
- See also:
- @li Flush()
- @li FlushActive()
+ @see FlushActive()
@section log_tracemasks Using trace masks
but may be activated, for example, in order to help the user find some program
problem.
- As for the (real) trace messages, their handling depends on the settings of
- the (application global) @e trace mask which can either be specified using
- SetTraceMask(), GetTraceMask() and wxLogTrace() which takes an integer mask
- or using AddTraceMask() for string trace masks.
+ As for the (real) trace messages, their handling depends on the currently
+ enabled trace masks: if AddTraceMask() was called for the mask of the given
+ message, it will be logged, otherwise nothing happens.
- The difference between bit-wise and string trace masks is that a message using
- integer trace mask will only be logged if all bits of the mask are set in the
- current mask while a message using string mask will be logged simply if the
- mask had been added before to the list of allowed ones.
For example,
-
- @code
- wxLogTrace( wxTraceRefCount|wxTraceOleCalls, "Active object ref count: %d", nRef );
- @endcode
-
- will do something only if the current trace mask contains both @c wxTraceRefCount
- and @c wxTraceOle, but:
-
@code
wxLogTrace( wxTRACE_OleCalls, "IFoo::Bar() called" );
@endcode
wxLog::AddTraceMask( wxTRACE_OleCalls);
@endcode
- Using string masks is simpler and allows you to easily add custom ones, so this
- is the preferred way of working with trace messages. The integer trace mask is
- kept for compatibility and for additional (but very rarely needed) flexibility
- only.
-
The standard trace masks are given in wxLogTrace() documentation.
Finally, the @e wxLog::DoLog() function automatically prepends a time stamp
standard @e strftime() function. For example, the default format is
"[%d/%b/%y %H:%M:%S] " which gives something like "[17/Sep/98 22:10:16] "
(without quotes) for the current date. Setting an empty string as the time
- format disables timestamping of the messages completely.
+ format or calling the shortcut wxLog::DisableTimestamp(), disables timestamping
+ of the messages completely.
See also
@li AddTraceMask()
@li SetRepetitionCounting()
@li GetRepetitionCounting()
- @note Timestamping is disabled for Visual C++ users in debug builds by
+ @note
+ Timestamping is disabled for Visual C++ users in debug builds by
default because otherwise it would be impossible to directly go to the line
from which the log message was generated by simply clicking in the debugger
window on the corresponding error message. If you wish to enable it, please
@section log_target Manipulating the log target
The functions in this section work with and manipulate the active log
- target. The OnLog() is called by the @e wxLogXXX() functions
- and invokes the DoLog() of the active log target if any.
+ target.
Get/Set methods are used to install/query the current active target and,
finally, DontCreateOnDemand() disables the automatic creation of a standard
easily lead to a loss of messages.
See also:
- @li OnLog()
@li GetActiveTarget()
@li SetActiveTarget()
@li DontCreateOnDemand()
*/
static void ClearTraceMasks();
- /**
- Disables time stamping of the log messages.
-
- @since 2.9.0
- */
- static void SetTimestamp(const wxString& format);
-
/**
Instructs wxLog to not create new log targets on the fly if there is none
currently. (Almost) for internal use only: it is supposed to be called by the
*/
static void DontCreateOnDemand();
+ /**
+ Globally enable or disable logging.
+
+ Calling this function with @false argument disables all log messages
+ for the current thread.
+
+ @see wxLogNull, IsEnabled()
+
+ @return
+ The old state, i.e. @true if logging was previously enabled and
+ @false if it was disabled.
+ */
+ static bool EnableLogging(bool enable = true);
+
/**
Shows all the messages currently in buffer and clears it.
+
If the buffer is already empty, nothing happens.
+
+ If you override this method in a derived class, call the base class
+ version first, before doing anything else.
*/
virtual void Flush();
/**
Flushes the current log target if any, does nothing if there is none.
- @see Flush()
+ When this method is called from the main thread context, it also
+ flushes any previously buffered messages logged by the other threads.
+ When it is called from the other threads it simply calls Flush() on the
+ currently active log target, so it mostly makes sense to do this if a
+ thread has its own logger set with SetThreadActiveTarget().
*/
static void FlushActive();
/**
Returns the pointer to the active log target (may be @NULL).
+
+ Notice that if SetActiveTarget() hadn't been previously explicitly
+ called, this function will by default try to create a log target by
+ calling wxAppTraits::CreateLogTarget() which may be overridden in a
+ user-defined traits class to change the default behaviour. You may also
+ call DontCreateOnDemand() to disable this behaviour.
+
+ When this function is called from threads other than main one,
+ auto-creation doesn't happen. But if the thread has a thread-specific
+ log target previously set by SetThreadActiveTarget(), it is returned
+ instead of the global one. Otherwise, the global log target is
+ returned.
*/
static wxLog* GetActiveTarget();
/**
Returns the current log level limit.
+
+ All messages at levels strictly greater than the value returned by this
+ function are not logged at all.
+
+ @see SetLogLevel(), IsLevelEnabled()
*/
static wxLogLevel GetLogLevel();
/**
Returns the current timestamp format string.
