dnl initialization
dnl ---------------------------------------------------------------------------
-AC_INIT([wxWidgets], [2.9.0], [wx-dev@lists.wxwidgets.org])
+AC_INIT([wxWidgets], [2.9.1], [wx-dev@lists.wxwidgets.org])
dnl the file passed to AC_CONFIG_SRCDIR should be specific to our package
AC_CONFIG_SRCDIR([wx-config.in])
-dnl sets build, host, target variables and the same with _alias
+dnl sets build, host variables and the same with _alias
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
-AC_CANONICAL_TARGET
+dnl notice that if --host was given but --build was not, cross_compiling is
+dnl only set to "maybe" and not "yes" and will be either set to "yes" later or
+dnl configure will exit with error in AC_PROG_CC so don't test for = "yes" here
+if test "$cross_compiling" != "no"; then
+ HOST_PREFIX="${host_alias}-"
+ HOST_SUFFIX="-$host_alias"
+else
+ HOST_PREFIX=
+ HOST_SUFFIX=
+fi
dnl When making releases do:
dnl
wx_major_version_number=2
wx_minor_version_number=9
-wx_release_number=0
+wx_release_number=1
wx_subrelease_number=0
WX_RELEASE=$wx_major_version_number.$wx_minor_version_number
dnl the list of all available toolkits
dnl
dnl update NUM_TOOLKITS calculation below when adding a new toolkit here!
-ALL_TOOLKITS="COCOA GTK OSX_CARBON OSX_COCOA MGL MICROWIN MOTIF MSW PM X11 DFB"
+ALL_TOOLKITS="COCOA GTK OSX_CARBON OSX_COCOA OSX_IPHONE MGL MICROWIN MOTIF MSW PM X11 DFB"
dnl NB: these wxUSE_XXX constants have value of 0 or 1 unlike all the other ones
dnl which are either yes or no
-DEFAULT_wxUSE_COCOA=0
+DEFAULT_wxUSE_OLD_COCOA=0
DEFAULT_wxUSE_GTK=0
DEFAULT_wxUSE_OSX_CARBON=0
DEFAULT_wxUSE_OSX_COCOA=0
+DEFAULT_wxUSE_OSX_IPHONE=0
DEFAULT_wxUSE_MGL=0
DEFAULT_wxUSE_MICROWIN=0
DEFAULT_wxUSE_MOTIF=0
dnl these are the values which are really default for the given platform:
dnl they're used if no --with-<toolkit> options were given to detect the
dnl toolkit to use by default for the target platform
-DEFAULT_DEFAULT_wxUSE_COCOA=0
+DEFAULT_DEFAULT_wxUSE_OLD_COCOA=0
DEFAULT_DEFAULT_wxUSE_GTK=0
DEFAULT_DEFAULT_wxUSE_OSX_CARBON=0
DEFAULT_DEFAULT_wxUSE_OSX_COCOA=0
+DEFAULT_DEFAULT_wxUSE_OSX_IPHONE=0
DEFAULT_DEFAULT_wxUSE_MGL=0
DEFAULT_DEFAULT_wxUSE_MICROWIN=0
DEFAULT_DEFAULT_wxUSE_MOTIF=0
PROGRAM_EXT=
SAMPLES_RPATH_FLAG=
-SAMPLES_RPATH_POSTLINK=
+DYLIB_RPATH_INSTALL=
+DYLIB_RPATH_POSTLINK=
DEFAULT_STD_FLAG=yes
AC_DEFINE(__SVR4__)
DEFAULT_DEFAULT_wxUSE_MOTIF=1
;;
+ *-*-qnx*)
+ USE_QNX=1
+ AC_DEFINE(__QNX__)
+ DEFAULT_DEFAULT_wxUSE_X11=1
+ ;;
*-*-solaris2* )
USE_SUN=1
USE_SOLARIS=1
DEFAULT_STD_FLAG=no
;;
+ arm-apple-darwin*)
+ dnl iPhone
+ USE_BSD=1
+ USE_DARWIN=1
+ AC_DEFINE(__BSD__)
+ AC_DEFINE(__DARWIN__)
+ DEFAULT_DEFAULT_wxUSE_OSX_IPHONE=1
+ ;;
+
*-*-darwin* )
dnl Darwin based distributions (including Mac OS X)
USE_BSD=1
AC_DEFINE(__DARWIN__)
AC_DEFINE(TARGET_CARBON)
DEFAULT_DEFAULT_wxUSE_OSX_CARBON=1
- DEFAULT_STD_FLAG=no
- ;;
- powerpc-apple-macos* )
- dnl Classic Mac OS (< X)
- USE_UNIX=0
- dnl For some reason the test that should be cross-compiler capable fails
- dnl However, there is no doubt that MacOS PowerPC is big endian.
- ac_cv_c_bigendian=yes
- dnl AC_DEFINE(TARGET_CARBON)
- dnl platform.h needs TARGET_CARBON before setup.h, we'll add it to CPPFLAGS
- DEFAULT_DEFAULT_wxUSE_OSX_CARBON=1
- DEFAULT_STD_FLAG=no
;;
*-*-beos* )
DEFAULT_wxUSE_DMALLOC=no
DEFAULT_wxUSE_LIBGNOMEVFS=no
DEFAULT_wxUSE_LIBHILDON=no
+DEFAULT_wxUSE_LIBHILDON2=no
DEFAULT_wxUSE_LIBMSPACK=no
DEFAULT_wxUSE_LIBSDL=no
dnl features disabled by default
DEFAULT_wxUSE_ACCESSIBILITY=no
-DEFAULT_wxUSE_GRAPHICS_CONTEXT=no
DEFAULT_wxUSE_IPV6=no
-DEFAULT_wxUSE_TAB_DIALOG=no
DEFAULT_wxUSE_GSTREAMER8=no
+DEFAULT_wxUSE_UIACTIONSIMULATOR=no
dnl automatic features
DEFAULT_wxUSE_UNICODE_UTF8=auto
DEFAULT_wxUSE_OPENGL=auto
DEFAULT_wxUSE_MEDIACTRL=auto
+DEFAULT_wxUSE_COMPILER_TLS=auto
DEFAULT_wxUSE_UNICODE_UTF8_LOCALE=no
WX_ARG_DISABLE(all-features,[ --disable-all-features disable all optional features to build minimal library], wxUSE_ALL_FEATURES)
+if test "$wxUSE_ALL_FEATURES" = "no"; then
+ dnl this is a bit ugly but currently we have no choice but to manually
+ dnl reset all the options with default value of auto if all features are to
+ dnl be disabled because we can't have an option with default value of
+ dnl "auto-or-no-if-wxUSE_ALL_FEATURES-is-disabled"
+ DEFAULT_wxUSE_MEDIACTRL=no
+fi
+
dnl ---------------------------------------------------------------------------
dnl port selection
dnl ---------------------------------------------------------------------------
dnl shouldn't default to wxUSE_ALL_FEATURES
AC_ARG_WITH(gtk, [[ --with-gtk[=VERSION] use GTK+, VERSION can be 2 (default), 1 or "any"]], [wxUSE_GTK="$withval" CACHE_GTK=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(motif, [ --with-motif use Motif/Lesstif], [wxUSE_MOTIF="$withval" CACHE_MOTIF=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(osx_carbon, [ --with-osx_carbon use Mac OS X (Carbon) ], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(osx_cocoa, [ --with-osx_cocoa use Mac OS X (Cocoa) ], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(mac, [ --with-mac use Mac OS X (Default) ], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
-AC_ARG_WITH(cocoa, [ --with-cocoa use Cocoa], [wxUSE_COCOA="$withval" CACHE_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_carbon, [ --with-osx_carbon use Mac OS X (Carbon)], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_cocoa, [ --with-osx_cocoa use Mac OS X (Cocoa)], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx_iphone, [ --with-osx_iphone use iPhone OS X port], [wxUSE_OSX_IPHONE="$withval" CACHE_OSX_IPHONE=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(osx, [ --with-osx use Mac OS X (default port, currently Carbon)], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(carbon, [ --with-carbon same as --with-osx_carbon], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(cocoa, [ --with-cocoa same as --with-osx_cocoa], [wxUSE_OSX_COCOA="$withval" CACHE_OSX_COCOA=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(iphone, [ --with-iphone same as --with-osx_iphone], [wxUSE_OSX_IPHONE="$withval" CACHE_OSX_IPHONE=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(mac, [ --with-mac same as --with-osx], [wxUSE_OSX_CARBON="$withval" CACHE_OSX_CARBON=1 TOOLKIT_GIVEN=1])
+AC_ARG_WITH(old_cocoa, [ --with-old_cocoa use old, deprecated, Cocoa port], [wxUSE_OLD_COCOA="$withval" CACHE_OLD_COCOA=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(wine, [ --with-wine use Wine], [wxUSE_WINE="$withval" CACHE_WINE=1])
AC_ARG_WITH(msw, [ --with-msw use MS-Windows], [wxUSE_MSW="$withval" CACHE_MSW=1 TOOLKIT_GIVEN=1])
AC_ARG_WITH(pm, [ --with-pm use OS/2 Presentation Manager], [wxUSE_PM="$withval" CACHE_PM=1 TOOLKIT_GIVEN=1])
dnl we suppose that expr is available (maybe there is a better way to do
dnl this? what about using ALL_TOOLKITS? TODO)
- NUM_TOOLKITS=`expr ${wxUSE_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_OSX_CARBON:-0} \
- + ${wxUSE_OSX_COCOA:-0} + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} \
+ NUM_TOOLKITS=`expr ${wxUSE_OLD_COCOA:-0} + ${wxUSE_GTK:-0} + ${wxUSE_OSX_CARBON:-0} \
+ + ${wxUSE_OSX_COCOA:-0} + ${wxUSE_OSX_IPHONE:-0} + ${wxUSE_MGL:-0} + ${wxUSE_DFB:-0} \
+ ${wxUSE_MICROWIN:-0} + ${wxUSE_MOTIF:-0} + ${wxUSE_MSW:-0} + ${wxUSE_X11:-0}`
dnl Allow wxUSE_PM only for OS/2 with EMX.
