// Purpose: topic overview
// Author: wxWidgets team
// RCS-ID: $Id$
-// Licence: wxWindows license
+// Licence: wxWindows licence
/////////////////////////////////////////////////////////////////////////////
-/*!
+/**
+
+@page overview_cmndlg Common Dialogs
+
+Classes:
+
+@li wxColourDialog
+@li wxFontDialog
+@li wxPrintDialog
+@li wxFileDialog
+@li wxDirDialog
+@li wxTextEntryDialog
+@li wxPasswordEntryDialog
+@li wxMessageDialog
+@li wxSingleChoiceDialog
+@li wxMultiChoiceDialog
+
+Common dialog classes and functions encapsulate commonly-needed dialog box
+requirements. They are all 'modal', grabbing the flow of control until the user
+dismisses the dialog, to make them easy to use within an application.
+
+Some dialogs have both platform-dependent and platform-independent
+implementations, so that if underlying windowing systems do not provide the
+required functionality, the generic classes and functions can stand in. For
+example, under MS Windows, wxColourDialog uses the standard colour selector.
+There is also an equivalent called wxGenericColourDialog for other platforms,
+and a macro defines wxColourDialog to be the same as wxGenericColourDialog on
+non-MS Windows platforms. However, under MS Windows, the generic dialog can
+also be used, for testing or other purposes.
+
+@li @ref overview_cmndlg_colour
+@li @ref overview_cmndlg_font
+@li @ref overview_cmndlg_print
+@li @ref overview_cmndlg_file
+@li @ref overview_cmndlg_dir
+@li @ref overview_cmndlg_textentry
+@li @ref overview_cmndlg_password
+@li @ref overview_cmndlg_msg
+@li @ref overview_cmndlg_singlechoice
+@li @ref overview_cmndlg_multichoice
+
+
+<hr>
+
+
+@section overview_cmndlg_colour wxColourDialog Overview
+
+Classes: wxColourDialog, wxColourData
+
+The wxColourDialog presents a colour selector to the user, and returns with
+colour information.
+
+@subsection overview_cmndlg_colour_msw The MS Windows Colour Selector
+
+Under Windows, the native colour selector common dialog is used. This presents
+a dialog box with three main regions: at the top left, a palette of 48
+commonly-used colours is shown. Under this, there is a palette of 16
+'custom colours' which can be set by the application if desired. Additionally,
+the user may open up the dialog box to show a right-hand panel containing
+controls to select a precise colour, and add it to the custom colour palette.
- @page overview_cmndlg Common dialogs overview
+@subsection overview_cmndlg_colour_generic The Generic Colour Selector
- Classes: #wxColourDialog, #wxFontDialog, #wxPrintDialog, #wxFileDialog,
- #wxDirDialog, #wxTextEntryDialog, #wxPasswordEntryDialog,
- #wxMessageDialog, #wxSingleChoiceDialog, #wxMultiChoiceDialog
+Under non-MS Windows platforms, the colour selector is a simulation of most of
+the features of the MS Windows selector. Two palettes of 48 standard and 16
+custom colours are presented, with the right-hand area containing three sliders
+for the user to select a colour from red, green and blue components. This
+colour may be added to the custom colour palette, and will replace either the
+currently selected custom colour, or the first one in the palette if none is
+selected. The RGB colour sliders are not optional in the generic colour
+selector. The generic colour selector is also available under MS Windows; use
+the name wxGenericColourDialog.
- Common dialog classes and functions encapsulate commonly-needed dialog box requirements.
- They are all 'modal', grabbing the flow of control until the user dismisses the dialog,
- to make them easy to use within an application.
+@subsection overview_cmndlg_colour_example Example
+
+In the samples/dialogs directory, there is an example of using the
+wxColourDialog class. Here is an excerpt, which sets various parameters of a
+wxColourData object, including a grey scale for the custom colours. If the user
+did not cancel the dialog, the application retrieves the selected colour and
+uses it to set the background of a window.
+
+@code
+wxColourData data;
+data.SetChooseFull(true);
+for (int i = 0; i < 16; i++)
+{
+ wxColour colour(i*16, i*16, i*16);
+ data.SetCustomColour(i, colour);
+}
- Some dialogs have both platform-dependent and platform-independent implementations,
- so that if underlying windowing systems do not provide the required functionality,
- the generic classes and functions can stand in. For example, under MS Windows, wxColourDialog
- uses the standard colour selector. There is also an equivalent called wxGenericColourDialog
- for other platforms, and a macro defines wxColourDialog to be the same as wxGenericColourDialog
- on non-MS Windows platforms. However, under MS Windows, the generic dialog can also be
- used, for testing or other purposes.
