//bool LoadFile(wxImage* image, wxInputStream& stream);
//bool SaveFile(wxImage* image, wxOutputStream& stream);
//virtual int GetImageCount( wxInputStream& stream );
- //bool CanRead( wxInputStream& stream );
bool CanRead( const wxString& name );
-
+ %Rename(CanReadStream, bool, CanRead( wxInputStream& stream ));
+
void SetName(const wxString& name);
void SetExtension(const wxString& extension);
void SetType(long type);
//---------------------------------------------------------------------------
+
+DocStr(wxPyImageHandler,
+"This is the base class for implementing image file loading/saving, and
+image creation from data, all written in Python. To create a custom
+image handler derive a new class from wx.PyImageHandler and provide
+the following methods::
+
+ def DoCanRead(self, stream) --> bool
+ '''Check if this handler can read the image on the stream'''
+
+ def LoadFile(self, image, stream, verbose, index) --> bool
+ '''Load image data from the stream and load it into image.'''
+
+ def SaveFile(self, image, stream, verbose) --> bool
+ '''Save the iamge data in image to the stream using
+ this handler's image file format.'''
+
+ def GetImageCount(self, stream) --> int
+ '''If this image format can hold more than one image,
+ how many does the image on the stream have?'''
+
+To activate your handler create an instance of it and pass it to
+`wx.Image_AddHandler`. Be sure to call `SetName`, `SetType`, and
+`SetExtension` from your constructor.
+", "");
+
+class wxPyImageHandler: public wxImageHandler {
+public:
+ %pythonAppend wxPyImageHandler() "self._SetSelf(self)"
+ wxPyImageHandler();
+ void _SetSelf(PyObject *self);
+};
+
+
+//---------------------------------------------------------------------------
+
+
class wxImageHistogram /* : public wxImageHistogramBase */
{
public:
wxImageHistogram();
DocStr(MakeKey, "Get the key in the histogram for the given RGB values", "");
- static unsigned long MakeKey(unsigned char r,
- unsigned char g,
- unsigned char b);
+ static unsigned long MakeKey(byte r,
+ byte g,
+ byte b);
DocDeclAStr(
- bool, FindFirstUnusedColour(unsigned char *OUTPUT,
- unsigned char *OUTPUT,
- unsigned char *OUTPUT,
- unsigned char startR = 1,
- unsigned char startG = 0,
- unsigned char startB = 0 ) const,
+ bool, FindFirstUnusedColour(byte *OUTPUT,
+ byte *OUTPUT,
+ byte *OUTPUT,
+ byte startR = 1,
+ byte startG = 0,
+ byte startB = 0 ) const,
"FindFirstUnusedColour(int startR=1, int startG=0, int startB=0) -> (success, r, g, b)",
"Find first colour that is not used in the image and has higher RGB
values than startR, startG, startB. Returns a tuple consisting of a
DocStr(GetCountRGB,
"Returns the pixel count for the given RGB values.", "");
- unsigned long GetCountRGB(unsigned char r,
- unsigned char g,
- unsigned char b) {
+ unsigned long GetCountRGB(byte r,
+ byte g,
+ byte b) {
unsigned long key = wxImageHistogram::MakeKey(r, g, b);
wxImageHistogramEntry e = (*self)[key];
return e.value;
//---------------------------------------------------------------------------
+DocStr(wxImage,
+"A platform-independent image class. An image can be created from
+data, or using `wx.Bitmap.ConvertToImage`, or loaded from a file in a
+variety of formats. Functions are available to set and get image
+bits, so it can be used for basic image manipulation.
+
+A wx.Image cannot be drawn directly to a `wx.DC`. Instead, a
+platform-specific `wx.Bitmap` object must be created from it using the
+`wx.BitmapFromImage` constructor. This bitmap can then be drawn in a
+device context, using `wx.DC.DrawBitmap`.
+
+One colour value of the image may be used as a mask colour which will
+lead to the automatic creation of a `wx.Mask` object associated to the
+bitmap object.
+
+wx.Image supports alpha channel data, that is in addition to a byte
+for the red, green and blue colour components for each pixel it also
+stores a byte representing the pixel opacity. An alpha value of 0
+corresponds to a transparent pixel (null opacity) while a value of 255
+means that the pixel is 100% opaque.
