+///////////////////////////////////////////////////////////////////////////////
+// Name: wx/setup_inc.h
+// Purpose: setup.h settings
+// Author: Vadim Zeitlin
+// Modified by:
+// Created:
+// RCS-ID: $Id$
+// Copyright: (c) Vadim Zeitlin
+// Licence: wxWindows licence
+///////////////////////////////////////////////////////////////////////////////
// ----------------------------------------------------------------------------
// global settings
// compatibility settings
// ----------------------------------------------------------------------------
-// This setting determines the compatibility with 2.2 API: set it to 1 to
-// enable it but please consider updating your code instead.
+// This setting determines the compatibility with 2.6 API: set it to 0 to
+// flag all cases of using deprecated functions.
//
-// Default is 0
+// Default is 1 but please try building your code with 0 as the default will
+// change to 0 in the next version and the deprecated functions will disappear
+// in the version after it completely.
//
// Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_2 0
+#define WXWIN_COMPATIBILITY_2_6 0
-// This setting determines the compatibility with 2.4 API: set it to 0 to
+// This setting determines the compatibility with 2.8 API: set it to 0 to
// flag all cases of using deprecated functions.
//
// Default is 1 but please try building your code with 0 as the default will
// in the version after it completely.
//
// Recommended setting: 0 (please update your code)
-#define WXWIN_COMPATIBILITY_2_4 1
+#define WXWIN_COMPATIBILITY_2_8 1
-// Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
-// If migrating between versions, your dialogs may seem to shrink.
+// MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
+// default system font is used for wxWindow::GetCharWidth/Height() instead of
+// the current font.
//
-// Default is 1
+// Default is 0
//
-// Recommended setting: 0 (the new calculations are more correct!)
-#define wxDIALOG_UNIT_COMPATIBILITY 1
+// Recommended setting: 0
+#define wxDIALOG_UNIT_COMPATIBILITY 0
// ----------------------------------------------------------------------------
// debugging settings
// ----------------------------------------------------------------------------
+// wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no
+// need to define it here. You may do it for two reasons: either completely
+// disable/compile out the asserts in release version (then do it inside #ifdef
+// NDEBUG) or, on the contrary, enable more asserts, including the usually
+// disabled ones, in the debug build (then do it inside #ifndef NDEBUG)
+//
+// #ifdef NDEBUG
+// #define wxDEBUG_LEVEL 0
+// #else
+// #define wxDEBUG_LEVEL 2
+// #endif
+
+// wxHandleFatalExceptions() may be used to catch the program faults at run
+// time and, instead of terminating the program with a usual GPF message box,
+// call the user-defined wxApp::OnFatalException() function. If you set
+// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
+//
+// This setting is for Win32 only and can only be enabled if your compiler
+// supports Win32 structured exception handling (currently only VC++ does)
+//
+// Default is 1
+//
+// Recommended setting: 1 if your compiler supports it.
+#define wxUSE_ON_FATAL_EXCEPTION 1
+
+// Set this to 1 to be able to generate a human-readable (unlike
+// machine-readable minidump created by wxCrashReport::Generate()) stack back
+// trace when your program crashes using wxStackWalker
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, set to 0 if your programs never crash
+#define wxUSE_STACKWALKER 1
+
+// Set this to 1 to compile in wxDebugReport class which allows you to create
+// and optionally upload to your web site a debug report consisting of back
+// trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
+//
+// Default is 1 if supported by the compiler.
+//
+// Recommended setting: 1, it is compiled into a separate library so there
+// is no overhead if you don't use it
+#define wxUSE_DEBUGREPORT 1
+
// Generic comment about debugging settings: they are very useful if you don't
// use any other memory leak detection tools such as Purify/BoundsChecker, but
// are probably redundant otherwise. Also, Visual C++ CRT has the same features
// may prefer to use it instead of built in memory debugging code because it is
// faster and more fool proof.
//
-// Using VC++ CRT memory debugging is enabled by default in debug mode
-// (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
+// Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG
+// is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
// and if __NO_VC_CRTDBG__ is not defined.
+// The rest of the options in this section are obsolete and not supported,
+// enable them at your own risk.
+
// If 1, enables wxDebugContext, for writing error messages to file, etc. If
// __WXDEBUG__ is not defined, will still use the normal memory operators.
//
// Recommended setting: 0
#define wxUSE_DEBUG_NEW_ALWAYS 0
-// wxHandleFatalExceptions() may be used to catch the program faults at run
-// time and, instead of terminating the program with a usual GPF message box,
-// call the user-defined wxApp::OnFatalException() function. If you set
-// wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
-//
-// This setting is for Win32 only and can only be enabled if your compiler
-// supports Win32 structured exception handling (currently only VC++ does)
-//
-// Default is 1
-//
-// Recommended setting: 1 if your compiler supports it.
