\end{verbatim}
}
-The values below are the possible return codes of the
+The values below are the possible return codes of the
\helpref{HitTest}{wxtextctrlhittest} method:
{\small
\begin{verbatim}
\func{void}{SetLeftIndent}{\param{int }{indent}, \param{int }{subIndent = 0}}
Sets the left indent in tenths of a millimetre.
-subIndent sets the indent for all lines but the first line in a paragraph
+subIndent sets the indent for all lines but the first line in a paragraph
relative to the first line.
\twocolitem{\windowstyle{wxTE\_RICH2}}{Use rich text control version 2.0 or 3.0
under Win32, this style is ignored under other platforms}
\twocolitem{\windowstyle{wxTE\_AUTO\_URL}}{Highlight the URLs and generate the
-wxTextUrlEvents when mouse events occur over them. This style is supported
-under Win32 only and requires wxTE\_RICH.}
+wxTextUrlEvents when mouse events occur over them. This style is only supported
+for wxTE\_RICH Win32 and multi-line wxGTK2 text controls.}
\twocolitem{\windowstyle{wxTE\_NOHIDESEL}}{By default, the Windows text control
doesn't show the selection when it doesn't have focus - use this style to force
it to always show it. It doesn't do anything under other platforms.}
\twocolitem{\windowstyle{wxHSCROLL}}{A horizontal scrollbar will be created and
-used, so that text won't be wrapped. No effect under GTK+.}
+used, so that text won't be wrapped. No effect under wxGTK1.}
\twocolitem{\windowstyle{wxTE\_LEFT}}{The text in the control will be left-justified (default).}
\twocolitem{\windowstyle{wxTE\_CENTRE}}{The text in the control will be centered (currently wxMSW and wxGTK2 only).}
\twocolitem{\windowstyle{wxTE\_RIGHT}}{The text in the control will be right-justified (currently wxMSW and wxGTK2 only).}
-\twocolitem{\windowstyle{wxTE\_DONTWRAP}}{Same as {\tt wxHSCROLL} style.}
-\twocolitem{\windowstyle{wxTE\_LINEWRAP}}{Wrap the lines too long to be shown entirely at any position (wxUniv only currently).}
-\twocolitem{\windowstyle{wxTE\_WORDWRAP}}{Wrap the lines too long to be shown entirely at word boundaries only (wxUniv only currently).}
+\twocolitem{\windowstyle{wxTE\_DONTWRAP}}{Same as {\tt wxHSCROLL} style: don't wrap at all, show horizontal scrollbar instead.}
+\twocolitem{\windowstyle{wxTE\_CHARWRAP}}{Wrap the lines too long to be shown entirely at any position (wxUniv and wxGTK2 only).}
+\twocolitem{\windowstyle{wxTE\_WORDWRAP}}{Wrap the lines too long to be shown entirely at word boundaries (wxUniv and wxGTK2 only).}
+\twocolitem{\windowstyle{wxTE\_BESTWRAP}}{Wrap the lines at word boundaries or at any other character if there are words longer than the window width (this is the default).}
+\twocolitem{\windowstyle{wxTE\_CAPITALIZE}}{On PocketPC and Smartphone, causes the first letter to be capitalized.}
\end{twocollist}
-See also \helpref{window styles overview}{windowstyles} and
-\helpref{wxTextCtrl::wxTextCtrl}{wxtextctrlctor}.
+See also \helpref{window styles overview}{windowstyles} and \helpref{wxTextCtrl::wxTextCtrl}{wxtextctrlctor}.
\wxheading{wxTextCtrl text format}
separated by {\tt $\backslash$n} characters, i.e. in the Unix text format even
on non-Unix platforms. This allows the user code to ignore the differences
between the platforms but at a price: the indices in the control such as those
-returned by \helpref{GetInsertionPoint}{wxtextctrlgetinsertionpoint} or
+returned by \helpref{GetInsertionPoint}{wxtextctrlgetinsertionpoint} or
\helpref{GetSelection}{wxtextctrlgetselection} can {\bf not} be used as
indices into the string returned by \helpref{GetValue}{wxtextctrlgetvalue} as
-they're going to be slightly off for platforms using
+they're going to be slightly off for platforms using
{\tt $\backslash$r$\backslash$n} as separator (as Windows does), for example.
