{\bf wxSOCKET\_OUTPUT} event.
The {\bf wxSOCKET\_CONNECTION} event is issued when a delayed connection
-request completes succesfully (client) or when a new connection arrives
+request completes successfully (client) or when a new connection arrives
at the incoming queue (server).
The {\bf wxSOCKET\_LOST} event is issued when a close indication is
\wxheading{Return value}
-Always TRUE.
+Always true.
%
% Discard
Use \helpref{LastCount}{wxsocketbaselastcount} to verify the number of bytes actually discarded.
-If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return false.
%
% Error
\constfunc{bool}{Error}{\void}
-Returns TRUE if an error occurred in the last IO operation.
+Returns true if an error occurred in the last IO operation.
Use this function to check for an error condition after one of the
following calls: Discard, Peek, Read, ReadMsg, Unread, Write, WriteMsg.
\wxheading{Return value}
-TRUE if no error happened, FALSE otherwise.
+true if no error happened, false otherwise.
%
% GetFlags
\wxheading{Return value}
-TRUE if no error happened, FALSE otherwise.
+true if no error happened, false otherwise.
%
% InterruptWait
\constfunc{bool}{IsConnected}{\void}
-Returns TRUE if the socket is connected.
+Returns true if the socket is connected.
%
% IsData
%
\constfunc{bool}{IsDisconnected}{\void}
-Returns TRUE if the socket is not connected.
+Returns true if the socket is not connected.
\membersection{wxSocketBase::LastCount}\label{wxsocketbaselastcount}
but it should not be used to determine if an error has occurred (this
is because successful operations do not change the LastError value).
Use \helpref{Error}{wxsocketbaseerror} first, in order to determine
-if the last IO call failed. If this returns TRUE, use LastError
+if the last IO call failed. If this returns true, use LastError
to discover the cause of the error.
%
\func{void}{Notify}{\param{bool}{ notify}}
According to the {\it notify} value, this function enables
-or disables socket events. If {\it notify} is TRUE, the events
+or disables socket events. If {\it notify} is true, the events
configured with \helpref{SetNotify}{wxsocketbasesetnotify} will
-be sent to the application. If {\it notify} is FALSE; no events
+be sent to the application. If {\it notify} is false; no events
will be sent.
%
\constfunc{bool}{Ok}{\void}
-Returns TRUE if the socket is initialized and ready and FALSE in other
+Returns true if the socket is initialized and ready and false in other
cases.
\wxheading{Remark/Warning}
-For \helpref{wxSocketClient}{wxsocketclient}, Ok won't return TRUE unless
+For \helpref{wxSocketClient}{wxsocketclient}, Ok won't return true unless
the client is connected to a server.
-For \helpref{wxSocketServer}{wxsocketserver}, Ok will return TRUE if the
+For \helpref{wxSocketServer}{wxsocketserver}, Ok will return true if the
server could bind to the specified address and is already listening for
new connections.
\func{void}{SetFlags}{\param{wxSocketFlags}{ flags}}
Use SetFlags to customize IO operation for this socket.
-The {\it flags} parameter may be a combination of flags ORed toghether.
+The {\it flags} parameter may be a combination of flags ORed together.
The following flags can be used:
\twocolwidtha{7cm}
\func{void}{SetNotify}{\param{wxSocketEventFlags}{ flags}}
SetNotify specifies which socket events are to be sent to the event handler.
-The {\it flags} parameter may be combination of flags ORed toghether. The
+The {\it flags} parameter may be combination of flags ORed together. The
following flags can be used:
\twocolwidtha{7cm}
\begin{verbatim}
sock.SetNotify(wxSOCKET_INPUT_FLAG | wxSOCKET_LOST_FLAG);
- sock.Notify(TRUE);
+ sock.Notify(true);
\end{verbatim}
In this example, the user will be notified about incoming socket data and
If you use \helpref{LastCount}{wxsocketbaselastcount}, it will always return {\it nbytes}.
-If you use \helpref{Error}{wxsocketbaseerror}, it will always return FALSE.
+If you use \helpref{Error}{wxsocketbaseerror}, it will always return false.
\wxheading{Parameters}
\func{bool}{Wait}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-This function waits until any of the following conditions is TRUE:
+This function waits until any of the following conditions is true:
\begin{itemize}
\item The socket becomes readable.