-#define wxUSE_ON_FATAL_EXCEPTION 1
-
-// Set this to 1 to be able to generate a human-readable (unlike
-// machine-readable minidumop created by wxCrashReport::Generate()) stack back
-// trace when your program crashes using wxStackWalker
-//
-// Default is 1 if supported by the compiler.
-//
-// Recommended setting: 1, set to 0 if your programs never crash
-#define wxUSE_STACKWALKER 1
// ----------------------------------------------------------------------------
// Unicode support
// ----------------------------------------------------------------------------
-// Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
-// defined as wchar_t, wxString will use Unicode internally. If you set this
-// to 1, you must use wxT() macro for all literal strings in the program.
-//
-// Unicode is currently only fully supported under Windows NT/2000/XP
-// (Windows 9x doesn't support it and the programs compiled in Unicode mode
-// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
-//
-// Default is 0
-//
-// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
+// These settings are obsolete: the library is always built in Unicode mode
+// now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
+// absolutely necessary -- updating it is strongly recommended as the ANSI mode
+// will disappear completely in future wxWidgets releases.
#ifndef wxUSE_UNICODE
- #define wxUSE_UNICODE 0
+ #define wxUSE_UNICODE 1
#endif
-// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
-// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
-// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
-// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
-// that you will have to modify the makefiles to include unicows.lib import
-// library as the first library (see installation instructions in install.txt
-// to learn how to do it when building the library or samples).
-//
-// If your compiler doesn't have unicows.lib, you can get a version of it at
-// http://libunicows.sourceforge.net
-//
-// Default is 0
-//
-// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
-#define wxUSE_UNICODE_MSLU 0
-
-// Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
-// compiling the program in Unicode mode. More precisely, it will be possible
-// to construct wxString from a wide (Unicode) string and convert any wxString
-// to Unicode.
-//
-// Default is 1
-//
-// Recommended setting: 1
+// wxUSE_WCHAR_T is required by wxWidgets now, don't change.
#define wxUSE_WCHAR_T 1
// ----------------------------------------------------------------------------
// Recommended setting: 0 (this is still work in progress...)
#define wxUSE_EXTENDED_RTTI 0
-// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
-// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
-// and for wxHashMap to be implemented with templates.
-//
-// Default is 0
-//
-// Recommended setting: YMMV
-#define wxUSE_STL 0
-
// Support for message/error logging. This includes wxLogXXX() functions and
// wxLog and derived classes. Don't set this to 0 unless you really know what
// you are doing.
//
// Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
// to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
-// build/msw/config.* file this value will have no effectNotice that if
-// wxNO_THREADS is defined, wxUSE_THREADS is automatically reset to 0 in
-// wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
// build/msw/config.* file this value will have no effect.
//
// Default is 1
// Recommended setting: 0 unless you do plan to develop MT applications
#define wxUSE_THREADS 1
-// If enabled (1), compiles wxWidgets streams classes
+// If enabled, compiles wxWidgets streams classes
+//
+// wx stream classes are used for image IO, process IO redirection, network
+// protocols implementation and much more and so disabling this results in a
+// lot of other functionality being lost.
+//
+// Default is 1
+//
+// Recommended setting: 1 as setting it to 0 disables many other things
#define wxUSE_STREAMS 1
-// Use standard C++ streams if 1. If 0, use wxWin streams implementation.
-#define wxUSE_STD_IOSTREAM 0
+// Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
+// Note that if the system's implementation does not support positional
+// parameters, setting this to 1 forces the use of the wxWidgets implementation
+// of wxVsnprintf. The standard vsnprintf() supports positional parameters on
+// many Unix systems but usually doesn't under Windows.
+//
+// Positional parameters are very useful when translating a program since using
+// them in formatting strings allow translators to correctly reorder the
+// translated sentences.
+//
+// Default is 1
+//
+// Recommended setting: 1 if you want to support multiple languages
+#define wxUSE_PRINTF_POS_PARAMS 1
+
+
+// ----------------------------------------------------------------------------
+// Interoperability with the standard library.
+// ----------------------------------------------------------------------------
+
+// Set wxUSE_STL to 1 to enable maximal interoperability with the standard
+// library, even at the cost of backwards compatibility.
+//
+// Default is 0
+//
+// Recommended setting: 0 as the options below already provide a relatively
+// good level of interoperability and changing this option arguably isn't worth
+// diverging from the official builds of the library.