+
+Unlike RGB data, not all images have an alpha channel and before using
+`GetAlpha` you should check if this image contains an alpha channel
+with `HasAlpha`. Note that currently only images loaded from PNG files
+with transparency information will have an alpha channel.", "");
+
+
+%{
+// Pull the nested class out to the top level for SWIG's sake
+#define wxImage_RGBValue wxImage::RGBValue
+#define wxImage_HSVValue wxImage::HSVValue
+%}
+
+DocStr(wxImage_RGBValue,
+"An object that contains values for red, green and blue which represent
+the value of a color. It is used by `wx.Image.HSVtoRGB` and
+`wx.Image.RGBtoHSV`, which converts between HSV color space and RGB
+color space.", "");
+class wxImage_RGBValue
+{
+public:
+ DocCtorStr(
+ wxImage_RGBValue(byte r=0, byte g=0, byte b=0),
+ "Constructor.", "");
+ byte red;
+ byte green;
+ byte blue;
+};
+
+
+DocStr(wxImage_HSVValue,
+"An object that contains values for hue, saturation and value which
+represent the value of a color. It is used by `wx.Image.HSVtoRGB` and
+`wx.Image.RGBtoHSV`, which +converts between HSV color space and RGB
+color space.", "");
+class wxImage_HSVValue
+{
+public:
+ DocCtorStr(
+ wxImage_HSVValue(double h=0.0, double s=0.0, double v=0.0),
+ "Constructor.", "");
+ double hue;
+ double saturation;
+ double value;
+};
+
+
class wxImage : public wxObject {
public:
%typemap(out) wxImage*; // turn off this typemap
DocCtorStr(
wxImage( const wxString& name, long type = wxBITMAP_TYPE_ANY, int index = -1 ),
- "", "");
+ "Loads an image from a file.",
+ "
+ :param name: Name of the file from which to load the image.
+
+ :param type: May be one of the following:
+
+ ==================== =======================================
+ wx.BITMAP_TYPE_BMP Load a Windows bitmap file.
+ wx.BITMAP_TYPE_GIF Load a GIF bitmap file.
+ wx.BITMAP_TYPE_JPEG Load a JPEG bitmap file.
+ wx.BITMAP_TYPE_PNG Load a PNG bitmap file.
+ wx.BITMAP_TYPE_PCX Load a PCX bitmap file.
+ wx.BITMAP_TYPE_PNM Load a PNM bitmap file.
+ wx.BITMAP_TYPE_TIF Load a TIFF bitmap file.
+ wx.BITMAP_TYPE_XPM Load a XPM bitmap file.
+ wx.BITMAP_TYPE_ICO Load a Windows icon file (ICO).
+ wx.BITMAP_TYPE_CUR Load a Windows cursor file (CUR).
+ wx.BITMAP_TYPE_ANI Load a Windows animated cursor file (ANI).
+ wx.BITMAP_TYPE_ANY Will try to autodetect the format.
+ ==================== =======================================
+
+ :param index: Index of the image to load in the case that the
+ image file contains multiple images. This is only used by GIF,
+ ICO and TIFF handlers. The default value (-1) means to choose
+ the default image and is interpreted as the first image (the
+ one with index=0) by the GIF and TIFF handler and as the
+ largest and most colourful one by the ICO handler.
