// Purpose: interface of wxDataView* classes
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
wxDataViewModel::GetValue in order to define the data model which acts as an
interface between your actual data and the wxDataViewCtrl.
- Since you will usually also allow the wxDataViewCtrl to change your data
- through its graphical interface, you will also have to override
- wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
- to some data has been commited.
+ Note that wxDataViewModel does not define the position or index of any item
+ in the control because different controls might display the same data differently.
+ wxDataViewModel does provide a wxDataViewModel::Compare method which the
+ wxDataViewCtrl may use to sort the data either in conjunction with a column
+ header or without (see wxDataViewModel::HasDefaultCompare).
wxDataViewModel (as indeed the entire wxDataViewCtrl code) is using wxVariant
to store data and its type in a generic way. wxVariant can be extended to contain
- almost any data without changes to the original class.
+ almost any data without changes to the original class. To a certain extent,
+ you can use (the somewhat more elegant) wxAny instead of wxVariant as there
+ is code to convert between the two, but it is unclear what impact this will
+ have on performance.
+
+ Since you will usually allow the wxDataViewCtrl to change your data
+ through its graphical interface, you will also have to override
+ wxDataViewModel::SetValue which the wxDataViewCtrl will call when a change
+ to some data has been committed.
- The data that is presented through this data model is expected to change at
- run-time. You need to inform the data model when a change happened.
+ If the data represented by the model is changed by something else than its
+ associated wxDataViewCtrl, the control has to be notified about the change.
Depending on what happened you need to call one of the following methods:
- wxDataViewModel::ValueChanged,
- wxDataViewModel::ItemAdded,
- wxDataViewModel::ItemsDeleted,
- wxDataViewModel::ItemsChanged.
- Note that wxDataViewModel does not define the position or index of any item
- in the control because different controls might display the same data differently.
- wxDataViewModel does provide a wxDataViewModel::Compare method which the
- wxDataViewCtrl may use to sort the data either in conjunction with a column
- header or without (see wxDataViewModel::HasDefaultCompare).
-
This class maintains a list of wxDataViewModelNotifier which link this class
to the specific implementations on the supported platforms so that e.g. calling
wxDataViewModel::ValueChanged on this model will just call
wxDataViewModel *musicModel = new MyMusicModel;
m_musicCtrl->AssociateModel( musicModel );
musicModel->DecRef(); // avoid memory leak !!
+
+ // add columns now
+ @endcode
+
+ A potentially better way to avoid memory leaks is to use wxObjectDataPtr
+
+ @code
+ wxObjectDataPtr<MyMusicModel> musicModel;
+ wxDataViewCtrl *musicCtrl = new wxDataViewCtrl( this, wxID_ANY );
+ musicModel = new MyMusicModel;
+ m_musicCtrl->AssociateModel( musicModel.get() );
+
// add columns now
@endcode
+
@library{wxadv}
@category{dvc}
*/
*/
void AddNotifier(wxDataViewModelNotifier* notifier);
+ /**
+ Change the value of the given item and update the control to reflect
+ it.
+
+ This function simply calls SetValue() and, if it succeeded,
+ ValueChanged().
+
+ @since 2.9.1
+
+ @param variant
+ The new value.
+ @param item
+ The item (row) to update.
+ @param col
+ The column to update.
+ @return
+ @true if both SetValue() and ValueChanged() returned @true.
+ */
+ bool ChangeValue(const wxVariant& variant,
+ const wxDataViewItem& item,
+ unsigned int col);
+
/**
Called to inform the model that all data has been cleared.
The control will reread the data from the model again.
Override this to indicate that the item has special font attributes.
This only affects the wxDataViewTextRendererText renderer.
+ The base class version always simply returns @false.
+
@see wxDataViewItemAttr.
+
+ @param item
+ The item for which the attribute is requested.
+ @param col
+ The column of the item for which the attribute is requested.
+ @param attr
+ The attribute to be filled in if the function returns @true.
+ @return
+ @true if this item has an attribute or @false otherwise.
*/
virtual bool GetAttr(const wxDataViewItem& item, unsigned int col,
- wxDataViewItemAttr& attr);
+ wxDataViewItemAttr& attr) const;
+
+ /**
+ Override this to indicate that the item should be disabled.
+
+ Disabled items are displayed differently (e.g. grayed out) and cannot
+ be interacted with.
+
+ The base class version always returns @true, thus making all items
+ enabled by default.
+
+ @param item
+ The item whose enabled status is requested.
+ @param col
+ The column of the item whose enabled status is requested.
+ @return
+ @true if this item should be enabled, @false otherwise.
+
+ @note Currently disabling items is fully implemented only for the
+ native control implementation in wxOSX/Cocoa and wxGTK.
+ This feature is only partially supported in the generic
+ version (used by wxMSW) and not supported by the wxOSX/Carbon
+ implementation.
+
+ @since 2.9.2
+ */
+ virtual bool IsEnabled(const wxDataViewItem &item,
+ unsigned int col) const;
/**
Override this so the control can query the child items of an item.
/**
Override this to indicate which wxDataViewItem representing the parent
- of @a item or an invalid wxDataViewItem if the the root item is
+ of @a item or an invalid wxDataViewItem if the root item is
the parent item.
*/
virtual wxDataViewItem GetParent(const wxDataViewItem& item) const = 0;
/**
Override this method to indicate if a container item merely acts as a
headline (or for categorisation) or if it also acts a normal item with
- entries for futher columns. By default returns @false.