+#define wxUSE_STL 0
+
+// This is not a real option but is used as the default value for
+// wxUSE_STD_IOSTREAM, wxUSE_STD_STRING and wxUSE_STD_CONTAINERS.
+//
+// Currently the Digital Mars and Watcom compilers come without standard C++
+// library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
+// them (e.g. from STLPort).
+//
+// VC++ 5.0 does include standard C++ library headers, however they produce
+// many warnings that can't be turned off when compiled at warning level 4.
+#if defined(__DMC__) || defined(__WATCOMC__) \
+ || (defined(_MSC_VER) && _MSC_VER < 1200)
+ #define wxUSE_STD_DEFAULT 0
+#else
+ #define wxUSE_STD_DEFAULT 1
+#endif
+
+// Use standard C++ containers to implement wxVector<>, wxStack<>, wxDList<>
+// and wxHashXXX<> classes. If disabled, wxWidgets own (mostly compatible but
+// usually more limited) implementations are used which allows to avoid the
+// dependency on the C++ run-time library.
+//
+// Notice that the compilers mentioned in wxUSE_STD_DEFAULT comment above don't
+// support using standard containers and that VC6 needs non-default options for
+// such build to avoid getting "fatal error C1076: compiler limit : internal
+// heap limit reached; use /Zm to specify a higher limit" in its own standard
+// headers, so you need to ensure you do increase the heap size before enabling
+// this option for this compiler.
+//
+// Default is 0 for compatibility reasons.
+//
+// Recommended setting: 1 unless compatibility with the official wxWidgets
+// build and/or the existing code is a concern.
+#define wxUSE_STD_CONTAINERS 0
+
+// Use standard C++ streams if 1 instead of wx streams in some places. If
+// disabled, wx streams are used everywhere and wxWidgets doesn't depend on the
+// standard streams library.
+//
+// Notice that enabling this does not replace wx streams with std streams
+// everywhere, in a lot of places wx streams are used no matter what.
+//
+// Default is 1 if compiler supports it.
+//
+// Recommended setting: 1 if you use the standard streams anyhow and so
+// dependency on the standard streams library is not a
+// problem
+#define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
+
+// Enable minimal interoperability with the standard C++ string class if 1.
+// "Minimal" means that wxString can be constructed from std::string or
+// std::wstring but can't be implicitly converted to them. You need to enable
+// the option below for the latter.
+//
+// Default is 1 for most compilers.
+//
+// Recommended setting: 1 unless you want to ensure your program doesn't use
+// the standard C++ library at all.
+#define wxUSE_STD_STRING wxUSE_STD_DEFAULT
+
+// Make wxString as much interchangeable with std::[w]string as possible, in
+// particular allow implicit conversion of wxString to either of these classes.
+// This comes at a price (or a benefit, depending on your point of view) of not
+// allowing implicit conversion to "const char *" and "const wchar_t *".
+//
+// Because a lot of existing code relies on these conversions, this option is
+// disabled by default but can be enabled for your build if you don't care
+// about compatibility.
+//
+// Default is 0 if wxUSE_STL has its default value or 1 if it is enabled.
+//
+// Recommended setting: 0 to remain compatible with the official builds of
+// wxWidgets.
+#define wxUSE_STD_STRING_CONV_IN_WXSTRING wxUSE_STL
+
+// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
+// them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
+//
+// Note that newer compilers (including VC++ 7.1 and later) don't support
+// wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
+//
+// Default is 0.
+//
+// Recommended setting: 0, only set to 1 if you use a really old compiler
+#define wxUSE_IOSTREAMH 0
+
// ----------------------------------------------------------------------------
// non GUI features selection
// Recommended setting: 1
#define wxUSE_LONGLONG 1
+// Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
+// storing binary data in wxConfig on most platforms.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_BASE64 1
+
+// Set this to 1 to be able to use wxEventLoop even in console applications
+// (i.e. using base library only, without GUI). This is mostly useful for
+// processing socket events but is also necessary to use timers in console
+// applications
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely disabled if you don't use it)
+#define wxUSE_CONSOLE_EVENTLOOP 1
+
// Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
// POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
//
// Recommended setting: 1 (but may be safely disabled if you don't use it)
#define wxUSE_FSVOLUME 1
+// Use wxStandardPaths class which allows to retrieve some standard locations
+// in the file system
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be disabled to save space, but not much)
+#define wxUSE_STDPATHS 1
+
// use wxTextBuffer class: required by wxTextFile
#define wxUSE_TEXTBUFFER 1
// i18n support: _() macro, wxLocale class. Requires wxTextFile.