# to be removed when --disable-gtk2 isn't needed
if test "x$wxUSE_GTK2" = "xyes"; then
wxGTK_VERSION=2
+ wxUSE_GTK1=0
elif test "x$wxUSE_GTK2" = "xno"; then
wxGTK_VERSION=1
+ wxUSE_GTK1=1
fi
for toolkit in $ALL_TOOLKITS; do
fi
wxUSE_MAC=0
-if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1; then
+if test "$wxUSE_OSX_CARBON" = 1 \
+ -o "$wxUSE_OSX_COCOA" = 1 \
+ -o "$wxUSE_OSX_IPHONE" = 1; then
wxUSE_MAC=1
fi
WX_ARG_WITHOUT(gtkprint, [ --without-gtkprint don't use GTK printing support], wxUSE_GTKPRINT)
WX_ARG_WITHOUT(gnomeprint, [ --without-gnomeprint don't use GNOME printing libraries], wxUSE_LIBGNOMEPRINT)
WX_ARG_WITH(gnomevfs, [ --with-gnomevfs use GNOME VFS for associating MIME types], wxUSE_LIBGNOMEVFS)
-WX_ARG_WITH(hildon, [ --with-hildon use Hildon framework for Nokia 770], wxUSE_LIBHILDON)
+WX_ARG_WITH(hildon, [ --with-hildon use Hildon framework for Nokia 770/800/810], wxUSE_LIBHILDON)
WX_ARG_WITH(opengl, [ --with-opengl use OpenGL (or Mesa)], wxUSE_OPENGL)
fi
])
AC_MSG_RESULT([$wxUSE_MACOSX_VERSION_MIN])
+dnl ---------------------------------------------------------------------------
+dnl debugging options
+dnl ---------------------------------------------------------------------------
+
+dnl don't use WX_ARG_ENABLE as it just gets in the way instead of helping with
+dnl this rather unusual option
+AC_MSG_CHECKING([for --enable-debug])
+AC_ARG_ENABLE(debug, [ --enable-debug build library for debugging],
+ [
+ if test "$enableval" = yes; then
+ wxUSE_DEBUG=yes
+ elif test "$enableval" = no; then
+ wxUSE_DEBUG=no
+ elif test "$enableval" = max; then
+ wxUSE_DEBUG=yes
+ WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -DwxDEBUG_LEVEL=2"
+ else
+ AC_MSG_ERROR([Invalid --enable-debug value, must be yes, no or max])
+ fi
+ ],
+ wxUSE_DEBUG=default
+)
+
+case "$wxUSE_DEBUG" in
+ yes)
+ dnl build the library for debugging: enable debugging code and generate
+ dnl the debug information for the library itself
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=yes
+
+ dnl also disable optimizations by default if --enable-debug was used
+ dnl (this can still be overridden by an explicit --enable-optimise)
+ DEFAULT_wxUSE_OPTIMISE=no
+ ;;
+
+ no)
+ dnl --disable-debug is equivalent to both --disable-debug_flag and
+ dnl --disable-debug_info
+ DEFAULT_wxUSE_DEBUG_FLAG=no
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ ;;
+
+ default)
+ dnl the library is built with debugging support by default but without
+ dnl debug information as this requires much, much more disk space
+ DEFAULT_wxUSE_DEBUG_FLAG=yes
+ DEFAULT_wxUSE_DEBUG_INFO=no
+ ;;
+esac
+
+WX_ARG_DISABLE(debug_flag, [ --disable-debug_flag disable all debugging support], wxUSE_DEBUG_FLAG)
+WX_ARG_ENABLE(debug_info, [ --enable-debug_info generate debug information], wxUSE_DEBUG_INFO)
+
+dnl enabled if just --enable-debug_{flag,info} was
+dnl
+dnl in any case, only set the default value and allow overriding it with an
+
+WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
+WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt obsolete, don't use: use wxDebugContext], wxUSE_DEBUG_CONTEXT)
+WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing obsolete, don't use: create code with memory tracing], wxUSE_MEM_TRACING)
+
dnl ---------------------------------------------------------------------------
dnl global compile options
dnl ---------------------------------------------------------------------------
WX_ARG_DISABLE(shared, [ --disable-shared create static library instead of shared], wxUSE_SHARED)
-WX_ARG_ENABLE(debug, [ --enable-debug same as debug_flag and debug_info], wxUSE_DEBUG)
WX_ARG_ENABLE(stl, [ --enable-stl use STL for containers], wxUSE_STL)
WX_ARG_ENABLE(std_iostreams, [ --enable-std_iostreams use standard C++ stream classes], wxUSE_STD_IOSTREAM)
WX_ARG_ENABLE(std_string, [ --enable-std_string use standard C++ string classes], wxUSE_STD_STRING)
WX_ARG_ENABLE(omf, [ --enable-omf use OMF object format], wxUSE_OMF)
fi
-dnl --enablle-debug is equivalent to both --enable-debug_flag and
-dnl --enable-debug_info
-if test "$wxUSE_DEBUG" = "yes"; then
- DEFAULT_wxUSE_DEBUG_FLAG=yes
- DEFAULT_wxUSE_DEBUG_INFO=yes
- BUILD=debug
-elif test "$wxUSE_DEBUG" = "no"; then
- DEFAULT_wxUSE_DEBUG_FLAG=no
- DEFAULT_wxUSE_DEBUG_INFO=no
- BUILD=release
-fi
-
-WX_ARG_ENABLE(debug_flag, [ --enable-debug_flag set __WXDEBUG__ flag (recommended for developers!)], wxUSE_DEBUG_FLAG)
-WX_ARG_ENABLE(debug_info, [ --enable-debug_info create code with debugging information], wxUSE_DEBUG_INFO)
-
-dnl it's important to also do it in the other direction to get the correct
-dnl output in the configure summary (which uses wxUSE_DEBUG)
-if test "$wxUSE_DEBUG_FLAG" = "yes" -a "$wxUSE_DEBUG_INFO" = "yes"; then
- wxUSE_DEBUG=yes
- BUILD=debug
-fi
-
-dnl disable optimizations by default if --enable-debug was used but leave them
-dnl enabled if just --enable-debug_{flag,info} was
-dnl
-dnl in any case, only set the default value and allow overriding it with an
-dnl explicit --enable-optimise
-if test "$wxUSE_DEBUG" = "yes"; then
- DEFAULT_wxUSE_OPTIMISE=no
-fi
-
WX_ARG_DISABLE(optimise, [ --disable-optimise compile without optimisations], wxUSE_OPTIMISE)
-WX_ARG_ENABLE(debug_gdb, [ --enable-debug_gdb create code with extra GDB debugging information], wxUSE_DEBUG_GDB)
-WX_ARG_ENABLE(debug_cntxt, [ --enable-debug_cntxt use wxDebugContext], wxUSE_DEBUG_CONTEXT)
-WX_ARG_ENABLE(mem_tracing, [ --enable-mem_tracing create code with memory tracing], wxUSE_MEM_TRACING)
WX_ARG_ENABLE(profile, [ --enable-profile create code with profiling information], wxUSE_PROFILE)
WX_ARG_ENABLE(no_rtti, [ --enable-no_rtti create code without RTTI information], wxUSE_NO_RTTI)
WX_ARG_ENABLE(no_exceptions, [ --enable-no_exceptions create code without C++ exceptions handling], wxUSE_NO_EXCEPTIONS)
WX_ARG_ENABLE(objc_uniquifying,[ --enable-objc_uniquifying enable Objective-C class name uniquifying], wxUSE_OBJC_UNIQUIFYING)
WX_ARG_DISABLE(visibility, [ --disable-visibility disable use of ELF symbols visibility even if supported], wxUSE_VISIBILITY)
+WX_ARG_DISABLE(tls, [ --disable-tls disable use of compiler TLS support], wxUSE_COMPILER_TLS)
dnl ---------------------------------------------------------------------------
dnl optional non GUI features
WX_ARG_FEATURE(selectloop, [ --enable-selectloop use wxSelectDispatcher class], wxUSE_SELECT_DISPATCHER)
dnl please keep the settings below in alphabetical order
+WX_ARG_FEATURE(any, [ --enable-any use wxAny class], wxUSE_ANY)
WX_ARG_FEATURE(apple_ieee, [ --enable-apple_ieee use the Apple IEEE codec], wxUSE_APPLE_IEEE)
WX_ARG_FEATURE(arcstream, [ --enable-arcstream use wxArchive streams], wxUSE_ARCHIVE_STREAMS)
WX_ARG_FEATURE(base64, [ --enable-base64 use base64 encoding/decoding functions], wxUSE_BASE64)
WX_ARG_FEATURE(exceptions, [ --enable-exceptions build exception-safe library], wxUSE_EXCEPTIONS)
WX_ARG_FEATURE(ffile, [ --enable-ffile use wxFFile class], wxUSE_FFILE)
WX_ARG_FEATURE(file, [ --enable-file use wxFile class], wxUSE_FILE)
+WX_ARG_FEATURE(filehistory, [ --enable-filehistory use wxFileHistory class], wxUSE_FILE_HISTORY)
WX_ARG_FEATURE(filesystem, [ --enable-filesystem use virtual file systems classes], wxUSE_FILESYSTEM)
WX_ARG_FEATURE(fontenum, [ --enable-fontenum use wxFontEnumerator class], wxUSE_FONTENUM)
WX_ARG_FEATURE(fontmap, [ --enable-fontmap use font encodings conversion classes], wxUSE_FONTMAP)
WX_ARG_FEATURE(fs_archive, [ --enable-fs_archive use virtual archive filesystems], wxUSE_FS_ARCHIVE)
WX_ARG_FEATURE(fs_inet, [ --enable-fs_inet use virtual HTTP/FTP filesystems], wxUSE_FS_INET)
WX_ARG_FEATURE(fs_zip, [ --enable-fs_zip now replaced by fs_archive], wxUSE_FS_ZIP)
+WX_ARG_FEATURE(fswatcher, [ --enable-fswatcher use wxFileSystemWatcher class], wxUSE_FSWATCHER)
WX_ARG_FEATURE(geometry, [ --enable-geometry use geometry class], wxUSE_GEOMETRY)
WX_ARG_FEATURE(log, [ --enable-log use logging system], wxUSE_LOG)
WX_ARG_FEATURE(longlong, [ --enable-longlong use wxLongLong class], wxUSE_LONGLONG)
WX_ARG_FEATURE(stdpaths, [ --enable-stdpaths use wxStandardPaths class], wxUSE_STDPATHS)
WX_ARG_FEATURE(stopwatch, [ --enable-stopwatch use wxStopWatch class], wxUSE_STOPWATCH)
WX_ARG_FEATURE(streams, [ --enable-streams use wxStream etc classes], wxUSE_STREAMS)
-WX_ARG_FEATURE(system_options,[ --enable-sysoptions use wxSystemOptions], wxUSE_SYSTEM_OPTIONS)
+WX_ARG_FEATURE(sysoptions, [ --enable-sysoptions use wxSystemOptions], wxUSE_SYSTEM_OPTIONS)
WX_ARG_FEATURE(tarstream, [ --enable-tarstream use wxTar streams], wxUSE_TARSTREAM)
WX_ARG_FEATURE(textbuf, [ --enable-textbuf use wxTextBuffer class], wxUSE_TEXTBUFFER)
WX_ARG_FEATURE(textfile, [ --enable-textfile use wxTextFile class], wxUSE_TEXTFILE)
WX_ARG_FEATURE(xrc, [ --enable-xrc use XRC resources sub-library], wxUSE_XRC)
WX_ARG_FEATURE(aui, [ --enable-aui use AUI docking library], wxUSE_AUI)
WX_ARG_FEATURE(propgrid, [ --enable-propgrid use wxPropertyGrid library], wxUSE_PROPGRID)
+WX_ARG_FEATURE(ribbon, [ --enable-ribbon use wxRibbon library], wxUSE_RIBBON)
