gtkfeatures.h does not exist under gtk+ 1.3.1, #ifndef it out

[wxWidgets.git] / include / wx / mac / setup.h

diff --git a/include/wx/mac/setup.h b/include/wx/mac/setup.h
index 0ae5dd8e7257e94fed3dbb28968a6434c3d3d5a3..44e5cb73a8d50e2ddb40e28eb41efe83cfc226d7 100644 (file)
--- a/include/wx/mac/setup.h
+++ b/include/wx/mac/setup.h
@@ -12,19 +12,128 @@
 #ifndef _WX_SETUP_H_
 #define _WX_SETUP_H_
 
 #ifndef _WX_SETUP_H_
 #define _WX_SETUP_H_
 

-/*
- * General features
- *
- */
+// ----------------------------------------------------------------------------
+// global settings
+// ----------------------------------------------------------------------------
+
+// define this to 0 when building wxBase library
+#define wxUSE_GUI            1

  
  

+// ----------------------------------------------------------------------------
+// compatibility settings
+// ----------------------------------------------------------------------------
+
+// This setting determines the compatibility with 1.68 API:
+// Level 0: no backward compatibility, all new features
+// Level 1: some extra methods are defined for compatibility.
+//
+// Default is 0.
+//
+// Recommended setting: 0 (in fact the compatibility code is now very minimal
+// so there is little advantage to setting it to 1.
+#define WXWIN_COMPATIBILITY  0
+
+#define WORDS_BIGENDIAN 1
+
+// ----------------------------------------------------------------------------
+// non GUI features selection
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
+// integer which is implemented in terms of native 64 bit integers if any or
+// uses emulation otherwise.
+//
+// This class is required by wxDateTime and so you should enable it if you want
+// to use wxDateTime. For most modern platforms, it will use the native 64 bit
+// integers in which case (almost) all of its functions are inline and it
+// almost does not take any space, so there should be no reason to switch it
+// off.
+//
+// Recommended setting: 1
+#define wxUSE_LONGLONG      1
+
+
+// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
+// allow to manipulate dates, times and time intervals. wxDateTime replaces the
+// old wxTime and wxDate classes which are still provided for backwards
+// compatibility (and implemented in terms of wxDateTime).
+//
+// Note that this class is relatively new and is still officially in alpha
+// stage because some features are not yet (fully) implemented. It is already
+// quite useful though and should only be disabled if you are aiming at
+// absolutely minimal version of the library.
+//
+// Requires: wxUSE_LONGLONG
+//
+// Recommended setting: 1
+#define wxUSE_TIMEDATE      1
+
+// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
+// which allow the application to store its settings in the persistent
+// storage. Setting this to 1 will also enable on-demand creation of the
+// global config object in wxApp.
+//
+// See also wxUSE_CONFIG_NATIVE below.
+//
+// Recommended setting: 1

 #define wxUSE_CONFIG           1
 #define wxUSE_CONFIG           1

-                                // Use wxConfig, with CreateConfig in wxApp

 
 

-#define WXWIN_COMPATIBILITY  0
-                                // Compatibility with 1.66 API.
-                                // Level 0: no backward compatibility, all new features
-                                // Level 1: wxDC, OnSize (etc.) compatibility, but
-                                //          some new features such as event tables
+// ----------------------------------------------------------------------------
+// Optional controls
+// ----------------------------------------------------------------------------
+
+// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
+// classes at all. Otherwise, use the native toolbar class unless
+// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
+// supports some features which might not be supported by the native wxToolBar
+// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
+//
+// Default is 1 for all settings.
+//
+// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
+// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
+#define wxUSE_TOOLBAR 1
+#define wxUSE_TOOLBAR_NATIVE 1
+#define wxUSE_TOOLBAR_SIMPLE 0
+
+// wxNotebook is a control with several "tabs" located on one of its sides. It
+// may be used ot logically organise the data presented to the user instead of
+// putting everything in one huge dialog. It replaces wxTabControl and related
+// classes of wxWin 1.6x.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTEBOOK 1
+
+
+// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
+// 1 and not compiled into the library otherwise.
+//
+// Default is 1 for everything.
+//
+// Recommended setting: 1 (library might fail to compile for some combinations
+// of disabled controls) 
+#define wxUSE_COMBOBOX     1
+#define wxUSE_CHOICE       1
+#define wxUSE_RADIOBTN     1
+#define wxUSE_RADIOBOX     1
+#define wxUSE_SCROLLBAR    1
+#define wxUSE_CHECKBOX     1
+#define wxUSE_LISTBOX      1
+#define wxUSE_SPINBTN      1
+#define wxUSE_SPINCTRL     1
+#define wxUSE_STATLINE     1
+#define wxUSE_CHECKLISTBOX 1
+#define wxUSE_CHOICE       1
+#define wxUSE_CARET        1
+#define wxUSE_SLIDER       1
+
+// ----------------------------------------------------------------------------
+// Postscript support settings
+// ----------------------------------------------------------------------------
+
+