#define wxUSE_INTL 1
+// Provide wxFoo_l() functions similar to standard foo() functions but taking
+// an extra locale parameter.
+//
+// Notice that this is fully implemented only for the systems providing POSIX
+// xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
+// almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
+// only work for the current user locale and "C" locale. You can use
+// wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
+//
+// Default is 1
+//
+// Recommended setting: 1 but may be disabled if you are writing programs
+// running only in C locale anyhow
+#define wxUSE_XLOCALE 1
+
// Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// Recommended setting: 1 (needed by wxSocket)
#define wxUSE_STOPWATCH 1
+// Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FSWATCHER 1
+
// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
// which allow the application to store its settings in the persistent
// storage. Setting this to 1 will also enable on-demand creation of the
// Set to 1 to use socket classes
#define wxUSE_SOCKETS 1
+// Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
+//
+// Notice that currently setting this option under Windows will result in
+// programs which can only run on recent OS versions (with ws2_32.dll
+// installed) which is why it is disabled by default.
+//
+// Default is 1.
+//
+// Recommended setting: 1 if you need IPv6 support
+#define wxUSE_IPV6 0
+
// Set to 1 to enable virtual file systems (required by wxHTML)
#define wxUSE_FILESYSTEM 1
// Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_ZIP 1
+// Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
+#define wxUSE_FS_ARCHIVE 1
+
// Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
#define wxUSE_FS_INET 1
// Set to 1 to compile wxZipInput/OutputStream classes.
#define wxUSE_ZIPSTREAM 1
+// Set to 1 to compile wxTarInput/OutputStream classes.
+#define wxUSE_TARSTREAM 1
+
// Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
// wxUSE_LIBPNG
#define wxUSE_ZLIB 1
// Joystick support class
#define wxUSE_JOYSTICK 1
+// wxFontEnumerator class
+#define wxUSE_FONTENUM 1
+
// wxFontMapper class
#define wxUSE_FONTMAP 1
// This code is experimental and subject to change.
#define wxUSE_URL_NATIVE 0
+// Support for wxVariant class used in several places throughout the library,
+// notably in wxDataViewCtrl API.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size as much as
+// possible in which case setting this to 0 can gain up to 100KB.
+#define wxUSE_VARIANT 1
+
+// Support for wxAny class, the successor for wxVariant.
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you want to reduce the library size by a small amount,
+// or your compiler cannot for some reason cope with complexity of templates used.
+#define wxUSE_ANY 1
+
// Support for regular expression matching via wxRegEx class: enable this to
// use POSIX regular expressions in your code. You need to compile regex
// library from src/regex to use it under Windows.
//
// Default is 1.
//
-// Recommended setting: 1
+// Recommended setting: 1
#define wxUSE_MEDIACTRL 1
-// Use QuickTime
+// Use wxWidget's XRC XML-based resource system. Recommended.
//
-// Default is 0
+// Default is 1
//
-// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
-#define wxUSE_QUICKTIME 0
+// Recommended setting: 1 (requires wxUSE_XML)
+#define wxUSE_XRC 1
-// Use DirectShow (requires linkage to strmiids.lib)
+// XML parsing classes. Note that their API will change in the future, so
+// using wxXmlDocument and wxXmlNode in your app is not recommended.
//
-// Default is 0
+// Default is the same as wxUSE_XRC, i.e. 1 by default.
//
-// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
-#define wxUSE_DIRECTSHOW 0
+// Recommended setting: 1 (required by XRC)
+#define wxUSE_XML wxUSE_XRC
-// Use GStreamer for Unix (req a lot of dependancies)
+// Use wxWidget's AUI docking system
//
-// Default is 0
+// Default is 1
//
-// Recommended setting: 1 (wxMediaCtrl won't work by default without it)
-#define wxUSE_GSTREAMER 0
+// Recommended setting: 1
+#define wxUSE_AUI 1
-// Use wxWidget's XRC XML-based resource system. Recommended.
+// Use wxWidget's Ribbon classes for interfaces
//
// Default is 1
//
-// Recommended setting: 1 (requires wxUSE_XML)
-#define wxUSE_XRC 1
+// Recommended setting: 1
+#define wxUSE_RIBBON 1
-// XML parsing classes. Note that their API will change in the future, so
-// using wxXmlDocument and wxXmlNode in your app is not recommended.
+// Use wxPropertyGrid.
