-\chapter{Functions}\label{functions}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% Name: function.tex
+%% Purpose: Functions and macros
+%% Author: wxWidgets Team
+%% Modified by:
+%% Created:
+%% RCS-ID: $Id$
+%% Copyright: (c) wxWidgets Team
+%% License: wxWindows license
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\chapter{Functions and macros}\label{functions}
\setheader{{\it CHAPTER \thechapter}}{}{}{}{}{{\it CHAPTER \thechapter}}%
\setfooter{\thepage}{}{}{}{}{\thepage}
-The functions and macros defined in wxWindows are described here.
+The functions and macros defined in wxWidgets are described here: you can
+either look up a function using the alphabetical listing of them or find it in
+the corresponding topic.
+
+\section{Alphabetical functions and macros list}\label{functionsalphabetically}
+
+\helpref{CLASSINFO}{classinfo}\\
+\helpref{DECLARE\_ABSTRACT\_CLASS}{declareabstractclass}\\
+\helpref{DECLARE\_APP}{declareapp}\\
+\helpref{DECLARE\_CLASS}{declareclass}\\
+\helpref{DECLARE\_DYNAMIC\_CLASS}{declaredynamicclass}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS2}{implementabstractclass2}\\
+\helpref{IMPLEMENT\_ABSTRACT\_CLASS}{implementabstractclass}\\
+\helpref{IMPLEMENT\_APP}{implementapp}\\
+\helpref{IMPLEMENT\_CLASS2}{implementclass2}\\
+\helpref{IMPLEMENT\_CLASS}{implementclass}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS2}{implementdynamicclass2}\\
+\helpref{IMPLEMENT\_DYNAMIC\_CLASS}{implementdynamicclass}\\
+\helpref{wxAboutBox}{wxaboutbox}\\
+\helpref{wxASSERT}{wxassert}\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}\\
+\helpref{wxASSERT\_MSG}{wxassertmsg}\\
+\helpref{wxAtomicDec}{wxatomicdec}\\
+\helpref{wxAtomicInc}{wxatomicinc}\\
+\helpref{wxBase64Decode}{wxbase64decode}\\
+\helpref{wxBase64Encode}{wxbase64encode}\\
+\helpref{wxBeginBusyCursor}{wxbeginbusycursor}\\
+\helpref{wxBell}{wxbell}\\
+\helpref{wxBITMAP}{wxbitmapmacro}\\
+\helpref{wxCHANGE\_UMASK}{wxchangeumask}\\
+\helpref{wxCHECK}{wxcheck}\\
+\helpref{wxCHECK2\_MSG}{wxcheck2msg}\\
+\helpref{wxCHECK2}{wxcheck2}\\
+\helpref{wxCHECK\_GCC\_VERSION}{wxcheckgccversion}\\
+\helpref{wxCHECK\_MSG}{wxcheckmsg}\\
+\helpref{wxCHECK\_RET}{wxcheckret}\\
+\helpref{wxCHECK\_SUNCC\_VERSION}{wxchecksunccversion}\\
+\helpref{wxCHECK\_VERSION}{wxcheckversion}\\
+\helpref{wxCHECK\_VERSION\_FULL}{wxcheckversionfull}\\
+\helpref{wxCHECK\_W32API\_VERSION}{wxcheckw32apiversion}\\
+\helpref{wxClientDisplayRect}{wxclientdisplayrect}\\
+\helpref{wxClipboardOpen}{functionwxclipboardopen}\\
+\helpref{wxCloseClipboard}{wxcloseclipboard}\\
+\helpref{wxColourDisplay}{wxcolourdisplay}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}\\
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}\\
+\helpref{wxCONCAT}{wxconcat}\\
+\helpref{wxConcatFiles}{wxconcatfiles}\\
+\helpref{wxConstCast}{wxconstcast}\\
+\helpref{wxCopyFile}{wxcopyfile}\\
+\helpref{wxCreateDynamicObject}{wxcreatedynamicobject}\\
+\helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider}\\
+\helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare}\\
+\helpref{wxCRIT\_SECT\_DECLARE\_MEMBER}{wxcritsectdeclaremember}\\
+\helpref{wxCRIT\_SECT\_LOCKER}{wxcritsectlocker}\\
+\helpref{wxCRITICAL\_SECTION}{wxcriticalsectionmacro}\\ % wxcs already taken!
+\helpref{wxDDECleanUp}{wxddecleanup}\\
+\helpref{wxDDEInitialize}{wxddeinitialize}\\
+\helpref{wxDROP\_ICON}{wxdropicon}\\
+\helpref{wxDebugMsg}{wxdebugmsg}\\
+\helpref{WXDEBUG\_NEW}{debugnew}\\
+\helpref{wxDEPRECATED}{wxdeprecated}\\
+\helpref{wxDEPRECATED\_BUT\_USED\_INTERNALLY}{wxdeprecatedbutusedinternally}\\
+\helpref{wxDEPRECATED\_INLINE}{wxdeprecatedinline}\\
+\helpref{wxDirExists}{functionwxdirexists}\\
+\helpref{wxDirSelector}{wxdirselector}\\
+\helpref{wxDisplayDepth}{wxdisplaydepth}\\
+\helpref{wxDisplaySize}{wxdisplaysize}\\
+\helpref{wxDisplaySizeMM}{wxdisplaysizemm}\\
+\helpref{wxDos2UnixFilename}{wxdos2unixfilename}\\
+\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
+\helpref{wxDynamicCast}{wxdynamiccast}\\
+\helpref{wxDYNLIB\_FUNCTION}{wxdynlibfunction}\\
+\helpref{wxEmptyClipboard}{wxemptyclipboard}\\
+\helpref{wxEnableTopLevelWindows}{wxenabletoplevelwindows}\\
+\helpref{wxEndBusyCursor}{wxendbusycursor}\\
+\helpref{wxENTER\_CRIT\_SECT}{wxentercritsect}\\
+\helpref{wxEntry}{wxentry}\\
+\helpref{wxEntryStart}{wxentrystart}\\
+\helpref{wxEntryCleanup}{wxentrycleanup}\\
+\helpref{wxEnumClipboardFormats}{wxenumclipboardformats}\\
+\helpref{wxError}{wxerror}\\
+\helpref{wxExecute}{wxexecute}\\
+\helpref{wxExit}{wxexit}\\
+\helpref{wxEXPLICIT}{wxexplicit}\\
+\helpref{wxFAIL\_MSG}{wxfailmsg}\\
+\helpref{wxFAIL}{wxfail}\\
+\helpref{wxFatalError}{wxfatalerror}\\
+\helpref{wxFileExists}{functionwxfileexists}\\
+\helpref{wxFileModificationTime}{wxfilemodificationtime}\\
+\helpref{wxFileNameFromPath}{wxfilenamefrompath}\\
+\helpref{wxFileSelector}{wxfileselector}\\
+\helpref{wxFindFirstFile}{wxfindfirstfile}\\
+\helpref{wxFindMenuItemId}{wxfindmenuitemid}\\
+\helpref{wxFindNextFile}{wxfindnextfile}\\
+\helpref{wxFindWindowAtPointer}{wxfindwindowatpointer}\\
+\helpref{wxFindWindowAtPoint}{wxfindwindowatpoint}\\
+\helpref{wxFindWindowByLabel}{wxfindwindowbylabel}\\
+\helpref{wxFindWindowByName}{wxfindwindowbyname}\\
+\helpref{wxFinite}{wxfinite}\\
+\helpref{wxGenericAboutBox}{wxgenericaboutbox}\\
+\helpref{wxGetActiveWindow}{wxgetactivewindow}\\
+\helpref{wxGetApp}{wxgetapp}\\
+\helpref{wxGetBatteryState}{wxgetbatterystate}\\
+\helpref{wxGetClipboardData}{wxgetclipboarddata}\\
+\helpref{wxGetClipboardFormatName}{wxgetclipboardformatname}\\
+\helpref{wxGetColourFromUser}{wxgetcolourfromuser}\\
+\helpref{wxGetCwd}{wxgetcwd}\\
+\helpref{wxGetDiskSpace}{wxgetdiskspace}\\
+\helpref{wxGetDisplayName}{wxgetdisplayname}\\
+\helpref{wxGetDisplaySize}{wxdisplaysize}\\
+\helpref{wxGetDisplaySizeMM}{wxdisplaysizemm}\\
+\helpref{wxGetEmailAddress}{wxgetemailaddress}\\
+\helpref{wxGetEnv}{wxgetenv}\\
+\helpref{wxGetFileKind}{wxgetfilekind}\\
+\helpref{wxGetFontFromUser}{wxgetfontfromuser}\\
+\helpref{wxGetFreeMemory}{wxgetfreememory}\\
+\helpref{wxGetFullHostName}{wxgetfullhostname}\\
+\helpref{wxGetHomeDir}{wxgethomedir}\\
+\helpref{wxGetHostName}{wxgethostname}\\
+\helpref{wxGetKeyState}{wxgetkeystate}\\
+\helpref{wxGetLocalTimeMillis}{wxgetlocaltimemillis}\\
+\helpref{wxGetLocalTime}{wxgetlocaltime}\\
+\helpref{wxGetMousePosition}{wxgetmouseposition}\\
+\helpref{wxGetMouseState}{wxgetmousestate}\\
+\helpref{wxGetMultipleChoices}{wxgetmultiplechoices}\\
+\helpref{wxGetNumberFromUser}{wxgetnumberfromuser}\\
+\helpref{wxGetOSDirectory}{wxgetosdirectory}\\
+\helpref{wxGetOsDescription}{wxgetosdescription}\\
+\helpref{wxGetOsVersion}{wxgetosversion}\\
+\helpref{wxGetPasswordFromUser}{wxgetpasswordfromuser}\\
+\helpref{wxGetPowerType}{wxgetpowertype}\\
+\helpref{wxGetPrinterCommand}{wxgetprintercommand}\\
+\helpref{wxGetPrinterFile}{wxgetprinterfile}\\
+\helpref{wxGetPrinterMode}{wxgetprintermode}\\
+\helpref{wxGetPrinterOptions}{wxgetprinteroptions}\\
+\helpref{wxGetPrinterOrientation}{wxgetprinterorientation}\\
+\helpref{wxGetPrinterPreviewCommand}{wxgetprinterpreviewcommand}\\
+\helpref{wxGetPrinterScaling}{wxgetprinterscaling}\\
+\helpref{wxGetPrinterTranslation}{wxgetprintertranslation}\\
+\helpref{wxGetProcessId}{wxgetprocessid}\\
+\helpref{wxGetSingleChoiceData}{wxgetsinglechoicedata}\\
+\helpref{wxGetSingleChoiceIndex}{wxgetsinglechoiceindex}\\
+\helpref{wxGetSingleChoice}{wxgetsinglechoice}\\
+\helpref{wxGetTempFileName}{wxgettempfilename}\\
+\helpref{wxGetTextFromUser}{wxgettextfromuser}\\
+\helpref{wxGetTopLevelParent}{wxgettoplevelparent}\\
+\helpref{wxGetTranslation}{wxgettranslation}\\
+\helpref{wxGetUTCTime}{wxgetutctime}\\
+\helpref{wxGetUserHome}{wxgetuserhome}\\
+\helpref{wxGetUserId}{wxgetuserid}\\
+\helpref{wxGetUserName}{wxgetusername}\\
+\helpref{wxGetWorkingDirectory}{wxgetworkingdirectory}\\
+\helpref{wxGetenv}{wxgetenvmacro}\\
+\helpref{wxHandleFatalExceptions}{wxhandlefatalexceptions}\\
+\helpref{wxICON}{wxiconmacro}\\
+\helpref{wxInfoMessageBox}{wxinfomessagebox}\\
+\helpref{wxINTXX\_SWAP\_ALWAYS}{intswapalways}\\
+\helpref{wxINTXX\_SWAP\_ON\_BE}{intswaponbe}\\
+\helpref{wxINTXX\_SWAP\_ON\_LE}{intswaponle}\\
+\helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}\\
+\helpref{wxInitialize}{wxinitialize}\\
+\helpref{wxIsAbsolutePath}{wxisabsolutepath}\\
+\helpref{wxIsBusy}{wxisbusy}\\
+\helpref{wxIsClipboardFormatAvailable}{wxisclipboardformatavailable}\\
+\helpref{wxIsDebuggerRunning}{wxisdebuggerrunning}\\
+\helpref{wxIsEmpty}{wxisempty}\\
+\helpref{wxIsMainThread}{wxismainthread}\\
+\helpref{wxIsNaN}{wxisnan}\\
+\helpref{wxIsPlatformLittleEndian}{wxisplatformlittleendian}\\
+\helpref{wxIsPlatform64Bit}{wxisplatform64bit}\\
+\helpref{wxIsWild}{wxiswild}\\
+\helpref{wxJoin}{wxjoin}\\
+\helpref{wxKill}{wxkill}\\
+\helpref{wxLaunchDefaultBrowser}{wxlaunchdefaultbrowser}\\
+\helpref{wxLEAVE\_CRIT\_SECT}{wxleavecritsect}\\
+\helpref{wxLoadUserResource}{wxloaduserresource}\\
+\helpref{wxLogDebug}{wxlogdebug}\\
+\helpref{wxLogError}{wxlogerror}\\
+\helpref{wxLogFatalError}{wxlogfatalerror}\\
+\helpref{wxLogMessage}{wxlogmessage}\\
+\helpref{wxLogStatus}{wxlogstatus}\\
+\helpref{wxLogSysError}{wxlogsyserror}\\
+\helpref{wxLogTrace}{wxlogtrace}\\
+\helpref{wxLogVerbose}{wxlogverbose}\\
+\helpref{wxLogWarning}{wxlogwarning}\\
+\helpref{wxLL}{wxll}\\
+\helpref{wxLongLongFmtSpec}{wxlonglongfmtspec}\\
+\helpref{wxMakeMetafilePlaceable}{wxmakemetafileplaceable}\\
+\helpref{wxMatchWild}{wxmatchwild}\\
+\helpref{wxMessageBox}{wxmessagebox}\\
+\helpref{wxMilliSleep}{wxmillisleep}\\
+\helpref{wxMicroSleep}{wxmicrosleep}\\
+\helpref{wxMkdir}{wxmkdir}\\
+\helpref{wxMutexGuiEnter}{wxmutexguienter}\\
+\helpref{wxMutexGuiLeave}{wxmutexguileave}\\
+\helpref{wxNewId}{wxnewid}\\
+\helpref{wxNow}{wxnow}\\
+\helpref{wxOnAssert}{wxonassert}\\
+\helpref{wxON\_BLOCK\_EXIT}{wxonblockexit}\\
+\helpref{wxON\_BLOCK\_EXIT\_OBJ}{wxonblockexitobj}\\
+\helpref{wxOpenClipboard}{wxopenclipboard}\\
+\helpref{wxParseCommonDialogsFilter}{wxparsecommondialogsfilter}\\
+\helpref{wxPathOnly}{wxpathonly}\\
+\helpref{wxPLURAL}{wxplural}\\
+\helpref{wxPostDelete}{wxpostdelete}\\
+\helpref{wxPostEvent}{wxpostevent}\\
+\helpref{wxRegisterClipboardFormat}{wxregisterclipboardformat}\\
+\helpref{wxRegisterId}{wxregisterid}\\
+\helpref{wxRemoveFile}{wxremovefile}\\
+\helpref{wxRenameFile}{wxrenamefile}\\
+\helpref{wxRmdir}{wxrmdir}\\
+\helpref{wxSafeShowMessage}{wxsafeshowmessage}\\
+\helpref{wxSafeYield}{wxsafeyield}\\
+\helpref{wxSetClipboardData}{wxsetclipboarddata}\\
+\helpref{wxSetCursor}{wxsetcursor}\\
+\helpref{wxSetDisplayName}{wxsetdisplayname}\\
+\helpref{wxSetEnv}{wxsetenv}\\
+\helpref{wxSetPrinterCommand}{wxsetprintercommand}\\
+\helpref{wxSetPrinterFile}{wxsetprinterfile}\\
+\helpref{wxSetPrinterMode}{wxsetprintermode}\\
+\helpref{wxSetPrinterOptions}{wxsetprinteroptions}\\
+\helpref{wxSetPrinterOrientation}{wxsetprinterorientation}\\
+\helpref{wxSetPrinterPreviewCommand}{wxsetprinterpreviewcommand}\\
+\helpref{wxSetPrinterScaling}{wxsetprinterscaling}\\
+\helpref{wxSetPrinterTranslation}{wxsetprintertranslation}\\
+\helpref{wxSetWorkingDirectory}{wxsetworkingdirectory}\\
+\helpref{wxShell}{wxshell}\\
+\helpref{wxShowTip}{wxshowtip}\\
+\helpref{wxShutdown}{wxshutdown}\\
+\helpref{wxSleep}{wxsleep}\\
+\helpref{wxSnprintf}{wxsnprintf}\\
+\helpref{wxSplit}{wxsplit}\\
+\helpref{wxSplitPath}{wxsplitfunction}\\
+\helpref{wxStaticCast}{wxstaticcast}\\
+\helpref{wxStrcmp}{wxstrcmp}\\
+\helpref{wxStricmp}{wxstricmp}\\
+\helpref{wxStringEq}{wxstringeq}\\
+\helpref{wxStringMatch}{wxstringmatch}\\
+\helpref{wxStringTokenize}{wxstringtokenize}\\
+\helpref{wxStripMenuCodes}{wxstripmenucodes}\\
+\helpref{wxStrlen}{wxstrlen}\\
+\helpref{wxSTRINGIZE}{wxstringize}\\
+\helpref{wxSTRINGIZE\_T}{wxstringizet}\\
+\helpref{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}{wxsuppressgccprivatedtorwarning}\\
+\helpref{wxSysErrorCode}{wxsyserrorcode}\\
+\helpref{wxSysErrorMsg}{wxsyserrormsg}\\
+\helpref{wxT}{wxt}\\
+\helpref{wxTrace}{wxtrace}\\
+\helpref{WXTRACE}{trace}\\
+\helpref{wxTraceLevel}{wxtracelevel}\\
+\helpref{WXTRACELEVEL}{tracelevel}\\
+\helpref{wxTransferFileToStream}{wxtransferfiletostream}\\
+\helpref{wxTransferStreamToFile}{wxtransferstreamtofile}\\
+\helpref{wxTrap}{wxtrap}\\
+\helpref{wxULL}{wxull}\\
+\helpref{wxUninitialize}{wxuninitialize}\\
+\helpref{wxUnix2DosFilename}{wxunix2dosfilename}\\
+\helpref{wxUnsetEnv}{wxunsetenv}\\
+\helpref{wxUsleep}{wxusleep}\\
+\helpref{wxVaCopy}{wxvacopy}\\
+\helpref{wxVsnprintf}{wxvsnprintf}\\
+\helpref{wxWakeUpIdle}{wxwakeupidle}\\
+\helpref{wxYield}{wxyield}\\
+\helpref{wx\_const\_cast}{wxconstcastraw}\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw}\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}\\
+\helpref{wx\_truncate\_cast}{wxtruncatecast}\\
+\helpref{\_}{underscore}\\
+\helpref{\_T}{underscoret}
+\helpref{\_\_WXFUNCTION\_\_}{wxfunction}
+
+
\section{Version macros}\label{versionfunctions}
-The following constants are defined in wxWindows:
+The following constants are defined in wxWidgets:
\begin{itemize}\itemsep=0pt
-\item {\tt wxMAJOR\_VERSION} is the major version of wxWindows
-\item {\tt wxMINOR\_VERSION} is the minor version of wxWindows
-\item {\tt wxRELASE\_NUMBER} is the release number
+\item {\tt wxMAJOR\_VERSION} is the major version of wxWidgets
+\item {\tt wxMINOR\_VERSION} is the minor version of wxWidgets
+\item {\tt wxRELEASE\_NUMBER} is the release number
+\item {\tt wxSUBRELEASE\_NUMBER} is the subrelease number which is $0$ for all
+official releases
\end{itemize}
-For example, the values or these constants for wxWindows 2.1.15 are 2, 1 and
+For example, the values or these constants for wxWidgets 2.1.15 are 2, 1 and
15.
Additionally, {\tt wxVERSION\_STRING} is a user-readable string containing
-the full wxWindows version and {\tt wxVERSION\_NUMBER} is a combination of the
+the full wxWidgets version and {\tt wxVERSION\_NUMBER} is a combination of the
three version numbers above: for 2.1.15, it is 2115 and it is 2200 for
-wxWindows 2.2.
+wxWidgets 2.2.
+
+The subrelease number is only used for the sources in between official releases
+and so normally is not useful.
\wxheading{Include files}
<wx/version.h> or <wx/defs.h>
+
+\membersection{wxCHECK\_GCC\_VERSION}\label{wxcheckgccversion}
+
+\func{bool}{wxCHECK\_GCC\_VERSION}{\param{}{major, minor}}
+
+Returns $1$ if the compiler being used to compile the code is GNU C++
+compiler (g++) version major.minor or greater. Otherwise, and also if
+the compiler is not GNU C++ at all, returns $0$.
+
+
+\membersection{wxCHECK\_SUNCC\_VERSION}\label{wxchecksunccversion}
+
+\func{bool}{wxCHECK\_SUNCC\_VERSION}{\param{}{major, minor}}
+
+Returns $1$ if the compiler being used to compile the code is Sun CC Pro
+compiler and its version is at least \texttt{major.minor}. Otherwise returns
+$0$.
+
+
\membersection{wxCHECK\_VERSION}\label{wxcheckversion}
\func{bool}{wxCHECK\_VERSION}{\param{}{major, minor, release}}
-This is a macro which evaluates to true if the current wxWindows version is at
+This is a macro which evaluates to true if the current wxWidgets version is at
least major.minor.release.
-For example, to test if the program is compiled with wxWindows 2.2 or higher,
+For example, to test if the program is compiled with wxWidgets 2.2 or higher,
the following can be done:
\begin{verbatim}
}
\end{verbatim}
-\section{Thread functions}\label{threadfunctions}
-\wxheading{Include files}
+\membersection{wxCHECK\_VERSION\_FULL}\label{wxcheckversionfull}
-<wx/thread.h>
+\func{bool}{wxCHECK\_VERSION\_FULL}{\param{}{major, minor, release, subrel}}
-\wxheading{See also}
+Same as \helpref{wxCHECK\_VERSION}{wxcheckversion} but also checks that
+\texttt{wxSUBRELEASE\_NUMBER} is at least \arg{subrel}.
-\helpref{wxThread}{wxthread}, \helpref{wxMutex}{wxmutex}, \helpref{Multithreading overview}{wxthreadoverview}
-\membersection{::wxMutexGuiEnter}\label{wxmutexguienter}
+\membersection{wxCHECK\_W32API\_VERSION}\label{wxcheckw32apiversion}
-\func{void}{wxMutexGuiEnter}{\void}
+\func{bool}{wxCHECK\_W32API\_VERSION}{\param{}{major, minor, release}}
-This function must be called when any thread other than the main GUI thread
-wants to get access to the GUI library. This function will block the execution
-of the calling thread until the main thread (or any other thread holding the
-main GUI lock) leaves the GUI library and no other thread will enter the GUI
-library until the calling thread calls \helpref{::wxMutexGuiLeave()}{wxmutexguileave}.
+Returns $1$ if the version of w32api headers used is major.minor.release or
+greater. Otherwise, and also if we are not compiling with mingw32/cygwin under
+Win32 at all, returns $0$.
-Typically, these functions are used like this:
-\begin{verbatim}
-void MyThread::Foo(void)
-{
- // before doing any GUI calls we must ensure that this thread is the only
- // one doing it!
- wxMutexGuiEnter();
+\section{Application initialization and termination}\label{appinifunctions}
- // Call GUI here:
- my_window->DrawSomething();
+The functions in this section are used on application startup/shutdown and also
+to control the behaviour of the main event loop of the GUI programs.
- wxMutexGuiLeave();
-}
-\end{verbatim}
-Note that under GTK, no creation of top-level windows is allowed in any
-thread but the main one.
+\membersection{::wxEntry}\label{wxentry}
-This function is only defined on platforms which support preemptive
-threads.
+This initializes wxWidgets in a platform-dependent way. Use this if you are not
+using the default wxWidgets entry code (e.g. main or WinMain). For example, you
+can initialize wxWidgets from an Microsoft Foundation Classes application using
+this function.
-\membersection{::wxMutexGuiLeave}\label{wxmutexguileave}
+The following overload of wxEntry is available under all platforms:
-\func{void}{wxMutexGuiLeave}{\void}
+\func{int}{wxEntry}{\param{int\&}{ argc}, \param{wxChar **}{argv}}
-See \helpref{::wxMutexGuiEnter()}{wxmutexguienter}.
+Under MS Windows, an additional overload suitable for calling from
+\texttt{WinMain} is available:
-This function is only defined on platforms which support preemptive
-threads.
+\func{int}{wxEntry}{\param{HINSTANCE }{hInstance}, \param{HINSTANCE }{hPrevInstance = \NULL}, \param{char *}{pCmdLine = \NULL}, \param{int }{nCmdShow = \texttt{SW\_SHOWNORMAL}}}
-\section{File functions}\label{filefunctions}
+(notice that under Windows CE platform, and only there, the type of
+\arg{pCmdLine} is \texttt{wchar\_t *}, otherwise it is \texttt{char *}, even in
+Unicode build).
-\wxheading{Include files}
+\wxheading{See also}
-<wx/utils.h>
+\helpref{wxEntryStart}{wxentrystart}
-\wxheading{See also}
+\wxheading{Remarks}
-\helpref{wxPathList}{wxpathlist}, \helpref{wxDir}{wxdir}, \helpref{wxFile}{wxfile}
+To clean up wxWidgets, call wxApp::OnExit followed by the static function
+wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWidgets:
-\membersection{::wxDirExists}
+\begin{verbatim}
+int CTheApp::ExitInstance()
+{
+ // OnExit isn't called by CleanUp so must be called explicitly.
+ wxTheApp->OnExit();
+ wxApp::CleanUp();
-\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
+ return CWinApp::ExitInstance();
+}
+\end{verbatim}
-Returns TRUE if the directory exists.
+\wxheading{Include files}
-\membersection{::wxDos2UnixFilename}
+<wx/app.h>
-\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
-Converts a DOS to a Unix filename by replacing backslashes with forward
-slashes.
-\membersection{::wxFileExists}
+\membersection{::wxEntryCleanup}\label{wxentrycleanup}
-\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
+\func{void}{wxEntryCleanup}{\void}
-Returns TRUE if the file exists. It also returns TRUE if the file is
-a directory.
+Free resources allocated by a successful call to \helpref{wxEntryStart}{wxentrystart}.