Instead, if you need to obtain a substring between the $2$ indices obtained
from the control with the help of the functions mentioned above, you should
use \helpref{GetRange}{wxtextctrlgetrange}. And the indices themselves can
-only be passed to other methods, for example
-\helpref{SetInsertionPoint}{wxtextctrlsetinsertionpoint} or
+only be passed to other methods, for example
+\helpref{SetInsertionPoint}{wxtextctrlsetinsertionpoint} or
\helpref{SetSelection}{wxtextctrlsetselection}.
To summarize: never use the indices returned by (multiline) wxTextCtrl as
\twocolitem{{\bf EVT\_TEXT\_ENTER(id, func)}}{Respond to a wxEVT\_COMMAND\_TEXT\_ENTER event,
generated when enter is pressed in a text control (which must have
wxTE\_PROCESS\_ENTER style for this event to be generated).}
-\twocolitem{{\bf EVT\_TEXT\_URL(id, func)}}{A mouse event occured over an URL
-in the text control (Win32 only)}
+\twocolitem{{\bf EVT\_TEXT\_URL(id, func)}}{A mouse event occurred over an URL
+in the text control (wxMSW and wxGTK2 only)}
\twocolitem{{\bf EVT\_TEXT\_MAXLEN(id, func)}}{User tried to enter more text
into the control than the limit set by
\helpref{SetMaxLength}{wxtextctrlsetmaxlength}.}
\func{bool}{EmulateKeyPress}{\param{const wxKeyEvent\& }{event}}
This functions inserts into the control the character which would have been
-inserted if the given key event had occured in the text control. The
+inserted if the given key event had occurred in the text control. The
{\it event} object should be the same as the one passed to {\tt EVT\_KEY\_DOWN}
handler previously by wxWidgets.
\membersection{wxTextCtrl::GetLastPosition}\label{wxtextctrlgetlastposition}
-\constfunc{virtual long}{GetLastPosition}{\void}
+\constfunc{virtual wxTextPos}{GetLastPosition}{\void}
Returns the zero based index of the last position in the text control,
which is equal to the number of characters in the control.
\wxheading{Remarks}
Note that even empty text controls have one line (where the insertion point
-is), so GetNumberOfLines() never returns 0.
+is), so GetNumberOfLines() never returns $0$.
-For gtk\_text (multi-line) controls, the number of lines is
-calculated by actually counting newline characters in the buffer. You
-may wish to avoid using functions that work with line numbers if you are
-working with controls that contain large amounts of text.
+For wxGTK using GTK+ 1.2.x and earlier, the number of lines in a multi-line
+text control is calculated by actually counting newline characters in the
+buffer, i.e. this function returns the number of logical lines and doesn't
+depend on whether any of them are wrapped. For all the other platforms, the
+number of physical lines in the control is returned.
+
+Also note that you may wish to avoid using functions that work with line
+numbers if you are working with controls that contain large amounts of text as
+this function has $O(N)$ complexity for $N$ being the number of lines.
\membersection{wxTextCtrl::GetRange}\label{wxtextctrlgetrange}
\constfunc{virtual wxString}{GetRange}{\param{long}{ from}, \param{long}{ to}}
-Returns the string containing the text staring in the positions {\it from} and
+Returns the string containing the text starting in the positions {\it from} and
up to {\it to} in the control. The positions must have been returned by another
wxTextCtrl method.
Please note that the positions in a multiline wxTextCtrl do {\bf not}
-correspond to the indices in the string returned by
+correspond to the indices in the string returned by
\helpref{GetValue}{wxtextctrlgetvalue} because of the different new line
representations ({\tt CR} or {\tt CR LF}) and so this method should be used to
obtain the correct results instead of extracting parts of the entire value. It
\wxheading{Return value}
-{\tt true} on success, {\tt false} if an error occured - it may also mean that
+{\tt true} on success, {\tt false} if an error occurred - it may also mean that
the styles are not supported under this platform.