 #define wxUSE_POSTSCRIPT  0
                                // 0 for no PostScript device context
 #define wxUSE_AFM_FOR_POSTSCRIPT 0
 #define wxUSE_POSTSCRIPT  0
                                // 0 for no PostScript device context
 #define wxUSE_AFM_FOR_POSTSCRIPT 0


@@ -138,7 +247,7 @@
                                   // since you may well need to output
                                   // an error log in a production
                                   // version (or non-debugging beta)
                                   // since you may well need to output
                                   // an error log in a production
                                   // version (or non-debugging beta)

-#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
+#define wxUSE_GLOBAL_MEMORY_OPERATORS 0

                                   // In debug mode, cause new and delete to be redefined globally.
                                   // If this causes problems (e.g. link errors), set this to 0.
 
                                   // In debug mode, cause new and delete to be redefined globally.
                                   // If this causes problems (e.g. link errors), set this to 0.
 


@@ -153,17 +262,27 @@
                                   // Set this to 0 if your compiler can't cope
                                   // with omission of prototype parameters.
 
                                   // Set this to 0 if your compiler can't cope
                                   // with omission of prototype parameters.
 

-#define wxUSE_ODBC                   1
-                                    // Define 1 to use ODBC classes
+#define wxUSE_ODBC 1
+                                  // Define 1 to use ODBC classes
+

 
 

+#define wxODBC_FWD_ONLY_CURSORS 1
+                                  // For backward compatibility reasons, this parameter now only
+                                  // controls the default scrolling method used by cursors.  This
+                                  // default behavior can be overriden by setting the second param
+                                  // of wxDB::GetDbConnection() to indicate whether the connection
+                                  // (and any wxTable()s that use the connection) should support
+                                  // forward only scrolling of cursors, or both forward and backward
+                                  // Support for backward scrolling cursors is dependent on the
+                                  // data source as well as the ODBC driver being used.

 
 

-#define wxODBC_FWD_ONLY_CURSORS   1
-                                  // Some databases/ODBC drivers only allow forward scrolling cursors.
-                                  // Unless you specifically want to use backward scrolling
-                                  // cursors, and you know that all of the databases/ODBC drivers
-                                  // that you will use these odbc classes with allow backward 
-                                  // scrolling cursors, this setting should remain set to 1
-                                  // for maximum database/driver compatibilty
+#define wxODBC_BACKWARD_COMPATABILITY 0
+                                  // Default is 0.  Set to 1 to use the deprecated classes, enum
+                                  // types, function, member variables.  With a setting of 1, full
+                                  // backward compatability with the 2.0.x release is possible.
+                                  // It is STRONGLY recommended that this be set to 0, as 
+                                  // future development will be done only on the non-deprecated
+                                  // functions/classes/member variables/etc.

 
 
 
 
 
 


@@ -187,7 +306,7 @@
                                   // if enabled, compiles built-in OS independent wxConfig
                                   // class and it's file (any platform) and registry (Win)
                                   // based implementations
                                   // if enabled, compiles built-in OS independent wxConfig
                                   // class and it's file (any platform) and registry (Win)
                                   // based implementations

-#define wxUSE_THREADS       1
+#define wxUSE_THREADS       0

                                   // support for multithreaded applications: if
                                   // 1, compile in thread classes (thread.h)
                                   // and make the library thread safe
                                   // support for multithreaded applications: if
                                   // 1, compile in thread classes (thread.h)
                                   // and make the library thread safe


@@ -205,7 +324,7 @@
 #define wxUSE_TOOLTIPS      1
                                   // Define to use wxToolTip class and
                                   // wxWindow::SetToolTip() method
 #define wxUSE_TOOLTIPS      1
                                   // Define to use wxToolTip class and
                                   // wxWindow::SetToolTip() method

-#define wxUSE_SOCKETS       1 // 0
+#define wxUSE_SOCKETS       0 // 0

                                   // Set to 1 to use socket classes
 #define wxUSE_HTML          1 // 0
                                   // Set to 1 to use wxHTML sub-library
                                   // Set to 1 to use socket classes
 #define wxUSE_HTML          1 // 0
                                   // Set to 1 to use wxHTML sub-library


@@ -306,7 +425,7 @@
 #define wxUSE_PENWINDOWS 0
                                     // Set to 1 to use PenWindows
 
 #define wxUSE_PENWINDOWS 0
                                     // Set to 1 to use PenWindows
 

-#define wxUSE_OWNER_DRAWN             1
+#define wxUSE_OWNER_DRAWN             0

                                     // Owner-drawn menus and listboxes
 
 #define wxUSE_NATIVE_STATUSBAR        1
                                     // Owner-drawn menus and listboxes
 
 #define wxUSE_NATIVE_STATUSBAR        1