+wxColourDialog dialog(this, &data);
+if (dialog.ShowModal() == wxID_OK)
+{
+ wxColourData retData = dialog.GetColourData();
+ wxColour col = retData.GetColour();
+ wxBrush brush(col, wxSOLID);
+ myWindow->SetBackground(brush);
+ myWindow->Clear();
+ myWindow->Refresh();
+}
+@endcode
- @li @ref overview_cmndlg_colour
- @li @ref overview_cmndlg_font
- @li @ref overview_cmndlg_print
- @li @ref overview_cmndlg_file
- @li @ref overview_cmndlg_dir
- @li @ref overview_cmndlg_textentry
- @li @ref overview_cmndlg_password
- @li @ref overview_cmndlg_msg
- @li @ref overview_cmndlg_singlechoice
- @li @ref overview_cmndlg_multichoice
+@section overview_cmndlg_font wxFontDialog Overview
+Classes: wxFontDialog, wxFontData
- <hr>
+The wxFontDialog presents a font selector to the user, and returns with font
+and colour information.
+@subsection overview_cmndlg_font_msw The MS Windows Font Selector
- @section overview_cmndlg_colour wxColourDialog overview
+Under Windows, the native font selector common dialog is used. This presents a
+dialog box with controls for font name, point size, style, weight, underlining,
+strikeout and text foreground colour. A sample of the font is shown on a white
+area of the dialog box. Note that in the translation from full MS Windows fonts
+to wxWidgets font conventions, strikeout is ignored and a font family (such as
+Swiss or Modern) is deduced from the actual font name (such as Arial or
+Courier).
- Classes: #wxColourDialog, #wxColourData
-
- The wxColourDialog presents a colour selector to the user, and returns
- with colour information.
-
- @subsection overview_cmndlg_colour_msw The MS Windows colour selector
-
- Under Windows, the native colour selector common dialog is used. This
- presents a dialog box with three main regions: at the top left, a
- palette of 48 commonly-used colours is shown. Under this, there is a
- palette of 16 'custom colours' which can be set by the application if
- desired. Additionally, the user may open up the dialog box to show
- a right-hand panel containing controls to select a precise colour, and add
- it to the custom colour palette.
+@subsection overview_cmndlg_font_generic The Generic Font Selector
- @subsection overview_cmndlg_colour_generic The generic colour selector
+Under non-MS Windows platforms, the font selector is simpler. Controls for font
+family, point size, style, weight, underlining and text foreground colour are
+provided, and a sample is shown upon a white background. The generic font
+selector is also available under MS Windows; use the name wxGenericFontDialog.
- Under non-MS Windows platforms, the colour selector is a simulation of
- most of the features of the MS Windows selector. Two palettes of 48
- standard and 16 custom colours are presented, with the right-hand area
- containing three sliders for the user to select a colour from red,
- green and blue components. This colour may be added to the custom colour
- palette, and will replace either the currently selected custom colour,
- or the first one in the palette if none is selected. The RGB colour sliders
- are not optional in the generic colour selector. The generic colour
- selector is also available under MS Windows; use the name
- wxGenericColourDialog.
+@subsection overview_cmndlg_font_example Example
- @subsection overview_cmndlg_colour_example Example
+In the samples/dialogs directory, there is an example of using the wxFontDialog
+class. The application uses the returned font and colour for drawing text on a
+canvas. Here is an excerpt:
- In the samples/dialogs directory, there is an example of using
- the wxColourDialog class. Here is an excerpt, which
- sets various parameters of a wxColourData object, including
- a grey scale for the custom colours. If the user did not cancel
- the dialog, the application retrieves the selected colour and
- uses it to set the background of a window.