WX_ARG_FEATURE(stc, [ --enable-stc use wxStyledTextCtrl library], wxUSE_STC)
WX_ARG_FEATURE(constraints, [ --enable-constraints use layout-constraints system], wxUSE_CONSTRAINTS)
WX_ARG_FEATURE(loggui, [ --enable-loggui use standard GUI logger], wxUSE_LOGGUI)
WX_ARG_FEATURE(gstreamer8, [ --enable-gstreamer8 force GStreamer 0.8 instead of 0.10 with the wxMediaCtrl class on unix], wxUSE_GSTREAMER8)
WX_ARG_FEATURE(webkit, [ --enable-webkit use wxWebKitCtrl (Mac)], wxUSE_WEBKIT)
WX_ARG_FEATURE(richtext, [ --enable-richtext use wxRichTextCtrl], wxUSE_RICHTEXT)
-WX_ARG_FEATURE(graphics_ctx,[ --enable-graphics_ctx use graphics context 2D drawing API], wxUSE_GRAPHICS_CONTEXT)
WX_ARG_FEATURE(postscript, [ --enable-postscript use wxPostscriptDC device context (default for gtk+)], wxUSE_POSTSCRIPT)
WX_ARG_FEATURE(printarch, [ --enable-printarch use printing architecture], wxUSE_PRINTING_ARCHITECTURE)
WX_ARG_FEATURE(svg, [ --enable-svg use wxSVGFileDC device context], wxUSE_SVG)
+dnl wxDC is implemented in terms of wxGraphicsContext in wxOSX so the latter
+dnl can't be disabled, don't even provide an option to do it
+if test "$wxUSE_MAC" != 1; then
+WX_ARG_FEATURE(graphics_ctx,[ --enable-graphics_ctx use graphics context 2D drawing API], wxUSE_GRAPHICS_CONTEXT)
+fi
+
dnl ---------------------------------------------------------------------------
dnl IPC &c
dnl ---------------------------------------------------------------------------
DEFAULT_wxUSE_CONTROLS=none
WX_ARG_DISABLE(controls, [ --disable-controls disable compilation of all standard controls], wxUSE_CONTROLS)
-dnl even with --enable-controls, some may be disabled by giving
-dnl --disable-<control> later on the command line - but by default all will be
-dnl used (and vice versa)
-if test "$wxUSE_CONTROLS" = "yes"; then
- DEFAULT_wxUSE_ACCEL=yes
- DEFAULT_wxUSE_ANIMATIONCTRL=yes
- DEFAULT_wxUSE_BMPBUTTON=yes
- DEFAULT_wxUSE_BUTTON=yes
- DEFAULT_wxUSE_CALCTRL=yes
- DEFAULT_wxUSE_CARET=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_CHECKBOX=yes
- DEFAULT_wxUSE_CHECKLISTBOX=yes
- DEFAULT_wxUSE_CHOICE=yes
- DEFAULT_wxUSE_CHOICEBOOK=yes
- DEFAULT_wxUSE_COLLPANE=yes
- DEFAULT_wxUSE_COLOURPICKERCTRL=yes
- DEFAULT_wxUSE_COMBOBOX=yes
- DEFAULT_wxUSE_DATEPICKCTRL=yes
- DEFAULT_wxUSE_DISPLAY=yes
- DEFAULT_wxUSE_DETECT_SM=yes
- DEFAULT_wxUSE_DIRPICKERCTRL=yes
- DEFAULT_wxUSE_FILECTRL=yes
- DEFAULT_wxUSE_FILEPICKERCTRL=yes
- DEFAULT_wxUSE_FONTPICKERCTRL=yes
- DEFAULT_wxUSE_GAUGE=yes
- DEFAULT_wxUSE_GRID=yes
- DEFAULT_wxUSE_HYPERLINKCTRL=yes
- DEFAULT_wxUSE_DATAVIEWCTRL=yes
- DEFAULT_wxUSE_IMAGLIST=yes
- DEFAULT_wxUSE_LISTBOOK=yes
- DEFAULT_wxUSE_LISTBOX=yes
- DEFAULT_wxUSE_LISTCTRL=yes
- DEFAULT_wxUSE_NOTEBOOK=yes
- DEFAULT_wxUSE_RADIOBOX=yes
- DEFAULT_wxUSE_RADIOBTN=yes
- DEFAULT_wxUSE_SASH=yes
- DEFAULT_wxUSE_SCROLLBAR=yes
- DEFAULT_wxUSE_SEARCHCTRL=yes
- DEFAULT_wxUSE_SLIDER=yes
- DEFAULT_wxUSE_SPINBTN=yes
- DEFAULT_wxUSE_SPINCTRL=yes
- DEFAULT_wxUSE_SPLITTER=yes
- DEFAULT_wxUSE_STATBMP=yes
- DEFAULT_wxUSE_STATBOX=yes
- DEFAULT_wxUSE_STATLINE=yes
- DEFAULT_wxUSE_STATUSBAR=yes
- DEFAULT_wxUSE_TAB_DIALOG=yes
- DEFAULT_wxUSE_TOGGLEBTN=yes
- DEFAULT_wxUSE_TOOLBAR=yes
- DEFAULT_wxUSE_TOOLBAR_NATIVE=yes
- DEFAULT_wxUSE_TOOLTIPS=yes
- DEFAULT_wxUSE_TREEBOOK=yes
- DEFAULT_wxUSE_TOOLBOOK=yes
- DEFAULT_wxUSE_TREECTRL=yes
- DEFAULT_wxUSE_POPUPWIN=yes
- DEFAULT_wxUSE_TIPWINDOW=yes
-elif test "$wxUSE_CONTROLS" = "no"; then
- DEFAULT_wxUSE_ACCEL=no
- DEFAULT_wxUSE_ANIMATIONCTRL=no
- DEFAULT_wxUSE_BMPBUTTON=no
- DEFAULT_wxUSE_BUTTON=no
- DEFAULT_wxUSE_CALCTRL=no
- DEFAULT_wxUSE_CARET=no
- DEFAULT_wxUSE_COLLPANE=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_CHECKBOX=no
- DEFAULT_wxUSE_CHECKLISTBOX=no
- DEFAULT_wxUSE_CHOICE=no
- DEFAULT_wxUSE_CHOICEBOOK=no
- DEFAULT_wxUSE_COLOURPICKERCTRL=no
- DEFAULT_wxUSE_COMBOBOX=no
- DEFAULT_wxUSE_DATEPICKCTRL=no
- DEFAULT_wxUSE_DISPLAY=no
- DEFAULT_wxUSE_DETECT_SM=no
- DEFAULT_wxUSE_DIRPICKERCTRL=no
- DEFAULT_wxUSE_FILECTRL=no
- DEFAULT_wxUSE_FILEPICKERCTRL=no
- DEFAULT_wxUSE_FONTPICKERCTRL=no
- DEFAULT_wxUSE_GAUGE=no
- DEFAULT_wxUSE_GRID=no
- DEFAULT_wxUSE_HYPERLINKCTRL=no
- DEFAULT_wxUSE_DATAVIEWCTRL=no
- DEFAULT_wxUSE_IMAGLIST=no
- DEFAULT_wxUSE_LISTBOOK=no
- DEFAULT_wxUSE_LISTBOX=no
- DEFAULT_wxUSE_LISTCTRL=no
- DEFAULT_wxUSE_NOTEBOOK=no
- DEFAULT_wxUSE_RADIOBOX=no
- DEFAULT_wxUSE_RADIOBTN=no
- DEFAULT_wxUSE_SASH=no
- DEFAULT_wxUSE_SCROLLBAR=no
- DEFAULT_wxUSE_SEARCHCTRL=no
- DEFAULT_wxUSE_SLIDER=no
- DEFAULT_wxUSE_SPINBTN=no
- DEFAULT_wxUSE_SPINCTRL=no
- DEFAULT_wxUSE_SPLITTER=no
- DEFAULT_wxUSE_STATBMP=no
- DEFAULT_wxUSE_STATBOX=no
- DEFAULT_wxUSE_STATLINE=no
- DEFAULT_wxUSE_STATUSBAR=no
- DEFAULT_wxUSE_TAB_DIALOG=no
- DEFAULT_wxUSE_TOGGLEBTN=no
- DEFAULT_wxUSE_TOOLBAR=no
- DEFAULT_wxUSE_TOOLBAR_NATIVE=no
- DEFAULT_wxUSE_TOOLTIPS=no
- DEFAULT_wxUSE_TREEBOOK=no
- DEFAULT_wxUSE_TOOLBOOK=no
- DEFAULT_wxUSE_TREECTRL=no
- DEFAULT_wxUSE_POPUPWIN=no
- DEFAULT_wxUSE_TIPWINDOW=no
+dnl even with --disable-controls, some may be enabled by an explicit
+dnl --enable-<control> later on the command line -- but by default all will be
+dnl disabled
+if test "$wxUSE_CONTROLS" = "no"; then
+ DEFAULT_wxUSE_ACCEL=no
+ DEFAULT_wxUSE_ANIMATIONCTRL=no
+ DEFAULT_wxUSE_BMPBUTTON=no
+ DEFAULT_wxUSE_BUTTON=no
+ DEFAULT_wxUSE_CALCTRL=no
+ DEFAULT_wxUSE_CARET=no
+ DEFAULT_wxUSE_CHECKBOX=no
+ DEFAULT_wxUSE_CHECKLISTBOX=no
+ DEFAULT_wxUSE_CHOICE=no
+ DEFAULT_wxUSE_CHOICEBOOK=no
+ DEFAULT_wxUSE_COLLPANE=no
+ DEFAULT_wxUSE_COLOURPICKERCTRL=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_COMBOBOX=no
+ DEFAULT_wxUSE_DATAVIEWCTRL=no
+ DEFAULT_wxUSE_DATEPICKCTRL=no
+ DEFAULT_wxUSE_DETECT_SM=no
+ DEFAULT_wxUSE_DIRPICKERCTRL=no
+ DEFAULT_wxUSE_DISPLAY=no
+ DEFAULT_wxUSE_FILECTRL=no
+ DEFAULT_wxUSE_FILEPICKERCTRL=no
+ DEFAULT_wxUSE_FONTPICKERCTRL=no
+ DEFAULT_wxUSE_GAUGE=no
+ DEFAULT_wxUSE_GRID=no
+ DEFAULT_wxUSE_HEADERCTRL=no
+ DEFAULT_wxUSE_HYPERLINKCTRL=no
+ DEFAULT_wxUSE_IMAGLIST=no
+ DEFAULT_wxUSE_LISTBOOK=no
+ DEFAULT_wxUSE_LISTBOX=no
+ DEFAULT_wxUSE_LISTCTRL=no
+ DEFAULT_wxUSE_NOTEBOOK=no
+ DEFAULT_wxUSE_POPUPWIN=no
+ DEFAULT_wxUSE_RADIOBOX=no
+ DEFAULT_wxUSE_RADIOBTN=no
+ DEFAULT_wxUSE_REARRANGECTRL=no
+ DEFAULT_wxUSE_SASH=no
+ DEFAULT_wxUSE_SCROLLBAR=no
+ DEFAULT_wxUSE_SEARCHCTRL=no
+ DEFAULT_wxUSE_SLIDER=no
+ DEFAULT_wxUSE_SPINBTN=no
+ DEFAULT_wxUSE_SPINCTRL=no
+ DEFAULT_wxUSE_SPLITTER=no
+ DEFAULT_wxUSE_STATBMP=no
+ DEFAULT_wxUSE_STATBOX=no
+ DEFAULT_wxUSE_STATLINE=no
+ DEFAULT_wxUSE_STATUSBAR=no
+ DEFAULT_wxUSE_TIPWINDOW=no
+ DEFAULT_wxUSE_TOGGLEBTN=no
+ DEFAULT_wxUSE_TOOLBAR=no
+ DEFAULT_wxUSE_TOOLBAR_NATIVE=no
+ DEFAULT_wxUSE_TOOLBOOK=no
+ DEFAULT_wxUSE_TOOLTIPS=no
+ DEFAULT_wxUSE_TREEBOOK=no
+ DEFAULT_wxUSE_TREECTRL=no
fi
+dnl please keep the settings below in alphabetical order
WX_ARG_FEATURE(accel, [ --enable-accel use accelerators], wxUSE_ACCEL)
WX_ARG_FEATURE(animatectrl, [ --enable-animatectrl use wxAnimationCtrl class], wxUSE_ANIMATIONCTRL)
-WX_ARG_FEATURE(button, [ --enable-button use wxButton class], wxUSE_BUTTON)
WX_ARG_FEATURE(bmpbutton, [ --enable-bmpbutton use wxBitmapButton class], wxUSE_BMPBUTTON)
WX_ARG_FEATURE(bmpcombobox, [ --enable-bmpcombobox use wxBitmapComboBox class], wxUSE_BITMAPCOMBOBOX)
+WX_ARG_FEATURE(button, [ --enable-button use wxButton class], wxUSE_BUTTON)
WX_ARG_FEATURE(calendar, [ --enable-calendar use wxCalendarCtrl class], wxUSE_CALCTRL)
WX_ARG_FEATURE(caret, [ --enable-caret use wxCaret class], wxUSE_CARET)
WX_ARG_FEATURE(checkbox, [ --enable-checkbox use wxCheckBox class], wxUSE_CHECKBOX)
WX_ARG_FEATURE(colourpicker,[ --enable-colourpicker use wxColourPickerCtrl class], wxUSE_COLOURPICKERCTRL)
WX_ARG_FEATURE(combobox, [ --enable-combobox use wxComboBox class], wxUSE_COMBOBOX)
WX_ARG_FEATURE(comboctrl, [ --enable-comboctrl use wxComboCtrl class], wxUSE_COMBOCTRL)
+WX_ARG_FEATURE(dataviewctrl,[ --enable-dataviewctrl use wxDataViewCtrl class], wxUSE_DATAVIEWCTRL)
WX_ARG_FEATURE(datepick, [ --enable-datepick use wxDatePickerCtrl class], wxUSE_DATEPICKCTRL)
+WX_ARG_FEATURE(detect_sm, [ --enable-detect_sm use code to detect X11 session manager], wxUSE_DETECT_SM)
WX_ARG_FEATURE(dirpicker, [ --enable-dirpicker use wxDirPickerCtrl class], wxUSE_DIRPICKERCTRL)
WX_ARG_FEATURE(display, [ --enable-display use wxDisplay class], wxUSE_DISPLAY)
-WX_ARG_FEATURE(detect_sm, [ --enable-detect_sm use code to detect X11 session manager], wxUSE_DETECT_SM)
WX_ARG_FEATURE(editablebox, [ --enable-editablebox use wxEditableListBox class], wxUSE_EDITABLELISTBOX)
-WX_ARG_FEATURE(filepicker, [ --enable-filepicker use wxFilePickerCtrl class], wxUSE_FILEPICKERCTRL)
WX_ARG_FEATURE(filectrl, [ --enable-filectrl use wxFileCtrl class], wxUSE_FILECTRL)
+WX_ARG_FEATURE(filepicker, [ --enable-filepicker use wxFilePickerCtrl class], wxUSE_FILEPICKERCTRL)
WX_ARG_FEATURE(fontpicker, [ --enable-fontpicker use wxFontPickerCtrl class], wxUSE_FONTPICKERCTRL)
WX_ARG_FEATURE(gauge, [ --enable-gauge use wxGauge class], wxUSE_GAUGE)
WX_ARG_FEATURE(grid, [ --enable-grid use wxGrid class], wxUSE_GRID)
-WX_ARG_FEATURE(dataviewctrl,[ --enable-dataviewctrl use wxDataViewCtrl class], wxUSE_DATAVIEWCTRL)
