GetCurrentSelection() was documented but not present in all ports (just MSW and GTK...

[wxWidgets.git] / docs / latex / wx / renderer.tex

diff --git a/docs/latex/wx/renderer.tex b/docs/latex/wx/renderer.tex
index 3e5f7b52c53b1304ea374c8b4ca6efbc553f2733..1c1277d32613322d5116e3264166ffcc9b44fa58 100644 (file)
--- a/docs/latex/wx/renderer.tex
+++ b/docs/latex/wx/renderer.tex
@@ -13,13 +13,13 @@
 
 First, a brief introduction to wxRenderer and why it is needed.
 
 
 First, a brief introduction to wxRenderer and why it is needed.
 

-Usually wxWindows uses the underlying low level GUI system to draw all the
-controls -- this is what we mean when we say that it is a ``native'' framework.
+Usually wxWidgets uses the underlying low level GUI system to draw all the
+controls - this is what we mean when we say that it is a ``native'' framework.

 However not all controls exist under all (or even any) platforms and in this
 However not all controls exist under all (or even any) platforms and in this

-case wxWindows provides a default, generic, implementation of them written in
-wxWindows itself.
+case wxWidgets provides a default, generic, implementation of them written in
+wxWidgets itself.

 
 

-These controls don't have the native appearance if only the standard
+These controls don't have the native appearance if only the tandard

 line drawing and other graphics primitives are used, because the native
 appearance is different under different platforms while the lines are always
 drawn in the same way.
 line drawing and other graphics primitives are used, because the native
 appearance is different under different platforms while the lines are always
 drawn in the same way.


@@ -52,6 +52,11 @@ the rendering functions should always prepare it.
 combination of the \texttt{wxCONTROL\_XXX} constants below.
 \end{itemize}
 
 combination of the \texttt{wxCONTROL\_XXX} constants below.
 \end{itemize}
 

+Note that each drawing function restores the \helpref{wxDC}{wxdc} attributes if
+it changes them, so it is safe to assume that the same pen, brush and colours
+that were active before the call to this function are still in effect after it.
+
+

 \wxheading{Constants}
 
 The following rendering flags are defined:
 \wxheading{Constants}
 
 The following rendering flags are defined:


@@ -68,7 +73,8 @@ enum
     wxCONTROL_CURRENT    = 0x00000010,  // mouse is currently over the control
     wxCONTROL_SELECTED   = 0x00000020,  // selected item in e.g. listbox
     wxCONTROL_CHECKED    = 0x00000040,  // (check/radio button) is checked
     wxCONTROL_CURRENT    = 0x00000010,  // mouse is currently over the control
     wxCONTROL_SELECTED   = 0x00000020,  // selected item in e.g. listbox
     wxCONTROL_CHECKED    = 0x00000040,  // (check/radio button) is checked

-    wxCONTROL_CHECKABLE  = 0x00000080   // (menu) item can be checked
+    wxCONTROL_CHECKABLE  = 0x00000080,  // (menu) item can be checked
+    wxCONTROL_UNDETERMINED = wxCONTROL_CHECKABLE  // (check) undetermined state

 };
 \end{verbatim}
 
 };
 \end{verbatim}
 


@@ -91,11 +97,60 @@ No base class
 Virtual destructor as for any base class.
 
 
 Virtual destructor as for any base class.
 
 

+\membersection{wxRendererNative::DrawCheckBox}\label{wxrenderernativedrawcheckbox}
+
+\func{void}{DrawCheckBox}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a check box (used by wxDataViewCtrl).
+
+\arg{flags} may have the \texttt{wxCONTROL\_CHECKED}, \texttt{wxCONTROL\_CURRENT} or
+\texttt{wxCONTROL\_UNDETERMINED} bit set.
+
+
+\membersection{wxRendererNative::DrawComboBoxDropButton}\label{wxrenderernativedrawcomboboxdropbutton}
+
+\func{void}{DrawComboBoxDropButton}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a button like the one used by \helpref{wxComboBox}{wxcombobox} to show a
+drop down window. The usual appearance is a downwards pointing arrow.
+
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED} or \texttt{wxCONTROL\_CURRENT} bit set.
+
+
+\membersection{wxRendererNative::DrawDropArrow}\label{wxrenderernativedrawdroparrow}
+
+\func{void}{DrawDropArrow}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a drop down arrow that is suitable for use outside a combo box. Arrow will have
+transparent background.
+
+\arg{rect} is not entirely filled by the arrow. Instead, you should use bounding
+rectangle of a drop down button which arrow matches the size you need.
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED} or \texttt{wxCONTROL\_CURRENT} bit set.
+
+

