+#
# makeg95.env
# Common makefile settings for wxWindows programs
-# This file is included by all the other makefiles, thus changes
+# This file is included by all the other makefiles, thus changes
# made here take effect everywhere (except where overriden).
+# The settings are for GnuWin32-derived compilers, i.e. Cygwin and Mingw32.
#
-# An alternative to editing this file is to create a shell script
-# to export specific variables, and call make with the -e switch
-# to override makefile variables. See wx/install/install.txt.
-# And you can override specific variables on the make command line, e.g.
-#
-# make -f makefile.unix WXDEBUG=''
+# Customize this file to match your own settings.
#
-# You may prefer to use the GNU configure script than raw makefiles -
-# see contrib/wxshlib.
+# CVS_ID: $Id$
#
-########################## Compiler ##################################
+# If using Cygwin beta, set this to 0.
+# If using Mingw32 or Cygwin 1.0 or later, set this to 1.
+MINGW32=1
-# C++ compiler
-# For AIX/CSet++: use CC = xlC
-# For IRIX: use CC = CC
-# CC = gcc-2.6.2
-CC = gcc
+# Set to the version you have
+MINGW32VERSION=2.95
-# C compiler for pure C programs
-# Typical: CC=g++ , CCC=gcc
-# CC=cl386 /Tp, CCC=cl386
-#
-# (Used only for XView, file sb_scrol.c)
-#
-CCC = $(CC)
+# If building DLL, the version
+WXVERSION=232
-# Compiler used for LEX generated C
-# AIX: use $(CCC)
-CCLEX=$(CC)
+ifndef UNICODE
+ UNICODE=0
+endif
-MAKE=make
+# Say yes if you have a "modern" linker that supports --shared option.
+# Note that you're probably going to wait forever for dlltool/gcc/etc
+# to build the DLL, so you should really use a newer linker that
+# supports --shared.
+LD_SUPPORTS_SHARED=yes
-# LEX
-LEX=flex.exe -t -L
+# Set to the appropriate remove command (must support forward slashes)
+# You can get a suitable rm.exe from ports/mingw32/extra.zip on the ftp site.
+RM=rm -f
-# YACC. byacc or bison
-# YACC=byacc.exe
-YACC=bison.exe
+# Set to the appropriate copy command (must support forward slashes)
+# You can get a suitable cp.exe from ports/mingw32/extra.zip on the ftp site.
+COPY=cp
-# Resource compiler
-RESCOMP=windres.exe
+# Cross compiling? Provide the target prefix (eg., i386-mingw32-)
+# CROSS=i386-mingw32-
-RESFLAGS=--include-dir $(WXDIR)/include --define __WIN32__ --define __WIN95__ --define __GNUWIN32__
+########################## Compiler ##################################
+
+# C++ compiler
+# Put a comment before --pipe for Cygwin, remove comment for Mingw32 2.95
+
+ifeq ($(MINGW32),1)
+ ifneq "$(findstring 2.95, $(MINGW32VERSION))" ""
+ CC = $(CROSS)gcc --pipe -fvtable-thunks
+ else
+ CC = $(CROSS)gcc
+ endif
+else
+ CC = $(CROSS)gcc
+endif
+
+# C compiler for pure C programs
+CCC = $(CC)
+
+# Compiler used for LEX generated C
+CCLEX=$(CROSS)gcc
+
+# This shouldn't be needed as make is supposed to define this
+# variable itself. Uncomment it if your make complains.
+#MAKE=make
+
+# LEX (currently unused)
+LEX=flex # -t -L
+
+# YACC (currently unused)
+YACC=byacc
+#YACC=bison
+
+# Settings for Cyginw/Mingw32
+# Some versions of windres cannot cope with the --preprocessor
+# option. Uncomment the RCPREPROCESSOR line below if yours can.
+RESCOMP=$(CROSS)windres
+RCINPUTSWITCH=-i
+RCOUTPUTSWITCH=-o
+RCINCSWITCH=--include-dir
+RCDEFSWITCH=--define
+# Note that this can cause windres to fail (Win95/98 problem?)
+# but commenting out RCPREPROCESSOR then does the trick.
+#RCPREPROCESSOR=--preprocessor "$(CC) -c -E -xc-header -DRC_INVOKED"
+
+# Don't make this too long (e.g. by adding contrib/include/wx) because it will
+# truncate the command line
+# Note: --use-temp-file removed since Mingw32 2.95.2 doesn't recognise it
+RESFLAGS=$(RCPREPROCESSOR) $(RCINCSWITCH) $(WXDIR)/include $(RCEXTRAINC) $(RCDEFSWITCH) __WIN32__ $(RCDEFSWITCH) __WIN95__ $(RCDEFSWITCH) __GNUWIN32__
+
+# Needed to build a DLL if your linker does not support --shared option.