+ entries for further columns. By default returns @false.
*/
virtual bool HasContainerColumns(const wxDataViewItem& item) const;
*/
virtual bool HasDefaultCompare() const;
+ /**
+ Return true if there is a value in the given column of this item.
+
+ All normal items have values in all columns but the container items
+ only show their label in the first column (@a col == 0) by default (but
+ see HasContainerColumns()). So this function always returns true for
+ the first column while for the other ones it returns true only if the
+ item is not a container or HasContainerColumns() was overridden to
+ return true for it.
+
+ @since 2.9.1
+ */
+ bool HasValue(const wxDataViewItem& item, unsigned col) const;
+
/**
Override this to indicate of @a item is a container, i.e. if
it can have child items.
/**
Call this to inform the model that an item has been added to the data.
*/
- virtual bool ItemAdded(const wxDataViewItem& parent,
+ bool ItemAdded(const wxDataViewItem& parent,
const wxDataViewItem& item);
/**
Call this to inform the model that an item has changed.
- This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+ This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
event (in which the column fields will not be set) to the user.
*/
- virtual bool ItemChanged(const wxDataViewItem& item);
+ bool ItemChanged(const wxDataViewItem& item);
/**
Call this to inform the model that an item has been deleted from the data.
*/
- virtual bool ItemDeleted(const wxDataViewItem& parent,
+ bool ItemDeleted(const wxDataViewItem& parent,
const wxDataViewItem& item);
/**
Call this to inform the model that several items have been added to the data.
*/
- virtual bool ItemsAdded(const wxDataViewItem& parent,
+ bool ItemsAdded(const wxDataViewItem& parent,
const wxDataViewItemArray& items);
/**
Call this to inform the model that several items have changed.
- This will eventually emit wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+ This will eventually emit @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
events (in which the column fields will not be set) to the user.
*/
- virtual bool ItemsChanged(const wxDataViewItemArray& items);
+ bool ItemsChanged(const wxDataViewItemArray& items);
/**
Call this to inform the model that several items have been deleted.
*/
- virtual bool ItemsDeleted(const wxDataViewItem& parent,
+ bool ItemsDeleted(const wxDataViewItem& parent,
const wxDataViewItemArray& items);
/**
/**
This gets called in order to set a value in the data model.
+
The most common scenario is that the wxDataViewCtrl calls this method
after the user changed some data in the view.
- Afterwards ValueChanged() has to be called!
+ This is the function you need to override in your derived class but if
+ you want to call it, ChangeValue() is usually more convenient as
+ otherwise you need to manually call ValueChanged() to update the
+ control itself.
*/
- virtual bool SetValue(const wxVariant& variant, const wxDataViewItem& item,
+ virtual bool SetValue(const wxVariant& variant,
+ const wxDataViewItem& item,
unsigned int col) = 0;
/**
This is also called from wxDataViewCtrl's internal editing code, e.g. when
editing a text field in the control.
- This will eventually emit a wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
+ This will eventually emit a @c wxEVT_DATAVIEW_ITEM_VALUE_CHANGED
event to the user.
*/
virtual bool ValueChanged(const wxDataViewItem& item,
/**
- @class wxDataViewIndexListModel
-
- wxDataViewIndexListModel is a specialized data model which lets you address
- an item by its position (row) rather than its wxDataViewItem (which you can
- obtain from this class).
- This model also provides its own wxDataViewIndexListModel::Compare
- method which sorts the model's data by the index.
+ @class wxDataViewListModel
- This model is not a virtual model since the control stores each wxDataViewItem.
- Use wxDataViewVirtualListModel if you need to display millions of items or
- have other reason to use a virtual control.
+ Base class with abstract API for wxDataViewIndexListModel and
+ wxDataViewVirtualListModel.
@library{wxadv}
@category{dvc}
*/
-class wxDataViewIndexListModel : public wxDataViewModel
+class wxDataViewListModel : public wxDataViewModel
{
public:
- /**
- Constructor.
- */
- wxDataViewIndexListModel(unsigned int initial_size = 0);
/**
Destructor.
Override this to indicate that the row has special font attributes.
This only affects the wxDataViewTextRendererText() renderer.
+ The base class version always simply returns @false.
+
@see wxDataViewItemAttr.
+
+ @param row
+ The row for which the attribute is requested.
+ @param col
+ The column for which the attribute is requested.
+ @param attr
+ The attribute to be filled in if the function returns @true.
+ @return
+ @true if this item has an attribute or @false otherwise.
*/
virtual bool GetAttrByRow(unsigned int row, unsigned int col,
- wxDataViewItemAttr& attr);
+ wxDataViewItemAttr& attr) const;
+
+ /**
+ Override this if you want to disable specific items.
+
+ The base class version always returns @true, thus making all items
+ enabled by default.
+
+ @param row
+ The row of the item whose enabled status is requested.
+ @param col
+ The column of the item whose enabled status is requested.
+ @return
+ @true if the item at this row and column should be enabled,
+ @false otherwise.
+
+ @note See wxDataViewModel::IsEnabled() for the current status of
+ support for disabling the items under different platforms.
+
+ @since 2.9.2
+ */
+ virtual bool IsEnabledByRow(unsigned int row,
+ unsigned int col) const;
+
+ /**
+ Returns the number of items (or rows) in the list.
+ */
+ unsigned int GetCount() const;
/**
Returns the wxDataViewItem at the given @e row.