+
+:see: `wx.ImageFromMime`, `wx.ImageFromStream`, `wx.ImageFromStreamMime`,
+ `wx.EmptyImage`, `wx.ImageFromBitmap`, `wx.ImageFromData`,
+ `wx.ImageFromDataWithAlpha`
+");
~wxImage();
// Alternate constructors
DocCtorStrName(
wxImage(const wxString& name, const wxString& mimetype, int index = -1),
- "", "",
+ "Loads an image from a file, using a MIME type string (such as
+'image/jpeg') to specify image type.", "
+
+:see: `wx.Image`",
ImageFromMime);
DocCtorStrName(
wxImage(wxInputStream& stream, long type = wxBITMAP_TYPE_ANY, int index = -1),
- "", "",
+ "Loads an image from an input stream, or any readable Python file-like
+object.", "
+
+:see: `wx.Image`",
ImageFromStream);
DocCtorStrName(
wxImage(wxInputStream& stream, const wxString& mimetype, int index = -1 ),
- "", "",
+ "Loads an image from an input stream, or any readable Python file-like
+object, specifying the image format with a MIME type string.", "
+
+:see: `wx.Image`",
ImageFromStreamMime);
%extend {
%RenameDocCtor(
EmptyImage,
"Construct an empty image of a given size, optionally setting all
-pixels to black.", "",
+pixels to black.", "
+
+:see: `wx.Image`",
wxImage(int width=0, int height=0, bool clear = true))
{
if (width > 0 && height > 0)
%RenameDocCtor(
ImageFromBitmap,
- "Construct an Image from a `wx.Bitmap`.", "",
+ "Construct an Image from a `wx.Bitmap`.", "
+
+:see: `wx.Image`",
wxImage(const wxBitmap &bitmap))
{
return new wxImage(bitmap.ConvertToImage());
ImageFromData,
"Construct an Image from a buffer of RGB bytes. Accepts either a
string or a buffer object holding the data and the length of the data
-must be width*height*3.", "",
+must be width*height*3.", "
+
+:see: `wx.Image`",
wxImage(int width, int height, buffer data, int DATASIZE))
{
if (DATASIZE != width*height*3) {
ImageFromDataWithAlpha,
"Construct an Image from a buffer of RGB bytes with an Alpha channel.
Accepts either a string or a buffer object holding the data and the
-length of the data must be width*height*3.", "",
+length of the data must be width*height*3 bytes, and the length of the
+alpha data must be width*height bytes.", "
+
+:see: `wx.Image`",
wxImage(int width, int height, buffer data, int DATASIZE, buffer alpha, int ALPHASIZE))
{
if (DATASIZE != width*height*3) {
// TODO: wxImage( char** xpmData );
-
// Turn it back on again
%typemap(out) wxImage* { $result = wxPyMake_wxObject($1, $owner); }
- void Create( int width, int height );
- void Destroy();
+ DocDeclStr(
+ void , Create( int width, int height, bool clear=true ),
+ "Creates a fresh image. If clear is ``True``, the new image will be
+initialized to black. Otherwise, the image data will be uninitialized.", "");
+
+ DocDeclStr(
+ void , Destroy(),
+ "Destroys the image data.", "");
+
- wxImage Scale( int width, int height );
- wxImage ShrinkBy( int xFactor , int yFactor ) const ;
- wxImage& Rescale(int width, int height);
+ DocDeclStr(
+ wxImage , Scale( int width, int height ),
+ "Returns a scaled version of the image. This is also useful for scaling
+bitmaps in general as the only other way to scale bitmaps is to blit a
+`wx.MemoryDC` into another `wx.MemoryDC`.", "
+
+:see: `Rescale`");
+
+ DocDeclStr(
+ wxImage , ShrinkBy( int xFactor , int yFactor ) const ,
+ "Return a version of the image scaled smaller by the given factors.", "");
+
+ DocDeclStr(
+ wxImage& , Rescale(int width, int height),
+ "Changes the size of the image in-place by scaling it: after a call to
+this function, the image will have the given width and height.
+
+Returns the (modified) image itself.", "
+
+:see: `Scale`");
+
// resizes the image in place
- wxImage& Resize( const wxSize& size, const wxPoint& pos,
- int r = -1, int g = -1, int b = -1 );
+ DocDeclStr(
+ wxImage& , Resize( const wxSize& size, const wxPoint& pos,
+ int r = -1, int g = -1, int b = -1 ),
+ "Changes the size of the image in-place without scaling it, by adding
+either a border with the given colour or cropping as necessary. The
+image is pasted into a new image with the given size and background
+colour at the position pos relative to the upper left of the new
+image. If red = green = blue = -1 then use either the current mask
+colour if set or find, use, and set a suitable mask colour for any
+newly exposed areas.
