+void wxControlBase::InitCommandEvent(wxCommandEvent& event) const
+{
+ event.SetEventObject(const_cast<wxControlBase *>(this));
+
+ // event.SetId(GetId()); -- this is usuall done in the event ctor
+
+ switch ( m_clientDataType )
+ {
+ case wxClientData_Void:
+ event.SetClientData(GetClientData());
+ break;
+
+ case wxClientData_Object:
+ event.SetClientObject(GetClientObject());
+ break;
+
+ case wxClientData_None:
+ // nothing to do
+ ;
+ }
+}
+
+bool wxControlBase::SetFont(const wxFont& font)
+{
+ InvalidateBestSize();
+ return wxWindow::SetFont(font);
+}
+
+// wxControl-specific processing after processing the update event
+void wxControlBase::DoUpdateWindowUI(wxUpdateUIEvent& event)
+{
+ // call inherited
+ wxWindowBase::DoUpdateWindowUI(event);
+
+ // update label
+ if ( event.GetSetText() )
+ {
+ if ( event.GetText() != GetLabel() )
+ SetLabel(event.GetText());
+ }
+
+ // Unfortunately we don't yet have common base class for
+ // wxRadioButton, so we handle updates of radiobuttons here.
+ // TODO: If once wxRadioButtonBase will exist, move this code there.
+#if wxUSE_RADIOBTN
+ if ( event.GetSetChecked() )
+ {
+ wxRadioButton *radiobtn = wxDynamicCastThis(wxRadioButton);
+ if ( radiobtn )
+ radiobtn->SetValue(event.GetChecked());
+ }
+#endif // wxUSE_RADIOBTN
+}
+
+/* static */
+wxString wxControlBase::GetLabelText(const wxString& label)
+{
+ // we don't want strip the TABs here, just the mnemonics
+ return wxStripMenuCodes(label, wxStrip_Mnemonics);
+}
+
+/* static */
+wxString wxControlBase::RemoveMnemonics(const wxString& str)
+{
+ // we don't want strip the TABs here, just the mnemonics
+ return wxStripMenuCodes(str, wxStrip_Mnemonics);
+}
+
+/* static */
+wxString wxControlBase::EscapeMnemonics(const wxString& text)
+{
+ wxString label(text);
+ label.Replace("&", "&&");
+ return label;
+}
+
+/* static */
+int wxControlBase::FindAccelIndex(const wxString& label, wxString *labelOnly)
+{
+ // the character following MNEMONIC_PREFIX is the accelerator for this
+ // control unless it is MNEMONIC_PREFIX too - this allows to insert
+ // literal MNEMONIC_PREFIX chars into the label
+ static const wxChar MNEMONIC_PREFIX = wxT('&');
+
+ if ( labelOnly )
+ {
+ labelOnly->Empty();
+ labelOnly->Alloc(label.length());
+ }
+
+ int indexAccel = -1;
+ for ( wxString::const_iterator pc = label.begin(); pc != label.end(); ++pc )
+ {
+ if ( *pc == MNEMONIC_PREFIX )
+ {
+ ++pc; // skip it
+ if ( pc == label.end() )
+ break;
+ else if ( *pc != MNEMONIC_PREFIX )
+ {
+ if ( indexAccel == -1 )
+ {
+ // remember it (-1 is for MNEMONIC_PREFIX itself
+ indexAccel = pc - label.begin() - 1;
+ }
+ else
+ {
+ wxFAIL_MSG(wxT("duplicate accel char in control label"));
+ }
+ }
+ }
+
+ if ( labelOnly )
+ {
+ *labelOnly += *pc;
+ }
+ }
+
+ return indexAccel;
+}
+
+wxBorder wxControlBase::GetDefaultBorder() const
+{
+ return wxBORDER_THEME;
+}
+
+/* static */ wxVisualAttributes
+wxControlBase::GetCompositeControlsDefaultAttributes(wxWindowVariant WXUNUSED(variant))
+{
+ wxVisualAttributes attrs;
+ attrs.font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
+ attrs.colFg = wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOWTEXT);
+ attrs.colBg = wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW);
+
+ return attrs;
+}
+
+// ----------------------------------------------------------------------------
+// wxControl markup support
+// ----------------------------------------------------------------------------
+
+#if wxUSE_MARKUP
+
+/* static */
+wxString wxControlBase::RemoveMarkup(const wxString& markup)
+{
+ return wxMarkupParser::Strip(markup);
+}
+
+bool wxControlBase::DoSetLabelMarkup(const wxString& markup)
+{
+ const wxString label = RemoveMarkup(markup);
+ if ( label.empty() && !markup.empty() )
+ return false;
+
+ SetLabel(label);
+
+ return true;
+}
+
+#endif // wxUSE_MARKUP
+
+// ----------------------------------------------------------------------------
+// wxControlBase - ellipsization code
+// ----------------------------------------------------------------------------
+
+#define wxELLIPSE_REPLACEMENT wxS("...")