};
+/**
+ @class wxDataViewIndexListModel
+
+ wxDataViewIndexListModel is a specialized data model which lets you address
+ an item by its position (row) rather than its wxDataViewItem (which you can
+ obtain from this class).
+ This model also provides its own wxDataViewIndexListModel::Compare
+ method which sorts the model's data by the index.
+
+ This model is not a virtual model since the control stores each wxDataViewItem.
+ Use wxDataViewVirtualListModel if you need to display millions of items or
+ have other reason to use a virtual control.
+
+ @see wxDataViewListModel for the API.
+
+ @library{wxadv}
+ @category{dvc}
+*/
+
+class wxDataViewIndexListModel : public wxDataViewListModel
+{
+public:
+ /**
+ Constructor.
+ */
+ wxDataViewIndexListModel(unsigned int initial_size = 0);
+
+};
/**
@class wxDataViewVirtualListModel
the exact same interface as wxDataViewIndexListModel.
The important difference is that under platforms other than OS X, using this
model will result in a truly virtual control able to handle millions of items
- as the control doesn't store any item (a feature not supported by the
- Carbon API under OS X).
+ as the control doesn't store any item (a feature not supported by OS X).
- @see wxDataViewIndexListModel for the API.
+ @see wxDataViewListModel for the API.
@library{wxadv}
@category{dvc}
*/
-class wxDataViewVirtualListModel : public wxDataViewModel
+
+class wxDataViewVirtualListModel : public wxDataViewListModel
{
public:
/**
Constructor.
*/
wxDataViewVirtualListModel(unsigned int initial_size = 0);
+
};
@class wxDataViewItem
wxDataViewItem is a small opaque class that represents an item in a wxDataViewCtrl
- in a persistent way, i.e. indepent of the position of the item in the control
+ in a persistent way, i.e. independent of the position of the item in the control
or changes to its contents.
It must hold a unique ID of type @e void* in its only field and can be converted
/**
Constructor.
*/
- wxDataViewItem(void* id = NULL);
+ wxDataViewItem();
wxDataViewItem(const wxDataViewItem& item);
+ explicit wxDataViewItem(void* id);
//@}
/**
};
+// ----------------------------------------------------------------------------
+// wxDataViewCtrl flags
+// ----------------------------------------------------------------------------
+
+// size of a wxDataViewRenderer without contents:
+#define wxDVC_DEFAULT_RENDERER_SIZE 20
+
+// the default width of new (text) columns:
+#define wxDVC_DEFAULT_WIDTH 80
+
+// the default width of new toggle columns:
+#define wxDVC_TOGGLE_DEFAULT_WIDTH 30
+
+// the default minimal width of the columns:
+#define wxDVC_DEFAULT_MINWIDTH 30
+
+// The default alignment of wxDataViewRenderers is to take
+// the alignment from the column it owns.
+#define wxDVR_DEFAULT_ALIGNMENT -1
+
+#define wxDV_SINGLE 0x0000 // for convenience
+#define wxDV_MULTIPLE 0x0001 // can select multiple items
+
+#define wxDV_NO_HEADER 0x0002 // column titles not visible
+#define wxDV_HORIZ_RULES 0x0004 // light horizontal rules between rows
+#define wxDV_VERT_RULES 0x0008 // light vertical rules between columns
+
+#define wxDV_ROW_LINES 0x0010 // alternating colour in rows
+#define wxDV_VARIABLE_LINE_HEIGHT 0x0020 // variable line height
+
+// events
+
+wxEventType wxEVT_COMMAND_DATAVIEW_SELECTION_CHANGED;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_COLLAPSED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EXPANDED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_START_EDITING;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_STARTED;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICK;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_SORTED;
+wxEventType wxEVT_COMMAND_DATAVIEW_COLUMN_REORDERED;
+wxEventType wxEVT_COMMAND_DATAVIEW_CACHE_HINT;
+
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_BEGIN_DRAG;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE;
+wxEventType wxEVT_COMMAND_DATAVIEW_ITEM_DROP;
/**
@class wxDataViewCtrl
Multiple selection mode.
@style{wxDV_ROW_LINES}
Use alternating colours for rows if supported by platform and theme.
+ Currently only supported by the native GTK and OS X implementations
+ but not by the generic one.
@style{wxDV_HORIZ_RULES}
Display fine rules between row if supported.
@style{wxDV_VERT_RULES}
@style{wxDV_VARIABLE_LINE_HEIGHT}
Allow variable line heights.
This can be inefficient when displaying large number of items.
+ @style{wxDV_NO_HEADER}
+ Do not show column headers (which are shown by default).
@endStyleTable
@beginEventEmissionTable{wxDataViewEvent}
@event{EVT_DATAVIEW_ITEM_VALUE_CHANGED(id, func)}
Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_VALUE_CHANGED event.
@event{EVT_DATAVIEW_ITEM_CONTEXT_MENU(id, func)}
- Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event.
+ Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_CONTEXT_MENU event
+ generated when the user right clicks inside the control. Notice that
+ this menu is generated even if the click didn't occur on any valid
+ item, in this case wxDataViewEvent::GetItem() simply returns an
+ invalid item.
@event{EVT_DATAVIEW_COLUMN_HEADER_CLICK(id, func)}
Process a @c wxEVT_COMMAND_DATAVIEW_COLUMN_HEADER_CLICKED event.