-\membersection{::wxFileModificationTime}\label{wxfilemodificationtime}
+\wxheading{Include files}
-\func{time\_t}{wxFileModificationTime}{\param{const wxString\& }{filename}}
+<wx/init.h>
-Returns time of last modification of given file.
-\membersection{::wxFileNameFromPath}
+\membersection{::wxEntryStart}\label{wxentrystart}
-\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
+\func{bool}{wxEntryStart}{\param{int\&}{ argc}, \param{wxChar **}{argv}}
-\func{char*}{wxFileNameFromPath}{\param{char* }{path}}
+This function can be used to perform the initialization of wxWidgets if you
+can't use the default initialization code for any reason.
-Returns the filename for a full path. The second form returns a pointer to
-temporary storage that should not be deallocated.
+If the function returns \true, the initialization was successful and the global
+\helpref{wxApp}{wxapp} object \texttt{wxTheApp} has been created. Moreover,
+\helpref{wxEntryCleanup}{wxentrycleanup} must be called afterwards. If the
+function returns \false, a catastrophic initialization error occured and (at
+least the GUI part of) the library can't be used at all.
-\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
+Notice that parameters \arg{argc} and \arg{argv} may be modified by this
+function.
-\func{wxString}{wxFindFirstFile}{\param{const char*}{spec}, \param{int}{ flags = 0}}
+An additional overload of wxEntryStart() is provided under MSW only: it is
+meant to be called with the parameters passed to \texttt{WinMain()}.
-This function does directory searching; returns the first file
-that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
-get the next matching file. Neither will report the current directory "." or the
-parent directory "..".
+\func{bool}{wxEntryStart}{\param{HINSTANCE }{hInstance}, \param{HINSTANCE }{hPrevInstance = \NULL}, \param{char *}{pCmdLine = \NULL}, \param{int }{nCmdShow = \texttt{SW\_SHOWNORMAL}}}
-{\it spec} may contain wildcards.
+(notice that under Windows CE platform, and only there, the type of
+\arg{pCmdLine} is \texttt{wchar\_t *}, otherwise it is \texttt{char *}, even in
+Unicode build).
-{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
+\wxheading{Include files}
-For example:
+<wx/init.h>
-\begin{verbatim}
- wxString f = wxFindFirstFile("/home/project/*.*");
- while ( !f.IsEmpty() )
- {
- ...
- f = wxFindNextFile();
- }
-\end{verbatim}
-\membersection{::wxFindNextFile}\label{wxfindnextfile}
+\membersection{::wxGetApp}\label{wxgetapp}
-\func{wxString}{wxFindNextFile}{\void}
+\func{wxAppDerivedClass\&}{wxGetApp}{\void}
-Returns the next file that matches the path passed to \helpref{wxFindFirstFile}{wxfindfirstfile}.
+This function doesn't exist in wxWidgets but it is created by using
+the \helpref{IMPLEMENT\_APP}{implementapp} macro. Thus, before using it
+anywhere but in the same module where this macro is used, you must make it
+available using \helpref{DECLARE\_APP}{declareapp}.
-See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+The advantage of using this function compared to directly using the global
+wxTheApp pointer is that the latter is of type {\tt wxApp *} and so wouldn't
+allow you to access the functions specific to your application class but not
+present in wxApp while wxGetApp() returns the object of the right type.
-\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
-\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
+\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
-This function returns the total number of bytes and number of free bytes on
-the disk containing the directory {\it path} (it should exist). Both
-{\it total} and {\it free} parameters may be {\tt NULL} if the corresponding
-information is not needed.
+\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = true}}
-\wxheading{Returns}
+If {\it doIt} is true, the fatal exceptions (also known as general protection
+faults under Windows or segmentation violations in the Unix world) will be
+caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
+By default, i.e. before this function is called, they will be handled in the
+normal way which usually just means that the application will be terminated.
+Calling wxHandleFatalExceptions() with {\it doIt} equal to false will restore
+this default behaviour.
-{\tt TRUE} on success, {\tt FALSE} if an error occured (for example, the
-directory doesn't exist).
+Notice that this function is only available if
+\texttt{wxUSE\_ON\_FATAL\_EXCEPTION} is $1$ and under Windows platform this
+requires a compiler with support for SEH (structured exception handling) which
+currently means only Microsoft Visual C++ or a recent Borland C++ version.
-\wxheading{Portability}
-This function is implemented for Win16 (only for drives less than 2Gb), Win32,
-Mac OS and generic Unix provided the system has {\tt statfs()} function.
+\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
-This function first appeared in wxWindows 2.3.2.
+\func{void}{wxInitAllImageHandlers}{\void}
-\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
+Initializes all available image handlers. For a list of available handlers,
+see \helpref{wxImage}{wximage}.
-\func{wxString}{wxGetOSDirectory}{\void}
+\wxheading{See also}
-Returns the Windows directory under Windows; on other platforms returns the empty string.
+\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
+
+\wxheading{Include files}
-\membersection{::wxIsAbsolutePath}
+<wx/image.h>
-\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
-Returns TRUE if the argument is an absolute filename, i.e. with a slash
-or drive name at the beginning.
+\membersection{::wxInitialize}\label{wxinitialize}
-\membersection{::wxPathOnly}
+\func{bool}{wxInitialize}{\void}
-\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
+This function is used in wxBase only and only if you don't create
+\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
+{\tt main()} function before calling any other wxWidgets functions.
-Returns the directory part of the filename.
+If the function returns \false the initialization could not be performed,
+in this case the library cannot be used and
+\helpref{wxUninitialize}{wxuninitialize} shouldn't be called neither.
-\membersection{::wxUnix2DosFilename}
+This function may be called several times but
+\helpref{wxUninitialize}{wxuninitialize} must be called for each successful
+call to this function.
-\func{void}{wxUnix2DosFilename}{\param{const wxString\& }{s}}
+\wxheading{Include files}
-Converts a Unix to a DOS filename by replacing forward
-slashes with backslashes.
+<wx/app.h>
-\membersection{::wxConcatFiles}
-\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
-\param{const wxString\& }{file3}}
+\membersection{::wxSafeYield}\label{wxsafeyield}
-Concatenates {\it file1} and {\it file2} to {\it file3}, returning
-TRUE if successful.
+\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}, \param{bool}{
+ onlyIfNeeded = false}}
-\membersection{::wxCopyFile}
+This function is similar to wxYield, except that it disables the user input to
+all program windows before calling wxYield and re-enables it again
+afterwards. If {\it win} is not NULL, this window will remain enabled,
+allowing the implementation of some limited user interaction.
-\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = TRUE}}
+Returns the result of the call to \helpref{::wxYield}{wxyield}.
-Copies {\it file1} to {\it file2}, returning TRUE if successful. If
-{\it overwrite} parameter is TRUE (default), the destination file is overwritten
-if it exists, but if {\it overwrite} is FALSE, the functions failes in this
-case.
+\wxheading{Include files}
-\membersection{::wxGetCwd}\label{wxgetcwd}
+<wx/utils.h>
-\func{wxString}{wxGetCwd}{\void}
-Returns a string containing the current (or working) directory.
+\membersection{::wxUninitialize}\label{wxuninitialize}
-\membersection{::wxGetWorkingDirectory}
+\func{void}{wxUninitialize}{\void}
-\func{wxString}{wxGetWorkingDirectory}{\param{char*}{buf=NULL}, \param{int }{sz=1000}}
+This function is for use in console (wxBase) programs only. It must be called
+once for each previous successful call to \helpref{wxInitialize}{wxinitialize}.
-This function is obsolete: use \helpref{wxGetCwd}{wxgetcwd} instead.
+\wxheading{Include files}
-Copies the current working directory into the buffer if supplied, or
-copies the working directory into new storage (which you must delete yourself)
-if the buffer is NULL.
+<wx/app.h>
-{\it sz} is the size of the buffer if supplied.
-\membersection{::wxGetTempFileName}
+\membersection{::wxYield}\label{wxyield}
-\func{char*}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char* }{buf=NULL}}
+\func{bool}{wxYield}{\void}
-\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
+Calls \helpref{wxApp::Yield}{wxappyield}.
-Makes a temporary filename based on {\it prefix}, opens and closes the file,
-and places the name in {\it buf}. If {\it buf} is NULL, new store
-is allocated for the temporary filename using {\it new}.
+This function is kept only for backwards compatibility. Please use
+the \helpref{wxApp::Yield}{wxappyield} method instead in any new code.
-Under Windows, the filename will include the drive and name of the
-directory allocated for temporary files (usually the contents of the
-TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+\wxheading{Include files}
-It is the application's responsibility to create and delete the file.
+<wx/app.h> or <wx/utils.h>
-\membersection{::wxIsWild}\label{wxiswild}
-\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
+\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
-Returns TRUE if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+\func{void}{wxWakeUpIdle}{\void}
-\membersection{::wxMatchWild}\label{wxmatchwild}
+This functions wakes up the (internal and platform dependent) idle system, i.e. it
+will force the system to send an idle event even if the system currently {\it is}
+ idle and thus would not send any idle event until after some other event would get
+sent. This is also useful for sending events between two threads and is used by
+the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
+\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
+\wxheading{Include files}
-Returns TRUE if the {\it pattern}\/ matches the {\it text}\/; if {\it
-dot\_special}\/ is TRUE, filenames beginning with a dot are not matched
-with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
+<wx/app.h>
-\membersection{::wxMkdir}
-\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
-Makes the directory {\it dir}, returning TRUE if successful.
+\section{Process control functions}\label{processfunctions}
-{\it perm} is the access mask for the directory for the systems on which it is
-supported (Unix) and doesn't have effect for the other ones.
+The functions in this section are used to launch or terminate the other
+processes.
-\membersection{::wxRemoveFile}
-\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
+\membersection{::wxExecute}\label{wxexecute}
-Removes {\it file}, returning TRUE if successful.
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{int }{sync = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
-\membersection{::wxRenameFile}
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteCommand}}
-\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}}
+\func{long}{wxExecute}{\param{char **}{argv}, \param{int }{flags = wxEXEC\_ASYNC}, \param{wxProcess *}{callback = NULL}}
-Renames {\it file1} to {\it file2}, returning TRUE if successful.
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteArgs}}
-\membersection{::wxRmdir}
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{int }{flags = 0}}
-\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdout} and it
+only takes the {\tt command} argument,
+and returns a 2-element list {\tt ( status, output )}, where {\tt output} is
+an array reference.}
-Removes the directory {\it dir}, returning TRUE if successful. Does not work under VMS.
+\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}, \param{int }{flags = 0}}
-The {\it flags} parameter is reserved for future use.
+\perlnote{In wxPerl this function is called \texttt{Wx::ExecuteStdoutStderr}
+and it only takes the {\tt command} argument,
+and returns a 3-element list {\tt ( status, output, errors )}, where
+{\tt output} and {\tt errors} are array references.}
-\membersection{::wxSetWorkingDirectory}
+Executes another program in Unix or Windows.
-\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
+The first form takes a command string, such as {\tt "emacs file.txt"}.
-Sets the current working directory, returning TRUE if the operation succeeded.
-Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+The second form takes an array of values: a command, any number of
+arguments, terminated by NULL.
-\membersection{::wxSplitPath}\label{wxsplitfunction}
+The semantics of the third and fourth versions is different from the first two
+and is described in more details below.
-\func{void}{wxSplitPath}{\param{const char *}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
+If {\it flags} parameter contains {\tt wxEXEC\_ASYNC} flag (the default), flow
+of control immediately returns. If it contains {\tt wxEXEC\_SYNC}, the current
+application waits until the other program has terminated.
-This function splits a full file name into components: the path (including possible disk/drive
-specification under Windows), the base name and the extension. Any of the output parameters
-({\it path}, {\it name} or {\it ext}) may be NULL if you are not interested in the value of
-a particular component.
+In the case of synchronous execution, the return value is the exit code of
+the process (which terminates by the moment the function returns) and will be
+$-1$ if the process couldn't be started and typically 0 if the process
+terminated successfully. Also, while waiting for the process to
+terminate, wxExecute will call \helpref{wxYield}{wxyield}. Because of this, by
+default this function disables all application windows to avoid unexpected
+reentrancies which could result from the users interaction with the program
+while the child process is running. If you are sure that it is safe to not
+disable the program windows, you may pass \texttt{wxEXEC\_NODISABLE} flag to
+prevent this automatic disabling from happening.
-wxSplitPath() will correctly handle filenames with both DOS and Unix path separators under
-Windows, however it will not consider backslashes as path separators under Unix (where backslash
-is a valid character in a filename).
+For asynchronous execution, however, the return value is the process id and
+zero value indicates that the command could not be executed. As an added
+complication, the return value of $-1$ in this case indicates that we didn't
+launch a new process, but connected to the running one (this can only happen in
+case of using DDE under Windows for command execution). In particular, in this,
+and only this, case the calling code will not get the notification about
+process termination.
-On entry, {\it fullname} should be non-NULL (it may be empty though).
+If callback isn't NULL and if execution is asynchronous,
+\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
+the process finishes. Specifying this parameter also allows you to redirect the
+standard input and/or output of the process being launched by calling
+\helpref{Redirect}{wxprocessredirect}. If the child process IO is redirected,
+under Windows the process window is not shown by default (this avoids having to
+flush an unnecessary console for the processes which don't create any windows
+anyhow) but a {\tt wxEXEC\_NOHIDE} flag can be used to prevent this from
+happening, i.e. with this flag the child process window will be shown normally.
+
+Under Unix the flag {\tt wxEXEC\_MAKE\_GROUP\_LEADER} may be used to ensure
+that the new process is a group leader (this will create a new session if
+needed). Calling \helpref{wxKill}{wxkill} passing wxKILL\_CHILDREN will
+kill this process as well as all of its children (except those which have
+started their own session).
+
+The {\tt wxEXEC\_NOEVENTS} flag prevents processing of any events from taking
+place while the child process is running. It should be only used for very
+short-lived processes as otherwise the application windows risk becoming
+unresponsive from the users point of view. As this flag only makes sense with
+{\tt wxEXEC\_SYNC}, {\tt wxEXEC\_BLOCK} equal to the sum of both of these flags
+is provided as a convenience.
-On return, {\it path} contains the file path (without the trailing separator), {\it name}
-contains the file name and {\it ext} contains the file extension without leading dot. All
-three of them may be empty if the corresponding component is. The old contents of the
-strings pointed to by these parameters will be overwritten in any case (if the pointers
-are not NULL).
+Finally, you may use the third overloaded version of this function to execute
+a process (always synchronously, the contents of \arg{flags} is or'd with
+\texttt{wxEXEC\_SYNC}) and capture its output in the array \arg{output}. The
+fourth version adds the possibility to additionally capture the messages from
+standard error output in the \arg{errors} array.
-\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
+{\bf NB:} Currently wxExecute() can only be used from the main thread, calling
+this function from another thread will result in an assert failure in debug
+build and won't work.
-\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
+\wxheading{See also}
-Copies the given file to {\it stream}. Useful when converting an old application to
-use streams (within the document/view framework, for example).
+\helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess}, \helpref{Exec sample}{sampleexec}.
-Use of this function requires the file wx\_doc.h to be included.
+\wxheading{Parameters}
-\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
+\docparam{command}{The command to execute and any parameters to pass to it as a
+single string.}
-\func{bool}{wxTransferStreamToFile}{\param{istream\& }{stream} \param{const wxString\& }{filename}}
+\docparam{argv}{The command to execute should be the first element of this
+array, any additional ones are the command parameters and the array must be
+terminated with a NULL pointer.}
-Copies the given stream to the file {\it filename}. Useful when converting an old application to
-use streams (within the document/view framework, for example).
+\docparam{flags}{Combination of bit masks {\tt wxEXEC\_ASYNC},\rtfsp
+{\tt wxEXEC\_SYNC} and {\tt wxEXEC\_NOHIDE}}
-Use of this function requires the file wx\_doc.h to be included.
+\docparam{callback}{An optional pointer to \helpref{wxProcess}{wxprocess}}
-\section{Network functions}\label{networkfunctions}
+\wxheading{Include files}
-\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+<wx/utils.h>
-\func{wxString}{wxGetFullHostName}{\void}
-Returns the FQDN (fully qualified domain host name) or an empty string on
-error.
+\membersection{::wxExit}\label{wxexit}
-\wxheading{See also}
+\func{void}{wxExit}{\void}
-\helpref{wxGetHostName}{wxgethostname}
+Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
+Should only be used in an emergency: normally the top-level frame
+should be deleted (after deleting all other frames) to terminate the
+application. See \helpref{wxCloseEvent}{wxcloseevent} and \helpref{wxApp}{wxapp}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/app.h>
-\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
-\func{bool}{wxGetEmailAddress}{\param{const wxString\& }{buf}, \param{int }{sz}}
+\membersection{::wxJoin}\label{wxjoin}
-Copies the user's email address into the supplied buffer, by
-concatenating the values returned by \helpref{wxGetFullHostName}{wxgetfullhostname}\rtfsp
-and \helpref{wxGetUserId}{wxgetuserid}.
+\func{wxString}{wxJoin}{\param{const wxArrayString\&}{ arr}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '$\backslash$'}}
-Returns TRUE if successful, FALSE otherwise.
+Concatenate all lines of the given \helpref{wxArrayString}{wxarraystring} object using the separator \arg{sep} and returns
+the result as a \helpref{wxString}{wxstring}.
+
+If the \arg{escape} character is non-\NULL, then it's used as prefix for each occurrence of \arg{sep}
+in the strings contained in \arg{arr} before joining them which is necessary
+in order to be able to recover the original array contents from the string
+later using \helpref{wxSplit}{wxsplit}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/arrstr.h>
-\membersection{::wxGetHostName}\label{wxgethostname}
-\func{wxString}{wxGetHostName}{\void}
+\membersection{::wxKill}\label{wxkill}
+
+\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}, \param{int }{flags = 0}}
+
+Equivalent to the Unix kill function: send the given signal {\it sig} to the
+process with PID {\it pid}. The valid signal values are
+
+\begin{verbatim}
+enum wxSignal
+{
+ wxSIGNONE = 0, // verify if the process exists under Unix
+ wxSIGHUP,
+ wxSIGINT,
+ wxSIGQUIT,
+ wxSIGILL,
+ wxSIGTRAP,
+ wxSIGABRT,
+ wxSIGEMT,
+ wxSIGFPE,
+ wxSIGKILL, // forcefully kill, dangerous!
+ wxSIGBUS,
+ wxSIGSEGV,
+ wxSIGSYS,
+ wxSIGPIPE,
+ wxSIGALRM,
+ wxSIGTERM // terminate the process gently
+};
+\end{verbatim}
+
+{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
+under both Unix and Windows but all the other signals are equivalent to
+{\tt wxSIGTERM} under Windows.
+
+Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
+be filled with an element of {\tt wxKillError} enum:
+
+\begin{verbatim}
+enum wxKillError
+{
+ wxKILL_OK, // no error
+ wxKILL_BAD_SIGNAL, // no such signal
+ wxKILL_ACCESS_DENIED, // permission denied
+ wxKILL_NO_PROCESS, // no such process
+ wxKILL_ERROR // another, unspecified error
+};
+\end{verbatim}
+
+The {\it flags} parameter can be wxKILL\_NOCHILDREN (the default),
+or wxKILL\_CHILDREN, in which case the child processes of this
+process will be killed too. Note that under Unix, for wxKILL\_CHILDREN
+to work you should have created the process by passing wxEXEC\_MAKE\_GROUP\_LEADER
+to wxExecute.
+
+\wxheading{See also}
+
+\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
+\helpref{wxProcess::Exists}{wxprocessexists},\rtfsp
+\helpref{Exec sample}{sampleexec}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetProcessId}\label{wxgetprocessid}
+
+\func{unsigned long}{wxGetProcessId}{\void}
+
+Returns the number uniquely identifying the current process in the system.
+
+If an error occurs, $0$ is returned.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxShell}\label{wxshell}
+
+\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
+
+Executes a command in an interactive shell window. If no command is
+specified, then just the shell is spawned.
+
+See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxShutdown}\label{wxshutdown}
+
+\func{bool}{wxShutdown}{\param{wxShutdownFlags}{flags}}
+
+This function shuts down or reboots the computer depending on the value of the
+{\it flags}. Please notice that doing this requires the corresponding access
+rights (superuser under Unix, {\tt SE\_SHUTDOWN} privilege under Windows NT)
+and that this function is only implemented under Unix and Win32.
+
+\wxheading{Parameters}
+
+\docparam{flags}{Either {\tt wxSHUTDOWN\_POWEROFF} or {\tt wxSHUTDOWN\_REBOOT}}
+
+\wxheading{Returns}
+
+\true on success, \false if an error occurred.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+
+\section{Thread functions}\label{threadfunctions}
+
+The functions and macros here mainly exist to make it writing the code which
+may be compiled in multi thread build ({\tt wxUSE\_THREADS} $= 1$) as well as
+in single thread configuration ({\tt wxUSE\_THREADS} $= 0$).
+
+For example, a static variable must be protected against simultaneous access by
+multiple threads in the former configuration but in the latter the extra
+overhead of using the critical section is not needed. To solve this problem,
+the \helpref{wxCRITICAL\_SECTION}{wxcriticalsectionmacro} macro may be used
+to create and use the critical section only when needed.
+
+\wxheading{Include files}
+
+<wx/thread.h>
+
+\wxheading{See also}
+
+\helpref{wxThread}{wxthread}, \helpref{wxMutex}{wxmutex}, \helpref{Multithreading overview}{wxthreadoverview}
+
+
+
+\membersection{wxCRIT\_SECT\_DECLARE}\label{wxcritsectdeclare}
+
+\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
+
+This macro declares a (static) critical section object named {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{wxCRIT\_SECT\_DECLARE\_MEMBER}\label{wxcritsectdeclaremember}
+
+\func{}{wxCRIT\_SECT\_DECLARE}{\param{}{cs}}
+
+This macro declares a critical section object named {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$. As it doesn't
+include the {\tt static} keyword (unlike
+\helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare}), it can be used to declare
+a class or struct member which explains its name.
+
+
+
+\membersection{wxCRIT\_SECT\_LOCKER}\label{wxcritsectlocker}
+
+\func{}{wxCRIT\_SECT\_LOCKER}{\param{}{name}, \param{}{cs}}
+
+This macro creates a \helpref{critical section lock}{wxcriticalsectionlocker}
+object named {\it name} and associated with the critical section {\it cs} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{wxCRITICAL\_SECTION}\label{wxcriticalsectionmacro}
+
+\func{}{wxCRITICAL\_SECTION}{\param{}{name}}
+
+This macro combines \helpref{wxCRIT\_SECT\_DECLARE}{wxcritsectdeclare} and
+\helpref{wxCRIT\_SECT\_LOCKER}{wxcritsectlocker}: it creates a static critical
+section object and also the lock object associated with it. Because of this, it
+can be only used inside a function, not at global scope. For example:
+
+\begin{verbatim}
+int IncCount()
+{
+ static int s_counter = 0;
+
+ wxCRITICAL_SECTION(counter);
+
+ return ++s_counter;
+}
+\end{verbatim}
+
+(note that we suppose that the function is called the first time from the main
+thread so that the critical section object is initialized correctly by the time
+other threads start calling it, if this is not the case this approach can
+{\bf not} be used and the critical section must be made a global instead).
+
+
+
+\membersection{wxENTER\_CRIT\_SECT}\label{wxentercritsect}
+
+\func{}{wxENTER\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
+
+This macro is equivalent to \helpref{cs.Enter()}{wxcriticalsectionenter} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{::wxIsMainThread}\label{wxismainthread}
+
+\func{bool}{wxIsMainThread}{\void}
+
+Returns \true if this thread is the main one. Always returns \true if
+{\tt wxUSE\_THREADS} is $0$.
+
+
+
+\membersection{wxLEAVE\_CRIT\_SECT}\label{wxleavecritsect}
+
+\func{}{wxLEAVE\_CRIT\_SECT}{\param{wxCriticalSection\& }{cs}}
+
+This macro is equivalent to \helpref{cs.Leave()}{wxcriticalsectionleave} if
+{\tt wxUSE\_THREADS} is $1$ and does nothing if it is $0$.
+
+
+
+\membersection{::wxMutexGuiEnter}\label{wxmutexguienter}
+
+\func{void}{wxMutexGuiEnter}{\void}
+
+This function must be called when any thread other than the main GUI thread
+wants to get access to the GUI library. This function will block the execution
+of the calling thread until the main thread (or any other thread holding the
+main GUI lock) leaves the GUI library and no other thread will enter the GUI
+library until the calling thread calls \helpref{::wxMutexGuiLeave()}{wxmutexguileave}.
+
+Typically, these functions are used like this:
+
+\begin{verbatim}
+void MyThread::Foo(void)
+{
+ // before doing any GUI calls we must ensure that this thread is the only
+ // one doing it!
+
+ wxMutexGuiEnter();
+
+ // Call GUI here:
+ my_window->DrawSomething();
+
+ wxMutexGuiLeave();
+}
+\end{verbatim}
+
+Note that under GTK, no creation of top-level windows is allowed in any
+thread but the main one.
+
+This function is only defined on platforms which support preemptive
+threads.
+
+
+\membersection{::wxMutexGuiLeave}\label{wxmutexguileave}
+
+\func{void}{wxMutexGuiLeave}{\void}
+
+See \helpref{::wxMutexGuiEnter()}{wxmutexguienter}.
+
+This function is only defined on platforms which support preemptive
+threads.
+
+
+
+\section{File functions}\label{filefunctions}
+
+\wxheading{Include files}
+
+<wx/filefn.h>
+
+\wxheading{See also}
+
+\helpref{wxPathList}{wxpathlist}\\
+\helpref{wxDir}{wxdir}\\
+\helpref{wxFile}{wxfile}\\
+\helpref{wxFileName}{wxfilename}
+
+
+\membersection{::wxDos2UnixFilename}\label{wxdos2unixfilename}
+
+\func{void}{wxDos2UnixFilename}{\param{wxChar *}{s}}
+
+Converts a DOS to a Unix filename by replacing backslashes with forward
+slashes.
+
+
+\membersection{::wxFileExists}\label{functionwxfileexists}
+
+\func{bool}{wxFileExists}{\param{const wxString\& }{filename}}
+
+Returns true if the file exists and is a plain file.
+
+
+\membersection{::wxFileModificationTime}\label{wxfilemodificationtime}
+
+\func{time\_t}{wxFileModificationTime}{\param{const wxString\& }{filename}}
+
+Returns time of last modification of given file.
+
+The function returns \texttt{(time\_t)}$-1$ if an error occurred (e.g. file not
+found).
+
+
+\membersection{::wxFileNameFromPath}\label{wxfilenamefrompath}
+
+\func{wxString}{wxFileNameFromPath}{\param{const wxString\& }{path}}
+
+\func{char *}{wxFileNameFromPath}{\param{char *}{path}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxFileName::SplitPath}{wxfilenamesplitpath} instead.