+
+Returns the (modified) image itself.", "
+
+:see: `Size`");
+
+
+ DocDeclStr(
+ void , SetRGB( int x, int y, byte r, byte g, byte b ),
+ "Sets the pixel at the given coordinate. This routine performs
+bounds-checks for the coordinate so it can be considered a safe way to
+manipulate the data, but in some cases this might be too slow so that
+the data will have to be set directly. In that case you will have to
+get access to the image data using the `GetData` method.", "");
- void SetRGB( int x, int y, unsigned char r, unsigned char g, unsigned char b );
- %Rename(SetRGBRect,
+ DocDeclStrName(
void, SetRGB( const wxRect& rect,
- unsigned char r, unsigned char g, unsigned char b ));
+ byte r, byte g, byte b ),
+ "Sets the colour of the pixels within the given rectangle. This routine
+performs bounds-checks for the rectangle so it can be considered a
+safe way to manipulate the data.", "",
+ SetRGBRect);
+
+ DocDeclStr(
+ byte , GetRed( int x, int y ),
+ "Returns the red intensity at the given coordinate.", "");
+
+ DocDeclStr(
+ byte , GetGreen( int x, int y ),
+ "Returns the green intensity at the given coordinate.", "");
+
+ DocDeclStr(
+ byte , GetBlue( int x, int y ),
+ "Returns the blue intensity at the given coordinate.", "");
+
- unsigned char GetRed( int x, int y );
- unsigned char GetGreen( int x, int y );
- unsigned char GetBlue( int x, int y );
+ DocDeclStr(
+ void , SetAlpha(int x, int y, byte alpha),
+ "Sets the alpha value for the given pixel. This function should only be
+called if the image has alpha channel data, use `HasAlpha` to check
+for this.", "");
+
+ DocDeclStr(
+ byte , GetAlpha(int x, int y),
+ "Returns the alpha value for the given pixel. This function may only be
+called for the images with alpha channel, use `HasAlpha` to check for
+this.
+
+The returned value is the *opacity* of the image, i.e. the value of 0
+corresponds to the fully transparent pixels while the value of 255 to
+the fully opaque pixels.", "");
+
+ DocDeclStr(
+ bool , HasAlpha(),
+ "Returns true if this image has alpha channel, false otherwise.", "
- void SetAlpha(int x, int y, unsigned char alpha);
- unsigned char GetAlpha(int x, int y);
- bool HasAlpha();
+:see: `GetAlpha`, `SetAlpha`");
+
DocDeclStr(
void , InitAlpha(),
DocDeclStr(
bool , IsTransparent(int x, int y,
- unsigned char threshold = wxIMAGE_ALPHA_THRESHOLD) const,
- "Returns True if this pixel is masked or has an alpha value less than
-the spcified threshold.", "");
+ byte threshold = wxIMAGE_ALPHA_THRESHOLD) const,
+ "Returns ``True`` if this pixel is masked or has an alpha value less
+than the spcified threshold.", "");
// find first colour that is not used in the image and has higher
DocDeclStr(
bool , ConvertAlphaToMask(byte threshold = wxIMAGE_ALPHA_THRESHOLD),
- "If the image has alpha channel, this method converts it to mask. All pixels
-with alpha value less than ``threshold`` are replaced with mask colour and the
-alpha channel is removed. Mask colour is chosen automatically using
-`FindFirstUnusedColour`.
+ "If the image has alpha channel, this method converts it to mask. All
+pixels with alpha value less than ``threshold`` are replaced with the
+mask colour and the alpha channel is removed. The mask colour is
+chosen automatically using `FindFirstUnusedColour`.
If the image image doesn't have alpha channel, ConvertAlphaToMask does
nothing.", "");
DocDeclStr(
- bool , ConvertColourToAlpha( unsigned char r, unsigned char g, unsigned char b ),
+ bool , ConvertColourToAlpha( byte r, byte g, byte b ),
"This method converts an image where the original alpha information is
only available as a shades of a colour (actually shades of grey)
typically when you draw anti-aliased text into a bitmap. The DC
- // Set image's mask to the area of 'mask' that has <mr,mg,mb> colour
- bool SetMaskFromImage(const wxImage & mask,
- byte mr, byte mg, byte mb);
+ DocDeclStr(
+ bool , SetMaskFromImage(const wxImage & mask,
+ byte mr, byte mg, byte mb),
+ "Sets the image's mask so that the pixels that have RGB value of
+``(mr,mg,mb)`` in ``mask`` will be masked in this image. This is done
+by first finding an unused colour in the image, setting this colour as
+the mask colour and then using this colour to draw all pixels in the
+image who corresponding pixel in mask has given RGB value.