\wxheading{Return value}
-Returns TRUE when any of the above conditions is satisfied,
-FALSE if the timeout was reached.
+Returns true when any of the above conditions is satisfied,
+false if the timeout was reached.
\wxheading{See also}
\wxheading{Return value}
-Returns TRUE if the connection was lost, FALSE if the timeout was reached.
+Returns true if the connection was lost, false if the timeout was reached.
\wxheading{See also}
\wxheading{Return value}
-Returns TRUE if the socket becomes readable, FALSE on timeout.
+Returns true if the socket becomes readable, false on timeout.
\wxheading{See also}
\wxheading{Return value}
-Returns TRUE if the socket becomes writable, FALSE on timeout.
+Returns true if the socket becomes writable, false on timeout.
\wxheading{See also}
%
\membersection{wxSocketClient::Connect}\label{wxsocketclientconnect}
-\func{bool}{Connect}{\param{wxSockAddress\&}{ address}, \param{bool}{ wait = TRUE}}
+\func{bool}{Connect}{\param{wxSockAddress\&}{ address}, \param{bool}{ wait = true}}
Connects to a server using the specified address.
-If {\it wait} is TRUE, Connect will wait until the connection
+If {\it wait} is true, Connect will wait until the connection
completes. {\bf Warning:} This will block the GUI.
-If {\it wait} is FALSE, Connect will try to establish the connection and
+If {\it wait} is false, Connect will try to establish the connection and
return immediately, without blocking the GUI. When used this way, even if
-Connect returns FALSE, the connection request can be completed later.
+Connect returns false, the connection request can be completed later.
To detect this, use \helpref{WaitOnConnect}{wxsocketclientwaitonconnect},
or catch {\bf wxSOCKET\_CONNECTION} events (for successful establishment)
and {\bf wxSOCKET\_LOST} events (for connection failure).
\docparam{address}{Address of the server.}
-\docparam{wait}{If TRUE, waits for the connection to complete.}
+\docparam{wait}{If true, waits for the connection to complete.}
\wxheading{Return value}
-Returns TRUE if the connection is established and no error occurs.
+Returns true if the connection is established and no error occurs.
-If {\it wait} was TRUE, and Connect returns FALSE, an error occurred
+If {\it wait} was true, and Connect returns false, an error occurred
and the connection failed.
-If {\it wait} was FALSE, and Connect returns FALSE, you should still
+If {\it wait} was false, and Connect returns false, you should still
be prepared to handle the completion of this connection request, either
with \helpref{WaitOnConnect}{wxsocketclientwaitonconnect} or by
watching {\bf wxSOCKET\_CONNECTION} and {\bf wxSOCKET\_LOST} events.
Wait until a connection request completes, or until the specified timeout
elapses. Use this function after issuing a call
-to \helpref{Connect}{wxsocketclientconnect} with {\it wait} set to FALSE.
+to \helpref{Connect}{wxsocketclientconnect} with {\it wait} set to false.
\wxheading{Parameters}
\wxheading{Return value}
-WaitOnConnect returns TRUE if the connection request completes. This
-does not necessarily mean that the connection was succesfully established;
+WaitOnConnect returns true if the connection request completes. This
+does not necessarily mean that the connection was successfully established;
it might also happen that the connection was refused by the peer. Use
\helpref{IsConnected}{wxsocketbaseisconnected} to distinguish between
these two situations.
-If the timeout elapses, WaitOnConnect returns FALSE.
+If the timeout elapses, WaitOnConnect returns false.
These semantics allow code like this:
\begin{verbatim}
// Issue the connection request
-client->Connect(addr, FALSE);
+client->Connect(addr, false);
// Wait until the request completes or until we decide to give up
-bool waitmore = TRUE;
+bool waitmore = true;
while ( !client->WaitOnConnect(seconds, millis) && waitmore )
{
// possibly give some feedback to the user,
Returns the socket event type.