+
+Returns the filename for a full path. The second form returns a pointer to
+temporary storage that should not be deallocated.
+
+
+\membersection{::wxFindFirstFile}\label{wxfindfirstfile}
+
+\func{wxString}{wxFindFirstFile}{\param{const wxString\& }{spec}, \param{int}{ flags = 0}}
+
+This function does directory searching; returns the first file
+that matches the path {\it spec}, or the empty string. Use \helpref{wxFindNextFile}{wxfindnextfile} to
+get the next matching file. Neither will report the current directory "." or the
+parent directory "..".
+
+\wxheading{Warning}
+
+As of wx 2.5.2, these functions are not thread-safe! (they use static variables). You probably want to use \helpref{wxDir::GetFirst}{wxdirgetfirst} or \helpref{wxDirTraverser}{wxdirtraverser} instead.
+
+{\it spec} may contain wildcards.
+
+{\it flags} may be wxDIR for restricting the query to directories, wxFILE for files or zero for either.
+
+For example:
+
+\begin{verbatim}
+ wxString f = wxFindFirstFile("/home/project/*.*");
+ while ( !f.empty() )
+ {
+ ...
+ f = wxFindNextFile();
+ }
+\end{verbatim}
+
+
+\membersection{::wxFindNextFile}\label{wxfindnextfile}
+
+\func{wxString}{wxFindNextFile}{\void}
+
+Returns the next file that matches the path passed to \helpref{wxFindFirstFile}{wxfindfirstfile}.
+
+See \helpref{wxFindFirstFile}{wxfindfirstfile} for an example.
+
+
+\membersection{::wxGetDiskSpace}\label{wxgetdiskspace}
+
+\func{bool}{wxGetDiskSpace}{\param{const wxString\& }{path}, \param{wxLongLong }{*total = NULL}, \param{wxLongLong }{*free = NULL}}
+
+This function returns the total number of bytes and number of free bytes on
+the disk containing the directory {\it path} (it should exist). Both
+{\it total} and {\it free} parameters may be {\tt NULL} if the corresponding
+information is not needed.
+
+\wxheading{Returns}
+
+\true on success, \false if an error occurred (for example, the
+directory doesn't exist).
+
+\wxheading{Portability}
+
+The generic Unix implementation depends on the system having
+the \texttt{statfs()} or \texttt{statvfs()} function.
+
+This function first appeared in wxWidgets 2.3.2.
+
+
+\membersection{::wxGetFileKind}\label{wxgetfilekind}
+
+\func{wxFileKind}{wxGetFileKind}{\param{int }{fd}}
+
+\func{wxFileKind}{wxGetFileKind}{\param{FILE *}{fp}}
+
+Returns the type of an open file. Possible return values are:
+
+\begin{verbatim}
+enum wxFileKind
+{
+ wxFILE_KIND_UNKNOWN,
+ wxFILE_KIND_DISK, // a file supporting seeking to arbitrary offsets
+ wxFILE_KIND_TERMINAL, // a tty
+ wxFILE_KIND_PIPE // a pipe
+};
+
+\end{verbatim}
+
+\wxheading{Include files}
+
+<wx/filefn.h>
+
+
+\membersection{::wxGetOSDirectory}\label{wxgetosdirectory}
+
+\func{wxString}{wxGetOSDirectory}{\void}
+
+Returns the Windows directory under Windows; on other platforms returns the empty string.
+
+
+\membersection{::wxIsAbsolutePath}\label{wxisabsolutepath}
+
+\func{bool}{wxIsAbsolutePath}{\param{const wxString\& }{filename}}
+
+Returns true if the argument is an absolute filename, i.e. with a slash
+or drive name at the beginning.
+
+
+\membersection{::wxDirExists}\label{functionwxdirexists}
+
+\func{bool}{wxDirExists}{\param{const wxString\& }{dirname}}
+
+Returns true if \arg{dirname} exists and is a directory.
+
+
+\membersection{::wxPathOnly}\label{wxpathonly}
+
+\func{wxString}{wxPathOnly}{\param{const wxString\& }{path}}
+
+Returns the directory part of the filename.
+
+
+\membersection{::wxUnix2DosFilename}\label{wxunix2dosfilename}
+
+\func{void}{wxUnix2DosFilename}{\param{wxChar *}{s}}
+
+This function is deprecated, use \helpref{wxFileName}{wxfilename} instead.
+
+Converts a Unix to a DOS filename by replacing forward
+slashes with backslashes.
+
+
+\membersection{wxCHANGE\_UMASK}\label{wxchangeumask}
+
+\func{}{wxCHANGE\_UMASK}{\param{int }{mask}}
+
+Under Unix this macro changes the current process umask to the given value,
+unless it is equal to $-1$ in which case nothing is done, and restores it to
+the original value on scope exit. It works by declaring a variable which sets
+umask to \arg{mask} in its constructor and restores it in its destructor.
+
+Under other platforms this macro expands to nothing.
+
+
+\membersection{::wxConcatFiles}\label{wxconcatfiles}
+
+\func{bool}{wxConcatFiles}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2},
+\param{const wxString\& }{file3}}
+
+Concatenates {\it file1} and {\it file2} to {\it file3}, returning
+true if successful.
+
+
+\membersection{::wxCopyFile}\label{wxcopyfile}
+
+\func{bool}{wxCopyFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
+
+Copies {\it file1} to {\it file2}, returning true if successful. If
+{\it overwrite} parameter is \true (default), the destination file is overwritten
+if it exists, but if {\it overwrite} is \false, the functions fails in this
+case.
+
+This function supports resources forks under Mac OS.
+
+
+\membersection{::wxGetCwd}\label{wxgetcwd}
+
+\func{wxString}{wxGetCwd}{\void}
+
+Returns a string containing the current (or working) directory.
+
+
+\membersection{::wxGetWorkingDirectory}\label{wxgetworkingdirectory}
+
+\func{wxString}{wxGetWorkingDirectory}{\param{char *}{buf=NULL}, \param{int }{sz=1000}}
+
+{\bf NB:} This function is deprecated: use \helpref{wxGetCwd}{wxgetcwd} instead.
+
+Copies the current working directory into the buffer if supplied, or
+copies the working directory into new storage (which you {\emph must} delete
+yourself) if the buffer is NULL.
+
+{\it sz} is the size of the buffer if supplied.
+
+
+\membersection{::wxGetTempFileName}\label{wxgettempfilename}
+
+\func{char *}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{char *}{buf=NULL}}
+
+\func{bool}{wxGetTempFileName}{\param{const wxString\& }{prefix}, \param{wxString\& }{buf}}
+
+%% Makes a temporary filename based on {\it prefix}, opens and closes the file,
+%% and places the name in {\it buf}. If {\it buf} is NULL, new store
+%% is allocated for the temporary filename using {\it new}.
+%%
+%% Under Windows, the filename will include the drive and name of the
+%% directory allocated for temporary files (usually the contents of the
+%% TEMP variable). Under Unix, the {\tt /tmp} directory is used.
+%%
+%% It is the application's responsibility to create and delete the file.
+
+{\bf NB:} These functions are obsolete, please use\rtfsp
+\helpref{wxFileName::CreateTempFileName}{wxfilenamecreatetempfilename}\rtfsp
+instead.
+
+
+\membersection{::wxIsWild}\label{wxiswild}
+
+\func{bool}{wxIsWild}{\param{const wxString\& }{pattern}}
+
+Returns true if the pattern contains wildcards. See \helpref{wxMatchWild}{wxmatchwild}.
+
+
+\membersection{::wxMatchWild}\label{wxmatchwild}
+
+\func{bool}{wxMatchWild}{\param{const wxString\& }{pattern}, \param{const wxString\& }{text}, \param{bool}{ dot\_special}}
+
+Returns true if the \arg{pattern}\/ matches the {\it text}\/; if {\it
+dot\_special}\/ is true, filenames beginning with a dot are not matched
+with wildcard characters. See \helpref{wxIsWild}{wxiswild}.
+
+
+\membersection{::wxMkdir}\label{wxmkdir}
+
+\func{bool}{wxMkdir}{\param{const wxString\& }{dir}, \param{int }{perm = 0777}}
+
+Makes the directory \arg{dir}, returning true if successful.
+
+{\it perm} is the access mask for the directory for the systems on which it is
+supported (Unix) and doesn't have any effect on the other ones.
+
+
+\membersection{::wxParseCommonDialogsFilter}\label{wxparsecommondialogsfilter}
+
+\func{int}{wxParseCommonDialogsFilter}{\param{const wxString\& }{wildCard}, \param{wxArrayString\& }{descriptions}, \param{wxArrayString\& }{filters}}
+
+Parses the \arg{wildCard}, returning the number of filters.
+Returns 0 if none or if there's a problem.
+The arrays will contain an equal number of items found before the error.
+On platforms where native dialogs handle only one filter per entry,
+entries in arrays are automatically adjusted.
+\arg{wildCard} is in the form:
+\begin{verbatim}
+ "All files (*)|*|Image Files (*.jpeg *.png)|*.jpg;*.png"
+\end{verbatim}
+
+\membersection{::wxRemoveFile}\label{wxremovefile}
+
+\func{bool}{wxRemoveFile}{\param{const wxString\& }{file}}
+
+Removes \arg{file}, returning true if successful.
+
+
+\membersection{::wxRenameFile}\label{wxrenamefile}
+
+\func{bool}{wxRenameFile}{\param{const wxString\& }{file1}, \param{const wxString\& }{file2}, \param{bool }{overwrite = true}}
+
+Renames \arg{file1} to \arg{file2}, returning true if successful.
+
+If \arg{overwrite} parameter is true (default), the destination file is
+overwritten if it exists, but if \arg{overwrite} is false, the functions fails
+in this case.
+
+
+\membersection{::wxRmdir}\label{wxrmdir}
+
+\func{bool}{wxRmdir}{\param{const wxString\& }{dir}, \param{int}{ flags=0}}
+
+Removes the directory {\it dir}, returning true if successful. Does not work under VMS.
+
+The {\it flags} parameter is reserved for future use.
+
+Please notice that there is also a wxRmDir() function which simply wraps the
+standard POSIX rmdir() function and so return an integer error code instead of
+a boolean value (but otherwise is currently identical to wxRmdir), don't
+confuse these two functions.
+
+
+\membersection{::wxSetWorkingDirectory}\label{wxsetworkingdirectory}
+
+\func{bool}{wxSetWorkingDirectory}{\param{const wxString\& }{dir}}
+
+Sets the current working directory, returning true if the operation succeeded.
+Under MS Windows, the current drive is also changed if {\it dir} contains a drive specification.
+
+
+\membersection{::wxSplit}\label{wxsplit}
+
+\func{wxArrayString}{wxSplit}{\param{const wxString\&}{ str}, \param{const wxChar}{ sep}, \param{const wxChar}{ escape = '\\'}}
+
+Splits the given \helpref{wxString}{wxstring} object using the separator \arg{sep} and returns the
+result as a \helpref{wxArrayString}{wxarraystring}.
+
+If the \arg{escape} character is non-\NULL, then the occurrences of \arg{sep} immediately prefixed
+with \arg{escape} are not considered as separators.
+
+Note that empty tokens will be generated if there are two or more adjacent separators.
+
+\wxheading{See also}
+
+\helpref{wxJoin}{wxjoin}
+
+\wxheading{Include files}
+
+<wx/arrstr.h>
+
+
+\membersection{::wxSplitPath}\label{wxsplitfunction}
+
+\func{void}{wxSplitPath}{\param{const wxString\&}{ fullname}, \param{wxString *}{ path}, \param{wxString *}{ name}, \param{wxString *}{ ext}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxFileName::SplitPath}{wxfilenamesplitpath} instead.
+
+This function splits a full file name into components: the path (including possible disk/drive
+specification under Windows), the base name and the extension. Any of the output parameters
+({\it path}, {\it name} or {\it ext}) may be NULL if you are not interested in the value of
+a particular component.
+
+wxSplitPath() will correctly handle filenames with both DOS and Unix path separators under
+Windows, however it will not consider backslashes as path separators under Unix (where backslash
+is a valid character in a filename).
+
+On entry, {\it fullname} should be non-NULL (it may be empty though).
+
+On return, {\it path} contains the file path (without the trailing separator), {\it name}
+contains the file name and {\it ext} contains the file extension without leading dot. All
+three of them may be empty if the corresponding component is. The old contents of the
+strings pointed to by these parameters will be overwritten in any case (if the pointers
+are not NULL).
+
+
+\membersection{::wxTransferFileToStream}\label{wxtransferfiletostream}
+
+\func{bool}{wxTransferFileToStream}{\param{const wxString\& }{filename}, \param{ostream\& }{stream}}
+
+Copies the given file to {\it stream}. Useful when converting an old application to
+use streams (within the document/view framework, for example).
+
+\wxheading{Include files}
+
+<wx/docview.h>
+
+
+\membersection{::wxTransferStreamToFile}\label{wxtransferstreamtofile}
+
+\func{bool}{wxTransferStreamToFile}{\param{istream\& }{stream} \param{const wxString\& }{filename}}
+
+Copies the given stream to the file {\it filename}. Useful when converting an old application to
+use streams (within the document/view framework, for example).
+
+\wxheading{Include files}
+
+<wx/docview.h>
+
+
+
+\section{Network, user and OS functions}\label{networkfunctions}
+
+The functions in this section are used to retrieve information about the
+current computer and/or user characteristics.
+
+
+\membersection{::wxGetEmailAddress}\label{wxgetemailaddress}
+
+\func{wxString}{wxGetEmailAddress}{\void}
+
+\func{bool}{wxGetEmailAddress}{\param{char * }{buf}, \param{int }{sz}}
+
+Copies the user's email address into the supplied buffer, by
+concatenating the values returned by \helpref{wxGetFullHostName}{wxgetfullhostname}\rtfsp
+and \helpref{wxGetUserId}{wxgetuserid}.
+
+Returns true if successful, false otherwise.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+
+\func{wxMemorySize}{wxGetFreeMemory}{\void}
+
+Returns the amount of free memory in bytes under environments which
+support it, and -1 if not supported or failed to perform measurement.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetFullHostName}\label{wxgetfullhostname}
+
+\func{wxString}{wxGetFullHostName}{\void}
+
+Returns the FQDN (fully qualified domain host name) or an empty string on
+error.
+
+\wxheading{See also}
+
+\helpref{wxGetHostName}{wxgethostname}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetHomeDir}\label{wxgethomedir}
+
+\func{wxString}{wxGetHomeDir}{\void}
+
+Return the (current) user's home directory.
+
+\wxheading{See also}
+
+\helpref{wxGetUserHome}{wxgetuserhome}\\
+\helpref{wxStandardPaths}{wxstandardpaths}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetHostName}\label{wxgethostname}
+
+\func{wxString}{wxGetHostName}{\void}
\func{bool}{wxGetHostName}{\param{char * }{buf}, \param{int }{sz}}
Under Windows or NT, this function first looks in the environment
variable SYSTEM\_NAME; if this is not found, the entry {\bf HostName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+in the {\bf wxWidgets} section of the WIN.INI file is tried.
The first variant of this function returns the hostname if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+empty string otherwise. The second (deprecated) function returns true
+if successful, false otherwise.
\wxheading{See also}
<wx/utils.h>
-\section{User identification}\label{useridfunctions}
+
+\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+
+\func{wxString}{wxGetOsDescription}{\void}
+
+Returns the string containing the description of the current platform in a
+user-readable form. For example, this function may return strings like
+{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+
+\wxheading{See also}
+
+\helpref{::wxGetOsVersion}{wxgetosversion}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetOsVersion}\label{wxgetosversion}
+
+\func{wxOperatingSystemId}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
+
+Gets the version and the operating system ID for currently running OS.
+See \helpref{wxPlatformInfo}{wxplatforminfo} for more details about wxOperatingSystemId.
+
+\wxheading{See also}
+
+\helpref{::wxGetOsDescription}{wxgetosdescription},
+\helpref{wxPlatformInfo}{wxplatforminfo}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxIsPlatformLittleEndian}\label{wxisplatformlittleendian}
+
+\func{bool}{wxIsPlatformLittleEndian}{\void}
+
+Returns \true if the current platform is little endian (instead of big endian).
+The check is performed at run-time.
+
+\wxheading{See also}
+
+\helpref{Byte order macros}{byteordermacros}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxIsPlatform64Bit}\label{wxisplatform64bit}
+
+\func{bool}{wxIsPlatform64Bit}{\void}
+
+Returns \true if the operating system the program is running under is 64 bit.
+The check is performed at run-time and may differ from the value available at
+compile-time (at compile-time you can just check if {\tt sizeof(void*)==8})
+since the program could be running in emulation mode or in a mixed 32/64 bit system
+(bi-architecture operating system).
+
+Very important: this function is not 100\% reliable on some systems given the fact
+that there isn't always a standard way to do a reliable check on the OS architecture.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetUserHome}\label{wxgetuserhome}
+
+\func{wxString}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+
+Returns the home directory for the given user. If the \arg{user} is empty
+(default value), this function behaves like
+\helpref{wxGetHomeDir}{wxgethomedir} i.e. returns the current user home
+directory.
+
+If the home directory couldn't be determined, an empty string is returned.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
\membersection{::wxGetUserId}\label{wxgetuserid}
This function returns the "user id" also known as "login name" under Unix i.e.
something like "jsmith". It uniquely identifies the current user (on this system).
-Under Windows or NT, this function first looks in the environment
-variables USER and LOGNAME; if neither of these is found, the entry {\bf UserId}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file is tried.
+Under Windows or NT, this function first looks in the environment
+variables USER and LOGNAME; if neither of these is found, the entry {\bf UserId}\rtfsp
+in the {\bf wxWidgets} section of the WIN.INI file is tried.
+
+The first variant of this function returns the login name if successful or an
+empty string otherwise. The second (deprecated) function returns true
+if successful, false otherwise.
+
+\wxheading{See also}
+
+\helpref{wxGetUserName}{wxgetusername}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGetUserName}\label{wxgetusername}
+
+\func{wxString}{wxGetUserName}{\void}
+
+\func{bool}{wxGetUserName}{\param{char * }{buf}, \param{int }{sz}}
+
+This function returns the full user name (something like "Mr. John Smith").
+
+Under Windows or NT, this function looks for the entry {\bf UserName}\rtfsp
+in the {\bf wxWidgets} section of the WIN.INI file. If PenWindows
+is running, the entry {\bf Current} in the section {\bf User} of
+the PENWIN.INI file is used.
+
+The first variant of this function returns the user name if successful or an
+empty string otherwise. The second (deprecated) function returns \true
+if successful, \false otherwise.
+
+\wxheading{See also}
+
+\helpref{wxGetUserId}{wxgetuserid}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+
+\section{String functions}\label{stringfunctions}
+
+\membersection{::wxGetTranslation}\label{wxgettranslation}
+
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str},
+ \param{const wxString\& }{domain = wxEmptyString}}
+
+\func{const wxString\& }{wxGetTranslation}{\param{const wxString\& }{str}, \param{const wxString\& }{strPlural}, \param{size\_t }{n},
+ \param{const wxString\& }{domain = wxEmptyString}}
+
+This function returns the translation of string {\it str} in the current
+\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
+message catalogs (see \helpref{internationalization overview}{internationalization}), the
+original string is returned. In debug build, an error message is logged -- this
+should help to find the strings which were not yet translated. If
+{\it domain} is specified then only that domain/catalog is searched
+for a matching string. As this function
+is used very often, an alternative (and also common in Unix world) syntax is
+provided: the \helpref{\_()}{underscore} macro is defined to do the same thing
+as wxGetTranslation.
+
+The second form is used when retrieving translation of string that has
+different singular and plural form in English or different plural forms in some
+other language. It takes two extra arguments: as above, \arg{str}
+parameter must contain the singular form of the string to be converted and
+is used as the key for the search in the catalog. The \arg{strPlural} parameter
+is the plural form (in English). The parameter \arg{n} is used to determine the
+plural form. If no message catalog is found \arg{str} is returned if `n == 1',
+otherwise \arg{strPlural}.
+
+See \urlref{GNU gettext manual}{http://www.gnu.org/manual/gettext/html\_chapter/gettext\_10.html\#SEC150}
+for additional information on plural forms handling. For a shorter alternative
+see the \helpref{wxPLURAL()}{wxplural} macro.
+
+Both versions call \helpref{wxLocale::GetString}{wxlocalegetstring}.
+
+Note that this function is not suitable for literal strings in Unicode
+builds, since the literal strings must be enclosed into
+\helpref{\_T()}{underscoret} or \helpref{wxT}{wxt} macro which makes them
+unrecognised by \texttt{xgettext}, and so they are not extracted to the message
+catalog. Instead, use the \helpref{\_()}{underscore} and
+\helpref{wxPLURAL}{wxplural} macro for all literal strings.
+
+
+\membersection{::wxIsEmpty}\label{wxisempty}
+
+\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
+
+Returns \true if the pointer is either {\tt NULL} or points to an empty
+string, \false otherwise.
+
+
+\membersection{::wxStrcmp}\label{wxstrcmp}
+
+\func{int}{wxStrcmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+
+Returns a negative value, 0, or positive value if {\it p1} is less than, equal
+to or greater than {\it p2}. The comparison is case-sensitive.
+
+This function complements the standard C function {\it stricmp()} which performs
+case-insensitive comparison.
+
+
+\membersection{::wxStricmp}\label{wxstricmp}
+
+\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+
+Returns a negative value, 0, or positive value if {\it p1} is less than, equal
+to or greater than {\it p2}. The comparison is case-insensitive.
+
+This function complements the standard C function {\it strcmp()} which performs
+case-sensitive comparison.
+
+
+\membersection{::wxStringEq}\label{wxstringeq}
+
+\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+
+{\bf NB:} This function is obsolete, use \helpref{wxString}{wxstring} instead.
+
+A macro defined as:
+
+\begin{verbatim}
+#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
+\end{verbatim}
+
+
+\membersection{::wxStringMatch}\label{wxstringmatch}
+
+\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
+ \param{bool}{ subString = true}, \param{bool}{ exact = false}}
+
+{\bf NB:} This function is obsolete, use \helpref{wxString::Find}{wxstringfind} instead.
+
+Returns \true if the substring {\it s1} is found within {\it s2},
+ignoring case if {\it exact} is false. If {\it subString} is \false,
+no substring matching is done.
+
+
+\membersection{::wxStringTokenize}\label{wxstringtokenize}
+
+\func{wxArrayString}{wxStringTokenize}{\param{const wxString\& }{str},\\
+ \param{const wxString\& }{delims = wxDEFAULT\_DELIMITERS},\\
+ \param{wxStringTokenizerMode }{mode = wxTOKEN\_DEFAULT}}
+
+This is a convenience function wrapping
+\helpref{wxStringTokenizer}{wxstringtokenizer} which simply returns all tokens
+found in the given \arg{str} in an array.
+
+Please see
+\helpref{wxStringTokenizer::wxStringTokenizer}{wxstringtokenizerwxstringtokenizer}
+for the description of the other parameters.
+
+
+\membersection{::wxStrlen}\label{wxstrlen}
+
+\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
+
+This is a safe version of standard function {\it strlen()}: it does exactly the
+same thing (i.e. returns the length of the string) except that it returns 0 if
+{\it p} is the {\tt NULL} pointer.
+
+
+\membersection{::wxSnprintf}\label{wxsnprintf}
+
+\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
+
+This function replaces the dangerous standard function {\tt sprintf()} and is
+like {\tt snprintf()} available on some platforms. The only difference with
+sprintf() is that an additional argument - buffer size - is taken and the
+buffer is never overflowed.
+
+Returns the number of characters copied to the buffer or -1 if there is not
+enough space.
+
+\wxheading{See also}
+
+\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
+
+
+\membersection{wxT}\label{wxt}
+
+\func{wxChar}{wxT}{\param{char }{ch}}
+
+\func{const wxChar *}{wxT}{\param{const char *}{s}}
+
+wxT() is a macro which can be used with character and string literals (in other
+words, {\tt 'x'} or {\tt "foo"}) to automatically convert them to Unicode in
+Unicode build configuration. Please see the
+\helpref{Unicode overview}{unicode} for more information.
+
+This macro is simply returns the value passed to it without changes in ASCII
+build. In fact, its definition is:
+\begin{verbatim}
+#ifdef UNICODE
+#define wxT(x) L ## x
+#else // !Unicode
+#define wxT(x) x
+#endif
+\end{verbatim}
+
+
+\membersection{wxTRANSLATE}\label{wxtranslate}
+
+\func{const wxChar *}{wxTRANSLATE}{\param{const char *}{s}}
+
+This macro doesn't do anything in the program code -- it simply expands to the
+value of its argument.
+
+However it does have a purpose which is to mark the literal strings for the
+extraction into the message catalog created by {\tt xgettext} program. Usually
+this is achieved using \helpref{\_()}{underscore} but that macro not only marks
+the string for extraction but also expands into a
+\helpref{wxGetTranslation}{wxgettranslation} function call which means that it
+cannot be used in some situations, notably for static array
+initialization.
+
+Here is an example which should make it more clear: suppose that you have a
+static array of strings containing the weekday names and which have to be
+translated (note that it is a bad example, really, as
+\helpref{wxDateTime}{wxdatetime} already can be used to get the localized week
+day names already). If you write
+
+\begin{verbatim}
+static const char * const weekdays[] = { _("Mon"), ..., _("Sun") };
+...
+// use weekdays[n] as usual
+\end{verbatim}
+
+the code wouldn't compile because the function calls are forbidden in the array
+initializer. So instead you should do
+
+\begin{verbatim}
+static const char * const weekdays[] = { wxTRANSLATE("Mon"), ..., wxTRANSLATE("Sun") };
+...
+// use wxGetTranslation(weekdays[n])
+\end{verbatim}
-The first variant of this function returns the login name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
+here.
-\wxheading{See also}
+Note that although the code {\bf would} compile if you simply omit
+wxTRANSLATE() in the above, it wouldn't work as expected because there would be
+no translations for the weekday names in the program message catalog and
+wxGetTranslation wouldn't find them.
-\helpref{wxGetUserName}{wxgetusername}
-\wxheading{Include files}
+\membersection{::wxVsnprintf}\label{wxvsnprintf}
-<wx/utils.h>
+\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argPtr}}
-\membersection{::wxGetUserName}\label{wxgetusername}
+The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list }
+argument instead of arbitrary number of parameters.
-\func{wxString}{wxGetUserName}{\void}
+Note that if \texttt{wxUSE\_PRINTF\_POS\_PARAMS} is set to 1, then this function supports
+positional arguments (see \helpref{wxString::Printf}{wxstringprintf} for more information).
