#include "wx/cmdproc.h"
-// turn extra wxTextCtrl-specific debugging on/off
-#define WXDEBUG_TEXT
+#if wxDEBUG_LEVEL >= 2
+ // turn extra wxTextCtrl-specific debugging on/off
+ #define WXDEBUG_TEXT
-// turn wxTextCtrl::Replace() debugging on (slows down code a *lot*!)
-#define WXDEBUG_TEXT_REPLACE
-
-#ifndef __WXDEBUG__
- #undef WXDEBUG_TEXT
- #undef WXDEBUG_TEXT_REPLACE
-#endif
+ // turn wxTextCtrl::Replace() debugging on (slows down code a *lot*!)
+ #define WXDEBUG_TEXT_REPLACE
+#endif // wxDEBUG_LEVEL >= 2
// wxStringTokenize only needed for debug checks
#ifdef WXDEBUG_TEXT_REPLACE
// ----------------------------------------------------------------------------
// names of text ctrl commands
-#define wxTEXT_COMMAND_INSERT _T("insert")
-#define wxTEXT_COMMAND_REMOVE _T("remove")
+#define wxTEXT_COMMAND_INSERT wxT("insert")
+#define wxTEXT_COMMAND_REMOVE wxT("remove")
// the value which is never used for text position, even not -1 which is
// sometimes used for some special meaning
// for the first one)
wxTextCoord GetRowStart(wxTextCoord row) const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return row ? m_rowsStart[row - 1] : 0;
}
// be given to us)
wxTextCoord GetRowLength(wxTextCoord row, wxTextCoord lenLine) const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
// note that m_rowsStart[row] is the same as GetRowStart(row + 1) (but
// slightly more efficient) and lenLine is the same as the start of the
// return the width of the row in pixels
wxCoord GetRowWidth(wxTextCoord row) const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowsWidth[row];
}
// return the number of rows
size_t GetRowCount() const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowsStart.GetCount() + 1;
}
// return the number of additional (i.e. after the first one) rows
size_t GetExtraRowCount() const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowsStart.GetCount();
}
// return the first row of this line
wxTextCoord GetFirstRow() const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowFirst;
}
// return the first row of the next line
wxTextCoord GetNextRow() const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowFirst + m_rowsStart.GetCount() + 1;
}
// this just provides direct access to m_rowsStart aerray for efficiency
wxTextCoord GetExtraRowStart(wxTextCoord row) const
{
- wxASSERT_MSG( IsValid(), _T("this line hadn't been laid out") );
+ wxASSERT_MSG( IsValid(), wxT("this line hadn't been laid out") );
return m_rowsStart[row];
}
: GetRowStart(n + 1);
wxASSERT_MSG( colRowEnd < colNextRowStart,
- _T("this column is not in this row at all!") );
+ wxT("this column is not in this row at all!") );
return colRowEnd == colNextRowStart - 1;
}
}
// caller got it wrong
- wxFAIL_MSG( _T("this column is not in the start of the row!") );
+ wxFAIL_MSG( wxT("this column is not in the start of the row!") );
return false;
}
// we don't use these methods as they don't make sense for us as we need a
// wxTextCtrl to be applied
- virtual bool Do() { wxFAIL_MSG(_T("shouldn't be called")); return false; }
- virtual bool Undo() { wxFAIL_MSG(_T("shouldn't be called")); return false; }
+ virtual bool Do() { wxFAIL_MSG(wxT("shouldn't be called")); return false; }