+
+namespace
+{
+
+struct EllipsizeCalculator
+{
+ EllipsizeCalculator(const wxString& s, const wxDC& dc,
+ int maxFinalWidthPx, int replacementWidthPx)
+ :
+ m_initialCharToRemove(0),
+ m_nCharsToRemove(0),
+ m_outputNeedsUpdate(true),
+ m_str(s),
+ m_dc(dc),
+ m_maxFinalWidthPx(maxFinalWidthPx),
+ m_replacementWidthPx(replacementWidthPx)
+ {
+ m_isOk = dc.GetPartialTextExtents(s, m_charOffsetsPx);
+ wxASSERT( m_charOffsetsPx.GetCount() == s.length() );
+ }
+
+ bool IsOk() const { return m_isOk; }
+
+ bool EllipsizationNotNeeded() const
+ {
+ // NOTE: charOffsetsPx[n] is the width in pixels of the first n characters (with the last one INCLUDED)
+ // thus charOffsetsPx[len-1] is the total width of the string
+ return m_charOffsetsPx.Last() <= m_maxFinalWidthPx;
+ }
+
+ void Init(size_t initialCharToRemove, size_t nCharsToRemove)
+ {
+ m_initialCharToRemove = initialCharToRemove;
+ m_nCharsToRemove = nCharsToRemove;
+ }
+
+ void RemoveFromEnd()
+ {
+ m_nCharsToRemove++;
+ }
+
+ void RemoveFromStart()
+ {
+ m_initialCharToRemove--;
+ m_nCharsToRemove++;
+ }
+
+ size_t GetFirstRemoved() const { return m_initialCharToRemove; }
+ size_t GetLastRemoved() const { return m_initialCharToRemove + m_nCharsToRemove - 1; }
+
+ const wxString& GetEllipsizedText()
+ {
+ if ( m_outputNeedsUpdate )
+ {
+ wxASSERT(m_initialCharToRemove <= m_str.length() - 1); // see valid range for initialCharToRemove above
+ wxASSERT(m_nCharsToRemove >= 1 && m_nCharsToRemove <= m_str.length() - m_initialCharToRemove); // see valid range for nCharsToRemove above
+
+ // erase m_nCharsToRemove characters after m_initialCharToRemove (included);
+ // e.g. if we have the string "foobar" (len = 6)
+ // ^
+ // \--- m_initialCharToRemove = 2
+ // and m_nCharsToRemove = 2, then we get "foar"
+ m_output = m_str;
+ m_output.replace(m_initialCharToRemove, m_nCharsToRemove, wxELLIPSE_REPLACEMENT);
+ }
+
+ return m_output;
+ }
+
+ bool IsShortEnough()
+ {
+ if ( m_nCharsToRemove == m_str.length() )
+ return true; // that's the best we could do
+
+ // Width calculation using partial extents is just an inaccurate
+ // estimate: partial extents have sub-pixel precision and are rounded
+ // by GetPartialTextExtents(); replacing part of the string with "..."
+ // may change them too thanks to changes in ligatures, kerning etc.
+ //
+ // The correct algorithm would be to call GetTextExtent() in every step
+ // of ellipsization, but that would be too expensive, especially when
+ // the difference is just a few pixels. So we use partial extents to
+ // estimate string width and only verify it with GetTextExtent() when
+ // it looks good.
+
+ int estimatedWidth = m_replacementWidthPx; // length of "..."