@event{EVT_DATAVIEW_COLUMN_HEADER_RIGHT_CLICK(id, func)}
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
- const wxValidator& validator = wxDefaultValidator);
+ const wxValidator& validator = wxDefaultValidator,
+ const wxString& name = wxDataViewCtrlNameStr);
/**
Destructor.
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
long style = 0,
- const wxValidator& validator = wxDefaultValidator);
+ const wxValidator& validator = wxDefaultValidator,
+ const wxString& name = wxDataViewCtrlNameStr);
/**
Deletes given column.
*/
wxDataViewColumn* GetExpanderColumn() const;
+ /**
+ Returns the currently focused item.
+
+ This is the item that the keyboard commands apply to. It may be invalid
+ if there is no focus currently.
+
+ This method is mostly useful for the controls with @c wxDV_MULTIPLE
+ style as in the case of single selection it returns the same thing as
+ GetSelection().
+
+ Notice that under all platforms except Mac OS X the currently focused
+ item may be selected or not but under OS X the current item is always
+ selected.
+
+ @see SetCurrentItem()
+
+ @since 2.9.2
+ */
+ wxDataViewItem GetCurrentItem() const;
+
/**
Returns indentation.
*/
*/
wxDataViewModel* GetModel();
+ /**
+ Returns the number of currently selected items.
+
+ This method may be called for both the controls with single and
+ multiple selections and returns the number of selected item, possibly
+ 0, in any case.
+
+ @since 2.9.3
+ */
+ virtual int GetSelectedItemsCount() const;
+
/**
Returns first selected item or an invalid item if none is selected.
+
+ This method may be called for both the controls with single and
+ multiple selections but returns an invalid item if more than one item
+ is selected in the latter case, use HasSelection() to determine if
+ there are any selected items when using multiple selection.
*/
virtual wxDataViewItem GetSelection() const;
/**
Fills @a sel with currently selected items and returns their number.
+
+ This method may be called for both the controls with single and
+ multiple selections. In the single selection case it returns the array
+ with at most one element in it.
+
+ @see GetSelectedItemsCount()
*/
virtual int GetSelections(wxDataViewItemArray& sel) const;
*/
virtual wxDataViewColumn* GetSortingColumn() const;
+ /**
+ Returns true if any items are currently selected.
+
+ This method may be called for both the controls with single and
+ multiple selections.
+
+ Calling this method is equivalent to calling GetSelectedItemsCount()
+ and comparing its result with 0 but is more clear and might also be
+ implemented more efficiently in the future.
+
+ @since 2.9.3
+ */
+ bool HasSelection() const;
+
/**
Hittest.
*/
/**
Select the given item.
+
+ In single selection mode this changes the (unique) currently selected
+ item. In multi selection mode, the @a item is selected and the
+ previously selected items remain selected.
*/
virtual void Select(const wxDataViewItem& item);
void SetExpanderColumn(wxDataViewColumn* col);
/**
- Sets the indendation.
+ Changes the currently focused item.
+
+ The @a item parameter must be valid, there is no way to remove the
+ current item from the control.
+
+ In single selection mode, calling this method is the same as calling
+ Select() and is thus not very useful. In multiple selection mode this
+ method only moves the current item however without changing the
+ selection except under OS X where the current item is always selected,
+ so calling SetCurrentItem() selects @a item if it hadn't been selected
+ before.
+
+ @see GetCurrentItem()
+
+ @since 2.9.2
+ */
+ void SetCurrentItem(const wxDataViewItem& item);
+
+ /**
+ Sets the indentation.
*/
void SetIndent(int indent);
*/
virtual void SetSelections(const wxDataViewItemArray& sel);
+ /**
+ Programmatically starts editing the given item on the given column.
+ Currently not implemented on wxOSX Carbon.
+ @since 2.9.2
+ */
+
+ virtual void StartEditor(const wxDataViewItem & item, unsigned int column);
+
/**
Unselect the given item.
*/
This method only has effect if multiple selections are allowed.
*/
virtual void UnselectAll();
+
+ /**
+ Sets the row height.
+
+ This function can only be used when all rows have the same height, i.e.
+ when wxDV_VARIABLE_LINE_HEIGHT flag is not used.
+
+ Currently this is implemented in the generic and native GTK versions
+ only and nothing is done (and @false returned) when using OS X port.
+
+ Also notice that this method can only be used to increase the row
+ height compared with the default one (as determined by the return value
+ of wxDataViewRenderer::GetSize()), if it is set to a too small value
+ then the minimum required by the renderers will be used.
+
+ @return @true if the line height was changed or @false otherwise.
+
+ @since 2.9.2
+ */
+ virtual bool SetRowHeight(int rowHeight);
};
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemAdded(const wxDataViewItem& parent,
const wxDataViewItem& item) = 0;
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemChanged(const wxDataViewItem& item) = 0;
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemDeleted(const wxDataViewItem& parent,
const wxDataViewItem& item) = 0;
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemsAdded(const wxDataViewItem& parent,
const wxDataViewItemArray& items);
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemsChanged(const wxDataViewItemArray& items);
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ItemsDeleted(const wxDataViewItem& parent,
const wxDataViewItemArray& items);
/**
Called by owning model.
+
+ @return Always return @true from this function in derived classes.
*/
virtual bool ValueChanged(const wxDataViewItem& item, unsigned int col) = 0;
};
*/
enum wxDataViewCellMode
{
+ /**
+ The cell only displays information and cannot be manipulated or
+ otherwise interacted with in any way.