+ virtual bool Undo() { wxFAIL_MSG(wxT("shouldn't be called")); return false; }
// instead, our command processor uses these methods
virtual bool Do(wxTextCtrl *text) = 0;
EVT_SIZE(wxTextCtrl::OnSize)
END_EVENT_TABLE()
-IMPLEMENT_DYNAMIC_CLASS(wxTextCtrl, wxTextCtrlBase)
-
// ----------------------------------------------------------------------------
// creation
// ----------------------------------------------------------------------------
m_isModified = false;
m_isEditable = true;
+ m_wrapLines = false;
m_posLast =
m_curPos =
// create data object for normal multiline or for controls with line
// wrap as needed
if ( style & wxHSCROLL )
+ {
m_data.mdata = new wxTextMultiLineData;
- else
+ }
+ else // we must wrap lines if we don't have horizontal scrollbar
+ {
+ // NB: we can't rely on HasFlag(wxHSCROLL) as the flags can change
+ // later and even wxWindow::Create() itself temporarily resets
+ // wxHSCROLL in wxUniv, so remember that we have a wrapped data
+ // and not just a multi line data in a separate variable
+ m_wrapLines = true;
m_data.wdata = new wxTextWrappedData;
+ }
}
else
{
// we might support it but it's quite useless and other ports don't
// support it anyhow
wxASSERT_MSG( !(style & wxTE_PASSWORD),
- _T("wxTE_PASSWORD can't be used with multiline ctrls") );
+ wxT("wxTE_PASSWORD can't be used with multiline ctrls") );
}
RecalcFontMetrics();
SetValue(value);
- SetBestSize(size);
+ SetInitialSize(size);
m_isEditable = !(style & wxTE_READONLY);
void wxTextCtrl::DoSetValue(const wxString& value, int flags)
{
- if ( IsSingleLine() && (value == GetValue()) )
+ if ( value != GetValue() )
{
- // nothing changed
- return;
- }
+ EventsSuppressor noeventsIf(this, !(flags & SetValue_SendEvent));
- Replace(0, GetLastPosition(), value);
+ Replace(0, GetLastPosition(), value);
- if ( IsSingleLine() )
+ if ( IsSingleLine() )
+ {
+ SetInsertionPoint(0);
+ }
+ }
+ else // nothing changed
{
- SetInsertionPoint(0);
+ // still send event for consistency
+ if ( flags & SetValue_SendEvent )
+ SendTextUpdatedEvent();
}
-
- if ( flags & SetValue_SendEvent )
- SendTextUpdatedEvent();
}
const wxArrayString& wxTextCtrl::GetLines() const
return MData().m_lines.GetCount();
}
-wxString wxTextCtrl::GetValue() const
+wxString wxTextCtrl::DoGetValue() const
{
// for multiline controls we don't always store the total value but only
// recompute it when asked - and to invalidate it we just empty it in
size_t count = lines.GetCount();
for ( size_t n = 1; n < count; n++ )
{
- self->m_value << _T('\n') << lines[n];
+ self->m_value << wxT('\n') << lines[n];
}
}
!PositionToXY(from, &colStart, &lineStart) ||
!PositionToXY(to, &colEnd, &lineEnd) )
{
- wxFAIL_MSG(_T("invalid range in wxTextCtrl::Replace"));
+ wxFAIL_MSG(wxT("invalid range in wxTextCtrl::Replace"));
return;
}
if ( line > lineStart )
{
// from the previous line
- textOrig += _T('\n');
+ textOrig += wxT('\n');
}
textOrig += linesOld[line];
if ( (size_t)colStart == linesOld[lineStart].length() )
{
// text appended, refresh just enough to show the new text
- widthNewText = GetTextWidth(text.BeforeFirst(_T('\n')));
+ widthNewText = GetTextWidth(text.BeforeFirst(wxT('\n')));
}
else // text inserted, refresh till the end of line
{
for ( const wxChar *p = textNew.c_str(); ; p++ )
{
// end of line/text?