+AS = $(CROSS)as
+DLLTOOL = $(CROSS)dlltool
########################## Compiler flags #############################
# Miscellaneous compiler options
-# Solaris/GCC: -DSVR4
-# Solaris/GCC, dynamic library: -DSVR4 -fPIC
-# FreeBDS 2.0: does not need -D_BSD - always defined
-# AIX/CSet++: -+ -qsrcmsg -DSYSV
-# AIX/GCC: -DSYSV -DAIX
-# Data General: -DDG
-# HP: -D_HPUX_SOURCE +a1 -Aa +d -z
-# IRIX: -mips2
-OPTIONS= # -D__MINGW32__ # -D__EGCS__
+# GRG: the __MINGW32__ option is not needed anymore
+# add "-DHAVE_W32API_H" if you have w32api >= 0.5
+OPTIONS = -DSTRICT # -D__MINGW32__
# Debugging information
-# AIX: comment out.
-# IRIX: -g3
-DEBUGFLAGS = -ggdb -D__WXDEBUG__
-
-# Debug/trace mode. 1 or more for debugging.
-WXDEBUG=0
+DEBUGFLAGS = -D__WXDEBUG__
WIN95=1
APPVER=3.50
WINVERSION=-DWINVER=0x0350 -D__GNUWIN32__ -D__WIN32__ # Generic WIN32
else
-APPVER=3.50 # 4.0
+APPVER=4.0 # 3.50
# This means 'enable Windows 95 features' (in wxWindows and in VC++ 4.0).
WINVERSION=-DWINVER=0x0400 -D__WIN95__ -D__GNUWIN32__ -D__WIN32__
endif
RSCSUFF=rsc
# Warnings
-# AIX: comment out
-# IRIX: -w -wlint,-fpiv
-# These are for the GNU compiler. We now get the compiler to check for as
-# many things as we can, to catch portability problems sooner.
WARN = -Wall
-# -pedantic -Wpointer-arith -Wtraditional -Wcast-align \
-# -Wenum-clash -Wnested-externs -Woverloaded-virtual \
-# -Winline -Wconversion
-
-# not good with too few 'const' decls in wxWindows
-# -Wcast-qual -Wwrite-strings
-
-# too hard (problems with system header files)
-# -Wstrict-prototypes -Wmissing-prototypes
-# -Wredudant-decs
-
# Which GUI, -Dwx_xview or -Dwx_motif (don't change this)
-GUI = -D__WXMSW__
+GUI = -D__WXMSW__ -D__WINDOWS__
-# Optimization
-# OPT = -O
-# FreeBSD 2.0 with i486: OPT = -O2 -m486
-# IRIX: -O2 #-O0 : no, -O1: quick, -O2: global -O3: full(register)
-# Linux: -m486 # -O2 for optimization
-OPT =
+# According to Guillermo Rodriguez Garcia <guille@iies.es>, the
+# -fno-pcc-struct-return option is needed to make the standard div()
+# function work - otherwise it returns absolutely incorrect results
+# which breaks the wxImage class. This is true at least for
+# mingw32-gcc2.8.1, don't know about others.
+OPT = -fno-pcc-struct-return -O2 -fno-rtti -fno-exceptions
# Options for ar archiver
# AROPTIONS = crs # For IRIX and Solaris (both SYSVR4).
+AR = $(CROSS)ar
AROPTIONS = ruv
-RANLIB = ranlib
-# RANLIB = echo # Uncomment this line for IRIX and Solaris
-
-# Compiler libraries: defaults to GCC libraries
-# Solaris: -lgen -ldl -lsocket -lnsl
-# and/or possibly -lucb, whatever that is... (-lucb CAUSES MOTIF FILE SELECTION PROBLEMS)
-# or possibly -lgen -lsocket -L/usr/ccs/lib linbnsl.a
-# GCC > 2.7.1 on Solaris: -lstdc++ -lc -lgen -ldl -lsocket -lnsl -lucb
-# SGI: -lPW
-# FreeBSD 2.0: -lg++ -lcompat
-# FreeBSD 1.x: -lcompat doesn`t need, only -lg++ needed
-# AIX: -lCns -lbsd
-# G++ 2.7.0 requires -liostream too.