+WX_ARG_FEATURE(headerctrl, [ --enable-headerctrl use wxHeaderCtrl class], wxUSE_HEADERCTRL)
WX_ARG_FEATURE(hyperlink, [ --enable-hyperlink use wxHyperlinkCtrl class], wxUSE_HYPERLINKCTRL)
WX_ARG_FEATURE(imaglist, [ --enable-imaglist use wxImageList class], wxUSE_IMAGLIST)
+WX_ARG_FEATURE(infobar, [ --enable-infobar use wxInfoBar class], wxUSE_INFOBAR)
WX_ARG_FEATURE(listbook, [ --enable-listbook use wxListbook class], wxUSE_LISTBOOK)
WX_ARG_FEATURE(listbox, [ --enable-listbox use wxListBox class], wxUSE_LISTBOX)
WX_ARG_FEATURE(listctrl, [ --enable-listctrl use wxListCtrl class], wxUSE_LISTCTRL)
WX_ARG_FEATURE(notebook, [ --enable-notebook use wxNotebook class], wxUSE_NOTEBOOK)
WX_ARG_FEATURE(notifmsg, [ --enable-notifmsg use wxNotificationMessage class], wxUSE_NOTIFICATION_MESSAGE)
WX_ARG_FEATURE(odcombobox, [ --enable-odcombobox use wxOwnerDrawnComboBox class], wxUSE_ODCOMBOBOX)
+WX_ARG_FEATURE(popupwin, [ --enable-popupwin use wxPopUpWindow class], wxUSE_POPUPWIN)
WX_ARG_FEATURE(radiobox, [ --enable-radiobox use wxRadioBox class], wxUSE_RADIOBOX)
WX_ARG_FEATURE(radiobtn, [ --enable-radiobtn use wxRadioButton class], wxUSE_RADIOBTN)
+WX_ARG_FEATURE(rearrangectrl,[ --enable-rearrangectrl use wxRearrangeList/Ctrl/Dialog], wxUSE_REARRANGECTRL)
WX_ARG_FEATURE(sash, [ --enable-sash use wxSashWindow class], wxUSE_SASH)
WX_ARG_FEATURE(scrollbar, [ --enable-scrollbar use wxScrollBar class and scrollable windows], wxUSE_SCROLLBAR)
WX_ARG_FEATURE(searchctrl, [ --enable-searchctrl use wxSearchCtrl class], wxUSE_SEARCHCTRL)
WX_ARG_FEATURE(statline, [ --enable-statline use wxStaticLine class], wxUSE_STATLINE)
WX_ARG_FEATURE(stattext, [ --enable-stattext use wxStaticText class], wxUSE_STATTEXT)
WX_ARG_FEATURE(statusbar, [ --enable-statusbar use wxStatusBar class], wxUSE_STATUSBAR)
-WX_ARG_FEATURE(tabdialog, [ --enable-tabdialog use wxTabControl class], wxUSE_TAB_DIALOG)
WX_ARG_FEATURE(taskbaricon, [ --enable-taskbaricon use wxTaskBarIcon class], wxUSE_TASKBARICON)
+WX_ARG_FEATURE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
WX_ARG_FEATURE(textctrl, [ --enable-textctrl use wxTextCtrl class], wxUSE_TEXTCTRL)
+WX_ARG_FEATURE(tipwindow, [ --enable-tipwindow use wxTipWindow class], wxUSE_TIPWINDOW)
WX_ARG_FEATURE(togglebtn, [ --enable-togglebtn use wxToggleButton class], wxUSE_TOGGLEBTN)
WX_ARG_FEATURE(toolbar, [ --enable-toolbar use wxToolBar class], wxUSE_TOOLBAR)
-WX_ARG_FEATURE(tbarnative, [ --enable-tbarnative use native wxToolBar class], wxUSE_TOOLBAR_NATIVE)
-WX_ARG_FEATURE(treebook, [ --enable-treebook use wxTreebook class], wxUSE_TREEBOOK)
WX_ARG_FEATURE(toolbook, [ --enable-toolbook use wxToolbook class], wxUSE_TOOLBOOK)
+WX_ARG_FEATURE(treebook, [ --enable-treebook use wxTreebook class], wxUSE_TREEBOOK)
WX_ARG_FEATURE(treectrl, [ --enable-treectrl use wxTreeCtrl class], wxUSE_TREECTRL)
-WX_ARG_FEATURE(tipwindow, [ --enable-tipwindow use wxTipWindow class], wxUSE_TIPWINDOW)
-WX_ARG_FEATURE(popupwin, [ --enable-popupwin use wxPopUpWindow class], wxUSE_POPUPWIN)
dnl ---------------------------------------------------------------------------
dnl common dialogs
WX_ARG_FEATURE(metafile, [ --enable-metafiles use wxMetaFile (Win32 only)], wxUSE_METAFILE)
WX_ARG_FEATURE(dragimage, [ --enable-dragimage use wxDragImage], wxUSE_DRAGIMAGE)
WX_ARG_FEATURE(accessibility,[ --enable-accessibility enable accessibility support], wxUSE_ACCESSIBILITY)
+WX_ARG_FEATURE(uiactionsim, [ --enable-uiactionsim use wxUIActionSimulator (experimental)], wxUSE_UIACTIONSIMULATOR)
dnl ---------------------------------------------------------------------------
dnl support for image formats that do not rely on external library
dnl
dnl this magic incantation is needed to prevent AC_PROG_CC from setting the
dnl default CFLAGS (something like "-g -O2") -- we don't need this as we add
-dnl -g and -O flags ourselves below
+dnl (if not already present in C*FLAGS) the -g and -O flags ourselves below
CFLAGS=${CFLAGS:=}
AC_BAKEFILE_PROG_CC
fi
fi
+dnl ---------------------------------------------------------------------------
+dnl Mac-specific SDK/architectures checks
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_MAC" = 1; then
+
retest_macosx_linking=no
dnl Support the old --enable-universal_binary in case anyone was using it.
-#if test "$wxUSE_MAC" = 1; then
if test "x$wxUSE_UNIVERSAL_BINARY" != xno ; then
dnl --enable-universal_binary uses a default SDK (currently 10.4u)
dnl --enable-universal_binary=SDK names a path to an SDK
AC_MSG_WARN([Disabling precompiled headers due to universal binary build.])
bk_use_pch=no
fi
-#fi
dnl Set up the Mac OS X SDK. We do this early so configure tests will occur
dnl with the SDK in place.
wxUSE_MACOSX_VERSION_MIN=
fi
elif test "x$wxUSE_MACOSX_VERSION_MIN" = "x"; then
- if test "$wxUSE_MAC" = 1; then
- # otherwise configure stops on leopard for universal_binary
- wxUSE_MACOSX_VERSION_MIN=10.4
+ AC_CHECK_PROGS(OSX_SW_VERS, sw_vers)
+ if test "$OSX_SW_VERS" != ""; then
+ OSX_VERSION=`sw_vers -productVersion | grep 10.[[0-9]]`
+ else
+ dnl can't determine it (happens e.g. when cross-compiling) so use a
+ dnl conservative default
+ AC_MSG_WARN([Assuming OS X 10.4, use --with-macosx-version-min to override.])
+ OSX_VERSION="10.4"
+ fi
+
+ case "$OSX_VERSION" in
+ 10.4* )
+ wxUSE_MACOSX_VERSION_MIN=10.4
+ ;;
+
+ * )
+ if test "$wxUSE_OSX_CARBON" = 1; then
+ # otherwise configure stops on leopard for universal_binary
+ wxUSE_MACOSX_VERSION_MIN=10.4
+ else
+ # for Cocoa, use 10.5 to be able to compile it in 64 bits too
+ wxUSE_MACOSX_VERSION_MIN=10.5
+ fi
+ ;;
+ esac
+fi
+
+NEEDS_GCC40="no"
+if test "x$wxUSE_MACOSX_VERSION_MIN" == "x10.4"; then
+ NEEDS_GCC40="yes"
+fi
+
+if test "$wxUSE_OSX_CARBON" = 1; then
+ NEEDS_GCC40="yes"
+fi
+
+if test "x$NEEDS_GCC40" == "xyes"; then
+ # gcc 4.2 cannot compile 10.4 compatible code, so if the user is using it
+ # and wants 10.4 compatible code, then 'downgrade' to 4.0
+ # This is also the simplest way to get 32-bit binaries on Snow Leopard.
+ if test "x$CC" = "xgcc"; then
+ CCVERSION=`$CC --version | grep 4.[[2-9]].`
+ if test "x$CCVERSION" != "x"; then
+ echo "$as_me:$LINENO: WARNING: gcc >= 4.2 cannot compile 10.4 compatible code. Using gcc 4.0 instead."
+ CC="/usr/bin/gcc-4.0"
+ fi
+ fi
+
+ if test "x$CXX" = "xg++"; then
+ CCVERSION=`$CXX --version | grep 4.[[2-9]].`
+ if test "x$CCVERSION" != "x"; then
+ CXX="/usr/bin/g++-4.0"
+ fi
fi
fi
AC_LANG_POP()
fi
+fi dnl wxUSE_MAC
case "${host}" in
CFLAGS="-erroff=E_NO_EXPLICIT_TYPE_GIVEN $CFLAGS"
fi
-dnl SGI mipsPro compiler gives this warning for "conversion from pointer to
-dnl same-sized integral type" even when there is an explicit cast and as there
-dnl is no way to turn it off and there are hundreds of these warnings in wx
-dnl sources, just turn it off for now
+dnl SGI mipsPro compiler version 7.4.4 and later (and maybe some earlier
+dnl versions too but it's known that 7.4.2 doesn't give this warning but does
+dnl instead warn about "unknown warning number 3970" which explains that we
+dnl don't want to do this for it) gives this warning for "conversion from
+dnl pointer to same-sized integral type" even when there is an explicit cast
+dnl and as there is no way to turn it off and there are hundreds of these
+dnl warnings in wx sources, just turn it off for now
dnl
dnl a better long term solution would be to use #pragma set/reset woff in
dnl wxPtrToUInt() and use it instead of casts elsewhere
if test "x$SGICC" = "xyes"; then
- CFLAGS="-woff 3970 $CFLAGS"
+ AC_CACHE_CHECK([if cc version is 7.4.4 or greater],
+ wx_cv_prog_sgicc744,
+ [
+ AC_TRY_COMPILE([],
+ [
+ #if _SGI_COMPILER_VERSION >= 744
+ chock me: mipsPro is 7.4.4 or later
+ #endif
+ ],
+ wx_cv_prog_sgicc744=no,
+ wx_cv_prog_sgicc744=yes
+ )
+ ]
+ )
+
+ if test "x$wx_cv_prog_sgicc744" = "xyes"; then
+ CFLAGS="-woff 3970 $CFLAGS"
+ fi
fi
if test "x$SGICXX" = "xyes"; then
- CXXFLAGS="-woff 3970 $CXXFLAGS"
+ AC_CACHE_CHECK([if CC version is 7.4.4 or greater],
+ wx_cv_prog_sgicxx744,
+ [
+ AC_LANG_PUSH(C++)
+ AC_TRY_COMPILE([],
+ [
+ #if _SGI_COMPILER_VERSION >= 744
+ chock me: mipsPro is 7.4.4 or later
+ #endif
+ ],
+ wx_cv_prog_sgicxx744=no,
+ wx_cv_prog_sgicxx744=yes
+ )
+ AC_LANG_POP()
+ ]
+ )
+
+ if test "x$wx_cv_prog_sgicxx744" = "xyes"; then
+ CXXFLAGS="-woff 3970 $CXXFLAGS"
+ fi
fi
dnl HP-UX c89/aCC compiler warnings
/usr/local/include \
/usr/local/X11/include \
/usr/local/include/X11 \
+ /usr/local/X11R7/include \
/usr/local/X11R6/include \
+ /usr/local/include/X11R7 \
/usr/local/include/X11R6 \
\
/usr/Motif-2.1/include \
\
/usr/include/Xm \
\
+ /usr/X11R7/include \
/usr/X11R6/include \
/usr/X11R6.4/include \
\
+ /usr/include/X11R7 \
/usr/include/X11R6 \
\
/usr/X11/include \
AC_CHECK_HEADER(png.h,,, [ ])
if test "$ac_cv_header_png_h" = "yes"; then
- AC_CHECK_LIB(png, png_check_sig, PNG_LINK=" -lpng -lz", , [-lz -lm])
+ AC_CHECK_LIB(png, png_sig_cmp, PNG_LINK=" -lpng -lz", , [-lz -lm])
fi
if test "x$PNG_LINK" = "x" ; then
dnl --- FIXME: This is still a somewhat random list of libs,
dnl --- some of them should probably be included conditionally.