+However other functions of the same family (wxPrintf, wxSprintf, wxFprintf, wxVfprintf,
+wxVfprintf, wxVprintf, wxVsprintf) currently do not to support positional parameters
+even when \texttt{wxUSE\_PRINTF\_POS\_PARAMS} is 1.
-\func{bool}{wxGetUserName}{\param{char * }{buf}, \param{int }{sz}}
+\wxheading{See also}
-This function returns the full user name (something like "Mr. John Smith").
+\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
-Under Windows or NT, this function looks for the entry {\bf UserName}\rtfsp
-in the {\bf wxWindows} section of the WIN.INI file. If PenWindows
-is running, the entry {\bf Current} in the section {\bf User} of
-the PENWIN.INI file is used.
-The first variant of this function returns the user name if successful or an
-empty string otherwise. The second (deprecated) function returns TRUE
-if successful, FALSE otherwise.
-\wxheading{See also}
+\membersection{\_}\label{underscore}
-\helpref{wxGetUserId}{wxgetuserid}
+\func{const wxString\&}{\_}{\param{const wxString\&}{s}}
-\wxheading{Include files}
+This macro expands into a call to \helpref{wxGetTranslation}{wxgettranslation}
+function, so it marks the message for the extraction by {\tt xgettext} just as
+\helpref{wxTRANSLATE}{wxtranslate} does, but also returns the translation of
+the string for the current locale during execution.
-<wx/utils.h>
+Don't confuse this macro with \helpref{\_T()}{underscoret}!
-\section{String functions}
-\membersection{::copystring}
+\membersection{wxPLURAL}\label{wxplural}
-\func{char*}{copystring}{\param{const char* }{s}}
+\func{const wxString\&}{wxPLURAL}{\param{const wxString\&}{sing}, \param{const wxString\&}{plur}, \param{size\_t}{n}}
-Makes a copy of the string {\it s} using the C++ new operator, so it can be
-deleted with the {\it delete} operator.
+This macro is identical to \helpref{\_()}{underscore} but for the plural variant
+of \helpref{wxGetTranslation}{wxgettranslation}.
-\membersection{::wxIsEmpty}\label{wxisempty}
-\func{bool}{wxIsEmpty}{\param{const char *}{ p}}
+\membersection{\_T}\label{underscoret}
-Returns {\tt TRUE} if the pointer is either {\tt NULL} or points to an empty
-string, {\tt FALSE} otherwise.
+\func{wxChar}{\_T}{\param{char }{ch}}
-\membersection{::wxStricmp}\label{wxstricmp}
+\func{const wxChar *}{\_T}{\param{const wxChar }{ch}}
-\func{int}{wxStricmp}{\param{const char *}{p1}, \param{const char *}{p2}}
+This macro is exactly the same as \helpref{wxT}{wxt} and is defined in
+wxWidgets simply because it may be more intuitive for Windows programmers as
+the standard Win32 headers also define it (as well as yet another name for the
+same macro which is {\tt \_TEXT()}).
-Returns a negative value, 0, or positive value if {\it p1} is less than, equal
-to or greater than {\it p2}. The comparison is case-insensitive.
+Don't confuse this macro with \helpref{\_()}{underscore}!
-This function complements the standard C function {\it strcmp()} which performs
-case-sensitive comparison.
-\membersection{::wxStringMatch}
-\func{bool}{wxStringMatch}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2},\\
- \param{bool}{ subString = TRUE}, \param{bool}{ exact = FALSE}}
+\section{Dialog functions}\label{dialogfunctions}
-Returns {\tt TRUE} if the substring {\it s1} is found within {\it s2},
-ignoring case if {\it exact} is FALSE. If {\it subString} is {\tt FALSE},
-no substring matching is done.
+Below are a number of convenience functions for getting input from the
+user or displaying messages. Note that in these functions the last three
+parameters are optional. However, it is recommended to pass a parent frame
+parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
+the front when the dialog box is popped up.
-This function is obsolete, use \helpref{wxString::Find}{wxstringfind} instead.
-\membersection{::wxStringEq}\label{wxstringeq}
+\membersection{::wxAboutBox}\label{wxaboutbox}
-\func{bool}{wxStringEq}{\param{const wxString\& }{s1}, \param{const wxString\& }{s2}}
+\func{void}{wxAboutBox}{\param{const wxAboutDialogInfo\& }{info}}
-A macro defined as:
+This function shows the standard about dialog containing the information
+specified in \arg{info}. If the current platform has a native about dialog
+which is capable of showing all the fields in \arg{info}, the native dialog is
+used, otherwise the function falls back to the generic wxWidgets version of the
+dialog, i.e. does the same thing as \helpref{wxGenericAboutBox()}{wxgenericaboutbox}.
+Here is an example of how this function may be used:
\begin{verbatim}
-#define wxStringEq(s1, s2) (s1 && s2 && (strcmp(s1, s2) == 0))
-\end{verbatim}
-
-This function is obsolete, use \helpref{wxString}{wxstring} instead.
+void MyFrame::ShowSimpleAboutDialog(wxCommandEvent& WXUNUSED(event))
+{
+ wxAboutDialogInfo info;
+ info.SetName(_("My Program"));
+ info.SetVersion(_("1.2.3 Beta"));
+ info.SetDescription(_("This program does something great."));
+ info.SetCopyright(_T("(C) 2007 Me <my@email.addre.ss>"));
-\membersection{::wxStrlen}\label{wxstrlen}
+ wxAboutBox(info);
+}
+\end{verbatim}
-\func{size\_t}{wxStrlen}{\param{const char *}{ p}}
+Please see the \helpref{dialogs sample}{sampledialogs} for more examples of
+using this function and \helpref{wxAboutDialogInfo}{wxaboutdialoginfo} for the
+description of the information which can be shown in the about dialog.
-This is a safe version of standard function {\it strlen()}: it does exactly the
-same thing (i.e. returns the length of the string) except that it returns 0 if
-{\it p} is the {\tt NULL} pointer.
+\wxheading{Include files}
-\membersection{::wxGetTranslation}\label{wxgettranslation}
+<wx/aboutdlg.h>
-\func{const char *}{wxGetTranslation}{\param{const char * }{str}}
-This function returns the translation of string {\it str} in the current
-\helpref{locale}{wxlocale}. If the string is not found in any of the loaded
-message catalogs (see \helpref{internationalization overview}{internationalization}), the
-original string is returned. In debug build, an error message is logged - this
-should help to find the strings which were not yet translated. As this function
-is used very often, an alternative syntax is provided: the \_() macro is
-defined as wxGetTranslation().
+\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
-\membersection{::wxSnprintf}\label{wxsnprintf}
+\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
-\func{int}{wxSnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{}{...}}
+Changes the cursor to the given cursor for all windows in the application.
+Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
+to its previous state. These two calls can be nested, and a counter
+ensures that only the outer calls take effect.
-This function replaces the dangerous standard function {\tt sprintf()} and is
-like {\tt snprintf()} available on some platforms. The only difference with
-sprintf() is that an additional argument - buffer size - is taken and the
-buffer is never overflowed.
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-Returns the number of characters copied to the buffer or -1 if there is not
-enough space.
+\wxheading{Include files}
-\wxheading{See also}
+<wx/utils.h>
-\helpref{wxVsnprintf}{wxvsnprintf}, \helpref{wxString::Printf}{wxstringprintf}
-\membersection{::wxVsnprintf}\label{wxvsnprintf}
+\membersection{::wxBell}\label{wxbell}
-\func{int}{wxVsnprintf}{\param{wxChar *}{buf}, \param{size\_t }{len}, \param{const wxChar *}{format}, \param{va\_list }{argptr}}
+\func{void}{wxBell}{\void}
-The same as \helpref{wxSnprintf}{wxsnprintf} but takes a {\tt va\_list}
-argument instead of arbitrary number of parameters.
+Ring the system bell.
-\wxheading{See also}
+Note that this function is categorized as a GUI one and so is not thread-safe.
-\helpref{wxSnprintf}{wxsnprintf}, \helpref{wxString::PrintfV}{wxstringprintfv}
+\wxheading{Include files}
-\section{Dialog functions}\label{dialogfunctions}
+<wx/utils.h>
-Below are a number of convenience functions for getting input from the
-user or displaying messages. Note that in these functions the last three
-parameters are optional. However, it is recommended to pass a parent frame
-parameter, or (in MS Windows or Motif) the wrong window frame may be brought to
-the front when the dialog box is popped up.
\membersection{::wxCreateFileTipProvider}\label{wxcreatefiletipprovider}
<wx/tipdlg.h>
+
\membersection{::wxDirSelector}\label{wxdirselector}
\func{wxString}{wxDirSelector}{\param{const wxString\& }{message = wxDirSelectorPromptStr},\\
<wx/dirdlg.h>
+
\membersection{::wxFileSelector}\label{wxfileselector}
\func{wxString}{wxFileSelector}{\param{const wxString\& }{message}, \param{const wxString\& }{default\_path = ""},\\
\param{const wxString\& }{default\_filename = ""}, \param{const wxString\& }{default\_extension = ""},\\
- \param{const wxString\& }{wildcard = ``*.*''}, \param{int }{flags = 0}, \param{wxWindow *}{parent = ""},\\
+ \param{const wxString\& }{wildcard = "*.*"}, \param{int }{flags = 0}, \param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1}}
Pops up a file selector box. In Windows, this is the common file selector
If path is empty, the current directory will be used. If filename is empty,
no default filename will be supplied. The wildcard determines what files
are displayed in the file selector, and file extension supplies a type
-extension for the required filename. Flags may be a combination of wxOPEN,
-wxSAVE, wxOVERWRITE\_PROMPT, wxHIDE\_READONLY, wxFILE\_MUST\_EXIST, wxMULTIPLE or 0.
+extension for the required filename. Flags may be a combination of wxFD\_OPEN,
+wxFD\_SAVE, wxFD\_OVERWRITE\_PROMPT or wxFD\_FILE\_MUST\_EXIST. Note that wxFD\_MULTIPLE
+can only be used with \helpref{wxFileDialog}{wxfiledialog} and not here as this
+function only returns a single file name.
Both the Unix and Windows versions implement a wildcard filter. Typing a
filename containing wildcards (*, ?) in the filename text item, and
Cancel). For example:
\begin{verbatim}
-const wxString& s = wxFileSelector("Choose a file to open");
-if (s)
+wxString filename = wxFileSelector("Choose a file to open");
+if ( !filename.empty() )
{
- ...
+ // work with the file
+ ...
}
+//else: cancelled by user
\end{verbatim}
\wxheading{Include files}
<wx/filedlg.h>
+
+\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
+
+\func{void}{wxEndBusyCursor}{\void}
+
+Changes the cursor back to the original cursor, for all windows in the application.
+Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
+
+See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxGenericAboutBox}\label{wxgenericaboutbox}
+
+\func{void}{wxGenericAboutBox}{\param{const wxAboutDialogInfo\& }{info}}
+
+This function does the same thing as \helpref{wxAboutBox}{wxaboutbox} except
+that it always uses the generic wxWidgets version of the dialog instead of the
+native one. This is mainly useful if you need to customize the dialog by e.g.
+adding custom controls to it (customizing the native dialog is not currently
+supported).
+
+See the \helpref{dialogs sample}{sampledialogs} for an example of about dialog
+customization.
+
+\wxheading{See also}
+
+\helpref{wxAboutDialogInfo}{wxaboutdialoginfo}
+
+\wxheading{Include files}
+
+<wx/aboutdlg.h>\\
+<wx/generic/aboutdlgg.h>
+
+
\membersection{::wxGetColourFromUser}\label{wxgetcolourfromuser}
-\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}}
+\func{wxColour}{wxGetColourFromUser}{\param{wxWindow *}{parent}, \param{const wxColour\& }{colInit}, \param{const wxString\& }{caption = wxEmptyString}, \param{wxColourData *}{data = \NULL}}
Shows the colour selection dialog and returns the colour selected by user or
-invalid colour (use \helpref{wxColour::Ok}{wxcolourok} to test whether a colour
+invalid colour (use \helpref{wxColour:IsOk}{wxcolourisok} to test whether a colour
is valid) if the dialog was cancelled.
\wxheading{Parameters}
\docparam{colInit}{If given, this will be the colour initially selected in the dialog.}
+\docparam{caption}{If given, this will be used for the dialog caption.}
+
+\docparam{data}{Optional object storing additional colour dialog settings, such
+as custom colours. If none is provided the same settings as the last time are
+used.}
+
\wxheading{Include files}
<wx/colordlg.h>
+
+\membersection{::wxGetFontFromUser}\label{wxgetfontfromuser}
+
+\func{wxFont}{wxGetFontFromUser}{\param{wxWindow *}{parent}, \param{const wxFont\& }{fontInit}, \param{const wxString\& }{caption = wxEmptyString}}
+
+Shows the font selection dialog and returns the font selected by user or
+invalid font (use \helpref{wxFont:IsOk}{wxfontisok} to test whether a font
+is valid) if the dialog was cancelled.
+
+\wxheading{Parameters}
+
+\docparam{parent}{The parent window for the font selection dialog}
+
+\docparam{fontInit}{If given, this will be the font initially selected in the dialog.}
+
+\docparam{caption}{If given, this will be used for the dialog caption.}
+
+\wxheading{Include files}
+
+<wx/fontdlg.h>
+
+
+
\membersection{::wxGetMultipleChoices}\label{wxgetmultiplechoices}
\func{size\_t}{wxGetMultipleChoices}{\\
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
\func{size\_t}{wxGetMultipleChoices}{\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
Pops up a dialog box containing a message, OK/Cancel buttons and a
which is an array of {\it n} strings for the listbox or by using a single
{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-If {\it centre} is TRUE, the message text (which may include new line
-characters) is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line
+characters) is centred; if false, the message is left-justified.
\wxheading{Include files}
and {\tt choices}, and no {\tt selections} parameter; the function
returns an array containing the user selections.}
+
\membersection{::wxGetNumberFromUser}\label{wxgetnumberfromuser}
\func{long}{wxGetNumberFromUser}{
\wxheading{Include files}
-<wx/textdlg.h>
+<wx/numdlg.h>
+
\membersection{::wxGetPasswordFromUser}\label{wxgetpasswordfromuser}
-\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
- \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL}}
+\func{wxString}{wxGetPasswordFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
+ \param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Similar to \helpref{wxGetTextFromUser}{wxgettextfromuser} but the text entered
in the dialog is not shown on screen but replaced with stars. This is intended
<wx/textdlg.h>
+
\membersection{::wxGetTextFromUser}\label{wxgettextfromuser}
\func{wxString}{wxGetTextFromUser}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Input text"},\\
\param{const wxString\& }{default\_value = ``"}, \param{wxWindow *}{parent = NULL},\\
- \param{int}{ x = -1}, \param{int}{ y = -1}, \param{bool}{ centre = TRUE}}
+ \param{int}{ x = wxDefaultCoord}, \param{int}{ y = wxDefaultCoord}, \param{bool}{ centre = true}}
Pop up a dialog box with title set to {\it caption}, {\it message}, and a
\rtfsp{\it default\_value}. The user may type in text and press OK to return this text,
or press Cancel to return the empty string.
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line characters)
+is centred; if false, the message is left-justified.
\wxheading{Include files}
<wx/textdlg.h>
-\membersection{::wxGetMultipleChoice}\label{wxgetmultiplechoice}
-
-\func{int}{wxGetMultipleChoice}{\param{const wxString\& }{message}, \param{const wxString\& }{caption}, \param{int}{ n}, \param{const wxString\& }{choices[]},\\
- \param{int }{nsel}, \param{int *}{selection},
- \param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
-
-Pops up a dialog box containing a message, OK/Cancel buttons and a multiple-selection
-listbox. The user may choose one or more item(s) and press OK or Cancel.
-
-The number of initially selected choices, and array of the selected indices,
-are passed in; this array will contain the user selections on exit, with
-the function returning the number of selections. {\it selection} must be
-as big as the number of choices, in case all are selected.
-
-If Cancel is pressed, -1 is returned.
-
-{\it choices} is an array of {\it n} strings for the listbox.
-
-If {\it centre} is TRUE, the message text (which may include new line characters)
-is centred; if FALSE, the message is left-justified.
-
-\wxheading{Include files}
-
-<wx/choicdlg.h>
\membersection{::wxGetSingleChoice}\label{wxgetsinglechoice}
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
\func{wxString}{wxGetSingleChoice}{\param{const wxString\& }{message},\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE},\\
+ \param{bool}{ centre = true},\\
\param{int }{width=150}, \param{int }{height=200}}
Pops up a dialog box containing a message, OK/Cancel buttons and a
which is an array of {\it n} strings for the listbox or by using a single
{\it aChoices} parameter of type \helpref{wxArrayString}{wxarraystring}.
-If {\it centre} is TRUE, the message text (which may include new line
-characters) is centred; if FALSE, the message is left-justified.
+If {\it centre} is true, the message text (which may include new line
+characters) is centred; if false, the message is left-justified.
\wxheading{Include files}
\perlnote{In wxPerl there is just an array reference in place of {\tt n}
and {\tt choices}.}
+
\membersection{::wxGetSingleChoiceIndex}\label{wxgetsinglechoiceindex}
\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{const wxArrayString\& }{aChoices},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
\func{int}{wxGetSingleChoiceIndex}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{int}{ n}, \param{const wxString\& }{choices[]},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
As {\bf wxGetSingleChoice} but returns the index representing the selected
string. If the user pressed cancel, -1 is returned.
\perlnote{In wxPerl there is just an array reference in place of {\tt n}
and {\tt choices}.}
+
\membersection{::wxGetSingleChoiceData}\label{wxgetsinglechoicedata}
\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
\param{const wxString\& }{client\_data[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
\func{wxString}{wxGetSingleChoiceData}{\param{const wxString\& }{message},\\
\param{const wxString\& }{caption},\\
\param{const wxString\& }{client\_data[]},\\
\param{wxWindow *}{parent = NULL},\\
\param{int}{ x = -1}, \param{int}{ y = -1},\\
- \param{bool}{ centre = TRUE}, \param{int }{width=150}, \param{int }{height=200}}
+ \param{bool}{ centre = true}, \param{int }{width=150}, \param{int }{height=200}}
As {\bf wxGetSingleChoice} but takes an array of client data pointers
corresponding to the strings, and returns one of these pointers or NULL if
and {\tt choices}, and the client data array must have the
same length as the choices array.}
+
+\membersection{::wxInfoMessageBox}\label{wxinfomessagebox}
+
+\func{void}{wxInfoMessageBox}{\param{wxWindow (}{parent = \NULL}}
+
+Shows a message box with the information about the wxWidgets build used,
+including its version, most important build parameters and the version of the
+underlying GUI toolkit. This is mainly used for diagnostic purposes and can be
+invoked by Ctrl-Alt-middle clicking on any wxWindow which doesn't otherwise
+handle this event.
+
+\newsince{2.9.0}
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxIsBusy}\label{wxisbusy}
+
+\func{bool}{wxIsBusy}{\void}
+
+Returns true if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
+\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+
+See also \helpref{wxBusyCursor}{wxbusycursor}.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
\membersection{::wxMessageBox}\label{wxmessagebox}
-\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK \pipe wxCENTRE},\\
+\func{int}{wxMessageBox}{\param{const wxString\& }{message}, \param{const wxString\& }{caption = ``Message"}, \param{int}{ style = wxOK},\\
\param{wxWindow *}{parent = NULL}, \param{int}{ x = -1}, \param{int}{ y = -1}}
General purpose message dialog. {\it style} may be a bit list of the
\begin{twocollist}\itemsep=0pt
\twocolitem{wxYES\_NO}{Puts Yes and No buttons on the message box. May be combined with
wxCANCEL.}
-\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May be combined with
+\twocolitem{wxCANCEL}{Puts a Cancel button on the message box. May only be combined with
wxYES\_NO or wxOK.}
\twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
-\twocolitem{wxCENTRE}{Centres the text.}
\twocolitem{wxICON\_EXCLAMATION}{Displays an exclamation mark symbol.}
\twocolitem{wxICON\_HAND}{Displays an error symbol.}
\twocolitem{wxICON\_ERROR}{Displays an error symbol - the same as wxICON\_HAND.}
int answer = wxMessageBox("Quit program?", "Confirm",
wxYES_NO | wxCANCEL, main_frame);
if (answer == wxYES)
- delete main_frame;
+ main_frame->Close();
...
\end{verbatim}
{\it message} may contain newline characters, in which case the
message will be split into separate lines, to cater for large messages.
-Under Windows, the native MessageBox function is used unless wxCENTRE
-is specified in the style, in which case a generic function is used.
-This is because the native MessageBox function cannot centre text.
-The symbols are not shown when the generic function is used.
-
\wxheading{Include files}
<wx/msgdlg.h>
+
\membersection{::wxShowTip}\label{wxshowtip}
\func{bool}{wxShowTip}{\param{wxWindow *}{parent},
\param{wxTipProvider *}{tipProvider},
- \param{bool }{showAtStartup = TRUE}}
+ \param{bool }{showAtStartup = true}}
-This function shows a "startup tip" to the user.
+This function shows a "startup tip" to the user. The return value is the
+state of the `Show tips at startup' checkbox.
\docparam{parent}{The parent window for the modal dialog}
\docparam{tipProvider}{An object which is used to get the text of the tips.
It may be created with the \helpref{wxCreateFileTipProvider}{wxcreatefiletipprovider} function.}
-\docparam{showAtStartup}{Should be TRUE if startup tips are shown, FALSE
+\docparam{showAtStartup}{Should be true if startup tips are shown, false
otherwise. This is used as the initial value for "Show tips at startup"
checkbox which is shown in the tips dialog.}
<wx/tipdlg.h>
+
+
+
+\section{Math functions}\label{mathfunctions}
+
+\wxheading{Include files}
+
+<wx/math.h>
+
+
+\membersection{wxFinite}\label{wxfinite}
+
+\func{int}{wxFinite}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is neither infinite nor NaN (not a number),
+returns 0 otherwise.
+
+
+\membersection{wxIsNaN}\label{wxisnan}
+
+\func{bool}{wxIsNaN}{\param{double }{x}}
+
+Returns a non-zero value if {\it x} is NaN (not a number), returns 0
+otherwise.
+
+
+
+
\section{GDI functions}\label{gdifunctions}
The following are relevant to the GDI (Graphics Device Interface).
<wx/gdicmn.h>
-\membersection{::wxClientDisplayRect}
+
+\membersection{wxBITMAP}\label{wxbitmapmacro}
+
+\func{}{wxBITMAP}{bitmapName}
+
+This macro loads a bitmap from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating bitmaps.
+
+\wxheading{See also}
+
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxICON}{wxiconmacro}
+
+\wxheading{Include files}
+
+<wx/gdicmn.h>
+
+
+\membersection{::wxClientDisplayRect}\label{wxclientdisplayrect}
\func{void}{wxClientDisplayRect}{\param{int *}{x}, \param{int *}{y},
\param{int *}{width}, \param{int *}{height}}
-\func{wxRect}{wxGetClientDisplayRect}{\void}
+\func{wxRect}{wxGetClientDisplayRect}{\void}
+
+Returns the dimensions of the work area on the display. On Windows
+this means the area not covered by the taskbar, etc. Other platforms
+are currently defaulting to the whole display until a way is found to
+provide this info for all window managers, etc.
+
+
+\membersection{::wxColourDisplay}\label{wxcolourdisplay}
+
+\func{bool}{wxColourDisplay}{\void}
+
+Returns true if the display is colour, false otherwise.
+
+
+\membersection{::wxDisplayDepth}\label{wxdisplaydepth}
+
+\func{int}{wxDisplayDepth}{\void}
+
+Returns the depth of the display (a value of 1 denotes a monochrome display).
+
+
+\membersection{::wxDisplaySize}\label{wxdisplaysize}
+
+\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
+
+\func{wxSize}{wxGetDisplaySize}{\void}
+
+Returns the display size in pixels.
+
+
+\membersection{::wxDisplaySizeMM}\label{wxdisplaysizemm}
+
+\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
+
+\func{wxSize}{wxGetDisplaySizeMM}{\void}
+
+Returns the display size in millimeters.
+
-Returns the dimensions of the work area on the display. On Windows
-this means the area not covered by the taskbar, etc. Other platforms
-are currently defaulting to the whole display until a way is found to
-provide this info for all window managers, etc.
+\membersection{::wxDROP\_ICON}\label{wxdropicon}
-\membersection{::wxColourDisplay}
+\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
-\func{bool}{wxColourDisplay}{\void}
+This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
+name. Under MSW, the cursor is loaded from the resource file and the icon is
+loaded from XPM file under other platforms.
-Returns TRUE if the display is colour, FALSE otherwise.
+This macro should be used with
+\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
-\membersection{::wxDisplayDepth}
+\wxheading{Include files}
-\func{int}{wxDisplayDepth}{\void}
+<wx/dnd.h>
-Returns the depth of the display (a value of 1 denotes a monochrome display).
-\membersection{::wxDisplaySize}
+\membersection{wxICON}\label{wxiconmacro}
-\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
+\func{}{wxICON}{iconName}
-\func{wxSize}{wxGetDisplaySize}{\void}
+This macro loads an icon from either application resources (on the platforms
+for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
+avoid using {\tt \#ifdef}s when creating icons.
-Returns the display size in pixels.
+\wxheading{See also}
-\membersection{::wxDisplaySizeMM}
+\helpref{Bitmaps and icons overview}{wxbitmapoverview},
+\helpref{wxBITMAP}{wxbitmapmacro}
-\func{void}{wxDisplaySizeMM}{\param{int *}{width}, \param{int *}{height}}
+\wxheading{Include files}
-\func{wxSize}{wxGetDisplaySizeMM}{\void}
+<wx/gdicmn.h>
-Returns the display size in millimeters.
\membersection{::wxMakeMetafilePlaceable}\label{wxmakemetafileplaceable}
SetWindowExt(dc, maxX - minX, maxY - minY);
\end{verbatim}
-This simulates the wxMM\_TEXT mapping mode, which wxWindows assumes.
+This simulates the wxMM\_TEXT mapping mode, which wxWidgets assumes.
Placeable metafiles may be imported by many Windows applications, and can be
used in RTF (Rich Text Format) files.
This function is only available under Windows.
+
\membersection{::wxSetCursor}\label{wxsetcursor}
\func{void}{wxSetCursor}{\param{wxCursor *}{cursor}}
Globally sets the cursor; only has an effect in Windows and GTK.
See also \helpref{wxCursor}{wxcursor}, \helpref{wxWindow::SetCursor}{wxwindowsetcursor}.
+
+
\section{Printer settings}\label{printersettings}
-These routines are obsolete and should no longer be used!