*/
- static const wxString GetTimestamp();
+ static const wxString& GetTimestamp();
/**
+ @deprecated
Returns the current trace mask, see Customization() section for details.
*/
static wxTraceMask GetTraceMask();
@see AddTraceMask().
*/
- static const wxArrayString GetTraceMasks();
+ static const wxArrayString& GetTraceMasks();
/**
Returns whether the verbose mode is currently active.
static bool IsAllowedTraceMask(const wxString& mask);
/**
- Forwards the message at specified level to the @e DoLog() function of the
- active log target if there is any, does nothing otherwise.
- */
- static void OnLog(wxLogLevel level, const wxString& message);
+ Returns true if logging is enabled at all now.
+
+ @see IsLevelEnabled(), EnableLogging()
+ */
+ static bool IsEnabled();
+
+ /**
+ Returns true if logging at this level is enabled for the current thread.
+
+ This function only returns @true if logging is globally enabled and if
+ @a level is less than or equal to the maximal log level enabled for the
+ given @a component.
+
+ @see IsEnabled(), SetLogLevel(), GetLogLevel(), SetComponentLevel()
+
+ @since 2.9.1
+ */
+ static bool IsLevelEnabled(wxLogLevel level, wxString component);
/**
Remove the @a mask from the list of allowed masks for
To suppress logging use a new instance of wxLogNull not @NULL. If the
active log target is set to @NULL a new default log target will be
created when logging occurs.
+
+ @see SetThreadActiveTarget()
*/
static wxLog* SetActiveTarget(wxLog* logtarget);
/**
- Specifies that log messages with level logLevel should be ignored
- and not sent to the active log target.
+ Sets the log level for the given component.
+
+ For example, to disable all but error messages from wxWidgets network
+ classes you may use
+ @code
+ wxLog::SetComponentLevel("wx/net", wxLOG_Error);
+ @endcode
+
+ SetLogLevel() may be used to set the global log level.
+
+ @param component
+ Non-empty component name, possibly using slashes (@c /) to separate
+ it into several parts.
+ @param level
+ Maximal level of log messages from this component which will be
+ handled instead of being simply discarded.
+
+ @since 2.9.1
+ */
+ static void SetComponentLevel(const wxString& component, wxLogLevel level);
+
+ /**
+ Specifies that log messages with level greater (numerically) than
+ @a logLevel should be ignored and not sent to the active log target.
+
+ @see SetComponentLevel()
*/
static void SetLogLevel(wxLogLevel logLevel);
*/
static void SetRepetitionCounting(bool repetCounting = true);
+ /**
+ Sets a thread-specific log target.
+
+ The log target passed to this function will be used for all messages
+ logged by the current thread using the usual wxLog functions. This
+ shouldn't be called from the main thread which never uses a thread-
+ specific log target but can be used for the other threads to handle
+ thread logging completely separately; instead of buffering thread log
+ messages in the main thread logger.
+
+ Notice that unlike for SetActiveTarget(), wxWidgets does not destroy
+ the thread-specific log targets when the thread terminates so doing
+ this is your responsibility.
+
+ This method is only available if @c wxUSE_THREADS is 1, i.e. wxWidgets
+ was compiled with threads support.
+
+ @param logger
+ The new thread-specific log target, possibly @NULL.
+ @return
+ The previous thread-specific log target, initially @NULL.
+
+ @since 2.9.1
+ */
+ static wxLog *SetThreadActiveTarget(wxLog *logger);
+
/**
Sets the timestamp format prepended by the default log targets to all
messages. The string may contain any normal characters as well as %
static void SetTimestamp(const wxString& format);
/**
- Sets the trace mask, see @ref log_derivingyours section for details.
+ Disables time stamping of the log messages.
+
+ @since 2.9.0
+ */
+ static void DisableTimestamp();
+
+ /**
+ @deprecated
+ Sets the trace mask, see @ref log_tracemasks section for details.
*/
static void SetTraceMask(wxTraceMask mask);
*/
static void Suspend();
+ /**
+ Log the given record.
+
+ This function should only be called from the DoLog() implementations in
+ the derived classes if they need to call DoLogRecord() on another log
+ object (they can, of course, just use wxLog::DoLogRecord() call syntax
+ to call it on the object itself). It should not be used for logging new
+ messages which can be only sent to the currently active logger using
+ OnLog() which also checks if the logging (for this level) is enabled
+ while this method just directly calls DoLog().
+
+ Example of use of this class from wxLogChain:
+ @code
+ void wxLogChain::DoLogRecord(wxLogLevel level,
+ const wxString& msg,
+ const wxLogRecordInfo& info)
+ {
+ // let the previous logger show it
+ if ( m_logOld && IsPassingMessages() )
+ m_logOld->LogRecord(level, msg, info);
+
+ // and also send it to the new one
+ if ( m_logNew && m_logNew != this )
+ m_logNew->LogRecord(level, msg, info);
+ }
+ @endcode
+
+ @since 2.9.1
+ */
+ void LogRecord(wxLogLevel level, const wxString& msg, time_t timestamp);
+
protected:
+ /**
+ @name Logging callbacks.