- if ( !*p || *p == _T('\n') )
+ if ( !*p || *p == wxT('\n') )
{
lines.Add(wxString(curLineStart, p));
if ( !*p )
#ifdef WXDEBUG_TEXT_REPLACE
// (3a) all empty tokens should be counted as replacing with "foo" and
// with "foo\n" should have different effects
- wxArrayString lines2 = wxStringTokenize(textNew, _T("\n"),
+ wxArrayString lines2 = wxStringTokenize(textNew, wxT("\n"),
wxTOKEN_RET_EMPTY_ALL);
if ( lines2.IsEmpty() )
}
wxASSERT_MSG( lines.GetCount() == lines2.GetCount(),
- _T("Replace() broken") );
+ wxT("Replace() broken") );
for ( size_t n = 0; n < lines.GetCount(); n++ )
{
- wxASSERT_MSG( lines[n] == lines2[n], _T("Replace() broken") );
+ wxASSERT_MSG( lines[n] == lines2[n], wxT("Replace() broken") );
}
#endif // WXDEBUG_TEXT_REPLACE
#ifdef WXDEBUG_TEXT_REPLACE
// optimized code above should give the same result as straightforward
// computation in the beginning
- wxASSERT_MSG( GetValue() == textTotalNew, _T("error in Replace()") );
+ wxASSERT_MSG( GetValue() == textTotalNew, wxT("error in Replace()") );
#endif // WXDEBUG_TEXT_REPLACE
// update the current position: note that we always put the cursor at the
// now call it to do the rest (not related to refreshing)
ClearSelection();
+
+ SendTextUpdatedEventIfAllowed();
}
void wxTextCtrl::Remove(wxTextPos from, wxTextPos to)
void wxTextCtrl::SetInsertionPoint(wxTextPos pos)
{
wxCHECK_RET( pos >= 0 && pos <= GetLastPosition(),
- _T("insertion point position out of range") );
+ wxT("insertion point position out of range") );
// don't do anything if it didn't change
if ( pos != m_curPos )
void wxTextCtrl::MoveInsertionPoint(wxTextPos pos)
{
wxASSERT_MSG( pos >= 0 && pos <= GetLastPosition(),
- _T("DoSetInsertionPoint() can only be called with valid pos") );
+ wxT("DoSetInsertionPoint() can only be called with valid pos") );
m_curPos = pos;
PositionToXY(m_curPos, &m_curCol, &m_curRow);
}
// more probable reason of this would be to forget to update m_posLast
- wxASSERT_MSG( pos == m_posLast, _T("bug in GetLastPosition()") );
+ wxASSERT_MSG( pos == m_posLast, wxT("bug in GetLastPosition()") );
#endif // WXDEBUG_TEXT
pos = m_posLast;
{
// take the end of the first line
sel = GetLines()[lineStart].c_str() + colStart;
- sel += _T('\n');
+ sel += wxT('\n');
// all intermediate ones
for ( wxTextCoord line = lineStart + 1; line < lineEnd; line++ )
{
- sel << GetLines()[line] << _T('\n');
+ sel << GetLines()[line] << wxT('\n');
}
// and the start of the last one
void wxTextCtrl::SetSelection(wxTextPos from, wxTextPos to)
{
// selecting till -1 is the same as selecting to the end
- if ( to == -1 && from != -1 )
+ if ( to == -1 )
{
+ // and selecting (-1, -1) range is the same as selecting everything, by
+ // convention
+ if ( from == -1 )
+ from = 0;
to = GetLastPosition();
}
OrderPositions(from, to);
wxCHECK_RET( to <= GetLastPosition(),
- _T("invalid range in wxTextCtrl::SetSelection") );
+ wxT("invalid range in wxTextCtrl::SetSelection") );
if ( from != m_selStart || to != m_selEnd )
{
m_selStart = from;