+
+ Note that this doesn't mean that the row being drawn can't be selected,
+ just that a particular element of it cannot be individually modified.
+ */
wxDATAVIEW_CELL_INERT,
/**
- Indicates that the user can double click the cell and something will
- happen (e.g. a window for editing a date will pop up).
+ Indicates that the cell can be @em activated by clicking it or using
+ keyboard.
+
+ Activating a cell is an alternative to showing inline editor when the
+ value can be edited in a simple way that doesn't warrant full editor
+ control. The most typical use of cell activation is toggling the
+ checkbox in wxDataViewToggleRenderer; others would be e.g. an embedded
+ volume slider or a five-star rating column.
+
+ The exact means of activating a cell are platform-dependent, but they
+ are usually similar to those used for inline editing of values.
+ Typically, a cell would be activated by Space or Enter keys or by left
+ mouse click.
+
+ @note Do not confuse this with item activation in wxDataViewCtrl
+ and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is
+ used for activating the item (or, to put it differently, the
+ entire row) similarly to analogous messages in wxTreeCtrl and
+ wxListCtrl, and the effect differs (play a song, open a file
+ etc.). Cell activation, on the other hand, is all about
+ interacting with the individual cell.
+
+ @see wxDataViewCustomRenderer::ActivateCell()
*/
wxDATAVIEW_CELL_ACTIVATABLE,
/**
- Indicates that the user can edit the data in-place, i.e. an control
- will show up after a slow click on the cell. This behaviour is best
- known from changing the filename in most file managers etc.
+ Indicates that the user can edit the data in-place in an inline editor
+ control that will show up when the user wants to edit the cell.
+
+ A typical example of this behaviour is changing the filename in a file
+ managers.
+
+ Editing is typically triggered by slowly double-clicking the cell or by
+ a platform-dependent keyboard shortcut (F2 is typical on Windows, Space
+ and/or Enter is common elsewhere and supported on Windows too).
+
+ @see wxDataViewCustomRenderer::CreateEditorCtrl()
*/
wxDATAVIEW_CELL_EDITABLE
};
One instance of a renderer class is owned by a wxDataViewColumn.
There is a number of ready-to-use renderers provided:
- wxDataViewTextRenderer,
- - wxDataViewTextRendererAttr,
- wxDataViewIconTextRenderer,
- wxDataViewToggleRenderer,
- wxDataViewProgressRenderer,
- wxDataViewBitmapRenderer,
- wxDataViewDateRenderer,
- wxDataViewSpinRenderer.
+ - wxDataViewChoiceRenderer.
Additionally, the user can write own renderers by deriving from
wxDataViewCustomRenderer.
wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
int align = wxDVR_DEFAULT_ALIGNMENT );
+ /**
+ Enable or disable replacing parts of the item text with ellipsis to
+ make it fit the column width.
+
+ This method only makes sense for the renderers working with text, such
+ as wxDataViewTextRenderer or wxDataViewIconTextRenderer.
+
+ By default wxELLIPSIZE_MIDDLE is used.
+
+ @param mode
+ Ellipsization mode, use wxELLIPSIZE_NONE to disable.
+
+ @since 2.9.1
+ */
+ void EnableEllipsize(wxEllipsizeMode mode = wxELLIPSIZE_MIDDLE);
+
+ /**
+ Disable replacing parts of the item text with ellipsis.
+
+ If ellipsizing is disabled, the string will be truncated if it doesn't
+ fit.
+
+ This is the same as @code EnableEllipsize(wxELLIPSIZE_NONE) @endcode.
+
+ @since 2.9.1
+ */
+ void DisableEllipsize();
+
/**
Returns the alignment. See SetAlignment()
*/
virtual int GetAlignment() const;
+ /**
+ Returns the ellipsize mode used by the renderer.
+
+ If the return value is wxELLIPSIZE_NONE, the text is simply truncated
+ if it doesn't fit.
+
+ @see EnableEllipsize()
+ */
+ wxEllipsizeMode GetEllipsizeMode() const;
+
/**
Returns the cell mode.
*/
a small icon next to it as it is typically done in a file manager.
This classes uses the wxDataViewIconText helper class to store its data.
- wxDataViewIonText can be converted to and from a wxVariant using the left shift
- operator.
+ wxDataViewIconText can be converted to and from a wxVariant using the left
+ shift operator.
@library{wxadv}
@category{dvc}
};
-
/**
- @class wxDataViewDateRenderer
+ @class wxDataViewChoiceRenderer
- This class is used by wxDataViewCtrl to render calendar controls.
+ This class is used by wxDataViewCtrl to render choice controls.
+ It stores a string so that SetValue() and GetValue() operate
+ on a variant holding a string.
@library{wxadv}
@category{dvc}
*/
-class wxDataViewDateRenderer : public wxDataViewRenderer
+
+class wxDataViewChoiceRenderer: public wxDataViewRenderer
{
public:
/**
The ctor.
*/
- wxDataViewDateRenderer(const wxString& varianttype = "datetime",
- wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE,
- int align = wxDVR_DEFAULT_ALIGNMENT);
-};
+ wxDataViewChoiceRenderer( const wxArrayString &choices,
+ wxDataViewCellMode mode = wxDATAVIEW_CELL_EDITABLE,
+ int alignment = wxDVR_DEFAULT_ALIGNMENT );
+ /**
+ Returns the choice referred to by index.