+
+ The functions which should be overridden by custom log targets.
+
+ When defining a new log target, you have a choice between overriding
+ DoLogRecord(), which provides maximal flexibility, DoLogTextAtLevel()
+ which can be used if you don't intend to change the default log
+ messages formatting but want to handle log messages of different levels
+ differently or, in the simplest case, DoLogText().
+ */
+ //@{
+
+ /**
+ Called to created log a new record.
+
+ Any log message created by wxLogXXX() functions is passed to this
+ method of the active log target. The default implementation prepends
+ the timestamp and, for some log levels (e.g. error and warning), the
+ corresponding prefix to @a msg and passes it to DoLogTextAtLevel().
+
+ You may override this method to implement custom formatting of the
+ log messages or to implement custom filtering of log messages (e.g. you
+ could discard all log messages coming from the given source file).
+ */
+ virtual void DoLogRecord(wxLogLevel level,
+ const wxString& msg,
+ const wxLogRecordInfo& info);
/**
- Called to process the message of the specified severity. @a msg is the text
- of the message as specified in the call of @e wxLogXXX() function which
- generated it and @a timestamp is the moment when the message was generated.
+ Called to log the specified string at given level.
- The base class version prepends the timestamp to the message, adds a prefix
- corresponding to the log level and then calls
- DoLogString() with the resulting string.
+ The base class versions logs debug and trace messages on the system
+ default debug output channel and passes all the other messages to
+ DoLogText().
*/
- virtual void DoLog(wxLogLevel level, const wxString& msg, time_t timestamp);
+ virtual void DoLogTextAtLevel(wxLogLevel level, const wxString& msg);
/**
- Called to log the specified string. The timestamp is already included in the
- string but still passed to this function.
+ Called to log the specified string.
+
+ A simple implementation might just send the string to @c stdout or
+ @c stderr or save it in a file (of course, the already existing
+ wxLogStderr can be used for this).
- A simple implementation may just send the string to @c stdout or, better,
- @c stderr.
+ The base class version of this function asserts so it must be
+ overridden if you don't override DoLogRecord() or DoLogTextAtLevel().
*/
- virtual void DoLogString(const wxString& msg, time_t timestamp);
+ virtual void DoLogText(const wxString& msg);
+
+ //@}
};
@library{wxbase}
@category{logging}
*/
-class wxLogNull : public wxLog
+class wxLogNull
{
public:
/**
// Global functions/macros
// ============================================================================
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
For all normal, informational messages. They also appear in a message box
void wxVLogMessage(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
For verbose output. Normally, it is suppressed, but might be activated if
void wxVLogVerbose(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
For warnings - they are also normally shown to the user, but don't
void wxVLogWarning(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Like wxLogError(), but also terminates the program with the exit code 3.
void wxVLogFatalError(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
The functions to use for error messages, i.e. the messages that must be
void wxVLogError(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Like wxLogDebug(), trace functions only do something in debug builds and
function is that usually there are a lot of trace messages, so it might
make sense to separate them from other debug messages.
- wxLogDebug(const char*,const char*,...) and
- wxLogDebug(wxTraceMask,const char*,...) can be used instead if you would
- like to be able to separate trace messages into different categories which
- can be enabled or disabled with the static functions provided in wxLog.
+ wxLogTrace(const char*,const char*,...) and can be used instead of
+ wxLogDebug() if you would like to be able to separate trace messages into
+ different categories which can be enabled or disabled with
+ wxLog::AddTraceMask() and wxLog::RemoveTraceMask().
@header{wx/log.h}
*/
-void wxLogTrace(const char* formatString, ... );
-void wxVLogTrace(const char* formatString, va_list argPtr);
+void wxLogTrace(const char *mask, const char* formatString, ... );
+void wxVLogTrace(const char *mask, const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Like wxLogDebug(), trace functions only do something in debug builds and
va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Like wxLogDebug(), trace functions only do something in debug builds and
function is that usually there are a lot of trace messages, so it might
make sense to separate them from other debug messages.
+ @deprecated
This version of wxLogTrace() only logs the message if all the bits
corresponding to the @a mask are set in the wxLog trace mask which can be
set by calling wxLog::SetTraceMask(). This version is less flexible than
- wxLogDebug(const char*,const char*,...) because it doesn't allow defining
+ wxLogTrace(const char*,const char*,...) because it doesn't allow defining
the user trace masks easily. This is why it is deprecated in favour of
using string trace masks.
void wxVLogTrace(wxTraceMask mask, const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
The right functions for debug output. They only do something in debug mode
void wxVLogDebug(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Messages logged by this function will appear in the statusbar of the
void wxVLogStatus(const char* formatString, va_list argPtr);
//@}
-/** @ingroup group_funcmacro_log */
+/** @addtogroup group_funcmacro_log */
//@{
/**
Mostly used by wxWidgets itself, but might be handy for logging errors
projects / wxWidgets.git / blobdiff