m_selEnd = to;
- wxLogTrace(_T("text"), _T("Selection range is %ld-%ld"),
+ wxLogTrace(wxT("text"), wxT("Selection range is %ld-%ld"),
m_selStart, m_selEnd);
// refresh only the part of text which became (un)selected if
{
if ( IsSingleLine() )
{
- wxASSERT_MSG( line == 0, _T("invalid GetLineLength() parameter") );
+ wxASSERT_MSG( line == 0, wxT("invalid GetLineLength() parameter") );
return m_value.length();
}
else // multiline
{
wxCHECK_MSG( (size_t)line < GetLineCount(), -1,
- _T("line index out of range") );
+ wxT("line index out of range") );
return GetLines()[line].length();
}
{
if ( IsSingleLine() )
{
- wxASSERT_MSG( line == 0, _T("invalid GetLineLength() parameter") );
+ wxASSERT_MSG( line == 0, wxT("invalid GetLineLength() parameter") );
return m_value;
}
if (line == 0 && GetLineCount() == 0) return wxEmptyString ;
wxCHECK_MSG( (size_t)line < GetLineCount(), wxEmptyString,
- _T("line index out of range") );
+ wxT("line index out of range") );
return GetLines()[line];
}
#ifdef WXDEBUG_TEXT
wxASSERT_MSG( XYToPosition(pos - posCur, nLine) == pos,
- _T("XYToPosition() or PositionToXY() broken") );
+ wxT("XYToPosition() or PositionToXY() broken") );
#endif // WXDEBUG_TEXT
return true;
wxCoord xCaret, yCaret;
if ( !PositionToDeviceXY(m_curPos, &xCaret, &yCaret) )
{
- wxFAIL_MSG( _T("Caret can't be beyond the text!") );
+ wxFAIL_MSG( wxT("Caret can't be beyond the text!") );
}
return wxPoint(xCaret, yCaret);
{
// finding the last line is easy if each line has exactly
// one row
- yEnd = yStart + rectText.height / GetLineHeight() - 1;
+ yEnd = yStart + rectText.height / GetLineHeight();
}
if ( yEnd < y )
bool wxTextCtrlInsertCommand::Undo(wxTextCtrl *text)
{
- wxCHECK_MSG( CanUndo(), false, _T("impossible to undo insert cmd") );
+ wxCHECK_MSG( CanUndo(), false, wxT("impossible to undo insert cmd") );
// remove the text from where we inserted it
text->Remove(m_from, m_from + m_text.length());
void wxTextCtrl::Undo()
{
// the caller must check it
- wxASSERT_MSG( CanUndo(), _T("can't call Undo() if !CanUndo()") );
+ wxASSERT_MSG( CanUndo(), wxT("can't call Undo() if !CanUndo()") );
m_cmdProcessor->Undo();
}
void wxTextCtrl::Redo()
{
// the caller must check it
- wxASSERT_MSG( CanRedo(), _T("can't call Undo() if !CanUndo()") );
+ wxASSERT_MSG( CanRedo(), wxT("can't call Undo() if !CanUndo()") );
m_cmdProcessor->Redo();
}
WData().m_rowFirstInvalid = 0;
// increase timestamp: this means that the lines which had been
- // laid out before will be relayd out the next time LayoutLines()
+ // laid out before will be relaid out the next time LayoutLines()
// is called because their timestamp will be smaller than the
// current one
WData().m_timestamp++;
{
case wxTE_HT_BEYOND:
// everything is visible
+ SData().m_ofsHorz = 0;
+
+ SData().m_colStart = 0;
SData().m_colLastVisible = text.length();
- // calc it below
+ // calculate it below
SData().m_posLastVisible = -1;
break;
case wxTE_HT_BELOW:
*/
default:
- wxFAIL_MSG(_T("unexpected HitTestLine() return value"));
