+++ /dev/null
-#----------------------------------------------------------------------
-# Name: wxPython.spec
-# Purpose: RPM Build and packaging instructions
-#
-# Author: Robin Dunn
-#
-# RCS-ID: $Id$
-# Copyright: (c) 2004 by Total Control Software
-# Licence: wxWindows license
-#----------------------------------------------------------------------
-
-
-# The following values can be set on the rpmbuild command line with
-# --define 'name VALUE' If no value is set on the command line then
-# the default value set here will be used instead.
-
-
-# Which version of Python to build with. Used to assemble python
-# binary name so use '2.3', '2.4', etc.
-%if %{?pyver:0}%{!?pyver:1}
-%define pyver 2.4
-%endif
-
-
-# Which wxWidgets port to build and use. Current acceptable values
-# are 'gtk' and 'gtk2'.
-%if %{?port:0}%{!?port:1}
-%define port gtk2
-%endif
-
-
-# Build in unicode mode? Can only be used if port is gtk2, acceptable
-# values are '0' and '1'
-%if %{?unicode:0}%{!?unicode:1}
-%define unicode 1
-%endif
-
-
-# Should the builtin image and etc. libs be used, or system libs?
-# Distro specific RPMs should probably set this to 0, generic ones
-# should use 1.
-# NOTE: I'm trying 0 for this next release to see if I can get rid of
-# this...
-%if %{?builtin_libs:0}%{!?builtin_libs:1}
-%define builtin_libs 0
-%endif
-
-
-# Should --enable-debug_flag be used in release builds? Using it
-# defines __WXDEBUG__ and gives us runtime diagnostics that are turned
-# into Python exceptions. (So turning it on is a very helpful thing
-# IMO and is recommended.) The code is still compiled with
-# optimization flags and and without debug info and such when this
-# option is used, it simply turns on some extra code.
-%if %{?debug_flag:0}%{!?debug_flag:1}
-%define debug_flag 1
-%endif
-
-
-# Used to set the Release tag below. I normally use it to define what
-# distro the RPM was built on and also include the version of Python
-# it was built with.
-%if %{?release:0}%{!?release:1}
-%define release 1_py%{pyver}
-%endif
-
-
-# This one is used to control whether the full 4 components of the
-# verseion number are used in the site-packages subdirectory name. By
-# default only 2 or 3 components (depending on stable/unstable status)
-# are used.
-%if %{?fullver:0}%{!?fullver:1}
-%define fullver 0
-%endif
-
-
-# Whether to add --enable-mediactrl to the wxWidgets configure. For
-# some older versions of gstreamer-0.8 it currently incorerctly allows
-# its use eventhough there is a compatibility problem that causes a
-# failed compile.
-%if %{?mediactrl:0}%{!?mediactrl:1}
-%define mediactrl 1
-%endif
-
-
-#----------------------------------------------------------------------
-# Other variables used below
-
-%define pref %{_prefix}
-%define python /usr/bin/python%{pyver}
-%define tarname @TARNAME@
-%define version @VERSION@
-%define ver2 @VER2@
-
-%define chartype %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
-%define gtktype %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
-%define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
-
-%define wxprefbase %{pref}/lib/wxPython
-%define wxpref %{wxprefbase}-%{version}-%{port}-%{chartype}
-%define pkgname wxPython
-
-# turn off the generation of debuginfo rpm (RH9) ??
-%define debug_package %{nil}
-
-
-#----------------------------------------------------------------------
-# Package definition
-#----------------------------------------------------------------------
-Name: %{pkgname}%{ver2}
-Summary: Cross platform GUI toolkit for Python
-Version: %{version}
-Release: %{release}
-Source0: %{tarname}-%{version}.tar.bz2
-License: wx Library Licence, Version 3
-URL: http://wxPython.org/
-Packager: Robin Dunn <robin@alldunn.com>
-Group: Development/Python
-BuildRoot: %{_tmppath}/%{pkgname}-buildroot
-Prefix: %{pref}
-
-%description
-Cross platform GUI toolkit for Python
-
-
-
-
-%package -n %{pkgname}%{ver2}-%{port}-%{chartype}
-Summary: Cross platform GUI toolkit for Python
-Group: Development/Python
-Requires: %{pkgname}-common
-Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype}
-Provides: wxPython
-
-
-%description -n %{pkgname}%{ver2}-%{port}-%{chartype}
-wxPython is a GUI toolkit for the Python programming language. It
-allows Python programmers to create programs with a robust, highly
-functional graphical user interface, simply and easily. It is
-implemented as a Python extension module (native code) that wraps the
-popular wxWidgets cross platform GUI library, which is written in C++.