//
// Default is 1
//
-// Recommended setting: 1 (required by XRC)
-#if wxUSE_XRC
-# define wxUSE_XML 1
+// Recommended setting: 1
+#define wxUSE_PROPGRID 1
+
+// Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_STC 1
+
+// Use wxWidget's web viewing classes
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_WEBVIEW 1
+
+// Use the IE wxWebView backend
+//
+// Default is 1 on MSW
+//
+// Recommended setting: 1
+#ifdef __WXMSW__
+#define wxUSE_WEBVIEW_IE 1
+#else
+#define wxUSE_WEBVIEW_IE 0
+#endif
+
+// Use the WebKit wxWebView backend
+//
+// Default is 1 on GTK and OSX
+//
+// Recommended setting: 1
+#if defined(__WXGTK__) || defined(__WXOSX__)
+#define wxUSE_WEBVIEW_WEBKIT 1
+#else
+#define wxUSE_WEBVIEW_WEBKIT 0
+#endif
+
+// Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
+// 2D drawing API. (Still somewhat experimental)
+//
+// Please note that on Windows gdiplus.dll is loaded dynamically which means
+// that nothing special needs to be done as long as you don't use
+// wxGraphicsContext at all or only use it on XP and later systems but you
+// still do need to distribute it yourself for an application using
+// wxGraphicsContext to be runnable on pre-XP systems.
+//
+// Default is 1 except if you're using a non-Microsoft compiler under Windows
+// as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g.
+// mingw32) you may need to install the headers (and just the headers)
+// yourself. If you do, change the setting below manually.
+//
+// Recommended setting: 1 if supported by the compilation environment
+
+// notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is
+// included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined
+#ifdef _MSC_VER
+# if _MSC_VER >= 1310
+ // MSVC7.1+ comes with new enough Platform SDK, enable
+ // wxGraphicsContext support for it
+# define wxUSE_GRAPHICS_CONTEXT 1
+# else
+ // MSVC 6 didn't include GDI+ headers so disable by default, enable it
+ // here if you use MSVC 6 with a newer SDK
+# define wxUSE_GRAPHICS_CONTEXT 0
+# endif
#else
-# define wxUSE_XML 0
+ // Disable support for other Windows compilers, enable it if your compiler
+ // comes with new enough SDK or you installed the headers manually.
+ //
+ // Notice that this will be set by configure under non-Windows platforms
+ // anyhow so the value there is not important.
+# define wxUSE_GRAPHICS_CONTEXT 0
#endif
+// Enable wxGraphicsContext implementation using Cairo library.
+//
+// This is not needed under Windows and detected automatically by configure
+// under other systems, however you may set this to 1 manually if you installed
+// Cairo under Windows yourself and prefer to use it instead the native GDI+
+// implementation.
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_CAIRO 0
+
+
// ----------------------------------------------------------------------------
// Individual GUI controls
// ----------------------------------------------------------------------------
// Recommended setting: 1 (don't change except for very special programs)
#define wxUSE_CONTROLS 1
+// Support markup in control labels, i.e. provide wxControl::SetLabelMarkup().
+// Currently markup is supported only by a few controls and only some ports but
+// their number will increase with time.
+//
+// Default is 1
+//
+// Recommended setting: 1 (may be set to 0 if you want to save on code size)
+#define wxUSE_MARKUP 1
+
// wxPopupWindow class is a top level transient window. It is currently used
// to implement wxTipWindow
//
// Default is 1
//
// Recommended setting: 1
-#define wxUSE_BUTTON 1 // wxButton
-#define wxUSE_BMPBUTTON 1 // wxBitmapButton
-#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
-#define wxUSE_CHECKBOX 1 // wxCheckBox
-#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
-#define wxUSE_CHOICE 1 // wxChoice
-#define wxUSE_COMBOBOX 1 // wxComboBox
-#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
-#define wxUSE_GAUGE 1 // wxGauge
-#define wxUSE_LISTBOX 1 // wxListBox
-#define wxUSE_LISTCTRL 1 // wxListCtrl
-#define wxUSE_RADIOBOX 1 // wxRadioBox
-#define wxUSE_RADIOBTN 1 // wxRadioButton
-#define wxUSE_SCROLLBAR 1 // wxScrollBar
-#define wxUSE_SLIDER 1 // wxSlider
-#define wxUSE_SPINBTN 1 // wxSpinButton
-#define wxUSE_SPINCTRL 1 // wxSpinCtrl
-#define wxUSE_STATBOX 1 // wxStaticBox
-#define wxUSE_STATLINE 1 // wxStaticLine
-#define wxUSE_STATTEXT 1 // wxStaticText
-#define wxUSE_STATBMP 1 // wxStaticBitmap
-#define wxUSE_TEXTCTRL 1 // wxTextCtrl
-#define wxUSE_TOGGLEBTN 1 // requires wxButton
-#define wxUSE_TREECTRL 1 // wxTreeCtrl