case "${host}" in
- x86_64-*-mingw32* )
+ x86_64-*-mingw32* )
dnl --- For mingw-w64 lctl3d32's name has changed
LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lwctl3d32 -ladvapi32 -lwsock32 -lgdi32"
+
+ dnl we need to define this to embed the manifest for correct
+ dnl platform from wx/msw/wx.rc (this is not needed for x86 which is
+ dnl the default in wx/msw/rcdefs.h)
+ WINDRES_CPU_DEFINE="--define WX_CPU_AMD64"
;;
* )
LIBS="$LIBS -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32"
WXGTK2=
WXGPE=
- if test "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
if test "$wxUSE_PRINTING_ARCHITECTURE" = "yes"; then
AC_MSG_WARN([Printing not supported under wxCocoa yet, disabled])
wxUSE_PRINTING_ARCHITECTURE=no
CFLAGS="$wx_cv_cflags_gtk $CFLAGS"
LIBS="$LIBS $wx_cv_libs_gtk"
- dnl test if we have at least GTK+ 2.10:
- AC_MSG_CHECKING([if GTK+ is version >= 2.10])
+ dnl test if we have at least GTK+ 2.18:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.18])
AC_TRY_COMPILE([
#include <gtk/gtk.h>
],
[
- #if !GTK_CHECK_VERSION(2,10,0)
- Not GTK+ 2.10
+ #if !GTK_CHECK_VERSION(2,18,0)
+ Not GTK+ 2.18
#endif
],
[
+ AC_DEFINE(__WXGTK218__)
AC_DEFINE(__WXGTK210__)
AC_DEFINE(__WXGTK26__)
AC_MSG_RESULT([yes])
- ac_wxgtk210=1
+ ac_wxgtk218=1
],
[
AC_MSG_RESULT([no])
- ac_wxgtk210=0
+ ac_wxgtk218=0
])
- if test "$ac_wxgtk210" = 0; then
- dnl test if we have at least GTK+ 2.6:
- AC_MSG_CHECKING([if GTK+ is version >= 2.6])
+ if test "$ac_wxgtk218" = 0; then
+ dnl test if we have at least GTK+ 2.10:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.10])
AC_TRY_COMPILE([
#include <gtk/gtk.h>
- ],
- [
- #if !GTK_CHECK_VERSION(2,6,0)
- Not GTK+ 2.6
+ ],
+ [
+ #if !GTK_CHECK_VERSION(2,10,0)
+ Not GTK+ 2.10
#endif
- ],
- [
+ ],
+ [
+ AC_DEFINE(__WXGTK210__)
AC_DEFINE(__WXGTK26__)
AC_MSG_RESULT([yes])
- ac_wxgtk26=1
- ],
- [
+ ac_wxgtk210=1
+ ],
+ [
AC_MSG_RESULT([no])
- ac_wxgtk26=0
- ])
+ ac_wxgtk210=0
+ ])
+
+ if test "$ac_wxgtk210" = 0; then
+ dnl test if we have at least GTK+ 2.6:
+ AC_MSG_CHECKING([if GTK+ is version >= 2.6])
+ AC_TRY_COMPILE([
+ #include <gtk/gtk.h>
+ ],
+ [
+ #if !GTK_CHECK_VERSION(2,6,0)
+ Not GTK+ 2.6
+ #endif
+ ],
+ [
+ AC_DEFINE(__WXGTK26__)
+ AC_MSG_RESULT([yes])
+ ac_wxgtk26=1
+ ],
+ [
+ AC_MSG_RESULT([no])
+ ac_wxgtk26=0
+ ])
+ fi
fi
CFLAGS="$save_CFLAGS"
TOOLKIT_INCLUDE="$wx_cv_cflags_gtk"
GUI_TK_LIBRARY="$wx_cv_libs_gtk $GUI_TK_LIBRARY"
+ dnl disable GTK runtime type checks
+ TOOLKIT_INCLUDE="$TOOLKIT_INCLUDE -DG_DISABLE_CAST_CHECKS"
+
AFMINSTALL=afminstall
TOOLKIT=GTK
GUIDIST=GTK_DIST
fi
if test "x$wxUSE_UNIX" = "xyes"; then
- CPPFLAGS="$CPPFLAGS_PASCAL -I\${top_srcdir}/src/mac/carbon/morefilex -I/Developer/Headers/FlatCarbon $CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS_PASCAL -I/Developer/Headers/FlatCarbon $CPPFLAGS"
else
dnl platform.h needs TARGET_CARBON before setup.h
- CPPFLAGS="$CPPFLAGS_PASCAL -I\${top_srcdir}/src/mac/carbon/morefilex -DTARGET_CARBON $CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS_PASCAL -DTARGET_CARBON $CPPFLAGS"
fi
TOOLKIT=OSX_CARBON
dnl wxMac version of wxBase and wxCocoa or wxBase-only built on Darwin
dnl are different, so they need different names:
WXBASEPORT="_carbon"
+
+ dnl in addition to defining __WXOSX_CARBON__ for this toolkit we want
+ dnl to also define these extra symbols to make it possible to test for
+ dnl any Mac port (__WXMAC__ is for backwards compatibility, __WXOSX__
+ dnl is a new name)
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXMAC__ -D__WXOSX__"
fi
if test "$wxUSE_OSX_COCOA" = 1; then
TOOLKIT=OSX_COCOA
GUIDIST=OSX_COCOA_DIST
+
+ dnl see the comment above in wxUSE_OSX_CARBON branch
+ TOOLCHAIN_DEFS="${TOOLCHAIN_DEFS} -D__WXMAC__ -D__WXOSX__"
+ fi
+
+ if test "$wxUSE_OSX_IPHONE" = 1; then
+ TOOLKIT=OSX_IPHONE
fi
- if test "$wxUSE_COCOA" = 1; then
+ if test "$wxUSE_OLD_COCOA" = 1; then
TOOLKIT=COCOA
GUIDIST=COCOA_DIST
fi
dnl ---------------------------------------------------------------------------
-dnl wxDisplay Sanity checks
+dnl wxDisplay checks
dnl ---------------------------------------------------------------------------
+USE_XINERAMA=0
if test "$wxUSE_DISPLAY" = "yes"; then
-dnl ---------------------------------------------------------------------------
-dnl Xinerama (for unix ) - Brian Victor
-dnl ---------------------------------------------------------------------------
- if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1; then
+ dnl Xinerama is used for wxGTK1/wxX11/wxMotif only
+ if test "$wxUSE_MOTIF" = 1 -o "$wxUSE_X11" = 1 -o "$wxUSE_GTK1" = 1; then
AC_MSG_CHECKING([for Xinerama])
WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xinerama)
if test "$ac_find_libraries" != "" ; then
if test "$ac_path_to_link" != " -L/usr/lib" ; then
LDFLAGS="$LDFLAGS $ac_path_to_link"
fi
+ USE_XINERAMA=1
GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXinerama"
AC_MSG_RESULT([yes])
-
- AC_MSG_CHECKING([for Xxf86vm extension])
- WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xxf86vm)
- if test "$ac_find_libraries" != "" ; then
- AC_MSG_RESULT([yes])
- AC_CHECK_HEADERS([X11/extensions/xf86vmode.h],
- [
- GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXxf86vm"
- ],
- [],
- [
- #if HAVE_X11_XLIB_H
- #include <X11/Xlib.h>
- #endif
- ])
- else
- AC_MSG_RESULT([no])
- fi
-
else
AC_MSG_RESULT([no])
AC_MSG_WARN([Xinerama not found; disabling wxDisplay])
wxUSE_DISPLAY="no"
fi
elif test "$wxUSE_MSW" = 1; then
-dnl ---------------------------------------------------------------------------
-dnl DirectDraw for MSW - optionally used by WxDisplay.
-dnl ---------------------------------------------------------------------------
+ dnl DirectDraw for MSW - optionally used by WxDisplay.
AC_CHECK_HEADER([ddraw.h], [], [], [#include <windows.h>])
fi
fi
+if test "$wxUSE_DISPLAY" = "yes"; then
+ dnl wxGTK2 needs Xxf86vm as well as Xinerama-using ports from above
+ if test "$USE_XINERAMA" = 1 -o "$wxUSE_GTK" = 1; then
+ AC_MSG_CHECKING([for Xxf86vm extension])
+ WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],Xxf86vm)
+ if test "$ac_find_libraries" != "" ; then
+ AC_MSG_RESULT([yes])
+ AC_CHECK_HEADERS([X11/extensions/xf86vmode.h],
+ [
+ GUI_TK_LIBRARY="$GUI_TK_LIBRARY -lXxf86vm"
+ ],
+ [],
+ [
+ #if HAVE_X11_XLIB_H
+ #include <X11/Xlib.h>
+ #endif
+ ])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl X11 session management
dnl ---------------------------------------------------------------------------
if test "$wxUSE_DETECT_SM" = "yes"; then
- if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1; then
+ if test "$wxUSE_UNIX" = "yes" -a "$wxUSE_MAC" != 1 -a "$wxUSE_OLD_COCOA" != 1; then
AC_MSG_CHECKING([for -lSM - X11 session management])
WX_PATH_FIND_LIBRARIES([$SEARCH_LIB],SM)
if test "$ac_find_libraries" != "" ; then
USE_OPENGL=0
if test "$wxUSE_OPENGL" = "yes" -o "$wxUSE_OPENGL" = "auto"; then
- if test "$wxUSE_MGL" = 1 -o "$wxUSE_DFB" = 1; then
- AC_MSG_WARN([wxGLCanvas not implemented for this port, library will be compiled without it.])
- wxUSE_OPENGL="no"
- elif test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_COCOA" = 1; then
+
+ dnl look in glcanvas.h for the list of platforms supported by wxGlCanvas:
+
+ if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
OPENGL_LIBS="-framework OpenGL -framework AGL"
elif test "$wxUSE_MSW" = 1; then
OPENGL_LIBS="-lopengl32 -lglu32"
- else
+ elif test "$wxUSE_MOTIF" = 1 -o "$wxUSE_X11" = 1 -o "$wxUSE_GTK2" = 1 -o "$wxUSE_GTK" = 1; then
+
dnl adjust CPPFLAGS to include GL/gl.h location if necessary
dnl (/opt/graphics/OpenGL is for HP-UX systems, bug 925307)
AC_MSG_CHECKING([for OpenGL headers])
wxUSE_OPENGL=no
USE_OPENGL=0
fi
- else
- dnl libraries are available... change 'auto' in 'yes'
- wxUSE_OPENGL=yes
fi
+ else
+ AC_MSG_WARN([wxGLCanvas not implemented for this port, library will be compiled without it.])