+{\bf NB:} These routines are obsolete and should no longer be used!
The following functions are used to control PostScript printing. Under
Windows, PostScript output can only be sent to a file.
<wx/dcps.h>
-\membersection{::wxGetPrinterCommand}
+
+\membersection{::wxGetPrinterCommand}\label{wxgetprintercommand}
\func{wxString}{wxGetPrinterCommand}{\void}
Gets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxGetPrinterFile}
+
+\membersection{::wxGetPrinterFile}\label{wxgetprinterfile}
\func{wxString}{wxGetPrinterFile}{\void}
Gets the PostScript output filename.
-\membersection{::wxGetPrinterMode}
+
+\membersection{::wxGetPrinterMode}\label{wxgetprintermode}
\func{int}{wxGetPrinterMode}{\void}
Gets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxGetPrinterOptions}
+
+\membersection{::wxGetPrinterOptions}\label{wxgetprinteroptions}
\func{wxString}{wxGetPrinterOptions}{\void}
Gets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxGetPrinterOrientation}
+
+\membersection{::wxGetPrinterOrientation}\label{wxgetprinterorientation}
\func{int}{wxGetPrinterOrientation}{\void}
Gets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxGetPrinterPreviewCommand}
+
+\membersection{::wxGetPrinterPreviewCommand}\label{wxgetprinterpreviewcommand}
\func{wxString}{wxGetPrinterPreviewCommand}{\void}
Gets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxGetPrinterScaling}
+
+\membersection{::wxGetPrinterScaling}\label{wxgetprinterscaling}
\func{void}{wxGetPrinterScaling}{\param{float *}{x}, \param{float *}{y}}
Gets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxGetPrinterTranslation}
+
+\membersection{::wxGetPrinterTranslation}\label{wxgetprintertranslation}
\func{void}{wxGetPrinterTranslation}{\param{float *}{x}, \param{float *}{y}}
Gets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
-\membersection{::wxSetPrinterCommand}
+
+\membersection{::wxSetPrinterCommand}\label{wxsetprintercommand}
\func{void}{wxSetPrinterCommand}{\param{const wxString\& }{command}}
Sets the printer command used to print a file. The default is {\tt lpr}.
-\membersection{::wxSetPrinterFile}
+
+\membersection{::wxSetPrinterFile}\label{wxsetprinterfile}
\func{void}{wxSetPrinterFile}{\param{const wxString\& }{filename}}
Sets the PostScript output filename.
-\membersection{::wxSetPrinterMode}
+
+\membersection{::wxSetPrinterMode}\label{wxsetprintermode}
\func{void}{wxSetPrinterMode}{\param{int }{mode}}
Sets the printing mode controlling where output is sent (PS\_PREVIEW, PS\_FILE or PS\_PRINTER).
The default is PS\_PREVIEW.
-\membersection{::wxSetPrinterOptions}
+
+\membersection{::wxSetPrinterOptions}\label{wxsetprinteroptions}
\func{void}{wxSetPrinterOptions}{\param{const wxString\& }{options}}
Sets the additional options for the print command (e.g. specific printer). The default is nothing.
-\membersection{::wxSetPrinterOrientation}
+
+\membersection{::wxSetPrinterOrientation}\label{wxsetprinterorientation}
\func{void}{wxSetPrinterOrientation}{\param{int}{ orientation}}
Sets the orientation (PS\_PORTRAIT or PS\_LANDSCAPE). The default is PS\_PORTRAIT.
-\membersection{::wxSetPrinterPreviewCommand}
+
+\membersection{::wxSetPrinterPreviewCommand}\label{wxsetprinterpreviewcommand}
\func{void}{wxSetPrinterPreviewCommand}{\param{const wxString\& }{command}}
Sets the command used to view a PostScript file. The default depends on the platform.
-\membersection{::wxSetPrinterScaling}
+
+\membersection{::wxSetPrinterScaling}\label{wxsetprinterscaling}
\func{void}{wxSetPrinterScaling}{\param{float }{x}, \param{float }{y}}
Sets the scaling factor for PostScript output. The default is 1.0, 1.0.
-\membersection{::wxSetPrinterTranslation}
+
+\membersection{::wxSetPrinterTranslation}\label{wxsetprintertranslation}
\func{void}{wxSetPrinterTranslation}{\param{float }{x}, \param{float }{y}}
Sets the translation (from the top left corner) for PostScript output. The default is 0.0, 0.0.
+
+
\section{Clipboard functions}\label{clipsboard}
These clipboard functions are implemented for Windows only. The use of these functions
<wx/clipbrd.h>
-\membersection{::wxClipboardOpen}
+
+\membersection{::wxClipboardOpen}\label{functionwxclipboardopen}
\func{bool}{wxClipboardOpen}{\void}
-Returns TRUE if this application has already opened the clipboard.
+Returns true if this application has already opened the clipboard.
+
-\membersection{::wxCloseClipboard}
+\membersection{::wxCloseClipboard}\label{wxcloseclipboard}
\func{bool}{wxCloseClipboard}{\void}
Closes the clipboard to allow other applications to use it.
-\membersection{::wxEmptyClipboard}
+
+\membersection{::wxEmptyClipboard}\label{wxemptyclipboard}
\func{bool}{wxEmptyClipboard}{\void}
Empties the clipboard.
-\membersection{::wxEnumClipboardFormats}
-\func{int}{wxEnumClipboardFormats}{\param{int}{dataFormat}}
+\membersection{::wxEnumClipboardFormats}\label{wxenumclipboardformats}
+
+\func{int}{wxEnumClipboardFormats}{\param{int}{ dataFormat}}
Enumerates the formats found in a list of available formats that belong
to the clipboard. Each call to this function specifies a known
Before it enumerates the formats function, an application must open the clipboard by using the
wxOpenClipboard function.
-\membersection{::wxGetClipboardData}
-\func{wxObject *}{wxGetClipboardData}{\param{int}{dataFormat}}
+\membersection{::wxGetClipboardData}\label{wxgetclipboarddata}
+
+\func{wxObject *}{wxGetClipboardData}{\param{int}{ dataFormat}}
Gets data from the clipboard.
The clipboard must have previously been opened for this call to succeed.
-\membersection{::wxGetClipboardFormatName}
-\func{bool}{wxGetClipboardFormatName}{\param{int}{dataFormat}, \param{const wxString\& }{formatName}, \param{int}{maxCount}}
+\membersection{::wxGetClipboardFormatName}\label{wxgetclipboardformatname}
+
+\func{bool}{wxGetClipboardFormatName}{\param{int}{ dataFormat}, \param{const wxString\& }{formatName}, \param{int}{ maxCount}}
Gets the name of a registered clipboard format, and puts it into the buffer {\it formatName} which is of maximum
length {\it maxCount}. {\it dataFormat} must not specify a predefined clipboard format.
-\membersection{::wxIsClipboardFormatAvailable}
-\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{dataFormat}}
+\membersection{::wxIsClipboardFormatAvailable}\label{wxisclipboardformatavailable}
-Returns TRUE if the given data format is available on the clipboard.
+\func{bool}{wxIsClipboardFormatAvailable}{\param{int}{ dataFormat}}
-\membersection{::wxOpenClipboard}
+Returns true if the given data format is available on the clipboard.
+
+
+\membersection{::wxOpenClipboard}\label{wxopenclipboard}
\func{bool}{wxOpenClipboard}{\void}
Opens the clipboard for passing data to it or getting data from it.
-\membersection{::wxRegisterClipboardFormat}
+
+\membersection{::wxRegisterClipboardFormat}\label{wxregisterclipboardformat}
\func{int}{wxRegisterClipboardFormat}{\param{const wxString\& }{formatName}}
Registers the clipboard data format name and returns an identifier.
-\membersection{::wxSetClipboardData}
-\func{bool}{wxSetClipboardData}{\param{int}{dataFormat}, \param{wxObject *}{data}, \param{int}{width}, \param{int}{height}}
+\membersection{::wxSetClipboardData}\label{wxsetclipboarddata}
+
+\func{bool}{wxSetClipboardData}{\param{int}{ dataFormat}, \param{wxObject*}{ data}, \param{int}{ width}, \param{int}{ height}}
Passes data to the clipboard.
The clipboard must have previously been opened for this call to succeed.
-\section{Miscellaneous functions}\label{miscellany}
-\membersection{::wxDROP\_ICON}\label{wxdropicon}
-
-\func{wxIconOrCursor}{wxDROP\_ICON}{\param{const char *}{name}}
-
-This macro creates either a cursor (MSW) or an icon (elsewhere) with the given
-name. Under MSW, the cursor is loaded from the resource file and the icon is
-loaded from XPM file under other platforms.
-
-This macro should be used with
-\helpref{wxDropSource constructor}{wxdropsourcewxdropsource}.
-
-\wxheading{Include files}
-
-<wx/dnd.h>
-
-\membersection{::wxNewId}
-
-\func{long}{wxNewId}{\void}
-
-Generates an integer identifier unique to this run of the program.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxRegisterId}
-
-\func{void}{wxRegisterId}{\param{long}{ id}}
-
-Ensures that ids subsequently generated by {\bf NewId} do not clash with
-the given {\bf id}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxBeginBusyCursor}\label{wxbeginbusycursor}
-
-\func{void}{wxBeginBusyCursor}{\param{wxCursor *}{cursor = wxHOURGLASS\_CURSOR}}
-
-Changes the cursor to the given cursor for all windows in the application.
-Use \helpref{wxEndBusyCursor}{wxendbusycursor} to revert the cursor back
-to its previous state. These two calls can be nested, and a counter
-ensures that only the outer calls take effect.
-
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
+\section{Miscellaneous functions and macros}\label{miscellany}
-\wxheading{Include files}
-<wx/utils.h>
+\membersection{wxBase64Decode}\label{wxbase64decode}
-\membersection{::wxBell}
+\func{size\_t}{wxBase64Decode}{\param{void *}{dst}, \param{size\_t }{dstLen},
+\param{const char * }{src}, \param{size\_t }{srcLen = wxNO\_LEN},
+\param{wxBase64DecodeMode }{mode = wxBase64DecodeMode\_Strict},
+\param{size\_t }{*posErr = \NULL}}
-\func{void}{wxBell}{\void}
+\func{wxMemoryBuffer}{wxBase64Decode}{\\
+\param{const char * }{src}, \param{size\_t }{srcLen = wxNO\_LEN},\\
+\param{wxBase64DecodeMode }{mode = wxBase64DecodeMode\_Strict},\\
+\param{size\_t }{*posErr = \NULL}}
-Ring the system bell.
+\func{wxMemoryBuffer}{wxBase64Decode}{\\
+\param{const wxString\& }{src},\\
+\param{wxBase64DecodeMode }{mode = wxBase64DecodeMode\_Strict},\\
+\param{size\_t }{*posErr = \NULL}}
-\wxheading{Include files}
+These function decode a Base64-encoded string. The first version is a raw
+decoding function and decodes the data into the provided buffer \arg{dst} of
+the given size \arg{dstLen}. An error is returned if the buffer is not large
+enough -- that is not at least \helpref{wxBase64DecodedSize(srcLen)}{wxbase64decodedsize}
+bytes. The second version allocates memory internally and returns it as
+\helpref{wxMemoryBuffer}{wxmemorybuffer} and is recommended for normal use.
-<wx/utils.h>
+The first version returns the number of bytes written to the buffer or the
+necessary buffer size if \arg{dst} was \NULL or \texttt{wxCONV\_FAILED} on
+error, e.g. if the output buffer is too small or invalid characters were
+encountered in the input string. The second version returns a buffer with the
+base64 decoded binary equivalent of the input string. In neither case is the
+buffer NUL-terminated.
-\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
+\wxheading{Parameters}
-\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+\docparam{dst}{Pointer to output buffer, may be \NULL to just compute the
+necessary buffer size.}
-Creates and returns an object of the given class, if the class has been
-registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+\docparam{dstLen}{The size of the output buffer, ignored if \arg{dst} is
+\NULL.}
-\membersection{::wxDDECleanUp}\label{wxddecleanup}
+\docparam{src}{The input string, must not be \NULL. For the version using
+wxString, the input string should contain only ASCII characters.}
-\func{void}{wxDDECleanUp}{\void}
+\docparam{srcLen}{The length of the input string or special value
+\texttt{wxNO\_LEN} if the string is \NUL-terminated and the length should be
+computed by this function itself.}
-Called when wxWindows exits, to clean up the DDE system. This no longer needs to be
-called by the application.
+\docparam{mode}{This parameter specifies the function behaviour when invalid
+characters are encountered in input. By default, any such character stops the
+decoding with error. If the mode is wxBase64DecodeMode\_SkipWS, then the white
+space characters are silently skipped instead. And if it is
+wxBase64DecodeMode\_Relaxed, then all invalid characters are skipped.}
-See also \helpref{wxDDEInitialize}{wxddeinitialize}.
+\docparam{posErr}{If this pointer is non-\NULL and an error occurs during
+decoding, it is filled with the index of the invalid character.}
\wxheading{Include files}
-<wx/dde.h>
-
-\membersection{::wxDDEInitialize}\label{wxddeinitialize}
-
-\func{void}{wxDDEInitialize}{\void}
-
-Initializes the DDE system. May be called multiple times without harm.
-
-This no longer needs to be called by the application: it will be called
-by wxWindows if necessary.
+<wx/base64.h>
-See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},
-\helpref{wxDDECleanUp}{wxddecleanup}.
-\wxheading{Include files}
+\membersection{wxBase64DecodedSize}\label{wxbase64decodedsize}
-<wx/dde.h>
+\func{size\_t}{wxBase64DecodedSize}{\param{size\_t }{srcLen}}
-\membersection{::wxDebugMsg}\label{wxdebugmsg}
+Returns the size of the buffer necessary to contain the data encoded in a
+base64 string of length \arg{srcLen}. This can be useful for allocating a
+buffer to be passed to \helpref{wxBase64Decode}{wxbase64decode}.
-\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
-{\bf This function is deprecated, use \helpref{wxLogDebug}{wxlogdebug} instead!}
+\membersection{wxBase64Encode}\label{wxbase64encode}
-Display a debugging message; under Windows, this will appear on the
-debugger command window, and under Unix, it will be written to standard
-error.
+\func{size\_t}{wxBase64Encode}{\param{char *}{dst}, \param{size\_t }{dstLen},
+\param{const void *}{src}, \param{size\_t }{srcLen}}
-The syntax is identical to {\bf printf}: pass a format string and a
-variable list of arguments.
+\func{wxString}{wxBase64Encode}{\param{const void *}{src}, \param{size\_t }{srcLen}}
-{\bf Tip:} under Windows, if your application crashes before the
-message appears in the debugging window, put a wxYield call after
-each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
-(at least for Watcom C++): preformat your messages and use OutputDebugString
-instead.
+\func{wxString}{wxBase64Encode}{\param{const wxMemoryBuffer\& }{buf}}
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+These functions encode the given data using base64. The first of them is the
+raw encoding function writing the output string into provided buffer while the
+other ones return the output as wxString. There is no error return for these
+functions except for the first one which returns \texttt{wxCONV\_FAILED} if the
+output buffer is too small. To allocate the buffer of the correct size, use
+\helpref{wxBase64EncodedSize}{wxbase64encodedsize} or call this function with
+\arg{dst} set to \NULL -- it will then return the necessary buffer size.
-\wxheading{Include files}
+\wxheading{Parameters}
-<wx/utils.h>
+\docparam{dst}{The output buffer, may be \NULL to retrieve the needed buffer
+size.}
-\membersection{::wxDisplaySize}
+\docparam{dstLen}{The output buffer size, ignored if \arg{dst} is \NULL.}
-\func{void}{wxDisplaySize}{\param{int *}{width}, \param{int *}{height}}
+\docparam{src}{The input buffer, must not be \NULL.}
-Gets the physical size of the display in pixels.
+\docparam{srcLen}{The length of the input data.}
\wxheading{Include files}
-<wx/gdicmn.h>
-
-\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
-
-\func{void}{wxEnableTopLevelWindow}{\param{bool}{ enable = TRUE}}
+<wx/base64.h>
-This function enables or disables all top level windows. It is used by
-\helpref{::wxSafeYield}{wxsafeyield}.
-\wxheading{Include files}
+\membersection{wxBase64EncodedSize}\label{wxbase64encodedsize}
-<wx/utils.h>
+\func{size\_t}{wxBase64EncodedSize}{\param{size\_t }{len}}
-\membersection{::wxEntry}\label{wxentry}
+Returns the length of the string with base64 representation of a buffer of
+specified size \arg{len}. This can be useful for allocating the buffer passed
+to \helpref{wxBase64Encode}{wxbase64encode}.
-This initializes wxWindows in a platform-dependent way. Use this if you
-are not using the default wxWindows entry code (e.g. main or WinMain). For example,
-you can initialize wxWindows from an Microsoft Foundation Classes application using
-this function.
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{const wxString\& }{commandLine}, \param{int}{ cmdShow}, \param{bool}{ enterLoop = TRUE}}
+\membersection{wxCONCAT}\label{wxconcat}
-wxWindows initialization under Windows (non-DLL). If {\it enterLoop} is FALSE, the
-function will return immediately after calling wxApp::OnInit. Otherwise, the wxWindows
-message loop will be entered.
+\func{}{wxCONCAT}{\param{}{x}, \param{}{y}}
-\func{void}{wxEntry}{\param{HANDLE}{ hInstance}, \param{HANDLE}{ hPrevInstance},
- \param{WORD}{ wDataSegment}, \param{WORD}{ wHeapSize}, \param{const wxString\& }{ commandLine}}
+This macro returns the concatenation of two tokens \arg{x} and \arg{y}.
-wxWindows initialization under Windows (for applications constructed as a DLL).
-\func{int}{wxEntry}{\param{int}{ argc}, \param{const wxString\& *}{argv}}
+\membersection{wxDECLARE\_APP}\label{wxdeclareapp}
-wxWindows initialization under Unix.
+\func{}{wxDECLARE\_APP}{className}
-\wxheading{Remarks}
+This is used in headers to create a forward declaration of the
+\helpref{wxGetApp}{wxgetapp} function implemented by
+\helpref{wxIMPLEMENT\_APP}{wximplementapp}. It creates the declaration
+{\tt className\& wxGetApp(void)}.
-To clean up wxWindows, call wxApp::OnExit followed by the static function
-wxApp::CleanUp. For example, if exiting from an MFC application that also uses wxWindows:
+Example:
\begin{verbatim}
-int CTheApp::ExitInstance()
-{
- // OnExit isn't called by CleanUp so must be called explicitly.
- wxTheApp->OnExit();
- wxApp::CleanUp();
-
- return CWinApp::ExitInstance();
-}
+ wxDECLARE_APP(MyApp)
\end{verbatim}
\wxheading{Include files}
<wx/app.h>
-\membersection{::wxEndBusyCursor}\label{wxendbusycursor}
-
-\func{void}{wxEndBusyCursor}{\void}
-
-Changes the cursor back to the original cursor, for all windows in the application.
-Use with \helpref{wxBeginBusyCursor}{wxbeginbusycursor}.
-
-See also \helpref{wxIsBusy}{wxisbusy}, \helpref{wxBusyCursor}{wxbusycursor}.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-
-\membersection{::wxError}\label{wxerror}
-
-\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Internal Error"}}
-
-Displays {\it msg} and continues. This writes to standard error under
-Unix, and pops up a message box under Windows. Used for internal
-wxWindows errors. See also \helpref{wxFatalError}{wxfatalerror}.
-
-\wxheading{Include files}
-<wx/utils.h>
+\membersection{wxDYNLIB\_FUNCTION}\label{wxdynlibfunction}
-\membersection{::wxExecute}\label{wxexecute}
+\func{}{wxDYNLIB\_FUNCTION}{\param{}{type}, \param{}{name}, \param{}{dynlib}}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
+When loading a function from a DLL you always have to cast the returned
+{\tt void *} pointer to the correct type and, even more annoyingly, you have to
+repeat this type twice if you want to declare and define a function pointer all
+in one line
-\func{long}{wxExecute}{\param{char **}{argv}, \param{bool }{sync = FALSE}, \param{wxProcess *}{callback = NULL}}
+This macro makes this slightly less painful by allowing you to specify the
+type only once, as the first parameter, and creating a variable of this type
+named after the function but with {\tt pfn} prefix and initialized with the
+function \arg{name} from the \helpref{wxDynamicLibrary}{wxdynamiclibrary}
+\arg{dynlib}.
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}}
+\wxheading{Parameters}
-\func{long}{wxExecute}{\param{const wxString\& }{command}, \param{wxArrayString\& }{output}, \param{wxArrayString\& }{errors}}
+\docparam{type}{the type of the function}
-Executes another program in Unix or Windows.
+\docparam{name}{the name of the function to load, not a string (without quotes,
+it is quoted automatically by the macro)}
-The first form takes a command string, such as {\tt "emacs file.txt"}.
+\docparam{dynlib}{the library to load the function from}
-The second form takes an array of values: a command, any number of
-arguments, terminated by NULL.
-The semantics of the third and fourth versions is different from the first two
-and is described in more details below.
-If {\it sync} is FALSE (the default), flow of control immediately returns.
-If TRUE, the current application waits until the other program has terminated.
+\membersection{wxDEPRECATED}\label{wxdeprecated}
-In the case of synchronous execution, the return value is the exit code of
-the process (which terminates by the moment the function returns) and will be
-$-1$ if the process couldn't be started and typically 0 if the process
-terminated successfully. Also, while waiting for the process to
-terminate, wxExecute will call \helpref{wxYield}{wxyield}. The caller
-should ensure that this can cause no recursion, in the simplest case by
-calling \helpref{wxEnableTopLevelWindows(FALSE)}{wxenabletoplevelwindows}.
+This macro can be used around a function declaration to generate warnings
+indicating that this function is deprecated (i.e. obsolete and planned to be
+removed in the future) when it is used. Only Visual C++ 7 and higher and g++
+compilers currently support this functionality.
-For asynchronous execution, however, the return value is the process id and
-zero value indicates that the command could not be executed. As an added
-complication, the return value of $-1$ in this case indicattes that we didn't
-launch a new process, but connected to the running one (this can only happen in
-case of using DDE under Windows for command execution). In particular, in this,
-and only this, case the calling code will not get the notification about
-process termination.
+Example of use:
+\begin{verbatim}
+ // old function, use wxString version instead
+ wxDEPRECATED( void wxGetSomething(char *buf, size_t len) );
-If callback isn't NULL and if execution is asynchronous (note that callback
-parameter can not be non-NULL for synchronous execution),
-\helpref{wxProcess::OnTerminate}{wxprocessonterminate} will be called when
-the process finishes.
+ // ...
+ wxString wxGetSomething();
+\end{verbatim}
-Finally, you may use the third overloaded version of this function to execute
-a process (always synchronously) and capture its output in the array
-{\it output}. The fourth version adds the possibility to additionally capture
-the messages from standard error output in the {\it errors} array.
-See also \helpref{wxShell}{wxshell}, \helpref{wxProcess}{wxprocess},
-\helpref{Exec sample}{sampleexec}.
+\membersection{wxDEPRECATED\_BUT\_USED\_INTERNALLY}\label{wxdeprecatedbutusedinternally}
-\wxheading{Include files}
+This is a special version of \helpref{wxDEPRECATED}{wxdeprecated} macro which
+only does something when the deprecated function is used from the code outside
+wxWidgets itself but doesn't generate warnings when it is used from wxWidgets.
+It is used with the virtual functions which are called by the library itself --
+even if such function is deprecated the library still has to call it to ensure
+that the existing code overriding it continues to work, but the use of this
+macro ensures that a deprecation warning will be generated if this function is
+used from the user code or, in case of Visual C++, even when it is simply
+overridden.
-<wx/utils.h>
-\membersection{::wxExit}\label{wxexit}
+\membersection{wxDEPRECATED\_INLINE}\label{wxdeprecatedinline}
-\func{void}{wxExit}{\void}
+\func{}{wxDEPRECATED\_INLINE}{\param{}{func}, \param{}{body}}
-Exits application after calling \helpref{wxApp::OnExit}{wxapponexit}.
-Should only be used in an emergency: normally the top-level frame
-should be deleted (after deleting all other frames) to terminate the
-application. See \helpref{wxWindow::OnCloseWindow}{wxwindowonclosewindow} and \helpref{wxApp}{wxapp}.
+This macro is similar to \helpref{wxDEPRECATED}{wxdeprecated} but can be used
+to not only declare the function \arg{func} as deprecated but to also provide
+its (inline) implementation \arg{body}.
-\wxheading{Include files}
+It can be used as following:
+\begin{verbatim}
+ class wxFoo
+ {
+ public:
+ // OldMethod() is deprecated, use NewMethod() instead
+ void NewMethod();
+ wxDEPRECATED_INLINE( void OldMethod(), NewMethod() );
+ };
+\end{verbatim}
-<wx/app.h>
+\membersection{wxEXPLICIT}\label{wxexplicit}
-\membersection{::wxFatalError}\label{wxfatalerror}
+{\tt wxEXPLICIT} is a macro which expands to the C++ {\tt explicit} keyword if
+the compiler supports it or nothing otherwise. Thus, it can be used even in the
+code which might have to be compiled with an old compiler without support for
+this language feature but still take advantage of it when it is available.
-\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWindows Fatal Error"}}
-Displays {\it msg} and exits. This writes to standard error under Unix,
-and pops up a message box under Windows. Used for fatal internal
-wxWindows errors. See also \helpref{wxError}{wxerror}.
-\wxheading{Include files}
+\membersection{::wxGetKeyState}\label{wxgetkeystate}
-<wx/utils.h>
+\func{bool}{wxGetKeyState}{\param{wxKeyCode }{key}}
-\membersection{::wxFindMenuItemId}
+For normal keys, returns \true if the specified key is currently down.
-\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
+For togglable keys (Caps Lock, Num Lock and Scroll Lock), returns
+\true if the key is toggled such that its LED indicator is lit. There is
+currently no way to test whether togglable keys are up or down.
-Find a menu item identifier associated with the given frame's menu bar.
+Even though there are virtual key codes defined for mouse buttons, they
+cannot be used with this function currently.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxFindWindowByLabel}\label{wxfindwindowbylabel}
-
-\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
-
-Find a window by its label. Depending on the type of window, the label may be a window title
-or panel item label. If {\it parent} is NULL, the search will start from all top-level
-frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
-The search is recursive in both cases.
-
-\wxheading{Include files}
-
-<wx/utils.h>
-\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
+\membersection{wxLL}\label{wxll}
-\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
+\func{wxLongLong\_t}{wxLL}{\param{}{number}}
-Find a window by its name (as given in a window constructor or {\bf Create} function call).
-If {\it parent} is NULL, the search will start from all top-level
-frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
-The search is recursive in both cases.