+#define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
+#define wxUSE_BANNERWINDOW 1 // wxBannerWindow
+#define wxUSE_BUTTON 1 // wxButton
+#define wxUSE_BMPBUTTON 1 // wxBitmapButton
+#define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
+#define wxUSE_CHECKBOX 1 // wxCheckBox
+#define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
+#define wxUSE_CHOICE 1 // wxChoice
+#define wxUSE_COLLPANE 1 // wxCollapsiblePane
+#define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
+#define wxUSE_COMBOBOX 1 // wxComboBox
+#define wxUSE_COMMANDLINKBUTTON 1 // wxCommandLinkButton
+#define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
+#define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
+#define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
+#define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
+#define wxUSE_FILECTRL 1 // wxFileCtrl
+#define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
+#define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
+#define wxUSE_GAUGE 1 // wxGauge
+#define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
+#define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
+#define wxUSE_LISTBOX 1 // wxListBox
+#define wxUSE_LISTCTRL 1 // wxListCtrl
+#define wxUSE_RADIOBOX 1 // wxRadioBox
+#define wxUSE_RADIOBTN 1 // wxRadioButton
+#define wxUSE_RICHMSGDLG 1 // wxRichMessageDialog
+#define wxUSE_SCROLLBAR 1 // wxScrollBar
+#define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
+#define wxUSE_SLIDER 1 // wxSlider
+#define wxUSE_SPINBTN 1 // wxSpinButton
+#define wxUSE_SPINCTRL 1 // wxSpinCtrl
+#define wxUSE_STATBOX 1 // wxStaticBox
+#define wxUSE_STATLINE 1 // wxStaticLine
+#define wxUSE_STATTEXT 1 // wxStaticText
+#define wxUSE_STATBMP 1 // wxStaticBitmap
+#define wxUSE_TEXTCTRL 1 // wxTextCtrl
+#define wxUSE_TIMEPICKCTRL 1 // wxTimePickerCtrl
+#define wxUSE_TOGGLEBTN 1 // requires wxButton
+#define wxUSE_TREECTRL 1 // wxTreeCtrl
+#define wxUSE_TREELISTCTRL 1 // wxTreeListCtrl
// Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
// below either wxStatusBar95 or a generic wxStatusBar will be used.
// Recommended setting: 1
#define wxUSE_CHOICEBOOK 1
-// wxTabDialog is a generic version of wxNotebook but it is incompatible with
-// the new class. It shouldn't be used in new code.
+// wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
+// the tabs
//
-// Default is 0.
+// Default is 1.
//
-// Recommended setting: 0 (use wxNotebook)
-#define wxUSE_TAB_DIALOG 0
+// Recommended setting: 1
+#define wxUSE_TREEBOOK 1
+
+// wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
+// tabs
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_TOOLBOOK 1
+
+// wxTaskBarIcon is a small notification icon shown in the system toolbar or
+// dock.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be set to 0 if you don't need it)
+#define wxUSE_TASKBARICON 1
// wxGrid class
//
// Recommended setting: 1 (it doesn't cost almost anything)
#define wxUSE_MINIFRAME 1
+// wxComboCtrl and related classes: combobox with custom popup window and
+// not necessarily a listbox.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
+// it used by wxComboBox
+#define wxUSE_COMBOCTRL 1
+
+// wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
+// items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0, except where it is
+// needed as a base class for generic wxBitmapComboBox.
+#define wxUSE_ODCOMBOBOX 1
+
+// wxBitmapComboBox is a combobox that can have images in front of text items.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0
+#define wxUSE_BITMAPCOMBOBOX 1
+
+// wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
+// up and down in it. It is also used as part of wxRearrangeDialog.
+//
+// Default is 1.
+//
+// Recommended setting: 1 but can be safely set to 0 (currently used only by
+// wxHeaderCtrl)
+#define wxUSE_REARRANGECTRL 1
+
// ----------------------------------------------------------------------------
// Miscellaneous GUI stuff
// ----------------------------------------------------------------------------
// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1
+// Use the standard art provider. The icons returned by this provider are
+// embedded into the library as XPMs so disabling it reduces the library size
+// somewhat but this should only be done if you use your own custom art
+// provider returning the icons or never use any icons not provided by the
+// native art provider (which might not be implemented at all for some
+// platforms) or by the Tango icons provider (if it's not itself disabled
+// below).