+ wxFAIL_MSG(wxT("unexpected HitTestLine() return value"));
// fall through
case wxTE_HT_ON_TEXT:
// SData().m_colStart, we need an absolute offset into string
SData().m_colLastVisible += SData().m_colStart;
- wxLogTrace(_T("text"), _T("Last visible column/position is %d/%ld"),
+ wxLogTrace(wxT("text"), wxT("Last visible column/position is %d/%ld"),
(int) SData().m_colLastVisible, (long) SData().m_posLastVisible);
}
wxTextCoord col,
wxTextCoord *colRowStart) const
{
- wxASSERT_MSG( WrapLines(), _T("shouldn't be called") );
+ wxASSERT_MSG( WrapLines(), wxT("shouldn't be called") );
const wxWrappedLineData& lineData = WData().m_linesData[line];
*colRowStart = lineData.GetRowStart(row);
// this can't happen, of course
- wxASSERT_MSG( *colRowStart <= col, _T("GetRowInLine() is broken") );
+ wxASSERT_MSG( *colRowStart <= col, wxT("GetRowInLine() is broken") );
}
return row;
void wxTextCtrl::LayoutLines(wxTextCoord lineLast) const
{
- wxASSERT_MSG( WrapLines(), _T("should only be used for line wrapping") );
+ wxASSERT_MSG( WrapLines(), wxT("should only be used for line wrapping") );
// if we were called, some line was dirty and if it was dirty we must have
// had m_rowFirstInvalid set to something too
wxTextCoord lineFirst = WData().m_rowFirstInvalid;
- wxASSERT_MSG( lineFirst != -1, _T("nothing to layout?") );
+ wxASSERT_MSG( lineFirst != -1, wxT("nothing to layout?") );
wxTextCoord rowFirst, rowCur;
if ( lineFirst )
wxCoord *widthReal) const
{
// this function is slow, it shouldn't be called unless really needed
- wxASSERT_MSG( WrapLines(), _T("shouldn't be called") );
+ wxASSERT_MSG( WrapLines(), wxT("shouldn't be called") );
wxString s(text);
wxTextCoord col;
case wxTE_HT_BELOW:
*/
default:
- wxFAIL_MSG(_T("unexpected HitTestLine() return value"));
+ wxFAIL_MSG(wxT("unexpected HitTestLine() return value"));
// fall through
case wxTE_HT_ON_TEXT:
}
// this is not supposed to happen
- wxASSERT_MSG( matchDir, _T("logic error in wxTextCtrl::HitTest") );
+ wxASSERT_MSG( matchDir, wxT("logic error in wxTextCtrl::HitTest") );
if ( matchDir == Match_Right )
col++;
dc.GetTextExtent(text, &width2, NULL);
wxASSERT_MSG( (width1 <= x) && (x < width2),
- _T("incorrect HitTestLine() result") );
+ wxT("incorrect HitTestLine() result") );
}
else // we return last char
{
- wxASSERT_MSG( x >= width1, _T("incorrect HitTestLine() result") );
+ wxASSERT_MSG( x >= width1, wxT("incorrect HitTestLine() result") );
}
}
#endif // WXDEBUG_TEXT
fine for vertical scrolling as all lines have the same height but is rather
ugly for horizontal scrolling if proportional font is used. This is why we
manually update and use SData().m_ofsHorz which contains the length of the string
- which is hidden beyond the left borde. An important property of text
+ which is hidden beyond the left border. An important property of text
controls using this kind of scrolling is that an entire number of characters
is always shown and that parts of characters never appear on display -
neither in the leftmost nor rightmost positions.