-
-wxPython is a cross-platform toolkit. The same program will usually
-run on multiple platforms without modification. Currently supported
-platforms are 32-bit Microsoft Windows, most Unix or unix-like
-systems, and Macintosh OS X.
-
-This package contains the wxPython runtime files built for the
-wxWidgets %{port} port with %{chartype} character type.
-
-
-
-
-
-%package -n %{pkgname}-common-%{port}-%{chartype}
-Summary: Common files for needed by all wxPython runtimes
-Group: Development/Python
-Provides: %{pkgname}-common
-
-# They obsolete each other so any of them can be installed over another
-# without conflicts
-Obsoletes: %{pkgname}-common-gtk-ansi
-Obsoletes: %{pkgname}-common-gtk2-ansi
-Obsoletes: %{pkgname}-common-gtk2-unicode
-
-%description -n %{pkgname}-common-%{port}-%{chartype}
-This package contains the common files needed by any version of the
-wxPython runtime. This pacakge also installs a wx.pth file which will
-determine which of the installed runtimes is the default version of
-wxPython that is imported automatically with a bare "import wx".
-
-
-
-
-
-%package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
-Summary: wxPython development files
-Group: Development/Libraries
-Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
-
-%description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
-This packages contains the headers and etc. for building apps or
-Python extension modules that use the same wxWidgets shared libraries
-that wxPython uses.
-
-
-
-#----------------------------------------------------------------------
-%prep
-%setup -q -n %{tarname}-%{version}
-
-
-#----------------------------------------------------------------------
-%build
-
-WXDIR=`pwd`
-
-# Configure and build wxWidgets
-mkdir bld
-cd bld
-../configure \
-%if %{using_gtk1}
- --with-gtk=1 \
-%else
- --with-gtk=2 \
-%endif
- --prefix=%{wxpref} \
- --disable-monolithic \
- --disable-rpath \
- --with-opengl \
- --with-gnomeprint \
- --enable-geometry \
- --enable-graphics_ctx \
- --enable-optimise \
- --enable-sound --with-sdl \
-%if %{mediactrl}
- --enable-mediactrl \
-%endif
- --enable-display \
-%if %{unicode}
- --enable-unicode \
-%else
- --disable-unicode \
-%endif
-%if %{debug_flag}
- --enable-debug_flag \
-%endif
- --disable-debugreport \
-%if %{builtin_libs}
- --with-libjpeg=builtin \
- --with-libpng=builtin \
- --with-libtiff=builtin \
- --with-zlib=builtin \
-%endif
-
-
-make
-make -C contrib/src/gizmos
-make -C contrib/src/stc
-
-
-
-# Build wxPython
-cd $WXDIR/wxPython
-%{python} setup.py \
- WXPORT=%{port} \
- UNICODE=%{unicode} \
- EP_ADD_OPTS=1 \
- EP_FULL_VER=%{fullver} \
- NO_SCRIPTS=1 \
- WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
- build_ext --rpath=%{wxpref}/lib \
- build
-
-
-
-#----------------------------------------------------------------------
-%install
-
-WXDIR=`pwd`
-
-# Install wxGTK and contribs
-cd bld
-make prefix=$RPM_BUILD_ROOT%{wxpref} install
-make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
-make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
-
-
-
-# Install wxPython for wxGTK
-cd $WXDIR/wxPython
-%{python} setup.py \
- WXPORT=%{port} \
- UNICODE=%{unicode} \
- EP_ADD_OPTS=1 \
- EP_FULL_VER=%{fullver} \
- NO_SCRIPTS=1 \
- WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
- build_ext --rpath=%{wxpref}/lib \
- install \
- --root=$RPM_BUILD_ROOT
-
-
-# remove the wx-config symlink, we'll redo it when installing the -devel package
-rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
-
-# make sure that debug info is stripped
-strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
-
-
-# Since I want this RPM to be as generic as possible I won't let
-# distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
-# the #! line to use the real python pathname. Since some distros
-# install python 2.2 as python2 and others as python I can't let
-# distutils do that otherwise the dependencies will be fouled up.