+@code
+wxFontData data;
+data.SetInitialFont(canvasFont);
+data.SetColour(canvasTextColour);
- @code
- wxColourData data;
- data.SetChooseFull(true);
- for (int i = 0; i 16; i++)
- {
- wxColour colour(i*16, i*16, i*16);
- data.SetCustomColour(i, colour);
- }
+wxFontDialog dialog(this, &data);
+if (dialog.ShowModal() == wxID_OK)
+{
+ wxFontData retData = dialog.GetFontData();
+ canvasFont = retData.GetChosenFont();
+ canvasTextColour = retData.GetColour();
+ myWindow->Refresh();
+}
+@endcode
- wxColourDialog dialog(this, &data);
- if (dialog.ShowModal() == wxID_OK)
- {
- wxColourData retData = dialog.GetColourData();
- wxColour col = retData.GetColour();
- wxBrush brush(col, wxSOLID);
- myWindow-SetBackground(brush);
- myWindow-Clear();
- myWindow-Refresh();
- }
- @endcode
+@section overview_cmndlg_print wxPrintDialog Overview
+Classes: wxPrintDialog, wxPrintData
- @section overview_cmndlg_font wxFontDialog overview
+This class represents the print and print setup common dialogs. You may obtain
+a wxPrinterDC device context from a successfully dismissed print dialog.
- Classes: #wxFontDialog, #wxFontData
+The samples/printing example shows how to use it: see @ref overview_printing
+for an excerpt from this example.
- The wxFontDialog presents a font selector to the user, and returns
- with font and colour information.
- @subsection overview_cmndlg_font_msw The MS Windows font selector
+@section overview_cmndlg_file wxFileDialog Overview
- Under Windows, the native font selector common dialog is used. This
- presents a dialog box with controls for font name, point size, style, weight,
- underlining, strikeout and text foreground colour. A sample of the
- font is shown on a white area of the dialog box. Note that
- in the translation from full MS Windows fonts to wxWidgets font
- conventions, strikeout is ignored and a font family (such as
- Swiss or Modern) is deduced from the actual font name (such as Arial
- or Courier).
+Classes: wxFileDialog
- @subsection overview_cmndlg_font_generic The generic font selector
+Pops up a file selector box. On Windows and GTK 2.4+, this is the common file
+selector dialog. In X, this is a file selector box with somewhat less
+functionality. The path and filename are distinct elements of a full file
+pathname.
- Under non-MS Windows platforms, the font selector is simpler.
- Controls for font family, point size, style, weight,
- underlining and text foreground colour are provided, and
- a sample is shown upon a white background. The generic font selector
- is also available under MS Windows; use the name wxGenericFontDialog.
+If path is "", the current directory will be used. If filename is "", no
+default filename will be supplied. The wildcard determines what files are
+displayed in the file selector, and file extension supplies a type extension
+for the required filename. Flags may be a combination of wxFD_OPEN, wxFD_SAVE,
+wxFD_OVERWRITE_PROMPT, wxFD_HIDE_READONLY, wxFD_FILE_MUST_EXIST, wxFD_MULTIPLE,
+wxFD_CHANGE_DIR or 0.
- @subsection overview_cmndlg_font_example Example
+Both the X and Windows versions implement a wildcard filter. Typing a filename
+containing wildcards (*, ?) in the filename text item, and clicking on Ok, will
+result in only those files matching the pattern being displayed. In the X
+version, supplying no default name will result in the wildcard filter being
+inserted in the filename text item; the filter is ignored if a default name is
+supplied.
- In the samples/dialogs directory, there is an example of using
- the wxFontDialog class. The application uses the returned font
- and colour for drawing text on a canvas. Here is an excerpt:
+The wildcard may be a specification for multiple types of file with a
+description for each, such as:
- @code
- wxFontData data;
- data.SetInitialFont(canvasFont);
- data.SetColour(canvasTextColour);
+@verbatim
+"BMP files (*.bmp)|*.bmp|GIF files (*.gif)|*.gif"
+@endverbatim
- wxFontDialog dialog(this, &data);
- if (dialog.ShowModal() == wxID_OK)
- {
- wxFontData retData = dialog.GetFontData();
- canvasFont = retData.GetChosenFont();
- canvasTextColour = retData.GetColour();
- myWindow-Refresh();
- }
- @endcode
+@section overview_cmndlg_dir wxDirDialog Overview
+Classes: wxDirDialog
- @section overview_cmndlg_print wxPrintDialog overview
+This dialog shows a directory selector dialog, allowing the user to select a
+single directory.
- Classes: #wxPrintDialog, #wxPrintData
- This class represents the print and print setup common dialogs.
- You may obtain a #wxPrinterDC device context from
- a successfully dismissed print dialog.