void wxTextCtrl::ShowHorzPosition(wxCoord pos)
{
- wxASSERT_MSG( IsSingleLine(), _T("doesn't work for multiline") );
+ wxASSERT_MSG( IsSingleLine(), wxT("doesn't work for multiline") );
// pos is the logical position to show
- // SData().m_ofsHorz is the fisrt logical position shown
+ // SData().m_ofsHorz is the first logical position shown
if ( pos < SData().m_ofsHorz )
{
// scroll backwards
void wxTextCtrl::ScrollText(wxTextCoord col)
{
wxASSERT_MSG( IsSingleLine(),
- _T("ScrollText() is for single line controls only") );
+ wxT("ScrollText() is for single line controls only") );
// never scroll beyond the left border
if ( col < 0 )
void wxTextCtrl::RecalcMaxWidth()
{
- wxASSERT_MSG( !IsSingleLine(), _T("only used for multiline") );
+ wxASSERT_MSG( !IsSingleLine(), wxT("only used for multiline") );
MData().m_widthMax = -1;
(void)GetMaxWidth();
}
}
- wxASSERT_MSG( MData().m_widthMax != -1, _T("should have at least 1 line") );
+ wxASSERT_MSG( MData().m_widthMax != -1, wxT("should have at least 1 line") );
return MData().m_widthMax;
}
void wxTextCtrl::UpdateScrollbars()
{
- wxASSERT_MSG( !IsSingleLine(), _T("only used for multiline") );
+ wxASSERT_MSG( !IsSingleLine(), wxT("only used for multiline") );
wxSize size = GetRealTextArea().GetSize();
if ( scrollRangeXOld )
{
- x *= scrollRangeX - m_rectText.width / charWidth;
- x /= scrollRangeXOld - m_rectText.width / charWidth;
+ const int w = m_rectText.width / charWidth;
+ if ( w != scrollRangeXOld )
+ {
+ x *= scrollRangeX - w;
+ x /= scrollRangeXOld - w;
+ }
Scroll(x, y);
}
void wxTextCtrl::RefreshLineRange(wxTextCoord lineFirst, wxTextCoord lineLast)
{
wxASSERT_MSG( lineFirst <= lineLast || !lineLast,
- _T("no lines to refresh") );
+ wxT("no lines to refresh") );
wxRect rect;
// rect.x is already 0
// lineFirst may be beyond the last line only if we refresh till
// the end, otherwise it's illegal
wxASSERT_MSG( lineFirst == GetNumberOfLines() && !lineLast,
- _T("invalid line range") );
+ wxT("invalid line range") );
rowFirst = GetRowAfterLine(lineFirst - 1);
}
void wxTextCtrl::RefreshTextRange(wxTextPos start, wxTextPos end)
{
wxCHECK_RET( start != -1 && end != -1,
- _T("invalid RefreshTextRange() arguments") );
+ wxT("invalid RefreshTextRange() arguments") );
// accept arguments in any order as it is more conenient for the caller
OrderPositions(start, end);
wxString text = GetLineText(line);
wxASSERT_MSG( (size_t)start <= text.length() && count,
- _T("invalid RefreshColRange() parameter") );
+ wxT("invalid RefreshColRange() parameter") );
RefreshPixelRange(line,
GetTextWidth(text.Left((size_t)start)),
if ( rect.y < m_rectText.y )
rect.y = m_rectText.y;
- wxLogTrace(_T("text"), _T("Refreshing (%d, %d)-(%d, %d)"),
+ wxLogTrace(wxT("text"), wxT("Refreshing (%d, %d)-(%d, %d)"),
rect.x, rect.y, rect.x + rect.width, rect.y + rect.height);
Refresh(true, &rect);
{
wxString textShown;
if ( IsPassword() )
- textShown = wxString(_T('*'), text.length());
+ textShown = wxString(wxT('*'), text.length());
else
textShown = text;
if ( (ht == wxTE_HT_BEYOND) || (ht == wxTE_HT_BELOW) )
{
- wxASSERT_MSG( line <= lineEnd, _T("how did we get that far?") );
+ wxASSERT_MSG( line <= lineEnd, wxT("how did we get that far?") );
if ( line == lineEnd )
{
}
// calculate the text coords on screen
- wxASSERT_MSG( colStart >= colRowStart, _T("invalid string part") );
+ wxASSERT_MSG( colStart >= colRowStart, wxT("invalid string part") );
wxCoord ofsStart = GetTextWidth(
textLine.Mid(colRowStart,
colStart - colRowStart));
// do draw the text
renderer->DrawTextLine(dc, text, rectText, selStart, selEnd,
GetStateFlags());
- wxLogTrace(_T("text"), _T("Line %ld: positions %ld-%ld redrawn."),
+ wxLogTrace(wxT("text"), wxT("Line %ld: positions %ld-%ld redrawn."),
line, colStart, colEnd);
}
}
void wxTextCtrl::DoDrawLineWrapMarks(wxDC& dc, const wxRect& rectUpdate)
{
wxASSERT_MSG( WrapLines() && WData().m_widthMark,
- _T("shouldn't be called at all") );
+ wxT("shouldn't be called at all") );
wxRenderer *renderer = GetRenderer();
// FIXME: is this really a bug in wxMSW?