-# IRIX: -lPW
-#COMPLIBS=-lg++
-#for win95
-#COMPLIBS=-lgcc
+RANLIB = $(CROSS)ranlib
+
+# Extra compiler libraries
+COMPLIBS=
# Compiler or system-specific include paths
-# E.g. some SPARCStations need
-# -I/usr/ucbinclude/sys
-#added for win95
COMPPATHS=
-# HP-specific compiler library: an AIAI convenience
-HPCOMPLIBS=
-
-# LDLIBS for specific GUIs
-
-# The following for LINUX and Motif 2.0:
-#MOTIFLDLIBS = -lwx_motif $(COMPLIBS) -lXm -lXmu -lXpm -lXt -lXext -lX11 -lm
-
-#BASICMOTIFLDLIBS = -lwx_motif /aiai/packages/motif1.2.1/motif/sun4/lib/libXm.a /aiai/packages/motif1.2.1/motif/sun4/lib/libXmu.a /aiai/packages/motif1.2.1/motif/sun4/lib/libXt.a /aiai/packages/motif1.2.1/motif/sun4/lib/libX11.a -lm
-# Apparently libg++ (in COMPLIBS) should go before libXm because of a clash of
-# function name: re_create.
-#BASICMOTIFLDLIBS = -lwx_motif $(COMPLIBS) -lXm -lXmu -lXt -lX11 -lm
-
-#MOTIFLDLIBS = $(BASICMOTIFLDLIBS) $(COMPLIBS)
-
-#XVIEWLDLIBS = -lwx_ol -lxview -lolgx -lX11 -lm $(COMPLIBS)
-#HPLDLIBS=-lwx_hp -lXm -lXmu -lXt -lX11 -lm
-#CYGNUSLDLIBS=
-# Default LDLIBS for XView (don't change this)
-#LDLIBS = $(CYGNUSLDLIBS)
-
-# _ol or _motif (don't need to change, the makefiles will take
-# care of it if you use motif/hp/xview targets)
-#GUISUFFIX=_ol
-
########################## Directories ###############################
-
+OLELIBS=-lole32 -loleaut32 -luuid
WINLIBS=-lstdc++ -lgcc \
- -lwinspool -lwinmm -lshell32 -loldnames \
- -lcomctl32 -lctl3d32 -lodbc32
+ -lwinspool -lwinmm -lshell32 \
+ -lcomctl32 -lctl3d32 -lodbc32 -ladvapi32 \
+ -lodbc32 -lwsock32 -lopengl32 -lglu32 $(OLELIBS) # -loldnames
+
+#WINLIBS=-lstdc++ -lgcc \
+# -lwinspool -lwinmm -lshell32 \
+# -lcomctl32 -lctl3d32 -lodbc32 -ladvapi32 -lwsock32 # -loldnames
# Shouldn't need to change these...
WXSRC=$(WXDIR)/src/msw
WXINC=$(WXDIR)/include
WXBASESRC=$(WXDIR)/src/common
WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wx.$(LIBSUFF)
-INC = -I$(WXINC) -I$(WXDIR)/src/png -I$(WXDIR)/src/zlib $(EXTRAINC)$(COMPPATHS)
-RCLFLAGS=-cpp "cpp -lang-c++ -DWIN32 -D_WIN32 -DRCL_INVOKED -I$(WXWIN)\include"
-#LIBS = -lctl3d32 $(WXLIB) $(WINLIBS) $(COMPLIBS)
-LIBS = $(WXLIB) $(WINLIBS) $(COMPLIBS)
+GNUWIN32EXTRA=-I$(WXDIR)/include/wx/msw/gnuwin32
+
+ifeq ($(MINGW32),1)
+ ifneq "$(findstring 2.95, $(MINGW32VERSION))" ""
+ GNUWIN32EXTRA=
+ endif
+endif
+
+#ifeq ($(MINGW32),1)
+#INC = -I$(WXINC) -I$(WXDIR)/contrib/include -I$(WXDIR)/src/png -I$(WXDIR)/src/jpeg -I$(WXDIR)/src/zlib -I$(WXDIR)/src/tiff $(EXTRAINC) $(COMPPATHS)
+#else
+INC = -I$(WXDIR)/lib/msw$(INCEXT) -I$(WXINC) -I$(WXDIR)/contrib/include -I$(WXDIR)/src/regex -I$(WXDIR)/src/png -I$(WXDIR)/src/jpeg -I$(WXDIR)/src/zlib -I$(WXDIR)/src/tiff $(EXTRAINC) $(COMPPATHS) -I$(WXDIR)/include/wx/msw/gnuwin32
+#endif
+
+RCLFLAGS=-cpp "cpp -lang-c++ -DWIN32 -D_WIN32 -DRCL_INVOKED -I$(WXWIN)/include"
+
+ifdef WXUSINGDLL
+ # png, jpeg, etc are exported from wx dll, so skip and save on link time.