\wxheading{See also}
This function finds the character at the specified position expressed in
pixels. If the return code is not \texttt{wxTE\_HT\_UNKNOWN} the row and column
-of the character closest to this position are returned in the \arg{col} and
+of the character closest to this position are returned in the \arg{col} and
\arg{row} parameters (unless the pointers are {\tt NULL} which is allowed).
Please note that this function is currently only implemented in wxUniv,
Returns {\tt true} if the controls contents may be edited by user (note that it
always can be changed by the program), i.e. if the control hasn't been put in
-read-only mode by a previous call to
+read-only mode by a previous call to
\helpref{SetEditable}{wxtextctrlseteditable}.
\constfunc{bool}{IsModified}{\void}
-Returns {\tt true} if the text has been modified by user. Note that calling
+Returns {\tt true} if the text has been modified by user. Note that calling
\helpref{SetValue}{wxtextctrlsetvalue} doesn't make the control modified.
+\wxheading{See also}
+
+\helpref{MarkDirty}{wxtextctrlmarkdirty}
+
\membersection{wxTextCtrl::IsMultiLine}\label{wxtextctrlismultiline}
% VZ: commenting this out as: (a) the docs are wrong (you can't replace
% anything), (b) wxTextCtrl doesn't have any OnChar() anyhow
%% \membersection{wxTextCtrl::OnChar}\label{wxtextctrlonchar}
-%%
+%%
%% \func{void}{OnChar}{\param{wxKeyEvent\& }{event}}
-%%
+%%
%% Default handler for character input.
-%%
+%%
%% \wxheading{Remarks}
-%%
+%%
%% It is possible to intercept character
%% input by overriding this member. Call this function
%% to let the default behaviour take place; not calling
%% it results in the character being ignored. You can
%% replace the {\it keyCode} member of {\it event} to
%% translate keystrokes.
-%%
+%%
%% Note that Windows and Motif have different ways
%% of implementing the default behaviour. In Windows,
%% calling wxTextCtrl::OnChar immediately
%% to let default processing happen. This might affect
%% the way in which you write your OnChar function
%% on different platforms.
-%%
+%%
%% \wxheading{See also}
-%%
+%%
%% \helpref{wxKeyEvent}{wxkeyevent}
+\membersection{wxTextCtrl::MarkDirty}\label{wxtextctrlmarkdirty}
+
+\func{void}{MarkDirty}{\void}
+
+Mark text as modified (dirty).
+
+\wxheading{See also}
+
+\helpref{IsModified}{wxtextctrlismodified}
+
+
\membersection{wxTextCtrl::OnDropFiles}\label{wxtextctrlondropfiles}
\func{void}{OnDropFiles}{\param{wxDropFilesEvent\& }{event}}
\wxheading{Return value}
-{\tt true} on success, {\tt false} if an error occured - may also mean that
+{\tt true} on success, {\tt false} if an error occurred - may also mean that
the styles are not supported under this platform.
\wxheading{See also}
\wxheading{Return value}
-{\tt true} on success, {\tt false} if an error occured - it may also mean that
+{\tt true} on success, {\tt false} if an error occurred - it may also mean that
the styles are not supported under this platform.
\wxheading{See also}
\func{virtual void}{SetValue}{\param{const wxString\& }{ value}}
-Sets the text value and marks the control as not-modified (which means that
+Sets the text value and marks the control as not-modified (which means that
\helpref{IsModified}{wxtextctrlismodified} would return {\tt false} immediately
after the call to SetValue).
\wxheading{Return value}
-The position value.
+The position value, or -1 if {\tt x} or {\tt y} was invalid.
\membersection{wxTextCtrl::operator \cinsert}\label{wxtextctrlinsert}
projects / wxWidgets.git / blobdiff