+@section overview_cmndlg_textentry wxTextEntryDialog Overview
- The samples/printing example shows how to use it: see @ref overview_printing for
- an excerpt from this example.
+Classes: wxTextEntryDialog
+This is a dialog with a text entry field. The value that the user entered is
+obtained using wxTextEntryDialog::GetValue().
- @section overview_cmndlg_file wxFileDialog overview
+@section overview_cmndlg_password wxPasswordEntryDialog Overview
- Classes: #wxFileDialog
+Classes: wxPasswordEntryDialog
- Pops up a file selector box. In Windows and GTK2.4+, this is the common
- file selector dialog. In X, this is a file selector box with somewhat less
- functionality. The path and filename are distinct elements of a full file pathname.
+This is a dialog with a password entry field. The value that the user entered
+is obtained using wxTextEntryDialog::GetValue().
- If path is "", the current directory will be used. If filename is "",
- no default filename will be supplied. The wildcard determines what files
- are displayed in the file selector, and file extension supplies a type
- extension for the required filename. Flags may be a combination of wxFD_OPEN,
- wxFD_SAVE, wxFD_OVERWRITE_PROMPT, wxFD_HIDE_READONLY, wxFD_FILE_MUST_EXIST,
- wxFD_MULTIPLE, wxFD_CHANGE_DIR or 0.
- Both the X and Windows versions implement a wildcard filter. Typing a
- filename containing wildcards (*, ?) in the filename text item, and
- clicking on Ok, will result in only those files matching the pattern being
- displayed. In the X version, supplying no default name will result in the
- wildcard filter being inserted in the filename text item; the filter is
- ignored if a default name is supplied.
+@section overview_cmndlg_msg wxMessageDialog Overview
- The wildcard may be a specification for multiple
- types of file with a description for each, such as:
+Classes: wxMessageDialog
- @code
- "BMP files (*.bmp)|*.bmp|GIF files (*.gif)|*.gif"
- @endcode
+This dialog shows a message, plus buttons that can be chosen from OK, Cancel,
+Yes, and No. Under Windows, an optional icon can be shown, such as an
+exclamation mark or question mark.
+The return value of wxMessageDialog::ShowModal() indicates which button the
+user pressed.
- @section overview_cmndlg_dir wxDirDialog overview
+@section overview_cmndlg_singlechoice wxSingleChoiceDialog Overview
- Classes: #wxDirDialog
+Classes: wxSingleChoiceDialog
- This dialog shows a directory selector dialog, allowing the user to select
- a single directory.
+This dialog shows a list of choices, plus OK and (optionally) Cancel. The user
+can select one of them. The selection can be obtained from the dialog as an
+index, a string or client data.
+@section overview_cmndlg_multichoice wxMultiChoiceDialog Overview
- @section overview_cmndlg_textentry wxTextEntryDialog overview
+Classes: wxMultiChoiceDialog
- Classes: #wxTextEntryDialog
-
- This is a dialog with a text entry field. The value that the user
- entered is obtained using wxTextEntryDialog::GetValue.
-
-
-
- @section overview_cmndlg_password wxPasswordEntryDialog overview
-
- Classes: #wxPasswordEntryDialog
-
- This is a dialog with a password entry field. The value that the user
- entered is obtained using wxTextEntryDialog::GetValue.
-
-
-
- @section overview_cmndlg_msg wxMessageDialog overview
-
- Classes: #wxMessageDialog
-
- This dialog shows a message, plus buttons that can be chosen from OK, Cancel, Yes, and No.
- Under Windows, an optional icon can be shown, such as an exclamation mark or question mark.
-
- The return value of wxMessageDialog::ShowModal indicates
- which button the user pressed.
-
-
-
- @section overview_cmndlg_singlechoice wxSingleChoiceDialog overview
-
- Classes: #wxSingleChoiceDialog
-
- This dialog shows a list of choices, plus OK and (optionally) Cancel. The user can
- select one of them. The selection can be obtained from the dialog as an index,
- a string or client data.
-
-
-
- @section overview_cmndlg_multichoice wxMultiChoiceDialog overview
-
- Classes: #wxMultiChoiceDialog
-
- This dialog shows a list of choices, plus OK and (optionally) Cancel. The user can
- select one or more of them.
+This dialog shows a list of choices, plus OK and (optionally) Cancel. The user
+can select one or more of them.
*/
projects / wxWidgets.git / blobdiff