+ LIBS = $(EXTRALIBS) $(WXLIB) $(WINLIBS) $(COMPLIBS)
+else
+ LIBS = $(EXTRALIBS) $(WXLIB) -lregex -lpng -ljpeg -lzlib -ltiff $(WINLIBS) $(COMPLIBS)
+endif
WINFLAGS=-D_X86_=1 -DWIN32 -D_WIN32 $(WINVERSION)
LDLIBS = $(LIBS)
# Directory for object files (don't change)
-OBJDIR = objects$(GUISUFFIX)
+# OBJDIR = objects$(GUISUFFIX)
+OBJDIR = .
-# You shouldn't need to change these...
-CPPFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) -DWXDEBUG='$(WXDEBUG)' $(WARN) $(OPT)
-CFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) -DWXDEBUG='$(WXDEBUG)' $(WARN) $(OPT)
-LDFLAGS = -Wl,--subsystem,windows -mwindows -L$(WXDIR)/lib
+ifeq ($(UNICODE),1)
+ UNIEXT=u
+else
+ UNIEXT=
+endif
-# Extra patch link for XView
-#XVIEW_LINK = $(WXDIR)/src/x/objects_ol/sb_scrol.o # $(WXDIR)/src/x/objects_ol/xvwinlp.o
+ifeq ($(WXMAKINGDLL)$(WXUSINGDLL),)
+ INCEXT=$(UNIEXT)
+else
+ INCEXT=dll$(UNIEXT)
+endif
-.SUFFIXES: .rc .$(RESSUFF) .$(RSCSUFF) .cpp .c
+ifdef WXMAKINGDLL
+ EXTRADLLFLAGS = -DWXMAKINGDLL=1 -D_DLL=1 -D_WINDLL=1
+ WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wxmsw$(WXVERSION)$(UNIEXT).$(LIBSUFF)
+endif
-# Set these in a batch file instead e.g. install/cygnus.bat
-# RCINCLUDE="$(WXDIR)/include/msw;$(WXDIR)/contrib/fafa;$(WXDIR)/contrib/itsybits"; \
-# CPLUS_INCLUDE_PATH=/usr/H-i386-cygwin32/i386-cygwin32/include:/usr/H-i386-cygwin32/lib/gcc-lib/i386-cygwin32/cygnus-2.7.2-961023/include:$(WXDIR)/include/common:$(WXDIR)/include/msw:$(WXDIR)/contrib/fafa:$(WXDIR)/contrib/itsybits; \
-# export CPLUS_INCLUDE_PATH RCINCLUDE; \
+ifdef WXUSINGDLL
+ EXTRADLLFLAGS = -DWXUSINGDLL=1
+ WXLIB=$(WXDIR)/lib/$(LIBPREFIX)wxmsw$(WXVERSION)$(UNIEXT).$(LIBSUFF)
+endif
-.rc.$(RESSUFF): $< $(WXDIR)/include/msw/wx.rc
- $(RC) $(RESFLAGS1) $< $(RESFLAGS2) $*.$(RESSUFF) $(RCLFLAGS)
-.$(RESSUFF).$(RSCSUFF): $<
- $(CVTRES) $< $*.$(RSCSUFF)
+# You shouldn't need to change these...
+CPPFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACPPFLAGS) $(EXTRADLLFLAGS)
+CFLAGS = $(XINCLUDE) $(INC) $(OPTIONS) $(GUI) $(DEBUGFLAGS) $(WARN) $(OPT) $(EXTRACFLAGS) -DWIN32_LEAN_AND_MEAN
+WINDOWSLDFLAGS=-Wl,--subsystem,windows -mwindows
+LDFLAGS = $(WINDOWSLDFLAGS) -L$(WXDIR)/lib -L$(WXDIR)/contrib/lib $(EXTRALDFLAGS)
+
+.SUFFIXES: .rc .$(RESSUFF) .$(RSCSUFF) .cpp .cxx .c
+
+.c.o:
+ $(CC) -c $(CFLAGS) -o $@ $*.c
+
+.cxx.o:
+ $(CC) -c $(CPPFLAGS) -o $@ $*.cxx
.$(SRCSUFF).$(OBJSUFF):
$(CC) -c $(CPPFLAGS) -o $@ $*.$(SRCSUFF)
-.c.o:
- $(CC) -c $(CPPFLAGS) -o $@ $*.c
projects / wxWidgets.git / blobdiff