+//
+// Default is 1.
+//
+// Recommended setting: 1 unless you use your own custom art provider.
+#define wxUSE_ARTPROVIDER_STD 1
+
+// Use art provider providing Tango icons: this art provider has higher quality
+// icons than the default ones using smaller size XPM icons without
+// transparency but the embedded PNG icons add to the library size.
+//
+// Default is 1 under non-GTK ports. Under wxGTK the native art provider using
+// the GTK+ stock icons replaces it so it is normally not necessary.
+//
+// Recommended setting: 1 but can be turned off to reduce the library size.
+#define wxUSE_ARTPROVIDER_TANGO 1
+
// Hotkey support (currently Windows only)
#define wxUSE_HOTKEY 1
#define wxUSE_CARET 1
// Use wxDisplay class: it allows enumerating all displays on a system and
-// working with them.
+// their geometries as well as finding the display on which the given point or
+// window lies.
//
-// Default is 0 because it isn't yet implemented on all platforms
+// Default is 1.
//
// Recommended setting: 1 if you need it, can be safely set to 0 otherwise
-#define wxUSE_DISPLAY 0
+#define wxUSE_DISPLAY 1
// Miscellaneous geometry code: needed for Canvas library
#define wxUSE_GEOMETRY 1
// enumerated above, then this class is mostly useless too)
#define wxUSE_IMAGLIST 1
+// Use wxInfoBar class.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be disabled without problems as nothing
+// depends on it)
+#define wxUSE_INFOBAR 1
+
// Use wxMenu, wxMenuBar, wxMenuItem.
//
// Default is 1.
// Recommended setting: 1 (can't be disabled under MSW)
#define wxUSE_MENUS 1
+// Use wxNotificationMessage.
+//
+// wxNotificationMessage allows to show non-intrusive messages to the user
+// using balloons, banners, popups or whatever is the appropriate method for
+// the current platform.
+//
+// Default is 1.
+//
+// Recommended setting: 1
+#define wxUSE_NOTIFICATION_MESSAGE 1
+
+// wxRichToolTip is a customizable tooltip class which has more functionality
+// than the stock (but native, unlike this class) wxToolTip.
+//
+// Default is 1.
+//
+// Recommended setting: 1 (but can be safely set to 0 if you don't need it)
+#define wxUSE_RICHTOOLTIP 1
+
// Use wxSashWindow class.
//
// Default is 1.
// wxValidator class and related methods
#define wxUSE_VALIDATORS 1
+// Use reference counted ID management: this means that wxWidgets will track
+// the automatically allocated ids (those used when you use wxID_ANY when
+// creating a window, menu or toolbar item &c) instead of just supposing that
+// the program never runs out of them. This is mostly useful only under wxMSW
+// where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
+// long-running programs can run into problems with ids reuse without this. On
+// the other platforms, where the ids have the full int range, this shouldn't
+// be necessary.
+#ifdef __WXMSW__
+#define wxUSE_AUTOID_MANAGEMENT 1
+#else
+#define wxUSE_AUTOID_MANAGEMENT 0
+#endif
+
// ----------------------------------------------------------------------------
// common dialogs
// ----------------------------------------------------------------------------
// wizards
#define wxUSE_WIZARDDLG 1
+// Compile in wxAboutBox() function showing the standard "About" dialog.
+//
+// Default is 1
+//
+// Recommended setting: 1 but can be set to 0 to save some space if you don't
+// use this function
+#define wxUSE_ABOUTDLG 1
+
+// wxFileHistory class
+//
+// Default is 1
+//
+// Recommended setting: 1
+#define wxUSE_FILE_HISTORY 1
+
// ----------------------------------------------------------------------------
// Metafiles support
// ----------------------------------------------------------------------------
// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
-// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
-// will need to manually add opengl32.lib and glu32.lib to the list of
-// libraries linked with your program if you use OpenGL.
+// set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
+// list of libraries used to link your application (although this is done
+// implicitly for Microsoft Visual C++ users).
//
-// Default is 0.
+// Default is 1 unless the compiler is known to ship without the necessary
+// headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).
//
-// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
-#define wxUSE_GLCANVAS 0
+// Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
+// otherwise.
+#define wxUSE_GLCANVAS 1
+
+// wxRichTextCtrl allows editing of styled text.
+//
+// Default is 1.
+//
+// Recommended setting: 1, set to 0 if you want compile a
+// smaller library.