rectTextArea.width--;
#endif // __WXMSW__
+ dc.DestroyClippingRegion();
dc.SetClippingRegion(rectTextArea);
// adjust for scrolling
else
{
// read only controls don't have the caret
- caret = (wxCaret *)NULL;
+ caret = NULL;
}
// SetCaret() will delete the old caret if any
wxTextPos wxTextCtrl::GetPositionAbove()
{
wxCHECK_MSG( !IsSingleLine(), INVALID_POS_VALUE,
- _T("can't move cursor vertically in a single line control") );
+ wxT("can't move cursor vertically in a single line control") );
// move the cursor up by one ROW not by one LINE: this means that
// we should really use HitTest() and not just go to the same
wxTextPos wxTextCtrl::GetPositionBelow()
{
wxCHECK_MSG( !IsSingleLine(), INVALID_POS_VALUE,
- _T("can't move cursor vertically in a single line control") );
+ wxT("can't move cursor vertically in a single line control") );
// see comments for wxACTION_TEXT_UP
wxPoint pt = GetCaretPosition() - m_rectText.GetPosition();
// the command this action corresponds to or NULL if this action doesn't
// change text at all or can't be undone
- wxTextCtrlCommand *command = (wxTextCtrlCommand *)NULL;
+ wxTextCtrlCommand *command = NULL;
wxString action;
bool del = false,
if ( textChanged )
{
- wxASSERT_MSG( IsEditable(), _T("non editable control changed?") );
+ wxASSERT_MSG( IsEditable(), wxT("non editable control changed?") );
wxCommandEvent event(wxEVT_COMMAND_TEXT_UPDATED, GetId());
InitCommandEvent(event);
}
else // interpret <Enter> normally: insert new line
{
- PerformAction(wxACTION_TEXT_INSERT, -1, _T('\n'));
+ PerformAction(wxACTION_TEXT_INSERT, -1, wxT('\n'));
}
}
else if ( keycode < 255 && isprint(keycode) )
}
#endif
}
-#ifdef __WXDEBUG__
+#if wxDEBUG_LEVEL >= 2
// Ctrl-R refreshes the control in debug mode
else if ( event.ControlDown() && event.GetKeyCode() == 'r' )
Refresh();
-#endif // __WXDEBUG__
+#endif // wxDEBUG_LEVEL >= 2
event.Skip();
}
wxStdTextCtrlInputHandler::wxStdTextCtrlInputHandler(wxInputHandler *inphand)
: wxStdInputHandler(inphand)
{
- m_winCapture = (wxTextCtrl *)NULL;
+ m_winCapture = NULL;
}
/* static */
{
if ( event.LeftDown() )
{
- wxASSERT_MSG( !m_winCapture, _T("left button going down twice?") );
+ wxASSERT_MSG( !m_winCapture, wxT("left button going down twice?") );
wxTextCtrl *text = wxStaticCast(consumer->GetInputWindow(), wxTextCtrl);
m_winCapture->ShowCaret();
m_winCapture->ReleaseMouse();
- m_winCapture = (wxTextCtrl *)NULL;
+ m_winCapture = NULL;
}
}
projects / wxWidgets.git / blobdiff