+This macro is defined for the platforms with a native 64 bit integer type and
+allows to define 64 bit compile time constants:
-If no such named window is found, {\bf wxFindWindowByLabel} is called.
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ wxLongLong_t ll = wxLL(0x1234567890abcdef);
+ #endif
+\end{verbatim}
\wxheading{Include files}
-<wx/utils.h>
-
-\membersection{::wxFindWindowAtPoint}\label{wxfindwindowatpoint}
+<wx/longlong.h>
-\func{wxWindow *}{wxFindWindowAtPoint}{\param{const wxPoint\& }{pt}}
+\wxheading{See also}
-Find the deepest window at the given mouse position in screen coordinates,
-returning the window if found, or NULL if not.
+\helpref{wxULL}{wxull}, \helpref{wxLongLong}{wxlonglong}
-\membersection{::wxFindWindowAtPointer}\label{wxfindwindowatpointer}
-\func{wxWindow *}{wxFindWindowAtPointer}{\param{wxPoint\& }{pt}}
+\membersection{wxLongLongFmtSpec}\label{wxlonglongfmtspec}
-Find the deepest window at the mouse pointer position, returning the window
-and current pointer position in screen coordinates.
+This macro is defined to contain the {\tt printf()} format specifier using
+which 64 bit integer numbers (i.e. those of type {\tt wxLongLong\_t}) can be
+printed. Example of using it:
-\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ wxLongLong_t ll = wxLL(0x1234567890abcdef);
+ printf("Long long = %" wxLongLongFmtSpec "x\n", ll);
+ #endif
+\end{verbatim}
-\func{wxWindow *}{wxGetActiveWindow}{\void}
+\wxheading{See also}
-Gets the currently active window (Windows only).
+\helpref{wxLL}{wxll}
\wxheading{Include files}
-<wx/windows.h>
+<wx/longlong.h>
-\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
-\func{wxString}{wxGetDisplayName}{\void}
+\membersection{::wxNewId}\label{wxnewid}
+
+\func{long}{wxNewId}{\void}
+
+This function is deprecated as the ids generated by it can conflict with the
+ids defined by the user code, use \texttt{wxID\_ANY} to assign ids which are
+guaranteed to not conflict with the user-defined ids for the controls and menu
+items you create instead of using this function.
-Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
+
+Generates an integer identifier unique to this run of the program.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetHomeDir}\label{wxgethomedir}
-\func{wxString}{wxGetHomeDir}{\void}
+\membersection{wxON\_BLOCK\_EXIT}\label{wxonblockexit}
-Return the (current) user's home directory.
+\func{}{wxON\_BLOCK\_EXIT0}{\param{}{func}}
-\wxheading{See also}
+\func{}{wxON\_BLOCK\_EXIT1}{\param{}{func}, \param{}{p1}}
+
+\func{}{wxON\_BLOCK\_EXIT2}{\param{}{func}, \param{}{p1}, \param{}{p2}}
+
+This family of macros allows to ensure that the global function \arg{func}
+with 0, 1, 2 or more parameters (up to some implementaton-defined limit) is
+executed on scope exit, whether due to a normal function return or because an
+exception has been thrown. A typical example of its usage:
+\begin{verbatim}
+ void *buf = malloc(size);
+ wxON_BLOCK_EXIT1(free, buf);
+\end{verbatim}
-\helpref{wxGetUserHome}{wxgetuserhome}
+Please see the original article by Andrei Alexandrescu and Petru Marginean
+published in December 2000 issue of \emph{C/C++ Users Journal} for more
+details.
\wxheading{Include files}
-<wx/utils.h>
+<wx/scopeguard.h>
-\membersection{::wxGetFreeMemory}\label{wxgetfreememory}
+\wxheading{See also}
-\func{long}{wxGetFreeMemory}{\void}
+\helpref{wxON\_BLOCK\_EXIT\_OBJ}{wxonblockexitobj}
-Returns the amount of free memory in bytes under environments which
-support it, and -1 if not supported. Currently, it is supported only
-under Windows, Linux and Solaris.
-\wxheading{Include files}
+\membersection{wxON\_BLOCK\_EXIT\_OBJ}\label{wxonblockexitobj}
-<wx/utils.h>
+\func{}{wxON\_BLOCK\_EXIT\_OBJ0}{\param{}{obj}, \param{}{method}}
-\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
+\func{}{wxON\_BLOCK\_EXIT\_OBJ1}{\param{}{obj}, \param{}{method}, \param{}{p1}}
-\func{wxPoint}{wxGetMousePosition}{\void}
+\func{}{wxON\_BLOCK\_EXIT\_OBJ2}{\param{}{obj}, \param{}{method}, \param{}{p1}, \param{}{p2}}
-Returns the mouse position in screen coordinates.
+This family of macros is similar to \helpref{wxON\_BLOCK\_EXIT}{wxonblockexit}
+but calls a method of the given object instead of a free function.
\wxheading{Include files}
-<wx/utils.h>
-
-\membersection{::wxGetOsDescription}\label{wxgetosdescription}
+<wx/scopeguard.h>
-\func{wxString}{wxGetOsDescription}{\void}
-Returns the string containing the description of the current platform in a
-user-readable form. For example, this function may return strings like
-{\tt Windows NT Version 4.0} or {\tt Linux 2.2.2 i386}.
+\membersection{::wxRegisterId}\label{wxregisterid}
-\wxheading{See also}
+\func{void}{wxRegisterId}{\param{long}{ id}}
-\helpref{::wxGetOsVersion}{wxgetosversion}
+Ensures that ids subsequently generated by {\bf NewId} do not clash with
+the given {\bf id}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetOsVersion}\label{wxgetosversion}
-
-\func{int}{wxGetOsVersion}{\param{int *}{major = NULL}, \param{int *}{minor = NULL}}
-Gets operating system version information.
+\membersection{::wxDDECleanUp}\label{wxddecleanup}
-\begin{twocollist}\itemsep=0pt
-\twocolitemruled{Platform}{Return types}
-\twocolitem{Macintosh}{Return value is wxMACINTOSH.}
-\twocolitem{GTK}{Return value is wxGTK, For GTK 1.0, {\it major} is 1, {\it minor} is 0. }
-\twocolitem{Motif}{Return value is wxMOTIF\_X, {\it major} is X version, {\it minor} is X revision.}
-\twocolitem{OS/2}{Return value is wxOS2\_PM.}
-\twocolitem{Windows 3.1}{Return value is wxWINDOWS, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Windows NT/2000}{Return value is wxWINDOWS\_NT, version is returned in {\it major} and {\it minor}}
-\twocolitem{Windows 98}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 1 or greater.}
-\twocolitem{Windows 95}{Return value is wxWIN95, {\it major} is 4, {\it minor} is 0.}
-\twocolitem{Win32s (Windows 3.1)}{Return value is wxWIN32S, {\it major} is 3, {\it minor} is 1.}
-\twocolitem{Watcom C++ 386 supervisor mode (Windows 3.1)}{Return value is wxWIN386, {\it major} is 3, {\it minor} is 1.}
-\end{twocollist}
+\func{void}{wxDDECleanUp}{\void}
-\wxheading{See also}
+Called when wxWidgets exits, to clean up the DDE system. This no longer needs to be
+called by the application.
-\helpref{::wxGetOsDescription}{wxgetosdescription}
+See also \helpref{wxDDEInitialize}{wxddeinitialize}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/dde.h>
+
+
+\membersection{::wxDDEInitialize}\label{wxddeinitialize}
+
+\func{void}{wxDDEInitialize}{\void}
-\membersection{::wxGetResource}\label{wxgetresource}
+Initializes the DDE system. May be called multiple times without harm.
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& *}{value}, \param{const wxString\& }{file = NULL}}
+This no longer needs to be called by the application: it will be called
+by wxWidgets if necessary.
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float *}{value}, \param{const wxString\& }{file = NULL}}
+See also \helpref{wxDDEServer}{wxddeserver}, \helpref{wxDDEClient}{wxddeclient}, \helpref{wxDDEConnection}{wxddeconnection},\rtfsp
+\helpref{wxDDECleanUp}{wxddecleanup}.
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long *}{value}, \param{const wxString\& }{file = NULL}}
+\wxheading{Include files}
-\func{bool}{wxGetResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int *}{value}, \param{const wxString\& }{file = NULL}}
+<wx/dde.h>
-Gets a resource value from the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
-Under X, if an application class (wxApp::GetClassName) has been defined,
-it is appended to the string /usr/lib/X11/app-defaults/ to try to find
-an applications default file when merging all resource databases.
+\membersection{::wxEnableTopLevelWindows}\label{wxenabletoplevelwindows}
-The reason for passing the result in an argument is that it
-can be convenient to define a default value, which gets overridden
-if the value exists in the resource file. It saves a separate
-test for that resource's existence, and it also allows
-the overloading of the function for different types.
+\func{void}{wxEnableTopLevelWindows}{\param{bool}{ enable = true}}
-See also \helpref{wxWriteResource}{wxwriteresource}, \helpref{wxConfigBase}{wxconfigbase}.
+This function enables or disables all top level windows. It is used by
+\helpref{::wxSafeYield}{wxsafeyield}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserId}
-\func{bool}{wxGetUserId}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
+\membersection{::wxFindMenuItemId}\label{wxfindmenuitemid}
+
+\func{int}{wxFindMenuItemId}{\param{wxFrame *}{frame}, \param{const wxString\& }{menuString}, \param{const wxString\& }{itemString}}
-Copies the user's login identity (such as ``jacs'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``user''.
+Find a menu item identifier associated with the given frame's menu bar.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserHome}\label{wxgetuserhome}
-\func{const wxChar *}{wxGetUserHome}{\param{const wxString\& }{user = ""}}
+\membersection{::wxFindWindowByLabel}\label{wxfindwindowbylabel}
+
+\func{wxWindow *}{wxFindWindowByLabel}{\param{const wxString\& }{label}, \param{wxWindow *}{parent=NULL}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxWindow::FindWindowByLabel}{wxwindowfindwindowbylabel} instead.
-Returns the home directory for the given user. If the username is empty
-(default value), this function behaves like
-\helpref{wxGetHomeDir}{wxgethomedir}.
+Find a window by its label. Depending on the type of window, the label may be a window title
+or panel item label. If {\it parent} is NULL, the search will start from all top-level
+frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
+The search is recursive in both cases.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxGetUserName}
-\func{bool}{wxGetUserName}{\param{const wxString\& }{buf}, \param{int}{ bufSize}}
+\membersection{::wxFindWindowByName}\label{wxfindwindowbyname}
+
+\func{wxWindow *}{wxFindWindowByName}{\param{const wxString\& }{name}, \param{wxWindow *}{parent=NULL}}
+
+{\bf NB:} This function is obsolete, please use
+\helpref{wxWindow::FindWindowByName}{wxwindowfindwindowbyname} instead.
+
+Find a window by its name (as given in a window constructor or {\bf Create} function call).
+If {\it parent} is NULL, the search will start from all top-level
+frames and dialog boxes; if non-NULL, the search will be limited to the given window hierarchy.
+The search is recursive in both cases.
-Copies the user's name (such as ``Julian Smart'') into the buffer {\it
-buf}, of maximum size {\it bufSize}, returning TRUE if successful.
-Under Windows, this returns ``unknown''.
+If no such named window is found, {\bf wxFindWindowByLabel} is called.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxHandleFatalExceptions}\label{wxhandlefatalexceptions}
-\func{bool}{wxHandleFatalExceptions}{\param{bool}{ doIt = TRUE}}
+\membersection{::wxFindWindowAtPoint}\label{wxfindwindowatpoint}
-If {\it doIt} is TRUE, the fatal exceptions (also known as general protection
-faults under Windows or segmentation violations in the Unix world) will be
-caught and passed to \helpref{wxApp::OnFatalException}{wxapponfatalexception}.
-By default, i.e. before this function is called, they will be handled in the
-normal way which usually just means that the application will be terminated.
-Calling wxHandleFatalExceptions() with {\it doIt} equal to FALSE will restore
-this default behaviour.
+\func{wxWindow *}{wxFindWindowAtPoint}{\param{const wxPoint\& }{pt}}
-\membersection{::wxInitAllImageHandlers}\label{wxinitallimagehandlers}
+Find the deepest window at the given mouse position in screen coordinates,
+returning the window if found, or NULL if not.
-\func{void}{wxInitAllImageHandlers}{\void}
-Initializes all available image handlers. For a list of available handlers,
-see \helpref{wxImage}{wximage}.
+\membersection{::wxFindWindowAtPointer}\label{wxfindwindowatpointer}
-\wxheading{See also}
+\func{wxWindow *}{wxFindWindowAtPointer}{\param{wxPoint\& }{pt}}
-\helpref{wxImage}{wximage}, \helpref{wxImageHandler}{wximagehandler}
+Find the deepest window at the mouse pointer position, returning the window
+and current pointer position in screen coordinates.
-\wxheading{Include files}
-<wx/image.h>
+\membersection{wxFromString}\label{wxfromstring}
-\membersection{::wxInitialize}\label{wxinitialize}
+\func{bool}{wxFromString}{\param{const wxString\& }{str},
+ \param{wxColour* }{col}}
-\func{bool}{wxInitialize}{\void}
+\func{bool}{wxFromString}{\param{const wxString\& }{str},
+ \param{wxFont* }{col}}
-This function is used in wxBase only and only if you don't create
-\helpref{wxApp}{wxapp} object at all. In this case you must call it from your
-{\tt main()} function before calling any other wxWindows functions.
+Converts string to the type of the second argument. Returns \true on success.
+See also: \helpref{wxToString}{wxtostring}.
-If the function returns {\tt FALSE} the initialization could not be performed,
-in this case the library cannot be used and
-\helpref{wxUninitialize}{wxuninitialize} shouldn't be called neither.
-This function may be called several times but
-\helpref{wxUninitialize}{wxuninitialize} must be called for each successful
-call to this function.
+\membersection{::wxGetActiveWindow}\label{wxgetactivewindow}
+
+\func{wxWindow *}{wxGetActiveWindow}{\void}
+
+Gets the currently active window (implemented for MSW and GTK only currently,
+always returns \NULL in the other ports).
\wxheading{Include files}
-<wx/app.h>
+<wx/window.h>
-\membersection{::wxIsBusy}\label{wxisbusy}
-\func{bool}{wxIsBusy}{\void}
+\membersection{::wxGetBatteryState}\label{wxgetbatterystate}
-Returns TRUE if between two \helpref{wxBeginBusyCursor}{wxbeginbusycursor} and\rtfsp
-\helpref{wxEndBusyCursor}{wxendbusycursor} calls.
+\func{wxBatteryState}{wxGetBatteryState}{\void}
-See also \helpref{wxBusyCursor}{wxbusycursor}.
+Returns battery state as one of \texttt{wxBATTERY\_NORMAL\_STATE},
+\texttt{wxBATTERY\_LOW\_STATE}, \texttt{wxBATTERY\_CRITICAL\_STATE},
+\texttt{wxBATTERY\_SHUTDOWN\_STATE} or \texttt{wxBATTERY\_UNKNOWN\_STATE}.
+\texttt{wxBATTERY\_UNKNOWN\_STATE} is also the default on platforms where
+this feature is not implemented (currently everywhere but MS Windows).
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxKill}\label{wxkill}
-\func{int}{wxKill}{\param{long}{ pid}, \param{int}{ sig = wxSIGTERM}, \param{wxKillError }{*rc = NULL}}
+\membersection{::wxGetDisplayName}\label{wxgetdisplayname}
-Equivalent to the Unix kill function: send the given signal {\it sig} to the
-process with PID {\it pid}. The valud signal values are
+\func{wxString}{wxGetDisplayName}{\void}
-\begin{verbatim}
-enum wxSignal
-{
- wxSIGNONE = 0, // verify if the process exists under Unix
- wxSIGHUP,
- wxSIGINT,
- wxSIGQUIT,
- wxSIGILL,
- wxSIGTRAP,
- wxSIGABRT,
- wxSIGEMT,
- wxSIGFPE,
- wxSIGKILL, // forcefully kill, dangerous!
- wxSIGBUS,
- wxSIGSEGV,
- wxSIGSYS,
- wxSIGPIPE,
- wxSIGALRM,
- wxSIGTERM // terminate the process gently
-};
-\end{verbatim}
+Under X only, returns the current display name. See also \helpref{wxSetDisplayName}{wxsetdisplayname}.
-{\tt wxSIGNONE}, {\tt wxSIGKILL} and {\tt wxSIGTERM} have the same meaning
-under both Unix and Windows but all the other signals are equivalent to
-{\tt wxSIGTERM} under Windows.
+\wxheading{Include files}
-Returns 0 on success, -1 on failure. If {\it rc} parameter is not NULL, it will
-be filled with an element of {\tt wxKillError} enum:
+<wx/utils.h>
-\begin{verbatim}
-enum wxKillError
-{
- wxKILL_OK, // no error
- wxKILL_BAD_SIGNAL, // no such signal
- wxKILL_ACCESS_DENIED, // permission denied
- wxKILL_NO_PROCESS, // no such process
- wxKILL_ERROR // another, unspecified error
-};
-\end{verbatim}
-\wxheading{See also}
+\membersection{::wxGetPowerType}\label{wxgetpowertype}
-\helpref{wxProcess::Kill}{wxprocesskill},\rtfsp
-\helpref{wxProcess::Exists}{wxprocessexists},\rtfsp
-\helpref{Exec sample}{sampleexec}
+\func{wxPowerType}{wxGetPowerType}{\void}
+
+Returns the type of power source as one of \texttt{wxPOWER\_SOCKET},
+\texttt{wxPOWER\_BATTERY} or \texttt{wxPOWER\_UNKNOWN}.
+\texttt{wxPOWER\_UNKNOWN} is also the default on platforms where this
+feature is not implemented (currently everywhere but MS Windows).
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxLoadUserResource}\label{wxloaduserresource}
-\func{wxString}{wxLoadUserResource}{\param{const wxString\& }{resourceName}, \param{const wxString\& }{resourceType=``TEXT"}}
+\membersection{::wxGetMousePosition}\label{wxgetmouseposition}
-Loads a user-defined Windows resource as a string. If the resource is found, the function creates
-a new character array and copies the data into it. A pointer to this data is returned. If unsuccessful, NULL is returned.
+\func{wxPoint}{wxGetMousePosition}{\void}
-The resource must be defined in the {\tt .rc} file using the following syntax:
+Returns the mouse position in screen coordinates.
-\begin{verbatim}
-myResource TEXT file.ext
-\end{verbatim}
+\wxheading{Include files}
-where {\tt file.ext} is a file that the resource compiler can find.
+<wx/utils.h>
-One use of this is to store {\tt .wxr} files instead of including the data in the C++ file; some compilers
-cannot cope with the long strings in a {\tt .wxr} file. The resource data can then be parsed
-using \helpref{wxResourceParseString}{wxresourceparsestring}.
-This function is available under Windows only.
+\membersection{::wxGetMouseState}\label{wxgetmousestate}
+
+\func{wxMouseState}{wxGetMouseState}{\void}
+
+Returns the current state of the mouse. Returns a wxMouseState
+instance that contains the current position of the mouse pointer in
+screen coordinates, as well as boolean values indicating the up/down
+status of the mouse buttons and the modifier keys.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxNow}\label{wxnow}
+wxMouseState has the following interface:
-\func{wxString}{wxNow}{\void}
+\begin{verbatim}
+class wxMouseState
+{
+public:
+ wxMouseState();
-Returns a string representing the current date and time.
+ wxCoord GetX();
+ wxCoord GetY();
-\wxheading{Include files}
+ bool LeftDown();
+ bool MiddleDown();
+ bool RightDown();
-<wx/utils.h>
+ bool ControlDown();
+ bool ShiftDown();
+ bool AltDown();
+ bool MetaDown();
+ bool CmdDown();
-\membersection{::wxPostDelete}\label{wxpostdelete}
+ void SetX(wxCoord x);
+ void SetY(wxCoord y);
-\func{void}{wxPostDelete}{\param{wxObject *}{object}}
+ void SetLeftDown(bool down);
+ void SetMiddleDown(bool down);
+ void SetRightDown(bool down);
-Tells the system to delete the specified object when
-all other events have been processed. In some environments, it is
-necessary to use this instead of deleting a frame directly with the
-delete operator, because some GUIs will still send events to a deleted window.
+ void SetControlDown(bool down);
+ void SetShiftDown(bool down);
+ void SetAltDown(bool down);
+ void SetMetaDown(bool down);
+};
+\end{verbatim}
-Now obsolete: use \helpref{wxWindow::Close}{wxwindowclose} instead.
-\wxheading{Include files}
-<wx/utils.h>
+\membersection{::wxGetStockLabel}\label{wxgetstocklabel}
-\membersection{::wxPostEvent}\label{wxpostevent}
+\func{wxString}{wxGetStockLabel}{\param{wxWindowID }{id}, \param{bool }{withCodes = true}, \param{const wxString\& }{accelerator = wxEmptyString}}
-\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
+Returns label that should be used for given {\it id} element.
+
+\wxheading{Parameters}
-This function posts the event to the specified {\it dest} object. The
-difference between sending an event and posting it is that in the first case
-the event is processed before the function returns (in wxWindows, event sending
-is done with \helpref{ProcessEvent}{wxevthandlerprocessevent} function), but in
-the second, the function returns immediately and the event will be processed
-sometime later - usually during the next even loop iteration.
+\docparam{id}{given id of the \helpref{wxMenuItem}{wxmenuitem}, \helpref{wxButton}{wxbutton}, \helpref{wxToolBar}{wxtoolbar} tool, etc.}
-Note that a copy of the {\it event} is made by the function, so the original
-copy can be deleted as soon as function returns. This function can also be used
-to send events between different threads safely. As this function makes a
-copy of the event, the event needs to have a fully implemented Clone() method,
-which may not be the case for all event in wxWindows.
+\docparam{withCodes}{if false then strip accelerator code from the label;
+useful for getting labels without accelerator char code like for toolbar tooltip or
+on platforms without traditional keyboard like smartphones}
-See also \helpref{AddPendingEvent}{wxevthandleraddpendingevent} (which this function
-uses internally).
+\docparam{accelerator}{optional accelerator string automatically added to label; useful
+for building labels for \helpref{wxMenuItem}{wxmenuitem}}
\wxheading{Include files}
-<wx/app.h>
+<wx/stockitem.h>
-\membersection{::wxSafeYield}\label{wxsafeyield}
-\func{bool}{wxSafeYield}{\param{wxWindow*}{ win = NULL}}
+\membersection{::wxGetTopLevelParent}\label{wxgettoplevelparent}
-This function is similar to wxYield, except that it disables the user input to
-all program windows before calling wxYield and re-enables it again
-afterwards. If {\it win} is not NULL, this window will remain enabled,
-allowing the implementation of some limited user interaction.
+\func{wxWindow *}{wxGetTopLevelParent}{\param{wxWindow }{*win}}
-Returns the result of the call to \helpref{::wxYield}{wxyield}.
+Returns the first top level parent of the given window, or in other words, the
+frame or dialog containing it, or {\tt NULL}.
\wxheading{Include files}
-<wx/utils.h>
+<wx/window.h>
-\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
-\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
+\membersection{::wxLaunchDefaultBrowser}\label{wxlaunchdefaultbrowser}
-Under X only, sets the current display name. This is the X host and display name such
-as ``colonsay:0.0", and the function indicates which display should be used for creating
-windows from this point on. Setting the display within an application allows multiple
-displays to be used.
+\func{bool}{wxLaunchDefaultBrowser}{\param{const wxString\& }{url}, \param{int }{flags = $0$}}
-See also \helpref{wxGetDisplayName}{wxgetdisplayname}.
+Open the \arg{url} in user's default browser. If \arg{flags} parameter contains
+\texttt{wxBROWSER\_NEW\_WINDOW} flag, a new window is opened for the URL
+(currently this is only supported under Windows). The \arg{url} may also be a
+local file path (with or without \texttt{file://} prefix), if it doesn't
+correspond to an existing file and the URL has no scheme \texttt{http://} is
+prepended to it by default.
+
+Returns \true if the application was successfully launched.
+
+Note that for some configurations of the running user, the application which
+is launched to open the given URL may be URL-dependent (e.g. a browser may be used for
+local URLs while another one may be used for remote URLs).
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxShell}\label{wxshell}
-
-\func{bool}{wxShell}{\param{const wxString\& }{command = NULL}}
-Executes a command in an interactive shell window. If no command is
-specified, then just the shell is spawned.
+\membersection{::wxLoadUserResource}\label{wxloaduserresource}
-See also \helpref{wxExecute}{wxexecute}, \helpref{Exec sample}{sampleexec}.
+\func{wxString}{wxLoadUserResource}{\param{const wxString\& }{resourceName}, \param{const wxString\& }{resourceType=``TEXT"}}
-\wxheading{Include files}
+Loads a user-defined Windows resource as a string. If the resource is found, the function creates
+a new character array and copies the data into it. A pointer to this data is returned. If unsuccessful, NULL is returned.
-<wx/utils.h>
+The resource must be defined in the {\tt .rc} file using the following syntax:
-\membersection{::wxSleep}\label{wxsleep}
+\begin{verbatim}
+myResource TEXT file.ext
+\end{verbatim}
-\func{void}{wxSleep}{\param{int}{ secs}}
+where {\tt file.ext} is a file that the resource compiler can find.
-Sleeps for the specified number of seconds.
+This function is available under Windows only.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxStripMenuCodes}
-\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{in}}
+\membersection{::wxPostDelete}\label{wxpostdelete}
-\func{void}{wxStripMenuCodes}{\param{char* }{in}, \param{char* }{out}}
+\func{void}{wxPostDelete}{\param{wxObject *}{object}}
-Strips any menu codes from {\it in} and places the result
-in {\it out} (or returns the new string, in the first form).
+Tells the system to delete the specified object when
+all other events have been processed. In some environments, it is
+necessary to use this instead of deleting a frame directly with the
+delete operator, because some GUIs will still send events to a deleted window.
-Menu codes include \& (mark the next character with an underline
-as a keyboard shortkey in Windows and Motif) and $\backslash$t (tab in Windows).
+Now obsolete: use \helpref{wxWindow::Close}{wxwindowclose} instead.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxToLower}\label{wxtolower}
-\func{char}{wxToLower}{\param{char }{ch}}
+\membersection{::wxPostEvent}\label{wxpostevent}
+
+\func{void}{wxPostEvent}{\param{wxEvtHandler *}{dest}, \param{wxEvent\& }{event}}
-Converts the character to lower case. This is implemented as a macro for efficiency.
+In a GUI application, this function posts {\it event} to the specified {\it dest}
+object using \helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
+Otherwise, it dispatches {\it event} immediately using
+\helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent}.