+
+Returns ``False`` if ``mask`` does not have same dimensions as the
+image or if there is no unused colour left. Returns ``True`` if the
+mask was successfully applied.
+
+Note that this method involves computing the histogram, which is
+computationally intensive operation.", "");
+
// void DoFloodFill (wxCoord x, wxCoord y,
// const wxBrush & fillBrush,
// int style = wxFLOOD_SURFACE,
// int LogicalFunction = wxCOPY /* currently unused */ ) ;
- static bool CanRead( const wxString& name );
- static int GetImageCount( const wxString& name, long type = wxBITMAP_TYPE_ANY );
+ DocDeclStr(
+ static bool , CanRead( const wxString& filename ),
+ "Returns True if the image handlers can read this file.", "");
+
+ DocDeclStr(
+ static int , GetImageCount( const wxString& filename, long type = wxBITMAP_TYPE_ANY ),
+ "If the image file contains more than one image and the image handler
+is capable of retrieving these individually, this function will return
+the number of available images.", "");
+
+
+ DocDeclStr(
+ bool , LoadFile( const wxString& name, long type = wxBITMAP_TYPE_ANY, int index = -1 ),
+ "Loads an image from a file. If no handler type is provided, the
+library will try to autodetect the format.", "");
+
+ DocDeclStrName(
+ bool , LoadFile( const wxString& name, const wxString& mimetype, int index = -1 ),
+ "Loads an image from a file, specifying the image type with a MIME type
+string.", "",
+ LoadMimeFile);
+
- bool LoadFile( const wxString& name, long type = wxBITMAP_TYPE_ANY, int index = -1 );
- %Rename(LoadMimeFile, bool, LoadFile( const wxString& name, const wxString& mimetype, int index = -1 ));
+ DocDeclStr(
+ bool , SaveFile( const wxString& name, int type ),
+ "Saves an image in the named file.", "");
- bool SaveFile( const wxString& name, int type );
- %Rename(SaveMimeFile, bool, SaveFile( const wxString& name, const wxString& mimetype ));
+
+ DocDeclStrName(
+ bool , SaveFile( const wxString& name, const wxString& mimetype ),
+ "Saves an image in the named file.", "",
+ SaveMimeFile);
+
+
+ DocDeclStrName(
+ static bool , CanRead( wxInputStream& stream ),
+ "Returns True if the image handlers can read an image file from the
+data currently on the input stream, or a readable Python file-like
+object.", "",
+ CanReadStream);
- %Rename(CanReadStream, static bool, CanRead( wxInputStream& stream ));
- %Rename(LoadStream, bool, LoadFile( wxInputStream& stream, long type = wxBITMAP_TYPE_ANY, int index = -1 ));
- %Rename(LoadMimeStream, bool, LoadFile( wxInputStream& stream, const wxString& mimetype, int index = -1 ));
- bool Ok();
- int GetWidth();
- int GetHeight();
+ DocDeclStrName(
+ bool , LoadFile( wxInputStream& stream, long type = wxBITMAP_TYPE_ANY, int index = -1 ),
+ "Loads an image from an input stream or a readable Python file-like
+object. If no handler type is provided, the library will try to
+autodetect the format.", "",
+ LoadStream);
+
+
+ DocDeclStrName(
+ bool , LoadFile( wxInputStream& stream, const wxString& mimetype, int index = -1 ),
+ "Loads an image from an input stream or a readable Python file-like
+object, using a MIME type string to specify the image file format.", "",
+ LoadMimeStream);
+
+
+ DocDeclStr(
+ bool , Ok(),
+ "Returns true if image data is present.", "");
+
+ DocDeclStr(
+ int , GetWidth(),
+ "Gets the width of the image in pixels.", "");
+
+ DocDeclStr(
+ int , GetHeight(),
+ "Gets the height of the image in pixels.", "");
+
%extend {
+ DocStr(GetSize,