 \membersection{wxRendererNative::DrawHeaderButton}\label{wxrenderernativedrawheaderbutton}
 
 \membersection{wxRendererNative::DrawHeaderButton}\label{wxrenderernativedrawheaderbutton}
 

-\func{void}{DrawHeaderButton}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}}
+\func{void}{DrawHeaderButton}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags = 0}, \param{wxHeaderSortIconType }{sortArrow = wxHDR\_SORT\_ICON\_NONE}, \param{wxHeaderButtonParams* }{params = NULL}}
+
+Draw the header control button (used, for example, by
+\helpref{wxListCtrl}{wxlistctrl}).  Depending on platforms the
+\arg{flags} parameter may support the \texttt{wxCONTROL\_SELECTED}
+\texttt{wxCONTROL\_DISABLED} and \texttt{wxCONTROL\_CURRENT} bits.
+The \arg{sortArrow} parameter can be one of
+\texttt{wxHDR\_SORT\_ICON\_NONE}, \texttt{wxHDR\_SORT\_ICON\_UP}, or 
+\texttt{wxHDR\_SORT\_ICON\_DOWN}.  Additional values controlling the
+drawing of a text or bitmap label can be passed in \arg{params}.
+
+
+\membersection{wxRendererNative::DrawPushButton}\label{wxrenderernativedrawpushbutton}

 
 

-Draw the header control button (used by \helpref{wxListCtrl}{wxlistctrl}).
+\func{void}{DrawPushButton}{\param{wxWindow *}{win}, \param{wxDC\& }{dc}, \param{const wxRect\& }{rect}, \param{int }{flags}}
+
+Draw a blank push button that looks very similar to \helpref{wxButton}{wxbutton}.
+
+\arg{flags} may have the \texttt{wxCONTROL\_PRESSED}, \texttt{wxCONTROL\_CURRENT} or
+\texttt{wxCONTROL\_ISDEFAULT} bit set.

 
 
 \membersection{wxRendererNative::DrawSplitterBorder}\label{wxrenderernativedrawsplitterborder}
 
 
 \membersection{wxRendererNative::DrawSplitterBorder}\label{wxrenderernativedrawsplitterborder}


@@ -112,7 +167,7 @@ well.
 \func{void}{DrawSplitterSash}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxSize\& }{size}, \param{wxCoord }{position}, \param{wxOrientation }{orient}, \param{int }{flags = 0}}
 
 Draw a sash. The \arg{orient} parameter defines whether the sash should be
 \func{void}{DrawSplitterSash}{\param{wxWindow* }{win}, \param{wxDC\& }{dc}, \param{const wxSize\& }{size}, \param{wxCoord }{position}, \param{wxOrientation }{orient}, \param{int }{flags = 0}}
 
 Draw a sash. The \arg{orient} parameter defines whether the sash should be

-vertical or horizontal and how should the \arg{position} be interpreted.
+vertical or horizontal and how the \arg{position} should be interpreted.

 
 
 \membersection{wxRendererNative::DrawTreeItemButton}\label{wxrenderernativedrawtreeitembutton}
 
 
 \membersection{wxRendererNative::DrawTreeItemButton}\label{wxrenderernativedrawtreeitembutton}


@@ -149,6 +204,14 @@ is the default renderer implementation, others have platform-specific default
 renderer which can be retrieved by calling \helpref{GetDefault}{wxrenderernativegetdefault}.
 
 
 renderer which can be retrieved by calling \helpref{GetDefault}{wxrenderernativegetdefault}.
 
 

+\membersection{wxRendererNative::GetHeaderButtonHeight}\label{wxrenderernativegetheaderbuttonheight}
+
+\func{int}{GetHeaderButtonHeight}{\param{const wxWindow* }{win}}
+
+Returns the height of a header button, either a fixed platform height if available, or a 
+generic height based on the window's font.
+
+

 \membersection{wxRendererNative::GetSplitterParams}\label{wxrenderernativegetsplitterparams}
 
 \func{wxSplitterRenderParams}{GetSplitterParams}{\param{const wxWindow* }{win}}
 \membersection{wxRendererNative::GetSplitterParams}\label{wxrenderernativegetsplitterparams}
 
 \func{wxSplitterRenderParams}{GetSplitterParams}{\param{const wxWindow* }{win}}