-# Copy them manually instead, leaving the #!/usr/bin/env line intact.
-cd $WXDIR/wxPython
-mkdir -p $RPM_BUILD_ROOT%{pref}/bin
-for s in \
- helpviewer \
- img2png \
- img2py \
- img2xpm \
- pyalacarte \
- pyalamode \
- pycrust \
- pywrap \
- pyshell \
- pywxrc \
- xrced; do
- cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
-done
-
-
-
-# install KDE & GNOME menu items
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
-for d in distrib/*.desktop; do
- install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
- install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
-done
-
-# install KDE icons
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
-mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
-install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
-install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
-install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
-install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
-install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
-install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
-
-# install Mandrake menu items
-mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
-cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
-?package(%{pkgname}): \\
- command="%{_bindir}/pyshell" \\
- needs="X11" \\
- icon="PyCrust.png" \\
- section="Applications/Development/Tools" \\
- title="PyShell" \\
- longtitle="GUI Python Shell"
-?package(%{pkgname}): \\
- command="%{_bindir}/pycrust" \\
- needs="X11" \\
- icon="PyCrust.png" \\
- section="Applications/Development/Tools" \\
- title="PyCrust" \\
- longtitle="GUI Python Shell with Filling"
-?package(%{pkgname}): \\
- command="%{_bindir}/pyalamode" \\
- needs="X11" \\
- icon="PyCrust.png" \\
- section="Applications/Development/Tools" \\
- title="PyAlaMode" \\
- longtitle="GUI Python Shell with Filling and editor windows"
-?package(%{pkgname}): \\
- command="%{_bindir}/xrced" \\
- needs="X11" \\
- icon="XRCed.png" \\
- section="Applications/Development/Tools" \\
- title="XRCed" \\
- longtitle="wxPython XRC resource editor"
-EOF
-
-
-#----------------------------------------------------------------------
-
-%post -n %{pkgname}%{ver2}-%{port}-%{chartype}
-if [ ! -e %{wxprefbase} ]; then
- ln -s %{pkgname}-%{version}-%{port}-%{chartype} %{wxprefbase}
-fi
-
-%preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
-if [ -L %{wxprefbase} ]; then
- if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
- rm -f %{wxprefbase}
- fi
-fi
-
-
-
-
-%post -n %{pkgname}-common-%{port}-%{chartype}
-# This is done on Mandrake to update its menus:
-if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
-
-%postun -n %{pkgname}-common-%{port}-%{chartype}
-# This is done on Mandrake to update its menus:
-if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
-
-
-
-%post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
-cd %{wxpref}/bin
-ln -s ../lib/wx/config/%{port}-%{chartype}* wx-config
-
-%preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
-rm %{wxpref}/bin/wx-config
-
-
-#----------------------------------------------------------------------
-%clean
-[ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
-
-
-#----------------------------------------------------------------------
-
-%files -n %{pkgname}%{ver2}-%{port}-%{chartype}
-%defattr(-,root,root)
-%doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
-%doc wxPython/docs/*
-%dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
-%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
-%dir %{pref}/lib*/python%{pyver}/site-packages/wxaddons
-%{pref}/lib*/python%{pyver}/site-packages/wxaddons/*
-%dir %{wxpref}
-%dir %{wxpref}/lib
-%{wxpref}/lib/libwx_*
-%dir %{wxpref}/bin
-%{wxpref}/bin/wxrc*
-%{wxpref}/share
-
-
-
-%files -n %{pkgname}-common-%{port}-%{chartype}
-%defattr(-,root,root)
-%{pref}/lib*/python%{pyver}/site-packages/wxversion.*
-%{pref}/lib*/python%{pyver}/site-packages/wx.pth
-%{_bindir}/*
-%{_datadir}/applnk/Development/*
-%{_datadir}/applications/*
-%{_datadir}/icons/hicolor/*/apps/*
-%{_datadir}/pixmaps/*
-%{_libdir}/menu/*
-
-
-
-
-
-%files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
-%defattr(-,root,root)
-%{wxpref}/include
-%{wxpref}/lib/wx
-%dir %{wxpref}/bin
-
-
-#----------------------------------------------------------------------
-# end of file
projects / wxWidgets.git / blobdiff