+ "Returns the size of the image in pixels.", "");
wxSize GetSize() {
wxSize size(self->GetWidth(), self->GetHeight());
return size;
}
}
- wxImage GetSubImage(const wxRect& rect);
+
+ DocDeclStr(
+ wxImage , GetSubImage(const wxRect& rect),
+ "Returns a sub image of the current one as long as the rect belongs
+entirely to the image.", "");
+
- // Paste the image or part of this image into an image of the given size at the pos
- // any newly exposed areas will be filled with the rgb colour
- // by default if r = g = b = -1 then fill with this image's mask colour or find and
- // set a suitable mask colour
- wxImage Size( const wxSize& size, const wxPoint& pos,
- int r = -1, int g = -1, int b = -1 ) const;
+ DocDeclStr(
+ wxImage , Size( const wxSize& size, const wxPoint& pos,
+ int r = -1, int g = -1, int b = -1 ) const,
+ "Returns a resized version of this image without scaling it by adding
+either a border with the given colour or cropping as necessary. The
+image is pasted into a new image with the given size and background
+colour at the position ``pos`` relative to the upper left of the new
+image. If red = green = blue = -1 then use either the current mask
+colour if set or find, use, and set a suitable mask colour for any
+newly exposed areas.", "
+
+:see: `Resize`");
+
+
+ DocDeclStr(
+ wxImage , Copy(),
+ "Returns an identical copy of the image.", "");
+
+ DocDeclStr(
+ void , Paste( const wxImage &image, int x, int y ),
+ "Pastes ``image`` into this instance and takes care of the mask colour
+and any out of bounds problems.", "");
- wxImage Copy();
- void Paste( const wxImage &image, int x, int y );
//unsigned char *GetData();
//void SetData( unsigned char *data );
DocStr(GetDataBuffer,
"Returns a writable Python buffer object that is pointing at the RGB
-image data buffer inside the wx.Image.", "");
+image data buffer inside the wx.Image. You need to ensure that you do
+not use this buffer object after the image has been destroyed.", "");
PyObject* GetDataBuffer()
{
buffer data = self->GetData();
DocStr(SetDataBuffer,
"Sets the internal image data pointer to point at a Python buffer
-object. This can save a copy of the data but you must ensure that the
-buffer object lives longer than the wx.Image does.", "");
+object. This can save making an extra copy of the data but you must
+ensure that the buffer object lives longer than the wx.Image does.", "");
void SetDataBuffer(buffer data, int DATASIZE)
{
if (DATASIZE != self->GetWidth() * self->GetHeight() * 3) {
DocStr(GetDataBuffer,
"Returns a writable Python buffer object that is pointing at the Alpha
-data buffer inside the wx.Image.", "");
+data buffer inside the wx.Image. You need to ensure that you do not
+use this buffer object after the image has been destroyed.", "");
PyObject* GetAlphaBuffer()
{
buffer data = self->GetAlpha();
DocStr(SetDataBuffer,
"Sets the internal image alpha pointer to point at a Python buffer
-object. This can save a copy of the data but you must ensure that the
-buffer object lives longer than the wx.Image does.", "");
+object. This can save making an extra copy of the data but you must
+ensure that the buffer object lives as long as the wx.Image does.", "");
void SetAlphaBuffer(buffer alpha, int ALPHASIZE)
{
if (ALPHASIZE != self->GetWidth() * self->GetHeight()) {
}
}
- void SetMaskColour( unsigned char r, unsigned char g, unsigned char b );
+
+
+ DocDeclStr(
+ void , SetMaskColour( byte r, byte g, byte b ),