+#define wxUSE_RICHTEXT 1
// ----------------------------------------------------------------------------
// Data transfer
// ----------------------------------------------------------------------------
// wxSingleInstanceChecker class allows to verify at startup if another program
-// instance is running (it is only available under Win32)
+// instance is running.
//
// Default is 1
//
// 0 for no interprocess comms
#define wxUSE_HELP 1
// 0 for no help facility
+
+// Should we use MS HTML help for wxHelpController? If disabled, neither
+// wxCHMHelpController nor wxBestHelpController are available.
+//
+// Default is 1 under MSW, 0 is always used for the other platforms.
+//
+// Recommended setting: 1, only set to 0 if you have trouble compiling
+// wxCHMHelpController (could be a problem with really ancient compilers)
#define wxUSE_MS_HTML_HELP 1
- // 0 for no MS HTML Help
+
// Use wxHTML-based help controller?
#define wxUSE_WXHTML_HELP 1
-#define wxUSE_RESOURCES 0
- // 0 for no wxGetResource/wxWriteResource
#define wxUSE_CONSTRAINTS 1
// 0 for no window layout constraint system
#define wxUSE_MOUSEWHEEL 1
// Include mouse wheel support
+// Compile wxUIActionSimulator class?
+#define wxUSE_UIACTIONSIMULATOR 1
+
// ----------------------------------------------------------------------------
-// postscript support settings
+// wxDC classes for various output formats
// ----------------------------------------------------------------------------
// Set to 1 for PostScript device context.
// Set to 1 to use font metric files in GetTextExtent
#define wxUSE_AFM_FOR_POSTSCRIPT 1
-// ----------------------------------------------------------------------------
-// database classes
-// ----------------------------------------------------------------------------
-
-// Define 1 to use ODBC classes
-#define wxUSE_ODBC 0
-
-// For backward compatibility reasons, this parameter now only controls the
-// default scrolling method used by cursors. This default behavior can be
-// overriden by setting the second param of wxDB::wxDbGetConnection() or
-// wxDb() constructor to indicate whether the connection (and any wxDbTable()s
-// that use the connection) should support forward only scrolling of cursors,
-// or both forward and backward support for backward scrolling cursors is
-// dependent on the data source as well as the ODBC driver being used.
-#define wxODBC_FWD_ONLY_CURSORS 1
-
-// Default is 0. Set to 1 to use the deprecated classes, enum types, function,
-// member variables. With a setting of 1, full backward compatability with the
-// 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
-// as future development will be done only on the non-deprecated
-// functions/classes/member variables/etc.
-#define wxODBC_BACKWARD_COMPATABILITY 0
-
-// ----------------------------------------------------------------------------
-// other compiler (mis)features
-// ----------------------------------------------------------------------------
+// Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
+// to create files in SVG (Scalable Vector Graphics) format.
+#define wxUSE_SVG 1
-// Set this to 0 if your compiler can't cope with omission of prototype
-// parameters.
+// Should wxDC provide SetTransformMatrix() and related methods?
//
-// Default is 1.
+// Default is 1 but can be set to 0 if this functionality is not used. Notice
+// that currently only wxMSW supports this so setting this to 0 doesn't change
+// much for non-MSW platforms (although it will still save a few bytes
+// probably).
//
-// Recommended setting: 1 (should never need to set this to 0)
-#define REMOVE_UNUSED_ARG 1
-
-// VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
-// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
-// used anyhow.
-//
-// Default is 1.
-//
-// Recommended setting: whatever your compiler likes more
-#define wxUSE_IOSTREAMH 1
+// Recommended setting: 1.
+#define wxUSE_DC_TRANSFORM_MATRIX 1
// ----------------------------------------------------------------------------
// image format support
// Set to 1 for TIFF format support (requires libtiff)
#define wxUSE_LIBTIFF 1
+// Set to 1 for TGA format support (loading only)
+#define wxUSE_TGA 1
+
// Set to 1 for GIF format support
#define wxUSE_GIF 1
// Set to 1 to compile in wxPalette class
#define wxUSE_PALETTE 1
+// ----------------------------------------------------------------------------
+// wxUniversal-only options
+// ----------------------------------------------------------------------------
+
+// Set to 1 to enable compilation of all themes, this is the default
+#define wxUSE_ALL_THEMES 1
+
+// Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
+// is unset, if it is set these options are not used; notice that metal theme
+// uses Win32 one
+#define wxUSE_THEME_GTK 0
+#define wxUSE_THEME_METAL 0
+#define wxUSE_THEME_MONO 0
+#define wxUSE_THEME_WIN32 0
+
+
projects / wxWidgets.git / blobdiff