+ */
+ wxString GetChoice(size_t index) const;
+
+ /**
+ Returns all choices.
+ */
+ const wxArrayString& GetChoices() const;
+};
/**
- @class wxDataViewTextRendererAttr
-
- The same as wxDataViewTextRenderer but with support for font attributes.
- Font attributes are currently only supported under GTK+ and MSW.
+ @class wxDataViewDateRenderer
- @see wxDataViewModel::GetAttr and wxDataViewItemAttr.
+ This class is used by wxDataViewCtrl to render calendar controls.
@library{wxadv}
@category{dvc}
*/
-class wxDataViewTextRendererAttr : public wxDataViewTextRenderer
+class wxDataViewDateRenderer : public wxDataViewRenderer
{
public:
/**
The ctor.
*/
- wxDataViewTextRendererAttr(const wxString& varianttype = "string",
- wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
- int align = wxDVR_DEFAULT_ALIGNMENT);
+ wxDataViewDateRenderer(const wxString& varianttype = "datetime",
+ wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE,
+ int align = wxDVR_DEFAULT_ALIGNMENT);
};
virtual ~wxDataViewCustomRenderer();
/**
- Override this to react to double clicks or ENTER.
- This method will only be called in wxDATAVIEW_CELL_ACTIVATABLE mode.
- */
- virtual bool Activate( wxRect cell,
- wxDataViewModel* model,
- const wxDataViewItem & item,
- unsigned int col );
+ Override this to react to cell @em activation. Activating a cell is an
+ alternative to showing inline editor when the value can be edited in a
+ simple way that doesn't warrant full editor control. The most typical
+ use of cell activation is toggling the checkbox in
+ wxDataViewToggleRenderer; others would be e.g. an embedded volume
+ slider or a five-star rating column.
+
+ The exact means of activating a cell are platform-dependent, but they
+ are usually similar to those used for inline editing of values.
+ Typically, a cell would be activated by Space or Enter keys or by left
+ mouse click.
+
+ This method will only be called if the cell has the
+ wxDATAVIEW_CELL_ACTIVATABLE mode.
+
+ @param cell
+ Coordinates of the activated cell's area.
+ @param model
+ The model to manipulate in response.
+ @param item
+ Activated item.
+ @param col
+ Activated column of @a item.
+ @param mouseEvent
+ If the activation was triggered by mouse click, contains the
+ corresponding event. Is @NULL otherwise (for keyboard activation).
+ Mouse coordinates are adjusted to be relative to the cell.
+
+ @since 2.9.3
+
+ @note Do not confuse this method with item activation in wxDataViewCtrl
+ and the wxEVT_COMMAND_DATAVIEW_ITEM_ACTIVATED event. That one is
+ used for activating the item (or, to put it differently, the
+ entire row) similarly to analogous messages in wxTreeCtrl and
+ wxListCtrl, and the effect differs (play a song, open a file
+ etc.). Cell activation, on the other hand, is all about
+ interacting with the individual cell.
+
+ @see CreateEditorCtrl()
+ */
+ virtual bool ActivateCell(const wxRect& cell,
+ wxDataViewModel* model,
+ const wxDataViewItem & item,
+ unsigned int col,
+ const wxMouseEvent *mouseEvent);
/**
Override this to create the actual editor control once editing
is about to start.
- @a parent is the parent of the editor control, @a labelRect indicates the
- position and size of the editor control and @a value is its initial value:
+ This method will only be called if the cell has the
+ wxDATAVIEW_CELL_EDITABLE mode. Editing is typically triggered by slowly
+ double-clicking the cell or by a platform-dependent keyboard shortcut
+ (F2 is typical on Windows, Space and/or Enter is common elsewhere and
+ supported on Windows too).
+
+ @param parent
+ The parent of the editor control.
+ @param labelRect
+ Indicates the position and size of the editor control. The control
+ should be created in place of the cell and @a labelRect should be
+ respected as much as possible.
+ @param value
+ Initial value of the editor.
+
+ An example:
@code
{
long l = value;
labelRect.GetTopLeft(), labelRect.GetSize(), 0, 0, 100, l );
}
@endcode
+
+ @see ActivateCell()
*/
- virtual wxControl* CreateEditorCtrl(wxWindow* parent,
- wxRect labelRect,
- const wxVariant& value);
+ virtual wxWindow* CreateEditorCtrl(wxWindow* parent,
+ wxRect labelRect,
+ const wxVariant& value);
/**
- Create DC on request. Internal.
- */
- virtual wxDC* GetDC();
+ Return the attribute to be used for rendering.
+
+ This function may be called from Render() implementation to use the
+ attributes defined for the item if the renderer supports them.
+
+ Notice that when Render() is called, the wxDC object passed to it is
+ already set up to use the correct attributes (e.g. its font is set to
+ bold or italic version if wxDataViewItemAttr::GetBold() or GetItalic()
+ returns true) so it may not be necessary to call it explicitly if you
+ only want to render text using the items attributes.
+
+ @since 2.9.1
+ */
+ const wxDataViewItemAttr& GetAttr() const;
/**
Return size required to show content.
virtual wxSize GetSize() const = 0;
/**
- Overrride this so that the renderer can get the value from the editor
+ Override this so that the renderer can get the value from the editor
control (pointed to by @a editor):
@code
{
}
@endcode
*/
- virtual bool GetValueFromEditorCtrl(wxControl* editor,
+ virtual bool GetValueFromEditorCtrl(wxWindow* editor,
wxVariant& value);
/**
virtual bool HasEditorCtrl() const;
/**
- Overrride this to react to a left click.