+ "Sets the mask colour for this image (and tells the image to use the
+mask).", "");
+
DocDeclAStr(
- /*bool*/ void , GetOrFindMaskColour( unsigned char *OUTPUT,
- unsigned char *OUTPUT,
- unsigned char *OUTPUT ) const,
+ /*bool*/ void , GetOrFindMaskColour( byte *OUTPUT,
+ byte *OUTPUT,
+ byte *OUTPUT ) const,
"GetOrFindMaskColour() -> (r,g,b)",
"Get the current mask colour or find a suitable colour.", "");
- unsigned char GetMaskRed();
- unsigned char GetMaskGreen();
- unsigned char GetMaskBlue();
- void SetMask( bool mask = true );
- bool HasMask();
+ DocDeclStr(
+ byte , GetMaskRed(),
+ "Gets the red component of the mask colour.", "");
+
+ DocDeclStr(
+ byte , GetMaskGreen(),
+ "Gets the green component of the mask colour.", "");
+
+ DocDeclStr(
+ byte , GetMaskBlue(),
+ "Gets the blue component of the mask colour.", "");
+
+ DocDeclStr(
+ void , SetMask( bool mask = true ),
+ "Specifies whether there is a mask or not. The area of the mask is
+determined by the current mask colour.", "");
+
+ DocDeclStr(
+ bool , HasMask(),
+ "Returns ``True`` if there is a mask active, ``False`` otherwise.", "");
+
+
+ DocDeclStr(
+ wxImage , Rotate(double angle, const wxPoint & centre_of_rotation,
+ bool interpolating = true, wxPoint * offset_after_rotation = NULL) const ,
+ "Rotates the image about the given point, by ``angle`` radians. Passing
+``True`` to ``interpolating`` results in better image quality, but is
+slower. If the image has a mask, then the mask colour is used for the
+uncovered pixels in the rotated image background. Otherwise, black
+will be used as the fill colour.
+
+Returns the rotated image, leaving this image intact.", "");
+
+ DocDeclStr(
+ wxImage , Rotate90( bool clockwise = true ) ,
+ "Returns a copy of the image rotated 90 degrees in the direction
+indicated by ``clockwise``.", "");
+
+ DocDeclStr(
+ wxImage , Mirror( bool horizontally = true ) ,
+ "Returns a mirrored copy of the image. The parameter ``horizontally``
+indicates the orientation.", "");
+
- wxImage Rotate(double angle, const wxPoint & centre_of_rotation,
- bool interpolating = true, wxPoint * offset_after_rotation = NULL) const ;
- wxImage Rotate90( bool clockwise = true ) ;
- wxImage Mirror( bool horizontally = true ) ;
+ DocDeclStr(
+ void , Replace( byte r1, byte g1, byte b1,
+ byte r2, byte g2, byte b2 ),
+ "Replaces the colour specified by ``(r1,g1,b1)`` by the colour
+``(r2,g2,b2)``.", "");
- void Replace( unsigned char r1, unsigned char g1, unsigned char b1,
- unsigned char r2, unsigned char g2, unsigned char b2 );
+ DocDeclStr(
+ wxImage , ConvertToGreyscale( double lr = 0.299,
+ double lg = 0.587,
+ double lb = 0.114 ) const,
+ "Convert to greyscale image. Uses the luminance component (Y) of the
+image. The luma value (YUV) is calculated using (R * lr) + (G * lg) + (B * lb),
+defaults to ITU-T BT.601", "");
+
- // convert to monochrome image (<r,g,b> will be replaced by white, everything else by black)
- wxImage ConvertToMono( unsigned char r, unsigned char g, unsigned char b ) const;
+ DocDeclStr(
+ wxImage , ConvertToMono( byte r, byte g, byte b ) const,
+ "Returns monochromatic version of the image. The returned image has
+white colour where the original has ``(r,g,b)`` colour and black
+colour everywhere else.", "");
+
+
+ DocDeclStr(
+ void , SetOption(const wxString& name, const wxString& value),
+ "Sets an image handler defined option. For example, when saving as a
+JPEG file, the option ``wx.IMAGE_OPTION_QUALITY`` is used, which is a