+
+ // length of text before the removed part:
+ if ( m_initialCharToRemove > 0 )
+ estimatedWidth += m_charOffsetsPx[m_initialCharToRemove - 1];
+
+ // length of text after the removed part:
+
+ if ( GetLastRemoved() < m_str.length() )
+ estimatedWidth += m_charOffsetsPx.Last() - m_charOffsetsPx[GetLastRemoved()];
+
+ if ( estimatedWidth > m_maxFinalWidthPx )
+ return false;
+
+ return m_dc.GetTextExtent(GetEllipsizedText()).GetWidth() <= m_maxFinalWidthPx;
+ }
+
+ // calculation state:
+
+ // REMEMBER: indexes inside the string have a valid range of [0;len-1] if not otherwise constrained
+ // lengths/counts of characters (e.g. nCharsToRemove) have a
+ // valid range of [0;len] if not otherwise constrained
+ // NOTE: since this point we know we have for sure a non-empty string from which we need
+ // to remove _at least_ one character (thus nCharsToRemove below is constrained to be >= 1)
+
+ // index of first character to erase, valid range is [0;len-1]:
+ size_t m_initialCharToRemove;
+ // how many chars do we need to erase? valid range is [0;len-m_initialCharToRemove]
+ size_t m_nCharsToRemove;
+
+ wxString m_output;
+ bool m_outputNeedsUpdate;
+
+ // inputs:
+ wxString m_str;
+ const wxDC& m_dc;
+ int m_maxFinalWidthPx;
+ int m_replacementWidthPx;
+ wxArrayInt m_charOffsetsPx;
+
+ bool m_isOk;
+};
+
+} // anonymous namespace
+
+/* static and protected */
+wxString wxControlBase::DoEllipsizeSingleLine(const wxString& curLine, const wxDC& dc,
+ wxEllipsizeMode mode, int maxFinalWidthPx,
+ int replacementWidthPx)
+{
+ wxASSERT_MSG(replacementWidthPx > 0, "Invalid parameters");
+ wxASSERT_LEVEL_2_MSG(!curLine.Contains('\n'),
+ "Use Ellipsize() instead!");
+
+ wxASSERT_MSG( mode != wxELLIPSIZE_NONE, "shouldn't be called at all then" );
+
+ // NOTE: this function assumes that any mnemonic/tab character has already
+ // been handled if it was necessary to handle them (see Ellipsize())
+
+ if (maxFinalWidthPx <= 0)
+ return wxEmptyString;
+
+ size_t len = curLine.length();
+ if (len <= 1 )
+ return curLine;
+
+ EllipsizeCalculator calc(curLine, dc, maxFinalWidthPx, replacementWidthPx);
+
+ if ( !calc.IsOk() )
+ return curLine;
+
+ if ( calc.EllipsizationNotNeeded() )
+ return curLine;
+
+ // let's compute the range of characters to remove depending on the ellipsization mode:
+ switch (mode)
+ {
+ case wxELLIPSIZE_START:
+ {
+ calc.Init(0, 1);
+ while ( !calc.IsShortEnough() )
+ calc.RemoveFromEnd();
+
+ // always show at least one character of the string:
+ if ( calc.m_nCharsToRemove == len )
+ return wxString(wxELLIPSE_REPLACEMENT) + curLine[len-1];
+
+ break;
+ }
+
+ case wxELLIPSIZE_MIDDLE:
+ {
+ // NOTE: the following piece of code works also when len == 1
+
+ // start the removal process from the middle of the string
+ // i.e. separe the string in three parts:
+ // - the first one to preserve, valid range [0;initialCharToRemove-1] or the empty range if initialCharToRemove==0
+ // - the second one to remove, valid range [initialCharToRemove;endCharToRemove]
+ // - the third one to preserve, valid range [endCharToRemove+1;len-1] or the empty range if endCharToRemove==len-1
+ // NOTE: empty range != range [0;0] since the range [0;0] contains 1 character (the zero-th one)!
+
+ calc.Init(len/2, 0);
+
+ bool removeFromStart = true;
+
+ while ( !calc.IsShortEnough() )
+ {
+ const bool canRemoveFromStart = calc.GetFirstRemoved() > 0;
+ const bool canRemoveFromEnd = calc.GetLastRemoved() < len - 1;
+
+ if ( !canRemoveFromStart && !canRemoveFromEnd )
+ {
+ // we need to remove all the characters of the string!
+ break;
+ }
+
+ // Remove from the beginning in even steps and from the end
+ // in odd steps, unless we exhausted one side already:
+ removeFromStart = !removeFromStart;
+ if ( removeFromStart && !canRemoveFromStart )
+ removeFromStart = false;
+ else if ( !removeFromStart && !canRemoveFromEnd )
+ removeFromStart = true;
+
+ if ( removeFromStart )
+ calc.RemoveFromStart();
+ else
+ calc.RemoveFromEnd();
+ }
+
+ // Always show at least one character of the string.
+ // Additionally, if there's only one character left, prefer
+ // "a..." to "...a":
+ if ( calc.m_nCharsToRemove == len ||
+ calc.m_nCharsToRemove == len - 1 )
+ {
+ return curLine[0] + wxString(wxELLIPSE_REPLACEMENT);
+ }
+ }
+ break;
+
+ case wxELLIPSIZE_END:
+ {
+ calc.Init(len - 1, 1);
+ while ( !calc.IsShortEnough() )
+ calc.RemoveFromStart();
+
+ // always show at least one character of the string:
+ if ( calc.m_nCharsToRemove == len )
+ return curLine[0] + wxString(wxELLIPSE_REPLACEMENT);
+
+ break;
+ }
+
+ case wxELLIPSIZE_NONE:
+ default:
+ wxFAIL_MSG("invalid ellipsize mode");
+ return curLine;
+ }
+
+ return calc.GetEllipsizedText();
+}
+
+/* static */
+wxString wxControlBase::Ellipsize(const wxString& label, const wxDC& dc,
+ wxEllipsizeMode mode, int maxFinalWidth,
+ int flags)
projects / wxWidgets.git / blobdiff