+ Override this to react to a left click.
This method will only be called in @c wxDATAVIEW_CELL_ACTIVATABLE mode.
*/
- virtual bool LeftClick( wxPoint cursor,
- wxRect cell,
+ virtual bool LeftClick( const wxPoint& cursor,
+ const wxRect& cell,
wxDataViewModel * model,
const wxDataViewItem & item,
unsigned int col );
wxDC* dc, int state);
/**
- Overrride this to start a drag operation. Not yet supported.
+ Override this to start a drag operation. Not yet supported.
*/
- virtual bool StartDrag(wxPoint cursor, wxRect cell,
+ virtual bool StartDrag(const wxPoint& cursor,
+ const wxRect& cell,
wxDataViewModel* model,
const wxDataViewItem & item,
unsigned int col);
data.push_back( wxVariant("row 3") );
listctrl->AppendItem( data );
@endcode
-
+
@beginStyleTable
See wxDataViewCtrl for the list of supported styles.
@endStyleTable
-
+
@beginEventEmissionTable
See wxDataViewCtrl for the list of events emitted by this class.
@endEventTable
const wxDataViewListStore *GetStore() const;
//@}
+ /**
+ Returns the position of given @e item or wxNOT_FOUND if it's
+ not a valid item.
+
+ @since 2.9.2
+ */
+ int ItemToRow(const wxDataViewItem &item) const;
+
+ /**
+ Returns the wxDataViewItem at the given @e row.
+
+ @since 2.9.2
+ */
+ wxDataViewItem RowToItem(int row) const;
+
+ //@{
+ /**
+ @name Selection handling functions
+ */
+
+ /**
+ Returns index of the selected row or wxNOT_FOUND.
+
+ @see wxDataViewCtrl::GetSelection()
+
+ @since 2.9.2
+ */
+ int GetSelectedRow() const;
+
+ /**
+ Selects given row.
+
+ @see wxDataViewCtrl::Select()
+
+ @since 2.9.2
+ */
+ void SelectRow(unsigned row);
+
+ /**
+ Unselects given row.
+
+ @see wxDataViewCtrl::Unselect()
+
+ @since 2.9.2
+ */
+ void UnselectRow(unsigned row);
+
+ /**
+ Returns true if @a row is selected.
+
+ @see wxDataViewCtrl::IsSelected()
+
+ @since 2.9.2
+ */
+ bool IsRowSelected(unsigned row) const;
+
+ //@}
+
/**
@name Column management functions
*/
//@{
-
+
/**
Appends a column to the control and additionally appends a
column to the store with the type string.
/**
Appends a text column to the control and the store.
-
+
See wxDataViewColumn::wxDataViewColumn for more info about
the parameters.
*/
wxDataViewColumn *AppendTextColumn( const wxString &label,
wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
- int width = -1, wxAlignment align = wxALIGN_LEFT,
+ int width = -1, wxAlignment align = wxALIGN_LEFT,
int flags = wxDATAVIEW_COL_RESIZABLE );
/**
Appends a toggle column to the control and the store.
-
+
See wxDataViewColumn::wxDataViewColumn for more info about
the parameters.
*/
wxDataViewColumn *AppendToggleColumn( const wxString &label,
wxDataViewCellMode mode = wxDATAVIEW_CELL_ACTIVATABLE,
- int width = -1, wxAlignment align = wxALIGN_LEFT,
+ int width = -1, wxAlignment align = wxALIGN_LEFT,
int flags = wxDATAVIEW_COL_RESIZABLE );
/**
*/
wxDataViewColumn *AppendProgressColumn( const wxString &label,
wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
- int width = -1, wxAlignment align = wxALIGN_LEFT,
+ int width = -1, wxAlignment align = wxALIGN_LEFT,
int flags = wxDATAVIEW_COL_RESIZABLE );
/**
*/
wxDataViewColumn *AppendIconTextColumn( const wxString &label,
wxDataViewCellMode mode = wxDATAVIEW_CELL_INERT,
- int width = -1, wxAlignment align = wxALIGN_LEFT,
+ int width = -1, wxAlignment align = wxALIGN_LEFT,
int flags = wxDATAVIEW_COL_RESIZABLE );
/**
Inserts a column to the control and additionally inserts a
column to the list store with the type @a varianttype.
*/
- void InsertColumn( unsigned int pos, wxDataViewColumn *column,
+ void InsertColumn( unsigned int pos, wxDataViewColumn *column,
const wxString &varianttype );
/**
void PrependColumn( wxDataViewColumn *column, const wxString &varianttype );
//@}
-
-
+
+
/**
@name Item management functions
*/
//@{
-
+
/**
Appends an item (=row) to the control and store.
*/
/**
Sets the value in the store and update the control.
- This method assumes that the a string is stored in respective
+ This method assumes that the string is stored in respective
column.
*/
void SetTextValue( const wxString &value, unsigned int row, unsigned int col );
/**
Returns the value from the store.
- This method assumes that the a string is stored in respective
+ This method assumes that the string is stored in respective
column.
*/
wxString GetTextValue( unsigned int row, unsigned int col ) const;
/**
Sets the value in the store and update the control.