+number between 0 and 100 (0 is terrible, 100 is very good).", "
+
+ ================================= ===
+ wx.IMAGE_OPTION_BMP_FORMAT
+ wx.IMAGE_OPTION_CUR_HOTSPOT_X
+ wx.IMAGE_OPTION_CUR_HOTSPOT_Y
+ wx.IMAGE_OPTION_RESOLUTION
+ wx.IMAGE_OPTION_RESOLUTIONX
+ wx.IMAGE_OPTION_RESOLUTIONY
+ wx.IMAGE_OPTION_RESOLUTIONUNIT
+ wx.IMAGE_OPTION_QUALITY
+ wx.IMAGE_OPTION_BITSPERSAMPLE
+ wx.IMAGE_OPTION_SAMPLESPERPIXEL
+ wx.IMAGE_OPTION_COMPRESSION
+ wx.IMAGE_OPTION_IMAGEDESCRIPTOR
+ wx.IMAGE_OPTION_PNG_FORMAT
+ wx.IMAGE_OPTION_PNG_BITDEPTH
+ ================================= ===
+
+:see: `HasOption`, `GetOption`, `GetOptionInt`, `SetOptionInt`");
+
+ DocDeclStrName(
+ void, SetOption(const wxString& name, int value),
+ "Sets an image option as an integer.", "
+
+:see: `HasOption`, `GetOption`, `GetOptionInt`, `SetOption`",
+ SetOptionInt);
+
+ DocDeclStr(
+ wxString , GetOption(const wxString& name) const,
+ "Gets the value of an image handler option.", "
- void SetOption(const wxString& name, const wxString& value);
- %Rename(SetOptionInt, void, SetOption(const wxString& name, int value));
- wxString GetOption(const wxString& name) const;
- int GetOptionInt(const wxString& name) const;
- bool HasOption(const wxString& name) const;
+:see: `HasOption`, `GetOptionInt`, `SetOption`, `SetOptionInt`");
+
+ DocDeclStr(
+ int , GetOptionInt(const wxString& name) const,
+ "Gets the value of an image handler option as an integer. If the given
+option is not present, the function returns 0.", "
+
+:see: `HasOption`, `GetOption`, `SetOptionInt`, `SetOption`");
+
+ DocDeclStr(
+ bool , HasOption(const wxString& name) const,
+ "Returns true if the given option is present.", "
+
+:see: `GetOption`, `GetOptionInt`, `SetOption`, `SetOptionInt`");
+
unsigned long CountColours( unsigned long stopafter = (unsigned long) -1 );
unsigned long ComputeHistogram( wxImageHistogram& h );
static void AddHandler( wxImageHandler *handler );
static void InsertHandler( wxImageHandler *handler );
static bool RemoveHandler( const wxString& name );
- static wxString GetImageExtWildcard();
-
+ %extend {
+ static PyObject* GetHandlers() {
+ wxList& list = wxImage::GetHandlers();
+ return wxPy_ConvertList(&list);
+ }
+ }
+
+ DocDeclStr(
+ static wxString , GetImageExtWildcard(),
+ "Iterates all registered wxImageHandler objects, and returns a string
+containing file extension masks suitable for passing to file open/save
+dialog boxes.", "");
+
+
MustHaveApp(ConvertToBitmap);
MustHaveApp(ConvertToMonoBitmap);
return bitmap;
}
- wxBitmap ConvertToMonoBitmap( unsigned char red,
- unsigned char green,
- unsigned char blue ) {
+ wxBitmap ConvertToMonoBitmap( byte red,
+ byte green,
+ byte blue ) {
wxImage mono = self->ConvertToMono( red, green, blue );
wxBitmap bitmap( mono, 1 );
return bitmap;
}
}
+
+ DocDeclStr(
+ void , RotateHue(double angle),
+ "Rotates the hue of each pixel of the image. Hue is a double in the
+range -1.0..1.0 where -1.0 is -360 degrees and 1.0 is 360 degrees", "");
+
+ DocDeclStr(
+ static wxImage_HSVValue , RGBtoHSV(wxImage_RGBValue rgb),
+ "Converts a color in RGB color space to HSV color space.", "");
+
+ DocDeclStr(
+ static wxImage_RGBValue , HSVtoRGB(wxImage_HSVValue hsv),
+ "Converts a color in HSV color space to RGB color space.", "");
+
+
%pythoncode { def __nonzero__(self): return self.Ok() }
};
-// See also wxPy_ReinitStockObjects in helpers.cpp
%immutable;
const wxImage wxNullImage;
%mutable;
projects / wxWidgets.git / blobdiff