+See the respective documentation for details (and caveats).
\wxheading{Include files}
-<wx/utils.h>
+<wx/app.h>
+
+
+\membersection{::wxSetDisplayName}\label{wxsetdisplayname}
-\membersection{::wxToUpper}\label{wxtoupper}
+\func{void}{wxSetDisplayName}{\param{const wxString\& }{displayName}}
-\func{char}{wxToUpper}{\param{char }{ch}}
+Under X only, sets the current display name. This is the X host and display name such
+as ``colonsay:0.0", and the function indicates which display should be used for creating
+windows from this point on. Setting the display within an application allows multiple
+displays to be used.
-Converts the character to upper case. This is implemented as a macro for efficiency.
+See also \helpref{wxGetDisplayName}{wxgetdisplayname}.
\wxheading{Include files}
<wx/utils.h>
-\membersection{::wxTrace}\label{wxtrace}
-\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+\membersection{::wxStripMenuCodes}\label{wxstripmenucodes}
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+\func{wxString}{wxStripMenuCodes}{\param{const wxString\& }{str}, \param{int }{flags = wxStrip\_All}}
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+Strips any menu codes from \arg{str} and returns the result.
-\wxheading{Include files}
+By default, the functions strips both the mnemonics character (\texttt{'\&'})
+which is used to indicate a keyboard shortkey, and the accelerators, which are
+used only in the menu items and are separated from the main text by the
+\texttt{$\backslash$t} (TAB) character. By using \arg{flags} of
+\texttt{wxStrip\_Mnemonics} or \texttt{wxStrip\_Accel} to strip only the former
+or the latter part, respectively.
-<wx/memory.h>
+Notice that in most cases
+\helpref{wxMenuItem::GetLabelFromText}{wxmenuitemgetlabelfromtext} or
+\helpref{wxControl::GetLabelText}{wxcontrolgetlabeltext} can be used instead.
-\membersection{::wxTraceLevel}\label{wxtracelevel}
+\wxheading{Include files}
-\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
+<wx/utils.h>
-Takes printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+\membersection{wxSTRINGIZE}\label{wxstringize}
-\wxheading{Include files}
+\func{}{wxSTRINGIZE}{\param{}{x}}
-<wx/memory.h>
+Returns the string representation of the given symbol which can be either a
+literal or a macro (hence the advantage of using this macro instead of the
+standard preprocessor \texttt{\#} operator which doesn't work with macros).
-\membersection{::wxTrap}\label{wxtrap}
+Notice that this macro always produces a \texttt{char} string, use
+\helpref{wxSTRINGIZE\_T}{wxstringizet} to build a wide string Unicode build.
-\func{void}{wxTrap}{\void}
+\wxheading{See also}
-In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
-debugger exception meaning that the control is passed to the debugger if one is
-attached to the process. Otherwise the program just terminates abnormally.
+\helpref{wxCONCAT}{wxconcat}
-In release mode this function does nothing.
-\wxheading{Include files}
+\membersection{wxSTRINGIZE\_T}\label{wxstringizet}
-<wx/debug.h>
+\func{}{wxSTRINGIZE\_T}{\param{}{x}}
-\membersection{::wxUninitialize}\label{wxuninitialize}
+Returns the string representation of the given symbol as either an ASCII or
+Unicode string, depending on the current build. This is the Unicode-friendly
+equivalent of \helpref{wxSTRINGIZE}{wxstringize}.
-\func{void}{wxUninitialize}{\void}
-This function is for use in console (wxBase) programs only. It must be called
-once for each previous successful call to \helpref{wxInitialize}{wxinitialize}.
+\membersection{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}\label{wxsuppressgccprivatedtorwarning}
-\wxheading{Include files}
+\func{}{wxSUPPRESS\_GCC\_PRIVATE\_DTOR\_WARNING}{\param{}{name}}
-<wx/app.h>
+GNU C++ compiler gives a warning for any class whose destructor is private
+unless it has a friend. This warning may sometimes be useful but it doesn't
+make sense for reference counted class which always delete themselves (hence
+destructor should be private) but don't necessarily have any friends, so this
+macro is provided to disable the warning in such case. The \arg{name} parameter
+should be the name of the class but is only used to construct a unique friend
+class name internally. Example of using the macro:
-\membersection{::wxUsleep}\label{wxusleep}
+\begin{verbatim}
+ class RefCounted
+ {
+ public:
+ RefCounted() { m_nRef = 1; }
+ void IncRef() { m_nRef++ ; }
+ void DecRef() { if ( !--m_nRef ) delete this; }
-\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+ private:
+ ~RefCounted() { }
-Sleeps for the specified number of milliseconds. Notice that usage of this
-function is encouraged instead of calling usleep(3) directly because the
-standard usleep() function is not MT safe.
+ wxSUPPRESS_GCC_PRIVATE_DTOR(RefCounted)
+ };
+\end{verbatim}
-\wxheading{Include files}
+Notice that there should be no semicolon after this macro.
-<wx/utils.h>
-\membersection{::wxWriteResource}\label{wxwriteresource}
+\membersection{wxToString}\label{wxtostring}
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{const wxString\& }{value}, \param{const wxString\& }{file = NULL}}
+\func{wxString}{wxToString}{\param{const wxColour\& }{col}}
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{float }{value}, \param{const wxString\& }{file = NULL}}
+\func{wxString}{wxToString}{\param{const wxFont\& }{col}}
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{long }{value}, \param{const wxString\& }{file = NULL}}
+Converts its argument to string.
+See also: \helpref{wxFromString}{wxfromstring}.
-\func{bool}{wxWriteResource}{\param{const wxString\& }{section}, \param{const wxString\& }{entry},
- \param{int }{value}, \param{const wxString\& }{file = NULL}}
-Writes a resource value into the resource database (for example, WIN.INI, or
-.Xdefaults). If {\it file} is NULL, WIN.INI or .Xdefaults is used,
-otherwise the specified file is used.
+\membersection{wxULL}\label{wxull}
-Under X, the resource databases are cached until the internal function
-\rtfsp{\bf wxFlushResources} is called automatically on exit, when
-all updated resource databases are written to their files.
+\func{wxLongLong\_t}{wxULL}{\param{}{number}}
-Note that it is considered bad manners to write to the .Xdefaults
-file under Unix, although the WIN.INI file is fair game under Windows.
+This macro is defined for the platforms with a native 64 bit integer type and
+allows to define unsigned 64 bit compile time constants:
-See also \helpref{wxGetResource}{wxgetresource}, \helpref{wxConfigBase}{wxconfigbase}.
+\begin{verbatim}
+ #ifdef wxLongLong_t
+ unsigned wxLongLong_t ll = wxULL(0x1234567890abcdef);
+ #endif
+\end{verbatim}
\wxheading{Include files}
-<wx/utils.h>
+<wx/longlong.h>
-\membersection{::wxYield}\label{wxyield}
+\wxheading{See also}
-\func{bool}{wxYield}{\void}
+\helpref{wxLL}{wxll}, \helpref{wxLongLong}{wxlonglong}
-Calls \helpref{wxApp::Yield}{wxappyield}.
-This function is kept only for backwards compatibility, please use the
-wxApp method instead in any new code.
+\membersection{wxVaCopy}\label{wxvacopy}
-\wxheading{Include files}
+\func{void}{wxVaCopy}{\param{va\_list }{argptrDst}, \param{va\_list}{ argptrSrc}}
-<wx/app.h> or <wx/utils.h>
+This macro is the same as the standard C99 \texttt{va\_copy} for the compilers
+which support it or its replacement for those that don't. It must be used to
+preserve the value of a \texttt{va\_list} object if you need to use it after
+passing it to another function because it can be modified by the latter.
-\membersection{::wxWakeUpIdle}\label{wxwakeupidle}
+As with \texttt{va\_start}, each call to \texttt{wxVaCopy} must have a matching
+\texttt{va\_end}.
-\func{void}{wxWakeUpIdle}{\void}
-This functions wakes up the (internal and platform dependent) idle system, i.e. it
-will force the system to send an idle event even if the system currently {\it is}
- idle and thus would not send any idle event until after some other event would get
-sent. This is also useful for sending events between two threads and is used by
-the corresponding functions \helpref{::wxPostEvent}{wxpostevent} and
-\helpref{wxEvtHandler::AddPendingEvent}{wxevthandleraddpendingevent}.
-\wxheading{Include files}
+\membersection{\_\_WXFUNCTION\_\_}\label{wxfunction}
-<wx/app.h>
+\func{}{\_\_WXFUNCTION\_\_}{\void}
+
+This macro expands to the name of the current function if the compiler supports
+any of \texttt{\_\_FUNCTION\_\_}, \texttt{\_\_func\_\_} or equivalent variables
+or macros or to \NULL if none of them is available.
-\section{Macros}\label{macros}
-These macros are defined in wxWindows.
+
+\section{Byte order macros}\label{byteordermacros}
+
+The endian-ness issues (that is the difference between big-endian and
+little-endian architectures) are important for the portable programs working
+with the external binary data (for example, data files or data coming from
+network) which is usually in some fixed, platform-independent format. The
+macros are helpful for transforming the data to the correct format.
+
\membersection{wxINTXX\_SWAP\_ALWAYS}\label{intswapalways}
\func{wxUint16}{wxUINT16\_SWAP\_ALWAYS}{\param{wxUint16 }{value}}
-This macro will swap the bytes of the {\it value} variable from little
-endian to big endian or vice versa.
+These macros will swap the bytes of the {\it value} variable from little
+endian to big endian or vice versa unconditionally, i.e. independently of the
+current platform.
+
\membersection{wxINTXX\_SWAP\_ON\_BE}\label{intswaponbe}
been compiled on a little-endian architecture, the value will be unchanged.
Use these macros to read data from and write data to a file that stores
-data in little endian (Intel i386) format.
+data in little-endian (for example Intel i386) format.
+
\membersection{wxINTXX\_SWAP\_ON\_LE}\label{intswaponle}
been compiled on a big-endian architecture, the value will be unchanged.
Use these macros to read data from and write data to a file that stores
-data in big endian format.
+data in big-endian format.
+
+
+\membersection{wxFORCE\_LINK\_THIS\_MODULE}\label{wxforcelinkthismodule}
+
+\func{}{wxFORCE\_LINK\_THIS\_MODULE}{moduleName}
+
+This macro can be used in conjunction with the
+\helpref{wxFORCE\_LINK\_MODULE}{wxforcelinkmodule} macro to force
+the linker to include in its output a specific object file.
+
+In particular, you should use this macro in the source file which you want
+to force for inclusion. The \tt{moduleName} needs to be a name not already
+in use in other \tt{wxFORCE\_LINK\_THIS\_MODULE} macros, but is not required
+to be e.g. the same name of the source file (even if it's a good choice).
+
+\wxheading{Include files}
+
+<wx/link.h>
+
+
+\membersection{wxFORCE\_LINK\_MODULE}\label{wxforcelinkmodule}
+
+\func{}{wxFORCE\_LINK\_MODULE}{moduleName}
+
+This macro can be used in conjunction with the
+\helpref{wxFORCE\_LINK\_THIS\_MODULE}{wxforcelinkthismodule} macro to force
+the linker to include in its output a specific object file.
+
+In particular, you should use this macro in a source file which you know
+for sure is linked in the output (e.g. the source file containing the "main()"
+of your app). The \tt{moduleName} is the name of the module you want to forcefully link
+(i.e. the name you used in the relative \helpref{wxFORCE\_LINK\_THIS\_MODULE}{wxforcelinkthismodule} macro.
+
+\wxheading{Include files}
+
+<wx/link.h>
+
+
+\membersection{wxIMPLEMENT\_APP}\label{wximplementapp}
+
+\func{}{wxIMPLEMENT\_APP}{className}
+
+This is used in the application class implementation file to make the application class
+known to wxWidgets for dynamic construction. You use this as:
+
+\begin{verbatim}
+ wxIMPLEMENT_APP(MyApp)
+\end{verbatim}
+
+See also \helpref{wxDECLARE\_APP}{wxdeclareapp}.
+
+\wxheading{Include files}
+
+<wx/app.h>
+
+
+\section{RTTI functions}\label{rttimacros}
+
+wxWidgets uses its own RTTI ("run-time type identification") system which
+predates the current standard C++ RTTI and so is kept for backwards
+compatibility reasons but also because it allows some things which the
+standard RTTI doesn't directly support (such as creating a class from its
+name).
+
+The standard C++ RTTI can be used in the user code without any problems and in
+general you shouldn't need to use the functions and the macros in this section
+unless you are thinking of modifying or adding any wxWidgets classes.
+
+\wxheading{See also}
+
+\helpref{RTTI overview}{runtimeclassoverview}
+
\membersection{CLASSINFO}\label{classinfo}
<wx/object.h>
-\membersection{DECLARE\_ABSTRACT\_CLASS}
+
+\membersection{DECLARE\_ABSTRACT\_CLASS}\label{declareabstractclass}
\func{}{DECLARE\_ABSTRACT\_CLASS}{className}
<wx/object.h>
+
\membersection{DECLARE\_APP}\label{declareapp}
\func{}{DECLARE\_APP}{className}
-This is used in headers to create a forward declaration of the wxGetApp function implemented
-by IMPLEMENT\_APP. It creates the declaration {\tt className\& wxGetApp(void)}.
+This is used in headers to create a forward declaration of the
+\helpref{wxGetApp}{wxgetapp} function implemented by
+\helpref{IMPLEMENT\_APP}{implementapp}. It creates the declaration
+{\tt className\& wxGetApp(void)}.
Example:
<wx/app.h>
-\membersection{DECLARE\_CLASS}
+
+\membersection{DECLARE\_CLASS}\label{declareclass}
\func{}{DECLARE\_CLASS}{className}
<wx/object.h>
-\membersection{DECLARE\_DYNAMIC\_CLASS}
+
+\membersection{DECLARE\_DYNAMIC\_CLASS}\label{declaredynamicclass}
\func{}{DECLARE\_DYNAMIC\_CLASS}{className}
-Used inside a class declaration to declare that the objects of this class should be dynamically
-creatable from run-time type information.
+Used inside a class declaration to make the class known to wxWidgets RTTI
+system and also declare that the objects of this class should be dynamically
+creatable from run-time type information. Notice that this implies that the
+class should have a default constructor, if this is not the case consider using
+\helpref{DECLARE\_CLASS}{declareclass}.
Example:
DECLARE_DYNAMIC_CLASS(wxFrame)
private:
- const wxString\& frameTitle;
+ const wxString& frameTitle;
public:
...
};
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS}
+
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS}\label{implementabstractclass}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}
+
+\membersection{IMPLEMENT\_ABSTRACT\_CLASS2}\label{implementabstractclass2}
\func{}{IMPLEMENT\_ABSTRACT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
+
\membersection{IMPLEMENT\_APP}\label{implementapp}
\func{}{IMPLEMENT\_APP}{className}
This is used in the application class implementation file to make the application class known to
-wxWindows for dynamic construction. You use this instead of
+wxWidgets for dynamic construction. You use this instead of
Old form:
<wx/app.h>
-\membersection{IMPLEMENT\_CLASS}
+
+\membersection{IMPLEMENT\_CLASS}\label{implementclass}
\func{}{IMPLEMENT\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_CLASS2}
+
+\membersection{IMPLEMENT\_CLASS2}\label{implementclass2}
\func{}{IMPLEMENT\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS}
+
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS}\label{implementdynamicclass}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS}{className, baseClassName}
<wx/object.h>
-\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}
+
+\membersection{IMPLEMENT\_DYNAMIC\_CLASS2}\label{implementdynamicclass2}
\func{}{IMPLEMENT\_DYNAMIC\_CLASS2}{className, baseClassName1, baseClassName2}
<wx/object.h>
-\membersection{wxBITMAP}\label{wxbitmapmacro}
-
-\func{}{wxBITMAP}{bitmapName}
-
-This macro loads a bitmap from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating bitmaps.
-
-\wxheading{See also}
-
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxICON}{wxiconmacro}
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
\membersection{wxConstCast}\label{wxconstcast}
\wxheading{See also}
+\helpref{wx\_const\_cast}{wxconstcastraw}\\
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxStaticCast}{wxstaticcast}
+
+\membersection{::wxCreateDynamicObject}\label{wxcreatedynamicobject}
+
+\func{wxObject *}{wxCreateDynamicObject}{\param{const wxString\& }{className}}
+
+Creates and returns an object of the given class, if the class has been
+registered with the dynamic class system using DECLARE... and IMPLEMENT... macros.
+
+
\membersection{WXDEBUG\_NEW}\label{debugnew}
\func{}{WXDEBUG\_NEW}{arg}
<wx/object.h>
+
\membersection{wxDynamicCast}\label{wxdynamiccast}
\func{classname *}{wxDynamicCast}{ptr, classname}
This macro returns the pointer {\it ptr} cast to the type {\it classname *} if
-the pointer is of this type (the check is done during the run-time) or
+the pointer is of this type (the check is done during the run-time) or
{\tt NULL} otherwise. Usage of this macro is preferred over obsoleted
wxObject::IsKindOf() function.
\helpref{RTTI overview}{runtimeclassoverview}\\
\helpref{wxDynamicCastThis}{wxdynamiccastthis}\\
\helpref{wxConstCast}{wxconstcast}\\
-\helpref{wxStatiicCast}{wxstaticcast}
+\helpref{wxStaticCast}{wxstaticcast}
+
\membersection{wxDynamicCastThis}\label{wxdynamiccastthis}
This macro is equivalent to {\tt wxDynamicCast(this, classname)} but the
latter provokes spurious compilation warnings from some compilers (because it
-tests whether {\tt this} pointer is non {\tt NULL} which is always true), so
+tests whether {\tt this} pointer is non-{\tt NULL} which is always true), so
this macro should be used to avoid them.
\wxheading{See also}
\helpref{wxDynamicCast}{wxdynamiccast}
-\membersection{wxICON}\label{wxiconmacro}
-
-\func{}{wxICON}{iconName}
-
-This macro loads an icon from either application resources (on the platforms
-for which they exist, i.e. Windows and OS2) or from an XPM file. It allows to
-avoid using {\tt \#ifdef}s when creating icons.
-
-\wxheading{See also}
-
-\helpref{Bitmaps and icons overview}{wxbitmapoverview},
-\helpref{wxBITMAP}{wxbitmapmacro}
-
-\wxheading{Include files}
-
-<wx/gdicmn.h>
\membersection{wxStaticCast}\label{wxstaticcast}
result if {\tt wxDynamicCast(ptr, classname) == NULL}) and then returns the
result of executing an equivalent of {\tt static\_cast<classname *>(ptr)}.
+\wxheading{See also}
+
+\helpref{wx\_static\_cast}{wxstaticcastraw}\\
\helpref{wxDynamicCast}{wxdynamiccast}\\
\helpref{wxConstCast}{wxconstcast}
-\membersection{WXTRACE}\label{trace}
-
-\wxheading{Include files}
-
-<wx/object.h>
-
-\func{}{WXTRACE}{formatString, ...}
-
-Calls wxTrace with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-
-This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\membersection{WXTRACELEVEL}\label{tracelevel}
-
-\func{}{WXTRACELEVEL}{level, formatString, ...}
-
-Calls wxTraceLevel with printf-style variable argument syntax. Output
-is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
-The first argument should be the level at which this information is appropriate.
-It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
-this value.
-
-This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-
-\wxheading{Include files}
-
-<wx/memory.h>
-
-\section{wxWindows resource functions}\label{resourcefuncs}
-
-\overview{wxWindows resource system}{resourceformats}
-
-This section details functions for manipulating wxWindows (.WXR) resource
-files and loading user interface elements from resources.
-
-\normalbox{Please note that this use of the word `resource' is different from that used when talking
-about initialisation file resource reading and writing, using such functions
-as wxWriteResource and wxGetResource. It is just an unfortunate clash of terminology.}
-
-\helponly{For an overview of the wxWindows resource mechanism, see \helpref{the wxWindows resource system}{resourceformats}.}
-
-See also \helpref{wxWindow::LoadFromResource}{wxwindowloadfromresource} for
-loading from resource data.
-
-\membersection{::wxResourceAddIdentifier}\label{wxresourceaddidentifier}
-
-\func{bool}{wxResourceAddIdentifier}{\param{const wxString\& }{name}, \param{int }{value}}
-
-Used for associating a name with an integer identifier (equivalent to dynamically\rtfsp
-\tt{#}defining a name to an integer). Unlikely to be used by an application except
-perhaps for implementing resource functionality for interpreted languages.
-
-\membersection{::wxResourceClear}
-
-\func{void}{wxResourceClear}{\void}
-Clears the wxWindows resource table.
+\membersection{wx\_const\_cast}\label{wxconstcastraw}
-\membersection{::wxResourceCreateBitmap}
+\func{T}{wx\_const\_cast}{T, x}
-\func{wxBitmap *}{wxResourceCreateBitmap}{\param{const wxString\& }{resource}}
+Same as \texttt{const\_cast<T>(x)} if the compiler supports const cast or
+\texttt{(T)x} for old compilers. Unlike \helpref{wxConstCast}{wxconstcast},
+the cast it to the type \arg{T} and not to \texttt{T *} and also the order of
+arguments is the same as for the standard cast.
-Creates a new bitmap from a file, static data, or Windows resource, given a valid
-wxWindows bitmap resource identifier. For example, if the .WXR file contains
-the following:
+\wxheading{See also}
-\begin{verbatim}
-static const wxString\& project_resource = "bitmap(name = 'project_resource',\
- bitmap = ['project', wxBITMAP_TYPE_BMP_RESOURCE, 'WINDOWS'],\
- bitmap = ['project.xpm', wxBITMAP_TYPE_XPM, 'X']).";
-\end{verbatim}
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
-then this function can be called as follows:
-\begin{verbatim}
- wxBitmap *bitmap = wxResourceCreateBitmap("project_resource");
-\end{verbatim}
+\membersection{wx\_reinterpret\_cast}\label{wxreinterpretcastraw}
-\membersection{::wxResourceCreateIcon}
+\func{T}{wx\_reinterpret\_cast}{T, x}
-\func{wxIcon *}{wxResourceCreateIcon}{\param{const wxString\& }{resource}}
+Same as \texttt{reinterpret\_cast<T>(x)} if the compiler supports reinterpret cast or
+\texttt{(T)x} for old compilers.
-Creates a new icon from a file, static data, or Windows resource, given a valid
-wxWindows icon resource identifier. For example, if the .WXR file contains
-the following:
+\wxheading{See also}
-\begin{verbatim}
-static const wxString\& project_resource = "icon(name = 'project_resource',\
- icon = ['project', wxBITMAP_TYPE_ICO_RESOURCE, 'WINDOWS'],\
- icon = ['project', wxBITMAP_TYPE_XBM_DATA, 'X']).";
-\end{verbatim}
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_static\_cast}{wxstaticcastraw}
-then this function can be called as follows:
-\begin{verbatim}
- wxIcon *icon = wxResourceCreateIcon("project_resource");
-\end{verbatim}
+\membersection{wx\_static\_cast}\label{wxstaticcastraw}
-\membersection{::wxResourceCreateMenuBar}
+\func{T}{wx\_static\_cast}{T, x}
-\func{wxMenuBar *}{wxResourceCreateMenuBar}{\param{const wxString\& }{resource}}
+Same as \texttt{static\_cast<T>(x)} if the compiler supports static cast or
+\texttt{(T)x} for old compilers. Unlike \helpref{wxStaticCast}{wxstaticcast},
+there are no checks being done and the meaning of the macro arguments is exactly
+the same as for the standard static cast, i.e. \arg{T} is the full type name and
+star is not appended to it.
-Creates a new menu bar given a valid wxWindows menubar resource
-identifier. For example, if the .WXR file contains the following:
+\wxheading{See also}
-\begin{verbatim}
-static const wxString\& menuBar11 = "menu(name = 'menuBar11',\
- menu = \
- [\
- ['&File', 1, '', \
- ['&Open File', 2, 'Open a file'],\
- ['&Save File', 3, 'Save a file'],\
- [],\
- ['E&xit', 4, 'Exit program']\
- ],\
- ['&Help', 5, '', \
- ['&About', 6, 'About this program']\
- ]\
- ]).";
-\end{verbatim}
+\helpref{wx\_const\_cast}{wxconstcastraw},\\
+\helpref{wx\_reinterpret\_cast}{wxreinterpretcastraw},\\
+\helpref{wx\_truncate\_cast}{wxtruncatecast}
-then this function can be called as follows:
-\begin{verbatim}
- wxMenuBar *menuBar = wxResourceCreateMenuBar("menuBar11");
-\end{verbatim}
+\membersection{wx\_truncate\_cast}\label{wxtruncatecast}
+\func{T}{wx\_truncate\_cast}{T, x}
-\membersection{::wxResourceGetIdentifier}
+This case doesn't correspond to any standard cast but exists solely to make
+casts which possibly result in a truncation of an integer value more readable.
-\func{int}{wxResourceGetIdentifier}{\param{const wxString\& }{name}}
+\wxheading{See also}
-Used for retrieving the integer value associated with an identifier.
-A zero value indicates that the identifier was not found.
+\helpref{wx\_static\_cast}{wxstaticcastraw}
-See \helpref{wxResourceAddIdentifier}{wxresourceaddidentifier}.
-\membersection{::wxResourceParseData}\label{wxresourcedata}
+\section{Log functions}\label{logfunctions}
-\func{bool}{wxResourceParseData}{\param{const wxString\& }{resource}, \param{wxResourceTable *}{table = NULL}}
+These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
+further information. The functions use (implicitly) the currently active log
+target, so their descriptions here may not apply if the log target is not the
+standard one (installed by wxWidgets in the beginning of the program).
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
+\wxheading{Include files}
-{\it resource} should contain data in the following form:
+<wx/log.h>
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
-This function will typically be used after including a {\tt .wxr} file into
-a C++ program as follows:
+\membersection{::wxDebugMsg}\label{wxdebugmsg}
-\begin{verbatim}
-#include "dialog1.wxr"
-\end{verbatim}
+\func{void}{wxDebugMsg}{\param{const wxString\& }{fmt}, \param{...}{}}
-Each of the contained resources will declare a new C++ variable, and each
-of these variables should be passed to wxResourceParseData.
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log
+functions}{logfunctions} and \helpref{wxLogDebug}{wxlogdebug} in particular.
-\membersection{::wxResourceParseFile}
+Display a debugging message; under Windows, this will appear on the
+debugger command window, and under Unix, it will be written to standard
+error.
-\func{bool}{wxResourceParseFile}{\param{const wxString\& }{filename}, \param{wxResourceTable *}{table = NULL}}
+The syntax is identical to {\bf printf}: pass a format string and a
+variable list of arguments.