- This method assumes that the a boolean value is stored in
+ This method assumes that the boolean value is stored in
respective column.
*/
void SetToggleValue( bool value, unsigned int row, unsigned int col );
/**
Returns the value from the store.
- This method assumes that the a boolean value is stored in
+ This method assumes that the boolean value is stored in
respective column.
*/
bool GetToggleValue( unsigned int row, unsigned int col ) const;
-
+
//@}
};
and forwards most of its API to that class.
Additionally, it uses a wxImageList to store a list of icons.
- The main purpose of this class is to represent a possible replacement for
- wxTreeCtrl.
+ The main purpose of this class is to provide a simple upgrade path for code
+ using wxTreeCtrl.
@beginStyleTable
See wxDataViewCtrl for the list of supported styles.
@endStyleTable
-
+
@beginEventEmissionTable
See wxDataViewCtrl for the list of events emitted by this class.
@endEventTable
wxDataViewTreeCtrl();
/**
- Constructor. Calls Create().
+ Constructor.
+
+ Calls Create().
*/
wxDataViewTreeCtrl(wxWindow* parent, wxWindowID id,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
- long style = wxDV_NO_HEADER,
+ long style = wxDV_NO_HEADER | wxDV_ROW_LINES,
const wxValidator& validator = wxDefaultValidator);
/**
/**
Creates the control and a wxDataViewTreeStore as its internal model.
+
+ The default tree column created by this method is an editable column
+ using wxDataViewIconTextRenderer as its renderer.
*/
bool Create(wxWindow* parent, wxWindowID id,
const wxPoint& pos = wxDefaultPosition,
const wxSize& size = wxDefaultSize,
- long style = wxDV_NO_HEADER,
+ long style = wxDV_NO_HEADER | wxDV_ROW_LINES,
const wxValidator& validator = wxDefaultValidator);
/**
int icon = -1,
wxClientData* data = NULL);
+ /**
+ Returns true if item is a container.
+ */
+ bool IsContainer( const wxDataViewItem& item );
+
/**
Calls the same method from wxDataViewTreeStore but uses
an index position in the image list instead of a wxIcon.
void DeleteAllItems();
/**
- Overriden from wxDataViewModel
+ Overridden from wxDataViewModel
*/
virtual unsigned int GetColumnCount() const;
/**
- Overriden from wxDataViewModel
+ Overridden from wxDataViewModel
*/
virtual wxString GetColumnType( unsigned int col ) const;
/**
- Overriden from wxDataViewIndexListModel
+ Overridden from wxDataViewIndexListModel
*/
virtual void GetValueByRow( wxVariant &value,
unsigned int row, unsigned int col ) const;
/**
- Overriden from wxDataViewIndexListModel
+ Overridden from wxDataViewIndexListModel
*/
virtual bool SetValueByRow( const wxVariant &value,
unsigned int row, unsigned int col );
/**
@class wxDataViewTreeStore
- wxDataViewTreeStore is a specialised wxDataViewModel for stroing simple
+ wxDataViewTreeStore is a specialised wxDataViewModel for storing simple
trees very much like wxTreeCtrl does and it offers a similar API.
This class actually stores the entire tree and the values (therefore its name)
int GetChildCount(const wxDataViewItem& parent) const;
/**
- Returns the client data asoociated with the item.
+ Returns the client data associated with the item.
*/
wxClientData* GetItemData(const wxDataViewItem& item) const;
Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP_POSSIBLE event.
@event{EVT_DATAVIEW_ITEM_DROP(id, func)}
Process a @c wxEVT_COMMAND_DATAVIEW_ITEM_DROP event.
+ @event{EVT_DATAVIEW_CACHE_HINT(id, func)}
+ Process a @c wxEVT_COMMAND_DATAVIEW_CACHE_HINT event.
@endEventTable
-
+
@library{wxadv}
@category{events,dvc}
*/
wxDataViewModel* GetModel() const;
/**
- Returns a the position of a context menu event in screen coordinates.
+ Returns the position of a context menu event in screen coordinates.
*/
wxPoint GetPosition() const;
*/
const wxVariant& GetValue() const;
+ /**
+ Can be used to determine whether the new value is going to be accepted
+ in wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE handler.
+
+ Returns @true if editing the item was cancelled or if the user tried to
+ enter an invalid value (refused by wxDataViewRenderer::Validate()). If
+ this method returns @false, it means that the value in the model is
+ about to be changed to the new one.
+
+ Notice that wxEVT_COMMAND_DATAVIEW_ITEM_EDITING_DONE event handler can
+ call wxNotifyEvent::Veto() to prevent this from happening.
+
+ Currently support for setting this field and for vetoing the change is
+ only available in the generic version of wxDataViewCtrl, i.e. under MSW
+ but not GTK nor OS X.
+
+ @since 2.9.3
+ */
+ bool IsEditCancelled() const;
+
/**
Sets the column index associated with this event.
*/
void SetColumn(int col);
/**
- For wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only.
+ For @c wxEVT_DATAVIEW_COLUMN_HEADER_CLICKED only.
*/
void SetDataViewColumn(wxDataViewColumn* col);
Gets the data buffer for a drop data transfer.
*/
void *GetDataBuffer() const;
+
+ /**
+ Return the first row that will be displayed.
+ */
+ int GetCacheFrom() const;
+
+ /**
+ Return the last row that will be displayed.
+ */
+ int GetCacheTo() const;
};
projects / wxWidgets.git / blobdiff