+ wxUSE_OPENGL="no"
+ fi
+
+ if test "$wxUSE_OPENGL" = "auto"; then
+ dnl if the OpenGL libraries were unavailable, this would have been
+ dnl changed to "no" above, if it wasn't, change it to "yes" as we've
+ dnl verified that we can indeed use OpenGL
+ wxUSE_OPENGL=yes
fi
if test "$wxUSE_OPENGL" = "yes"; then
;;
*-*-darwin* )
- install_name_tool=`which install_name_tool`
+ install_name_tool=`which ${HOST_PREFIX}install_name_tool`
if test "$install_name_tool" -a -x "$install_name_tool"; then
- SAMPLES_RPATH_POSTLINK="\$(wx_top_builddir)/change-install-names \$(LIBDIRNAME) \$(prefix) \$@"
+ DYLIB_RPATH_POSTLINK="${HOST_PREFIX}install_name_tool -id \$@ \$@"
cat <<EOF >change-install-names
#!/bin/sh
libnames=\`cd \${1} ; ls -1 | grep '\.[[0-9]][[0-9]]*\.dylib\$'\`
-inst_cmd="install_name_tool "
for i in \${libnames} ; do
- inst_cmd="\${inst_cmd} -change \${2}/lib/\${i} \${1}/\${i}"
+ ${HOST_PREFIX}install_name_tool -id \${1}/\${i} \${1}/\${i}
+ for dep in \${libnames} ; do
+ ${HOST_PREFIX}install_name_tool -change \${2}/\${dep} \${1}/\${dep} \${1}/\${i}
+ done
done
-\${inst_cmd} \${3}
EOF
chmod +x change-install-names
+ DYLIB_RPATH_INSTALL="\$(wx_top_builddir)/change-install-names \${libdir} \$(wx_top_builddir)/lib"
fi
+
+ dnl the HEADER_PAD_OPTION is required by some wx samples to avoid the error:
+ dnl "install_name_tool: changing install names can't be redone for: the_exe_name
+ dnl (for architecture ppc) because larger updated load commands do not fit
+ dnl (the program must be relinked)"
+ HEADER_PAD_OPTION="-headerpad_max_install_names"
;;
*-*-cygwin* | *-*-mingw32* )
if test $wxUSE_RPATH = "no"; then
SAMPLES_RPATH_FLAG=''
- SAMPLES_RPATH_POSTLINK=''
+ DYLIB_PATH_POSTLINK=''
WXCONFIG_RPATH=''
fi
UNICODE=1
fi
-lib_debug_suffix=
-WX_DEBUGTYPE="release"
-DEBUG_FLAG=0
-if test "$wxUSE_DEBUG_FLAG" = "yes"; then
- lib_debug_suffix=d
- WX_DEBUGTYPE="debug"
- DEBUG_FLAG=1
-fi
-
WX_FLAVOUR=${WX_FLAVOUR:+-$WX_FLAVOUR}
WX_LIB_FLAVOUR=`echo $WX_FLAVOUR | tr '-' '_'`
DEBUG_INFO=1
fi
-WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr '[[a-z]]' '[[A-Z]]'`
+WX_VERSION_TAG=`echo WX${lib_unicode_suffix}${WX_LIB_FLAVOUR}_${WX_RELEASE} | tr '[[a-z]]' '[[A-Z]]'`
-TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}"
+TOOLCHAIN_NAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
-TOOLCHAIN_FULLNAME="${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}-${WX_CHARTYPE}-${WX_DEBUGTYPE}${config_linkage_component}-${WX_RELEASE}${WX_FLAVOUR}"
-
-if test "$cross_compiling" = "yes"; then
- HOST_SUFFIX="-$host_alias"
- TOOLCHAIN_NAME="$TOOLCHAIN_NAME$HOST_SUFFIX"
- TOOLCHAIN_FULLNAME="${host_alias}-$TOOLCHAIN_FULLNAME"
-fi
+TOOLCHAIN_FULLNAME="${HOST_PREFIX}${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}-${WX_CHARTYPE}${config_linkage_component}-${WX_RELEASE}${WX_FLAVOUR}"
dnl library link name
-dnl These just save us from exporting lib_{unicode,debug,flavour}_suffix.
+dnl These just save us from exporting lib_{unicode,flavour}_suffix.
dnl If we ever need to do that, we won't need to keep these.
-WX_LIBRARY_BASENAME_NOGUI="wx_base${WXBASEPORT}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+
+if test "$wxUSE_OSX_CARBON" = 1 -o "$wxUSE_OSX_COCOA" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
+ WX_LIBRARY_BASENAME_NOGUI="wx_base${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
+else
+ WX_LIBRARY_BASENAME_NOGUI="wx_base${WXBASEPORT}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
+fi
if test "${TOOLKIT_DIR}" = "os2"; then
- WX_LIBRARY_BASENAME_GUI="wx_pm${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+ WX_LIBRARY_BASENAME_GUI="wx_pm${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
else
- WX_LIBRARY_BASENAME_GUI="wx_${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${lib_debug_suffix}${WX_LIB_FLAVOUR}"
+ WX_LIBRARY_BASENAME_GUI="wx_${TOOLKIT_DIR}${TOOLKIT_VERSION}${WIDGET_SET}${lib_unicode_suffix}${WX_LIB_FLAVOUR}"
fi
-if test "$wxUSE_COCOA" = 1; then
+if test "$wxUSE_OLD_COCOA" = 1; then
AC_LANG_SAVE
AC_WX_LANG_OBJECTIVEC
dnl Recent AppKit/NSEvent.h include parts of IOKit which eventually
AC_DEFINE(HAVE_WCSLEN)
fi
- AC_CHECK_FUNCS([wcsdup])
+ AC_CHECK_FUNCS([wcsdup strnlen wcsnlen wcscasecmp wcsncasecmp])
dnl On HP-UX aCC need this define to find mbstrtowcs() &c
dnl Can't be used for g++ since the mbstate_t in wchar.h can conflict
fi
;;
+ *-*-qnx*)
+ dnl under QNX thread functions are in libc so we don't need any
+ dnl special options to link with them
+ THREAD_OPTS=""
+ ;;
+
*-*-*UnixWare*)
dnl flying by man pages here: Caldera online docs use this
if test "x$GCC" != "xyes"; then
;;
esac
- dnl simply linking with libpthread should make the test below work but
- dnl it's far from certain that the threaded programs compiled without
- dnl any special switches actually work, so try it after all the others
- THREAD_OPTS="$THREAD_OPTS pthread none"
+ case "${host}" in
+ *-*-qnx*)
+ dnl -lpthread works, i.e. AC_TRY_LINK() would pass, but results
+ dnl in warnings and is not needed under QNX so try without it
+ dnl first
+ THREAD_OPTS="none pthread"
+ ;;
+
+ *)
+ dnl simply linking with libpthread should make the test below
+ dnl work but it's far from certain that the threaded programs
+ dnl compiled without any special switches actually work, so try
+ dnl it after all the others
+ THREAD_OPTS="$THREAD_OPTS pthread none"
+ ;;
+ esac
dnl now test for all possibilities
THREADS_OK=no
else
dnl yes, these special compiler flags should be used with the
dnl linker as well
+ dnl
+ dnl NB: add them to LDFLAGS immediately because we need them to be
+ dnl used for the subsequent tests some of which can fail without
+ dnl MT support, hence the reason for the duplication below:
+ dnl adding them just to WXCONFIG_LDFLAGS and adding the entire
+ dnl contents of the latter to LDFLAGS in the end is not enough.
LDFLAGS="$THREADS_CFLAGS $LDFLAGS"
+ WXCONFIG_LDFLAGS="$THREADS_CFLAGS $WXCONFIG_LDFLAGS"
LIBS="$THREADS_LINK $LIBS"
AC_MSG_CHECKING([if more special flags are required for pthreads])
dnl search path should include -L/usr/lib/threads at the
dnl beginning of the path.
LDFLAGS="-L/usr/lib/threads $LDFLAGS"
+ WXCONFIG_LDFLAGS="-L/usr/lib/threads $WXCONFIG_LDFLAGS"
flag="-D_THREAD_SAFE"
;;
*-freebsd*)
fi
fi
- dnl test for compiler thread-specific variables support
- AC_CACHE_CHECK([for __thread keyword],
- wx_cv_cc___thread,
- [
- AC_TRY_COMPILE([#include <pthread.h>],
- [
- static __thread int n = 0;
- static __thread int *p = 0;
- ],
- wx_cv_cc___thread=yes,
- wx_cv_cc___thread=no
- )
- ]
- )
-
- if test "$wx_cv_cc___thread" = "yes"; then
- AX_GXX_VERSION
- if test -n "$ax_cv_gxx_version"; then
- dnl g++ supports __thread since at least version 3.3 but its support
- dnl seems to be broken until 4.1, see
- dnl http://thread.gmane.org/gmane.comp.lib.wxwidgets.devel/108388
- dnl
- dnl NB: we still need to test __thread support with
- dnl AC_TRY_COMPILE above even for g++ 4 as it doesn't
- dnl support it for all architectures (e.g. it doesn't
- dnl work under OS X)
- AC_MSG_CHECKING([whether __thread support in g++ is usable])
- case "$ax_cv_gxx_version" in
- 1.* | 2.* | 3.* )
- AC_MSG_RESULT([no, it's broken])
- wx_cv_cc___thread=no
- ;;
- *)
- AC_MSG_RESULT([yes, it works])
- ;;
- esac
+ if test "$wxUSE_COMPILER_TLS" = "auto"; then
+ if test "$USE_NETBSD" = 1; then
+ AC_MSG_WARN([Disabling TLS under NetBSD, please contact wx-dev if it works now])
+ wxUSE_COMPILER_TLS=no
+ else
+ wxUSE_COMPILER_TLS=yes
fi
fi
- if test "$wx_cv_cc___thread" = "yes"; then
- AC_DEFINE(HAVE___THREAD_KEYWORD)
- fi
+ if test "$wxUSE_COMPILER_TLS" = "yes"; then
+ dnl test for compiler thread-specific variables support
+ AC_CACHE_CHECK([for __thread keyword],
+ wx_cv_cc___thread,
+ [
+ AC_TRY_COMPILE([#include <pthread.h>],
+ [
+ static __thread int n = 0;
+ static __thread int *p = 0;
+ ],
+ wx_cv_cc___thread=yes,
+ wx_cv_cc___thread=no
+ )
+ ]
+ )
+
+ if test "$wx_cv_cc___thread" = "yes"; then
+ AX_GXX_VERSION
+ if test -n "$ax_cv_gxx_version"; then
+ dnl g++ supports __thread since at least version 3.3 but its support
+ dnl seems to be broken until 4.1, see
+ dnl http://thread.gmane.org/gmane.comp.lib.wxwidgets.devel/108388
+ dnl
+ dnl NB: we still need to test __thread support with
+ dnl AC_TRY_COMPILE above even for g++ 4 as it doesn't
+ dnl support it for all architectures (e.g. it doesn't
+ dnl work under OS X)
+ AC_MSG_CHECKING([whether __thread support in g++ is usable])
+ case "$ax_cv_gxx_version" in
+ 1.* | 2.* | 3.* )
+ AC_MSG_RESULT([no, it's broken])
+ wx_cv_cc___thread=no
+ ;;
+ *)
+ AC_MSG_RESULT([yes, it works])
+ ;;
+ esac
+ fi
+ fi
+
+ if test "$wx_cv_cc___thread" = "yes"; then
+ AC_DEFINE(HAVE___THREAD_KEYWORD)
+ fi
+ fi
fi
dnl from if !MSW
dnl DEBUG_CFLAGS contains debugging options (supposed to be the same for C and C++
dnl compilers: we'd need a separate DEBUG_CXXFLAGS if this is ever not the case)
DEBUG_CFLAGS=
-if test "$wxUSE_DEBUG_INFO" = "yes" ; then
+if `echo $CXXFLAGS $CFLAGS | grep " -g" >/dev/null`; then
+ dnl the CXXFLAGS or the CFLAGS variable already contains the -g flag
+ dnl (e.g. it was specified by the user before running configure); since
+ dnl later they will be merged with DEBUG_CFLAGS, don't set the -g option
+ dnl in DEBUG_CFLAGS to avoid (possibly different) flag duplicates
+ AC_MSG_WARN([CXXFLAGS/CFLAGS already contains -g flag; ignoring the --enable-debug_info option])
+elif test "$wxUSE_DEBUG_INFO" = "yes" ; then
DEBUG_CFLAGS="-g"
fi
fi
fi
-if test "$wxUSE_DEBUG_FLAG" = "yes" ; then
- AC_DEFINE(WXDEBUG)
- WXCONFIG_CPPFLAGS="$WXCONFIG_CPPFLAGS -D__WXDEBUG__"
-else
+if test "$wxUSE_DEBUG_FLAG" = "no" ; then
if test "$wxUSE_GTK" = 1 ; then
if test "x$wxGTK_VERSION" = "x1" ; then
CPPFLAGS="-DGTK_NO_CHECK_CASTS $CPPFLAGS"
if test "$GCC" = "yes" ; then
if test "$wxUSE_NO_RTTI" = "yes" ; then
- WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -fno-rtti"
+ dnl Define wxNO_RTTI on the command line because only g++ 4.3 and later
+ dnl define __GXX_RTTI which allows us to detect the use of -fno-rtti
+ dnl switch but we need to do it manually for the older versions.
+ WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -DwxNO_RTTI -fno-rtti"
fi
if test "$wxUSE_NO_EXCEPTIONS" = "yes" ; then
WXCONFIG_CXXFLAGS="$WXCONFIG_CXXFLAGS -fno-exceptions"
dnl C/C++ compiler option for optimization (supposed to be the same for both)
OPTIMISE_CFLAGS=
-if test "$wxUSE_OPTIMISE" = "no" ; then
- if test "$GCC" = yes ; then
- dnl use -O0 because compiling with it is faster than compiling with no
- dnl optimization options at all (at least with g++ 3.2)
- OPTIMISE_CFLAGS="-O0"
- fi
+if `echo $CXXFLAGS $CFLAGS | grep " -O" >/dev/null`; then
+ dnl the CXXFLAGS or the CFLAGS variable already contains -O optimization flag
+ dnl (e.g. it was specified by the user before running configure); since
+ dnl later they will be merged with OPTIMISE_CFLAGS, don't set the -O option
+ dnl in OPTIMISE_CFLAGS to avoid (possibly different) flag duplicates
+ AC_MSG_WARN([CXXFLAGS/CFLAGS already contains -O flag; ignoring the --disable-optimise option])
else
- if test "$GCC" = yes ; then
- case "${host}" in
- *-pc-os2_emx | *-pc-os2-emx )
- dnl Not all of the supported gcc versions understand
- dnl -fstrict-aliasing and none actually needs it (yet).
- OPTIMISE_CFLAGS="-O2"
- ;;
- *)
- dnl Switch on optimisation but keep strict-aliasing off for
- dnl now (see -fstrict-aliasing in the gcc manual). When it is
- dnl switched back on consider using -Wstrict-aliasing=2.
- OPTIMISE_CFLAGS="-O2 -fno-strict-aliasing"
- ;;
- esac
+ if test "$wxUSE_OPTIMISE" = "no" ; then
+ if test "$GCC" = yes ; then
+ dnl use -O0 because compiling with it is faster than compiling with no
+ dnl optimization options at all (at least with g++ 3.2)
+ OPTIMISE_CFLAGS="-O0"
+ fi
else
- OPTIMISE_CFLAGS="-O"
+ if test "$GCC" = yes ; then
+ case "${host}" in
+ *-pc-os2_emx | *-pc-os2-emx )
+ dnl Not all of the supported gcc versions understand
+ dnl -fstrict-aliasing and none actually needs it (yet).
+ OPTIMISE_CFLAGS="-O2"
+ ;;
+ *)
+ dnl Switch on optimisation but keep strict-aliasing off for
+ dnl now (see -fstrict-aliasing in the gcc manual). When it is
+ dnl switched back on consider using -Wstrict-aliasing=2.
+ OPTIMISE_CFLAGS="-O2 -fno-strict-aliasing"
+ ;;
+ esac
+ else
+ OPTIMISE_CFLAGS="-O"
+ fi
fi
fi
fi
fi
+dnl ---------------------------------------------------------------------------
+dnl File system watcher checks
+dnl ---------------------------------------------------------------------------
+
+if test "$wxUSE_FSWATCHER" = "yes"; then
+ dnl wxFileSystemWatcher is always available under MSW but we need either
+ dnl inotify or kqueue support in the system for it under Unix (this
+ dnl includes OS X which does have kqueue but no other platforms)
+ if test "$wxUSE_MSW" != "1"; then
+ if test "$wxUSE_UNIX" = "yes"; then
+ AC_CHECK_HEADERS(sys/inotify.h,,, [AC_INCLUDES_DEFAULT()])
+ if test "$ac_cv_header_sys_inotify_h" = "yes"; then
+ AC_DEFINE(wxHAS_INOTIFY)
+ else
+ AC_CHECK_HEADERS(sys/event.h,,, [AC_INCLUDES_DEFAULT()])
+ if test "$ac_cv_header_sys_event_h" = "yes"; then
+ AC_DEFINE(wxHAS_KQUEUE)
+ else
+ wxUSE_FSWATCHER=no
+ fi
+ fi
+ else
+ wxUSE_FSWATCHER=no
+ fi
+ fi
+
+ if test "$wxUSE_FSWATCHER" = "yes"; then
+ AC_DEFINE(wxUSE_FSWATCHER)
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS fswatcher"
+ else
+ AC_MSG_WARN([wxFileSystemWatcher won't be available on this platform])
+ fi
+fi
+
dnl ---------------------------------------------------------------------------
dnl Register non-GUI class options for makefiles and setup.h
dnl ---------------------------------------------------------------------------
AC_DEFINE(wxUSE_EXTENDED_RTTI)
fi
+if test "$wxUSE_ANY" = "yes"; then
+ AC_DEFINE(wxUSE_ANY)
+fi
+
if test "$wxUSE_APPLE_IEEE" = "yes"; then
AC_DEFINE(wxUSE_APPLE_IEEE)
fi
CFLAGS="$CFLAGS $HILDON_CFLAGS"
CXXFLAGS="$CXXFLAGS $HILDON_CFLAGS"
AC_DEFINE(wxUSE_LIBHILDON)
+ ac_hildon_lgpl=1
],
[
AC_MSG_WARN([libhildon_lgpl not found])
wxUSE_LIBHILDON="no"
+ ac_hildon_lgpl=0
]
)
+
+ if test "$ac_hildon_lgpl" = 0 ; then
+ PKG_CHECK_MODULES(HILDON2,
+ [hildon-1 >= 1.99],
+ [
+ EXTRALIBS_HILDON="$HILDON2_LIBS"
+ CFLAGS="$CFLAGS $HILDON2_CFLAGS"
+ CXXFLAGS="$CXXFLAGS $HILDON2_CFLAGS"
+ AC_DEFINE(wxUSE_LIBHILDON2)
+ ],
+ [
+ AC_MSG_WARN([libhildon_1 not found])
+ wxUSE_LIBHILDON2="no"
+ ]
+ )
+ fi
fi
fi
fi
fi
+if test "$wxUSE_FILE_HISTORY" = "yes"; then
+ AC_DEFINE(wxUSE_FILE_HISTORY)
+fi
+
if test "$wxUSE_FILESYSTEM" = "yes"; then
if test "$wxUSE_STREAMS" != yes -o \( "$wxUSE_FILE" != yes -a "$wxUSE_FFILE" != yes \); then
AC_MSG_WARN(wxFileSystem requires wxStreams and wxFile or wxFFile... disabled)
fi
if test "$wxUSE_DATETIME" = "yes"; then
- dnl check for strptime and for its declaration as some systems lack it
- AC_CHECK_FUNC(strptime)
- if test "$ac_cv_func_strptime" = "yes"; then
- AC_CACHE_CHECK([for strptime declaration], wx_cv_func_strptime_decl,
- [
- AC_LANG_PUSH(C++)
- AC_TRY_COMPILE(
- [
- #include <time.h>
- ],
- [
- struct tm t;
- strptime("foo", "bar", &t);
- ],
- wx_cv_func_strptime_decl=yes,
- wx_cv_func_strptime_decl=no
- )
- AC_LANG_POP()
- ]
- )
- fi
- if test "$wx_cv_func_strptime_decl" = "yes"; then
- AC_DEFINE(HAVE_STRPTIME_DECL)
- else
- wx_strptime_decl="extern char *strptime(const char *, const char *, struct tm *);"
- fi
- if test "$ac_cv_func_strptime" = "yes"; then
- dnl strptime() behaviour doesn't conform to POSIX under Mac OS X <
- dnl 10.5 and possibly other BSD variants, check that strptime() we
- dnl have fails to parse format when the string doesn't match it instea
- dnl of just stopping immediately and returning non-NULL
- AC_CACHE_CHECK([whether strptime() fails on invalid strings],
- wx_cv_func_strptime_ok,
- [AC_RUN_IFELSE(
- [
- #include <stdlib.h>
- #include <time.h>
- #include "confdefs.h"
-
- $wx_strptime_decl
-
- int main()
- {
- struct tm t;
- return !!strptime("", "%x", &t);
- }
- ],
- wx_cv_func_strptime_ok=yes,
- wx_cv_func_strptime_ok=no,
- dnl be pessimistic when cross-compiling
- wx_cv_func_strptime_ok=no
- )]
- )
-
- if test "$wx_cv_func_strptime_ok" = "yes"; then
- AC_DEFINE(HAVE_STRPTIME)
- fi
- fi
-
dnl check for timezone variable
dnl doesn't exist under Darwin / Mac OS X which uses tm_gmtoff instead
AC_CACHE_CHECK(for timezone variable in <time.h>,
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dnd"
fi
+if test "$wxUSE_CLIPBOARD" = "yes"; then
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS clipboard"
+fi
+
if test "$wxUSE_SPLINES" = "yes" ; then
AC_DEFINE(wxUSE_SPLINES)
fi
AC_DEFINE(wxUSE_MOUSEWHEEL)
fi
+if test "$wxUSE_UIACTIONSIMULATOR" = "yes" ; then
+ AC_DEFINE(wxUSE_UIACTIONSIMULATOR)
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS uiaction"
+fi
+
dnl ---------------------------------------------------------------------------
dnl GUI controls
dnl ---------------------------------------------------------------------------
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS grid"
fi
+if test "$wxUSE_HEADERCTRL" = "yes"; then
+ AC_DEFINE(wxUSE_HEADERCTRL)
+ USES_CONTROLS=1
+fi
+
if test "$wxUSE_HYPERLINKCTRL" = "yes"; then
AC_DEFINE(wxUSE_HYPERLINKCTRL)
USES_CONTROLS=1
AC_DEFINE(wxUSE_IMAGLIST)
fi
+if test "$wxUSE_INFOBAR" = "yes"; then
+ AC_DEFINE(wxUSE_INFOBAR)
+fi
+
if test "$wxUSE_LISTBOOK" = "yes"; then
AC_DEFINE(wxUSE_LISTBOOK)
USES_CONTROLS=1
if test "$wxUSE_EDITABLELISTBOX" = "yes"; then
AC_DEFINE(wxUSE_EDITABLELISTBOX)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS editlbox"
fi
if test "$wxUSE_NOTEBOOK" = "yes"; then
USES_CONTROLS=1
fi
+if test "$wxUSE_REARRANGECTRL" = "yes"; then
+ AC_DEFINE(wxUSE_REARRANGECTRL)
+fi
+
if test "$wxUSE_SASH" = "yes"; then
AC_DEFINE(wxUSE_SASH)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS sashtest"
if test "$wxUSE_SCROLLBAR" = "yes"; then
AC_DEFINE(wxUSE_SCROLLBAR)
USES_CONTROLS=1
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll scrollsub"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS scroll"
fi
if test "$wxUSE_SEARCHCTRL" = "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS statbar"
fi
-if test "$wxUSE_TAB_DIALOG" = "yes"; then
- AC_DEFINE(wxUSE_TAB_DIALOG)
-fi
-
if test "$wxUSE_TEXTCTRL" = "yes"; then
AC_DEFINE(wxUSE_TEXTCTRL)
USES_CONTROLS=1
fi
if test "$wxUSE_TOGGLEBTN" = "yes"; then
- if test "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
AC_MSG_WARN([Toggle button not yet supported under Mac OS X... disabled])
wxUSE_TOGGLEBTN=no
fi
fi
if test "$wxUSE_POPUPWIN" = "yes"; then
- if test "$wxUSE_COCOA" = 1 ; then
+ if test "$wxUSE_OLD_COCOA" = 1 ; then
AC_MSG_WARN([Popup window not yet supported under Mac OS X... disabled])
else
if test "$wxUSE_PM" = 1; then
fi
if test "$wxUSE_DIALUP_MANAGER" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1 -o "$wxUSE_MGL" = 1; then
+ if test "$wxUSE_MAC" = 1 -o "$wxUSE_OLD_COCOA" = 1 -o "$wxUSE_MGL" = 1; then
AC_MSG_WARN([Dialup manager not supported on this platform... disabled])
else
AC_DEFINE(wxUSE_DIALUP_MANAGER)
#include <WebKit/WebKit.h>
])
CPPFLAGS="$old_CPPFLAGS"
- elif test "$wxUSE_COCOA" = 1; then
+ elif test "$wxUSE_OLD_COCOA" = 1; then
AC_DEFINE(wxUSE_WEBKIT)
else
wxUSE_WEBKIT=no
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS propgrid"
fi
+USE_RIBBON=0
+if test "$wxUSE_RIBBON" = "yes"; then
+ AC_DEFINE(wxUSE_RIBBON)
+ USE_RIBBON=1
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ribbon"
+fi
+
USE_STC=0
if test "$wxUSE_STC" = "yes"; then
AC_DEFINE(wxUSE_STC)
USE_STC=1
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS stc"
+
+ dnl python is used to update src/stc.h (see build/bakefiles/scintilla.bkl)
+ AC_PATH_PROG(PYTHON, python)
+ if test "x$PYTHON" = "x"; then
+ COND_PYTHON="#"
+ fi
+ AC_SUBST(COND_PYTHON)
fi
if test "$wxUSE_MENUS" = "yes"; then
dnl wxGraphicsContext
dnl ---------------------------------------------------------------------------
+dnl Under Mac we don't even provide --enable-graphics_ctx switch as we always
+dnl need it -- but because we don't have the option, wxUSE_GRAPHICS_CONTEXT is
+dnl not defined automatically and we need to do it ourselves
if test "$wxUSE_MAC" = 1; then
- wxUSE_GRAPHICS_CONTEXT="yes"
+ wxUSE_GRAPHICS_CONTEXT="yes"
fi
if test "$wxUSE_GRAPHICS_CONTEXT" = "yes"; then
- if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
- AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
- elif test "$wxUSE_GTK" != 1; then
- dnl for other builds we'll just wing it for now...
- AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
- else
- dnl ...but let's check for cairo availability for wxGTK builds
- PKG_CHECK_MODULES(CAIRO, cairo,
- [AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)],
- [AC_MSG_WARN([Cairo library not found, unable to set wxUSE_GRAPHICS_CONTEXT])]
- )
- fi
+ wx_has_graphics=0
+ if test "$wxUSE_MSW" = 1; then
+ AC_CACHE_CHECK([if GDI+ is available], wx_cv_lib_gdiplus,
+ [
+ dnl we need just the header, not the library, as we load the
+ dnl GDI+ DLL dynamically anyhow during run-time
+ AC_LANG_PUSH(C++)
+ AC_TRY_COMPILE(
+ [#include <windows.h>
+ #include <gdiplus.h>],
+ [
+ using namespace Gdiplus;
+ ],
+ wx_cv_lib_gdiplus=yes,
+ wx_cv_lib_gdiplus=no
+ )
+ AC_LANG_POP()
+ ]
+ )
+ if test "$wx_cv_lib_gdiplus" = "yes"; then
+ wx_has_graphics=1
+ fi
+ elif test "$wxUSE_GTK" = 1; then
+ PKG_CHECK_MODULES(CAIRO, cairo,
+ [wx_has_graphics=1],
+ [AC_MSG_WARN([Cairo library not found])]
+ )
+ else
+ dnl assume it's ok, add more checks here if needed
+ wx_has_graphics=1
+ fi
+
+ if test "$wx_has_graphics" = 1; then
+ AC_DEFINE(wxUSE_GRAPHICS_CONTEXT)
+ else
+ AC_MSG_WARN([wxGraphicsContext won't be available])
+ fi
fi
dnl ---------------------------------------------------------------------------
dnl get the string with OS info - used by wxGetOsDescription() on MacOS X
dnl ---------------------------------------------------------------------------
-if test "$cross_compiling" = "yes"; then
+if test "$cross_compiling" != "no"; then
dnl Use best guess from host as we can't use uname when cross compiling
OSINFO="\"$host\""
else
if test "$wxUSE_PROPGRID" = "yes" ; then
BUILT_WX_LIBS="propgrid $BUILT_WX_LIBS"
fi
+ if test "$wxUSE_RIBBON" = "yes" ; then
+ BUILT_WX_LIBS="ribbon $BUILT_WX_LIBS"
+ fi
if test "$wxUSE_RICHTEXT" = "yes" ; then
BUILT_WX_LIBS="richtext $BUILT_WX_LIBS"
fi
dnl ---------------------------------------------------------------------------
dnl all additional libraries (except wxWidgets itself) we link with
-
+EXTRA_FRAMEWORKS=
if test "$wxUSE_MAC" = 1 ; then
- if test "$wxUSE_SOUND" = "yes" || test "$wxUSE_MEDIACTRL" = "yes"; then
- if test "$USE_DARWIN" = 1; then
- LDFLAGS="$LDFLAGS -framework QuickTime"
- fi
- fi
if test "$USE_DARWIN" = 1; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework Carbon -framework Cocoa -framework AudioToolbox -framework System -framework OpenGL"
+ EXTRA_FRAMEWORKS="-framework IOKit -framework Carbon -framework Cocoa -framework AudioToolbox -framework System -framework OpenGL -framework QuickTime"
fi
fi
-if test "$wxUSE_COCOA" = 1 ; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework Cocoa"
+if test "$wxUSE_OLD_COCOA" = 1 ; then
+ EXTRA_FRAMEWORKS="-framework IOKit -framework Cocoa"
if test "$wxUSE_MEDIACTRL" = "yes"; then
- LDFLAGS="$LDFLAGS -framework QuickTime"
+ EXTRA_FRAMEWORKS="$EXTRA_FRAMEWORKS -framework QuickTime"
fi
fi
-if test "$USE_DARWIN" = 1 -a "$wxUSE_MAC" != 1 -a "$wxUSE_COCOA" != 1 ; then
- LDFLAGS="$LDFLAGS -framework IOKit -framework CoreServices -framework System -framework ApplicationServices"
+if test "$USE_DARWIN" = 1 -a "$wxUSE_MAC" != 1 -a "$wxUSE_OLD_COCOA" != 1 ; then
+ EXTRA_FRAMEWORKS="$EXTRA_FRAMEWORKS -framework IOKit -framework CoreServices -framework System -framework ApplicationServices"
fi
+LDFLAGS="$LDFLAGS $EXTRA_FRAMEWORKS"
+WXCONFIG_LDFLAGS="$WXCONFIG_LDFLAGS $EXTRA_FRAMEWORKS"
+
LIBS="$ZLIB_LINK $POSIX4_LINK $INET_LINK $WCHAR_LINK $DL_LINK $LIBS"
if test "$wxUSE_GUI" = "yes"; then
dnl TODO some samples are never built so far: mfc (requires VC++)
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS artprov controls dialogs drawing \
- erase event exec font image minimal mobile \
- mobile/wxedit mobile/styles render \
- shaped svg taborder vscroll widgets"
+ erase event exec font image minimal render \
+ shaped svg taborder vscroll widgets wrapsizer"
if test "$wxUSE_MONOLITHIC" != "yes"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS console"
if test "$TOOLKIT" = "MSW"; then
SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS regtest"
if test "$wxUSE_UNIVERSAL" != "yes"; then
- SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ownerdrw nativdlg"
+ SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS ownerdrw nativdlg dll"
fi
fi
if test "$TOOLKIT" = "PM" -a "$wxUSE_UNIVERSAL" != "yes"; then
elif test "$GXX" = yes ; then
CXXWARNINGS="-Wall -Wundef -Wunused-parameter -Wno-ctor-dtor-privacy"
AX_CXXFLAGS_GCC_OPTION(-Woverloaded-virtual, CXXWARNINGS)
+
+ dnl when building under Mac we currently get hundreds of deprecation
+ dnl warnings for Carbon symbols from the standard headers -- disable them
+ dnl as we already know that they're deprecated and nothing else can be seen
+ dnl with these warnings on
+ if test "$wxUSE_MAC" = 1 ; then
+ CXXWARNINGS="$CXXWARNINGS -Wno-deprecated-declarations"
+ fi
fi
EXTRALIBS_XML="$EXPAT_LINK"
EXTRALIBS_HTML="$MSPACK_LINK"
EXTRALIBS_MEDIA="$GST_LIBS"
-EXTRALIBS_STC="-lwxscintilla${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
+EXTRALIBS_STC="-lwxscintilla${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX}"
if test "$wxUSE_GUI" = "yes"; then
EXTRALIBS_GUI=`echo $GUI_TK_LIBRARY $PNG_LINK $JPEG_LINK $TIFF_LINK $WEBKIT_LINK $EXTRALIBS_HILDON $EXTRALIBS_GNOMEVFS $EXTRALIBS_GNOMEPRINT`
fi
fi
for i in $wxconfig_3rdparty ; do
- WXCONFIG_LIBS="-lwx${i}${lib_debug_suffix}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX} $WXCONFIG_LIBS"
+ WXCONFIG_LIBS="-lwx${i}${WX_LIB_FLAVOUR}-${WX_RELEASE}${HOST_SUFFIX} $WXCONFIG_LIBS"
done
AC_SUBST(EXTRALIBS_GNOMEVFS)
AC_SUBST(EXTRALIBS_HILDON)
AC_SUBST(UNICODE)
-AC_SUBST(BUILD)
AC_SUBST(DEBUG_INFO)
AC_SUBST(DEBUG_FLAG)
-TOOLKIT_LOWERCASE=xxx
-if test "$TOOLKIT" = "MAC"; then
- TOOLKIT_LOWERCASE=osx_carbon
-fi
-if test "$TOOLKIT" = "OSX_CARBON"; then
- TOOLKIT_LOWERCASE=osx_carbon
-fi
-if test "$TOOLKIT" = "OSX_COCOA"; then
- TOOLKIT_LOWERCASE=osx_cocoa
-fi
-if test "$TOOLKIT_LOWERCASE" = "xxx"; then
- TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr '[[A-Z]]' '[[a-z]]'`
-fi
+TOOLKIT_LOWERCASE=`echo $TOOLKIT | tr '[[A-Z]]' '[[a-z]]'`
AC_SUBST(TOOLKIT_LOWERCASE)
AC_SUBST(TOOLKIT_VERSION)
+AC_SUBST(DYLIB_RPATH_INSTALL)
+AC_SUBST(DYLIB_RPATH_POSTLINK)
AC_SUBST(SAMPLES_RPATH_FLAG)
-AC_SUBST(SAMPLES_RPATH_POSTLINK)
+AC_SUBST(HEADER_PAD_OPTION)
AC_SUBST(HOST_SUFFIX)
AC_SUBST(CPPUNIT_CFLAGS)
AC_SUBST(CPPUNIT_LIBS)
if test "$wxUSE_LIBHILDON" = "yes"; then
TOOLKIT_EXTRA="$TOOLKIT_EXTRA hildon"
fi
+ if test "$wxUSE_LIBHILDON2" = "yes"; then
+ TOOLKIT_EXTRA="$TOOLKIT_EXTRA hildon"
+ fi
if test "$TOOLKIT_EXTRA" != ""; then
TOOLKIT_DESC="$TOOLKIT_DESC with support for `echo $TOOLKIT_EXTRA | tr -s ' '`"
AC_MSG_ERROR([Required windres program not found])
fi
- RESCOMP="$WINDRES"
+ RESCOMP="$WINDRES $WINDRES_CPU_DEFINE"
fi
-if test "$wxUSE_MAC" = 1 -o "$wxUSE_COCOA" = 1; then
+if test "$wxUSE_MAC" = 1 -o "$wxUSE_OLD_COCOA" = 1; then
dnl base name of the resource file for wxMac must be the same
dnl as library installation base name (-install_name)
WX_RESOURCES_MACOSX_ASCII="libwx_${TOOLCHAIN_NAME}.${wx_release_number}.r"
AC_SUBST(WX_VERSION)
AC_SUBST(WX_SUBVERSION)
AC_SUBST(WX_CHARTYPE)
-AC_SUBST(WX_DEBUGTYPE)
dnl note that in addition to the usual CPP/C/CXXFLAGS which are used for
dnl building the library itself, we also have WXCONFIG_-prefixed variants which
AC_SUBST(WXCONFIG_LIBS)
AC_SUBST(WXCONFIG_RPATH)
+AC_SUBST(WXCONFIG_LDFLAGS)
AC_SUBST(WXCONFIG_LDFLAGS_GUI)
AC_SUBST(WXCONFIG_RESFLAGS)
AC_CONFIG_HEADERS([lib/wx/include/${TOOLCHAIN_FULLNAME}/wx/setup.h:setup.h.in])
if test "$USE_WIN32" = 1; then
- AC_CONFIG_COMMANDS(
- [
- rcdefs.h
- ],
+ AC_CONFIG_COMMANDS([rcdefs.h],
[
mkdir -p $outdir &&
$CPP $infile | sed 's/^# *[1-9].*//;s/^ *//;/./,/^$/!d' > $outdir/rcdefs.h
echo ""
echo " Which GUI toolkit should wxWidgets use? ${TOOLKIT_DESC}"
echo " Should wxWidgets be compiled into single library? ${wxUSE_MONOLITHIC:-yes}"
-
-echo " Should wxWidgets be compiled in debug mode? ${wxUSE_DEBUG:-no}"
echo " Should wxWidgets be linked as a shared library? ${wxUSE_SHARED:-no}"
echo $ECHO_N " Should wxWidgets support Unicode? ${wxUSE_UNICODE:-no}$ECHO_C"
if test "$wxUSE_UNICODE" = "yes"; then
projects / wxWidgets.git / blobdiff