-Parses a file containing one or more wxWindows resource objects
-in C++-compatible syntax. Use this function to dynamically load
-wxWindows resource data.
+{\bf Tip:} under Windows, if your application crashes before the
+message appears in the debugging window, put a wxYield call after
+each wxDebugMsg call. wxDebugMsg seems to be broken under WIN32s
+(at least for Watcom C++): preformat your messages and use OutputDebugString
+instead.
-\membersection{::wxResourceParseString}\label{wxresourceparsestring}
+\wxheading{Include files}
-\func{bool}{wxResourceParseString}{\param{char*}{ s}, \param{wxResourceTable *}{table = NULL}}
+<wx/utils.h>
-Parses a string containing one or more wxWindows resource objects. If
-the resource objects are global static data that are included into the
-C++ program, then this function must be called for each variable
-containing the resource data, to make it known to wxWindows.
-{\it resource} should contain data with the following form:
+\membersection{::wxError}\label{wxerror}
-\begin{verbatim}
-dialog(name = 'dialog1',
- style = 'wxCAPTION | wxDEFAULT_DIALOG_STYLE',
- title = 'Test dialog box',
- x = 312, y = 234, width = 400, height = 300,
- modal = 0,
- control = [1000, wxStaticBox, 'Groupbox', '0', 'group6', 5, 4, 380, 262,
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]],
- control = [1001, wxTextCtrl, '', 'wxTE_MULTILINE', 'text3',
- 156, 126, 200, 70, 'wxWindows is a multi-platform, GUI toolkit.',
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0],
- [11, 'wxSWISS', 'wxNORMAL', 'wxNORMAL', 0]]).
-\end{verbatim}
+\func{void}{wxError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWidgets Internal Error"}}
-This function will typically be used after calling \helpref{wxLoadUserResource}{wxloaduserresource} to
-load an entire {\tt .wxr file} into a string.
+{\bf NB:} This function is now obsolete, please use \helpref{wxLogError}{wxlogerror}
+instead.
-\membersection{::wxResourceRegisterBitmapData}\label{registerbitmapdata}
+Displays {\it msg} and continues. This writes to standard error under
+Unix, and pops up a message box under Windows. Used for internal
+wxWidgets errors. See also \helpref{wxFatalError}{wxfatalerror}.
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char* }{xbm\_data}, \param{int }{width},
-\param{int }{height}, \param{wxResourceTable *}{table = NULL}}
+\wxheading{Include files}
-\func{bool}{wxResourceRegisterBitmapData}{\param{const wxString\& }{name}, \param{char** }{xpm\_data}}
+<wx/utils.h>
-Makes \tt{#}included XBM or XPM bitmap data known to the wxWindows resource system.
-This is required if other resources will use the bitmap data, since otherwise there
-is no connection between names used in resources, and the global bitmap data.
-\membersection{::wxResourceRegisterIconData}
+\membersection{::wxFatalError}\label{wxfatalerror}
-Another name for \helpref{wxResourceRegisterBitmapData}{registerbitmapdata}.
+\func{void}{wxFatalError}{\param{const wxString\& }{msg}, \param{const wxString\& }{title = "wxWidgets Fatal Error"}}
-\section{Log functions}\label{logfunctions}
+{\bf NB:} This function is now obsolete, please use
+\helpref{wxLogFatalError}{wxlogfatalerror} instead.
-These functions provide a variety of logging functions: see \helpref{Log classes overview}{wxlogoverview} for
-further information. The functions use (implicitly) the currently active log
-target, so their descriptions here may not apply if the log target is not the
-standard one (installed by wxWindows in the beginning of the program).
+Displays {\it msg} and exits. This writes to standard error under Unix,
+and pops up a message box under Windows. Used for fatal internal
+wxWidgets errors. See also \helpref{wxError}{wxerror}.
\wxheading{Include files}
-<wx/log.h>
+<wx/utils.h>
+
\membersection{::wxLogError}\label{wxlogerror}
-\func{void}{wxLogError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogError}{\param{const char *}{formatString}, \param{...}{}}
-The function to use for error messages, i.e. the messages that must be shown
+\func{void}{wxVLogError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+The functions to use for error messages, i.e. the messages that must be shown
to the user. The default processing is to pop up a message box to inform the
user about it.
+
\membersection{::wxLogFatalError}\label{wxlogfatalerror}
-\func{void}{wxLogFatalError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogFatalError}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogFatalError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
Like \helpref{wxLogError}{wxlogerror}, but also
terminates the program with the exit code 3. Using {\it abort()} standard
function also terminates the program with this exit code.
+
\membersection{::wxLogWarning}\label{wxlogwarning}
-\func{void}{wxLogWarning}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogWarning}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogWarning}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For warnings - they are also normally shown to the user, but don't interrupt
the program work.
+
\membersection{::wxLogMessage}\label{wxlogmessage}
-\func{void}{wxLogMessage}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogMessage}{\param{const char *}{formatString}, \param{...}{}}
-for all normal, informational messages. They also appear in a message box by
-default (but it can be changed). Notice that the standard behaviour is to not
-show informational messages if there are any errors later - the logic being
-that the later error messages make the informational messages preceding them
-meaningless.
+\func{void}{wxVLogMessage}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+For all normal, informational messages. They also appear in a message box by
+default (but it can be changed).
\membersection{::wxLogVerbose}\label{wxlogverbose}
-\func{void}{wxLogVerbose}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogVerbose}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogVerbose}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
For verbose output. Normally, it is suppressed, but
might be activated if the user wishes to know more details about the program
progress (another, but possibly confusing name for the same function is {\bf wxLogInfo}).
+
\membersection{::wxLogStatus}\label{wxlogstatus}
-\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogStatus}{\param{wxFrame *}{frame}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
-\func{void}{wxLogStatus}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogStatus}{\param{const char *}{formatString}, \param{...}{}}
-Messages logged by this function will appear in the statusbar of the {\it
+\func{void}{wxVLogStatus}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+Messages logged by these functions will appear in the statusbar of the {\it
frame} or of the top level application window by default (i.e. when using
-the second version of the function).
+the second version of the functions).
If the target frame doesn't have a statusbar, the message will be lost.
+
\membersection{::wxLogSysError}\label{wxlogsyserror}
-\func{void}{wxLogSysError}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogSysError}{\param{const char *}{formatString}, \param{...}{}}
-Mostly used by wxWindows itself, but might be handy for logging errors after
+\func{void}{wxVLogSysError}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+Mostly used by wxWidgets itself, but might be handy for logging errors after
system call (API function) failure. It logs the specified message text as well
as the last system error code ({\it errno} or {\it ::GetLastError()} depending
on the platform) and the corresponding error message. The second form
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxSysErrorMsg}{wxsyserrormsg}
+
\membersection{::wxLogDebug}\label{wxlogdebug}
-\func{void}{wxLogDebug}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogDebug}{\param{const char *}{formatString}, \param{...}{}}
-The right function for debug output. It only does anything at all in the debug
-mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expands to
+\func{void}{wxVLogDebug}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
+The right functions for debug output. They only do something in debug
+mode (when the preprocessor symbol \_\_WXDEBUG\_\_ is defined) and expand to
nothing in release mode (otherwise).
+
\membersection{::wxLogTrace}\label{wxlogtrace}
-\func{void}{wxLogTrace}{\param{const char*}{ formatString}, \param{...}{}}
+\func{void}{wxLogTrace}{\param{const char *}{formatString}, \param{...}{}}
+
+\func{void}{wxVLogTrace}{\param{const char *}{formatString}, \param{va\_list }{argPtr}}
\func{void}{wxLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{const char *}{mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
\func{void}{wxLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{...}{}}
+\func{void}{wxVLogTrace}{\param{wxTraceMask}{ mask}, \param{const char *}{formatString}, \param{va\_list }{argPtr}}
+
As {\bf wxLogDebug}, trace functions only do something in debug build and
expand to nothing in the release one. The reason for making
it a separate function from it is that usually there are a lot of trace
For the second function (taking a string mask), the message is logged only if
the mask has been previously enabled by the call to
-\helpref{AddTraceMask}{wxlogaddtracemask}. The predefined string trace masks
-used by wxWindows are:
+\helpref{AddTraceMask}{wxlogaddtracemask} or by setting
+\helpref{{\tt WXTRACE} environment variable}{envvars}.
+The predefined string trace masks
+used by wxWidgets are:
\begin{itemize}\itemsep=0pt
\item wxTRACE\_MemAlloc: trace memory allocation (new/delete)
\item wxTRACE\_OleCalls: trace OLE method calls (Win32 only)
\end{itemize}
-The third version of the function only logs the message if all the bit
+{\bf Caveats:} since both the mask and the format string are strings,
+this might lead to function signature confusion in some cases:
+if you intend to call the format string only version of wxLogTrace,
+then add a \%s format string parameter and then supply a second string parameter for that \%s, the string mask version of wxLogTrace will erroneously get called instead, since you are supplying two string parameters to the function.
+In this case you'll unfortunately have to avoid having two leading
+string parameters, e.g. by adding a bogus integer (with its \%d format string).
+
+The third version of the function only logs the message if all the bits
corresponding to the {\it mask} are set in the wxLog trace mask which can be
set by \helpref{SetTraceMask}{wxlogsettracemask}. This version is less
flexible than the previous one because it doesn't allow defining the user
\item wxTraceOleCalls: trace OLE method calls (Win32 only)
\end{itemize}
+
+\membersection{::wxSafeShowMessage}\label{wxsafeshowmessage}
+
+\func{void}{wxSafeShowMessage}{\param{const wxString\& }{title}, \param{const wxString\& }{text}}
+
+This function shows a message to the user in a safe way and should be safe to
+call even before the application has been initialized or if it is currently in
+some other strange state (for example, about to crash). Under Windows this
+function shows a message box using a native dialog instead of
+\helpref{wxMessageBox}{wxmessagebox} (which might be unsafe to call), elsewhere
+it simply prints the message to the standard output using the title as prefix.
+
+\wxheading{Parameters}
+
+\docparam{title}{The title of the message box shown to the user or the prefix
+of the message string}
+
+\docparam{text}{The text to show to the user}
+
+\wxheading{See also}
+
+\helpref{wxLogFatalError}{wxlogfatalerror}
+
+\wxheading{Include files}
+
+<wx/log.h>
+
+
\membersection{::wxSysErrorCode}\label{wxsyserrorcode}
\func{unsigned long}{wxSysErrorCode}{\void}
\helpref{wxSysErrorMsg}{wxsyserrormsg},
\helpref{wxLogSysError}{wxlogsyserror}
+
\membersection{::wxSysErrorMsg}\label{wxsyserrormsg}
\func{const wxChar *}{wxSysErrorMsg}{\param{unsigned long }{errCode = 0}}
\helpref{wxSysErrorCode}{wxsyserrorcode},
\helpref{wxLogSysError}{wxlogsyserror}
-\section{Time functions}\label{timefunctions}
-The functions in this section deal with getting the current time and
-starting/stopping the global timers. Please note that the timer functions are
-deprecated because they work with one global timer only and
-\helpref{wxTimer}{wxtimer} and/or \helpref{wxStopWatch}{wxstopwatch} classes
-should be used instead. For retrieving the current time, you may also use
-\helpref{wxDateTime::Now}{wxdatetimenow} or
-\helpref{wxDateTime::UNow}{wxdatetimeunow} methods.
+\membersection{WXTRACE}\label{trace}
+
+\wxheading{Include files}
+
+<wx/object.h>
+
+\func{}{WXTRACE}{formatString, ...}
+
+{\bf NB:} This macro is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Calls wxTrace with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+\membersection{WXTRACELEVEL}\label{tracelevel}
+
+\func{}{WXTRACELEVEL}{level, formatString, ...}
+
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Calls wxTraceLevel with printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
+
+\wxheading{Include files}
+
+<wx/memory.h>
+
+
+\membersection{::wxTrace}\label{wxtrace}
+
+\func{void}{wxTrace}{\param{const wxString\& }{fmt}, \param{...}{}}
+
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
+
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+
+\wxheading{Include files}
+
+<wx/memory.h>
-\membersection{::wxGetElapsedTime}\label{wxgetelapsedtime}
-\func{long}{wxGetElapsedTime}{\param{bool}{ resetTimer = TRUE}}
+\membersection{::wxTraceLevel}\label{wxtracelevel}
-Gets the time in milliseconds since the last \helpref{::wxStartTimer}{wxstarttimer}.
+\func{void}{wxTraceLevel}{\param{int}{ level}, \param{const wxString\& }{fmt}, \param{...}{}}
-If {\it resetTimer} is TRUE (the default), the timer is reset to zero
-by this call.
+{\bf NB:} This function is now obsolete, replaced by \helpref{Log functions}{logfunctions}.
-See also \helpref{wxTimer}{wxtimer}.
+Takes printf-style variable argument syntax. Output
+is directed to the current output stream (see \helpref{wxDebugContext}{wxdebugcontextoverview}).
+The first argument should be the level at which this information is appropriate.
+It will only be output if the level returned by wxDebugContext::GetLevel is equal to or greater than
+this value.
\wxheading{Include files}
-<wx/timer.h>
+<wx/memory.h>
+
+
+
+\section{Time functions}\label{timefunctions}
+
+The functions in this section deal with getting the current time and sleeping
+for the specified time interval.
+
\membersection{::wxGetLocalTime}\label{wxgetlocaltime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
+
\membersection{::wxGetLocalTimeMillis}\label{wxgetlocaltimemillis}
-\func{wxLongLone}{wxGetLocalTimeMillis}{\void}
+\func{wxLongLong}{wxGetLocalTimeMillis}{\void}
Returns the number of milliseconds since local time 00:00:00 Jan 1st 1970.
\wxheading{See also}
\helpref{wxDateTime::Now}{wxdatetimenow},\\
-\helpref{wxLongLone}{wxlonglong}
+\helpref{wxLongLong}{wxlonglong}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
+
\membersection{::wxGetUTCTime}\label{wxgetutctime}
\wxheading{Include files}
-<wx/timer.h>
+<wx/stopwatch.h>
+
+
+\membersection{::wxMicroSleep}\label{wxmicrosleep}
+
+\func{void}{wxMicroSleep}{\param{unsigned long}{ microseconds}}
+
+Sleeps for the specified number of microseconds. The microsecond resolution may
+not, in fact, be available on all platforms (currently only Unix platforms with
+nanosleep(2) may provide it) in which case this is the same as
+\helpref{wxMilliSleep}{wxmillisleep}(\arg{microseconds}$/1000$).
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxMilliSleep}\label{wxmillisleep}
+
+\func{void}{wxMilliSleep}{\param{unsigned long}{ milliseconds}}
+
+Sleeps for the specified number of milliseconds. Notice that usage of this
+function is encouraged instead of calling usleep(3) directly because the
+standard usleep() function is not MT safe.
+
+\wxheading{Include files}
+
+<wx/utils.h>
+
+
+\membersection{::wxNow}\label{wxnow}
+
+\func{wxString}{wxNow}{\void}
+
+Returns a string representing the current date and time.
+
+\wxheading{Include files}
+
+<wx/utils.h>
-\membersection{::wxStartTimer}\label{wxstarttimer}
-\func{void}{wxStartTimer}{\void}
+\membersection{::wxSleep}\label{wxsleep}
-Starts a stopwatch; use \helpref{::wxGetElapsedTime}{wxgetelapsedtime} to get the elapsed time.
+\func{void}{wxSleep}{\param{int}{ secs}}
-See also \helpref{wxTimer}{wxtimer}.
+Sleeps for the specified number of seconds.
\wxheading{Include files}
-<wx/timer.h>
+<wx/utils.h>
+
+
+\membersection{::wxUsleep}\label{wxusleep}
+
+\func{void}{wxUsleep}{\param{unsigned long}{ milliseconds}}
+
+This function is deprecated because its name is misleading: notice that the
+argument is in milliseconds, not microseconds. Please use either
+\helpref{wxMilliSleep}{wxmillisleep} or \helpref{wxMicroSleep}{wxmicrosleep}
+depending on the resolution you need.
+
+
\section{Debugging macros and functions}\label{debugmacros}
-Useful macros and functions for error checking and defensive programming. ASSERTs are only
-compiled if \_\_WXDEBUG\_\_ is defined, whereas CHECK macros stay in release
-builds.
+Useful macros and functions for error checking and defensive programming.
+wxWidgets defines three families of the assert-like macros:
+the wxASSERT and wxFAIL macros only do anything if \_\_WXDEBUG\_\_ is defined
+(in other words, in the debug build) but disappear completely in the release
+build. On the other hand, the wxCHECK macros stay event in release builds but a
+check failure doesn't generate any user-visible effects then. Finally, the
+compile time assertions don't happen during the run-time but result in the
+compilation error messages if the condition they check fail.
\wxheading{Include files}
<wx/debug.h>
+
\membersection{::wxOnAssert}\label{wxonassert}
-\func{void}{wxOnAssert}{\param{const char*}{ fileName}, \param{int}{ lineNumber}, \param{const char*}{ msg = NULL}}
+\func{void}{wxOnAssert}{\param{const char *}{fileName}, \param{int}{ lineNumber}, \param{const char *}{func}, \param{const char *}{cond}, \param{const char *}{msg = NULL}}
+
+This function is called whenever one of debugging macros fails (i.e. condition
+is false in an assertion). It is only defined in the debug mode, in release
+builds the \helpref{wxCHECK}{wxcheck} failures don't result in anything.
+
+To override the default behaviour in the debug builds which is to show the user
+a dialog asking whether he wants to abort the program, continue or continue
+ignoring any subsequent assert failures, you may override
+\helpref{wxApp::OnAssertFailure}{wxapponassertfailure} which is called by this function if
+the global application object exists.
-This function may be redefined to do something non trivial and is called
-whenever one of debugging macros fails (i.e. condition is false in an
-assertion).
-% TODO: this should probably be an overridable in wxApp.
\membersection{wxASSERT}\label{wxassert}
\func{}{wxASSERT}{\param{}{condition}}
-Assert macro. An error message will be generated if the condition is FALSE in
+Assert macro. An error message will be generated if the condition is false in
debug mode, but nothing will be done in the release build.
Please note that the condition in wxASSERT() should have no side effects
because it will not be executed in release mode at all.
-See also: \helpref{wxASSERT\_MSG}{wxassertmsg}
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+
+\membersection{wxASSERT\_MIN\_BITSIZE}\label{wxassertminbitsize}
+
+\func{}{wxASSERT\_MIN\_BITSIZE}{\param{}{type}, \param{}{size}}
+
+This macro results in a
+\helpref{compile time assertion failure}{wxcompiletimeassert} if the size
+of the given type {\it type} is less than {\it size} bits.
+
+You may use it like this, for example:
+
+\begin{verbatim}
+ // we rely on the int being able to hold values up to 2^32
+ wxASSERT_MIN_BITSIZE(int, 32);
+
+ // can't work with the platforms using UTF-8 for wchar_t
+ wxASSERT_MIN_BITSIZE(wchar_t, 16);
+\end{verbatim}
+
\membersection{wxASSERT\_MSG}\label{wxassertmsg}
\func{}{wxASSERT\_MSG}{\param{}{condition}, \param{}{msg}}
-Assert macro with message. An error message will be generated if the condition is FALSE.
+Assert macro with message. An error message will be generated if the condition is false.
+
+\wxheading{See also}
+
+\helpref{wxASSERT}{wxassert},\\
+\helpref{wxCOMPILE\_TIME\_ASSERT}{wxcompiletimeassert}
+
+
+\membersection{wxCOMPILE\_TIME\_ASSERT}\label{wxcompiletimeassert}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}}
+
+Using {\tt wxCOMPILE\_TIME\_ASSERT} results in a compilation error if the
+specified {\it condition} is false. The compiler error message should include
+the {\it msg} identifier - please note that it must be a valid C++ identifier
+and not a string unlike in the other cases.
+
+This macro is mostly useful for testing the expressions involving the
+{\tt sizeof} operator as they can't be tested by the preprocessor but it is
+sometimes desirable to test them at the compile time.
+
+Note that this macro internally declares a struct whose name it tries to make
+unique by using the {\tt \_\_LINE\_\_} in it but it may still not work if you
+use it on the same line in two different source files. In this case you may
+either change the line in which either of them appears on or use the
+\helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2} macro.
+
+Also note that Microsoft Visual C++ has a bug which results in compiler errors
+if you use this macro with `Program Database For Edit And Continue'
+(\texttt{/ZI}) option, so you shouldn't use it (`Program Database'
+(\texttt{/Zi}) is ok though) for the code making use of this macro.
+
+\wxheading{See also}
+
+\helpref{wxASSERT\_MSG}{wxassertmsg},\\
+\helpref{wxASSERT\_MIN\_BITSIZE}{wxassertminbitsize}
+
+
+\membersection{wxCOMPILE\_TIME\_ASSERT2}\label{wxcompiletimeassert2}
+
+\func{}{wxCOMPILE\_TIME\_ASSERT}{\param{}{condition}, \param{}{msg}, \param{}{name}}
+
+This macro is identical to \helpref{wxCOMPILE\_TIME\_ASSERT2}{wxcompiletimeassert2}
+except that it allows you to specify a unique {\it name} for the struct
+internally defined by this macro to avoid getting the compilation errors
+described \helpref{above}{wxcompiletimeassert}.
-See also: \helpref{wxASSERT}{wxassert}
\membersection{wxFAIL}\label{wxfail}
See also: \helpref{wxFAIL\_MSG}{wxfailmsg}
+
\membersection{wxFAIL\_MSG}\label{wxfailmsg}
\func{}{wxFAIL\_MSG}{\param{}{msg}}
it may be used in the "default:" branch of a switch statement if all possible
cases are processed above.
-See also: \helpref{wxFAIL}{wxfail}
+\wxheading{See also}
+
+\helpref{wxFAIL}{wxfail}
+
\membersection{wxCHECK}\label{wxcheck}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
+
\membersection{wxCHECK\_MSG}\label{wxcheckmsg}
\func{}{wxCHECK\_MSG}{\param{}{condition}, \param{}{retValue}, \param{}{msg}}
Checks that the condition is true, returns with the given return value if not (FAILs in debug mode).
This check is done even in release mode.
-This macro may be only used in non void functions, see also
+This macro may be only used in non-void functions, see also
\helpref{wxCHECK\_RET}{wxcheckret}.
+
\membersection{wxCHECK\_RET}\label{wxcheckret}
\func{}{wxCHECK\_RET}{\param{}{condition}, \param{}{msg}}
This macro should be used in void functions instead of
\helpref{wxCHECK\_MSG}{wxcheckmsg}.
+
\membersection{wxCHECK2}\label{wxcheck2}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}}
This check is done even in release mode.
+
\membersection{wxCHECK2\_MSG}\label{wxcheck2msg}
\func{}{wxCHECK2}{\param{}{condition}, \param{}{operation}, \param{}{msg}}
\helpref{wxFAIL\_MSG}{wxfailmsg} with the specified {\it msg} is called
instead of wxFAIL() if the {\it condition} is false.
+
+\membersection{::wxTrap}\label{wxtrap}
+
+\func{void}{wxTrap}{\void}
+
+In debug mode (when {\tt \_\_WXDEBUG\_\_} is defined) this function generates a
+debugger exception meaning that the control is passed to the debugger if one is
+attached to the process. Otherwise the program just terminates abnormally.
+
+In release mode this function does nothing.
+
+\wxheading{Include files}
+
+<wx/debug.h>
+
+
+
+\membersection{::wxIsDebuggerRunning}\label{wxisdebuggerrunning}
+
+\func{bool}{wxIsDebuggerRunning}{\void}
+
+Returns \true if the program is running under debugger, \false otherwise.
+
+Please note that this function is currently only implemented for Win32 and Mac
+builds using CodeWarrior and always returns \false elsewhere.
+
+
+
+
\section{Environment access functions}\label{environfunctions}
The functions in this section allow to access (get) or change value of
<wx/utils.h>
+
\membersection{wxGetenv}\label{wxgetenvmacro}
\func{wxChar *}{wxGetEnv}{\param{const wxString\&}{ var}}
with \helpref{wxSetEnv}{wxsetenv}, use \helpref{wxGetEnv}{wxgetenv} function
instead.
+
\membersection{wxGetEnv}\label{wxgetenv}
\func{bool}{wxGetEnv}{\param{const wxString\&}{ var}, \param{wxString *}{value}}
{\it value} may be {\tt NULL} if you just want to know if the variable exists
and are not interested in its value.
-Returns {\tt TRUE} if the variable exists, {\tt FALSE} otherwise.
+Returns \true if the variable exists, \false otherwise.
+
\membersection{wxSetEnv}\label{wxsetenv}
-\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxChar *}{value}}
+\func{bool}{wxSetEnv}{\param{const wxString\&}{ var}, \param{const wxString\& }{value}}
Sets the value of the environment variable {\it var} (adding it if necessary)
to {\it value}.
-Returns {\tt TRUE} on success.
+Returns \true on success.
+
+\wxheading{See also}
+
+\helpref{wxUnsetEnv}{wxunsetenv}
+
\membersection{wxUnsetEnv}\label{wxunsetenv}
\helpref{wxGetEnv}{wxgetenv} will return {\tt NULL} after the call to this
function.
-Returns {\tt TRUE} on success.
+Returns \true on success.
+
+\wxheading{See also}
+
+\helpref{wxSetEnv}{wxsetenv}
+
+
+\section{Atomic operations}\label{atomicoperations}
+
+When using multi-threaded applications, it is often required to access or
+modify memory which is shared between threads. Atomic integer and pointer
+operations are an efficient way to handle this issue (another, less efficient,
+way is to use a \helpref{mutex}{wxmutex} or \helpref{critical
+section}{wxcriticalsection}). A native implementation exists for Windows,
+Linux, Solaris and Mac OS X, for other OS, a
+\helpref{wxCriticalSection}{wxcriticalsection} is used to protect the data.
+
+One particular application is reference counting (used by so-called smart
+pointers).
+
+You should define your variable with the type wxAtomicInt in order to apply
+atomic operations to it.
+
+\wxheading{Include files}
+
+<wx/atomic.h>
+
+\membersection{::wxAtomicInc}\label{wxatomicinc}
+
+\func{void}{wxAtomicInc}{\param{wxAtomicInt\& }{value}}
+
+This function increments \arg{value} in an atomic manner.
+
+
+\membersection{::wxAtomicDec}\label{wxatomicdec}
+
+\func{wxInt32}{wxAtomicDec}{\param{wxAtomicInt\& }{value}}
+
+This function decrements \arg{value} in an atomic manner.
+
+Returns 0 if \arg{value} is 0 after decrementation or any non-zero value (not
+necessarily equal to the value of the variable) otherwise.
projects / wxWidgets.git / blobdiff