-% ---------------------------------------------------------------------------
-% CLASS: wxSocketServer
-% ---------------------------------------------------------------------------
-\section{\class{wxSocketServer}}\label{wxsocketserver}
-
-\wxheading{Derived from}
-
-\helpref{wxSocketBase}{wxsocketbase}
-
-\wxheading{Include files}
-
-<wx/socket.h>
-
-% ---------------------------------------------------------------------------
-% Members
-% ---------------------------------------------------------------------------
-\latexignore{\rtfignore{\wxheading{Members}}}
-
-%
-% wxSocketServer
-%
-\membersection{wxSocketServer::wxSocketServer}\label{wxsocketserverconstr}
-
-\func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSocketFlags}{ flags = wxSOCKET\_NONE}}
-
-Constructs a new server and tries to bind to the specified {\it address}.
-Before trying to accept new connections, test whether it succeeded with
-\helpref{wxSocketBase::Ok}{wxsocketbaseok}.
-
-\wxheading{Parameters}
-
-\docparam{address}{Specifies the local address for the server (e.g. port number).}
-
-\docparam{flags}{Socket flags (See \helpref{wxSocketBase::SetFlags}{wxsocketbasesetflags})}
-
-%
-% ~wxSocketServer
-%
-\membersection{wxSocketServer::\destruct{wxSocketServer}}
-
-\func{}{\destruct{wxSocketServer}}{\void}
-
-Destructor (it doesn't close the accepted connections).
-
-%
-% Accept
-%
-\membersection{wxSocketServer::Accept}\label{wxsocketserveraccept}
-
-\func{wxSocketBase *}{Accept}{\param{bool}{ wait = TRUE}}
-
-Accepts an incoming connection request, and creates a new
-\helpref{wxSocketBase}{wxsocketbase} object which represents
-the server-side of the connection.
-
-If {\it wait} is TRUE and there are no pending connections to be
-accepted, it will wait for the next incoming connection to
-arrive. {\bf Warning:} This will block the GUI.
-
-If {\it wait} is FALSE, it will try to accept a pending connection
-if there is one, but it will always return immediately without blocking
-the GUI. If you want to use Accept in this way, you can either check for
-incoming connections with \helpref{WaitForAccept}{wxsocketserverwaitforaccept}
-or catch {\bf wxSOCKET\_CONNECTION} events, then call Accept once you know
-that there is an incoming connection waiting to be accepted.
-
-\wxheading{Return value}
-
-Returns an opened socket connection, or NULL if an error occurred or
-if the {\it wait} parameter was FALSE and there were no pending
-connections.
-
-\wxheading{See also}
-
-\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
-\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
-\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
-\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith}
-
-%
-% AcceptWith
-%
-\membersection{wxSocketServer::AcceptWith}\label{wxsocketserveracceptwith}
-
-\func{bool}{AcceptWith}{\param{wxSocketBase\&}{ socket}, \param{bool}{ wait = TRUE}}
-
-Accept an incoming connection using the specified socket object.
-
-\wxheading{Parameters}
-
-\docparam{socket}{Socket to be initialized}
-
-\wxheading{Return value}
-
-Returns TRUE on success, or FALSE if an error occurred or if the
-{\it wait} parameter was FALSE and there were no pending
-connections.
-
-\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
-\helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify},
-\helpref{wxSocketBase::Notify}{wxsocketbasenotify},
-\helpref{wxSocketServer::Accept}{wxsocketserveraccept}
-
-%
-% WaitForAccept
-%
-\membersection{wxSocketServer::WaitForAccept}\label{wxsocketserverwaitforaccept}
-
-\func{bool}{WaitForAccept}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
-
-This function waits for an incoming connection. Use it if you want to call
-\helpref{Accept}{wxsocketserveraccept} or \helpref{AcceptWith}{wxsocketserveracceptwith}
-with {\it wait} set to FALSE, to detect when an incoming connection is waiting
-to be accepted.
-
-\wxheading{Parameters}
-
-\docparam{seconds}{Number of seconds to wait.
-If -1, it will wait for the default timeout,
-as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
-
-\docparam{millisecond}{Number of milliseconds to wait.}
-
-\wxheading{Return value}
-
-Returns TRUE if an incoming connection arrived, FALSE if the timeout elapsed.
-
-\wxheading{See also}
-
-\helpref{wxSocketServer::Accept}{wxsocketserveraccept},
-\helpref{wxSocketServer::AcceptWith}{wxsocketserveracceptwith},
-\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}
-
projects / wxWidgets.git / blobdiff